sr-users August 2009

sr-users@lists.kamailio.org

55 participants
77 discussions

[Kamailio-Users] What happens with filled htables?
by catalina oancea 26 Aug '09

26 Aug '09

Hello I use the htable module a lot but the only problem, when I add a new entry in a htable, is when I will delete it. My question is: if the hash table is completely filled and I try to add a new value to it, do I get an error or is an old value automatically deleted to be able to write my new value? If an old value was automatically deleted whenever a new value is added, I wouldn't have to bother deleting the values I no longer need. Thanks Catalina

3 20

[Serusers] translate message from TLS to UDP
by qiulei212 26 Aug '09

26 Aug '09

hi everyone: sorry to trouble you again! I use the SER as a proxy between a SIP-softphone and the asterisk. The message between the sip-phone and SER is TLS and i want to translant the message by UDP to my asterisk.HOW would i do? I have tried the forward_udp , t_relay_to_tls ,t_relay_to_udp and no useless. which function should i prefer? thanks!! qiulei212 2009-08-26

2 1

[Serusers] problems with stun using uas
by lorenzo 25 Aug '09

25 Aug '09

hi! i'm the developer of a sip app that happens to be connecting to a sip server that's using SER. i'm having troublewith the way SER handles incoming calls to my stun-enabled ua (which is placed behind a router) I have two clients running on the same machine. one is my app, the other is Gizmo5. when i make an outgoing call from my app to the user i'm logged in with in Gizmo5, everything works. but when i call my app from the Gizmo5 app, sniffing the network traffic with wireshark, the only thing i see happening is the sip server sending a 100 Giving a try to the calling ua. The reason i'm posting this here, is that i know it's not a bug with my app, since everything works fine when i don't use stun. (note that i don't have direct access to ser's configuration) this is my app's REGISTER request (note that it has a *public ip*): REGISTER sip:proxy01.sipphone.com SIP/2.0 Via: SIP/2.0/UDP 93.148.135.54:5060;rport;branch=z9hG4bK70207 Max-Forwards: 70 To: <sip:asymmetric@proxy01.sipphone.com> From: <sip:asymmetric@proxy01.sipphone.com>;tag=z9hG4bK57274073 Call-ID: 557402852938(a)93.148.135.54 CSeq: 2 REGISTER Contact: <sip:asymmetric@93.148.135.54:5060;transport=udp> Expires: 3600 User-Agent: mjsip stack 1.6 Authorization: Digest username="asymmetric", realm="proxy01.sipphone.com", nonce="xxx", uri="sip:proxy01.sipphone.com", algorithm=md5, response="yyy" Content-Length: 0 and the response: SIP/2.0 200 OK Via: SIP/2.0/UDP 93.148.135.54:5060;rport=12810;branch=z9hG4bK70207 To: <sip:asymmetric@proxy01.sipphone.com>;tag=92390300a369f0d75803e369c733575e.50aa From: <sip:asymmetric@proxy01.sipphone.com>;tag=z9hG4bK57274073 Call-ID: 557402852938(a)93.148.135.54 CSeq: 2 REGISTER Contact: <sip:asymmetric@93.148.135.54:5060;transport=udp>;expires=3600 Content-Length: 0 Gizmo5's app REGISTER request: REGISTER sip:proxy01.sipphone.com SIP/2.0 Via: SIP/2.0/UDP 192.168.1.100:64064;branch=z9hG4bK-d87543-bbc1e2712d417352-1--d87543-;rport Max-Forwards: 70 Contact: <sip:17474492586@93.148.135.54:10251> To: <sip:17474492586@proxy01.sipphone.com> From: <sip:17474492586@proxy01.sipphone.com>;tag=f43be43c Call-ID: b1b4a060512d4b0c1250955005@YXN5bW1ldHJpYy5sb2NhbA.. CSeq: 2 REGISTER Expires: 1800 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER User-Agent: MacGizmo/2.0.02 (Gizmo-s2n1) Authorization: Digest username="17474492586",realm="proxy01.sipphone.com",nonce="xxx",uri="sip:proxy01.sipphone.com",response="yyy",algorithm=MD5 Content-Length: 0 and response: SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.1.100:64064;branch=z9hG4bK-d87543-bbc1e2712d417352-1--d87543-;rport=10251;received=93.148.135.54 To: <sip:17474492586@proxy01.sipphone.com>;tag=92390300a369f0d75803e369c733575e.c70f From: <sip:17474492586@proxy01.sipphone.com>;tag=f43be43c Call-ID: b1b4a060512d4b0c1250955005@YXN5bW1ldHJpYy5sb2NhbA.. CSeq: 2 REGISTER P-Behind-NAT: Yes Contact: <sip:17474492586@93.148.135.54:10251>;expires=1800 Content-Length: 0 in the second case, the client gets the P-Behind-NAT flag set to Yes, and for a good reason. But then why is this all i get when trying to call the first ua? : SIP/2.0 100 Giving a try Via: SIP/2.0/UDP 192.168.1.100:64064;branch=z9hG4bK-d87543-7fb07a028db5c137-1--d87543-;rport=10251;received=93.148.135.54 To: <sip:asymmetric@proxy01.sipphone.com> From: <sip:17474492586@proxy01.sipphone.com>;tag=bc135372 Call-ID: 88d41c746d51146e1250955219@YXN5bW1ldHJpYy5sb2NhbA.. CSeq: 1 INVITE P-Behind-NAT: Yes Content-Length: 0 whereas the inverse works: SIP/2.0 180 Ringing Via: SIP/2.0/UDP 198.65.166.131;branch=z9hG4bKf3b1.bc014575.0 Via: SIP/2.0/UDP 93.148.135.54:5060;rport=13171;branch=z9hG4bK82654 Record-Route: <sip:198.65.166.131;lr;ftag=z9hG4bK90319798> Contact: <sip:17474492586@proxy01.sipphone.com> To: <sip:17474492586@proxy01.sipphone.com>;tag=6ae0e759 From: "asymmetric"<sip:asymmetric@proxy01.sipphone.com>;tag=z9hG4bK90319798 Call-ID: 593542951976(a)93.148.135.54 CSeq: 1 INVITE User-Agent: MacGizmo/2.0.02 (Gizmo-s2n1) Content-Length: 0 CQBM: 244 -- thanks a lot! asymmetric

3 3

Presence over NAT
by Andrew O. Zhukov 25 Aug '09

25 Aug '09

Is there any samples let's forwarded Subscribe fix the Contact: I mean Proxy URI not the customer mapped. Let's the followed NOTIFY go over proxy not P2P. Thanks in avance. Andrew O. Zhukov

5 9

[Kamailio-Users] kamailio 3.0 - the time before freezing
by Daniel-Constantin Mierla 25 Aug '09

25 Aug '09

Hello everybody, during the last IRC devel meeting, we pinned end of summer to be the time to enter testing phase for the new major release - codenamed kamailio 3.0. There was quite a lot of brand new features, considering that most of devel effort was directed to integration. A try to collect new items is available at: http://sip-router.org/wiki/features/new-in-devel Of course, all ser features are available as well, resulting a large amount of new stuff in kamailio 3.0 vs kamailio 1.5.x. See: http://sip-router.org/benefits/ http://www.iptel.org/ser/features I propose to start the testing phase sometime next week. Meanwhile, let's see if something important was forgotten from kamailio core or tm. To my knowledge: - path support in tm - Andrei has it on his todo afaik - in a way or another, it must get in next release - drop compatibility - drop reply in reply_route - internally drop and exit are now differentiated by core, needs review and update of handling after running the routes - on my to-do Apart seas, all Kamailio modules are fully ugraded to new core - I started but lack of test env + busy summer resulted in delays - can be done during testing period, being just api updates. If you have discovered something else, let us know. Thanks, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

7 36

[Kamailio-Users] exchanging CDR data between Asterisk servers
by Klaus Darilion 24 Aug '09

24 Aug '09

Hi! I have the following setup: PSTN<------>Asterisk<-----SIP-->Asterisk GW/LCR \ \ ... \ \ ... \ --SIP-->Asterisk \ ... ------->Asterisk The GW-Asterisk just does the gatewaying stuff and writes the CDRs for the billing system. The other Asterisk servers handle all the services (IVR, REGISTER, ...) Some scenarios require to write some additional data to the CDRs. For outgoing calls this is not a problem (I signal the extra data in a SIP header and set a CDR() variable in the GW asterisk). My problem are incoming calls. The "extra data" is only known to the service Asterisk, but the CDR is written by the GW Asterisk. Does anybody know a method how to signal the "extra data" during the call from the server Asterisk back to the GW Asterisk und put it into a CDR() variable? Regards Klaus

3 4

[Kamailio-Users] TLS TCP error
by shehzad p 24 Aug '09

24 Aug '09

Hello, My Kamailio (tls version) is configured to handle TCP as well as TLS traffic. Making calls from softphone using TCP only works fine. But my TLS traffic has been stucked. I can see lots of error as below in messages file: ====================================================================== Aug 24 06:05:01 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcpconn_connect: tcp_blocking_connect failed Aug 24 06:05:01 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcp_send: connect failed Aug 24 06:05:01 ns110 /usr/local/sbin/kamailio[24273]: ERROR:tm:msg_send: tcp_send failed Aug 24 06:08:10 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcp_blocking_connect: poll error: flags 18 Aug 24 06:08:10 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcp_blocking_connect: failed to retrieve SO_ERROR (110) Connection timed out Aug 24 06:08:10 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcpconn_connect: tcp_blocking_connect failed Aug 24 06:08:10 ns110 /usr/local/sbin/kamailio[24273]: ERROR:core:tcp_send: connect failed Aug 24 06:08:10 ns110 /usr/local/sbin/kamailio[24273]: ERROR:tm:msg_send: tcp_send failed Aug 24 06:08:25 ns110 /usr/local/sbin/kamailio[24279]: ERROR:core:_tls_read: something wrong in SSL: 5 Aug 24 06:08:25 ns110 /usr/local/sbin/kamailio[24279]: ERROR:core:tcp_read_req: failed to read Aug 24 06:09:00 ns110 /usr/local/sbin/kamailio[24277]: INFO:core:tls_accept: client did not present a certificate ================================================================================= I am very confused, because with the same configuration, another kamailio server works very well without any error. I am not able to know what could be the issue in this server with same configuration. What could be the cause and resolution of this errors? Any help will be appreciated Thanks in advance, Mohammed Shehzad -- View this message in context: http://www.nabble.com/TLS-TCP-error-tp25114961p25114961.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

2 3

[Kamailio-Users] new PV class: $sel(name)
by Daniel-Constantin Mierla 24 Aug '09

24 Aug '09

Hello, there is a new PV class that provides access to SER select variables. A list with available selects can be found at: http://sip-router.org/wiki/cookbooks/selects/devel Therefore, all Kamailio modules relying on PV framework can get access to select values without any change. See example of usage from config at: http://sip-router.org/wiki/cookbooks/pseudo-variables/devel#selects Cheers, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

1 0

[Kamailio-Users] sip phone behind the nat
by aiphie 24 Aug '09

24 Aug '09

Hi,body. I'm using the kamailio as a sip server,If in the local network ,It works very well ,But when i set the sip server in the internet, When starting voice chat,Two sip phone will receive the behind net ip address(sip phone's local ip address). How i can configure sip server(kamailio) let sip server send sip phone's peer ip address using front nat ip address(internet ip address)? Any body can give me how to realize it? Thank you! --Aiphie 2009-08-21 “欢乐家庭总动员”--第七届全球通演出季网络互动有惊喜，千元大奖送给您！移动新推GPRS流量优惠系列新套餐，手机上网省钱又省心！

3 6

Re: [Kamailio-Users] sip phone behind the nat
by Daniel-Constantin Mierla 24 Aug '09

24 Aug '09

On 24.08.2009 9:38 Uhr, aiphie wrote: > hi,all > you probably forgot to cc to the mailing list. please do so all the time - there might be people that can help faster and better. > > I have use sed command to clear the comment which in front of regarding nat,But it's always use local network IP to fill session description protocol->connection information->connection address,I know sip server can rewrite this message item,Can you tell me how to let sip server rewrite it? > annex is my config file,please look what wrong in this? > It is very unlikely that one will debug a whole config file for you. You just need to investigate yourself and come to mailing list with specific questions. The media IP is updated with what RTPPproxy is listening on. What is the command used to start rtpproxy? Cheers, Daniel > thank you! > > --aiphie > > > > ----- Original Message ----- > From: "Daniel-Constantin Mierla" <miconda(a)gmail.com> > To: "aiphie" <chengwu8(a)139.com> > Cc: <users(a)lists.kamailio.org> > Sent: Friday, August 21, 2009 6:55 PM > Subject: Re: [Kamailio-Users] sip phone behind the nat > > > >> Hello, >> >> On 21.08.2009 12:52 Uhr, aiphie wrote: >> >>> Hi,body. >>> I'm using the kamailio as a sip server,If in the local network ,It >>> works very well ,But when i set the sip server in the internet, When >>> starting voice chat,Two sip phone will receive the behind net ip >>> address(sip phone's local ip address). >>> How i can configure sip server(kamailio) let sip server send sip >>> phone's peer ip address using front nat ip address(internet ip address)? >>> Any body can give me how to realize it? >>> >> you need to enable nathelper module + appropriate lines in config file >> and install rtpptoxy. >> >> If you check the default config file you will see at the top some >> comments regarding nat traversal and what sed command you can use to >> enable it. >> >> Cheers, >> Daniel >> >> -- >> Daniel-Constantin Mierla >> * http://www.asipto.com/ >> > > -- Daniel-Constantin Mierla * http://www.asipto.com/

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2009