sr-users November 2010

sr-users@lists.kamailio.org

75 participants
112 discussions

Re: [SR-Users] Variable substitution with Dispatcher
by Lee Archer 11 Nov '10

11 Nov '10

Hi, can anyone answer this? Regards Lee From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Lee Archer Sent: 10 November 2010 10:25 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] Variable substitution with Dispatcher Hi, I am trying to compare 3.0.4 and 3.1 and the following works in 3.1 but not 3.0.4. Should this work in 3.0 or was it only fixed for 3.1? ds_select_dst($tU,"4"); Regards Lee

2 1

noack and t_relay erros errors
by JR Richardson 11 Nov '10

11 Nov '10

Hi All, I'm still getting these errors and I'm struggling to resolve the problem. I think I'm missing an append_branch or something simple in my config, a little guiedance will be appriciated. The error: Nov 11 10:23:26 sip-router1 /usr/local/sbin/kamailio[23739]: ERROR: tm [t_fwd.c:1379]: ERROR: t_forward_nonack: no branches for forwarding Nov 11 10:23:26 sip-router1 /usr/local/sbin/kamailio[23739]: ERROR: tm [tm.c:1300]: ERROR: w_t_relay_to: t_relay_to failed The sip graph causing the error: http://pastebin.com/VHhQ1sJY My config: http://pastebin.com/BYn4g5ur Do I need to have a mechanism to deal with a 486 form the carrier? Thanks. JR -- JR Richardson Engineering for the Masses

2 2

Extension state
by Lucas Alvarez 10 Nov '10

10 Nov '10

Hi, is there a way "database driven" to know who is using the phone? Thanks in advance. Lucas

2 1

multidomain: running multiple kamailio on one host
by MÉSZÁROS Mihály 10 Nov '10

10 Nov '10

Hello all! Is there any known problem to run multiple kamailio/sip-router instance in one host. I need this to handle multidomain situation. The multidomain what is built in is not satisfactory, because the UA-s what are from varying vendors. And some has strange or a very limited SIP implementation. Some can only register ip address, some can use RFC3263, but some can use only DNS A record. :( Any answer, suggestion appreciated very well! Thanks, Misi

7 8

Asterisk 1.6 and Kamailio 3.1 realtime integration tutorial
by Daniel-Constantin Mierla 10 Nov '10

10 Nov '10

Hello, I got the time to upgrade my tutorial about Asterisk and Kamailio realtime integration to latest stable release of Kamailio, v3.1.0: You can find the document at: * http://asipto.com/u/c Hope it is useful for some people within this community. Cheers, Daniel -- Daniel-Constantin Mierla Kamailio (OpenSER) Advanced Trainings Nov 22-25, 2010, Berlin, Germany Jan 24-26, 2011, Irvine, CA, USA http://www.asipto.com

1 0

Re: [SR-Users] "append_rpid_hf()" and "append_hf()" issues
by Dominguez Jover, Ricardo 10 Nov '10

10 Nov '10

Hi Alex, I think I'm doing what you say, look at the configuration my config file: append_rpid_hf("$fU", ";party=calling;id-type=subscriber;privacy=off;screen=yes"); consume_credentials(); (the following lines are commented) ####### I also tested the following # append_hf("Remote-Party-ID:<sip:$avp(rpid)@$avp(domain);user=phone>;privacy=$avp(privacy);party=calling\r\n"); # append_hf("P-Asserted-Identity:<sip:$avp(rpid)@$avp(domain)>\r\n", "Call-ID"); # consume_credentials(); Is that right or you mean something like this: append_rpid_hf("$avp(rpid)", ";party=calling;id-type=subscriber;privacy=off;screen=yes"); consume_credentials(); ? Anyway I've just tested this last configuration and I can't see "Remote Party ID" headers in SIP message. Kind regards, Ricardo -----Mensaje original----- De: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] En nombre de Alex Balashov Enviado el: miércoles, 10 de noviembre de 2010 11:24 Para: sr-users(a)lists.sip-router.org Asunto: Re: [SR-Users] "append_rpid_hf()" and "append_hf()" issues Ricardo, The 'rpid' value is loaded from the 'subscriber' table as part of the authentication functions; if you consume_credentials() before it, it will be gone. You should append_rpid_hf() the RPID header first, and consume_credentials() afterward. Cheers, -- Alex

1 0

Variable substitution with Dispatcher
by Lee Archer 10 Nov '10

10 Nov '10

Hi, I am trying to compare 3.0.4 and 3.1 and the following works in 3.1 but not 3.0.4. Should this work in 3.0 or was it only fixed for 3.1? ds_select_dst($tU,"4"); Regards Lee

1 0

"append_rpid_hf()" and "append_hf()" issues
by Dominguez Jover, Ricardo 10 Nov '10

10 Nov '10

Hi everybody, I've been testing and setting up kamalio 3.0.3 with MySQL since a few weeks ago. All the basic functionalities are working properly, but now I have an issue which I'm not been able to solve by myself. I've read documentation and posts, but no idea about what is happening. This is the issue. I'm trying to append Remote Party ID field to the SIP message header. I've been trying with both "append_rpid_hf()" and "append_hf()" and I can't see any Remote Party Header at the SIP messages sniffed with wireshark. Here is the configuration I've tried: #para cargar los Remote party ID de la tabla suscriber modparam("auth_db", "load_credentials", "$avp(s:rpid)=rpid") modparam("auth", "rpid_avp", "$avp(s:rpid)") modparam("auth", "rpid_prefix", "<sip:") modparam("auth", "rpid_suffix", ";user=phone>;party=calling;screen=yes;id-type=subscriber;privacy=off") #Modificacion para no pedir autenticacion si viene desde un trusted if (!allow_trusted("$si", "$(proto{s.toupper})")) { if (!proxy_authorize("umh.es", "subscriber")) { proxy_challenge("", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } append_rpid_hf("$fU", ";party=calling;id-type=subscriber;privacy=off;screen=yes"); consume_credentials(); ####### I also tested the following # append_hf("Remote-Party-ID: <sip:$avp(rpid)@$avp(domain);user=phone>;privacy=$avp(privacy);party=cal ling\r\n"); # append_hf("P-Asserted-Identity: <sip:$avp(rpid)@$avp(domain)>\r\n", "Call-ID"); # consume_credentials(); } } In a similar post I've read that the user had a problem because of the domain table. I have both the domain name and the IP of the host defined, and I also get response with "$avp(s:rpid) , when RPID field is defined to a subscriber. As I said I can't find the mistake, so any help would be appreciated. Thanks in advance and best regards, Ricardo Dominguez

2 1

Re: [SR-Users] LCR database issues
by Lee Archer 10 Nov '10

10 Nov '10

Anyone any idea why these are reporting command disabled? Regards Lee From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Lee Archer Sent: 08 November 2010 17:27 To: sr-users(a)lists.sip-router.org Subject: [SR-Users] LCR database issues Hi, I have kamailio configured to get it's LCR info from a mysql database but when I try to get this info from the command line I am told the command is disabled. Why is this? [root@kam-3-1-s1 kamailio]# kamctl lcr show_gws ERROR: command disabled [root@kam-3-1-s1 kamailio]# kamctl lcr dump_gws ERROR: command disabled [root@kam-3-1-s1 kamailio]# kamctl lcr show_routes ERROR: command disabled [root@kam-3-1-s1 kamailio]# kamctl lcr dump_routes ERROR: command disabled [root@kam-3-1-s1 kamailio]# kamctl lcr show_gws ERROR: command disabled lcr show_gws....... show database gateways lcr show_routes.... show database routes lcr dump_gws....... show in memory gateways lcr dump_routes.... show in memory routes lcr reload ........ reload lcr gateways and routes lcr eval_weights .. evaluates probability for given GW's weights [root@kam-3-1-s1 kamailio]# kamctl lcr reload ERROR: command disabled Regards Lee

2 4

kamctl duplication of output
by Lee Archer 10 Nov '10

10 Nov '10

Is there a problem with kamctl and duplication of the existing commands? [root@kam-3-1-s1 ~]# kamctl /usr/local/sbin/kamctl 3.1.0 Existing commands: -- command 'cisco_restart' - restart CISCO phone (NOTIFY) cisco_restart <uri> ................ restart phone configured for <uri> -- command 'online' - dump online users from memory online ............................. display online users -- command 'monitor' - show internal status monitor ............................ show server's internal status -- command 'ping' - ping a SIP URI (OPTIONS) ping <uri> ......................... ping <uri> with SIP OPTIONS -- command 'ul|alias' - manage user location or aliases ul show [<username>]................ show in-RAM online users ul show --brief..................... show in-RAM online users in short format ul rm <username> [<contact URI>].... delete user's usrloc entries ul add <username> <uri> ............ introduce a permanent usrloc entry ul add <username> <uri> <expires> .. introduce a temporary usrloc entry -- command 'cisco_restart' - restart CISCO phone (NOTIFY) cisco_restart <uri> ................ restart phone configured for <uri> -- command 'online' - dump online users from memory online ............................. display online users -- command 'monitor' - show internal status monitor ............................ show server's internal status -- command 'ping' - ping a SIP URI (OPTIONS) ping <uri> ......................... ping <uri> with SIP OPTIONS -- command 'ul|alias' - manage user location or aliases ul show [<username>]................ show in-RAM online users ul show --brief..................... show in-RAM online users in short format ul rm <username> [<contact URI>].... delete user's usrloc entries ul add <username> <uri> ............ introduce a permanent usrloc entry ul add <username> <uri> <expires> .. introduce a temporary usrloc entry Regards Lee

2 1

← Newer
1
...
5
6
7
8
9
10
11
12
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2010