sr-users May 2010

sr-users@lists.kamailio.org

67 participants
107 discussions

Kamailio 3.0.1 output debug to terminal
by Nelson Pereira 19 May '10

19 May '10

How do you output debug info to the terminal? I don't understand this : # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG How do I get debug and output to screen? Nelson Pereira

1 0

Re: [SR-Users] Acnnot get Kamailio to start ... GRRR
by Nelson Pereira 19 May '10

19 May '10

This is what Im getting at the end of the make deb, and it's not making the debian package...: Makefile.defs defs skipped make[3]: Entering directory `/usr/src/kamailio-3.0.1/modules/tls' mkdir -p /usr/src/kamailio-3.0.1/debian/kamailio-tls-modules/etc/kamailio MAIN_NAME=kamailio ./sip-router_cert.sh -d /usr/src/kamailio-3.0.1/debian/kamailio-tls-modules/etc/kamailio/ Could not find openssl command Set OPENSSL environment variable properly (see -h for more info) make[3]: *** [install-tls-cert] Error 1 make[3]: Leaving directory `/usr/src/kamailio-3.0.1/modules/tls' make[2]: *** [install-modules] Error 1 make[2]: Leaving directory `/usr/src/kamailio-3.0.1' make[1]: *** [install] Error 2 make[1]: Leaving directory `/usr/src/kamailio-3.0.1' dpkg-buildpackage: failure: fakeroot debian/rules binary gave error exit status 2 make: [deb] Error 2 (ignored) Nelson Pereira Senior Network Specialist Protus npereira(a)protus.com phone: 613.733.0000 ext.528 MyFax: 613.822.5083 MyFax.com | my1voice.com | Campaigner.com -----Original Message----- From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] Sent: Wednesday, May 19, 2010 4:20 AM To: Nelson Pereira Subject: Re: [SR-Users] Acnnot get Kamailio to start ... GRRR Am 18.05.2010 21:10, schrieb Nelson Pereira: > I tried make deb and was getting other errors... Could it be because im running 64bit? That shouldn't be the problem. Usually you just execute "make deb". The first time you will get an error message about missing dependencies. Install the missing dependencies (apt-get install ...) and then execute "make deb" again. regards klaus > > Nelson Pereira > Senior Network Specialist > > Protus > npereira(a)protus.com > phone: 613.733.0000 ext.528 > MyFax: 613.822.5083 > > MyFax.com | my1voice.com | Campaigner.com > > > -----Original Message----- > From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > Sent: Tuesday, May 18, 2010 2:56 PM > To: Nelson Pereira > Cc: sr-users(a)lists.sip-router.org > Subject: Re: [SR-Users] Acnnot get Kamailio to start ... GRRR > > Nelson Pereira wrote: >> Do I absolutely need Mysql DB for this to work? > > No. > > If you use "make deb", then the dependencies needs to be fulfilled for > generating the modules (e.g. mysql-client). But there is no need to > install the kamailio-mysql module. > > regards > klaus > >> I'm simply using this to do UDP to TCp conversion, nothing else. >> >> NP >> >> -----Original Message----- >> From: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Edson - Lists >> Sent: Tuesday, May 18, 2010 1:19 PM >> To: sr-users(a)lists.sip-router.org >> Subject: Re: [SR-Users] Acnnot get Kamailio to start ... GRRR >> >> It can be a stupid question, but did the directory exists? Has the user >> who runs Kamailio rights to it? >> >> BDW, which version of Kamailio are you testing? Why not the last SR? >> >> Edson. >> >> Em 18/05/2010 13:55, Nelson Pereira escreveu: >>> Basic install with source using the provided script: >>> >>> make_and_install install "standard" >>> >>> then try to do : >>> >>> /usr/local/sbin/kamctl start >>> >>> INFO: Starting Kamailio : >>> >>> ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start >>> failed >>> >>> root@qa-qsuitePBX-01:/usr/local/sbin# >>> >>> What am I doing wrong? >>> >>> *Nelson Pereira* >>> >>> >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >

1 2

Acnnot get Kamailio to start ... GRRR
by Nelson Pereira 19 May '10

19 May '10

Basic install with source using the provided script: make_and_install install "standard" then try to do : /usr/local/sbin/kamctl start INFO: Starting Kamailio : ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed root@qa-qsuitePBX-01:/usr/local/sbin# What am I doing wrong? Nelson Pereira

6 10

Kamailio 1.5 stops processing messages
by Santiago Gimeno 19 May '10

19 May '10

Hi, I'm working with Kamailio 1.5 (rev 5968) and from time to time kamailio freezes and stops processing messages. Kamailio is working only in UDP. I really don't know in which conditions this problem is happening: it happens both in high and low load. Here is a backtrace of one of the UDP working processes when kamailio is frozen (all the other UDP process backtraces look similar) : #0 0xb7fdf410 in ?? () #1 0xbfbfec28 in ?? () #2 0x00000001 in ?? () #3 0xa7392ad0 in ?? () #4 0xb7f3b4ac in sched_yield () from /lib/tls/i686/cmov/libc.so.6 #5 0xb7ba9463 in lock_hash (i=10361) at ../../mem/../fastlock.h:182 #6 0xb7bc4587 in t_lookup_request (p_msg=0x823fc70, leave_new_locked=1) at t_lookup.c:468 #7 0xb7bc54ae in t_newtran (p_msg=0x823fc70) at t_lookup.c:1124 #8 0xb7bb740c in t_relay_to (p_msg=0x823fc70, proxy=0x0, flags=1) at t_funcs.c:212 #9 0xb7bb8f6c in t_replicate (p_msg=0x823fc70, dst=0x817cdf8, flags=1) at t_fwd.c:763 #10 0xb7bc7fce in w_t_replicate (p_msg=0x823fc70, dst=0x817cdf8 "\230ê\030\b\016", flags=0x0) at tm.c:957 #11 0x0805301c in do_action (a=0x818eb20, msg=0x823fc70) at action.c:874 #12 0x080557aa in run_action_list (a=0x818eb20, msg=0x823fc70) at action.c:145 #13 0x08054491 in do_action (a=0x818ec78, msg=0x823fc70) at action.c:746 #14 0x080557aa in run_action_list (a=0x818c940, msg=0x823fc70) at action.c:145 #15 0x08053efb in do_action (a=0x81b38e0, msg=0x823fc70) at action.c:120 #16 0x080557aa in run_action_list (a=0x81b3878, msg=0x823fc70) at action.c:145 #17 0x08054491 in do_action (a=0x81b5f00, msg=0x823fc70) at action.c:746 #18 0x080557aa in run_action_list (a=0x81b5f00, msg=0x823fc70) at action.c:145 #19 0x08054f2d in do_action (a=0x81b5f68, msg=0x823fc70) at action.c:752 #20 0x080557aa in run_action_list (a=0x81b5f68, msg=0x823fc70) at action.c:145 #21 0x08054f2d in do_action (a=0x81b5fd0, msg=0x823fc70) at action.c:752 #22 0x080557aa in run_action_list (a=0x81aefd0, msg=0x823fc70) at action.c:145 #23 0x08053efb in do_action (a=0x818bc08, msg=0x823fc70) at action.c:120 #24 0x080557aa in run_action_list (a=0x8187910, msg=0x823fc70) at action.c:145 #25 0x08055b43 in run_top_route (a=0x8187910, msg=0x823fc70) at action.c:120 #26 0x0808c659 in receive_msg ( buf=0x8158040 "REGISTER sip:xxxxxxxxxxx.com SIP/2.0\r\nFrom: < sip:xxxxxx@xxxxxxxxxxxx.com <sip%3Axxxxxx(a)xxxxxxxxxxxx.com>>;tag=as516fcce2\r\nTo: <sip:xxxxxxx@xxxxxxxxxxxx.com <sip%3Axxxxxxx(a)xxxxxxxxxxxx.com>>\r\nCall-ID: 01e4ea8e185c85332ea68874543c810e(a)xxxxxxxxxxxxxx.com\r\nCSeq: 383 REGISTER\r\nVia: SIP"..., len=794, rcv_info=0xbfc004d4) at receive.c:175 #27 0x080c3ea3 in udp_rcv_loop () at udp_server.c:449 #28 0x0806e394 in main (argc=9, argv=0xbfc006b4) at main.c:774 Any idea of what might be happening? Best regards, Santi

3 10

Robust header compression (RFC 3095) with Kamailio + rtpproxy
by Vikram Ragukumar 18 May '10

18 May '10

Hello, We are looking into bandwidth conservation by implementing RTP/UDP/IP header compression. Has anybody implemented ROHC or another header compression scheme in combination with kamailio + rtpproxy ? Could you please point us to online documentation or other useful resources ? Thanks and Regards, Vikram.

4 3

Trying to find the built-in password for the database....
by SIP 18 May '10

18 May '10

So... I've been working on installing Kamailio 3.0.1 on a test server to begin migration from SER 0.9.6 (yes, I know it will be a bit of a migration). The INSTALL docs are... not perfect if working with the source (and not a package). Following the instructions did not get me mysql support. There were files that didn't install where they needed to be that I had to move over by hand -- none of which is mentioned in the docs. Even after removing the db_mysql from the list of excluded modules, it BUILT the module, but didn't install it. I also used a different DB name, username, and password from the default (to match more closely the environment we'll be migrating from). After tinkering, I got the DB scripts to run with the right username/pass, and have now edited the kamctlrc and kamailio.cfg to have the proper db name, username, pass, etc. However, when I try and start kamailio, it fails, and the log spits out a bunch of access denied messages using the original, default username/pass (openserro@localhost). My question is, where is that password located? What file have I missed? N.

2 2

Kamailio as a UAC
by Ricardo Martinez 18 May '10

18 May '10

Hello. Is possible use some module in kamailio to authenticate against a Asterisk Box for example?. What I need is to have a Sip Client Registered in Kamailio, but when this client is called I need to send the call to Asterisk which will ask for authentication (user/pass). Is possible to do this with kamailio?. If so, can someone give an example? Thanks in advance, Regards, Ricardo Martinez.-

2 4

Dispatcher send OPTION Interval
by François BERGANZ 18 May '10

18 May '10

Hello all, In dispatcher, I know how to send OPTIONS, modify the interval when a gateway is down... I can't see how to change the Ping option interval when a gateway is up. how can I do? If it is in the sources, I can't find it. thank you, regards, François BERGANZ Ingénieur/Chef de projets VoIP Acropolis Telecom

2 1

Question on install of Kamailio 3.0.1 from source on Ubuntu 8.04
by Nelson Pereira 18 May '10

18 May '10

I downlaoded the source of 3.0.1 and untar'ed. Then executed as per docs (INSTALL file): make prefix=/ make prefix=/ install Yet, when I start kamailio from /sbin/kamailio, I get this: root@qa-qsuitePBX-01:/usr/src# kamailio loading modules under //lib/kamailio/modules_k/://lib/kamailio/modules/ Listening on udp: 10.98.6.6 [10.98.6.6]:5060 udp: 10.98.6.6 [10.98.6.6]:5065 udp: 10.98.6.6 [10.98.6.6]:5066 udp: 10.98.6.6 [10.98.6.6]:5067 Aliases: It's loading modules from //lib....? What is this? And is kamailio installed correctly? Nelson Pereira Senior Network Specialist Protus<http://www.protus.com/> npereira(a)protus.com<mailto:name@protus.com> phone: 613.733.0000 ext.528 MyFax: 613.822.5083 MyFax.com<http://www.myfax.com/> | my1voice.com<http://www.my1voice.com/> | Campaigner.com<http://www.campaigner.com/>

2 2

installing Kamilio onto Ubuntu 8.04
by Nelson Pereira 18 May '10

18 May '10

Is there a apt-get package to install kamilio? If so, how do I do that? NP

2 3

← Newer
1
...
4
5
6
7
8
9
10
11
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2010