sr-users October 2012

sr-users@lists.kamailio.org

87 participants
164 discussions

by Andrew Mortensen

Can I safely strip 100rel support from INVITEs sent by callers registered to my proxy? We're using proxy-generated 302 redirects for call forwarding in our deployment. In general this works better for us than appending branches, as we rapidly ran into branch limits when dealing with large multiple appearance lines. However, we've run into a case where the caller, a Polycom 550, seems to get confused when a parallel forked call is redirected, 100rel is in use and the redirection target is also a multiple appearance line. The caller is correctly responding with PRACKs to all 180s, before and after the redirection. However, hanging up the call on the caller after the redirection, but before any remote party has answered, does *not* cause the caller to send a CANCEL to tear down the call. In fact, the caller doesn't send anything at all. The remote parties continue to ring until the ring timer expires, and the proxy sends CANCELs to all callee endpoints. That's clearly a Polycom bug, and we'll need to work with them to get it resolved. In the meantime, I'm looking for workarounds. One quick, crude option is to strip 100rel from the Supported header in the caller's INVITE. I've tested this, and it does solve the problem, but I'm concerned about side effects. I'm aware of the value 100rel has for calls to the PSTN, but in this case the calls never leave the local network. Are there situations where 100rel is critical for a parallel forked call? andrew

12 years, 1 month

rtpproxy_destroy([flags]) does not accept flags

by Juha Heinanen

according to rtpproxy module readme, rtpproxy_destroy function takes optional flags param: 5.4. rtpproxy_destroy([flags]) however, the code does not support it: {"unforce_rtp_proxy", (cmd_function)unforce_rtp_proxy_f, 0, 0, 0, ANY_ROUTE}, {"rtpproxy_destroy", (cmd_function)unforce_rtp_proxy_f, 0, 0, 0, ANY_ROUTE}, what has happened? -- juha

12 years, 1 month

MSILO Configuration

by Ed Brady

Hi, I am having trouble configuring MSILO. I copied the example config into my kamailio.cfg file and edited the areas that apply to my domain, but when restarting Kamailio I am faced with an error. Below is the error followed by my complete config file. Please advise what I am doing wrong. Is there some sort of resource for HowTos on Kamailio? The module documentation seems very thorough but the examples at the end seem to only be useful if that module is the only one you need to configure. I am trying to do a fairly straight forward configuration I think (SIP messaging with offline message storing and a single incoming/outgoing gateway that is used for all accounts that do not locally exist), but I am unable to find straight forward documentation on how to configure something like this. Please let me know what I am missing. Thanks, Ed Not starting Kamailio: invalid configuration file! > -e > 0(30863) INFO: tls [tls_init.c:377]: tls: init_tls: disabling > compression... > 0(30863) : <core> [cfg.y:3594]: parse error in config file > /etc/kamailio/kamailio.cfg, line 817, column 5: syntax error > 0(30863) : <core> [cfg.y:3594]: parse error in config file > /etc/kamailio/kamailio.cfg, line 817, column 5: bad command > 0(30863) : <core> [cfg.y:3594]: parse error in config file > /etc/kamailio/kamailio.cfg, line 817, column 5: bad command > 0(30863) : <core> [cfg.y:3594]: parse error in config file > /etc/kamailio/kamailio.cfg, line 878, column 12: syntax error > 0(30863) : <core> [cfg.y:3594]: parse error in config file > /etc/kamailio/kamailio.cfg, line 878, column 12: > ERROR: bad config file (5 errors) > *Config* #!KAMAILIO # # Kamailio (OpenSER) SIP Server v3.3 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users(a)lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: # - define WITH_MYSQL # # #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_TLS #!define WITH_NAT #!define WITH_ACCDB # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable speed dial lookup execute: # - enable mysql # - define WITH_SPEEDDIAL # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: # - define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To block 3XX redirect replies execute: # - define WITH_BLOCK3XX # # *** To enable VoiceMail routing execute: # - define WITH_VOICEMAIL # - set the value of voicemail.srv_ip # - adjust the value of voicemail.srv_port # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define DBURL "mysql://openser:R4U8oO8Er872sNHr@localhost/openser" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" #!endif #!ifdef WITH_VOICEMAIL # VoiceMail Routing on offline, busy or no answer # # - by default Voicemail server IP is empty to avoid misrouting voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif ####### Modules Section ######## # set paths to location of modules (to sources or installation folders) #!ifdef WITH_SRCPATH mpath="modules_k:modules" #!else mpath="/usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "cfgutils.so" loadmodule "msrp.so" loadmodule "htable.so" loadmodule "msilo.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # -- msilo params -- modparam("msilo","db_url",DBURL) modparam("msilo","from_address","sip:registrar@MYDOMAIN.com") modparam("msilo","contact_hdr","Contact: registrar(a)MYDOMAIN.com :5060;msilo=yes\r\n") modparam("msilo","content_type_hdr","Content-Type: text/plain\r\n") modparam("msilo","offline_message","*** User $rU is offline!") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # max value for expires of registrations modparam("registrar", "max_expires", 3600) # set it to 1 to enable GRUU modparam("registrar", "gruu_enabled", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speedial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # use caching modparam("domain", "db_mode", 1) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=1800;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) #!endif ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); route(RELAY); } route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|SUBSCRIBE")) { t_on_branch("MANAGE_BRANCH"); t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { t_on_failure("MANAGE_FAILURE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } if ( is_method("ACK") ) { # ACK is forwarded statelessy route(NATMANAGE); } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_SPEEDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") if(sd_lookup("speed_dial")) route(SIPOUT); #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) route(SIPOUT); #!endif $avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH #!ifdef WITH_IPAUTH if((!is_method("REGISTER")) && allow_source_address()) { # source IP allowed return; } #!endif if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!endif return; } # Caller NAT detection route route[NATDETECT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; rtpproxy_manage(); if (is_request()) { if (!has_totag()) { add_rr_param(";nat=yes"); } } if (is_reply()) { if(isbflagset(FLB_NATB)) { fix_nated_contact(); } } #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # Route to MSILO 10-18-12 route{ if ( !mf_process_maxfwd_header("10") ) { sl_send_reply("483","To Many Hops"); exit; }; if (uri==myself) { { # for testing purposes, simply okay all REGISTERs if (method=="REGISTER") { save("location"); log("REGISTER received -> dumping messages with MSILO\n"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; # domestic SIP destinations are handled using our USRLOC DB if(!lookup("location")) { if (! t_newtran()) { sl_reply_error(); exit; }; # we do not care about anything else but MESSAGEs if (!method=="MESSAGE") { if (!t_reply("404", "Not found")) { sl_reply_error(); }; exit; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("$ru")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; exit; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); exit; }; # forward anything else t_relay(); } failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { exit; }; log(1,"MSILO:the downstream UA doesn't support MESSAGEs\n"); # we have changed the R-URI with the contact address, ignore it now if (m_store("$ou")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # route to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE")) return; # check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n"); return; } if($avp(oexten)==$null) return; $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); route(RELAY); exit; #!endif return; } # manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); } # manage incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") route(NATMANAGE); } # manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) { exit; } #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { route(TOVOICEMAIL); exit; } #!endif } event_route[msrp:frame-in] { xdbg("============#[[$msrp(method)]]===========\n"); xdbg("============*[[$si:$sp]]\n"); xdbg("============ crthop: [$msrp(crthop)]\n"); xdbg("============ prevhop: [$msrp(prevhop)]\n"); xdbg("============ nexthop: [$msrp(nexthop)]\n"); xdbg("============ firsthop: [$msrp(firsthop)]\n"); xdbg("============ lasthop: [$msrp(lasthop)]\n"); xdbg("============ prevhops: [$msrp(prevhops)]\n"); xdbg("============ nexthops: [$msrp(nexthops)]\n"); xdbg("============ srcaddr: [$msrp(srcaddr)]\n"); xdbg("============ srcsock: [$msrp(srcsock)]\n"); xdbg("============ sessid: [$msrp(sessid)]\n"); msrp_reply_flags("1"); if(msrp_is_reply()) { msrp_relay(); exit; } # handle AUTH MSRP requests if($msrp(method)=="AUTH") { if($msrp(nexthops)>0) { msrp_relay(); exit; } # frame for local server - send Use-Path # -- passwd can be loaded from DB based on $au $var(passwd) = "xyz123"; if(!pv_www_authenticate("myrealm", "$var(passwd)", "0")) { if(auth_get_www_authenticate("myrealm", "0", "$var(wauth)")) { msrp_reply("401", "Authorization Required", "$var(wauth)"); } else { msrp_reply("500", "Server Error"); } exit; } $var(cnt) = $var(cnt) + 1; pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)"); $sht(msrp=>$var(sessid)::srcaddr) = $msrp(srcaddr); $sht(msrp=>$var(sessid)::srcsock) = $msrp(srcsock); # - Use-Path: the MSRP address for server + session id $var(UsePath) = "Use-Path: msrp://127.0.0.1:5060/" + $var(sessid) + ";tcp\r\n"; msrp_reply("200", "OK", "$var(UsePath)"); exit; } if($msrp(method)=="SEND") { if($msrp(nexthops)>1) { msrp_reply("200", "Received"); msrp_relay(); exit; } $var(sessid) = $msrp(sessid); if($sht(msrp=>$var(sessid)::srcaddr) == $null) { # one more hop, but we don't have address in htable msrp_reply("481", "No Such Session"); exit; } msrp_relay_flags("1"); msrp_set_dst("$sht(msrp=>$var(sessid)::srcaddr)", "$sht(msrp=>$var(sessid)::srcsock)"); msrp_relay(); exit; } msrp_relay(); }

12 years, 1 month

Re: [SR-Users] Kamailio v3.3.2 Released

by Paul Cupis

On 16/10/12 22:29, Jon Bonilla (Manwe) wrote: > El Tue, 16 Oct 2012 17:00:03 +0200 > Daniel-Constantin Mierla<miconda(a)gmail.com> escribió: >> >> Kamailio SIP Server v3.3.2 stable release is out. > > Debian and Ubuntu packages are ready. Please find the instructions > below: > > http://www.kamailio.org/dokuwiki/doku.php/packages:debs I'm seeing a problem with the 3.3.2 packages on Debian at the moment. There is a file conflict between the kamailio package and kamailio-mysql-modules preventing the latter from installing. $ dpkg-deb -c /var/cache/apt/archives/kamailio_3.3.2+squeeze1_amd64.deb | grep srdb -rw-r--r-- root/root 74296 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so.1.0 -rw-r--r-- root/root 28360 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so.1 -> libsrdb1.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so -> libsrdb1.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so.1 -> libsrdb2.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so -> libsrdb2.so.1.0 $ dpkg-deb -c /var/cache/apt/archives/kamailio-mysql-modules_3.3.2+squeeze1_amd64.deb | grep srdb -rw-r--r-- root/root 28360 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so.1.0 -rw-r--r-- root/root 74296 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so.1 -> libsrdb2.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb2.so -> libsrdb2.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so.1 -> libsrdb1.so.1.0 lrwxrwxrwx root/root 0 2012-10-16 21:04 ./usr/lib64/kamailio/libsrdb1.so -> libsrdb1.so.1.0 Regards,

12 years, 1 month

Kamailio- Redirect message 300 with LCR reroute

by Fatima Chahrour~Vanrise Support

Dear List, I'd like to get help regarding my case. I have the following script where many thanks to Daniel has helped me in if (is_method("INVITE")) { if (!load_gws(1, $rU, $fu)) { sl_send_reply("502", "Unable To lOad GatEwAyS"); exit;} if(!next_gw()){ sl_send_reply("503", "Unable To fInD a gateWaY"); exit;} while(next_gw()){ km_append_branch(); } sl_send_reply("302","Moved Temporary"); exit; } The problem am facing is that the call is rerouting from the first gateway to the next gateway successfully when I have two gateways. BUT when I have three gateways, and the first two gateways are off, the call is not rerouted to the third gateway. It keeps hitting the seconds gateway and gives request time out at the end Why is that? Thanks in advance, F Chahrour

12 years, 1 month

Kamailio v3.3.2 RPM Packages

by Daniel-Constantin Mierla

Hello, for the record, RPM packages of Kamailio v3.3.2 were built for Centos 5.5, Centos 6, RedHat 5, RedHat 6, Fedora 15, Fedora 16, Fedora 17, OpenSuse 11.4 and OpenSuse 12.1, on i586 and x86_64 architectures. They are available on opensuse build service repos, see the links at: * http://www.kamailio.org/wiki/packages/rpms Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu

12 years, 1 month

Question about compliance with RCS/OMA Simple Presence

by Sangeeta Shah

Hello All, I need some guidance on whether the Kamailio presence/presence_xml and integrated xcap module implementations are RCS/OMA Simple presence compliant. Based on a few things I've seen in the code I don't see any handling for the oma presence rule xml extensions. Is there any plan to be RCS/OMA compliant in the new future? I can get SIMPLE PRESENCE with XCAP to work but not with OMA presence rules and resource lists. Thanks, Sangeeta -- Sangeeta Shah

12 years, 1 month

has_sdp()??

by Juha Heinanen

while reading rtpproxy module readme, i found this kind of example: if (is_method("INVITE")) { if (has_sdp()) { if (rtpproxy_offer()) t_on_reply("1"); } else { t_on_reply("2"); } } if (is_method("ACK") && has_sdp()) rtpproxy_answer(); does has_sdp() function really exist? it is not listed on wiki page: http://www.kamailhttp://www.kamailio.org/wiki/alphaindexes/3.4.x/modfunctio… -- juha

12 years, 1 month

make option to clean the installed binaries

by Ajay Sabat

Hi, I am a newbie here and recently started using kamailio/ser. I am wondering is there a makefile option to cleanup the installed binaries and library files. Thanks, Ajay

12 years, 1 month

how to search previous messages in the forum

by Ajay Sabat

Hi, Many times I get doubts and questions about Kamailio that I want to search in the SR-Users forum before posting a new message, as it might have already been answered in the past. Is there a easier way to do that than looking up the subject lines in the monthly archive? Thanks, Ajay

12 years, 1 month

← Newer
1
...
5
6
7
8
9
10
11
...
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2012