sr-users March 2012

sr-users@lists.kamailio.org

87 participants
162 discussions

Backing up htable to SQL table ...
by Krishna Kurapati 09 Mar '12

09 Mar '12

Hi, This is my first time attempt using htable module. How can I back up the htable content in the database incase the server restarts. I saw a htable in the MySQL database. My observation has been that htable module is not automatically backing up to database even though I added modparams to point to the database. Do I need to explicitly backup htable content to database using sqlops or some other mechanism? Thanks Krish Kura

3 6

Advice on placement of t_replicate (REGISTER)
by Asgaroth 09 Mar '12

09 Mar '12

Hi Guru's, I'd just like some advice on t_replace and its placement in the routing script. A lot of examples show the following setup: save("location"); t_replicate("backup_server"); Would it not be wiser to have something like: if (save("location")) { t_replcate("backup_server"); } Would there be any scenario where you would want to t_replicate if save("location") fails for some reason? The configuration I refer to is if the location database is in memory. I suspect you may want to replicate all if location is going to db core in case of external failure. But would it matter on the placement if the location was in memory? Thanks

2 1

kamailio with flowroute
by romon.zaman 09 Mar '12

09 Mar '12

hello room, i was trying to add sip provider(like. flowroute,vitelity) with user-pass authentication in kamailio to accept inbound calls. any help? thanks

3 2

no hangup when there is no network or when the UAC on the other side is power off
by Rabary 08 Mar '12

08 Mar '12

Hi everybody, We are using kamailio+callcontrol+cdrtool+freeradius+mysql to build a voip prepaid based system: . 2 SIP accounts created and one of them is prepaid . we can debit balance when we call with the SIP prepaid account, and when the balance is 0, the call hang up . if we hangup a call session from the prepaid SIP and the balance is not still 0, the call hangup and the system debit the appropriate cost . but when we call from the prepaid SIP account, and we disconnect the ethernet cable or the alimentation of the other UAC, the call don't hangup until the balance is set to 0 . if the phone is still ringing too, when we disconnect the other UAC, the caller UAC still ringing . the 2 uacs and kamailio are in the same subnet network the question is, how can we tell to kamailio to detect if the other side is down and then send bye immediately so thecalculating of the credit will be correct? Thank you. --

1 0

Rewrite $tU
by Lucas Alvarez 08 Mar '12

08 Mar '12

I want rewrite $tU but I'm not being able, I'm doing the following: remove_hf("To"); insert_hf("To: sip:$rU@$rd\r\n", "From");

4 8

Limiting registrations to known users without auth
by Pedro Antonio Vico Solano 08 Mar '12

08 Mar '12

3 4

default IP to forward TCP request
by Laurent Schweizer 07 Mar '12

07 Mar '12

Hello all, I have a linux server with different IP. eth0 -> 10.2.2.4 eth0:1 -> 10.2.2.5 I have kamailio listening on IP: listen=udp:10.2.2.5:5060 listen=tcp:10.2.2.5:5060 and in the script I do : rewritehostport("10.2.2.10:5060;transport=tcp"); if (!t_relay()) { sl_reply_error(); } exit; the problem is that t_relay is not using the IP 10.2.2.5 to forward this SIP request but the eth0 IP ( 10.2.2.4) I see that they is a function force_send_socket , I need to use this function to set the correct IP used to forward the request ? As I'm using only one IP 10.2.2.5 for openser, why he cannot always use this ip as default Ip ? Best regards Laurent

3 2

Re: [SR-Users] sr-users Digest, Vol 82, Issue 21
by Javier Gallart 07 Mar '12

07 Mar '12

Hello this is what I normally use: if (defined $var(x)) {...} Regards Javi > ------------------------------ > > Message: 4 > Date: Tue, 6 Mar 2012 20:05:32 -0600 > From: Krishna Kurapati <kkurapat(a)gmail.com> > Subject: [SR-Users] Improving Kamailo configuration parser ... > To: kamailio users <sr-users(a)lists.sip-router.org> > Message-ID: > <CAOzCjAfcaRQ+HT3r+mwckPyaVJH+EVFWNa_Hj6tAhGyD2DaMJA(a)mail.gmail.com > > > Content-Type: text/plain; charset="iso-8859-1" > > I used > > if ($var(x) != null) { ... } > > in one of the routes, and tried to run Kamailio server. > The server exited with an error. I did not know why. > > Once I changed it to if ($var(x) != $null) {} the error went away. > I missed $ infront null. I think it is hard to trace such problems once a > large chunk > of logic is written since many of us come from C++ and scripting background > where $null > is not a common practice. > > Also if I tried to use if (!$var(x)) { ... } Kamailio tries to convert the > value of $var(x) to integer. > prints WARNINGS in the log when the $var(x) consists of a string. > > Krish Kura >

1 0

Improving Kamailo configuration parser ...
by Krishna Kurapati 07 Mar '12

07 Mar '12

I used if ($var(x) != null) { ... } in one of the routes, and tried to run Kamailio server. The server exited with an error. I did not know why. Once I changed it to if ($var(x) != $null) {} the error went away. I missed $ infront null. I think it is hard to trace such problems once a large chunk of logic is written since many of us come from C++ and scripting background where $null is not a common practice. Also if I tried to use if (!$var(x)) { ... } Kamailio tries to convert the value of $var(x) to integer. prints WARNINGS in the log when the $var(x) consists of a string. Krish Kura

2 1

msilo is failing to in db connection...
by Krishna Kurapati 06 Mar '12

06 Mar '12

Hi all, I am trying to use msilo module from modules_k. Unfortunately it if failing during DB initialization. Other modules are initializing fine. I am using Kamailio 3.2.2. Not sure why the connection is not found. I tried to increase the MAX mysql connections to 250. I see the same error after I increase the connections. The config file is pretty standard: loadmodule "msilo.so" modparam("msilo", "add_date", 0); modparam("msilo", "db_url", DBURL); # The DBURL works for other modules... Here is the Log output: 0(14115) DEBUG: <core> [cfg.y:1684]: loading module msilo.so 0(14115) DEBUG: <core> [sr_module.c:557]: load_module: trying to load </usr/local/kamailio-3.2.2/lib64/kamailio/modules_k/msilo.so> ..... 0(14117) DEBUG: <core> [sr_module.c:928]: DEBUG: init_mod: msilo 0(14117) DEBUG: <core> [sr_module.c:667]: find_export_record: found <db_bind_api> in module db_mysql [/usr/local/kamailio-3.2.2/lib64/kamailio/modules/db_mysql.so] 0(14117) DEBUG: <core> [db.c:212]: using db bind api for db_mysql 0(14117) DEBUG: <core> [db.c:299]: connection 0x7fc20d1ace60 not found in pool 0(14117) DEBUG: db_mysql [km_my_con.c:94]: opening connection: mysql://xxxx:xxxx@localhost/openser 0(14117) ERROR: db_mysql [km_my_con.c:109]: driver error: Access denied for user 'openser'@'localhost' (using password: YES) 0(14117) ERROR: <core> [db.c:303]: could not add connection to the pool 0(14117) ERROR: msilo [msilo.c:319]: failed to connect to the database 0(14117) ERROR: <core> [sr_module.c:932]: init_mod(): Error while initializing module msilo (/usr/local/kamailio-3.2.2/lib64/kamailio/modules_k/msilo.so) ERROR: error while initializing modules Any help? Thanks

3 6

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2012