Hi,
I have two SIP servers, *A* and *B*, connected each other though a OPENVPN
tunnel. The server *B* needs to t_relay() every SIP message containing the
method MESSAGE to the server *A* but these messages never reach destination.
I have tested the tunnel connectivity and works fine. I wrote a Perl script
(located in *B*) that sends SIP MESSAGES to Kamailio (located in *A*) trying
to figure out what is happening but these messages are received by *A* and
processed correctly but when *B* does the same from Kamailio, it is never
received.
Here is the route part of kamailio.cfg in *B*:
Observation: ($rU == "1004") result is *true*
*
if(is_method("MESSAGE"))
{
if($rU == "1004")
{
xlog("L_INFO","En 1004");
rewritehost("10.8.0.1");
if (!t_relay())
xlog("L_INFO","MIO Error en t_relay");
t_reply("200", "Ok");
xlog("L_INFO","MIO despues rewrite");
exit;
}
.....*
The perl script that WORKS:
*$msg = 'MESSAGE sip:1004@192.168.1.2:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.2
From: "2002" <sip:2002@192.168.1.2 <sip%3A2002(a)192.168.1.2>>;tag=1837944796
To: <sip:1004@192.168.1.2 <sip%3A1004(a)192.168.1.2>>
Call-ID: 19722852989(a)192.168.1.2
CSeq: 15773 MESSAGE
Contact: <sip:2002@**PublicIP-protected**:5060>
Max-Forwards: 29
User-Agent: DBL
Content-Type: text/plain
Content-Length: 34
+595981[protected]
hello from kamailio
';
use IO::Socket;
my $sock = IO::Socket::INET->new( Proto=>'udp',
PeerHost=>'192.168.2.102',
PeerPort=>'5060');
print "Sending msg $msg\n";
$sock->send($msg) or die "error sending $!\n";
*Please help!
Thanks in advance.
Carlos.
Hi, I have Kamailio as SIP server and RTP server. Client is PJSIP.
I read that STUN is for non-symmetric NAT, and RTP server is for symmetric
NAT.
Supposed A calls B.
If A, B both use symmetric NAT and STUN, they cannot hear each other
If A or B use non-symmetric NAT and NOT using STUN, they cannot hear each
other.
Why is that?
I read http://tools.ietf.org/id/draft-takeda-symmetric-nat-traversal-00.txt
for Prediction Failure, is that related to this problem ?
--
Khoa Pham
HCMC University of Science
Faculty of Information Technology
I'm involved in setting up a Kamailio instance and was hoping to make use of the auth_ephemeral module for authentication. But the module documentation doesn't quite make clear how exactly the module is to be employed or the web service set up. Does anyone have a working example?
Regards,
Hemanshu Vadehra
hemanshu.v(a)directi.com
Im trying to enable Kamailio TLS but the configuration is not running at
all when I cahnge it liike this as follow.
Kamailio 3.3 ubuntu 12.04 LTS
#!define WITH_TLS
#!ifdef WITH_TLS
enable_tls=yes
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
#!endif
Please help
--
Kethzer Docteur
Hi,
I would like to append a header to a 'winning' negative reply in
failure_route and let the Kamailio do the default action (state fully
forward the winning reply).
When I use append_to_reply("Foo: bar\r\n"); and then call exit; in
failure_route nothing is appended.
When I use same append_to_reply then t_relay("505","Error"); and exit; the
header is appended.
When I use append and t_reply with dialog modul turned on I got a bug I'm
solving here '[SR-Users] t_reply in failure route with dialog module'.
So my question is how to put a header into a reply when I don't want to
alter its code or text?
I'm using Kamilio 4.0.4 on Debian 7.1
Thanks for an answer
Efelin
Hi All,
I have build Kamailio 4.0.1 from source in CentOS 5.8(i386
architecture).I followed all instructions from
http://www.kamailio.org/wiki/install/4.0.x/git.(Though Modules_k directory
is not generated).I then edit kamailio.config file for websocket support as
described in webocket.cfg file in exmples directory.But while starting
kamailio it gives following error
ERROR: load_module: could not open module : libunistring.so.0: cannot
open shared object file: No such file or directory
0(30270) : [cfg.y:3567]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 318, column 12-57: failed to
load module
I checked websocket.so file in the specified directory and it is
already there.Can you please help me what's wrong with it?
please help.
Rupayan Dutta
Hello,
First, i have 7 years experience with Asterisk, but I started a project
with Kamailio, forgive me in advance if I say silly things...! ;-)
I set up a classic Asterisk / Kamailio configuration:
sip phones -> kamailio -> asterisk -> sip trunks/pstn.
When a call comes from the PSTN side, if I configure Asterisk as follows:
[012345678]
type = friend
username = 012345678
secret = xxxxxxx
host = dynamic
fromdomain = sip.mydomain.com
fromuser = 012345678
Standard mode:
exten => 012345678, 1, Dial(SIP/012345678) -> The call is redirected on the
phone by Kamailio ! :-)
------------------------------------------------------------------------------------------------------------------------------------------------
Trunk mode:
[mytrunk]
type = friend
username = mytrunkUser
secret = xxxxxxx
host = dynamic
fromdomain = sip.mydomain.com
fromuser = mytrunkUser
exten => 012345678, 1, Dial(SIP/mytrunk/012345678) -> The call is rejected
by Kamailio....
exten => 012345679, 1, Dial(SIP/mytrunk/012345679) -> The call is rejected
by Kamailio ....
My question is how to allow the routing of multiple numbers (trunk mode) in
a SIP account with Kamailio?
Best regards,
Mickael
Hello all,
Just wondering if anyone know any tutorial on setting up HA+DRBD solution for kamailio.
Especially creating partitions, DRBD devices and mount points.
Thanks in advance,
-Sid
"May the light be with you." ______________________________________________
Siddhardha Garige
www.luminepixels.com
Hi,
I'm using 'allow_trusted()' from Permissions module without a problem in a
Kamailio 4.0 routing logic. It does just work, but the MI command
'trusted_dump' tells me that the module is not in use:
'''
server:/home/jmillan# kamctl fifo trusted_dump
500 Trusted-module not in use
'''
Doing a 'trusted_reload' does neither make any query to database to
retrieve the data.
Other MI commands of same module do work correctly. ie: 'address_reload' or
'address_dump'
Note: I have tested in a Kamailio 1.5 and the result is the same.
Regards.
--
José Luis Millán
Hi all..
I have solve the problem .
Cheers,
vivi
From: vivi [mailto:vivi.hilton@gmail.com]
Sent: Saturday, June 06, 2009 11:29 PM
To: 'users(a)lists.kamailio.org'
Subject: /usr/local/sbin/kamdbctl create error
Hi all
I have specify the wanted db type (DBENGINE=MYSQL) in the
/usr/local/etc/kamailio/kamctlrc
then I using "/usr/local/sbin/kamdbctl create" to create MySQL database,
but I got this error:
ERROR: database engine not specified, please setup one in the config script
root@acer:/usr/local/src/kamailio-1.5.0/sip-server# vim
/usr/local/etc/kamailio/kamctlrc
root@acer:/usr/local/src/kamailio-1.5.0/sip-server# /usr/local/sbin/kamdbctl
create
MySQL password for root:
INFO: test server charset
ERROR 2002 (HY000): Can't connect to local MySQL server through socket
'/var/run/mysqld/mysqld.sock' (2)
ERROR 2002 (HY000): Can't connect to local MySQL server through socket
'/var/run/mysqld/mysqld.sock' (2)
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
/usr/local/lib/kamailio/kamctl/kamdbctl.mysql: line 112: [: =: unary
operator expected
INFO: creating database openser ...
ERROR 2002 (HY000): Can't connect to local MySQL server through socket
'/var/run/mysqld/mysqld.sock' (2)
ERROR: Creating core database and grant privileges failed!
Cheers,
vivi
