sr-users May 2013

sr-users@lists.kamailio.org

95 participants
157 discussions

SIP notify to UAC, triggered from DB or web
by Attila Megyeri 13 May '13

13 May '13

Hello, I would like to send a SIP NOTIFY message to my SIP client(s), initiated by an event on the server side. //OFF Asterisk has a similar functionality, for instance ("sip notify <phone vendor>-reboot"), to request a reboot of the phone device from the server side. There is no need for an associated SUBSCRIBE request in such a case. ON// Our requirement is, that if a specific event happens on the server side, I want to send an event to the client. My first idea is to use SIP NOTIFY, but perhaps a SIP MESSAGE could do the job as well. The client is registered over TLS, if necessary it could even subscribe for the event. What would you recommend, using the websockets? Or creating a module from the scratch? Thank you in advance, Attila

2 2

(no subject)
by 李启明 13 May '13

13 May '13

hi, i am from china.i have install a kamailio server with wss support ,and i set 4443 as the port(set 8080 as the ws port);the result of "netstat -tnl" is: "Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 my_ip:4443 0.0.0.0:* LISTEN tcp 0 0 my_ip:5060 0.0.0.0:* LISTEN tcp 0 0 my_ip:5061 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp 0 0 my_ip:8080 0.0.0.0:* LISTEN" but,when i use ws,it's ok;when i use wss,it come up a 106 error!why?

2 3

i386 vs. amd64
by Juha Heinanen 11 May '13

11 May '13

debian wheezy multiarch support allows installation of i386 packages to amd64 host provided that there is i386 version of libraries used by the package. is there any advantage of amd64 kamailio versus i386 one? how does kamailio benefit from 64 bit architecture or does it not? if not, the on wheezy amd64 packages would not be needed. this is what e.g. google has done with chrome browser packages. i have noticed that amd64 version of kamailio requires quite a lot more memory than i386 version, which it not necessarily a good thing. -- juha

3 2

Is RTP proxy compatilble with SER
by Priyaranjan Nayak 11 May '13

11 May '13

Hi All, I am new to SER and SEMS . Can we run RTP proxy with SER ? If yes, which version of SER will compatible with RTP proxy ? -- Thanks Priyaranjan

2 1

Presence and watcher_domain
by andpe 10 May '13

10 May '13

Hi I use PRESENCE, PRESENCE_REGINFO and others, with Cisco phones (trying to run :-)). The phones are seen as being registered in the PRESENCE, REGINFO work unless properly. But I have a question: in the table active_watchers watcher_domain field is the IP address of the phone and not the domain address. Is this normal? Applies only to telephones using REGINFO. eg Jitsi has a valid entry. Andy

3 2

Is RTP proxy compatible with SER
by Priyaranjan Nayak 10 May '13

10 May '13

Hi All, I am new to SER and SEMS . Can we run RTP proxy with SER ? If yes, which version of SER will compatible with RTP proxy ? -- Thanks Priyaranjan

2 1

Cleaning registrations and presentity table after restart
by אורן אברהם 10 May '13

10 May '13

Dear list I want to remove all raws from the presentity table after restart of kamailio. how can i achieve this ? (preferably without deleting the table manualy)

2 1

Serial forking
by Vitaliy Aleksandrov 10 May '13

10 May '13

Hello. As I understand t_load_contacts() / t_next_contacts() can help only in case when branches have different "q" values. The only way I see is to get all contacts via reg_fetch_contacts(), save the list to an AVP and then iterate through the list in the way described in tm module docs. Does anybody know a better way of how serial forking can be implemented if all contacts have equal "q" values ?

2 2

I need you help-----about Kamailio 3.3.x and Asterisk 10.7.0 Realtime Integration
by zhengyw 10 May '13

10 May '13

Hello: I followed the step by step guide (http://kb.asipto.com/asterisk:realtime:kamailio-3.3.x-asterisk-10.7.0-astdb) that describe the realtime integration between Kamailio and Asterisk. I have no problem with registration but when I try a call from 101 to 102 I get the followng error : 1. in the asterisk console: " Unresolvable destination (478/SL)" 2. in the kamailio log: May 6 17:01:38 WH-PC /usr/sbin/kamailio[4192]: ERROR: <core> [resolve.c:1540]: ERROR: sip_hostport2su: could not resolve hostname: "(null)" May 6 17:01:38 WH-PC /usr/sbin/kamailio[4192]: ERROR: tm [ut.h:327]: failed to resolve "(null)" May 6 17:01:38 WH-PC /usr/sbin/kamailio[4192]: ERROR: tm [t_fwd.c:1530]: ERROR: t_forward_nonack: failure to add branches May 6 17:01:38 WH-PC /usr/sbin/kamailio[4192]: ERROR: sl [sl_funcs.c:371]: ERROR: sl_reply_error used: Unresolvable destination (478/SL) Any idea about the cause of this problem? ps:kamailio and asterisk are running in the same machine. Best Regards, zhengyw 郑友闻医疗终端部东软熙康健康有限公司沈阳市浑南新区新秀街2号，A1楼216 Postcode：110179 Tel：+86 24 83662278 Mobile：15242493836 Email : zhengyw(a)neusoft.com http://www.neusoft.com --------------------------------------------------------------------------------------------------- Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful.If you have received this communication in error,please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you. ---------------------------------------------------------------------------------------------------

2 1

How to configure Kamailio to use different source port for different call
by Kamal Palei 10 May '13

10 May '13

Dear All I have a Kamalio proxy, and number of phones are connected to it. When all the phones make call, Kamailio forwards00 request to main proxy from same source port. Is there any configuration option in Kamailio.cfg for changing source port for each call. Basically one dedicated connection per session. Kindly let me know if it is there. Thanks Kamal

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users May 2013