sr-users August 2013

sr-users@lists.kamailio.org

93 participants
176 discussions

by Lucky Santiago

I have kamailio 4.0.2 installed on Ubuntu 12.04.1 and I already have user/subscriber registered and PSTN routing already working fine (outgoing call) i just need to add config on kamailio.cfg (modparam, ifdefs, routing logic, etc) to make this carrierroute module work based on the db entries i created, if someone can provide sample config entries that needs to add it would be great, since i believe this is not included on the default installation of kamailio. Sorry for disturbing you. kamctl cr show cr carrier names +----+------------+ | id | carrier | +----+------------+ | 1 | 61.8.XX.XX | +----+------------+ cr domain names +----+------------+ | id | domain | +----+------------+ | 1 | 61.8.XX.XX | +----+------------+ cr routes +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+------------------+ | id | carrier | domain | scan_prefix | flags | mask | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix | description | +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+------------------+ | 1 | 1 | 1 | 03 | 0 | 0 | 1 | 0 | 61.8.XX.XX | 0 | 0 | CR to voip gw | +----+---------+--------+-------------+-------+------+------+-------+--------------+----------------+----------------+------------------+ My current kamailio.cfg was based on this, http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=etc/kama… with just few modification for PSTN route usage (IP addr of PSTN and allowed prefix) Thanks in Advance, -- Lucky Santiago M: +63.932.88.LUCKY (58259) Skype: luckysantiago

11 years, 1 month

Finding Destination IP:Port for 200 OK

by SamyGo

Dear list, Its just a little thing to ask but I somehow can't seem to figure out which psuedo variable to use to find out where a particular 200 OK is destined to go. the scenario is I've multiple media servers in dispatcher and calls are distributed. I need to capture a 200OK that is destined to go to a particular ip! I've tried using the dst_ip, $dd, $du but none of them are giving any results for the 200 OK. I just need to know where do kamailio is going to send this 200 since it is already a part of an on-going INVITE/call. Thanks, Sammy

11 years, 1 month

Websockets problem in Kamailio

by Ruben Antunes

Hello, I've tried to configure *Websockets *server in *Kamailio *(i've installed kamailio with these steps: http://www.kamailio.org/wiki/install/4.0.x/git), but I think that is *not working*, because when trying to connect to the *Websockets* server in *JsSip * http://tryit.jssip.net/ says: <http://gyazo.com/f37d9f42caf1915223611f6f1ad18b84.png> That's the *Websockets server*: ws://184.75.243.217:10080 * * * * The *configuration file* that I use is that: https://gist.github.com/jesusprubio/4066845 I've changed the basic things.. directory of the modules, port of the wss:// and the mysql user and password. That's a printscreen of the *Kamailio* server running: (there are more that just 1 IP because my server have 4 IP address because of ICE Server. The* Kamailio is running* pretty well over programs like *Jitsi*, but not in the browser because of Websockets, that's why I want to run a Websockets Server. <http://gyazo.com/ea6635a8162513c150e35fe2f8e0e381.png>

11 years, 1 month

Change "from user "

by arun Jayaprakash

Hello, can someone let me know how I can modify the "from user" when making an outbound PSTN call. For example, when I make a PSTN call now the caller ID shows up as my 4 digit extension but I would like my PSTN number displayed instead. Thank you. Arun

11 years, 1 month

UAC module fails to refresh registrations

by neumann

First register is OK, but after 60 seconds time to update register, kamailio after 401 Unauthorized dont send second register with Authorization. In log i see only ERROR: uac [uac_reg.c:537]: uac_reg_tm_callback(): authentication failed for <kamailio> mysql> select * from uacreg; +----+----------+------------+----------------+------------+----------------+----------+---------------+---------------+--------------------+---------+ | id | l_uuid | l_username | l_domain | r_username | r_domain | realm | auth_username | auth_password | auth_proxy | expires | +----+----------+------------+----------------+------------+----------------+----------+---------------+---------------+--------------------+---------+ | 1 | kamailio | aster | 192.168.16.201 | kamailio | 192.168.16.200 | asterisk | kamailio | 1234 | sip:192.168.16.200 | 60 | +----+----------+------------+----------------+------------+----------------+----------+---------------+---------------+--------------------+---------+ 1 row in set (0.00 sec) #!KAMAILIO # # Kamailio (OpenSER) SIP Server v4.0 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users(a)lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/wiki/ # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: #-!define WITH_DEBUG # # *** To enable mysql: #!define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql #!define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication #!define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql #!define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable speed dial lookup execute: # - enable mysql # - define WITH_SPEEDDIAL # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: #!define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To block 3XX redirect replies execute: # - define WITH_BLOCK3XX # # *** To enable VoiceMail routing execute: # - define WITH_VOICEMAIL # - set the value of voicemail.srv_ip # - adjust the value of voicemail.srv_port # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Include Local Config If Exists ######### import_file "kamailio-local.cfg" ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!ifndef DBURL #!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ #alias="sip.mydomain.com" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" pstn.gw_port = "" desc "PSTN GW Port" #!endif #!ifdef WITH_VOICEMAIL # VoiceMail Routing on offline, busy or no answer # # - by default Voicemail server IP is empty to avoid misrouting voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif ####### Modules Section ######## # set paths to location of modules (to sources or installation folders) #!ifdef WITH_SRCPATH mpath="modules_k:modules" #!else mpath="/usr/local/lib/kamailio/modules_k/:/usr/lib64/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "mi_rpc.so" loadmodule "acc.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif loadmodule "uac.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # max value for expires of registrations modparam("registrar", "max_expires", 3600) # set it to 1 to enable GRUU modparam("registrar", "gruu_enabled", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) #!endif modparam("uac", "reg_db_url", "mysql://kamailio:kamailiorw@localhost/kamailio") modparam("uac", "reg_timer_interval", 60) modparam("uac", "reg_db_table", "uacreg") modparam("uac", "reg_contact_addr", "192.168.16.201:5060") ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); } route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessy route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") if(sd_lookup("speed_dial")) route(SIPOUT); #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) route(SIPOUT); #!endif $avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } route(RELAY); exit; } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH #!ifdef WITH_IPAUTH if((!is_method("REGISTER")) && allow_source_address()) { # source IP allowed return; } #!endif if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!endif return; } # Caller NAT detection route route[NATDETECT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { add_contact_alias(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; rtpproxy_manage("co"); if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { add_contact_alias(); } } #!endif return; } # URI update for dialog requests route[DLGURI] { #!ifdef WITH_NAT if(!isdsturiset()) { handle_ruri_alias(); } #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } if (strempty($sel(cfg_get.pstn.gw_port))) { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); } else { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # route to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE")) return; # check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n"); return; } if($avp(oexten)==$null) return; $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); route(RELAY); exit; #!endif return; } # manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); } # manage incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") route(NATMANAGE); } # manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) { exit; } #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif }

11 years, 1 month

Re: [SR-Users] 477 Unfortunately error on sending to next hop occurred

by Daniel-Constantin Mierla

I'll check the logs and most probably have to do some test myself, but it's going to take a bit. Daniel On 8/23/13 2:50 PM, Steve Davies wrote: > > > > On 23 August 2013 14:24, Daniel-Constantin Mierla <miconda(a)gmail.com > <mailto:miconda@gmail.com>> wrote: > > Oh, I forgot that the group of t_set_* functions have one > parameter, to allow set/unset the flag. Use: > > t_set_disable_internal_reply(1); > > > Hi Daniel, > > Doesn't seem to work... > > > Kamailio sends back 500, 477, 477, 477 > > Return code from t_relay was still -1: > > t_set_disable_internal_reply(1); > $avp(senttoast) = 0; > $var(rr) = t_relay(); > xlog("L_NOTICE","SLD: in RELAY, t_relay returned $var(rr) > err.rcode is $err.rcode t_r_c is $T_reply_code sent = $avp(senttoast)\n"); > if ($var(rr) < 0) { > sl_reply_error(); > } > > > >> Aug 23 14:34:11 ubuntu /usr/local/sbin/kamailio[22785]: NOTICE: > <script>: SLD: in RELAY, t_relay returned -1 err.rcode is <null> t_r_c > is 100 sent = 0 > > > Thanks, > Steve > > > -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

11 years, 1 month

Kamailio Presence module

by Kethzer Docteur

I'm using kamailio 4.1 Im having problem to see witch user is online, I have the module presence.so and presence_xml.so load into the config file of Kamailio.cfg. #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) modparam("presence", "presentity_table", "presentity") modparam("presence", "active_watchers_table", "active_watchers") modparam("presence", "watchers_table", "watchers") modparam("presence", "db_update_period", 20) modparam("presence", "clean_period", 50) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif # handle presence related requests route(PRESENCE); Any help please? -- Kethzer Docteur

11 years, 1 month

477 Unfortunately error on sending to next hop occurred

by Steve Davies

Hi, I see that if 4.0.3 has a network error in sending a request, it sends back a 477 response, but does not execute the t_on_failure route block. Which I want to use to route the call via a local alternative gateway. I saw a bug that talked about the failure_exec_mode modparam, but that's not listed in the 4.0.3 documentation. Is there a way to get this to work? Thanks, Steve -- Steve Davies: Technical Director, Connection Telecom (Pty) Ltd Email is preferred, but: Phone: 0878200200

11 years, 1 month

Error message installing kamailio websocket

by Kethzer Docteur

CC (gcc) [M websocket.so] ws_frame.o In file included from ws_frame.c:25: /usr/include/unistr.h:189: error: expected ‘;’, ‘,’ or ‘)’ before ‘_UNUSED_PARAMETER_’ /usr/include/unistr.h:259: error: expected ‘;’, ‘,’ or ‘)’ before ‘_UNUSED_PARAMETER_’ make[1]: *** [ws_frame.o] Error 1 make: *** [modules] Error 1 -- Kethzer Docteur

11 years, 1 month

Re: [SR-Users] hanging active dialog...

by Daniel-Constantin Mierla

Have you listed the profile via kamctl or kamcmd? The commands are in the readme: http://kamailio.org/docs/modules/stable/modules/dialog.html#idp3737432 Is the afferent profile listing any dialog? Cheers, Daniel On 8/23/13 2:50 PM, Gertjan Wolzak wrote: > > Hello Carlos, > > I have been looking at your module, can't wait to work with it, > especially the prepaid part. > > But as this system is in production, can't just start experimenting, > want to.... But cant. > > So just have to wait for some tips on the cli.... > > But thanks. > > Rgds, > > Gertjan > > *From:*sr-users-bounces@lists.sip-router.org > [mailto:sr-users-bounces@lists.sip-router.org] *On Behalf Of *Carlos > Ruiz Díaz > *Sent:* vrijdag 23 augustus 2013 14:37 > *To:* Kamailio (SER) - Users Mailing List > *Subject:* Re: [SR-Users] hanging active dialog... > > I don't know what exactly happened in your case but if you don't have > time to investigate you can try cnxcc module [1] channel control to > achieve the same goal. > > Take a look at the sample configuration file located in [2] > > > xlog("L_INFO", "Setting up channel based credit control")/;/ > > > $var(max_chan) *=* 2; > > $var(retcode) = cnxcc_set_max_channels("$var(client)", "$var(max_chan)"); > > > if ($var(retcode) *=*= -1) { > > xlog("Error setting up credit control"); > return; > > } > > > $var(count) *=* -1; > > > if (!cnxcc_get_channel_count("$var(client)", "$var(count)")) { > > xlog("Error getting customer's channel count")/;/ > > } > > > xlog("L_INFO", "CNXCC ROUTE: $var(client) has $var(count) call(s)")/;/ > > > if ($var(retcode) < -1) { > > xlog("Too many channels for customer")/;/ > > sl_send_reply(403, "Forbidden")/;/ > > > if (!cnxcc_terminate_all("$var(client)")) { > > xlog("Error terminating customer's calls")/;/ > > } > > > exit/;/ > } > > > [1]http://kamailio.org/docs/modules/devel/modules/cnxcc.html > [2]https://github.com/caruizdiaz/cnxcc/blob/master/example/kamailio-cnxcc.cfg > > Regards, > Carlos > > > On Fri, Aug 23, 2013 at 5:16 AM, Gertjan Wolzak <g.wolzak(a)foize.com > <mailto:g.wolzak@foize.com>> wrote: > > Goodmorning All, > > I use the following route to check for concurrent calls by the same > user, if a concurrent call is tried it is not allowed. > > route[CONCURRENT] > > { > > xlog("SCRIPT: Conccurrent call check"); > > if(!get_profile_size("caller","$fu","$avp(nrcalls)")) > > { > > sl_send_reply("403", "Call not matching profile"); > > exit; > > } > > xlog("SCRIPT: caller value for $fu is $avp(nrcalls)"); > > if($avp(nrcalls)>= 1) > > { > > sl_send_reply("403", "Active calls limit exceeded"); > > exit; > > } > > dlg_manage(); > > if(!set_dlg_profile("caller","$fu")) > > { > > sl_send_reply("500", "No new channels in this profile"); > > exit; > > } > > xlog("SCRIPT: caller value for $fu is now $avp(nrcalls)"); > > } > > Now I had a situation where a user could not call because the > get_profile_size for this user gave the value 1. So another call was > not allowed. > > But the user did not have a call active. As no dialogs were active, > checked that. > > I assume there can be a lot of reasons why this happens, also I want > to use the "I don't want to know the cause" method to solve this. > > So I looked at the dialog module documentation, to see if I can just > clear the profile size for this specific user. > > I wanted to use the profile_list_dlgs(8.6) to get the dialog details, > then the dlg_terminate_dlg(8.4) to, you guessed it, terminate that dialog. > > But it's not clear to me how I can give those commands.... > > Is there a way to give those commands on the cli, if so can someone > please write down some examples... > > Would be really appreciated. > > Rgds, > > Gertjan > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > -- > Carlos > > http://caruizdiaz.com > > +595981146623 > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

11 years, 1 month

← Newer
1
...
4
5
6
7
8
9
10
...
18
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users August 2013