sr-users July 2014

sr-users@lists.kamailio.org

98 participants
140 discussions

by Rob Moore

Hi All, Since we've been using sipPhones as a proxy for registrations and calls to phones over TCP. I've been seeing a couple of these crop up in the logs. /usr/sbin/kamailio[4255]: ERROR: <core> [tcp_read.c:1131]: ERROR: tcp_read_req: error reading /usr/sbin/kamailio[4255]: ERROR: <core> [tcp_read.c:293]: error reading: Connection reset by peer (104) We haven't had any complaints of problems with the phones so if these are not a problem I'd like to know how to clean them up. Any suggestions on cause or solution would be fantastic. Thanks in advance. Rob Kind regards, Robert Moore Telephony System Architect [Description: Aeriandi] m. +44 (0)7766 838 040 t. +44 (0)845 108 0308 [cid:image002.png@01CF8C82.823C49E0]<http://www.retailweektechnologyawards.com/winners-2014> Aeriandi Ltd / Prama House, 267 Banbury Road, Oxford OX2 7HT / +44 (0)845 108 0308 / info(a)aeriandi.com<mailto:info@aeriandi.com> / aeriandi.com<http://www.aeriandi.com/> This transmission is intended solely for the addressee and may be confidential. If you are not the named addressee, or if the message has been addressed to you in error, you must not read, disclose, reproduce, distribute or use this transmission. Please delete the message or contact the sender. Delivery of this message to any person other than the named addressee is not intended in any way to waive confidentiality. Please note that neither Aeriandi Ltd nor the sender accepts any responsibility for any viruses, which may be transmitted, and it is your responsibility to scan attachments (if any).

10 years, 4 months

msilo possible bug

by Kelvin Chua

Hi guys, i think i have stumbled on an msilo bug. m_dump() is not working. kamctl fifo get_statistics all | grep mess msilo:dumped_messages = 0 msilo:failed_messages = 0 msilo:stored_messages = 1 so here we can see there is a message to be delivered. i turned on debug mode, then the intended destination of message logs in. then this is what i see on logs DEBUG: msilo [msilo.c:1082]: m_dump(): dumping [1] messages for <sip:XX85X80X74@1X8.1X9.1X7.1X3>!!! DEBUG: msilo [ms_msg_list.c:169]: msg_list_check_msg(): checking msgid=405 DEBUG: msilo [ms_msg_list.c:207]: msg_list_check_msg(): msg already in sent list. DEBUG: msilo [msilo.c:1089]: m_dump(): message[0] mid=405 already sent. using ngrep, no message was ever seen on the wire. then, kamctl fifo get_statistics all | grep mess msilo:dumped_messages = 0 msilo:failed_messages = 0 msilo:stored_messages = 1 still the same. anybody experienced this? Kelvin Chua

10 years, 4 months

Fedora 18-20 GeoIP missing?

by Roberto Fichera

Hi All, is there any reason why the GeoIP module is missing in the Fedora repo? Thanks in advance. Roberto Fichera.

10 years, 4 months

Possible GPL violation by third party (4PSA)

by Matthew Costa

4PSA develop and sell a software suite called VoipNow Professional (version 2.5) which, amongst other things, includes it's own packaged copy of Kamailio. This version is derived from Kamailio version 1.5.4. The software installs a binary release from a 4PSA repository. The RPM information contains the following: # rpm -qi voipnow-kamailio-1.5.4-130312.41.rhel5 Name : voipnow-kamailio Relocations: (not relocatable) Version : 1.5.4 Vendor: Rack-Soft, Inc <devel(a)4psa.com> Release : 130312.41.rhel5 Build Date: Tue 12 Mar 2013 18:31:30 EST Install Date: Sun 02 Feb 2014 00:15:14 EST Build Host: rhel5-1.64b.build.4psa.ro Group : System Environment/Daemons Source RPM: voipnow-kamailio-1.5.4-130312.41.rhel5.src.rpm Size : 6599403 License: GPL Signature : RSA/SHA1, Tue 12 Mar 2013 18:35:28 EST, Key ID 42ba8c472f75de11 Packager : Rack-Soft, Inc <devel(a)4psa.com> URL : http://kamailio.org/ Summary : Kamailio, a very fast and flexible SIP Proxy I've made a direct request to 4PSA for the source code for this package, only to be told they don't release their sources. The request, and subsequent response, can be found at http://my.4psa.com/4psa/topics/where_can_i_find_the_source_code_for_the_voi pnow_2_5_x_modified_version_of_kamailio. For those interested, the following packages are included with VoipNow which are derived from GPL software. There is no source available for any of these from the vendor. # rpm -qa |grep voipnow voipnow-spandsp-0.0.6-100708.10.rhel5 voipnow-asterisk-1.6.1.20-130312.07.rhel5 voipnow-asterisk-addons-1.6.1-130131.30.rhel5 voipnow-php-2.5.5-130312.11.rhel5 voipnow-sox-14.3.1-100723.30.rhel5 voipnow-asterisk-sounds-1.4.22-100723.25.rhel5 voipnow-kamailio-1.5.4-130312.41.rhel5 voipnow-ejabberd-2.1.4-100723.29.rhel5 voipnow-asterisk-debuginfo-1.6.1.20-120417.09.rhel5 voipnow-asterisk-extra-2.5.5-130312.11.rhel5 My requests are falling on deaf ears. Does anybody know how to make them take this matter seriously? Cheers, Matthew Costa Infrastructure Manager <http://www.greenlight-itc.com/> Suite 703, Level 7 815 Pacific Highway Chatswood 2067 tel: 02 8412 0000 fax: 02 8412 0001

10 years, 4 months

Re: [SR-Users] Kamailio Freepbx Integration Dropping Calls

by Carlos Rangel

Hello List Hopefully someone can help. This is the problem when the call is hug up 20-30 seconds after it initiates. The call is only hung on when the remote extension initiates the call. If the remote extension receives the call there is no problem the call is not hung on. I changed the remote cisco phone for a yealink and it is the same behavior. It thought it was the phone. This is what I am using in kamailio.cfg #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_ASTERISK #!define WITH_USRLOCDB #!define WITH_ANTIFLOOD Remote User Internet Internal network Yealink IP TG28P ----DSL router ---|------Internet --------|-----Cisco ASA 5500 FW--------------Kamailio/Freepbx (Same Box)------IAX Trunk----------Freepbx Production Server --------|------ PSTN Thanks Carlos Rangel De: Carlos Rangel [mailto:crangel@globaltelesourcing.com] Enviado el: jueves, 26 de junio de 2014 01:27 p.m. Para: miconda(a)gmail.com; 'Kamailio (SER) - Users Mailing List' Asunto: RE: [SR-Users] Kamailio Freepbx Integration Dropping Calls Hi Daniel Thank you so much for your response. Here is the SIP trace of one of the calls, I am not sure where the call initiates but you can see at the end of the file in bold X-Asterisk-HangupCause: No user responding. I am not sure why is it sending this message though. The variables are Extension/Username=XXXXX Ext_IP= Public IP Internal_IP= Asterisk/Kamailio internal IP Sorry for the long file but again I am not sure where the call initiates This is the part where that call is hung on. U 2014/06/26 13:36:11.831965 Kamailio_IP:5080 -> Kamailio_IP:5060 BYE sip:XXXXX@65.190.71.203:5060;user=phone;transport=udp SIP/2.0. Via: SIP/2.0/UDP Kamailio_IP:5080;branch=z9hG4bK7ce1be47. Route: <sip:Kamailio_IP;lr=on;ftag=000653dc394000970f227678-1fafb4e2>. Max-Forwards: 70. From: <sip:919707249077@Kamailio_IP:5060>;tag=as2e670ea4. To: "User" <sip:XXXXX@Kamailio_IP:5060>;tag=000653dc394000970f227678-1fafb4e2. Call-ID: 000653dc-3940000b-33caf1b2-20ccd185(a)192.168.0.22. CSeq: 102 BYE. User-Agent: FPBX-2.11.0(11.10.2). X-Asterisk-HangupCause: No user responding. X-Asterisk-HangupCauseCode: 18. Content-Length: 0. . U 2014/06/26 13:36:11.832260 Kamailio_IP:5060 -> 65.190.71.203:5060 BYE sip:XXXXX@65.190.71.203:5060;user=phone;transport=udp SIP/2.0. Via: SIP/2.0/UDP Kamailio_IP;branch=z9hG4bKcf68.d6ef5aa9cc5bd0fb0ab13a563b7cf284.0. Via: SIP/2.0/UDP Kamailio_IP:5080;branch=z9hG4bK7ce1be47. Max-Forwards: 69. From: <sip:919707249077@Kamailio_IP:5060>;tag=as2e670ea4. To: "User" <sip:XXXXX@Kamailio_IP:5060>;tag=000653dc394000970f227678-1fafb4e2. Call-ID: 000653dc-3940000b-33caf1b2-20ccd185(a)192.168.0.22. CSeq: 102 BYE. User-Agent: FPBX-2.11.0(11.10.2). X-Asterisk-HangupCause: No user responding. X-Asterisk-HangupCauseCode: 18. Content-Length: 0. Descripción: Description: Description: DLR-Logo-No-TextCARLOS RANGEL | INFORMATION TECHNOLOGY DIRECTOR Global Telesourcing México, S. de R.L. de C.V. | Aarón Sáenz #1891-1 | Monterrey, N.L., México Direct 703 894 1667 | Mobile US 703 894 1667 | Mobile MX +52 1 812 000 7362 | crangel(a)globaltelesourcing.com ________________________________________________________________________________________________________________ The information contained in this e-mail and any attached documents may contain information that is confidential or otherwise protected from disclosure. If you are not the intended recipient of this message, or if this message has been sent to you in error, please immediately alert the sender by reply e-mail and then delete this message, including any attachments. Any dissemination, distribution or other use of the contents of this message by anyone other than the intended recipient is strictly prohibited. De: sr-users-bounces(a)lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] En nombre de Daniel-Constantin Mierla Enviado el: jueves, 26 de junio de 2014 03:12 a.m. Para: Kamailio (SER) - Users Mailing List Asunto: Re: [SR-Users] Kamailio Freepbx Integration Dropping Calls Hello, can you gran the SIP trace on kamailio server for such case? You can use ngrep, like: ngrep -d any -qt -W byline port 5060 and send the output to the mailing list. You can replace any sensitive information (e.g., ip address) before sending to mailing list. The typical call drop after 30-40 secs is when ACK is not routed properly, but we have to see that in the sip trace. Cheers, Daniel On 25/06/14 18:50, Carlos Rangel wrote: Hello I have successfully (I believe) implemented Kamailio 4.1.4 integration with Freepbx 5.2.11 taking as a guide Daniel’s tutorial http://kb.asipto.com/asterisk:realtime:kamailio-4.0.x-asterisk-11.3.0-astdb. I just did not create the voicemail tables because voice mail is handled by Freepbx. I installed the system in a separate box for testing and connected to the Freepbx Production server via IAX trunk. The system is behind a Cisco Firewall and looks like this Remote User Internet Internal network Cisco 7960 ----DSL router ---|------Internet --------|-----Cisco ASA 5500 FW--------------Kamailio/Freepbx (Same Box)------IAX Trunk----------Freepbx Production Server --------|------ PSTN I have configured the FW to allow UDP and TCP traffic from the corresponding IP as well as tfpt that is needed for the Ciscos to pick up the configuration from the server. I have a few remotes Cisco 7960 phones that can register remotely in Kamailio as long as the user is added with kamctl add user password and as long as the extension is created in Freepbx. The problem that I have is when try to make a call from the remote Ciscos the call is dropped after 30 or 40 seconds. I can see from the logs that the problem appears to be that the server is not receiving responses from the phone 06-25 10:57:30] WARNING[1814] chan_sip.c: Retransmission timeout reached on transmission 000653dc-39400006-2579bbcd-13d9adcb(a)192.168.0.22 for seqno 102 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 32001ms with no response [2014-06-25 10:57:30] WARNING[1814] chan_sip.c: Hanging up call 000653dc-39400006-2579bbcd-13d9adcb(a)192.168.0.22 - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). Is this something that we can adjust in kamailio or could it be related to the FW configuration?? Sorry but I am very new to kamailio and sip. Thanks Carlos _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

10 years, 4 months

installation siremis error

by Hossein Aghaie

hi after install kamailio 4.1.0 on ubuntu server,I try to install siremis-4.1.0 of this Doc : http://kb.asipto.com/siremis:install41x:main but to end setup,show this error : http://paste.fedoraproject.org/114029/ how to solved this problem? tnx

10 years, 4 months

Kamailio Development Workshop, July 9-10, 2014, Paris, France

by Daniel-Constantin Mierla

Hello, I want to announce the next Kamailio Development Workshop, to take place in Paris, France, during July 9-10, 2014. This event is the next in its series targeting to show the internals of Kamailio and enable more people to become developers as well as let users of Kamailio to get more knowledge about the design of the application which can have relevant impact in operating deployment. Be aware that it is not a workshop about Kamailio installation and administration. Its content is about writing C code to extend Kamailio. More details can be found at: - http://www.kamailio.org/w/2014/06/kamailio-development-workshop-july-9-10-2… Similar to the past events, we are considering to have a social networking event in the evening of July 9 (most probably a dinner meetup at a nice place in Paris), which is open for everyone, each participant taking care of own expenses. Cheers, Daniel -- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

10 years, 4 months

how to compile module db_oracle on Centos 6.5

by Konstantin Khatskevich

Hello! 5. Installation Because it dependes on an external library, the oracle module is not compiled and installed by default. You can use one of the next options. * - edit the "Makefile" and remove "db_oracle" from "excluded_modules" list. Then follow the standard procedure to install Kamailio: "make all; make install". * - from command line use: 'make all include_modules="db_oracle"; make install include_modules="db_oracle"'. But "db_oracle: requires non-free Oracle client SDK" (http://lists.sip-router.org/pipermail/sr-dev/2013-October/021803.html) What can I do? -- Best regards, Konstantin Khatskevich

10 years, 4 months

Changes in registrar module source code

by aawaise

Hello, I am a user of kamailio server. I am in need to pick domain of particular online users from location list. I found out that usrloc module is used for Location Table items. And we cant directly export parameters from usrloc module. I decided to use registrar module to approach domain parameter of usrloc module. I want to understand complete flow control in registrar module source code, so that I can add my commands to pick domain parameter from usrloc module. How can it be done ? Secondly, if I make a change in registrar module, to see its reaction, I will have to recompile kamailio server or is there any shortcut to immediately see effect of changes made in registrar module ?? Any help will be appreciated. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Changes-in-registrar-module-source-… Sent from the Users mailing list archive at Nabble.com.

10 years, 4 months

Siremis 4.1.0 menu adjustment for different users

by Fred

Hi, I'm setting up a Registrar server using Kamailio 4.1.3 with Siremis 4.1.0 as WebGUI. On Siremis I struggle to set up different users which only see limited menu items. What I want to do is e.g. an user called "CustomerService" which only sees the "Subscriber_List" menu item and a second user called "SystemAdmin" which only sees the "Dispatcher_List" menu item. I tried different things with new roles, groups and adjustments in the menu administration but didn't manage to get the desired result. Does anyone have a hint for me if that is possible and how? Thanks Fred

10 years, 4 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2014