Hello everyone...
I'm testing various ways of setting up Kamailio and FreeSWITCH (as
VAS-handler).
I'm struggling a bit on what Kamailio should do and FreeSWITCH should do.
My basic setup is to handle voicemails, internal calls between subscribers
and outgoing calls to a SIP gateway to GSM.
My idea is to have Kamailio handle all calls and routing between
subscribers and the SIP gateway and only have FreeSWITCH handle voicemail
(to save the audio file and e-mail it).
How does that sound?
Or should I route everything to FreeSWITCH via Kamailio and have FreeSWITCH
route calls between subcsribers and SIP gateway as well?
What are best practises etc...?
Hello (sorry for my bad english) - i try to create voice record service
by request. User A call to user B. In call by pressing combination like
*55 Kamailio must redirect both sides to asterisk, whitch create dynamic
conference room with recording. As i understand i need to use
dlg_refer() from dialog module, but in log file i get:
Konsole output
Sep 4 10:45:14 voipc-node2 /usr/local/sbin/kamailio[18941]: ERROR:
dialog [dlg_req_within.c:85]: build_dlg_t(): no contact available
Sep 4 10:45:14 voipc-node2 /usr/local/sbin/kamailio[18941]: ERROR:
dialog [dlg_transfer.c:188]: dlg_refer_callee(): failed to create dlg_t
In script i try to refer with:
dlg_refer("callee", "sip:100@10.10.9.209");
dlg_refer("caller", "sip:100@10.10.9.209");
--
Ярин Андрей
Инженер ООО "И.С.-Телеком"
8(351)7786878 доб 113
8(351)2555724 доб 113
8(351)2555787 доб 113
I'm running the standard Debian 7 Kamailio 4.3 package.
I've added the following to my kamailio.cfg:
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_NAT
#!define WITH_TLS
#!define WITH_ANTIFLOOD
After authentication, nat etc. is done is there an easy way to transfer
everything else to FreeSWITCH?
I've looked at the dispatcher module, but don't know where to put the
"transfer" in kamailio.cfg?
Hello Giovanni,
I fixed webrtc call working right now. I checked debug again and I so 408 error. There was missing record_route() for first INVITE.
Thank you for help.
Slava.
From: "Giovanni Maruzzelli" <gmaruzz(a)gmail.com>
To: "sr-users" <sr-users(a)lists.sip-router.org>
Sent: Saturday, 5 September, 2015 07:50:29
Subject: Re: [SR-Users] webrtc
First thing, check that you can have a webRTC call directly with FreeSWITCH, without passing by Kamailio.
If that works, and it does not work through Kamailio, then provide kamailio config, freeswitch config, and debug log from both.
On Sat, Sep 5, 2015 at 12:51 AM, Slava Bendersky < volga629(a)skillsearch.ca > wrote:
Hello Everyone,
I am trying setup webrtc call with freeswitch.
[root@canlvprx01 kamailio]# rpm -qa | grep kamailio
kamailio-4.3.1-4.4.fc21.x86_64
Case:
INTERNET eth0 | eth1 LAN
|
Web Browser ---->webrtc ----> kamailio ----> freeswitch
Getting this error
Sep 4 00:22:06 canlvprx01 /usr/sbin/kamailio[11820]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:10 canlvprx01 /usr/sbin/kamailio[11817]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:14 canlvprx01 /usr/sbin/kamailio[11818]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Tried check debug don't see any thing special. Any help thank you. Please let me know which logs will good to provide.
Slava.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Sincerely,
Giovanni Maruzzelli
Cell : +39-347-2665618
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello Giovanni,
Here SDP webrtc call traffic capture on kamailio side
http://fpaste.org/264289/15798761/
password from paste: kamailio
Slava.
From: "Giovanni Maruzzelli" <gmaruzz(a)gmail.com>
To: "sr-users" <sr-users(a)lists.sip-router.org>
Sent: Saturday, 5 September, 2015 07:50:29
Subject: Re: [SR-Users] webrtc
First thing, check that you can have a webRTC call directly with FreeSWITCH, without passing by Kamailio.
If that works, and it does not work through Kamailio, then provide kamailio config, freeswitch config, and debug log from both.
On Sat, Sep 5, 2015 at 12:51 AM, Slava Bendersky < volga629(a)skillsearch.ca > wrote:
Hello Everyone,
I am trying setup webrtc call with freeswitch.
[root@canlvprx01 kamailio]# rpm -qa | grep kamailio
kamailio-4.3.1-4.4.fc21.x86_64
Case:
INTERNET eth0 | eth1 LAN
|
Web Browser ---->webrtc ----> kamailio ----> freeswitch
Getting this error
Sep 4 00:22:06 canlvprx01 /usr/sbin/kamailio[11820]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:10 canlvprx01 /usr/sbin/kamailio[11817]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:14 canlvprx01 /usr/sbin/kamailio[11818]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Tried check debug don't see any thing special. Any help thank you. Please let me know which logs will good to provide.
Slava.
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Sincerely,
Giovanni Maruzzelli
Cell : +39-347-2665618
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi all,
I have a quick question with regards the topoh module, is it possible to
have the topoh module only operate on a particular interface and direction.
I have some edge proxies and I am trying out the topoh module, what I
see happen is that messages originating from behind/inside the edge
proxy is topoh'd out, which is exactly what I was looking for, but it
appears to do the same for messages originating from the wild, so
messages pushed in behind/inside the proxy is also encoded, which is not
what I was expecting.
Is it possible to configure the topoh module to activate for messages
being sent out of the edge proxy into the "wild", but not the other way
around, or, decode if it finds an encoded messages who's destination is
"behind" the proxy.
Any thoughts are much appreciated.
Thanks
Hello Everyone,
I am trying setup webrtc call with freeswitch.
[root@canlvprx01 kamailio]# rpm -qa | grep kamailio
kamailio-4.3.1-4.4.fc21.x86_64
Case:
INTERNET eth0 | eth1 LAN
|
Web Browser ---->webrtc ----> kamailio ----> freeswitch
Getting this error
Sep 4 00:22:06 canlvprx01 /usr/sbin/kamailio[11820]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:10 canlvprx01 /usr/sbin/kamailio[11817]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Sep 4 00:22:14 canlvprx01 /usr/sbin/kamailio[11818]: WARNING: <core> [forward.h:164]: msg_send(): TCP/TLS connection for WebSocket could not be found
Tried check debug don't see any thing special. Any help thank you. Please let me know which logs will good to provide.
Slava.
Good morning.
Has anyone seen this too?
Looking forward to hear from you.
BR,
--
*Nuno Miguel Reis* | *Unified Communication** Systems*
M. +351 913907481 | nreis(a)wavecom.pt
WAVECOM-Soluções Rádio, S.A.
Cacia Park | Rua do Progresso, Lote 15
3800-639 AVEIRO | Portugal
T. +351 309 700 225 | F. +351 234 919 191
*GPS
<http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…>
| www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>*
<http://www.wavecom.pt/>
<http://www.wavecom.pt/pt/>
On Fri, Aug 14, 2015 at 1:41 AM, Nuno Reis <nreis(a)wavecom.pt> wrote:
> Hi guys.
>
> I've noticed this CRITICAL log line on kamailio startup:
>
> CRITICAL: dialog [dlg_cb.c:137]: register_dlgcb(): DLGCB_CREATED type
> registered after shutdown!?!
>
>
> This line started to show up after upgrade from 4.2.x to 4.3 and now to
> 4.3.1.
> Everything seems to be working fine and a really don't see any harm
> anywhere.
> Could you please comment on this?
>
> Cheers,
>
> --
>
> *Nuno Miguel Reis* | *Unified Communication** Systems*
> M. +351 913907481 | nreis(a)wavecom.pt
> WAVECOM-Soluções Rádio, S.A.
> Cacia Park | Rua do Progresso, Lote 15
> 3800-639 AVEIRO | Portugal
> T. +351 309 700 225 | F. +351 234 919 191
> *GPS
> <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…>
> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>*
>
> <http://www.wavecom.pt/>
> <http://www.wavecom.pt/pt/>
>
>
>