Hi
I am novice to kamailio , I have installed kamailio-4.2.0 and SIREMIS. I
have add and registered two IP phones with kamailio these phone able to
call each other.
How can i make outbound call with that I am using a asterisk server as PSTN
Gateway. i am not famalier with kamailio script.
Regards
Sharad Tyagi
SparkTG info Pvt Ltd
Hi, I have Kamailio as SIP server and RTP server. Client is PJSIP.
I read that STUN is for non-symmetric NAT, and RTP server is for symmetric
NAT.
Supposed A calls B.
If A, B both use symmetric NAT and STUN, they cannot hear each other
If A or B use non-symmetric NAT and NOT using STUN, they cannot hear each
other.
Why is that?
I read http://tools.ietf.org/id/draft-takeda-symmetric-nat-traversal-00.txt
for Prediction Failure, is that related to this problem ?
--
Khoa Pham
HCMC University of Science
Faculty of Information Technology
Hi Guys,
Im using a keepalived solution between 2 kamailio boxes, with
net.ipv4.ip_nonlocal_bind
=1 .
On the "non master" I pretty much constantly get these logs in syslog.
What Im looking for is a way to suppress these because they are expected in
my configuration.
is there any way to tell kamailio to not log this... ( or at least, not at
CRIT and ERROR )
*Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: tm
[../../forward.h:208]: msg_send(): udp_send failed*
*Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: <core>
[udp_server.c:576]: udp_send():
sendto(sock,0x7fc0732d5ab0,380,0,xxx.xxx.xxx.xxx:5060,16): Invalid
argument(22)*
*Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: CRITICAL: <core>
[udp_server.c:581]: udp_send(): invalid sendtoparameters#012one possible
reason is the server is bound to localhost and#012attempts to send to the
net*
--
Sincerely
Jay
I'm involved in setting up a Kamailio instance and was hoping to make use of the auth_ephemeral module for authentication. But the module documentation doesn't quite make clear how exactly the module is to be employed or the web service set up. Does anyone have a working example?
Regards,
Hemanshu Vadehra
hemanshu.v(a)directi.com
Hi there,
I'm facing some issues trying to install siremis with postgresql.
The file Config.xml has the correct configuration for postgresql driver but
It seems that during installation phase siremis can't create database
structure for postgresql.
Anyone have installed siremis with postgresql, if yes can you share the
steps needed for this installation.
--
Cumprimentos
José Seabra
Hi all,
I'm switching my development environment from Linux to Mac.
Is there any tutorial on how to setup Kamailio on this OS? It may be an
Unix flavor, but it's still quite different from Linux :).
Thanks,
--
Carlos
http://caruizdiaz.comhttp://ngvoice.com
+52 55 3048 3303
Hello,
a short note to announce that the os on kamailio.org server will be
upgraded in the near future, likely next week, exact date still to be
decided. Hopefully there will be only very short downtime intervals.
Main affected services: website (including the wiki) and mailing lists.
I will send a notification once the procedure starts, but I wanted to
allow enough time for this information to propagate properly within the
community.
Cheers,
Daniel
--
Daniel-Constantin Mierla
http://www.asipto.com - http://www.kamailio.orghttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Hi,
I upgraded one of our systems today to 4.4.1. And when checking
whether everything is okay, I noticed, that only the first UDP
listener (from kamcmd core.ps) is actually sending lines to the log.
The only other logs I see are from usrloc timer worker.
kamcmd> core.ps
10737
main process - attendant
10740
udp receiver child=0 sock=172.20.40.5:5060
10741
udp receiver child=1 sock=172.20.40.5:5060
10742
udp receiver child=2 sock=172.20.40.5:5060
10743
udp receiver child=3 sock=172.20.40.5:5060
We are sending quite a lot of information via xlog("L_NOTICE", "foo");
to syslog, but the only lines I see are from PID 10740. Kamailio works
fine otherwise, handling all requests, the usrloc entries didn't drop,
and customers don't complain. So I think it's only a logging issue.
There are about 50k registrations on the machine and more than 10 Mbit
of traffic.
When I downgrade to 4.3.5, I get output from all listeners again.
Has there been any change between 4.3 and 4.4 regarding logging? The
upgrade document says nothing about this.
Best Regards,
Sebastian
Hi All,
I am trying to bring-up PCSCF on releae 4.4 and I am getting errors related
to loading of ims_dialog module.
The mpath is set correctly in kamailio.cfg and ims_dialog.so is present in
that path.
Interestingly, it is able to load rest of the modules from the same
locaiton.
ls -lrt /usr/local/lib64/kamailio/modules/ims_dialog.so
-rwxr-xr-x 1 root root 953760 Jun 29 16:37
/usr/local/lib64/kamailio/modules/ims_dialog.so
Any pointers will be appreciated.
-- Unit kamailio.service has begun starting up.
Jun 29 17:08:17 kamailio1 kamctl[2914]: ** INFO: Starting Kamailio :
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [sr_module.c:582]:
load_module(): could not open module
</usr/local/lib64/kamailio/modules/ims_dialog.so
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3365]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 169, colum
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]:
set_mod_param_regex(): No module matching <ims_dialog> found
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 313, colum
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]:
set_mod_param_regex(): No module matching <ims_dialog> found
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 314, colum
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]:
set_mod_param_regex(): No module matching <ims_dialog> found
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 315, colum
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [modparam.c:150]:
set_mod_param_regex(): No module matching <ims_dialog> found
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 316, colum
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [cfg.y:3228]:
yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 1009, colu
Jun 29 17:08:17 kamailio1 kamailio[2939]: ERROR: <core> [cfg.y:3228]:
yyparse(): cfg. parser: failed to find command set_dlg_profile (params 1)
Jun 29 17:08:17 kamailio1 kamailio[2939]: : <core> [cfg.y:3368]:
yyerror_at(): parse error in config file
/usr/local/etc/kamailio//kamailio.cfg, line 1077, colu
Jun 29 17:08:17 kamailio1 kamailio[2939]: INFO: <core> [sctp_core.c:53]:
sctp_core_destroy(): SCTP API not initialized
Jun 29 17:08:20 kamailio1 kamctl[2914]: ** ERROR: PID file
/var/run/kamailio.pid does not exist -- Kamailio start failed
Jun 29 17:08:20 kamailio1 systemd[1]: kamailio.service: Control process
exited, code=exited status=1
Jun 29 17:08:20 kamailio1 systemd[1]: Failed to start Kamailio SIP Server.
-- Subject: Unit kamailio.service has failed
Thanks
