sr-users September 2016

sr-users@lists.kamailio.org

87 participants
130 discussions

Location Table In db_mode 3
by Gholamreza Sabery 23 Sep '16

23 Sep '16

I have multiple Kamailio servers in an Active/Active scenario (the database is a MySQL server) using db_mode 3. But when the number of clients goes up writes on the location table become too much and it causes database problems. I even put my location table on a separate SSD disk on the server to separate it's IO but still at times I have problems. How can I move location table into memory? Is this a good solution? What other options do I have?

1 0

Dimension number of child
by Igor Potjevlesch 23 Sep '16

23 Sep '16

Hello, I'm wondering if there's a best practise to dimension the number of child to setup? I see, very often, Kamailio that stops to reply to SIP traffic for couple a seconds. This cause some calls drop if RE-INVITE are not processed for example. So, I'm wondering if the issue is not due to a lack of child for processing the SIP traffic. Thank you for your inputs. Regards, Igor.

1 0

failed to find command http_async_query - Even though module loaded
by Jonathan Hunter 23 Sep '16

23 Sep '16

Hi guys, I am using the http_async_client module to POST some requests to a Web Interface, and on server 1 it all works well. I have done a fresh install from github, version 4.4 on Centos 6.8 on server 2, and kamailio wont start. Its the same configuration file, however it states; failed to find command http_async_query (params 3) However the module is loaded, and when installing no errors were written when creating the module, and in terms of its links they are below and look ok to me. Is there anywhere else I should be looking? Thanks Jon ldd http_async_client.so linux-vdso.so.1 => (0x00007ffecedf1000) libcurl.so.4 => /usr/lib64/libcurl.so.4 (0x00007fdc5bd63000) libevent-2.0.so.5 => /usr/lib64/libevent-2.0.so.5 (0x00007fdc5bb1c000) libsrutils.so.1 => /usr/local/kamailio-4.4/lib64/kamailio/libsrutils.so.1 (0x00007fdc5b90c000) libkcore.so.1 => /usr/local/kamailio-4.4/lib64/kamailio/libkcore.so.1 (0x00007fdc5b6ff000) libc.so.6 => /lib64/libc.so.6 (0x00007fdc5b36a000) libidn.so.11 => /lib64/libidn.so.11 (0x00007fdc5b138000) libldap-2.4.so.2 => /lib64/libldap-2.4.so.2 (0x00007fdc5aee7000) librt.so.1 => /lib64/librt.so.1 (0x00007fdc5acde000) libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00007fdc5aa9a000) libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fdc5a7b3000) libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fdc5a586000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fdc5a382000) libz.so.1 => /lib64/libz.so.1 (0x00007fdc5a16c000) libssl3.so => /usr/lib64/libssl3.so (0x00007fdc59f28000) libsmime3.so => /usr/lib64/libsmime3.so (0x00007fdc59cfb000) libnss3.so => /usr/lib64/libnss3.so (0x00007fdc599bb000) libnssutil3.so => /usr/lib64/libnssutil3.so (0x00007fdc5978e000) libplds4.so => /lib64/libplds4.so (0x00007fdc5958a000) libplc4.so => /lib64/libplc4.so (0x00007fdc59385000) libnspr4.so => /lib64/libnspr4.so (0x00007fdc59146000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fdc58f29000) libdl.so.2 => /lib64/libdl.so.2 (0x00007fdc58d25000) libssh2.so.1 => /usr/lib64/libssh2.so.1 (0x00007fdc58afc000) libm.so.6 => /lib64/libm.so.6 (0x00007fdc58878000) /lib64/ld-linux-x86-64.so.2 (0x00007fdc5c1f8000) liblber-2.4.so.2 => /lib64/liblber-2.4.so.2 (0x00007fdc58668000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fdc5844e000) libsasl2.so.2 => /usr/lib64/libsasl2.so.2 (0x00007fdc58234000) libkrb5support.so.0 => /lib64/libkrb5support.so.0 (0x00007fdc58028000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fdc57e25000) libssl.so.10 => /usr/lib64/libssl.so.10 (0x00007fdc57bb8000) libcrypto.so.10 => /usr/lib64/libcrypto.so.10 (0x00007fdc577d4000) libcrypt.so.1 => /lib64/libcrypt.so.1 (0x00007fdc5759d000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fdc5737d000) libfreebl3.so => /lib64/libfreebl3.so (0x00007fdc5717a000)

2 2

Selective rport behaviour
by Alex Balashov 23 Sep '16

23 Sep '16

Hi, In some scenarios, it happens that a request is received with the following characteristics: IP xxx.xxx.xxx.xxx:14000 -> server:5060 Via: SIP/2.0/xxx.xxx.xxx.xxx:5060;branch=9hG4bKblah;rport Normally, we just force_rport() on all incoming requests so that we reply to the real source port of the request, since most endpoints on this installation are NAT'd. However, occasionally we run into a scenario where an ALG or misconfigured client incorrectly inserts an rport attribute into its topmost Via, and really expects to receive a response at the address/port indicated in the Via (i.e. 5060). Does Kamailio offer a means of dealing with these on a selective basis? Would refraining from calling force_rport() be enough? Or would it be necessary to set reply_to_via=1 as well, thus breaking symmetrical behaviour for the vast majority of the NAT'd endpoints? In other words, I'm not 100% clear on the following: 1) What impact does force_rport() have if an 'rport' attribute is sent by the client? In this case, there should be nothing to "force"; I assume that if the 'rport' attribute is placed by the client, then the proxy will return replies to the source port of the request even if force_rport() is not called, because that's the RFC 3581-compatible thing to do. Right? 2) Does reply_to_via=1 override the behaviour hypothesised in #1? 3) Does reply_to_via=1 override force_rport()? Thanks! -- Alex -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 (direct) / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

3 3

Killing dialog using kamcmd
by Laura 22 Sep '16

22 Sep '16

Dear list, i have developed a tool that automatically stop the call after some trigger i use.. For do that i use the kamcmd dlg.end_dlg command. It work perfectly but i have noticed a problem over the kamailio acc table. When i kill a specific call using this command.. the acc table don't write the BYE record for the dialog.. Is that correct ? how can i fix.. I'm using ngrep for verify the SIP dialog and i see the BYE command correctly on the A and B leg of the call.. Thanks for any idea. Laura

2 2

ndb_mongodb -Sending Query to Mongo
by Jonathan Hunter 22 Sep '16

22 Sep '16

Hi Guys, I am using the ndb_mongodb module, and Im just trying to return values from the dispatcher table, in particular the setid of a particular entry depending on its attrs value. If I query using mongodb shell command it works fine, here I enter test.com and it returns only the setid value, or 2; db.dispatcher.find( { attrs: "test.com" }, { setid: 1, _id: 0 } ){ "setid" : 2 } However I have been having issues getting this to work using mongodb_find_one, as I would of thought the following route return the same; if(mongodb_find_one("ml-mongodb", "kamailiosbc", "dispatcher", "{ \"attrs\" : \"test.com\" },{ \"setid\": \"1\", \"_id\": \"0\" }", "mgr1")) However it returns all the entries relating to that attrs columm from dispatcher table, instead of just setid. Is it possible to do this? I am stuggling to find the json format to acheive the same thing. Also in terms of the mgr1 response, I see its contained within the $mongodb(key), can I drill down to get specific fields from it or would I need to use transformations or jansson to do this? Many thanks Jon

2 2

STUN server - stun_allow_stun
by Hermann Norpois 22 Sep '16

22 Sep '16

Hello, I have some STUN questions. My plan is to build a P2P connection with ICE (psua2 or libnice). 1) According to the cookbook ( http://www.kamailio.org/wiki/cookbooks/4.0.x/core) one can activate an internal STUN server: stun_allow_stun = 0 | 1 (off | on); default 1 This is followed by: "Note: STUN support is only available if sip-router/Kamailio was compiled with STUN support (“make STUN=1 cfg”)" I did an installation with sudo apt-get ... Is STUN support availbable? How do I check for STUN support? 2) I ICE it seems to be usual that the body of the SIP request contains an SDP message that includes the IP addresses and ports to be used. So the results of the STUN request (and TURN request possibily) are already included. How does the kamailio STUN server work? Is it an independent STUN server (caller asks the kamailio STUN server - gets an answer - encodes an SDP with the external IP adress an port information - starts the SIP INVITE) ? Or does Kamailio change SDP lines after contacting the internal STUN server? 3) Is the kanailio STUN server prefered to other STUN servers, for instance stun.stunprotocol.org? Thanks Hermann

2 1

Problem using ds_is_from_list in failure_route
by Joel Serrano | VOZELIA 21 Sep '16

21 Sep '16

Hi all, I'm facing a strange problem using ds_is_from_list in the failure_route block. I have 4 servers in a dispatcher group 8201. Scenario: A call comes in, gets routed to a backend server from 8201 dispatcher group, the backend replies with a 480. Then we have: onreply_route[MANAGE_REPLY] { [...] if (ds_is_from_list("8201")) && t_check_status("480") { <<<<<< This gets executed, because the node is in 8201 and the reply was a 480 if (is_present_hf("X-UserID")) { $var(UserId) = $hdr(X-UserID); } } [...] } So far so good, next is: failure_route[MANAGE_FAILURE] { [...] if (ds_is_from_list("8201")) && (t_check_status("480")) { <<<<<< This does NOT get executed. append_hf("X-UserID: $var(UserId)\r\n"); if (!ds_select_domain("8205","4")) { xlog("L_ERR", "[$ci] - No additional gateways\n"); t_reply("502","Bad Gateway"); exit; } t_set_fr(0,2000); route(RELAY); } [...] } To find the problem, I added some logging in the failure_route before entering the IF statement: if (ds_is_from_list("8201")) xlog("L_NOTICE", "DS is in group 8201"); <<<<< No log, so did NOT match. if (t_check_status("480")) xlog("L_NOTICE", "Status is 480"); <<<<< Yes log, so DID match. According to the docs, ds_is_from_list can be used in any route block, so I think I am definitely doing something wrong... or maybe it's a bug?? The idea is to achieve this: Call comes in from softphone into proxy, proxy sends it to backend, if backend replies with a 480, send it to another dispatcher set (8205). If the 480 comes from somewhere that is not the backend (8201), then do nothing. Any suggestions? Thanks in advanced. Best regards, Joel. Este mensaje y, en su caso, los ficheros anexos son confidenciales, especialmente en lo que respecta a los datos personales, y se dirigen exclusivamente al destinatario referenciado.Les informamos que los datos contenidos en el presente mail, han sido facilitados por usted o recogidos de Fuentes Accesibles al Público. Dicha información personal, será incluida en un fichero bajo la responsabilidad de VOZELIA TELECOM S.L.Todos los ficheros que trata nuestra empresa se encuentran debidamente inscritos ante la Agencia Española de Protección de Datos.Vd. Como propio interesado podrá ejercitar sus derechos de Acceso, Cancelación, Rectificación u Oposición, en el mail: administracion(a)vozelia.com o en la dirección Avenida de Manoteras 8 escalera 3 2ºB, 28050 Madrid.Tal y como establece la Ley Orgánica de Protección de Datos 15/1999 de 13 de Diciembre.Para ejercer sus derechos desde Panama podrá hacerlo en la dirección Vía Argentina, Edificio Mediteranean Loft. Panama.En caso de no ser el destinatario y haya recibido este mensaje por error, agradeceremos que nos lo comunique inmediatamente al remitente sin difundir, almacenar o copiar su contenido.La divulgación o el suministro, en todo o en parte, a cualquier tercero, no podrá ser realizada sin el previo, expreso y escrito consentimiento de VOZELIA TELECOM S.L. .

2 3

Error 2002 (HY000) creating database kamailio
by Diogenes Marcano 21 Sep '16

21 Sep '16

Iam new in kamailio. When I try to create the data base with kamdbctl y have the following error root@diogenes-Inspiron-1525:/usr/local/sbin# kamdbctl create MySQL password for root: INFO: test server charset ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory") ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory") Usage: grep [OPTION]... PATTERN [FILE]... Try 'grep --help' for more information. /usr/local/lib/kamailio//kamctl/kamdbctl.mysql: line 111: [: =: unary operator expected INFO: creating database kamailio ... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory") ERROR: Creating database kamailio failed! root@diogenes-Inspiron-1525:/usr/local/sbin# mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2 "No such file or directory") Thank you for your hrlp Diogenes Marcano

2 1

parameter not found in module dialog
by Michael Jepson 21 Sep '16

21 Sep '16

Hi all, I am trying to limit concurrent calls, using dialog, or rather, I want to try it. I have now only added loadmodule "dialog.so" and a series of modparam commands to my config file and already I am running into problems: ERROR: <core> [modparam.c:139]: set_mod_param_regex(): parameter <toroute_column> of type <1> not found in module <dialog> It fails on the last modparam line, but if I remove it (by commenting it), it fails on whatever the latest modparam line is after that. I have tried removing multiple calls, but every time it fails on whatever is the last line. I have the required modules already loaded (tm.so, rr.so and pv.so), so that's not it I guess. Any idea what might be causing this issue? Also, I noticed (when calling locate dialog.so on the Linux machine) that there is also an ims_dialog.so, if I replace dialog with ims_dialog, I run into the exact same issues. Any help is greatly appreciated! Best regards, Michael Jepson CM Telecom

2 1

← Newer
1
...
4
5
6
7
8
9
10
...
13
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2016