sr-users October 2017

sr-users@lists.kamailio.org

78 participants
108 discussions

MoS(QoS) measurement in Kamailio based IMS network
by Kranti Kumar 23 Oct '17

23 Oct '17

Hi All, I am using Kamailio IMS VMimage which is provided by Franz. I am successfully established the call between the IMS clients. Here I would like to measure the MoS mean opnion score (QoS) of Calls (Voice quality). Can any one suggest me / guide me how to measure the same in this IMS network. Thank you so much in advance. Regards, -kranti

2 1

how to bridge two landline users
by 赵国杰 23 Oct '17

23 Oct '17

Hello, In a standard sip flow, the call goes like: sip user A --> kamailio --> pstn --> landline user B. However, when user A has a bad internet access, the audio is broken. So what I want is to let sip user A send a invite to kamailio first, then kamailio send invite to user A and B's landline number through pstn, then bridge the two call together. I understand this can be achieved by using FREESWITCH originate and bridge command. I've tried but there's no audio both ways, which really makes me feel stupid of myself. So I'm wondering if this can be done with kamailio? If so, how? Thanks Jesse

2 1

uac_replace_from and header adulterations
by Alex Balashov 23 Oct '17

23 Oct '17

Hello, I've got a bizarre problem caused by bad UA behaviour: UA A ---> Kamailio (P) ---> UA B 1. UA A sends initial INVITE through P to B; 2. Kamailio (P) makes some modifications to the From header using uac_replace_from() and passes along to B. 3. B sends an in-dialog request (e.g. BYE or reinvite) to A through P; in doing so, it modifies the To (formerly From) value slightly, replacing the hostname portion in the To URI with a different value to the one that was received in the From header. 4. Kamailio relays this in-dialog request to A, but with an adulterated/clipped/truncated/grammatically invalid To header now. 5. A responds with 400 Bad Request due to invalid To header. I would not dispute that UA B should not be modifying the remote URI in this manner. But since it does, it gives rise to two questions: 1. Why does Kamailio not simply discard the modified To header and restore the original value stored in the Record-Route rider parameter? Is it because the Record-Route parameter does not contain the original header value, but rather some data complementary to the current header value? Or is it because the UAC code takes a checksum of the original remote URI header value and stores it, and just checks it when restoring on principle? If so, what's the motive for that? 2. Wouldn't it be better behaviour to simply reject a request so malformed, rather than passing it on with a corrupt restored value? If Kamailio can detect that the header has been tampered with, why pass it on? -- Alex -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

2 3

Help on Video Conference
by Kranti Kumar 23 Oct '17

23 Oct '17

Hello , I’m trying to build a testbed using the VMware image you kindly have shared here: https://www.kamailio.org/w/2016/02/kamailio-ims-getting-started-box/ My configuration details: HSS - 10.0.0.9 (./hss.sh) PCSCF - 10.0.0.10 (kamailio -f /usr/local/etc/kamailio/kamailio-pcscf.cfg) ICSCF - 10.0.0.11(kamailio -f /usr/local/etc/kamailio/kamailio-icscf.cfg) SCSCF - 10.0.0.12 (kamailio -f /usr/local/etc/kamailio/kamailio-scscf.cfg) host machine: 10.0.0.5 I am able to register mobile clients ( IMSdroid) and make voice/video calls between them successfully. Now I would like to make a conference call among 3 IMSdroid users but its failing. Could you please suggest me the way forward here. I am thinking to integrate Application server (AS) to enable Video Conferences. Could you please guide me how to enable AS in this VM image and configuration details. Is there any possibility to do Video conference using this current setup(VM image). Could you please suggest me. Thank you so much in advance. Regards, -kranti

2 1

Kamailio IMS deployment
by Ramya Y 22 Oct '17

22 Oct '17

Hi, I am newbie to kamailio world and we would like to deploy Kamailio based IMS platform. Can any body share the link or Step by step procedure(user Guide) to deploy Kamailio IMS. Regards, Ramya

5 22

call_id in dialog module
by ‪mahsa _a_‬ ‪ 20 Oct '17

20 Oct '17

hi all;i want to write "billing" project with kamailio,i using python,postgresql, dialog module and falcon.my problem is in "call_id" section.my code(this section) is in python : """... if (method == 'INVITE'): callid = req.get_param_as_list("call_id") print(req.get_param_as_list("Ts")) print("call id = %s " % callid) elif (method == 'ACK'): time_req = int(req.get_param_as_list("Ts")[0]) callid = req.get_param_as_list("call_id")[0] print("user %s call to %s at time %d % (from_user,to_user,time_req))... """ and in kamailio.cfg: """http_query("http://127.0.0.1:5000/test?method=$rm& call_id=$dlg(callid)&Ts=$Ts&fu=$fu&tu=$tu","$var(result)"); """" "callid" in ACK is ok but "callid' in invite is "null", where is my problem? thanks.

2 1

Retransmission handling
by Volkan Oransoy 19 Oct '17

19 Oct '17

Hi all, I wonder purpose of this block in default script. What I didn’t understand is the purpose of "t_check_trans()”. Accoording to documentation, this method returns a boolean. So why do we use it even we don’t check output? # handle retransmissions if (!is_method("ACK")) { if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); } /Volkan

3 3

VoLTE Capable LTE Handsets which support IMS uisng IPv4
by Ron 19 Oct '17

19 Oct '17

I would like to support VoLTE using an IPv4 IMS network rather than IPv6 network. The handsets that I have been trying insist on the IMS network support either IPv6 or IPv4v6 dual stack. After giving them IPv4v6 connectivity, I am finding that even though the handsets asked for both IPv4 and IPv6 P-CSCFs, they only try the IPv6 proxy (if only the IPv4 proxy is provided, they will not try at all). I am wondering of anyone has worked with any LTE handsets which are willing to support IMS using IPv4 only. Thanks, Ron

3 2

Kamailio and FreeSwitch integration
by Timothy oladapo olawuyi 19 Oct '17

19 Oct '17

Dear All, I am a new entrant in Kamailio though little understanding of SIP and FreeSwitch soft switch, however, I have a project to integrate Kamailio and Freeswitch. Here is the scenario of what I want to implement; Kamailio will act as our SIP control while Freeswitch will act media server for incoming calls. Freeswitch will send all outgoing calls to Kamailio for onward transfer to our SIP provider network. No registration, presence, location Accounting, Authentication etc. are required. I have gone through the book SIP ROUTING WITH KAMAILIO and FreeSwitch and Kamailio integration sample config available at http://kb.asipto.com/freeswitch:kamailio-3.0.x-freeswitch-1.0.6d-ms am still unable to figure out how to go with the configuration. I will appreciate any one who can provide guideline for achieving the above scenario. Regards Olawuyi Timothy Oladapo | IT/VAS Operation | Information System Dept |Pethahiah Rehoboth INTL. Limited | 2nd Floor Rubby Block All seasons Plaza , Lateef Jakande Rd, Agidingbi, Ikeja, Lagos. | Mobile: +2348052612001,+2348098797928 |Skype: daptims | <htttp://www.pethahiah.com/> htttp://www.pethahiah.com

3 4

port forwarding
by Andrzej Kaczmarczyk 19 Oct '17

19 Oct '17

Hello, This is probably trivial, but I'm quite new in kamailio and trying to handle it for my personal purposes (so - no trainings, no support etc :) ) - for few (up to 20) users and rare connections, more to learn something than to have production system. No plans to go outside my own server. I have LAN. One of machines in this LAN is server with kamailio onboard. It works, but only with local hostname (user@hostname). Now I want to go outside (with clients). As temporarty solution I have only dynamic DNS (no-ip.org) and I didn't expect it working. But tried with IP adress (user(a)WAN.IP.ADD.RESS). And... I don't know which ports to redirect on router. Now there are redirected 5060 and 10000-30000 (maybe it is not necessary but first I want it working) - taken from some on-line info. I can: - log in to all my accounts, - depends on client - call to another user and in some cases I can receive the call (so it is probably issue on my clients, because it is possible to make a call at all). But I cannot transmit any data: connections are completely silent in any case and I cannot start video - although cameras are findable. Which ports in fact are necessary? I want audio and video communication, presence info and probably nothing more. Which ports should I redirect? -- Pozdrawiam Andrzej Kaczmarczyk

2 1

← Newer
1
2
3
4
5
6
7
8
9
10
11
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2017