sr-users March 2018

sr-users@lists.kamailio.org

101 participants
132 discussions

Need useful graphics ideas
by Karsten Horsmann 16 Mar '18

16 Mar '18

Hello List, I thought about some kind of Kamailio stats source (like registered users, calls active and some other things) to collect them into influx dB and draw them with grafana. How do you solved that? Timer based routes or statsd or whatever? Kind regards Karsten Horsmann

5 10

Lua script reload
by Igor Olhovskiy 16 Mar '18

16 Mar '18

Hi! I’m playing with new KEMI framework and trying to reload script without reloading Kamailio. Lua code is mostly one from example. ... modparam("app_lua", "load", "/etc/kamailio/lua/kamailio.lua") cfgengine "lua" ... So, I’m changing lua code and giving command kamctl rpc app_lua.reload But in the answer { "jsonrpc": "2.0", "error": { "code": -32000, "message": "Execution Error" }, "id": 11098 } In syslog there is a string /usr/sbin/kamailio[10939]: ERROR: app_lua [app_lua_api.c:399]: lua_sr_reload_script(): reload is not activated What is need to be done to activate reload? Regards, Igor

2 12

logging sip messages
by Karthik Srinivasan 15 Mar '18

15 Mar '18

Hello: I am trying to find a simple way to log each and every SIP message that Kamailio receives or Kamailio sends. In a nutshell, here is what i'm trying to accomplish: - log sip message received; log ip address and port of where message was received from - log sip message to be sent or sent; log ip address and port of destination. I am trying to achieve this in the context of my general log file that contains routing/event logic from the kamailio.cfg file. By this i mean i don't want to have to run an external program like tcpdump to capture the packets and log them. I have tried a few thing but haven't been able to capture all conditions. examples: i have included things like event_routes for [tm:local-response]; [sl:local-response]; [sl:filtered-ack], onreply_route... I can capture most replies and responses via those but am not able to capture a 200ok relayed response from Kamailio back to the originating UA for example. I can log incoming messages without problem. I have also tried to activate IO interrupt to route to event_route[NETWORK:MSG] but unfortunately i can't access the source/dest ip address/port info or other pseudo variables. So back to the original question: How does one log every SIP message that Kamailio gets? How does one log every SIP message that Kamailio sends? via the context of the routing/replies/event routes in kamailio.cfg. Thanks, Karthik

3 3

UAC Restore Mode
by Duarte Rocha 15 Mar '18

15 Mar '18

Greetings, I have a question about the UAC module and its restore mode. If i use the "auto" restore mode in the "restore_mode" parameter will the entire info be saved in the From Tag for restore? I'm asking because i will implement High Avaliability and need to know if in event of a failure and i switch to a kamailio in a different machine i will be able to do the To\From restore. Thanks in advance, Duarte Rocha

1 0

Kamailio Edge Proxy & Kamailio Core Sip Server behind NAT
by Ed 14 Mar '18

14 Mar '18

Hi all, I would like to thank you all for the work you are doing. Having a Kamailio Edge proxy (2 interfaces - 1 pvt, 1 public) & Kamailio Core Sip server behind NAT, is it necessary to set up rtpengine on both servers? Thanks, Ed

2 1

kamailio implamentation
by kossivi HOLONOU 14 Mar '18

14 Mar '18

Hello, I am developing a project on MSRP Kamailio with webRTC client for my end of training project, can you help me with documentation or configuration side kamailio and webRTC client to implement to get there? Thank you for your support BesT Regards,Kossivi HolonouBO VAS EngineerDakar-Sénégal

1 0

Dimensioning ds_hash_size value for dispatcher module
by Alvaro Araos 14 Mar '18

14 Mar '18

Hi, In the documentation of the dispatcher module it is said that in order to use the algorithm 10 (load balancing) the parameter ds_hash_size must be set, in the definition it is said that the value is in powers of 2, that is to say if it is set to 8, this is equal to 2 ^ 8 = 256 slots, but still I do not understand how to dimension this value for my needs. I do not know whether to put 8, 4, 9, etc. Saludos, ALVARO ARAOS MÉNDEZ Director de Tecnología en FONOIP +56 2 2947 9000 alvaro(a)fonoip.com | www.fonoip.com [1] Moisés Chacón 46, El Monte, RM Links: ------ [1] http://www.fonoip.com

2 2

Kamailio With SMPP
by Amar Tinawi 14 Mar '18

14 Mar '18

Hello Is there a method to integrate kamailio to an smpp smsc ? Thanks

2 1

kamailio Rx_AAR qusetions
by Lv, Victor (NSB - CN/Qingdao) 14 Mar '18

14 Mar '18

Hi All, I am trying to send two Rx_AAR after Kamailio receive 200 OK with SDP: The first one for termination part is worked well, but in MT_aar_reply route block, it's not works. The one I marked with red color, is there anyone know how configure Kamailio to send two Rx_AAR after receive 200 OK SDP? Thanks a lot!! Victor +++++++++++++++++++++++++++++++++++++++++++++++++++++++ if (t_check_status("200")){ xlog("L_DBG", "IMS: Received 200 nside orig_initial_reply\n"); $var(aarret) = Rx_AAR("MT_aar_reply", "term","",2); xlog("L_DBG", "AAR return code is $var(aarret)\n"); } on MT_aar_reply block: route[MT_aar_reply] { #this is async so to know status we have to check the reply avp switch ($avp(s:aar_return_code)) { case 1: xlog("L_DBG", "Diameter: Term AAR success on media authorization\n"); break; default: xlog("L_ERR", "IMS: AAR failed Term\n"); xlog("L_ERR", "IMS: ttag: "+ "$avp(TTAG_CUSTOM_AVP)"); xlog("L_ERR", "IMS: ftag: "+ "$avp(FTAG_CUSTOM_AVP)"); xlog("L_ERR", "IMS: callid: "+ "$avp(CALLID_CUSTOM_AVP)"); #comment this if you want to allow even if Rx fails if(dlg_get("$avp(CALLID_CUSTOM_AVP)","$avp(FTAG_CUSTOM_AVP)","$avp(TTAG_CUSTOM_AVP)")){ dlg_terminate("all", "Sorry no QoS available"); exit; } $var(aarret) = Rx_AAR("MO_aar_reply", "term","",2); xlog("L_DBG", "AAR return code is $var(aarret)\n");

4 8

kamailio does not start with db_mongdb and usrloc
by Stephane Focant 13 Mar '18

13 Mar '18

Hello, I have an issue when I try to use kamailio 5.1 with usrloc and db_mongdb modules. When I try to start kamailio, I get the following error: 0(22216) DEBUG: <core> [db.c:314]: db_do_init2(): connection 0x7f735b5c4100 not found in pool 0(22216) DEBUG: db_mongodb [mongodb_connection.c:55]: db_mongodb_new_connection(): connection open to: mongodb://10.0.12.149 ,10.0.12.150, 10.0.12.151/kamailio?replicaSet=sre_location&slaveOk=true&readPreference=primaryPreferred 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:864]: db_mongodb_query(): query to collection [version] 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:898]: db_mongodb_query(): query filter: { "table_name" : "location" } 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:917]: db_mongodb_query(): columns filter: { "table_version" : 1 } 0(22216) DEBUG: <core> [db_res.c:120]: db_new_result(): allocate 56 bytes for result set at 0x7f735b5c4450 0(22216) DEBUG: db_mongodb [mongodb_dbase.c:746]: db_mongodb_store_result(): no result from mongodb 0(22216) DEBUG: <core> [db.c:404]: db_table_version(): no row for table location found 0(22216) ERROR: <core> [db.c:450]: db_check_table_version(): invalid version 0 for table location found, expected 9 (check table structure and table "version") 0(22216) ERROR: usrloc [dlist.c:659]: register_udomain(): error during table version check. 0(22216) DEBUG: <core> [db_pool.c:100]: pool_remove(): removing connection from the pool 0(22216) ERROR: registrar [registrar.c:651]: domain_fixup(): failed to register domain 0(22216) ERROR: <core> [core/route.c:1154]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/kamailio-5.1/etc/kamailio/kamailio.cfg:660 0(22216) ERROR: <core> [core/rvalue.c:3860]: fix_rval_expr(): failure in cfg at line: 660 col: 22 0(22216) ERROR: <core> [core/rvalue.c:3860]: fix_rval_expr(): failure in cfg at line: 660 col: 22 0(22216) ERROR: <core> [core/route.c:1154]: fix_actions(): fixing failed (code=-1) at cfg:/usr/local/kamailio-5.1/etc/kamailio/kamailio.cfg:663 ERROR: error -1 while trying to fix configuration 0(22216) DEBUG: tm [t_funcs.c:85]: tm_shutdown(): start 0(22216) DEBUG: tm [t_funcs.c:88]: tm_shutdown(): emptying hash table 0(22216) DEBUG: tm [t_funcs.c:90]: tm_shutdown(): removing semaphores 0(22216) DEBUG: tm [t_funcs.c:92]: tm_shutdown(): destroying tmcb lists 0(22216) DEBUG: tm [t_funcs.c:95]: tm_shutdown(): done 0(22216) INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized 0(22216) DEBUG: <core> [core/mem/shm.c:261]: shm_destroy_manager(): destroying memory manager: q_malloc 0(22216) DEBUG: <core> [core/mem/q_malloc.c:1165]: qm_shm_lock_destroy(): destroying the shared memory lock 0(22216) DEBUG: <core> [core/mem/pkg.c:91]: pkg_destroy_manager(): destroying memory manager: q_malloc In mongoDB, I have the collection "version" in the db kamailio, and the entries needed for usrloc (location and location_attrs): sre_location:PRIMARY> use kamailio switched to db kamailio sre_location:PRIMARY> db.getCollection("version").find() { "_id" : ObjectId("5a8ec43c601b262bef82a595"), "table_name" : "location", "table_version" : 9 } { "_id" : ObjectId("5a8edb72a3ec40427577b8d0"), "table_name" : "location_attrs", "table_version" : 1 } And logs in mongo show the following info when kamailio starts: 2018-02-22T17:13:02.604+0100 I NETWORK [conn90] received client metadata from 10.0.12.180:56320 conn: { driver: { name: "mongoc", version: "1.9.2" }, os: { type: "Linux", name: "CentOS", version: "6.9 (Final)", architecture: "x86_64" }, platform: "cfg=0x1563000 posix=200809 CC=GCC 4.4.7 20120313 (Red Hat 4.4.7-18) CFLAGS="" LDFLAGS=""" } 2018-02-22T17:13:02.604+0100 I COMMAND [conn90] command admin.$cmd command: isMaster { isMaster: 1, client: { driver: { name: "mongoc", version: "1.9.2" }, os: { type: "Linux", name: "CentOS", version: "6.9 (Final)", architecture: "x86_64" }, platform: "cfg=0x1563000 posix=200809 CC=GCC 4.4.7 20120313 (Red Hat 4.4.7-18) CFLAGS="" LDFLAGS=""" }, compression: [], $readPreference: { mode: "secondaryPreferred" }, $db: "admin" } numYields:0 reslen:716 locks:{} protocol:op_query 0ms 2018-02-22T17:13:02.604+0100 I COMMAND [conn90] command kamailio.$cmd command: find { find: "version", filter: { table_name: "location" }, table_version: 1, $db: "kamailio", $readPreference: { mode: "primaryPreferred" }, $clusterTime: { clusterTime: Timestamp(1519315979, 1), signature: { hash: BinData(0, 0000000000000000000000000000000000000000), keyId: 0 } } } numYields:0 reslen:531 locks:{} protocol:op_msg 0ms 2018-02-22T17:13:02.605+0100 I NETWORK [conn90] end connection 10.0.12.180:56320 (9 connections now open) I probably miss something: it is not clear to me why kamailio is not able to retrieve the value of table_version for the table_name location. Any idea would be very welcome ! I use mongo-c-driver 1.9.2 and mongodb 3.6 Thank you. Stephane

3 14

← Newer
1
...
6
7
8
9
10
11
12
13
14
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2018