sr-users September 2018

sr-users@lists.kamailio.org

72 participants
123 discussions

Via header force change protocol to TLS?

by Anthony Alba

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

5 months, 3 weeks

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK

by Daniel Tryba

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

1 year, 6 months

Re: [SR-Users] t_drop_replies not working with t_suspend in failure route

by Huber Andreas

Hi, We’re still using kamailio 4.4 but we’ll be migrating to 5.0 soon. Cool so it will be fixed when we migrate ! Thanks, Andreas From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Federico Cabiddu Sent: vendredi 12 mai 2017 11:56 To: Kamailio (SER) - Users Mailing List Subject: Re: [SR-Users] t_drop_replies not working with t_suspend in failure route Hi, which version are you using? A similar case had been reported some months ago and it should be fixed in 5.0. Regards, Federico On Fri, May 12, 2017 at 11:44 AM, Huber Andreas <andreas.huber(a)nagra.com<mailto:andreas.huber@nagra.com>> wrote: Hello, We have a use case where we suspend a transaction in a failure_route to give UEs that might be woken by a push notification more time to REGISTER and join the INVITE. We’d like to drop the previous branches in this case. I tried using t_drop_replies() but it has no effect. The doc states that t_drop_replies() is only working if a new branch is added. And from my understanding t_suspend() adds a new branch. But is it possible that t_drop_replies() cannot be used with t_suspend()? Or am I missing something? Kind Regards, Andreas _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

3 years, 2 months

nat_uac_test(8)

by Sergiu Pojoga

When receiving an INVITE over a specific LTE carrier, I'm seeing 'c=IN IP4 192.0.0.4' in SDP, which isn't technically a RFC1918 or RFC6598 IP address and thus nat_uac_test(8) fails. What elegant workaround can be done to catch such specific cases? Thanks.

4 years, 7 months

need help with RTPProxy in bridged mode

by Grant Bagdasarian

Hello, I'm using RTPproxy for the first time in bridged mode and I can't get kamailio/rtpproxy to rewrite the c parameter to the correct public ip address of kamailio. The setup is as following: Carrier ------[fiber]------ Kamailio ---------[lan]--------- Freeswitch Kamailio is listening on two interfaces: 1) Private: 172.0.0.1 2) Public: 192.168.0.1 (since we have a dedicated fiber with our carrier, this is its public address) Freeswitch is listening on: 1) 172.0.0.2 Carrier is on: 1) 10.0.0.1 I've started an rtpproxy instance on the Kamailio box using: rtpproxy -s udp:127.0.0.1:7721 -u rtpproxy rtpproxy -p /var/run/rtpproxy/rtpproxy.pid -l 192.168.0.1 172.0.0.1 I've played around with rtpproxy_manage() and the various flags (ie, ei), but I can't get kamailio to set the correct public IP when the 200 OK has to be sent back to the carrier. It always sets it to its private address, instead of its public address. I'm using Kamailio 4.2 with sippy/rtpproxy 2.0. Could someone please point me into the right direction? Thanks! Grant

4 years, 7 months

rtpproxy does not response, disable it

by Zodiac

Dear friends, I am working on a program on Kamailio and rtpengine proxy. I am wondering whether can I set Kamailio and rtpengine daemon on different physical machines. For example, I set Kamailio on a machine with IP address:10.109.247.80, and launch rtpengine daemon on another machine with interface parameter as 10.109.247.90 and ng port 7723. I set parameter in Kamailio.cfg with modparam(“rtpengine”, “rtpengine_sock”, “udp:10.109.247.90:7723”). Unfortunately I got debug message like this: ERROR: rtpengine [rtpengine.c:1710]: send_rtpp_command(): can't send command to a RTP proxy ERROR: rtpengine [rtpengine.c:1746]: send_rtpp_command(): proxy <udp:10.109.247.90:7723> does not respond, disable it ERROR: rtpengine [rtpengine.c:1616]: rtpp_test(): proxy did not respond to ping And, I also tried to set Kamailio and rtpengine daemon in a same machine,and use modparam(“rtpengine”, “rtpengine_sock”, “udp:localhost:7723”). And Kamailio can work functionally under this situation. rtpengine daemon can receive ping message from Kamailio and rtpengine daemon can work as suspected. So for the later case, is it supposed that Kamailio be in the same machine with same localhost address? Otherwise, what’s the reason for my ERROR? ------------------------------------ 北京邮电大学网络技术研究院网络与交换技术国家重点实验室田军 +86 18810315790 mozillafire(a)bupt.edu.cn ------------------------------------

4 years, 10 months

MWI notification through pua.publish

by willy

Hello. Have anyone tried to use pua.publish to send MWI notification? Can it work at all? I'm sending request through jsonrpc server, but it is not dispatched by handle_publish. Thank you, Kirill

5 years, 10 months

kamailio rabbitmq segfault

by Sylvain Boily

Hello, I tried to test the rabbitmq module in kamailio with the debian 9 repo from kamailio.org but there is a segfault when the service is launched. Is there is people also have this issue? /etc/init.d/kamailio restart [....] Restarting kamailio (via systemctl): kamailio.serviceJun 9 13:02:03 siprouter kamailio: DEBUG: <core> [core/cfg.y:1659]: yyparse(): loading module rabbitmq.so Jun 9 13:02:03 siprouter kamailio: DEBUG: <core> [core/sr_module.c:575]: load_module(): trying to load </usr/lib/x86_64-linux-gnu/kamailio/modules/rabbitmq.so> Jun 9 13:02:03 siprouter kamailio: DEBUG: <core> [core/kemi.c:1295]: sr_kemi_modules_add(): adding module: rabbitmq Jun 9 13:02:03 siprouter kamailio: DEBUG: <core> [core/cfg.lex:1737]: pp_define(): defining id: MOD_rabbitmq Jun 9 13:02:03 siprouter kernel: [159315.610811] kamailio[13226]: segfault at 7f03b2296287 ip 00007f03b2080ca3 sp 00007fff133285c0 error 7 in librabbitmq.so.4.2.0[7f03b2074000+13000] Jun 9 13:02:03 siprouter /usr/sbin/kamailio[13226]: DEBUG: <core> [core/sr_module.c:988]: init_mod(): rabbitmq Sylvain

5 years, 10 months

RTPengine: shouldn't SDP <sess-version> be incremented when SDP is updated in-dialog?

by George Diamantopoulos

Hello all, I have the following issue (I think) with RTP engine. An INVITE comes in, and rtpengine will rewrite the SDP accordingly, as configured in kamailio.cfg. After some time a reINVITE is sent out in the opposite direction, for session refresh purposes. As I use rtcp-mux-offer in kamailio.cfg for this direction, RTPengine will inject the rtcp-mux parameter, and this reINVITE is forwarded to the UAC that sent the original INVITE. However, the SDP in the reINVITE is exactly the same as the SDP in the 200 OK to the original INVITE, with the exception of the rtcp-mux parameter. Since the SDP offered from the same end has changed, shouldn't session version be incremented as well? Does this sound like something that should be reported as a bug to rtpengine? Or am I missing something here? Thanks! Best regards, George Diamantopoulos

6 years

siptrace module doesn't close db connections

by Roman Dissauer

Hi, it seems that siptrace module doesn’t close db connections. I’m on Kamailio 5.1.4 from official debian stretch repository with postgresql db module enabled. siptrace config: modparam("siptrace", "db_url", DBURL) modparam("siptrace", "duplicate_uri", "sip:193.32.51.189:9060") modparam("siptrace", "hep_mode_on", 1) modparam("siptrace", "hep_version", 3) modparam("siptrace", "hep_capture_id", 1001) modparam("siptrace", "trace_mode", 1) Here you can see the open connections from the kamailio host: # select client_addr, state, query from pg_stat_activity where client_addr = '10.23.101.61'; client_addr | state | query --------------+-------+---------------------------------------------------------------- 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' 10.23.101.61 | idle | select table_version from version where table_name='sip_trace' (31 Zeilen) another example, other installation with same kamailio version 5.1.4: # select client_addr, state, query from pg_stat_activity where client_addr = '10.23.102.1'; client_addr | state | query -------------+-------+---------------------------------------------------------------- 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' 10.23.102.1 | idle | select table_version from version where table_name='sip_trace' (39 Zeilen) Thanks Roman

6 years

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2018