sr-users September 2020

sr-users@lists.kamailio.org

84 participants
107 discussions

Called with SDP without DTLS fingerprint from WebRTC to SIP

by Benjamin Flügel | vio:networks

Hey guys and girls, I'm trying to configure Kamailio so that I can communicate over it using WebRTC and SIP. Client 1 is a softphone based on SIPJS. Client 2 is a Yealink phone. Both are registered with the Kamailio. Behind the Kamailio there is another Asterisk. The Kamailio acts as a proxy here. So far everything works. Only if I accept the call, which is made from Client 1 to Client 2 or vice versa, then I get this error in Client 1: Called with SDP without DTLS fingerprint. I can see that the fingerprint is present in the INVITE from Client 1 to Client 2. However, it is missing in the OK. The lower part contains my NATMANAGE config. This could probably be optimized a lot, but for now it should work. Unfortunately I have only recently started with Kamailio. I hope you can help me there. I can also send you the SIP-Log if you want to. Many thanks in advance. Greetings Benny route[NATMANAGE] { if (is_request()) { if(has_totag()) { if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (check_route_param("rtp=bridge")) { setbflag(FLB_BRIDGE); } if (check_route_param("rtp=ws")) { setbflag(FLB_RTPWS); } } } if (!isbflagset(FLB_BRIDGE)) { return; } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB) || isbflagset(FLB_RTPWS))) { return; } $xavp(r=>$T_branch_idx) = "replace-origin replace-session-connection"; if (!nat_uac_test("8")) { xlog("IS TRUSTED"); $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " trust-address"; } if (is_request()) { if (!has_totag()) { if (!t_is_failure_route()) { $avp(extra_id) = @via[1].branch + $T_branch_idx; $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " via-branch=extra"; xlog("BRANCH: $T_branch_idx"); } } } if (is_reply()) { $avp(extra_id) = @via[2].branch + $T_branch_idx; $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " via-branch=extra"; xlog("BRANCH: $T_branch_idx"); } if(isbflagset(FLB_RTPWS)){ xlog("IS WS"); if(is_request()){ xlog("IS REQUEST"); if ($proto =~ "ws") { xlog("WEB --> SIP"); $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-demux DTLS=off SDES-off ICE=remove RTP/AVP"; rtpengine_manage($xavp(r=>$T_branch_idx)); if (route(FROMASTERISK)) { xlog("FROM INTERNAL"); } else { xlog("FROM EXTERNAL"); rtpengine_manage(" direction=external direction=internal ICE=remove loop-protect"); } } else { xlog("SIP --> WEB"); $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-offer generate-mid DTLS=passive SDES-off ICE=force RTP/SAVPF direction=internal direction=external loop-protect"; } } else { xlog("IS RESPONSE"); if ($proto =~ "ws") { xlog("WEB --> SIP"); $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-demux DTLS=off SDES-off ICE=remove RTP/AVP direction=external direction=internal loop-protect"; } else { xlog("SIP --> WEB"); $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-offer generate-mid DTLS=passive SDES-off ICE=force RTP/SAVPF direction=internal direction=external loop-protect"; } rtpengine_manage($xavp(r=>$T_branch_idx)); } } else { xlog("SIP --> SIP"); if (route(FROMASTERISK)) { xlog("FROM INTERNAL"); rtpengine_manage(" direction=internal direction=external ICE=remove loop-protect"); } else { xlog("FROM EXTERNAL"); rtpengine_manage(" direction=external direction=internal ICE=remove loop-protect"); } } xlog("NATMANAGE branch_id:$T_branch_idx ruri: $ru, method:$rm, status:$rs, extra_id: $avp(extra_id), rtpengine_manage: $xavp(r=>$T_branch_idx)\n"); if (is_request()) { if (!has_totag()) { if (t_is_branch_route()) { if (isbflagset(FLB_NATB)) { add_rr_param(";nat=yes"); } if (isbflagset(FLB_BRIDGE)) { add_rr_param(";rtp=bridge"); } if (isbflagset(FLB_RTPWS)) { add_rr_param(";rtp=ws"); } } } } if (is_reply()) { if (isbflagset(FLB_NATB)) { if (is_first_hop()) { if (af == INET) { set_contact_alias(); } } } } return; }

4 years, 1 month

UAC module supports registration with Remote registrar using WSS ?

by sagar malam

Hello , I want to use UAC module to register with a remote registrar using WSS. Does it support it ? https://kamailio.org/docs/modules/5.3.x/modules/uac.html#idm614 -- Thanks, Sagar

4 years, 1 month

Installing Diameter server module (IMS_DIAMETER_SERVER)

by Pavithra Mohanraja

Hi, How to install Diameter server module (IMS_DIAMETER_SERVER) using apt-get package. I need to have DRA in my application. Can anybody please help on this on how to install and how to use it. Kindly help. Thanks, Pavithra

4 years, 1 month

Topos_redis and loose_route

by Ernest Mavrel

Dear Community, Call scenario: Calling number 33825462354 Called number 44656646820 UAC (IP=1.1.1.1) => Kamailio (IP=2.2.2.2) => SIP proxy (IP=3.3.3.3) I stocked on strange issue with module TOPOS_REDIS and PRACK message (IP=2.2.2.2 kamailio version 5.2.3). Configuration with module TOPOS works, but because of a lot of calls we would like to use TOPOS_REDIS (avoid mysql). I already check this: https://lists.kamailio.org/pipermail/sr-users/2018-May/101641.html and I already have fixed version of module. In attach you can find traces (pcap file and kamailio log with debug=4) Your help will be greatly appreciated Kind Regards Ernest Mavrel

4 years, 1 month

Regex in the switch statement

by Ilie Soltanici

Hello, Is there any way to use Regex or 'OR/AND' operators in the switch/case statements? I've tried the following syntax but it's not working, are there any other ways to do this? switch($dlg_var(ISP)) { case "TRUNK1|TRUNK2": } Thank you.

4 years, 1 month

RTPENGINE question

by Andrew Chen

Hey guys, Is this the right place to ask about rtpengine (ngcp) related issues with kernel packet forwarding? Thanks. -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

4 years, 1 month

Kamailio IMS - 5.3.5 with 5g core

by Pavithra Mohanraja

Hi, I am working with kamailio IMS 5.3.5. I am trying to connect kamailio IMS with 5g core. Did anybody come across this scenario. If so, Please help me how Rx interface works with 5g and how UDM and HSS can be an converged application incase of 5g. Kindly help as it is an urgent requirement. Thanks, Pavithra

4 years, 1 month

Kamailio question

by alexandros vlachos

Hello, I am a new user and i am trying to use kamailio as remote sip server for clients (softphones particularly) The error message is "SIP: SIP/2.0 403 Not relaying" The kamailio listens with one public ip address in a datacenter ( linux debian). root@vmdeb1:~# kamctl version /usr/sbin/kamctl 5.2.0 The xlog shows that the register message arrives in kamailio. I am sure that the user 410 exists. I have added the remote public address to address via kamctl. I have added the location via ul add command. I am not sure about kamailio.cfg because most of it except the tls is the default. I would appreciate your help. Alexandros

4 years, 1 month

Is there any way to remove stale registrations before expires time from usrloc ?

by sagar malam

Hello , I am using the usrloc module to store registrations. I could not find any way to remove stale registrations before expires time. Most of the registrations are mobile app so they wont run in background to save battery of phone hence we end up having lots of registrations in usrloc which were not removed because app was killed in background by OS without letting it send unregister request. Is there any way to remove stale registrations before expires time from usrloc ? -- Thanks, Sagar

4 years, 1 month

SRTP-DTLS and rtpengine

by Gholamreza Sabery

Hi, I checked rtpengine's documentation, and I wonder what happens if I use SRTP-DTLS with rtpengine? My connection will be hop by hop encrypted with rtpengine, or like TURN my connection will remain end-to-end encrypted?? Thx a lot

4 years, 1 month

← Newer
1
...
5
6
7
8
9
10
11
Older →

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2020