sr-users February 2021

sr-users@lists.kamailio.org

56 participants
82 discussions

webrtc setup
by Daniel Siemens 25 Feb '21

25 Feb '21

I have an asterisk server on an internal network 10.123.245.18. I have a kamailio server at 10.123.244.193 On this server is nginx coturn & rtpengine. The kamailio also has an elastic IP from AWS When I connect from a raspberry phone app served by nginx The phone reports Registration failed The log entries are START:REGISTER from sip:32897@dnsname (IP:127.0.0.1:38014) What do I need to do to get the registration to happen? In the client side using Raspberry phone is says web socket error. Thanks. ------------------------------------------------------------------ This email is intended solely for the use of the addressee and may contain information that is confidential, proprietary, or both. If you receive this email in error please immediately notify the sender and delete the email. ------------------------------------------------------------------

2 2

Re: [SR-Users] No ACK from MS Teams
by Phillman25 Kyriacou 25 Feb '21

25 Feb '21

Hi Guys Thanks for all your recommendations. I did the change and rr headers only show the fqdn of Kamailio as you can see below in the 200 OK sent back to MS Teams, however still the same issue no ACK. |||||||||||||||||||| ==================== tag: snd pid: 31232 process: 6 time: 1613047849.768857 date: Thu Feb 11 14:50:49 2021 proto: tls ipv4 srcip: 82.102.42.58 srcport: 5061 dstip: 52.114.132.46 dstport: 5061 ~~~~~~~~~~~~~~~~~~~~ SIP/2.0 200 OK Via: SIP/2.0/TLS 52.114.132.46:5061;branch=z9hG4bK4f5c9b66 Record-Route: <sip:sbc.intelligentsupport.eu:5060 ;ftag=dcea3c9546914ff8826afca13260da1c;lr=on> Record-Route: <sip:sbc.intelligentsupport.eu:5061 ;transport=tls;ftag=dcea3c9546914ff8826afca13260da1c;lr=on> Record-Route: <sip:sip-du-a-us.pstnhub.microsoft.com:5061;transport=tls;lr> From: Phillip Kyriacou<sip:+35722010058@sip.pstnhub.microsoft.com:5061 ;user=phone>;tag=dcea3c9546914ff8826afca13260da1c To: <sip:+35796552237@sbc.intelligentsupport.eu:5061 ;user=phone>;tag=as63d965d3 Call-ID: 43f0f0be2fa05b408c81736dbe392aef CSeq: 1 INVITE Server: MediaGW V1.0 Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Session-Expires: 1800;refresher=uas Contact: <sip:+35796552237@82.102.42.52:5060> Content-Type: application/sdp Require: timer Content-Length: 339 v=0 o=root 601931926 601931926 IN IP4 82.102.42.52 s=ASTERISK c=IN IP4 82.102.42.52 t=0 0 m=audio 16360 RTP/SAVP 0 8 101 a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:IyrJsjVV0w5ORJQ3OJB0r8iyRZU+1lMjg4i9vzC2 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=maxptime:150 a=sendrecv |||||||||||||||||||| ====================

6 11

Kamailio 5.4.4 extremely slow carrierroute preloading
by sr.maillists＠gmail.com 24 Feb '21

24 Feb '21

Hi Maillist! Does someone have experience with kamailio 5.4.4 and carrierroutes loading? We have about 50'000 carrierroutes, kamailio 4.3.6 loads them in about 10 seconds. Kamailio 5.4.4 needs about 10 minutes (!) to load the routes if I set the parameter modparam("carrierroute", "fetch_rows", 50000); Withous this parameter, v5.4.4 loads only 2000. - Virtual Machine is an ubuntu 20.04 with all current updates - Kamailio is installed from source - The database is postgres on a separate host I tested this with the same database and same VM, I only recompiled kamailio and made neccessary changes in the kamailio.cfg. In 4.3.6 I disabled the modules tls and jsonrpcs and added the module mi_fifo.so instead. Any Idea where to search? Did I miss something in the update-procedure? Regards Stefan

2 5

logging rd/wr queue usage?
by Andrew Chen 24 Feb '21

24 Feb '21

Hi all, I was wondering if there's a way to log rd/wr queue usage when processing a new incoming message? I am currently running 5.2.5 but couldn't find any variables in core cookbook or psudovar page. Thanks. -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

3 2

regarding the kamailio.cfg
by Maharana, Kanhu Charana 24 Feb '21

24 Feb '21

Hi, We are getting some issue in the in sip registration. The scenario is like. Device SIP registration successful with kamalio. Device got reboot abruptly. When the device got power and switched on, device sent a sip registration again. This time the registration is failing in the kamalio. Is there any way to handle it, if the registration request received for a device which is already registered, kamalio should release the old context and start a fresh registration. Regards kanhu

2 1

Critical : Kamilio is not starting when loading Dispatcher module .
by Amul Tyagi 23 Feb '21

23 Feb '21

Dear Kamailio Team , I have installed Kamailio on Ubuntu 18.04 with SIREMIS and its working fine . But I want to use the Dispatcher module for load balancing . When enabling the dispatcher module Kamailio is not starting up and giving error in syslog. Please check below the logs for your reference. root@CICTPH01LLB01:/usr/lib/x86_64-linux-gnu/kamailio/modules# kamailio -E 0(19009) INFO: <core> [core/sctp_core.c:74]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sctp module Listening on udp: 127.0.0.1:5060 udp: 192.168.180.200:5060 tcp: 127.0.0.1:5060 tcp: 192.168.180.200:5060 Aliases: tcp: CICTPH01LLB01:5060 tcp: localhost:5060 udp: CICTPH01LLB01:5060 udp: localhost:5060 0(19009) INFO: <core> [core/tcp_main.c:4735]: init_tcp(): using epoll_lt as the io watch method (auto detected) 0(19011) INFO: rr [../outbound/api.h:52]: ob_load_api(): unable to import bind_ob - maybe module is not loaded 0(19011) INFO: rr [rr_mod.c:177]: mod_init(): outbound module not available 0(19011) INFO: auth [auth_mod.c:347]: mod_init(): qop set, but nonce-count (nonce_count) support disabled 0(19011) INFO: <core> [main.c:2683]: main(): processes (at least): 32 - shm size: 67108864 - pkg size: 8388608 0(19011) INFO: <core> [core/udp_server.c:153]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 0(19011) INFO: <core> [core/udp_server.c:205]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 0(19011) INFO: <core> [core/udp_server.c:153]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 0(19011) INFO: <core> [core/udp_server.c:205]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 21(19044) INFO: jsonrpcs [jsonrpcs_sock.c:443]: jsonrpc_dgram_process(): a new child 0/19044 root@CICTPH01LLB01:/usr/lib/x86_64-linux-gnu/kamailio/modules# 22(19053) INFO: ctl [io_listener.c:214]: io_listen_loop(): io_listen_loop: using epoll_lt io watch method (config) ============================================================================ ===================================== Feb 18 18:33:19 CICTPH01LLB01 systemd[1]: Starting Kamailio (OpenSER) - the Open Source SIP Server... Feb 18 18:33:19 CICTPH01LLB01 kamailio: INFO: <core> [core/sctp_core.c:74]: sctp_core_check_support(): SCTP API not enabled - if you want to use it, load sct p module Feb 18 18:33:19 CICTPH01LLB01 kamailio: INFO: <core> [core/tcp_main.c:4735]: init_tcp(): using epoll_lt as the io watch method (auto detected) Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: Listening on Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: udp: 127.0.0.1:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: udp: 192.168.180.200:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: tcp: 127.0.0.1:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: tcp: 192.168.180.200:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: Aliases: Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: tcp: CICTPH01LLB01:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: tcp: localhost:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: udp: CICTPH01LLB01:5060 Feb 18 18:33:19 CICTPH01LLB01 kamailio[18815]: udp: localhost:5060 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: rr [../outbound/api.h:52]: ob_load_api(): unable to import bind_ob - maybe module is not loaded Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: rr [rr_mod.c:177]: mod_init(): outbound module not available Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: auth [auth_mod.c:347]: mod_init(): qop set, but nonce-count (nonce_count) support disabled Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [main.c:2683]: main(): processes (at least): 32 - shm size: 67108864 - pkg size: 8388608 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [core/udp_server.c:153]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [core/udp_server.c:205]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [core/udp_server.c:153]: probe_max_receive_buffer(): SO_RCVBUF is initially 212992 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [core/udp_server.c:205]: probe_max_receive_buffer(): SO_RCVBUF is finally 425984 Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: ERROR: <core> [core/tcp_main.c:2863]: tcp_init(): bind(d, 0x7f81495f1efc, 16) on 127.0.0.1:5060 : Address already in use Feb 18 18:33:19 CICTPH01LLB01 /usr/sbin/kamailio[18817]: INFO: <core> [core/sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized Feb 18 18:33:19 CICTPH01LLB01 systemd[1]: kamailio.service: Control process exited, code=exited status=255 Feb 18 18:33:19 CICTPH01LLB01 systemd[1]: kamailio.service: Failed with result 'exit-code'. Feb 18 18:33:19 CICTPH01LLB01 systemd[1]: Failed to start Kamailio (OpenSER) - the Open Source SIP Server. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: kamailio.service: Service hold-off time over, scheduling restart. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: kamailio.service: Scheduled restart job, restart counter is at 5. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: Stopped Kamailio (OpenSER) - the Open Source SIP Server. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: kamailio.service: Start request repeated too quickly. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: kamailio.service: Failed with result 'exit-code'. Feb 18 18:33:20 CICTPH01LLB01 systemd[1]: Failed to start Kamailio (OpenSER) - the Open Source SIP Server. Regards Amul Tyagi | Technical Head - Major Accounts & Support Globe : <tel:+63%20917%20488%200130> +63-9174880130 Skype : amultyagi365 Email : <mailto:am@lgorithmsolutions.com> am(a)lgorithmsolutions.com

5 4

Kamailio 5.4.4 segmentation fault after kamctl rpc dialplan.dump
by Julia Bo 22 Feb '21

22 Feb '21

Hello, Kamailio version 5.4.4. Kamailio segmentation fault after kamctl rpc dialplan.dump <dpid>, when dialplan includes variables in the replacement expression (repl_exp) field. Please see attached corefile. Thank you, Julia.

2 6

Kamailio Crash in TLS acceppt
by surendra p 22 Feb '21

22 Feb '21

Hi Team, Kamailio 5.2 getting crashed in tls_accept. Can someone help over here. #0 0x00007f1b135c09b2 in EVP_DecryptUpdate () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #1 0x00007f1b135f3034 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #2 0x00007f1b135f36a3 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #3 0x00007f1b135f4051 in RAND_DRBG_reseed () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #4 0x00007f1b135f457d in RAND_DRBG_generate () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #5 0x00007f1b135f46f1 in RAND_DRBG_bytes () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #6 0x00007f1b1378649e in ?? () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1 #7 0x00007f1b13777f5f in ?? () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1 #8 0x00007f1b13763f34 in SSL_do_handshake () from /usr/lib/x86_64-linux-gnu/libssl.so.1.1 #9 0x00007f1acf246fce in tls_accept (c=0x7f1ad35fdc60, error=0x7ffc238dd1dc) at tls_server.c:411 #10 0x00007f1acf2503a3 in tls_read_f (c=0x7f1ad35fdc60, flags=0x7ffc238dd50c) at tls_server.c:1097 #11 0x0000559ac2ec9b46 in tcp_read_headers (c=0x7f1ad35fdc60, read_flags=0x7ffc238dd50c) at core/tcp_read.c:462 #12 0x0000559ac2eced1c in tcp_read_req (con=0x7f1ad35fdc60, bytes_read=0x7ffc238dd514, read_flags=0x7ffc238dd50c) at core/tcp_read.c:1348 #13 0x0000559ac2ed5442 in handle_io (fm=0x7f1b13d2cef8, events=8193, idx=-1) at core/tcp_read.c:1715 #14 0x0000559ac2ec424a in io_wait_loop_epoll (h=0x559ac3153f80 <io_w>, t=2, repeat=0) at core/io_wait.h:1073 #15 0x0000559ac2ed6df4 in tcp_receive_loop (unix_sock=75) at core/tcp_read.c:1829 #16 0x0000559ac2db8685 in tcp_init_children () at core/tcp_main.c:4802 #17 0x0000559ac2cb6867 in main_loop () at main.c:1714 #18 0x0000559ac2cbd6af in main (argc=15, argv=0x7ffc238ddb88) at main.c:2644

2 2

Problem with kamalio.
by Silvère Dekpon 22 Feb '21

22 Feb '21

Hi, how are you. I got this mail on github kamalio page. Here is my problem detail : Everytime when my vps reboot, i got a problem with my kamalio. It seems like service can't start. So i have to restart it myself by using "kamctl restart". When i enter this command, i got an error on screen. Here is error detail : ERROR: PID file /var/run/kamailio/kamailio.pid does not exist -- Kamailio start failed How can i solve it ?

2 1

Unregister with Multiple Contacts
by Charles Phillips 21 Feb '21

21 Feb '21

Happy Friday! To clean up contacts that have sent requests to unregister (Expires: 0) I am executing the following after a 200 OK response from the upstream server: reg_fetch_contacts("location", "$fu", "un_reg"); xlog("L_INFO", "Removing unregistered contact From: $si To: $tu Ruid: $ulc(un_reg=>ruid)\n"); unregister("location", "$fu", "$ulc(un_reg=>ruid)”); This produces the desired result when there is only one contact per AoR, but when multiple contacts are present, it seems to delete the first ruid (which makes sense as I am only providing the $fu). So, the question, can I select the contact by call-id or some other unique identifier specific to the desired contact that I can grab from the transaction? Reading the reg_fetch_contact and unregister docs, they do not seem to provide for selection beyond uri. - Charles

2 3

← Newer
1
2
3
4
5
6
7
8
9
Older →

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2021