sr-users December 2022

sr-users@lists.kamailio.org

54 participants
64 discussions

[Serusers] Digest Authentication with Tenor DX
by Ashutosh Kumar 29 Apr '25

29 Apr '25

Hi, Does someone have any idea/experience with Quintum DX radius server's support for digest mode authentication. The Access-Request packets sent by SER are getting an error back. Guide. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

Getting the name of an already set onreply_route
by Denys Pozniak 14 Oct '24

14 Oct '24

Hello! Is it possible to find out the name of the onreply_route that was set before? Something like this: t_on_reply("MANAGE_REPLY"); ... if ( t_is_set("onreply_route") ) { get_onreply_route_name(); ... } -- BR, Denys Pozniak

3 5

Via header force change protocol to TLS?
by Anthony Alba 30 May '24

30 May '24

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it … [View More]

4 10

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) … [View More]

4 9

Increase MAX_BRANCHES_LIMIT
by Lars Jansson 18 Sep '23

18 Sep '23

Hi, I am building a configuration script where for some traffic flows parallel forking will be needed, and in this case I need to go beyond the default max limit of the max amount of branches. Apart from this specific case the traffic load that kamailio will need to handle is very low, let's say just one second here and there with up to 5 concurrent calls at most. This limit is as far as I understand set here: usr/local/src/kamailio-5.6/kamailio/src/core/config.h And the default limit … [View More]

4 9

Is Min-SE check broken?
by harneet singh 31 May '23

31 May '23

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition … [View More]

2 3

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK
by Daniel Tryba 02 May '23

02 May '23

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

5 19

Rtpengine: no audio after kernelization.
by Michel Pelletier 17 Apr '23

17 Apr '23

Hello, I am proxying all RTP through RTPEngine. Everything works fine until about 5 seconds into the call, when rtpengine enters kernelization, after which all RTP forwarding ceases. I've checked the required iptables entries, and all looks good. Here is a description of my environment: # cat os-release PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" … [View More]

4 13

enable topology hiding on one side or dynamic ip in topoh module Contact and Via Header
by Patrick Karton 17 Feb '23

17 Feb '23

Hello , im using kamailio with two interfaces external and internal. i need a way either to : * enable topoh hiding only when outgoing interface is external ( mask contact and Via ip only when ougoing interface is external * or if it is not possible to enable it only in one direction.i want to know how to configure dynamic(for example in xavp or avp) ip to put in Contact and Via when topoh is enabled. i see that the 'mask_ip' parameter of topoh module is a string. so we can not set … [View More]

4 8

Kamailio not responding after stress test
by Igor Olhovskiy 27 Jan '23

27 Jan '23

Hello, I'm continuing investigations on Kamailio and stress test. Got it again in the state where it's not accepting any new TCP/TLS connections (UDP still works though), but all looks good from lsof/netnstat part, like system is not reporting any zombie connections. Restart of Kamailio process helps This time I got output of kamctl trap Put it here: https://pastebin.com/iYrNZ8U9 kamailio --version version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, … [View More]

3 7

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2022