sr-users March 2022

sr-users@lists.kamailio.org

62 participants
91 discussions

Via header force change protocol to TLS?

by Anthony Alba

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

1 month, 2 weeks

Dialog and DMQ on restart

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

3 months, 3 weeks

Is Min-SE check broken?

by harneet singh

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition like below: if (sst_min_se < MIN(minse, se.interval)) { However, shouldn't it be the other way around? ie if (sst_min_se > MIN(minse, se.interval)) { because we need to send 422 if the received value(in INVITE etc) is smaller than the sst configure min_se value? I also found a different documentation, at https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6… where the check is as below? if (sst_min_se > MIN(minse, se.interval)) { Can someone confirm if this is broken, or my understanding is incorrect? Regards, Harneet -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

1 year, 1 month

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK

by Daniel Tryba

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

1 year, 2 months

enable topology hiding on one side or dynamic ip in topoh module Contact and Via Header

by Patrick Karton

Hello , im using kamailio with two interfaces external and internal. i need a way either to : * enable topoh hiding only when outgoing interface is external ( mask contact and Via ip only when ougoing interface is external * or if it is not possible to enable it only in one direction.i want to know how to configure dynamic(for example in xavp or avp) ip to put in Contact and Via when topoh is enabled. i see that the 'mask_ip' parameter of topoh module is a string. so we can not set a dynamic value here unfortunately. Thanks

1 year, 4 months

Possibility of mirroring the rpm/deb.kamailio.org repos efficiently via rsync?

by Malte Schmidt

Hello, is there an rsync endpoint available or is there a possiblity of setting this up? Creating a mirror via HTTP is a rather quick and dirty solution and while the deb-repo can be mirrored using debmirror, the rpm repo is hard to sync to a non-CentOS-based machine due to missing dependencies such as yum and reposync in latest Debian-based systems. Would be great to get some input in regards to this topic. Cheers

2 years

Intermittent error seen when using a python script in kamailio

by Wojciech Kopciewicz

Hi, Intermittently we are observing the following error when checking if given header is present in SIP INVITE: SystemError: returned a result with an error set The complete stack trace is (some names redacted): 11(28) ERROR: {1 195 INVITE nMHZDN.10nOIDt4ldOwz5cqz0XnMepA9} app_python3 [python_support.c:156]: python_handle_exception(): apy_exec: modify_headers((null)): Unhandled exception in the Python code: TypeError: an integer is required (got type NoneType) The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/etc/kamailio/kamailio.py", line 25, in modify_headers self.modify_header("SomeHeader") File "/etc/kamailio/kamailio.py", line 29, in modify_header present = KSR.hdr.is_present(header_name) SystemError: returned a result with an error set Kamailio version (kamailio -v output): version: kamailio 5.4.6 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 8.3.0 Operation system: Linux kamailio-5c7484c74d-vhhr8 5.4.0-1056-azure #58~18.04.1-Ubuntu SMP Wed Jul 28 23:14:18 UTC 2021 x86_64 GNU/Linux Are you able to help me find the root cause of this issue? Pozdrawiam / Best regards, Wojtek -- *For more information on how and why we collect your personal information, please visit our Privacy Policy <https://www.motorolasolutions.com/en_us/about/privacy-policy.html?elqTrackI…>.*

2 years, 2 months

Roadmap to the next major release - v5.6.0

by Daniel-Constantin Mierla

Hello, it is the time to plan a bit the road to the next major release, to be versioned 5.6.0. The 5.5.0 was release about one year ago, therefore it is time to set the milestones for getting 5.6.0 out. I would propose to freeze the development on Thursday, April 14, 2020, test till mid of May or so, then release v5.6.0. There is a lot of development to existing components and a couple of new modules. If anyone wants a different time line towards 5.6.0, let's discuss and choose the one that suits most of the developers. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

2 years, 3 months

How to submit updates for core documentation?

by Ben Kaufman

Hello, I had a small patch merged for 5.6 to add preprocessor macros #!trydefenv and #!trydefenvs. (https://github.com/kamailio/kamailio/issues/2967), but they need documentation. I believe that they should ultimately end up on this page: https://www.kamailio.org/wiki/cookbooks/devel/core. I don't see this in the /doc section of the repo. What's the process for me to submit this documentation? Ben Kaufman Sr. VoIP Engineer - BCM One +1.612.735.9309 bkaufman(a)bcmone.com<mailto:bkaufman@bcmone.com> 24 hour client support: +1.855.639.6300 [https://www.bcmone.com/files/bcmone-logo.png]<https://www.bcmone.com/> [https://www.bcmone.com/files/twitter-icon-circle.png] <https://www.facebook.com/bcmonenyc/> [https://www.bcmone.com/files/twitter-icon-circle.png] <https://twitter.com/bcm_one/> [https://www.bcmone.com/files/linkedin-icon-circle.png] <https://www.linkedin.com/company/business-communications-management/> NOTE: This e-mail and any attachments are from BCM One, Inc. and are intended solely for the use and review of the individual(s) to whom it is addressed. If you believe you received this e-mail in error, please notify the sender immediately, delete the e-mail (and any attachments) from your computer and do not copy or disclose it to anyone else.

2 years, 3 months

Re: [SR-Users] More than TCP 800 concurrent calls, slows Kamailio (LUA FILE API REQUESTS)

by Henning Westerholt

Hello, please keep the list in CC, that others can comment as well. Beside from the obvious (improving the performance of the lua API call), you could use indeed asynchronous processing. If you just use the lua code to emit the REST request, using a native http client module would be probably also faster as doing it over lua. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Giovanni Jose <gio.jose(a)gmail.com> Sent: Wednesday, March 30, 2022 5:17 PM To: Henning Westerholt <hw(a)gilawa.com> Subject: Re: [SR-Users] More than TCP 800 concurrent calls, slows Kamailio (LUA FILE API REQUESTS) Hello Henning, Thanks so much for the fast response I just commented the loop and I was hitting the backend and it's slow anyway maybe it's because, for this type of implementation when the destination of the call is decided by the API backend, I need to use the http_async_client module? I am noticing that for high volume calls kamailio slows the traffic and shows errors because there's a delay that is been added when the backend responds for every call. On Tue, Mar 29, 2022 at 11:53 PM Henning Westerholt <hw(a)gilawa.com<mailto:hw@gilawa.com>> wrote: Hello, why are you sleeping for 1s in the loop? This will cause Kamailio to block processing. I also do not see any stop condition on the loop, so it will loop until the limit. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <sr-users-bounces(a)lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>> On Behalf Of Giovanni Jose Sent: Tuesday, March 29, 2022 9:46 PM To: sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> Subject: [SR-Users] More than TCP 800 concurrent calls, slows Kamailio (LUA FILE API REQUESTS) Hello Guys I am having this issue where kamailio is receiving requests from SIPp (we are currently testing the platform and doing QA) but if we do more than 800 concurrent calls kamailio starts failing and slowing the requests, The scenario is the following: I am sending 5000 calls at 100 CPS on TCP and I am having this route in the configuration file: # Handle the calls to api route[CALL_API] { xlog("L_NOTICE"," Call request $var(call_request) method: $rm \n"); $var(loop_true)=1; while ($var(loop_true)) { if(!lua_run("call_request","$var(call_request)","$sht(token=>new_token)")) { xlog("L_NOTICE", "SCRIPT: failed to execute lua function!\n"); } if ($var(loop_true)){ sleep("1"); } } xlog("L_NOTICE", "SCRIPT: Sucess to execute lua function!\n"); } So I am executing a LUA script for the requests and the API response will tell the destination of the call. At 800 concurrent calls, I can notice SLOWLINESS in the SIPp testing tool, and then I will start receiving 408 timeouts. This sounds like a load issue or something because I believe there's a time that it's been added every time we hit the backend and wait for the response. any help will be appreciated Regards Gio

2 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2022