sr-users February 2023

sr-users@lists.kamailio.org

36 participants
48 discussions

Getting the name of an already set onreply_route
by Denys Pozniak 14 Oct '24

14 Oct '24

Hello! Is it possible to find out the name of the onreply_route that was set before? Something like this: t_on_reply("MANAGE_REPLY"); ... if ( t_is_set("onreply_route") ) { get_onreply_route_name(); ... } -- BR, Denys Pozniak

3 5

Via header force change protocol to TLS?
by Anthony Alba 30 May '24

30 May '24

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

4 10

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

4 9

Increase MAX_BRANCHES_LIMIT
by Lars Jansson 18 Sep '23

18 Sep '23

Hi, I am building a configuration script where for some traffic flows parallel forking will be needed, and in this case I need to go beyond the default max limit of the max amount of branches. Apart from this specific case the traffic load that kamailio will need to handle is very low, let's say just one second here and there with up to 5 concurrent calls at most. This limit is as far as I understand set here: usr/local/src/kamailio-5.6/kamailio/src/core/config.h And the default limit is: #define MAX_BRANCHES_LIMIT 32 /*!< limit of maximum number of branches per transaction */ Here are the questions I have related to this: 1) If I increase the value of this constant in config.h, how high is it reasonable to set this value and still have a stable system? 2) If I increase MAX_BRANCHES_LIMIT beyond 32, are there also other parameters that needs to be changed for the system to be able to cope, and if so whichparameters? Regards, Lars

4 9

Is Min-SE check broken?
by harneet singh 31 May '23

31 May '23

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition like below: if (sst_min_se < MIN(minse, se.interval)) { However, shouldn't it be the other way around? ie if (sst_min_se > MIN(minse, se.interval)) { because we need to send 422 if the received value(in INVITE etc) is smaller than the sst configure min_se value? I also found a different documentation, at https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6… where the check is as below? if (sst_min_se > MIN(minse, se.interval)) { Can someone confirm if this is broken, or my understanding is incorrect? Regards, Harneet -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

2 3

Performing async_http calls on stateless Loadbalancers
by Julius Flohr 09 May '23

09 May '23

Hi List, we are running several stateless SIP Loadbalancers using Kamaillio 5.1 and 5.6. Now we would like to perform an async_http request if an INVITE matches certain criteria. The request itself is performed very similar to how it's described here [1] This uses the transaction module in order to assure that the response can be mapped to the original request. However, this also means that the processing of the entire request becomes stateful which we would like to avoid. We tried to use t_release() in the callback route (in [1] this route is called "RELAY_API_RESPONSE"). However, documentation says that this is only allowed in the REQUEST_ROUTE. Is there an easy way to circumnavigate this issue? Cheers [1]: https://wazo-platform.org/blog/kamailio-routing-with-rtjson-and-http-async-… -- Julius Flohr - Voice Engineer - flohr(a)sipgate.de Telefon: +49 (0)211-63 55 55-0 Mobil: +49 (0)1579-000-0205 Telefax: +49 (0)211-63 55 55-22 sipgate GmbH - Gladbacher Str. 74 - 40219 Düsseldorf HRB Düsseldorf 39841 - Geschäftsführer: Thilo Salmon, Tim Mois Steuernummer: 106/5724/7147, Umsatzsteuer-ID: DE219349391 www.sipgate.de - www.sipgate.co.uk

3 3

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK
by Daniel Tryba 02 May '23

02 May '23

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

5 19

Rtpengine: no audio after kernelization.
by Michel Pelletier 17 Apr '23

17 Apr '23

Hello, I am proxying all RTP through RTPEngine. Everything works fine until about 5 seconds into the call, when rtpengine enters kernelization, after which all RTP forwarding ceases. I've checked the required iptables entries, and all looks good. Here is a description of my environment: # cat os-release PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" # kamailio -v version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54a9c1 compiled on 16:02:49 Dec 1 2022 with gcc 10.2.1 # rtpengine -v Version: 11.1.1.3-1~bpo11+1 Michel Pelletier

4 13

Dispatcher Incoming
by nutxase 14 Mar '23

14 Mar '23

Hi All I have setup kamailio using dispatcher to proxy registrations from the UAC to asterisk but when asterisk sends an incoming call it does not seem to keep the path header and therefore kamailio sends 404 is there anyway around this? Thanks Sent with [Proton Mail](https://proton.me/) secure email.

5 18

Kamailio v5.6.3 Released
by Daniel-Constantin Mierla 05 Mar '23

05 Mar '23

Hello, Kamailio SIP Server v5.6.3 stable release is out. This is a maintenance release of the latest stable branch, 5.6, that includes fixes since the release of v5.6.2. There is no change to database schema or configuration language structure that you have to do on previous installations of v5.6.x. Deployments running previous v5.6.x versions are strongly recommended to be upgraded to v5.6.3. For more details about version 5.6.3 (including links and guidelines to download the tarball or from GIT repository), visit: * https://www.kamailio.org/w/2023/01/kamailio-v5-6-3-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio World Conference - June 5-7, 2023 - www.kamailioworld.com

5 10

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users February 2023