sr-users July 2023

sr-users@lists.kamailio.org

28 participants
34 discussions

Getting the name of an already set onreply_route

by Denys Pozniak

Hello! Is it possible to find out the name of the onreply_route that was set before? Something like this: t_on_reply("MANAGE_REPLY"); ... if ( t_is_set("onreply_route") ) { get_onreply_route_name(); ... } -- BR, Denys Pozniak

1 month, 1 week

Via header force change protocol to TLS?

by Anthony Alba

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

5 months, 3 weeks

Dialog and DMQ on restart

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

8 months

5.6.4 debian htable dbmode=1 not writing at shutdown

by Bernd Krueger-Knauber

Hi, I have still the problem that my htables are not written into a sqlite db when I shutdown kamailio. Manual writing via: kamcmd htable.store ... is working. As I can see in the logs with highest loglevel, the function destroy() is never called. ht_db_url.len is > 0 ht_db_init_con() should work, else nothing would work with the db. But I can not see the debug messages from ht_db_open_con() Any ideas? Best regards, Bernd

11 months, 4 weeks

error in parsing HTTP messages

by sigxcpu＠gmail.com

Hello, In reference to this issue https://github.com/kamailio/kamailio/issues/3081 I've been advised to set http_reply_parse to "no" which I did (and it is the default value anyways). # grep http_reply_parse /etc/kamailio/kamailio.cfg http_reply_parse=no After setting this, I still get these parsing errors: { "idx": 23, "pid": 102, "level": "ERROR", "module": "core", "file": "core/parser/msg_parser.c", "line": 748, "function": "parse_msg", "logprefix": "", "message": "ERROR: parse_msg: message=<HTTP/1.1 100 Continue\r\n\r\nHTTP/1.1 200 OK\r\ndate: Wed, 26 Jul 2023 16:43:19 GMT\r\ncontent-length: 224\r\ncontent-type: text/plain; charset=utf-8\r\n\r\n{\"result\": {\"ruri\":\"\",\"fU\":\"\",\"tU\":\"\",\"privacy\":\"\",\"identity\":\"\",\"error\":{\"code\":0,\"message\":\"\"},\"mb\":\"\",\"Headers\":null,\"encrypted\":\"\",\"sipsScheme\":\"\",\"attestation\":\"\",\"authUser\":\"\",\"authPassword\":\"\",\"disableStirShaken\":\"\"}}>" } Is there anything that I am missing beyond setting that parameter? Thank you, Alexandru

1 year, 1 month

Several crashs in prepare_new_uac

by Igor Potjevlesch

Hello! We had several crashs of Kamailio (5.3.4) in the last weeks. Each time, the last logs are: /usr/local/sbin/kamailio[20942]: CRITICAL: <core> [core/forward.c:347]: get_send_socket2(): unsupported proto 0 (*) /usr/local/sbin/kamailio[20966]: CRITICAL: <core> [core/forward.c:347]: get_send_socket2(): unsupported proto 111 (unknown) When we look to the coredump, here below the first traces: (gdb) bt #0 0x00007f70131b3d91 in prepare_new_uac (t=0x7f6fe1d45340, i_req=0x7f7016fbe208, branch=0, uri=0x7fff37142fa0, path=0x7fff37142f80, next_hop=0x7f7016fbe480, fsocket=0x0, snd_flags=..., fproto=0, flags=2, instance=0x7fff37142f70, ruid=0x7fff37142f60, location_ua=0x7fff37142f50) at t_fwd.c:463 #1 0x00007f70131b7c42 in add_uac (t=0x7f6fe1d45340, request=0x7f7016fbe208, uri=0x7f7016fbe480, next_hop=0x7f7016fbe480, path=0x7f7016fbe848, proxy=0x0, fsocket=0x0, snd_flags=..., proto=0, flags=2, instance=0x7f7016fbe858, ruid=0x7f7016fbe870, location_ua=0x7f7016fbe880) at t_fwd.c:805 #2 0x00007f70131bfebd in t_forward_nonack (t=0x7f6fe1d45340, p_msg=0x7f7016fbe208, proxy=0x0, proto=0) at t_fwd.c:1667 #3 0x00007f701316cf44 in t_relay_to (p_msg=0x7f7016fbe208, proxy=0x0, proto=0, replicate=0) at t_funcs.c:332 #4 0x00007f70131a3a11 in _w_t_relay_to (p_msg=0x7f7016fbe208, proxy=0x0, force_proto=0) at tm.c:1689 #5 0x00007f70131a4c51 in w_t_relay (p_msg=0x7f7016fbe208, _foo=0x0, _bar=0x0) at tm.c:1889 #6 0x00000000005a1f57 in do_action (h=0x7fff37143d90, a=0x7f7016bd1b10, msg=0x7f7016fbe208) at core/action.c:1071 #7 0x00000000005aeb1e in run_actions (h=0x7fff37143d90, a=0x7f7016bd1b10, msg=0x7f7016fbe208) at core/action.c:1576 #8 0x00000000005af1df in run_actions_safe (h=0x7fff37146e90, a=0x7f7016bd1b10, msg=0x7f7016fbe208) at core/action.c:1640 #9 0x000000000066aa50 in rval_get_int (h=0x7fff37146e90, msg=0x7f7016fbe208, i=0x7fff37144238, rv=0x7f7016bd1e60, cache=0x0) at core/rvalue.c:915 #10 0x000000000066f000 in rval_expr_eval_int (h=0x7fff37146e90, msg=0x7f7016fbe208, res=0x7fff37144238, rve=0x7f7016bd1e58) at core/rvalue.c:1913 #11 0x000000000066f453 in rval_expr_eval_int (h=0x7fff37146e90, msg=0x7f7016fbe208, res=0x7fff371446ec, rve=0x7f7016bd2588) at core/rvalue.c:1921 #12 0x00000000005a1a1d in do_action (h=0x7fff37146e90, a=0x7f7016bd2e08, msg=0x7f7016fbe208) at core/action.c:1047 #13 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016bcbd20, msg=0x7f7016fbe208) at core/action.c:1576 #14 0x000000000059e97d in do_action (h=0x7fff37146e90, a=0x7f7016ef19b8, msg=0x7f7016fbe208) at core/action.c:695 #15 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016e3f578, msg=0x7f7016fbe208) at core/action.c:1576 #16 0x000000000059e97d in do_action (h=0x7fff37146e90, a=0x7f7016c220a0, msg=0x7f7016fbe208) at core/action.c:695 #17 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016c220a0, msg=0x7f7016fbe208) at core/action.c:1576 #18 0x00000000005aae93 in do_action (h=0x7fff37146e90, a=0x7f7016c23978, msg=0x7f7016fbe208) at core/action.c:1207 #19 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016c20748, msg=0x7f7016fbe208) at core/action.c:1576 #20 0x00000000005a1ec6 in do_action (h=0x7fff37146e90, a=0x7f7016c576a0, msg=0x7f7016fbe208) at core/action.c:1062 #21 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016c0b770, msg=0x7f7016fbe208) at core/action.c:1576 #22 0x000000000059e97d in do_action (h=0x7fff37146e90, a=0x7f7016bc9920, msg=0x7f7016fbe208) at core/action.c:695 #23 0x00000000005aeb1e in run_actions (h=0x7fff37146e90, a=0x7f7016bb9100, msg=0x7f7016fbe208) at core/action.c:1576 #24 0x00000000005af2a7 in run_top_route (a=0x7f7016bb9100, msg=0x7f7016fbe208, c=0x0) at core/action.c:1661 #25 0x00000000005bcb7a in receive_msg ( buf=0xadbd80 <buf.6971> "INVITE sip:AAAAAAAAAA@W.X.Y.Z SIP/2.0\r\nVia: SIP/2.0/UDP W.X.Y.Z;rport;branch=z9hG4bKZD8Za7p2XF7cF\r\nMax-Forwards: 69\r\nFrom: \"AAAAAAAAAA\" sip:AAAAAAAAAA@W.X.Y.Z;tag=aXy4Na2NtvKBK\r\nTo: <"..., len=1011, rcv_info=0x7fff371474c0) at core/receive.c:423 #26 0x0000000000488e7f in udp_rcv_loop () at core/udp_server.c:548 #27 0x000000000042650f in main_loop () at main.c:1673 #28 0x000000000042ec18 in main (argc=7, argv=0x7fff37147c38) at main.c:2802 Is there anything relevant in this to know what's wrong? Regards, Igor. -- Cet e-mail a été vérifié par le logiciel antivirus d'Avast. www.avast.com

1 year, 1 month

Increase MAX_BRANCHES_LIMIT

by Lars Jansson

Hi, I am building a configuration script where for some traffic flows parallel forking will be needed, and in this case I need to go beyond the default max limit of the max amount of branches. Apart from this specific case the traffic load that kamailio will need to handle is very low, let's say just one second here and there with up to 5 concurrent calls at most. This limit is as far as I understand set here: usr/local/src/kamailio-5.6/kamailio/src/core/config.h And the default limit is: #define MAX_BRANCHES_LIMIT 32 /*!< limit of maximum number of branches per transaction */ Here are the questions I have related to this: 1) If I increase the value of this constant in config.h, how high is it reasonable to set this value and still have a stable system? 2) If I increase MAX_BRANCHES_LIMIT beyond 32, are there also other parameters that needs to be changed for the system to be able to cope, and if so whichparameters? Regards, Lars

1 year, 2 months

pua_json mwi minimal json

by David VILLAUME

Hello, On 5.6.4, i’m trying to perform mwi pua_json, but cannot get it working. I have a doubt about my json and spent some time to make variations on json without success. Does one of you played with it and can tell me if something is wrong about this json ? { "Event-Package":"message-summary", "Event-Name":"update" "expires":3600, "From":sip:ccoca@dff.com, "To":sip:ccoca@dff.com, "Message-Account":sip:ccoca@dff.com, "Messages-Waiting":"yes", "MWI-Voice-Message":"2/8 (0/0)", "Messages-New":"2", "Messages-Saved":"8", "Messages-Urgent":"0", "Messages-Urgent-Saved":"0", "From-Realm":"dff.com", "From-User":"ccoca", "Call-ID":0_845806535@10.22.22.22<mailto:0_845806535@10.22.22.22>, } Regards, David

1 year, 3 months

Saving credentials in yaml/txt format

by max＠telemessage.com

Hello all, I want to save some credentials for different users I have that are being used in a digest authorization (INVITE), with different realms (I don't want the credentials to be hardcoded). I tried to look at how can I read into my kamalio.cfg from yaml/txt file, but haven't found the right module for this. Thanks in advance, Max

1 year, 3 months

Help

by Shravan Kumar

Hello, How can I configure my Kamalio server to work as multihoming for sctp testing... Please ASAP!!

1 year, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2023