sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Re: [SR-Users] Kamailio v3.2.2 Released
by Daniel-Constantin Mierla 01 Feb '12

01 Feb '12

On 2/1/12 11:58 AM, Uri Shacked wrote: > worked OK, thanks. > [...] ok, keep cc-ing the list for topics discussed there, so people reading the archive later know what was the final solution. Cheers, Daniel > > On Wed, Feb 1, 2012 at 11:40 AM, Uri Shacked <ushacked(a)gmail.com > <mailto:ushacked@gmail.com>> wrote: > > i will try again. > i did edit the modules.lst file with all the modules i use.... > will let you know ASAP. > > On Wed, Feb 1, 2012 at 11:33 AM, Daniel-Constantin Mierla > <miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote: > > Hello, > > you haven't compiled and installed db_mysql from 3.2.2, so it > is installed the one from 3.2.1. Be sure you include db_mysql > in the list of modules to be compiled and installed, one > option is: > > make FLAVOUR=kamailio include_modules="db_mysql" cfg > make all > make install > > Cheers, > Daniel > > > On 2/1/12 10:30 AM, Uri Shacked wrote: >> >> made install and got the following error: >> "kamailio >> loading modules under >> /usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/ >> 0(21428) ERROR: <core> [sr_module.c:415]: ERROR: module >> version mismatch for >> /usr/local/lib64/kamailio/modules/db_mysql.so; core: >> kamailio 3.2.2 (x86_64/linux); module: kamailio 3.2.1 >> (x86_64/linux)" >> >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org> >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla --http://www.asipto.com <http://www.asipto.com/> > http://linkedin.com/in/miconda -- http://twitter.com/miconda > > > -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Re: [SR-Users] Kamailio v3.2.2 Released
by Uri Shacked 01 Feb '12

01 Feb '12

> made install and got the following error: > "kamailio > loading modules under > /usr/local/lib64/kamailio/modules_k/:/usr/local/lib64/kamailio/modules/ > 0(21428) ERROR: <core> [sr_module.c:415]: ERROR: module version mismatch > for /usr/local/lib64/kamailio/modules/db_mysql.so; core: kamailio 3.2.2 > (x86_64/linux); module: kamailio 3.2.1 (x86_64/linux)" >

3 2

Alternative Debian APT repository
by Daniel-Constantin Mierla 01 Feb '12

01 Feb '12

Hello, besides existing deb.kamailio.org, I added builds for Debian 5.0, 6.0 and Ubuntu 10.04 to the OpenSUSE Build Service (OBS). These repositories are built only for stable releases in 3.2.x series. Main target for them is to be sure the releases compile properly, across main Linux distributions, OBS providing an easy interface to keep updating and building until everything is ok. Anyhow, these alternative repositories may be handy to use for some of you. Details about setting APT sources are available at: http://www.kamailio.org/wiki/packages/debs#using_obs_repository Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

Re: [SR-Users] [newbie] questions
by Fred Posner 01 Feb '12

01 Feb '12

On Jan 31, 2012, at 6:32 PM, Me wrote: > Hi, Fred, > > >> For the sake of argument, let's say it was a smart-ass answer-- if your post was to "be pointed in the right direction where I could get (further) help" then that next help should either be: >> >> a) the wiki >> b) a training class >> c) a consultant >> > >> I'd say it again though - this thread is for me to seek answers/advice/help/guidance - if you, the previous poster, or anyone else for that matter is unwilling or unable to provide one, then just move along - there is nothing to see here. Smart-arse comments like "get a consultant" isn't what I am looking for, nor is the reason for starting this thread on this mailing list. >> > Can you read? > >> On forums I notice that those who get a better response usually use their real name instead of "Me" with a private/alias email address. >> > If I tell you that my real name is Josh Oliveira 'Capo' De Souza would that make you feel any better? Would you like to know my ssn as well? How about my date of birth? > > If I tell you where I live would that make you go away and prevent you from posting off-topic drivel on the above thread or ask silly questions you know you won't get answers to? TA! > > Josh Josh, I'm sorry-- my response wasn't insulting whatsoever. I'm not sure what your problem is, but to me it looks like you're looking for a fight. I erred on the side of thinking you were above that-- my mistake. I bid you a good day. --fred

1 0

[newbie] questions
by Me 31 Jan '12

31 Jan '12

Apologies if any of the questions below are a bit dumb - I don't pretend to be an expert in SIP/VOIP - I am just an ordinary user looking for answers. Our current setup involves processing a small number of internal sip accounts (up to 10, no more than that) and one "public" one (with a separate registrar) in the following way: On our server we have three interfaces: eth0, eth1 and tun0. eth0 is our entry point to the public internet, eth1 faces our internal network and tun0 is a private vpn, which connects all our smartphones to the internal network (via Wifi, EDGE/2G/3G etc). This gives us the mobility. Up until now, we have been routing voip calls via a commercial (closed source), very limited, terribly outdated (Pentium code base!) and rather buggy sip proxy. I had to employ a lot of hacks on our server in order to route calls as this proxy can only listen on a single interface. It was also a nightmare to maintain. Unsurprisingly, I decided that enough is enough and I am now determined to replace it. We route calls in the following way: all machines (PCs are all Linux based) & smartphones have their own sip/voip client installed on them (also using bluetooth). Internal calls are routed via the proxy between ourselves either on the internal net (eth1), or between the vpn and eth1 (eth1<->tun0). External calls (going out, i.e. outbound) are routed externally to our registrar, using a single separate voip account, via eth1<->eth0 or tun0<->eth0. As I am now looking to replace our proxy, I looked at Kamailio, but was soon completely overwhelmed by it (no offence intended, it was just too much to take at first). I would appreciate if any of you could give me a hand, or at least point me in the right direction, with the following issues: I presume I could configure Kamailio to listen on more than one interface and act as a proxy. How do I do that, so that it listens on all 3 interfaces and proxies requests in the following way: - calls made to <userX>@ourdomain.net to be routed internally via eth1 (internal net) or tun0 (private vpn); - calls made to anybody else to be routed externally via eth0 (public) using the separate "public" sip account with our external registrar; - calls made to the public sip account (from outside - the "public") need to be routed to a "nominated" internall account (say <user0>@ourdomain.net); - all other (internal) calls need to be routed depending on which interface this account has been registered/logged in - either the internal net (eth1) or the private vpn (tun0 - the smartphones). Obviously, calls need to be received (and routed properly) from all 3 interfaces. Is all of this possible with Kamailio? I want to avoid unnecessary complexities of the setup (as I already mentioned above - I am just a user and by no means an expert in sip/voip) and do not want to deploy something I do not need - I need to keep the memory footprint to a bare minimum, possibly without sacrificing performance. Once this is done, I would then move on to the next phase and use IM & ENUM, but this is once the above works. I looked at other alternatives, but I got very confused there as well - I couldn't figure out what exactly is the difference between, say, OpenSER, Kamailio, OpenSIPS and SIP-Router even? What is the best software to use in order to achieve the above setup? One last thing - I am a developer by trade and I am not afraid of "tweaking" things when needed. I was successful in compiling Kamailio from source (I use Fedora on all our machines) and I was pleased that I could exclude from the RPM .spec file the modules I think I did not need. I also made some modification of my own to make the database modules (mysql, postgresql and unixodbc) configurable in the same way the rest of the modules are. I could submit patches, if needed, so that these are incorporated into future releases - how do I do that? I could not do the same with OpenSIPS, however (which I also tried - out of curiosity!) - everything there seems to be lumped and compiled together regardless of whether it is needed or not. Any help as to helping me with the above issues is greatly appreciated, many thanks in advance for taking the time!

7 13

Kamailio Proxy and Asterisk
by Greg Mannie 31 Jan '12

31 Jan '12

Hello, We have been using Asterisk for sometime and over the last year have started hosting instances for our clients on a vmware platform. These virtual pbx are located on public ip addresses and each customer has their own SIP trunk arrangements with various providers. We have decided to pool our resources and would like to start aggregating traffic. From reading online I have installed Kamailio 3.1.x with Asterisk 1.6.x. On top of this I have installed Siremis 3.2 in hopes of using it as a graphical front end. I am wanting to use Kamailio as a proxy to the SIP providers and allow the Asterisk to register only with Kamailio. Is there a link to some example configs with a tutorial pertaining to this type of deployment? If this is a good solution, it is my intention to recommend a consultant be hired to assist with a production server. I just need to learn allot more, before I can recommend Kamailio for the job. Do you think it's a good fit? Thank you for your kind responses, Greg

3 2

Enable application/pidf+xml
by Vogt, Jonathan 31 Jan '12

31 Jan '12

Hello all, I'm trying to set up kamailio as a sip server with presence support for Bravis. So far I got the call processing running on either openser-1.3.2-3build1 or 3.2.0+lucid1 running. Problem is the notification is not using Content-Type: application/pidf+xml My openser config is at http://pastebin.ca/2106401 My kamailio config is pretty much a stock configuration. It is at http://pastebin.ca/2106404 I enabled mysql and presence. I also tried using x-lite but there is no presence information either. modparam("presence_xml", "force_active", 1) did not seem to make a difference. (I cleaned my watchers table) I can see the database has the information but the notify packets are just like this: NOTIFY sip:2001@10.0.76.0:56239 SIP/2.0 Via: SIP/2.0/UDP 10.0.10.23;branch=z9hG4bKcb76.b2dab2d4.0 To: sip:2001@sip.intern.domain;tag=90cd05fe2b0619108127da16a6e721e1 From: sip:2002@sip.intern.domain;tag=10.785.1327490724.1 CSeq: 22 NOTIFY Call-ID: 90cd05fe-2b06-1910-9660-da16a6e721e1 Content-Length: 0 User-Agent: OpenSER (1.3.2-notls (i386/linux)) Max-Forwards: 70 Event: presence Contact: <sip:10.0.10.23:5060> Subscription-State: active;expires=300 Where is my mistake. As I'm new to kamailio please bear with me, if I just didn't find the right switch. Thanks Jonathan Vogt

4 13

IRC devel meeting
by Daniel-Constantin Mierla 31 Jan '12

31 Jan '12

Hello, I would like to schedule an IRC meeting to discuss about the development of the project in 2012. The topics coming in my mind at this moment: - roadmap to next major release v3.3.0 - outstanding issues at this time, if any - packaging - ways to automate the process better - documentation - suggestions to improve it and attract more contributions in this field - ideas for new features - administration - web site, mailing lists, etc ... do we miss some good resource out there that should be added in the eco-system? Please add your suggestions for agenda to the wiki page: * http://www.kamailio.org/wiki/devel/irc-meetings/2012a I proposed two dates (Jan 26 and Jan 31, 15:00GMT) and made a Doodle poll for it: * http://www.doodle.com/qzteweb62sqax5r6 If you wish other options for dates, let me know. Based on results, we will announce the final date. Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 3

Upgrade Kamailio from V3.1.5 to V3.2
by Phillman25 Kyriacou 31 Jan '12

31 Jan '12

Dear List I have Kamailio v3.1.5 currently installed and working, as this is currently in production, could someone please tell me what would be the safest way to upgrade to v3.2 without losing any data? Thanking you in advance for your support Phillip

1 0

new git commiter: Claudio Furrer
by Henning Westerholt 31 Jan '12

31 Jan '12

Hello, Claudio Furrer <elcaio(a)gmail.com> has now git commit access for his work on gentoo packaging. He create several patches and extensions for our gentoo package files in the last months and also maintain an own unofficial portage overlay tree at http://gpo.zugaina.org/net-misc/sip-router since some time. He just updated the gentoo packages in git master today, so if you're an gentoo user why not just give it a try - he is looking forward to your feedback. Welcome Claudio! Best regards, Henning

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users