sr-users

sr-users@lists.kamailio.org

42 participants
37519 discussions

Re: [SR-Users] Remote Party ID
by Jiri Kuthan 06 Dec '11

06 Dec '11

I think the most straight-forward way is to load the RPID in user preferences as AVP, and print the associated AVP from SER script. I guess there is an example of such in the OOB script -- have you tried to look there? -jiri On 12/6/11 2:50 PM, Pavel Segeč wrote: > Hi, > > > > I'm looking for some recommendations or guidlines. My leading IT department > which is providing PSTN connectivity requires to include Remote Party ID in > SIP Messages in a case where From URI is not in telco format (I prefer email > like style of addressing). How to simply assign to an user its Remote Party > ID which will be used when PSTN calling will occure? On what should I focus > on? To use user preferences with AVP pairs? or something another? > > > > thank > > > > palo73 > > > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

1 0

Can the SBC (Kamailio 3.1.x and FreeSWITCH 1.0.6+) do Upper Registration?
by edson.gomes.leme 06 Dec '11

06 Dec '11

3 2

Remote Party ID
by Pavel Segeč 06 Dec '11

06 Dec '11

Hi, I'm looking for some recommendations or guidlines. My leading IT department which is providing PSTN connectivity requires to include Remote Party ID in SIP Messages in a case where From URI is not in telco format (I prefer email like style of addressing). How to simply assign to an user its Remote Party ID which will be used when PSTN calling will occure? On what should I focus on? To use user preferences with AVP pairs? or something another? thank palo73

1 0

Can the SBC (Kamailio 3.1.x and FreeSWITCH 1.0.6+) do Upper Registration?
by edson.gomes.leme 06 Dec '11

06 Dec '11

1 0

kamailio fail to start when there are many records in DB in location or in pua table
by laura testi 06 Dec '11

06 Dec '11

Hi all, when there many records in DB tables like location(usrloc use write back mode), pua etc, kamailio fail to start by complaining "no pkg memory left" when try to load (restore) all records from DB to hashtable of location/pua. The share momory are allocated enough for the hashtable, but the default compilation of the PKG_MEMORY_SIZE is 4MB, which allow only restore several thousands records. I know I can increase the PKG_MEMORY_SIZE, but anyway there is a limitation which may fail to restore all records from DB during the startup of kamailio if it reach the limit of the number of records in DB. Is there anyway to reload the hashtable from table by doing query n rows a time and loop until non more result from DB? this will avoid the kamailio startup problem when there are many records in hashtable which are save also in DB. Thank you very much in advanced! Laura

2 4

dialog table entry not deleted after call if in-dialog requests are challenged
by Yufei Tao 06 Dec '11

06 Dec '11

Hi I am using dialog module in Kamailio 3.1.5, and find that the dialog table entry does not get deleted after call if in-dialog requests (e.g. session timer refresh re-INVITEs in my case) are challenged. The entry will stay there and get deleted after a long time (some time out? I didn't set any dialog timeouts myself). If I remove the challenge for in-dialog requests, then the dialog entry is deleted right after the call. I use the example config script with a bit of modification for my in-dialog route: route[WITHINDLG] { xlog("L_DBG","WITHINDLG: method=$rm, callid=$ci, cseq=$cs\n"); if (has_totag() ) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { # Filter out bad/faked up in-dialog requests. if ( !is_known_dlg() ) { xlog("L_WARN","WITHINDLG: NOT known dlg!! method=$rm, callid=$ci, cseq=$cs, $fu->$tu\n"); exit; } if (is_method("BYE")) { xlog("L_DBG","WITHINDLG: BYE found within Dialog \n"); setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } ########################################################## # challenge: if not CANCEL/ACK else if ( !is_method("CANCEL") && !is_method("ACK") ) { route(AUTH); } ########################################################## xlog("L_DBG","WITHINDLG: Entering RELAY route from WITHINDLG route. \n"); route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { xlog("L_DBG","WITHINDLG: ACK callid=$ci, cseq=$cs\n"); if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server xlog("L_DBG","ACK being relayed\n"); t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard xlog("L_DBG","ACK without matching transaction-ignore and discard\n"); exit; } } sl_send_reply("404","Not here"); } exit; } } The part that calls route(AUTH) that I added was the cause for the dialog entry not being deleted after call. Here are my dialog related settings: modparam("dialog", "enable_stats", 1) modparam("dialog", "dlg_flag", 4) modparam("dialog", "db_url", DBURL) modparam("dialog", "db_update_period", 20) # use short one to catch short dlgs (default:60) modparam("dialog", "db_mode", 1) # don't use did, so to cope with clients that don't preserve parameters # and mode 1 (fallback to 3261 matching) didn't work?? modparam("dialog", "dlg_match_mode", 2) modparam("dialog", "profiles_no_value", "inbound ; outbound") modparam("dialog", "dlg_extra_hdrs", "Hint: dialog expired\r\n") # default timeout set to max int 0x07FFFF FFFF modparam("dialog", "default_timeout", 2147483647) And I set the dialog flag (4) when receiving the initial INVITE. Any idea why? Am I using the dialog module correctly? Thanks very much! Yufei -- Yufei Tao Red Embedded This E-mail and any attachments hereto are strictly confidential and intended solely for the addressee. If you are not the intended addressee please notify the sender by return and delete the message. You must not disclose, forward or copy this E-mail or attachments to any third party without the prior consent of the sender. Red Embedded Design, Company Number 06688253 Registered in England: The Waterfront, Salts Mill Rd, Saltaire, BD17 7EZ

2 6

Issue while initiating database of my new module in kamailio
by Jagdeep S 06 Dec '11

06 Dec '11

Hi All, I am trying to create a new module under the kamailio source base, as part of understanding the framework. But when i start the Kamailio, i am seeing a core dump occuring when my new module is getting initiated and when the database is getting initialised. PFA the files attached containing the config file and source files used for creating module files. I am using the "DEFAULT_DB_URL" as database uri. The core dump backtrace shows that the module init fails at the following point: (gdb) bt #0 0x00000000 in ?? () #1 0x00ef390d in child_init (rank=9172352) at my_mod.c:239 #2 0x081226be in init_mod (m=0xb7515a04) at sr_module.c:922 #3 0x08122630 in init_mod (m=0xb7515c78) at sr_module.c:919 The line 239 in my module file points to the child-init function which initializes the database connectivity ==> "mymod_dbh = mymod_dbf.init(&db_url);" I have written the module using the template provided under the kamailio website. All the parameters are defined properly. Have no idea as to what is going wrong. I tried debugging the core dump using gdb but of no much help. I am not able to run the gdb during runti sr-users(a)lists.sip-router.orgme due to which i am not able to add break points and check. Not sure what the problem is. That's why i generated core dump file and analysed the backtrace, but i can't add break points and run it again as the executable is not involved. Can anyone please let me know what is the issue is or any pointers if i have missed some part of the code due to which the connectivity to db is not happening. Due to this i am not able to proceed further with the testing of my new module. Also any tips on how to do get the gdb debugging during runtime will also be very helpful. Any help is appreciated :). -- Jagdeep S

2 4

myself variable
by Ben WIlliams 06 Dec '11

06 Dec '11

Hi, I am an absolute beginniner learning SIP and Kamailio to setup Kamailio as the Internet proxy for our Asterisk PBX. My question is how to list the contents of the myself variable from the command line? My Kamailio server displays a list of Aliases on startup. Are these the contents of the myself variable? Thanks Ben

2 1

Video questions
by Lucas Alvarez 05 Dec '11

05 Dec '11

Hi, I have integrated Kamailio with asterisk, is it possible to handle video with kamailio and audio with asterisk? I'm using kamailio 3.2, I could difference a video call using sdpopts module, so before the invite is routed to asterisk kamailio sends it to the phone. But I would like that the video media would be peer to peer and the audio follows the path through asterisk. Thanks in advance, Lucas Alvarez

2 1

Permissions module question
by pablo umanzor 05 Dec '11

05 Dec '11

hi, recently i've implemented the module antiflood into kamailio (3.1.5 from GIT) ,the module works and i can see the ip banned with kamctl fifo sht_dump ipban now, when i try to allocate a trusted ip address with permissions module #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") #!endif -------------- if(src_ip!=TRUSTEDIP) then i make a sipsak flood test from ip address 1.2.3.4 , but the ip address entered before into trusted table (1.2.3.4 ) again is banned with antiflood module syslog file : INFO: auth [auth_mod.c:312]: auth: qop set, but nonce-count (nc_enabled) support disabled : INFO: permissions [parse_config.c:251]: file not found: /usr/local/etc/kamailio/permissions.allow : INFO: permissions [permissions.c:606]: default allow file (/usr/local/etc/kamailio/permissions.allow) not found => empty rule set : INFO: permissions [parse_config.c:251]: file not found: /usr/local/etc/kamailio/permissions.deny :INFO : permissions [permissions.c:615]: default deny file (/usr/local/etc/kamailio/permissions.deny) not found => empty rule set must i to create this files (permissions.allow, deny) to this module works? or is enough with empty rule set, according with documentation - there are another options into this module, but i need only enabling the trusted ip address part. regards pablo umanzor

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users