sr-users

sr-users@lists.kamailio.org

54 participants
37560 discussions

subscriber table reload
by Fabian Borot 12 Aug '11

12 Aug '11

Hello When one creates a user using the cli command like this: "kamctl add 200 abc", it is my understanding that the information goes to the subscriber table and into memory. Is that right? But if one populates the subscriber table manually [adding a record on the table w/o the /kamctlcli command], do we need to "load" those accounts into memory before a client tries to register or does kamailio looks it up when the registration request comes in at that time? What we are trying to do is to … [View More]

4 5

mtree question
by Juha Heinanen 12 Aug '11

12 Aug '11

after reading mtree readme, it is not clear to me if mt_match() matches to longest or any matching prefix in the three. for example, if i have tree with prefixes 00 and 00358 and string to be matched is 0035892345670, will mt_match() set pv to value associated with 00 or 00358? also, if mt_ignore_duplicates is set, will 00358 be considered as duplicate of 00 or just prefixes that are exactly same. finally, what are possible mt_tree_type values and what types they stand for? -- juha

1 0

kamailio - proxy/relay
by Sunny 11 Aug '11

11 Aug '11

Hi list, I'm trying to configure kamailio to work as a OBP (Outbound Proxy). Basically KAMAILIO receive requests from UAs, after that it acts like a client and send those requests to the IP-PBX. On the same way the responses are forwarded from IP-PBX to the UAs. [UA] --> [KAMAILIO] --> [IP-PBX ] [UA] <-- [KAMAILIO] <-- [IP-PBX ] Following possible call flow: [UA ] -> [KAMAILIO] SIP/SDP Request: INVITE sip:12345678909@[KAMAILIO], with session description [KAMAILIO] -&… [View More]

3 4

time for acc records
by Daniel-Constantin Mierla 11 Aug '11

11 Aug '11

Hello, it seems that is some parts of the world it is required to have call duration with two decimals precision. By default acc module does the timestamp in seconds. Thinking of adding an option to save the milliseconds, I see two option: - a new column to store the milliseconds part as integer - a new column to store the seconds.milliseconds as double For those using various billing engines, what would be easier to digest when rating the CDRs? There is already the option of doing db … [View More]

4 5

Re: [SR-Users] Default kamailio installation, syntax errors with Defined Values
by Gertjan Wolzak 11 Aug '11

11 Aug '11

Sorry, my bad.... Missing dependencies Regards, Gertjan Wolzak

1 0

Default kamailio installation, syntax errors with Defined Values
by Gertjan Wolzak 11 Aug '11

11 Aug '11

Hello, Just been installing Kamailio, version 3.1.x via Git, but when I use the default kamailio.cfg, Kamailio will not start and the debug gives the following errors. 0(25876) : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 285, column 29-35: syntax error 0(25876) : <core> [cfg.y:3330]: parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 285, column 29-35: Invalid arguments 0(25876) : <core> [cfg.y:3333]… [View More]

1 0

Using Kamailio to convert TCP to TLS
by aur.hoffmann＠free.fr 10 Aug '11

10 Aug '11

Hello, I would like to use Kamailio as a TCP <=> TLS convertor ? Do you think it's possible ? I have developed a software (which simulate a SIP phone) which can use UDP or TCP (not TLS). I need a SIP proxy to convert TCP to TLS. For example: UA => TCP OPTION (5060) => Kamailio => TLS OPTION (5061) => OXE UA <= TCP 200 OK (5060) <= Kamailio <= TLS 200 OK (5061) <= OXE Do you think Kamailio can do that ? Thanks in advance, Regards

3 2

$hu is not documented
by Juha Heinanen 10 Aug '11

10 Aug '11

xcap_server examples refer to pseudo variable $hu, which is not documented on pseudo variables wiki page: http://sip-router.org/wiki/cookbooks/pseudo-variables/devel -- juha

2 2

Cancel issue
by Carl Wagner 09 Aug '11

09 Aug '11

Hi, I am having an issue getting Kamailio to properly cancel a call. I initiate the call with an INVITE from Asterisk and then hang up. According to rfc3665 the call flow should be: 3.8. Unsuccessful No Answer Alice Proxy 1 Proxy 2 Bob | | | | | INVITE F1 | | | |--------------->| INVITE F2 | | | 100 F3 |--------------->|… [View More] INVITE F4 | |<---------------| 100 F5 |--------------->| | |<---------------| | | | | 180 F6 | | | 180 F7 |<---------------| | 180 F8 |<---------------| | |<---------------| | | | CANCEL F9 | | | |--------------->| | | | 200 F10 | | | |<---------------| CANCEL F11 | | | |--------------->| | | | 200 F12 | | | |<---------------| | | | | CANCEL F13 | | | |--------------->| | | | 200 F14 | | | |<---------------| | | | 487 F15 | | | |<---------------| | | | ACK F16 | | | 487 F17 |--------------->| | |<---------------| | | | ACK F18 | | | 487 F19 |--------------->| | |<---------------| | | | ACK F20 | | | |--------------->| | | In my case I only have one proxy - the Kamailio box, and the call is coming from Asterisk instead of Alice. The is the call flow that I am seeing: Asterisk Kamailio SIP_phone | | | | INVITE | | |--------------->| INVITE | | 100 |--------------->| |<---------------| 100 | | |<---------------| | | | | | 180 | | 180 |<---------------| |<---------------| | | CANCEL | | |--------------->| | | | CANCEL | | |--------------->| | 200 Canceling | | |<---------------| | | | 200 | | |<---------------| | | | | | | | | 487 | | |<---------------| | | ACK | | 487 |--------------->| |<---------------| | | ACK | | |--------------->| | | CANCEL | | |--------------->| | | 200 Canceling | | |<---------------| | | CANCEL | | |--------------->| | | 200 Canceling | | |<---------------| | It looks like the problem is that that "200 Canceling" has a To: tag and it shouldn't. ====================================== # cancel from Asterisk: U 2011/05/24 15:18:56.123714 3.3.3.3:5060 -> 2.2.2.2:5060 CANCEL sip:SIP_13034445555@2.2.2.2 SIP/2.0. Via: SIP/2.0/UDP 3.3.3.3:5060;branch=z9hG4bK51c9602a;rport. From: "+13032223333" <sip:+13032223333@3.3.3.3>;tag=as4c415d87. To: <sip:SIP_13034445555@2.2.2.2>. Call-ID: 605b8de40a05924177085d71154bda77(a)3.3.3.3. CSeq: 102 CANCEL. User-Agent: VerbalWorld. Max-Forwards: 70. Content-Length: 0. # 200 canceling from Kamailio to asterisk: U 2011/05/24 15:18:56.127349 2.2.2.2:5060 -> 3.3.3.3:5060 SIP/2.0 200 canceling. Via: SIP/2.0/UDP 3.3.3.3:5060;branch=z9hG4bK51c9602a;rport=5060. From: "+13032223333" <sip:+13032223333@3.3.3.3>;tag=as4c415d87. To: <sip:SIP_13034445555@2.2.2.2>;tag=4ed8ab9f3ed29a77613bb14b3431ff43-2f34. Call-ID: 605b8de40a05924177085d71154bda77(a)3.3.3.3. CSeq: 102 CANCEL. Server: kamailio (3.1.3 (i386/linux)). Content-Length: 0. ====================================== Why is kamialio adding a To: tag? Portion of kamailio.cfg ===================== ... route { ... route(WITHINDLG); ### only initial requests (no To: tag) from here on if (is_method("CANCEL")) { if (t_check_trans()) { xlog("L_INFO", "MAIN: Recieved Cancel, t_check_trans is true\n"); ... t_relay(); exit; } ... Thanks! Carl [View Less]

3 9

Modifying $rU after lookup()
by Efelin Novak 09 Aug '11

09 Aug '11

Hi Folks, I would like to ask how can I change the $rU (user part of uri) in multiple appended branches? In my scenario I do lookup("location") and after this I try to modify an username using the $rU variable. This works fine until there are several records in the location table for the given user (registered from different locations). In this case only one branch is changed and unchanged uri is sent to an another location. Is there a way to change it in all branches together? Thanks for … [View More]

5 7

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users