sr-users

sr-users@lists.kamailio.org

7 participants
37522 discussions

Installation Problem: : /usr/local/sbin/kamailio: not found
by Derrick Ding 16 Mar '11

16 Mar '11

Hi, All Yesterday I install Kamailio(3.1.x) by myself under a new Ubuntu server 10.04 environment. I got it from http://www.kamailio.org/pub/kamailio/3.1.2/bin/ kamailio-3.1.2_linux_i386.tar.gz <http://www.kamailio.org/pub/kamailio/3.1.2/bin/kamailio-3.1.2_linux_i38 6.tar.gz> I put all stuff under corresponding directory: /usr/local/sbin with bin file /usr/local/etc/kamailio with .cfg file /usr/local/lib/kamailio with lib file Based on http://www.kamailio.org/dokuwiki/doku.php/install:kamailio-3.1.x-from-gi t I create /etc/init.d/kamailio PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=/usr/local/sbin/kamailio NAME=kamailio DESC=kamailio HOMEDIR=/var/run/kamailio PIDFILE=$HOMEDIR/$NAME.pid DEFAULTS=/etc/default/kamailio RUN_KAMAILIO=no Also I create /etc/default/ kamailio I find a problem after when I run /etc/init.d/kamailio start, it says: root@aastra:/etc/init.d# /etc/init.d/kamailio start Not starting kamailio: invalid configuration file! -e /etc/init.d/kamailio: 168: /usr/local/sbin/kamailio: not found But the file is there: root@aastra:/etc/init.d# ls -l /usr/local/sbin/kamailio -rwxr-xr-x 1 root root 4103257 2010-07-01 12:16 /usr/local/sbin/kamailio root@aastra:/etc/init.d# /usr/local/sbin/kamailio bash: /usr/local/sbin/kamailio: No such file or directory I wonder if this /usr/local/sbin/kamailio is not for Ubuntu server 10.04 and cannot be run Thanks for help Derrick

2 3

major bug in auth module?
by Juha Heinanen 16 Mar '11

16 Mar '11

one sip ua sent this kind of authorization header: Authorization: Digest username="foo",realm="bar",uri="xxx",response="e439fa7438452da7d50690f2268be16f",nonce="4d8060d2000041b2430e64fe7ec681d8fb5709e9c72b8a01",qop=auth,cnonce="0004ccb0",nc=000060a2. and sr auth module didn't like it but emitted error message FIXME:check_nonce: bad nc value. i went and checked the code and found this: if (nc_enabled && (pf & NF_VALID_NC_ID) && auth->digest.nc.s && auth->digest.nc.len){ if (str2int(&auth->digest.nc, &nc)!=0){ /* error, bad nc */ ERR("FIXME:check_nonce: bad nc value %.*s\n", auth->digest.nc.len, auth->digest.nc.s); return 5; /* invalid nc */ } i.e., looks like it is using str2int to convert to nc value to int. the problem is that str2int only handles decimal strings, whereas nc value is a hex string. am i dreaming or what? -- juha

1 1

LCR Routes and memory allocations
by Graham Wooden 15 Mar '11

15 Mar '11

Hi there, I have now approximately 400,000 routes defined in my LCR table and I would like to make sure that I have enough memory allocated for it. I read somewhere (a non official Kamailio site) about PKG_MEM_POOL_SIZE and SHM_MEM_SIZE needing to be altered to handle the increased routes. System is dedicated for the Kamailio 1.5.5 install and has 4GB of RAM. Thoughts to what I need to change these values (or anything else) to accommodate? Thanks, -graham

5 6

Error: compile kamailio with STUN support
by Derrick Ding 15 Mar '11

15 Mar '11

Hi, All I met same problem when compile kamailio with STUN support. http://www.voipuser.org/forum_topic_18741.html /usr/include/bits/string3.h:83: warning: memset used with constant zero length parameter; this could be due to transposed parameters ser_stun.o: In function `add_fingerprint': /root/kamailio-3.0.1/ser_stun.c:890: undefined reference to `SHA1' ser_stun.o: In function `validate_fingerprint': /root/kamailio-3.0.1/ser_stun.c:973: undefined reference to `SHA1' collect2: ld returned 1 exit status make: *** [kamailio] Error 1 I search online that need link libssl -lssl But I don't know where to add this compile flag. The Makefile of this project is too complicated for me to understand. Any one can tell me how to I can fix this? By the way, I have install libssl. It's /usr/lib/libssl.so.0.9.8 Sincerely, Derrick

2 1

Q.850 Reason in CANCEL on Kamailio 3.0
by Jeremy McNamara 15 Mar '11

15 Mar '11

I am attempting to add a Reason header with Q.850 result codes. Unfortunately, this does not work: if (is_method("CANCEL")) { append_hf("Reason: Q.850; cause=16\r\n"); if (t_check_trans()) { t_relay(); } exit; } If I have to use 3.1.x, does it support sending Q.850 codes? Jeremy McNamara

2 4

Kamailio setup
by roman＠dmytriv.com 15 Mar '11

15 Mar '11

Hello everyone!!! What location I use for chrooted directory? Thanks in advance Roman

2 1

Re: [SR-Users] Call subscriber online
by Daniel-Constantin Mierla 15 Mar '11

15 Mar '11

Hello, shouldn't the call go to location service before relaying to subscriber B? Is B at a fix address an port and that is local host port 5060? Are you doing all in your computer for testing purposes, because otherwise an application bound to localhost (like could be the softphone B) cannot really communicate with the inter/intra-network? Cheers, Daniel On 3/11/11 4:50 PM, Stefano Larosa wrote: > > Hi, > > I'm new on Kamailio 3.0 > > This is the scenario I would like to build: > > 1 Subscriber A -> 2 kamailio -> 3 asterisk -> 4 Kamailio -> 5 > Subscriber B > > Everything is working fine until the last step > > This is the code that manage the call from asterisk to kamailio > > /if(is_method("INVITE") && (src_ip==80.169.xx.xx) )/ > > / {/ > > / route(TOPROXYUSER);/ > > / }/ > > And this is the code that should end the call the the subscriber > > route[TOPROXYUSER] { > > xlog("L_NOTICE", "$mi route[$rm][0] $fu > -> $ru START PROCESSING MESSAGE\n"); > > rewritehostport("127.0.0.1:5060"); > > if (is_method("BYE|CANCEL")) { > > route(FAIL_ONE); > > } else if (is_method("INVITE")){ > > route(RELAY); > > }; > > exit; > > } > > Thank you, > > Stivu. > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla http://www.asipto.com

2 1

Registrar module creates an extra branch
by Efelin Novak 15 Mar '11

15 Mar '11

Hi Folks, I have a problem with registrar module (I suppose). When A calls to B, is some specific situation, B receives two INVITEs. This mostly (not only) happens when one account is registered on two or more UAs. In this situation extra INVITE is sent only to the one that is second in the list (kamctl ul show ACCOUNT). kamctl ul show Alice: Contact:: <sip:orlvuzyd@192.168.28.72:52129 >;q=0;expires=1916;flags=0x0;cflags=0x40;socket=<udp:8.8.8.8:5060 >;methods=0xFFFFFFFF;received=<sip:8.8.8.8:52129>;user_agent=<Blink 0.2.5 (Linux)> Contact:: <sip:Alice@192.168.28.51:5060 >;q=;expires=3061;flags=0x0;cflags=0x40;socket=<udp:8.8.8.8:5060 >;methods=0x129F;received=<sip:8.8.8.8:5060 >;user_agent=<Linksys/PAP2T-3.1.15(LS)> My situation. 1. Alice calls to BOB. 2. kamailio looks up in location table for BOBs registrations 3. in DB there are two rows (two devices(linksys PAP2T and Blink(blink is second one))) 4. kamailio send 3 INVITES ( linksys, blink and blink). Every INVITE has different via.branch (Via: SIP/2.0/UDP 8.8.8.8;branch=z9hG4bKe2d7.009b1df2.1) (Via: SIP/2.0/UDP 8.8.8.8;branch=z9hG4bKe2d7.009b1df2.2) (Via: SIP/2.0/UDP 8.8.8.8;branch=z9hG4bKe2d7.009b1df2.3) All my registrar parameters are set to default. I have no idea whether this is a bug or my missconfiguration. Thanks for replies. Kind regards, Efelin Novak

2 2

usuarios para kamailio y asterisk
by M. ASUNCION MERINO RODRIGUEZ 14 Mar '11

14 Mar '11

Hola en la actualidad estoy montando un servidor kamailio que trabaja con un servidor asterisk. Entiendo que lo mejor seria que tanto kamailio como asterisk trabajaran con los mismos usuarios, por eso el servidor kamailio autentica los usuarios contra un servidor radius. Este servidor radius, acceder a un directorio ldap, para validar a los usuarios cuyo usuario es el login de correo y la contraseña correspondiente. Mi pregunta es, como puedo manejar usuarios como "login" si en asterisk existen usuarios creados como números de telefono? debería hacer que los usuarios de radius fueran numeros de telefono? Cualquier ayuda es bienvenida Gracias

1 0

Paging from asterisk to accounts with Multiple Registrations...
by Derrick Bradbury 14 Mar '11

14 Mar '11

Hi all... interesting problem... I am using kamailio as the registration server for a cluster of asterisk servers. I am allowing multiple registrations on the same account to allow for parallel forking on a normal call... The problem is set paging... when I send the page to the account that has multiple registrations, the parallel fork works properly and the first phone to respond gets "control" of the call. Unfortunately there is an auto answer field in the invite. So simple case: one account, two phones.. invite gets sent to both phones, both phones answer... BUT one phone grabs "control" of the call, and the other phone no longer receives any more commands... so it never hangs up as it doesn't receive a "BYE". Is there any way to turn off the parallel fork behavior, and keep sending all packets to both (or more) phones? Any thoughts are appreciated! Thanks, Derrick

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users