sr-users

sr-users@lists.kamailio.org

7 participants
37522 discussions

Re: [SR-Users] decimal fraction problem
by Daniel-Constantin Mierla 14 Mar '11

14 Mar '11

Hello, cc-ing to the mailing list is very important because even it is an email to show the previous answer was good, that will help other people with similar problem that search on web and read the mailing list archive to know the proposed solution worked and they can use it without asking again on mailing list if it was ok or not. Thanks, Daniel On 3/14/11 12:07 PM, 侯旭光 wrote: > got it > > thanks > > cheers > > 在 2011年3月14日下午5:22，Daniel-Constantin Mierla <miconda(a)gmail.com> 写道： >> Hello, >> >> are you using kamailio 3.1.x? If not, you have to upgrade, the >> $branch(...) variable was updated to be writable starting with this version. >> >> I played last week with it in a need of combining serial forking with >> parallel forking and all is ok with assigning values to $branch(...). >> >> Cheers, >> Daniel >> >> On 3/14/11 5:25 AM, 侯旭光 wrote: >>> sorry to bother again >>> >>> >>> $(branch(q)[-1]) = $var(q); >>> >>> this script line doesn't work and the pv $branch() aren't >>> writable,just readable . index -1 is not accessable either. >>> >>> if append_branch() function doesn't take the q value parameter,the >>> $branch(q) just return NULL (which I think is the default value >>> Q_UNSPECFIED=-1) >>> >>> I find a function set_ruri_q() in dset.c but I don't know how to call >>> it in the configure file. >>> >>> >>> 2011/2/23 Daniel-Constantin Mierla <miconda(a)gmail.com>: >>>> Hello, >>>> >>>> On 2/21/11 10:28 AM, 侯旭光 wrote: >>>> >>>> Hello >>>> I need to add q value while using function append_branch(),but the function >>>> only takes decimal fraction as the parameter. >>>> What if I want to use pv to add q value? >>>> The $var and $avp just have string and integer type. >>>> Thanks a lot! >>>> >>>> do: >>>> >>>> km_append_branch("$var(branchuri)"); >>>> $(branch(q)[-1]) = $var(q); >>>> >>>> $var(q) has to hold an integer value that represents the decimal fraction >>>> value multiplied with 100 (so if q should be 0.5, then $var(q) = 50). >>>> >>>> Cheers, >>>> Daniel >>>> >>>> -- >>>> Daniel-Constantin Mierla >>>> http://www.asipto.com >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> -- >> Daniel-Constantin Mierla >> http://www.asipto.com >> >> -- Daniel-Constantin Mierla http://www.asipto.com

1 0

change in list setup - default is now reply to list
by Henning Westerholt 14 Mar '11

14 Mar '11

Hello, for your information - i just did a small change in the mailling list configuration for sr-dev and sr-users, now all replies goes per default to the list instead of the sender. This should help to keep the discussion on the list, especially if new people join. :-) In the past a lot of "Please always include the list in your reply" reminders were necessary.. If you choose "reply to all" then the mail still goes to the list and the sender, so no change in this case. Regards, Henning

2 1

Siremis - Auto update dialplan on save?
by Russell Feeser 14 Mar '11

14 Mar '11

To Siremis Admin, I'm a bit of a php rookie, and even more of a noob with openbiz cubi, but I've burnt a day and a half trying to implement a new button on the SER Menu > Server Services > Dialplan List page, and curious if you could give some words of advice concerning my plight. Ideally, I would like dialplan to auto update the Kamailio mySQL database with the dp_reload feature; I am simply sick of bouncing Kamailio with a "kamctl restart" from the command line each time I implement a change to the dialplan in Siremis. I have successfully enabled this feature on the drop-down menu in SER Menu > Command Services > MI Commands, however, I don't want to have to navigate to the MI Commands page each time I wish to refresh dialplan. In siremisMICommands.xml, I was able to activate dp_reload with the following code: (taken from siremisMICommands.xml) <?xml version="1.0" standalone="no"?> <PluginService Name="siremisMICommands" Package="asipto" Class="siremisMICommands"> <MIConfig name="MIConfig" type="udp" mode="rich"> <Local name="local" address="127.0.0.1" port="8044" timeout="3.0"/> <Remote name="remote" address="127.0.0.1" port="8033"/> <MICommands> <cmd name="ps" title="List Processes" command="ps"/> <cmd name="uptime" title="Show Uptime" command="uptime"/> <cmd name="getstatsall" title="Get All Statistics" command="get_statistics all"/> <cmd name="which" title="Get All MI Commands" command="which"/> <cmd name="dp_reload" title="Reload Dailplan" command="dp_reload"/> <------ Code I added, WORKS! </MICommands> </MIConfig> </PluginService> Here's where I'm stuck: I can't seem to get a new button to implement dp_reload in the DialplanListForm.xml. I'm not sure if I need to write a function to call dp_reload, or if I can simply activate dp_reload from the DialplanListForm.xml. The code I have written creates a button on the SER Menu > Server Services > Dialplan List page, but thats as far as I've gotten. My code currently looks like this: (taken from DialplanListForm.xml) <Element Name="btn_refresh" Class="Button" Text="Activate" CssClass="button_gray_m" Description="Refresh dialplan in Kamailio without restarting Kamailio"> <EventHandler Name="dp_reload" Event="onclick" EventLogMsg="" Function="" ContextMenu="Activate"/> </Element> Anything you can say would be most helpful, as this is a feature I'm sure many using Siremis would appreciate having. Best, -- R. Z. Feeser 717.460.8095 www.RZFeeser.com www.NaturaGardens.com

2 1

pseudo variables available in on_reply route
by Asgaroth 14 Mar '11

14 Mar '11

Hi All, I have a requirement to perform some processing based on the source and destination addresses on a message in on_reply route. I can get source ip address using $si pseudo variable, but I cant seem to access the destination ($dd). Is there any way I can access destination ip/domain of message in on_reply route? Thanks for any tips.

2 1

14 Mar '11

Dear Sir, I have a difficulty to register a CISCO SPA 303 IP phone. I can register a Soft phone to the SER server by setting the Hold IP address, Proxy, account number.. But it is not working with the CISCO phone. Can you advice? Thanks, Gary

3 2

decimal fraction problem
by 侯旭光 14 Mar '11

14 Mar '11

Hello I need to add q value while using function append_branch(),but the function only takes decimal fraction as the parameter. What if I want to use pv to add q value? The $var and $avp just have string and integer type. Thanks a lot!

2 3

OPENSER MIB
by Stefan Tiedje 14 Mar '11

14 Mar '11

Hi, In the Kamailio OPENSER-MIB there is the counter "openserTotalNumFailedDialogSetups". This is a Counter32. The description is: "The total number of calls that failed with an error. The following codes define a failed call:" Question: * I'm looking for the corresponding counter to "openserTotalNumFailedDialogSetups" who counts successful Dialog setups of Counter32 type. Does it exist? * If not, does it exist a work around? * Where in the code can the new suggested counter be added? * Something else???? Suggestion for the new counter is a name like: "openserTotalNumSucceededDialogSetups". It has a counter32. Description: "The total number of calls that succeeded" I know that there are the counters openserCurNumDialogs, openserCurNumDialogsInProgress and openserCurNumDialogsInSetup but these are of Gauge type who only reflects the current situation. These Gauge counters can't be used together with a Counter32 counter. That don't mix. The calculation done for the counter "openserCurNumDialogsInProgress" should be used where every new dialog setup is added to the new suggested counter. A counter of 32 should cover a great deal of connections. These counters are usually read, if used, every 15 minutes or 1 hour. Rationale: The reason for the new counter is that a calculation between succeeded and failed dialog setups can be done and be used for SLA agreements. Without this, its hard to make any customer versus provider agreements. /Stefan PS. Ask if anything is unclear and I need an answer rapidly.

2 1

acc failed_transaction_flag and t_newtran()
by Juha Heinanen 12 Mar '11

12 Mar '11

in order to get invite requests accounted, it seems that accounting flags need to be set before t_newtran() is called. is there any way to unset the accounting flags after calling t_newtran()? for example, i would not like to account invites that result to 407 proxy authentication required. -- juha

2 4

pseudo variables available in on_reply route
by Asgaroth 11 Mar '11

11 Mar '11

5 8

Call subscriber online
by Stefano Larosa 11 Mar '11

11 Mar '11

Hi, I'm new on Kamailio 3.0 This is the scenario I would like to build: 1 Subscriber A -> 2 kamailio -> 3 asterisk -> 4 Kamailio -> 5 Subscriber B Everything is working fine until the last step This is the code that manage the call from asterisk to kamailio if(is_method("INVITE") && (src_ip==80.169.xx.xx) ) { route(TOPROXYUSER); } And this is the code that should end the call the the subscriber route[TOPROXYUSER] { xlog("L_NOTICE", "$mi route[$rm][0] $fu -> $ru START PROCESSING MESSAGE\n"); rewritehostport("127.0.0.1:5060"); if (is_method("BYE|CANCEL")) { route(FAIL_ONE); } else if (is_method("INVITE")){ route(RELAY); }; exit; } Thank you, Stivu.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users