sr-users

sr-users@lists.kamailio.org

7 participants
37522 discussions

UC Expo 2011, London, next week
by Daniel-Constantin Mierla 28 Feb '11

28 Feb '11

Hello, I will be visiting the first day of UC Expo in London (http://www.ucexpo.co.uk/), Tuesday, March 8. If you are going to be there and want to meet for a chat about Kamailio & VoIP, drop me an email. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

1 0

Re: [SR-Users] Unable to start Siremis
by jack＠4voice.net 28 Feb '11

28 Feb '11

1 0

Re: [SR-Users] Unable to start Siremis
by hb 28 Feb '11

28 Feb '11

Hi jack： I got the same problem with you. I know little about apache and HTML, would you tell me how to configuration apache specific. Thanks a lot. haibo huang

1 0

how to route to new URI on failure
by x-kamailio＠sidell.org 27 Feb '11

27 Feb '11

I'm trying to route failed calls to a voicemail URI. The failure route couldn't be simpler: failure_route[FAIL_ONE] { if (t_is_canceled()) { exit; } if( t_check_status("486|408") { append_branch( "sip:foo@2.2.2.2"); t_relay(); } } But, it doesn't work. For example, let's say the initial INVITE resolves to a local device "me(a)1.1.1.1". This works fine, and the phone rings. After a timeout, the failure_route executes. The branch "foo(a)2.2.2.2" gets appended, and kamailio sends a new INVITE, but instead of determining the correct proxy for the new address, it sends the INVITE, with the new URI, to the device that original received the INVITE, "me(a)1.1.1.1". Obviously, this doesn't work. I've been able to force kamailio to route the call correctly by modifying failure_route[ to use t_relay_to_udp() as follows: failure_route[FAIL_ONE] { if (t_is_canceled()) { exit; } if( t_check_status("486|408") { append_branch( "sip:foo@2.2.2.2"); t_relay_to_udp( "2.2.2.2", "5060"); } } But, it seems like kamailio should figure what where to send the new INVITE itself. What am I doing wrong? -- Mark Sidell Partner Forte, Inc. 919-942-7068 fax 919-969-2844 www.forteinc.com

2 2

Can only tranfer (refer) a call one time
by niklas rehnberg 27 Feb '11

27 Feb '11

Hi, Have following issue: Alice calling Bob. Bob make call transfer to Charlie (works fine) Charlie transfer Alice to David. (the call break) Why is not possible to transfer the call more than one time? Is it any parameters? My ITSP use SER together with Cisco MGW. BR Niklas

4 4

Lcr Command Disabled
by Amit Nepal 25 Feb '11

25 Feb '11

Lcr is working fine but Why would i get LCR commands disabled ? kamctl lcr reload ERROR: command disabled-- Thank You Amit Nepal Systems Administrator Phoenix Internet Phone: 602-385-0731 602-234-0917#112 http://www.phoenixinternet.net

3 8

Rtpproxy newbie question
by Marc 25 Feb '11

25 Feb '11

Hi, I installed a kamailio from the debian repository, i use the default configuration. The only enable the tcp and tls transport modes, and configured mysql login. Everyting seems to be working fine. I would need now to configure rtprpoxy, but i just cant make it work. My goal is to force rtpproxy for all calls. Any help is highly appreciated!! Thank you Marc Rtpproxy is installed and seems to be running: This is my rtpproxy configuration: ------------ # Defaults for rtpproxy # The control socket. #CONTROL_SOCK="unix:/var/run/rtpproxy/rtpproxy.sock" # To listen on an UDP socket, uncomment this line: CONTROL_SOCK=udp:127.0.0.1:22222 LISTEN_ADDR=[external_ip] # Additional options that are passed to the daemon. EXTRA_OPTS="-l ${LISTEN_ADDR}" /usr/sbin# ------------- It seems to be running: ----------- /etc/init.d# ./rtpproxy start Starting RTP relay: rtpproxy. /etc/init.d# netstat -an|grep 22222 udp 0 0 127.0.0.1:22222 0.0.0.0:* /etc/init.d# ----------------- Here is my kamailio configuration, default as is installed: ------------------------------------------- #!KAMAILIO # # Kamailio (OpenSER) SIP Server v3.1 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users(a)lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: # - define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!define ""mysql:[my_mysql_db_config]"" "mysql://openser:openserrw@localhost/openser" #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### #!ifdef WITH_DEBUG debug=2 log_stderror=no #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_DAEMON fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ disable_tcp=no /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ listen=udp:[external_ip]:5060 listen=tcp:[external_ip]:5062 listen=tls:[external_ip]:5061 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 port=5062 tls_port_no=5061 enable_tls=yes #!ifdef WITH_TLS enable_tls=yes #!endif ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting #pstn.gw_ip = "" desc "PSTN GW Address" #!endif ####### Modules Section ######## # set paths to location of modules #!ifdef LOCAL_TEST_RUN mpath="modules_k:modules" #!else mpath="/usr/lib/kamailio/modules_k/:/usr/lib/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" loadmodule "tls.so" modparam("tls", "config", "/etc/kamailio/tls.cfg") #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", ""[my_mysql_db_config]"") modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", "[my_mysql_db_config]") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", ""[my_mysql_db_config]"") modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", "[my_mysql_db_config]") modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", "[my_mysql_db_config]") modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", "[my_mysql_db_config]") # use caching modparam("domain", "db_mode", 1) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", "[my_mysql_db_config]") # ----- presence_xml params ----- modparam("presence_xml", "db_url", "[my_mysql_db_config]") modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:22222") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@[mydomain]") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/etc/kamailio/tls.cfg") modparam("tls", "tls_debug", 10) #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route route { # per request initial checks route(REQINIT); # NAT detection route(NAT); # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); route(RELAY); } route[RELAY] { #!ifdef WITH_NAT if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if (isflagset(FLT_NATS) || isbflagset(FLB_NATB)) { route(RTPPROXY); } #!endif /* example how to enable some additional event routes */ if (is_method("INVITE")) { #t_on_branch("BRANCH_ONE"); t_on_reply("REPLY_ONE"); t_on_failure("FAIL_ONE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } route(RELAY); } else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP registrations route[REGISTRAR] { if (is_method("REGISTER")) { if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging setbflag(FLB_NATSIPPING); } if (!save("location")) sl_reply_error(); exit; } } # USER location service route[LOCATION] { #!ifdef WITH_ALIASDB # search in DB-based aliases alias_db_lookup("dbaliases"); #!endif if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } } # Presence server route route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("$td", "subscriber")) { www_challenge("$td", "0"); exit; } if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { #!ifdef WITH_IPAUTH if(allow_source_address()) { # source IP allowed return; } #!endif # authenticate if from local subscriber if (from_uri==myself) { if (!proxy_authorize("$fd", "subscriber")) { proxy_challenge("$fd", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } } consume_credentials(); # caller authenticated } else { # caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (!uri==myself) { sl_send_reply("403","Not relaying"); exit; } } } #!endif return; } # Caller NAT detection route route[NAT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; } # Routing to foreign domains route[SIPOUT] { if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); } # Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(FLT_NATS) || isbflagset(FLB_NATB)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif } # Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif if (t_is_canceled()) { exit; } # uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##} # uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} }

2 2

postgres in Kamailio 3.1.2
by Bruno Bresciani 24 Feb '11

24 Feb '11

Hi, I configure the Kamailio 3.1.2 with postgres but I cann't start. In the log file is generated the following error: ** ERROR: load_module: could not open module </home2/local/kamailio/lib/kamailio/modules/db_ postgres.so>: /home2/local/kamailio/lib/kamailio/modules/db_postgres.so: undefined symbol: PQdescribePrepared Why this error is generated? Best Regards

2 1

tcp_persistent_flag
by Bruno Bresciani 24 Feb '11

24 Feb '11

Hi, there is in kamailio 3.1.2 some exported parameter that work as tcp_persistent_flag paramenter? I want to keep alive the connections TCP/TLS as long as the register contact is valid. Best Regards

2 1

dialplan regex confusion
by thrillerbee 24 Feb '11

24 Feb '11

I'm using the following in dialplan: id | dpid | pr | match_op | match_exp | match_len | subst_exp | repl_exp | attrs ----+------+----+----------+----------------------------------------+-----------+----------------------------------------------+----------+---------------------------------- 3 | 3 | 0 | 1 | ^30\d{3}#\+?1?[2-9]\d{2}[2-9]\d{6}$ | 0 | ^(30\d{3}#)(\+?1?)([2-9]\d{2}[2-9]\d{6}$) | \11\3 | normalize prefixed domestic A R-URI goes in as 30001#12345678910 It comes out as 30001#*\1*12345678910 Can someone help me understand why? I'd expect to be exactly what it was originally but for some reason '\1' is thrown in the middle... Thanks, Ryan

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users