sr-users

sr-users@lists.kamailio.org

22 participants
37533 discussions

Record-Route advertised per branch
by Ilie Soltanici 17 Jun '22

17 Jun '22

Hello, Is there any way to advertise a different IP Address in the Record-Route header individually per branch? I have a setup here - where Kamailio is listening on 2 different interfaces: Local IP and External IP. At the moment if the packet is coming through the internal interface - I'm checking where is it going to and based on that I'm setting the Record-Route header accordingly - and everything works well, except when I have multiple branches: one going through the internal interface and … [View More]

4 7

RTPengine in Debian
by Richard Fuchs 17 Jun '22

17 Jun '22

HI all, Just a quick heads up that RTPengine is now available in Debian sid/unstable mainline repositories. Big thanks to our own Victor Seva and Guillem Jover for making this possible. Cheers

4 4

set/add_contact_alias() difference
by ZZ Wave 17 Jun '22

17 Jun '22

Playing around with WSS support: if (nat_uac_test(64)) { force_rport(); ...... if (!add_contact_alias()) { xinfo("Error aliasing contact <$ct>\n"); sl_send_reply("400", "Bad Request"); exit; } set_contact_alias() throws this error on ACK without Contact, add_contact_alias() doesn't (and thats OK). Is this the expected behavior?

2 1

Re: [SR-Users] Callback for TM?s "fr_inv_timer" ?
by Antonio Couto 15 Jun '22

15 Jun '22

I will try this, thanks a lot for your help. regards. On Wed, Jun 15, 2022 at 5:43 PM Alex Balashov <abalashov(a)evaristesys.com> wrote: > Setting t_on_failure("FAILURE_ROUTE") before t_relay(), given a route > block failure_route[FAILURE_ROUTE], as you are doing, should work. > > -- > Alex Balashov | Principal | Evariste Systems LLC > > Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) > Web: http://www.evaristesys.com/, http://www.csrpswitch.com/ > > &… [View More]

1 0

terminate a call on 183 state
by Antonio Couto 15 Jun '22

15 Jun '22

Someone know how to terminate a call on TM module from a external application, http, websocket, udp or using other modules when the call on 183 state? I am making a answering machine detection analising audio from RTPEngine recording daemon , but i need to disconnect the call before is anwered byt remote side. Kamailio INVITE >> Destination << 100 trying << 183 session progress I need to comand Kamailio to drop this call … [View More]

2 2

Re: [SR-Users] Callback for TM?s "fr_inv_timer" ?
by Antonio Couto 15 Jun '22

15 Jun '22

Thanks for your support, I am trying to do this but to be honest I don't know how to arm the failure route for this case of "fr_inv_timer". When I received reply 183 I use t_set_fr() function to set the new value for "fr_inv_timer", do far so good, but I never received failure_route[0] when Kamailio terminate the call sending 408, even calling like this: t_on_failure("0"); t_relay(); I can't find on documentation how to do this. Thanks a lot

1 0

Callback for TM´s "fr_inv_timer" ?
by Antonio Couto 14 Jun '22

14 Jun '22

There some way to set a callback route for TM´s "fr_inv_timer" ? I want to receive this callback when its fires and before Kamailio send 408 Request Timeout to the caller ? I tryed every callback available but I think I missing something or I will need to implement on TM module. Thanks in advance

2 1

jsonrpc with many methods not found
by Joseph Goettgens 14 Jun '22

14 Jun '22

Hi, I think I have not yet understood how jsonrpc needs to be configured. In kamcli I can issue the cmd "ul show" and I get a valid reply. When I print "domain list" I get error: code: 500 message: Method Not Found id: 6897 jsonrpc: '2.0' The same applies to JSONRPC Commands with Siremis. Some commands work, others are not found. Do I need some special configuration?

1 0

Kamailio eats pkg mem, but where?
by Sebastian Damm 14 Jun '22

14 Jun '22

Hi, we have some Kamailio instances running (currently latest 5.4 release), and we need to restart it from time to time. We have a grafana graph showing the pkg memory usage of one random tcp listener, and it increases slowly over time. Config is pure python KEMI. A mem dump directly after restarting Kamailio says this: SipSeppBook22:tmp sdamm$ grep alloc pkgmem_before.log | awk '{ print substr( $0, 16, length($0) ) }' | sort | uniq -c | sort -k1n | tail -10 16 sipproxy qm_status(): … [View More] alloc'd from core: core/re.c: subst_parser(301) 31 sipproxy qm_status(): alloc'd from core: core/sr_module.c: load_module(436) 31 sipproxy qm_status(): alloc'd from core: core/sr_module.c: register_module(236) 31 sipproxy qm_status(): alloc'd from core: core/sr_module.c: register_module(253) 40 sipproxy qm_status(): alloc'd from core: core/pvapi.c: pv_init_buffer(2139) 58 sipproxy qm_status(): alloc'd from core: core/cfg.lex: pp_define(1827) 133 sipproxy qm_status(): alloc'd from core: core/rpc_lookup.c: rpc_hash_add(101) 162 sipproxy qm_status(): alloc'd from core: core/counters.c: cnt_hash_add(339) 211 sipproxy qm_status(): alloc'd from core: core/cfg.lex: addstr(1448) 265 sipproxy qm_status(): alloc'd from core: core/pvapi.c: pv_table_add(236) And after running for some weeks, the same dump looks like this: SipSeppBook22:tmp sdamm$ grep alloc prod_pkgmem.log | awk '{ print substr( $0, 16, length($0) ) }' | sort | uniq -c | sort -k1n | tail -10 31 ifens5 qm_status(): alloc'd from core: core/sr_module.c: register_module(253) 40 ifens5 qm_status(): alloc'd from core: core/pvapi.c: pv_init_buffer(2139) 59 ifens5 qm_status(): alloc'd from core: core/cfg.lex: pp_define(1827) 133 ifens5 qm_status(): alloc'd from core: core/rpc_lookup.c: rpc_hash_add(101) 161 ifens5 qm_status(): alloc'd from core: core/counters.c: cnt_hash_add(339) 203 ifens5 qm_status(): alloc'd from core: core/cfg.lex: addstr(1448) 265 ifens5 qm_status(): alloc'd from core: core/pvapi.c: pv_table_add(236) 686 ifens5 qm_status(): alloc'd from core: core/pvapi.c: pv_parse_format(1173) 694 ifens5 qm_status(): alloc'd from htable: ht_var.c: pv_parse_ht_name(158) 707 ifens5 qm_status(): alloc'd from core: core/pvapi.c: pv_cache_add(349) I know, currently there are a few lines in the code which look like this: self.instance_name = KSR.pv.get("$sht(pbxdata=>ip.%s)" % (ip,)) This has been an issue in the past and I have replaced the code with something like this: KSR.pv.sets("$var(tmpInstanceIp)", ip) self.instance_name = KSR.pv.get("$sht(pbxdata=>ip.$var(tmpInstanceIp))") However, even after changing this, the memory still grows slowly but steadily. The usage scenario is TLS-only on one side (clients) and TCP-only on the other side (pbxes). Does anybody have a hint for me how to debug this? Looks like there's a lot of pv stuff in the memory, but I don't really know where. Thanks for any hints, Sebastian [View Less]

2 1

Re: [SR-Users] Hangup a call after a certain time from 183
by Antonio Couto 14 Jun '22

14 Jun '22

Thanks a lot I will try this options, sorry, I am new on Users Mailing List, I think that´s is not right way to make a response. regards.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users