sr-users

sr-users@lists.kamailio.org

42 participants
37518 discussions

Retrieve last via IP from SIP MEssage
by Adarsh Chauhan 14 Jan '22

14 Jan '22

Hi All, I have tried couple of methods to retrieve last via IP of SIP message but failed to retrieve it, trying to retrieve the source - @hf_value.via[-1].host, it simply prints the exact text back @hf_value.via[-1].host - $sel((a)hf_value.via[-1]) it doest give the IP but the entire via value SIP/2.0/TCP 172.31.30.144;branch=z9hG4bKf8bd.753341d2000000000000000000000000.0.host @via[-1].host it also simply prints the exact text back @via[-1].host Regards, Adarsh Chauha

2 1

EVAPI workload allocation across processes
by Alex Balashov 13 Jan '22

13 Jan '22

Hi, Given several EVAPI worker processes: modparam("evapi", "workers", 4) # kamcmd -s /run/kamailio/kamailio_ctl ps | fgrep -i evapi 539257 EvAPI Dispatcher 539258 EvAPI Worker 539259 EvAPI Worker 539260 EvAPI Worker 539261 EvAPI Worker How should one understand the way that the EVAPI workload is allocated among them? My best guess is that the EvAPI dispatcher process is the sole accept()or of client connections and the place where all relaying to client connections is done, regardless of their number, and that the ‘workers’ represent an async pool of processes in which TM transactions can be resumed or other work can be done when an outside caller sends a message to the dispatcher. However, the documentation[1] is a little vague on the meaning of the ‘workers’ modparam: "Number of worker processes to be started to handle incoming messages from remote applications.” Or maybe it’s not. Just wanted to confirm that my understanding is correct. Thanks! — Alex [1] https://kamailio.org/docs/modules/5.5.x/modules/evapi.html#evapi.p.workers -- Alex Balashov | Principal | Evariste Systems LLC Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

2 3

Reverse Kamailio Dispatcher order
by Adarsh Chauhan 12 Jan '22

12 Jan '22

Hi All, I was looking for a way where i could reverse the order of priority set on destinations in dispatcher file. for eg: if i have the following file: 1 sip:10.252.168.41:5060;transport=tcp 0 5 # (US) 1 sip:10.252.168.42:5060;transport=tcp 0 4 # (US) 1 sip:10.252.168.43:5060;transport=tcp 0 3 # (EU) 1 sip:10.252.168.44:5060;transport=tcp 0 2 # (EU) I wanted to use top to bottom when in US region and bottom to top when in EU region. One option is to make another set, however that will force Kamailio to send ping (OPTIONS) twice when probing. Regards, Adarsh Chauhan

4 4

Suggestion on receiving AAR
by Jyoti Bansal 10 Jan '22

10 Jan '22

Hello all, We are trying to connect kamailio ims to a pcrf, connection is successful. Whenever we register through bhoghe client , we receive AAR on pcrf from kamailio ims(pcscf), so just need a suggestion can we disable that till we receive invite from the soft phone? Can anyone help on this? Thanks, Jyoti bansal -- Confidentiality Notice and Disclaimer: This email (including any attachments) contains information that may be confidential, privileged and/or copyrighted. If you are not the intended recipient, please notify the sender immediately and destroy this email. Any unauthorized use of the contents of this email in any manner whatsoever, is strictly prohibited. If improper activity is suspected, all available information may be used by the sender for possible disciplinary action, prosecution, civil claim or any remedy or lawful purpose. Email transmission cannot be guaranteed to be secure or error-free, as information could be intercepted, lost, arrive late, or contain viruses. The sender is not liable whatsoever for damage resulting from the opening of this message and/or the use of the information contained in this message and/or attachments. Expressions in this email cannot be treated as opined by the sender company management – they are solely expressed by the sender unless authorized.

2 1

Call Preservation Mode in Kamailio
by varun pratapsingh 10 Jan '22

10 Jan '22

Happy New Year 2022 Everyone. Wish you a lot of innovation this year! I was just curious to know if any of us had handled the mid-call failures using the Kamailio. I am writing a SIP Client to handle the failures by using the DNS SRV based failover and Fallback approach where I am using two Kamailio instances as Outbound Proxy resolved by DNS SRV lookup. Everything is fine except for on-going calls. How to handle the mid-call failovers? Is there any way in Kamailio like Call Preservation mode or something? Any suggestions or ideas to handle midcall failover so that if a current Outbound Proxy goes down then all the ongoing calls can be seamlessly routed through another Kamailio (secondary). Thanks and Regards Varun

3 2

Kamailio call flows with Asterisk
by Nauman Sulaiman (SESSIONTALK) 05 Jan '22

05 Jan '22

Hi, We are using Asterisk as a PBX with users directly registered to Asterisk and Asterisk registering to SIP trunks. We are now looking to put Kamailio in front of Asterisk to handle SIP registrations from the SIP clients. In a ‘typical’ architecture should we keep the SIP trunk registrations on Asterisk or is Kamailio used for this? We want to keep Asterisk as the RTP proxy so we don’t want a call setup by Kamailio with RTP then going direct between user agents. Regards Nauman

3 2

Calling t_relay([host, port]) with variables
by Nick J 05 Jan '22

05 Jan '22

Hi all, I've been banging my head on the table with this one and hoping someone has some insight here. I'm trying to use a variable as the host & port input in t_relay() - t_relay(host, port) This works fine if statically set: t_relay("10.0.1.1", "5060"); But if I change the host or the port to a variable like this: $avp(destip) = "10.0.1.1"; $avp(dstport) = "5060"; t_relay($avp(destip), $avp(dstport)); Then Kamailio fails to start, calling out the t_relay line: kamailio: CRITICAL: <core> [core/cfg.y:3686]: yyerror_at(): parse error in config file /etc/kamailio/kamailio-routelogic.cfg, line 62, column 35: bad command I get the same behavior with pseudovariables and vars as well: $var(destip) = "10.0.1.1"; $var(dstport) = "5060"; t_relay($var(destip), $var(dstport)) Any tips or pointers would be much appreciated. Thanks! Nick

4 3

Features of Kamailio as SBC
by Nattha Vudhiprasittipol 04 Jan '22

04 Jan '22

Hello I would like to know all the feature lists of Kamailio as SBC. Could you please send me the document? I cannot find it on the website. Best regards Nattha Vudhiprasittipol Product Development Engineer Creaturelab Network Solution Co.,Ltd 357 Charansanitwong Rd., Bang-Bamru, Bangphlat, Bangkok 10700, THAILAND Email: nattha.v(a)creaturelab.co.th Website: www.creaturelab.co.th

7 19

Recommendation for compatible IMS soft phones
by Ashay Matekar 04 Jan '22

04 Jan '22

Hi Team, We were trying to test a call flow with Kamailio IMS that requires preconditio. Do you know any free or paid IMS softphones that support preconditio and are compatible with Kamailio IMS. -- *Thanks and Regards,* *Ashay Matekar* Associate Manager Engineering | +91 932446823 Great Software Laboratory | www.gslab.com LinkedIn <https://www.linkedin.com/company/gs-lab> | Twitter <https://twitter.com/_gslab> | Email Disclaimer <https://www.gslab.com/privacy-policy/#email-disclaimer> -- Confidentiality Notice and Disclaimer: This email (including any attachments) contains information that may be confidential, privileged and/or copyrighted. If you are not the intended recipient, please notify the sender immediately and destroy this email. Any unauthorized use of the contents of this email in any manner whatsoever, is strictly prohibited. If improper activity is suspected, all available information may be used by the sender for possible disciplinary action, prosecution, civil claim or any remedy or lawful purpose. Email transmission cannot be guaranteed to be secure or error-free, as information could be intercepted, lost, arrive late, or contain viruses. The sender is not liable whatsoever for damage resulting from the opening of this message and/or the use of the information contained in this message and/or attachments. Expressions in this email cannot be treated as opined by the sender company management – they are solely expressed by the sender unless authorized.

2 1

Catching Register 200 OK, then using it to validate other packets.
by Richard Edmands 04 Jan '22

04 Jan '22

Hey Kamailio Users, I've written a TLS-UDP gateway. It works well, but I want to reduce the internet noise it pushes through. I have an idea on what I'd like to try. Wondering if it would be possible to catch the Register 200 OK, store it and then when receiving packets it future to then validate them against the data? I've managed to capture a 200 OK, but the save("location") function says it will return it's own 200 OK which isn't the plan since we just want to capture the location. Anyone done something similar and got some working example code? Is this a bad idea for some reason?

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users