sr-users

sr-users@lists.kamailio.org

42 participants
37518 discussions

tcp timeout in kamailio
by Alexander Kudrevatykh 01 Apr '21

01 Apr '21

Hi. Is there an option for tcp timeout in kamailio? In my setup we have tcp peers and kamailio pings them every 5 seconds, but when tcp session stucks kamailio not close this session for 15 minutes. I tried many tcp options kamailio supports, but any of them helps. I think kamailio can use TCP_USER_TIMEOUT on linux to detect such tcp sessions and reestablish failed connections?

2 1

dispatcher algorithm 11, no more than 25 hosts in group for proper distribution
by Ivan Matvieiev 31 Mar '21

31 Mar '21

Hello Community, There is a module dispatcher and sharing algorithm 11 that features the ability to redistribute load when the host is enabled or disabled that is quite valuable for me. In the test lab I faced unexpected behavior: - when I add to group <=25 hosts algorithm behaves as per description. - when a group includes 26 or more hosts, and 100 calls are done for instance, then about 25 go to the first host and 75 are distributed among the rest of hosts. Expected behavior: all hosts of the group having the same rweight value must receive the same amount of calls no mater what number of hosts is in the group. Could you please to help to figure out what is wrong and why when the dispatcher group consists of 26+ hosts dispatching algorithm 11 behaves differently than when group consists of 25 or less of hosts? Some configuration notes: # module configs modparam("dispatcher", "list_file", "/etc/kamailio/dispatcher.list") modparam("dispatcher", "flags", 2) modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_probing_threshold", 3) modparam("dispatcher", "ds_inactive_threshold", 10) modparam("dispatcher", "ds_probing_mode", 3) modparam("dispatcher", "ds_ping_interval", 10) modparam("dispatcher", "ds_ping_reply_codes", "501,403,404,400,200") modparam("dispatcher", "ds_ping_from",DS_PING_FROM_PARAM) modparam("dispatcher", "use_default", 0) # dispatching algorithm call if ( ds_is_from_list("101")) { sl_send_reply("100","My calls"); ds_select_dst("100", "11"); return; } # dispatcher list group config 100 sip:10.60.27.123:7000 0 10 rweight=50 100 sip:10.60.27.123:7001 0 10 rweight=50 100 sip:10.60.27.123:7002 0 10 rweight=50 100 sip:10.60.27.123:7003 0 10 rweight=50 100 sip:10.60.27.123:7004 0 10 rweight=50 100 sip:10.60.27.123:7005 0 10 rweight=50 100 sip:10.60.27.123:7006 0 10 rweight=50 100 sip:10.60.27.123:7007 0 10 rweight=50 100 sip:10.60.27.123:7008 0 10 rweight=50 100 sip:10.60.27.123:7009 0 10 rweight=50 100 sip:10.60.27.123:7010 0 10 rweight=50 100 sip:10.60.27.123:7011 0 10 rweight=50 100 sip:10.60.27.123:7012 0 10 rweight=50 100 sip:10.60.27.123:7013 0 10 rweight=50 100 sip:10.60.27.123:7014 0 10 rweight=50 100 sip:10.60.27.123:7015 0 10 rweight=50 100 sip:10.60.27.123:7016 0 10 rweight=50 100 sip:10.60.27.123:7017 0 10 rweight=50 100 sip:10.60.27.123:7018 0 10 rweight=50 100 sip:10.60.27.123:7019 0 10 rweight=50 100 sip:10.60.27.123:7020 0 10 rweight=50 100 sip:10.60.27.123:7021 0 10 rweight=50 100 sip:10.60.27.123:7022 0 10 rweight=50 100 sip:10.60.27.123:7023 0 10 rweight=50 100 sip:10.60.27.123:7024 0 10 rweight=50 Kamailio version: kamailio -v version: kamailio 5.4.4 (x86_64/linux) e16352 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: e16352 compiled on 15:56:46 Feb 15 2021 with gcc 4.8.5 System info CentOS Linux release 7.7.1908 (Core) Linux test-carrier-1.loc 3.10.0-1062.4.1.el7.x86_64 #1 SMP Fri Oct 18 17:15:30 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

3 3

communication between two Kamailio
by Gustavo Monteiro 31 Mar '21

31 Mar '21

Hello, I need to do the simple communication between two Kamailio, ex: [Side A - K1 (10.0.0.0/24)- UE numbers 500] <----------> [Side B - K2 (192.168.0.0/24) UE numbers 400]. I already looked in the documentation, and I was surprised that I didn't find anything like that. I don't know which module or configuration to use. Thanks Gustavo (BR) Legal Disclaimer : The information contained in this message may be privileged and confidential. It is intended to be read only by the individual or entity to whom it is addressed or by their designee. If the reader of this message is not the intended recipient, you are on notice that any distribution of this message, in any form, is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete or destroy any copy of this message!

2 1

How to Play RBT With Media Server
by amitsharma＠coraltele.com 30 Mar '21

30 Mar '21

Dear Team, I am using SBC as proxy server and I am using Freeswitch for providing RBT/MOH. Please guide how can I play RBT from Freeswitch while using SBC as proxy server. Thanks & Regards, Amit Sharma (Sr. Team Leader) (An ISO 9001:2008 company) Mobile: <tel:9891612004> tel:9891612004 PH: +91 120 2595870 Ext.: <tel:870> tel:870 Email : <mailto:amitsharma@coraltele.com> amitsharma(a)coraltele.com Web : <blocked::http://www.coraltele.com> www.coraltele.com

4 3

Strange behavior with $T_branch_idx in failure_route
by Victor Litvinov 25 Mar '21

25 Mar '21

Hello. We faced an issue that $T_branch_idx called from failure_route returned a strange result. Few words about our setup. We use branch indexes like key in avp when we store via-branch value for rtpengine. route[RTPMANAGE] ... if ( is_request() and is_method("INVITE") and !has_totag() and t_is_branch_route() ) { $avp(viabranch$T_branch_idx) = $branch_str; } $avp(extra_branch_id) = $avp(viabranch$T_branch_idx); $var(rtpkey) = $var(rtpkey) + " via-branch=extra"; ...... rtpengine_manage($var(rtpkey)); Call this route in branch_route and in failure_route. In branch_route T_branch_idx is 0, in failure_route is 1. In documentation: the index (starting with 1 for the first branch) of the branch for which is executed the branch_route[]. If used outside of branch_route[] block, the value is '0'. But in source code behavior is different. (modules/tmx/t_var.c:480): for BRANCH_FAILURE_ROUTE and BRANCH_ROUTE it is idx = tcx->branch_index, but for FAILURE_ROUTE it is idx = t->nr_of_outgoings + nr_branches; Can you describe why for failure_route it is different and what we can do in our case? And can you update documentation for this variable if it is wrong?

2 1

Using sngrep for visualising encrypted SIP traffic
by Ovidiu Sas 24 Mar '21

24 Mar '21

Hello all, Here's a quick recipe to ease the troubleshooting of encrypted SIP traffic: https://voipembedded.wordpress.com/2021/03/22/troubleshooting-kamailio-encr… Regards, Ovidiu Sas -- VoIP Embedded, Inc. http://www.voipembedded.com

3 4

SDPOPs questions
by Gerry | Rigatta 23 Mar '21

23 Mar '21

Hi, The behaviour of the sdpops module is not fully clear to me. Lets say in the INVITE contains in the m= line the payloads 0 99 but has no a= line for codec 0 / PCMU, Would the sdp_keep_codecs_by_name(“PCMU”) keep PCMU ? What about the case that the INVITE contains in the m=line only the payload 99 but shows an additional a=line for codec 0 / PCMU. Would the sdp_keep_codecs_by_name(“PCMU”) keep PCMU ? If yes, would the extra mtype parameter prevent that? e.g. sdp_keep_codecs_by_name(“PCMU”, mtype) What happens when several m= lines are present? Does sdp_keep_codecs_by_name consider all m=lines ? Are the treated separately? What happens to payloads which are not in the hard-coded list in sdpops_data.c ? Can they be used with the sdpops functions? Thanks for your hints. Best Gerry codecsmap_t sdpops_codecsmap_table[] = { { {"PCMU", 4}, {"0", 1} }, { {"GSM", 3}, {"3", 1} }, { {"G723", 4}, {"4", 1} }, { {"DVI4", 4}, {"5,6,16,17", 9} }, { {"LPC", 3}, {"7", 1} }, { {"PCMA", 4}, {"8", 1} }, { {"G722", 4}, {"9", 1} }, { {"L16", 3}, {"10,11", 5} }, { {"QCELP", 5}, {"12", 2} }, { {"CN", 2}, {"13", 5} }, { {"MPA", 3}, {"14", 2} }, { {"G728", 4}, {"15", 2} }, { {"G729", 4}, {"18", 2} }, { {0, 0}, {0, 0} } };

2 1

Dynamic CSEQ Updates
by Tyler Moore 23 Mar '21

23 Mar '21

Hey kamailio team, When are the callbacks in the dialog module for updating $dlg_var(cseq_diff) called? I am trying to dynamically enable / disable cseq updates (some specific carriers need it and some don't) by setting $dlg_var(cseq_diff)=$null prior to sending the request but it seems like the callback happens after relaying. For example I tried various locations: - prior to t_relay() - in onreply_route[] - in failure_route[] - in event_route[tm:local-request] - in event_route[tm:local-response] I also tried setting modparam("dialog", "initial_cbs_inscript", 1) and calling dlg_manage() prior to routing and those didn't seem to be the right callbacks either. Either the callback that updates $dlg_var(cseq_diff) occurs after t_relay() / forward() is called or setting $dlg_var(cseq_diff)=$null has no effect. Is dynamically turning CSEQ updates on / off possible by overwriting $dlg_var(cseq_diff)? Or would this require new logic in the dialog module to be supported? Regards, *Tyler Moore* <https://devopsec.net/> Full Stack Software Engineer <http://www.google.com/search?q=full+stack+software+engineer+job+description> Flyball Labs <http://goflyball.com/> Office: 888-907-2085, ext: 34 <8889072085;ext=34> Cell: 248-909-2769 <2489092769> Email: tmoore(a)goflyball.com [image: FLYBALL TECHNICAL SOLUTIONS, LLC]

2 3

Info: Freezing development for Kamailio v5.5.x series - March 31, 2021
by Daniel-Constantin Mierla 22 Mar '21

22 Mar '21

Hello, this is the notification to let everybody know that the development of Kamailio v5.5.x series will be frozen at the end of March 31, 2021. Should anyone plan to add new features/modules and be part of v5.5.x, then they must be committed to git master branch or a pull request created by that date. Afterwards, the new features will have to be hold for a few weeks till branch 5.5 is created and development branch unfrozen, and they will be part of the next future release v5.6.x (or other version number to be decided later). Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla

1 0

JANSSON Delete from JSON
by Jeremy McNamara 22 Mar '21

22 Mar '21

Hi Folks - I am using JANSSON to store JSON data in an htable. How does one remove an entire element from a JSON? I do not see a specific function mentioning clear or remove exposed in the Kamailio module, but do see various clear/remove methods in the underlying C library. Below does set the value of key foo to null. I would like to remove both the key and value of foo. jansson_set("null", "$var(foo)", "$var(json)", "$var(result)"); Running Kamailio v5.4 Debian 10 -Jeremy

2 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users