sr-users

sr-users@lists.kamailio.org

42 participants
37517 discussions

AAR change subscription ID
by eyas barhouk 03 Jun '19

03 Jun '19

dear community, when i'm trying to deploy kamailio IMS with PCRF i get ims-qos AAR error due to Subscription id. in ims_qos module i found that i can change the subscription_id type and value as following: * subscription_id to hard code subscription ID for AAR. Used for some broken PCRFs. Leave blank to use default * subscription_id_type to hard code subscription ID type for AAR. Only applicable if subscription_id is set. Set to -1 to use default. This is as per RFC 4006: END_USER_E164 0, END_USER_IMSI 1, END_USER_SIP_URI 2, END_USER_NAI 3, END_USER_PRIVATE 4 but when i changed it there was no change on AAR Subscription-id AVP. any advise about how to set or change the subscription id dears ?? B.R Eyas

1 0

Releasing a new version for Siremis
by Daniel-Constantin Mierla 03 Jun '19

03 Jun '19

Hello, after quite a bit of time, we are considering to release a new version for Siremis - the web management interface for Kamailio. A lot of effort has been pushed to address the issues with PHPv7.x, which deprecated a lot of PHPv5.x API as well as made more strict rules in regards to classes and inheritances. At this stage it should be in good stage, but it would help if others can give it a ride to Siremis master branch: * https://github.com/asipto/siremis Installation guidelines: * https://kb.asipto.com/siremis:install51x:main Testing with both PHP v5 and v7 is appreciated in order to be sure things were not broken for old systems. Any issue found should be reported on github project issue tracker. If all goes fine, in soon we will make the release. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

1 0

invalid payload location
by Kelvin Chua 31 May '19

31 May '19

is there a plan to create an sdp sanity functionality? ERROR: <core> [core/parser/sdp/sdp.c:212]: set_sdp_payload_attr(): Invalid payload location opensips has something similar sipmsg_validate() *'s'* - checks the integrity of the SDP body, if it exists Kelvin Chua

2 2

Table creation error when enabling ims_usrloc_scscf module.
by Ali Shirvani 30 May '19

30 May '19

Hi all, I installed kamailio v5.2.3 from source and IMS modules included. Then I tried to create required database and tables, I removed "dialog" from STANDARD_MODULES and added "ims_dialog ims_charging ims_usrloc_scscf ims_usrloc_pcscf presence" to the EXTRA_MODULES in kamctlrc file. When I issue `<kamailio_home>/sbin/kamctl create` I got following error: ERROR 1062 (23000) at line 39: Duplicate entry 'subscriber' for key 'table_name_idx' ERROR: Creating extra tables failed at ims_usrloc_scscf! Should I exclude an other module from STANDARD_MODUELS? Regards, Ali

2 1

turn on DEBUG level debugging for ICSCF module
by Trinh, Jenny 30 May '19

30 May '19

Hi, How do I turn on DEBUG level debugging for ICSCF module? Thanks Jenny

2 1

app_java.so: undefined symbol: JNI_CreateJavaVM please help
by Renato Gallo 30 May '19

30 May '19

gcj is not a requirement since 2018 [ https://www.codesd.com/item/undefined-symbol-jni-createjavavm-on-linux.html | https://www.codesd.com/item/undefined-symbol-jni-createjavavm-on-linux.html ] all details are in the bug ticket at the link: [ https://github.com/kamailio/kamailio/issues/1969 | https://github.com/kamailio/kamailio/issues/1969 ] please help Renato Gallo System Engineer sede legale e operativa: Via Privata Cefalonia, 14 - 20156 - Milano (MI) Tel. +39 02 - 87049490 Fax +39 02 - 48677349 Mobile. +39 342 - 6350524 Wi | FreeNumbers: https://freenumbers.way-interactive.com Wi | SMS: https://sms.way-interactive.com Wi | Voip: https://voip.way-interactive.com Asterweb: http://www.asterweb.org Le informazioni contenute in questo messaggio e negli eventuali allegati sono riservate e per uso esclusivo del destinatario. Persone diverse dallo stesso non possono copiare o distribuire il messaggio a terzi. Chiunque riceva questo messaggio per errore è pregato di distruggerlo e di informare immediatamente [ mailto:info@sigmaware.it | info@ ] asterweb.org

1 0

Fwd: Stack smash error when using auth_ephemeral with KEMI
by Grant Bagdasarian 30 May '19

30 May '19

Hi Daniel, See pastebin url below for the backtrace. https://pastebin.com/tTUUk4YH Hopefully I did it the right way. Please let me know if you need anything else. FYI, Kamailio is running inside of a docker container. version: kamailio 5.2.1 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 I can easily replicate this, but to be sure I've saved the core file locally on my machine. Regards, Grant On Thu, May 2, 2019 at 10:05 AM Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: > > Hello, > > can you get a core file for this case? > > Set `ulimit -c unlimited` before starting Kamailio as root and run again. > > Once you have the core file, get the backtrace with gdb. > > Cheers, > Daniel > > On 01.05.19 20:26, Grant Bagdasarian wrote: > > Hello, > > > > I was trying out the auth_ephemeral module inside the xhttp > > event_route in Python KEMI, and discovered a possible bug. > > > > https://pastebin.com/4Ghumfis > > > > The following will result in the stack smash error. Whenever I leave > > out the unixtimestamp the > > module will complain about not being able to convert to an int, which > > make sense, but doesn't lead to a stack smash error and a complete > > crash of Kamailio. > > > > KSR.auth_ephemeral.autheph_authenticate("1576734089:grant", "1234"). > > > > According to the documentation this module can only be used in > > REQUEST_ROUTE, but I found a presentation online which also used this > > module and that particular function in event_route, which is what I > > need for WebSocket authentication. > > > > Hope this helps. Please let me know if you need more information. > > > > Regards, > > > > Grant > > > > _______________________________________________ > > Kamailio (SER) - Users Mailing List > > sr-users(a)lists.kamailio.org > > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > -- > Daniel-Constantin Mierla -- www.asipto.com > www.twitter.com/miconda -- www.linkedin.com/in/miconda > Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com >

2 10

Kamailio Load Balancing
by Gaurav Bmotra 30 May '19

30 May '19

HI i am using kamailio 5.1.2 With Ubuntu 18.04.2 LTS and using Freeswitch as Media server and kamailio as Register server i wan to implement load balance on this plz help thank you Gaurav -- *Regards:* Gaurav Kumar

3 7

usrloc extra attributes and db_mode=0
by Patrick Wakano 29 May '19

29 May '19

Hello list, Hope you all doing well! I am trying to use the extra attributes (xavp_contact) of the usrloc module to save some additional info about the user. I am setting the value before the save() and doing a call to registered() (not lookup()) before trying to access these extra attributes. This works fine with db_mode=3 but does not work in case of db_mode=0. Does anyone knows if it should also work with mode 0? I was expecting it to work but a call to kamcmd ul.dump show nothing related..... I don't want to use the DB for the location purposes because I prefer to have multiple servers using the dmq_usrloc (that works like a charm!) and it conflicts with DB persistence of the location table (when the DMQ replication happens, all servers (sharing the same DB) try to save the same user info in the location table) Thank you, Kind regards, Patrick Wakano

2 6

Statistics help
by Duarte Rocha 29 May '19

29 May '19

Greetings, I'm doing some monitoring of my Kamailio in order to quickly identify system failures and overloads. In order to do that i have scripts that read the output of "kamcmd sl.stats" and identify the rising of "500_replies", "5xx_replies" and "6xx_replies". However, i have rate limiting on my Kamailio, which generates "503" replies when limit is reached, which generates an unnecessary alarm. Is there a way to get more specific stats about the repleis generated by Kamailio? If that isn't possible, will i be safe only monitoring "500" and "6xx" replies? In my experience, when the server has reached a processing or memory limit, the reply is always 500, but i'm not really sure about this. Thank you for your help. Best Regards, Duarte Rocha

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users