sr-users

sr-users@lists.kamailio.org

1 participants
37563 discussions

RE: [Serusers] Admin Interface
by Dan Austin 06 Mar '03

06 Mar '03

How about a java applet for use with a web browser? I'd have no problem with a requirement for a Windows PC for management, but I can see it being an issue for others. And yes I would use it, in whatever form it took. Dan -----Original Message----- From: Erik Lagerway [mailto:sipdev@xten.com] Sent: Thursday, March 06, 2003 1:50 PM To: sip-implementors(a)cs.columbia.edu Cc: serusers(a)lists.iptel.org Subject: [Serusers] Admin Interface We are contemplating building an Admin interface for SER that could run on a windows os. We like the fact that the server is running on Linux but we require a more intuitive interface for administration. A web interface is not acceptable, just not enough functionality. We would like to create an executable that runs on windows which interfaces with SER server running on Linux. I am curious if anyone else could make use of a GUI that would incorporate all of the SER features and functionality. What do you think? Should we attempt it? Does anyone have any preference on the language we use, e.g. JAVA, C++ ? Erik Lagerway Xten Networks Inc. 7170-515 West Hastings St Vancouver, BC V6B5K3 Ph. 1.604.878.0440 ext.5

1 0

[Serusers] SER and SIPC (columbia uni)
by Mario Kolberg 06 Mar '03

06 Mar '03

Hi, I tried to use the SER SIP server together with a number of different UAs. I successfully used a Pingtel phone, pingtel softphone, the Ubiquity UA, and kphone on linux. However, when I tried to use SIPC from Columbia Uni I keep getting eror messages 400: Bad Request. As all the other UAs are working fine I assume this may be a problem with sipc. Have you any experiences with using sipc and ser? I attach an error log between the Pingtel phone (139.153.254.222) is trying to send an INVITE to sipc (139.153.254.34). SER (and ngrep) are running on 139.153.254.50. (registrations are going through fine and also invites the other way (from sipc to pingtel) go through ok). Thanks very much for your help! Regards, Mario -- Mario Kolberg phone: +44 (0)1786 46 7440 Lecturer in Computing Science fax : +44 (0)1786 46 4551 email: mko(a)cs.stir.ac.uk Department of Computing Science and Mathematics University of Stirling Stirling FK9 4LA Scotland, UK -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

5 6

[Serusers] serweb download
by nmacia＠info.unlp.edu.ar 06 Mar '03

06 Mar '03

I everybody. where can i download serweb???? at http://developer.berlios.de/projects/serweb/ there is not any release for download and in home page it says "Web-based user provisioning, serweb, available" thank's all ------------------------------------------------- This mail sent through IMP: http://mail.info.unlp.edu.ar/

3 2

RE: [Serusers] multiple registration on one user login
by Ng, Soo Sim 06 Mar '03

06 Mar '03

Jiri, Scenario is providing IP Telephony to the household. I am more concern about the security of the Hardphone. I am thinking of auto-provisioned the hardphone (eg C7960, ATA186) without subsriber intervention. What the subscriber know is their phone # (Just like legacy phone system). Since the Hardphone is 'hard-coded', the phone can move round the vicinity of the redisential area and still able to make a call. Potentially this will lead to abuse, as someone may take the phone to a different location when owner is not around and make a 'free' call, return back the phone and the billing still charge the original subsriber. Any other suggestion to counter this issue is much appreacited. SSng -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Wednesday, March 05, 2003 12:18 AM To: Ng, Soo Sim; serusers(a)lists.iptel.org Subject: Re: [Serusers] multiple registration on one user login At 03:08 PM 3/4/2003, Ng, Soo Sim wrote: >I have such requirements. In providing sip-based residential ip telephony, I would like to restrict each home subsriber is only allowed to register one UA per account. This would make easy for billing purposes and for security reasons. > >Is there a way to achieve this requirement with SER? If that is your desparate wish, it is little overhead to make you happy. I'm still not sure though, it is a useful thing. Maybe an operator can make more revennues if my wife can accept calls at any phone in my building and initiate calls in parallel with my doughter. What are exactly the billing/security reasons here? -Jiri

2 1

RE: [Serusers] multiple registration on one user login
by Jiri Kuthan 05 Mar '03

05 Mar '03

Hello, I fear that such a case can't be avoided with allowing only a single registration. If I steal your phone away from your desk, you will not register with it anymore, but I will and we will have exactly one valid registration. Leaving SIP phones with hard-wired passwords on your desk has simply the same potential as leaving your credit-card or cell-phone there. What can be done about fraud? User education -- don't leave your money and phone unattended. Hotline -- report stolen phones to lock the account. PIN Lock -- use phones which can log-off and log-on (I'm not aware of any now -- only 3com used to do that) -Jiri ps -- ability to move is a feature. I know people who are very glad to use Vonage's US phone number and move with their ATAs and the US phone number around in Europe. At 11:37 PM 3/5/2003, Ng, Soo Sim wrote: >Jiri, > >Scenario is providing IP Telephony to the household. >I am more concern about the security of the Hardphone. I am thinking of auto-provisioned the hardphone (eg C7960, ATA186) without subsriber intervention. What the subscriber know is their phone # (Just like legacy phone system). > >Since the Hardphone is 'hard-coded', the phone can move round the vicinity of the redisential area and still able to make a call. Potentially this will lead to abuse, as someone may take the phone to a different location when owner is not around and make a 'free' call, return back the phone and the billing still charge the original subsriber. > >Any other suggestion to counter this issue is much appreacited. > >SSng > >-----Original Message----- >From: Jiri Kuthan [mailto:jiri@iptel.org] >Sent: Wednesday, March 05, 2003 12:18 AM >To: Ng, Soo Sim; serusers(a)lists.iptel.org >Subject: Re: [Serusers] multiple registration on one user login > > >At 03:08 PM 3/4/2003, Ng, Soo Sim wrote: >>I have such requirements. In providing sip-based residential ip telephony, I would like to restrict each home subsriber is only allowed to register one UA per account. This would make easy for billing purposes and for security reasons. >> >>Is there a way to achieve this requirement with SER? > >If that is your desparate wish, it is little overhead to make you happy. >I'm still not sure though, it is a useful thing. > >Maybe an operator can make more revennues if my wife can accept calls at >any phone in my building and initiate calls in parallel with my doughter. > >What are exactly the billing/security reasons here? > >-Jiri -- Jiri Kuthan http://iptel.org/~jiri/

1 0

RE: [Serusers] Messenger 4.7, CIsco and PSTN
by Dan Austin 05 Mar '03

05 Mar '03

I have to dig at it abit, but it may also be a codec issue on the Phone. I had a similar error before telling the Cisco which codec to use. I see you are using G711Alaw. Can you try G711Ulaw? The PSTN hand-off section of your config looks very familiar to me, so if you did pull it from the Howto, note that it is an example of what worked for me. I've seen quite a few much more sophisticated scripts on the list. Dan -----Original Message----- From: Jiri Kuthan [mailto:jiri@iptel.org] Sent: Wednesday, March 05, 2003 2:29 AM To: Rikard Westlund; serusers(a)lists.iptel.org Subject: Re: [Serusers] Messenger 4.7, CIsco and PSTN I suspect what happens is that you forward the requests with your server's address in its r-uri to gateway "as is" and the Cisco gateway would like to see its IP address in the r-uri instead. Try rewriting r-uri -- see bellow. As for the Messenger problem, see our doc http://www.iptel.org/ser/doc/seruser-html/x878.html#AEN890 -Jiri At 11:04 AM 3/5/2003, Rikard Westlund wrote: >Hi all, > >I have a Ser 0.8.10-2 install on a Redhat 7.3 kernel 2.4.18-3. > >As clients I use Pingtel and messenger 4.7. I have followed the setup >guide on http://www.fitawi.com/ser-Howto.html > >I can register the pingtel phone with no problem. I can call from the >PSTN to the pingtel via a Cisco AS5300 with no problems. > >When i try toi call from pingtel to PSTN iget the following answer: > >1. from pingtel to ser - INVITE sip:<pstnnumber>@serserver_ip 2. from >ser to pingtel - Status: 100 trying 3. from ser to cisco - INVITE >sip:<pstnnumber>@serserver_ip 4. from cisco to ser - Status: 400 bad >request - ínvalid IP address' 5. from cisco to ser - Status: 400 bad >request - ínvalid IP address' > >This is my ser.cfg: > ># $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ ># ># simple quick-start config script ># > ># ----------- global configuration parameters ------------------------ > >debug=4 # debug level (cmd line: -dddddddddd) >fork=yes >log_stderror=no # (cmd line: -E) >check_via=no # (cmd. line: -v) >dns=no # (cmd. line: -r) >rev_dns=no # (cmd. line: -R) >port=5060 >children=4 >fifo="/tmp/ser_fifo" > ># ------------------ module loading ---------------------------------- > ># Uncomment this if you want to use SQL database >loadmodule "//usr/lib/ser/modules/mysql.so" > >loadmodule "//usr/lib/ser/modules/sl.so" >loadmodule "//usr/lib/ser/modules/tm.so" >loadmodule "//usr/lib/ser/modules/rr.so" >loadmodule "//usr/lib/ser/modules/maxfwd.so" >loadmodule "//usr/lib/ser/modules/usrloc.so" >loadmodule "//usr/lib/ser/modules/registrar.so" > ># Uncomment this if you want digest authentication ># mysql.so must be loaded ! >loadmodule "//usr/lib/ser/modules/auth.so" > ># ----------------- setting module-specific parameters --------------- > ># -- usrloc params -- > >#modparam("usrloc", "db_mode", 0) > ># Uncomment this if you want to use SQL database ># for persistent storage and comment the previous line >modparam("usrloc", "db_mode", 2) > ># -- auth params -- ># Uncomment if you are using auth module ># >#modparam("auth", "secret", "alsdkhglaksdhfkloiwr") modparam("auth", >"calculate_ha1", yes) # ># If you set "calculate_ha1" parameter to yes (which true in this config), ># uncomment also the following parameter) ># >modparam("auth", "password_column", "password") > ># ------------------------- request routing logic ------------------- > ># main routing logic > >route{ > > # initial sanity checks -- messages with > # max_forwars==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (len_gt( max_len )) { > sl_send_reply("513", "Message too big"); > break; > }; > > > # Do strict routing if pre-loaded route headers present > rewriteFromRoute(); > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > ># Uncomment this if you want to use digest authentication > if (!www_authorize("norrtull.nexus.se", "subscriber")) { > www_challenge("norrtull.nexus.se", "0"); > break; > }; > > save("location"); > break; > }; > ># attempt handoff to PSTN > > if (uri=~"^sip:1[0-9]*@norrtull.nexus.se") { ## This assumes that the caller is > log("Forwarding to PSTN\n"); ## registered in our realm *** here *** rewrite uri prior to fwd-ing. rewritehostport("cisco_ip:5060"); > t_relay_to( "cisco_ip", "5060"); ## Our Cisco router > break; > }; > > > # native SIP destinations are handled using our USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > # forward to current uri now > if (!t_relay()) { > sl_reply_error(); > }; > >} > >--------------------------------- > >In the cisco I have the following config: > >! >dail-peer voice 25 voip >destination-pattern XXXX >session protocol sipv2 >codec g711alaw >no vad >session target ipv4:serserver_ip >! > >I have added 2 subscribers with the serctl command and registration is >working well from pingtel. In Messenger 4.7 it's not working at all. I >get 401 Unauthorized. > >Well I think thats about it.. > >Please feel free to contact me if you need more information > >Best regards > >Rikard Westlund > > > >_________________________________________________________________ >Tired of spam? Get advanced junk mail protection with MSN 8. >http://join.msn.com/?page=features/junkmail > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] Messenger 4.7, CIsco and PSTN
by Rikard Westlund 05 Mar '03

05 Mar '03

Hi all, I have a Ser 0.8.10-2 install on a Redhat 7.3 kernel 2.4.18-3. As clients I use Pingtel and messenger 4.7. I have followed the setup guide on http://www.fitawi.com/ser-Howto.html I can register the pingtel phone with no problem. I can call from the PSTN to the pingtel via a Cisco AS5300 with no problems. When i try toi call from pingtel to PSTN iget the following answer: 1. from pingtel to ser - INVITE sip:<pstnnumber>@serserver_ip 2. from ser to pingtel - Status: 100 trying 3. from ser to cisco - INVITE sip:<pstnnumber>@serserver_ip 4. from cisco to ser - Status: 400 bad request - ínvalid IP address' 5. from cisco to ser - Status: 400 bad request - ínvalid IP address' This is my ser.cfg: # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("norrtull.nexus.se", "subscriber")) { www_challenge("norrtull.nexus.se", "0"); break; }; save("location"); break; }; # attempt handoff to PSTN if (uri=~"^sip:1[0-9]*@norrtull.nexus.se") { ## This assumes that the caller is log("Forwarding to PSTN\n"); ## registered in our realm t_relay_to( "cisco_ip", "5060"); ## Our Cisco router break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } --------------------------------- In the cisco I have the following config: ! dail-peer voice 25 voip destination-pattern XXXX session protocol sipv2 codec g711alaw no vad session target ipv4:serserver_ip ! I have added 2 subscribers with the serctl command and registration is working well from pingtel. In Messenger 4.7 it's not working at all. I get 401 Unauthorized. Well I think thats about it.. Please feel free to contact me if you need more information Best regards Rikard Westlund _________________________________________________________________ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail

2 1

[Serusers] PRACK
by Greg Fausak 05 Mar '03

05 Mar '03

I copied a few SNOM phone messages to the list. I am having problems communicating with the SNOM phone. I guess it isn't working because the SNOM phone sends a PRACK after the 183, and the received OK doesn't have a 'Record-Route'. This doesn't make sense to me. I don't know why the phone is listening to the first OK (the OK to the PRACK) rather than the second OK (the OK to the INVITE). If that is the way it is then do I have the PROXY mis-configured? ----- if(method=="INVITE" | method=="BYE" | method=="PRACK") { log(1,"TRACE: addRecordRoute()"); setflag(1); setflag(2); addRecordRoute(); }; append_hf("P-hint: ATEND\r\n"); if(!t_relay()) { sl_reply_error(); break; }; When I do a ngrep trace, I see the packet being relayed... ---- # U 2003/03/03 20:05:59.858473 216.87.145.22:5060 -> 216.87.144.203:5060 PRACK sip:2143357976@216.87.144.203;branch=0 SIP/2.0. Via: SIP/2.0/UDP 216.87.145.22:5060;branch=z9hG4bK-bec8z5qwsbqg. Max-Forwards: 70. RAck: 5620 2 INVITE. From: "snom man" <sip:4695461245@augustvoice.net>;tag=1r1bpkl72i. To: <sip:2143357976@augustvoice.net;user=phone>;tag=63631E34-197C. Call-ID: 3c26f8de39d9-7dyvkrekeha3(a)216.87.145.22. CSeq: 4 PRACK. Route: <sip:92143357976@216.87.144.196:5060;user=phone>. Contact: <sip:4695461245@216.87.145.22:5060;line=1>. Content-Length: 0. Authorization: Digest username="4695461245",realm="augustvoice.net",nonce="3e640b3300000000dbb edccd04f755cac7e3b6dd55d202c9",uri="sip:",response="3693b828395cd40fe1b1 ab5f9ad61308",algorithm=md5. . # U 2003/03/03 20:05:59.859540 216.87.144.203:5060 -> 216.87.144.196:5060 PRACK sip:92143357976@216.87.144.196:5060;user=phone SIP/2.0. Record-Route: <sip:2143357976@216.87.144.203;branch=0>. Via: SIP/2.0/UDP 216.87.144.203;branch=z9hG4bKe44a.ff0091c4.0. Via: SIP/2.0/UDP 216.87.145.22:5060;branch=z9hG4bK-bec8z5qwsbqg. Max-Forwards: 69. RAck: 5620 2 INVITE. From: "snom man" <sip:4695461245@augustvoice.net>;tag=1r1bpkl72i. To: <sip:2143357976@augustvoice.net;user=phone>;tag=63631E34-197C. Call-ID: 3c26f8de39d9-7dyvkrekeha3(a)216.87.145.22. CSeq: 4 PRACK. Contact: <sip:4695461245@216.87.145.22:5060;line=1>. Content-Length: 0. Authorization: Digest username="4695461245",realm="augustvoice.net",nonce="3e640b3300000000dbb edccd04f755cac7e3b6dd55d202c9",uri="sip:",response="3693b828395cd40fe1b1 ab5f9ad61308",algorithm=md5. P-hint: ATEND. . # U 2003/03/03 20:05:59.861477 216.87.144.196:5060 -> 216.87.144.203:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 216.87.144.203;branch=z9hG4bKe44a.ff0091c4.0,SIP/2.0/UDP 216.87.145.22:5060;branch=z9hG4bK-bec8z5qwsbqg. From: "snom man" <sip:4695461245@augustvoice.net>;tag=1r1bpkl72i. To: <sip:2143357976@augustvoice.net;user=phone>;tag=63631E34-197C. Date: Tue, 04 Mar 2003 02:05:59 GMT. Call-ID: 3c26f8de39d9-7dyvkrekeha3(a)216.87.145.22. Server: Cisco-SIPGateway/IOS-12.x. CSeq: 4 PRACK. Content-Length: 0. . # U 2003/03/03 20:05:59.861705 216.87.144.203:5060 -> 216.87.145.22:5060 SIP/2.0 200 OK. Via:SIP/2.0/UDP 216.87.145.22:5060;branch=z9hG4bK-bec8z5qwsbqg. From: "snom man" <sip:4695461245@augustvoice.net>;tag=1r1bpkl72i. To: <sip:2143357976@augustvoice.net;user=phone>;tag=63631E34-197C. Date: Tue, 04 Mar 2003 02:05:59 GMT. Call-ID: 3c26f8de39d9-7dyvkrekeha3(a)216.87.145.22. Server: Cisco-SIPGateway/IOS-12.x. CSeq: 4 PRACK. Content-Length: 0. . ----- There is a Record-route going out, but not one coming back. Does a Record-route need to be injected into the last OK back to the UA? This is too hard :-) ---greg

3 4

[Serusers] Debian ser wont start up
by Jaime Hemmett 05 Mar '03

05 Mar '03

I installed ser stable then unstable debs on my 2.2.20 kernel install of unstable debian. Errors: when init.d/ser start: Starting ser: serToo much shared memory demanded: 33554432 Terminated SYSLOG: Mar 5 10:09:19 webserver ser: ERROR: shm_mem_init: could not attach shared memo ry segment: Invalid argument Mar 5 10:09:19 webserver ser: could not initialize shared memory pool, exiting. a friend sent me: scmctl from shmctl(2): Various fields in a struct shmid_ds were shorts under Linux 2.2 and have become longs under Linux 2.4. To take advantage of this, a recompilation under glibc-2.1.91 or later should suffice. (The kernel dis-tinguishes old and new calls by a IPC_64 flag in cmd.) Do I need kernel 2.4? Any hints? Have I missed some documentation? Jaime Hemmett

2 2

[Serusers] multiple registration on one user login
by Benny Ho 04 Mar '03

04 Mar '03

Dear all, SIP is allow multiple ua to register under one uri? How could I disable this? I mean only one ua can login under one user account?

4 7

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users