sr-users

sr-users@lists.kamailio.org

53 participants
37560 discussions

Re: [Serusers] problem with loading compiled radius modules
by Xiang 15 Feb '03

15 Feb '03

I have resolved this problem. The radiusclient library was not included in the both radius modules, somehow. After I statically linked the radiusclient library with the option -lradiusclient when compiling, it works. regards yang ------------------- > The modules need radiusclient library but linker is unable to find > symbols from the library. Do you have the radiusclient library installed > correctly ? > > regards, Jan. > > On 14-02 14:35, Yang Xiang wrote: > > Hi, > > > > I get the same error. > > > > I have compiled the whole server and try to load modules on the host where > > the server was compiled. Unfortunatelly it doesn't work. I get the same > > error message as before. > > > > What should I do???? > > > > Regards > > > > Yang > > > > > > ----- Original Message ----- > > From: "Jan Janak" <J.Janak(a)sh.cvut.cz> > > To: "Yang Xiang" <yang.xiang(a)iitb.fraunhofer.de> > > Sent: Friday, February 14, 2003 2:03 PM > > Subject: Re: [Serusers] problem with loading compiled radius modules > > > > > > > Recompile the whole server if you can. As you said you use precomplied > > > binaries and it is possible that it was compiled using a different > > > compiler. > > > > > > regards, Jan. > > > > > > On 14-02 13:56, Yang Xiang wrote: > > > > Hi, > > > > > > > > Now I get more error messages: > > > > > > > > 0(22528) ERROR: load_module: could not open module > > > > </usr/local/lib/ser/modules/radius_acc.so>: ld.so.1: ser: fatal: > > relocation > > > > error: file /usr/local/lib/ser/modules/radius_acc.so: symbol > > rc_avpair_add: > > > > referenced symbol not found > > > > 0(22528) parse error (30,13-54): failed to load module > > > > 0(22528) ERROR: load_module: could not open module > > > > </usr/local/lib/ser/modules/radius_auth.so>: ld.so.1: ser: fatal: > > relocation > > > > error: file /usr/local/lib/ser/modules/radius_auth.so: symbol > > > > rc_read_config: referenced symbol not found > > > > 0(22528) parse error (31,13-55): failed to load module > > > > ERROR: bad config file (2 errors) > > > > > > > > What is wrong? In acc_mod.c and auth_mod.c I changed the definition of > > > > CONFIG_FILE and let it point to an absolute path > > > > "/usr/local/etc/radiusclient/radiusclient.conf". By the way, I compiled > > the > > > > modiles on another mashine and copied them to the mashine where ser > > runs. Is > > > > that right? > > > > > > > > regards, > > > > > > > > yang > > > > > > > > > > > > > >

1 0

[Serusers] Is there a tool for benchmarking SER?
by Maxim Sobolev 15 Feb '03

15 Feb '03

Folks, Our company mostly finished development of the SIP VoIP system that consists of the SER for registration, de-NATifying, and routing and B2BUA for debit applications. Now we would like to test performance of the whole system under the load. In the SER's documentation I saw very impressive performance numbers and wonder how they were obtained. Are there any freely-available tools for creating huge number of SIP sessions simulateneously and if yes, how they can be obtained? Any pointers are greatly appreciated. Thanks! -Maxim

2 2

[Serusers] calling a module
by Mario Kolberg 15 Feb '03

15 Feb '03

Hi, > simply use fi_check() in the configuration script. That will call your > function. Thats what I thought also, but unfortunately, SER does not run when. If I run it with a call fi_check() in the ser.cfg file it logs a parse error: Feb 14 14:15:00 DISCUS ser: parse error (39,1-9): parse error Feb 14 14:15:00 DISCUS ser: parse error (39,1-9): I have attached the complete cfg file. But if I remove that fi_check() call, ser runs fine. Have I messed something up with parameters???? Thanks for your help! Mario -- Mario Kolberg phone: +44 (0)1786 46 7440 Lecturer in Computing Science fax : +44 (0)1786 46 4551 email: mko(a)cs.stir.ac.uk Department of Computing Science and Mathematics University of Stirling Stirling FK9 4LA Scotland, UK -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it. # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" alias="cs.stir.ac.uk" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #mario loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" loadmodule "//usr/lib/ser/modules/fi.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #mario loadmodule "//usr/lib/ser/modules/auth.so" fi_check(); # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #mario modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #mario modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #mario modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #mario if (!www_authorize("cs.stir.ac.uk", "subscriber")) { www_challenge("cs.stir.ac.uk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; }

3 2

[Serusers] writing a module
by Mario Kolberg 15 Feb '03

15 Feb '03

Hi, I am trying to write a module for SER. I managed to write a tiny test module ("hello world") and it compiles fine (the source is attached). However, I'm not quite sure I fully understood how to execute the functions defined in the module. I included the module to sr_modules.c and also a line 'loadmodule' in the ser.cfg. But how do I actually execute the function in the module every time a (INVITE) message is received by the server? The docs couldn't really help ... Thanks very much! Regards, Mario -- Mario Kolberg phone: +44 (0)1786 46 7440 Lecturer in Computing Science fax : +44 (0)1786 46 4551 email: mko(a)cs.stir.ac.uk Department of Computing Science and Mathematics University of Stirling Stirling FK9 4LA Scotland, UK -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it. #include <stdio.h> #include <string.h> #include <stdlib.h> #include "../../sr_module.h" #include "../../dprint.h" #include "../../error.h" #include "../../ut.h" static int fi_check(struct sip_msg* msg,char* str,char* str2); static int mod_init(void); #ifdef STATIC_FI struct module_exports fi_exports = { #else struct module_exports exports= { #endif "fi_module", (char*[]){ "fi_check" }, (cmd_function[]){ fi_check }, (int[]){ 0 }, (fixup_function[]){ 0 }, 1, NULL, NULL, NULL, 0, mod_init, (response_function) 0, (destroy_function) 0, 0, 0 }; static int mod_init(void) { printf("FI module initializing\n"); return 0; } static int fi_check(struct sip_msg* msg, char* str1,char* str2) { printf("FI module executing\n"); return 1; }

3 2

Re: [Serusers] Routing with ser / Problems with linphone
by Jiri Kuthan 14 Feb '03

14 Feb '03

/* digging through the archives to make sure I haven't missed anything while I was off-line last weeks ... */ I actually think that is a backwards compatibility issue in SIP. Loose-routing works correctly if sender knows whether the next-hop is loose or strict router. That is a correct assumption as long as the routing information collected automatically in record-route tells you that. If you use pre-configured Route along with an outbound proxy, you configure this strict/loose on your own and you need to get it right. Hence, when you configure loose routing for use with a strict outbound router, things will fail. Anyway, with lr support in next ser release, it should not matter any more. We've had the same issue with kphone previouly, it works since an option has been introduce to enforce use of strict routing. see http://www.ietf.org/mail-archive/working-groups/sipping/current/msg03451.ht… -Jiri At 11:18 AM 2/5/2003, Klaus Darilion wrote: >Hello! > >I've installed ser (sip:obelix.ict.tuwien.ac.at) und want'ed to use it >with linphone, so I configured linphone to use ser as outbound proxy and >registrar. The registration works fine but not the INVITEs. ser answers >to an INVITE from linphone with a 404 Not Found and I found out that the >problem is the "Route" header in the INVITE from linphone. > >Route: <sip:obelix.ict.tuwien.ac.at;lr> > >When I remove the header from the invite and send it manually (sipsak) >the ser proxy accepts the invite and forwards it. I think ser reacts >wrong because if an RFC3261 proxy gets an request with a route header >which points to itself it should remove the header and forward the >request. > >Than I tried the same with an different proxy in the route header: > >Route: <sip:iptel.org;lr> > >Now, my ser proxy (sip:obelix.ict.tuwien.ac.at) accepts the request and >forwards it to iptel.org, but it rewrites the invite to: >INVITE sip:iptel.org;lr SIP/2.0 > >Thats what an RFC2543 proxy would do, but not an RFC3261 proxy, which >only is allowed to do that if the route header has no "lr" parameter or >if he is responsible for the domain in the request URI. If there is an >"lr" parameter the proxy must not change the request URI. > >If I'm wrong please let me know. > >I use ser 0.8.10 with the standard config file and linphone 0.9.1 & >0.10.0 > >Regards, >Klaus >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] Testing SER
by Jaime Hemmett 14 Feb '03

14 Feb '03

Hello, I installed SER, I have started the services. I haven't set up the mysql part yet, I wanted to test it working at all. With bone phone I have tried connecting but gotten: "java.net.BindException: Address already in use" The SER documentation makes out that SER can be used without the mysql parts to make calls with microsoft messenger > version 4.6 ut I've been unable to connect with this either. What now? Jaime.

3 4

[Serusers] Small patch for sip_dictionary
by Maxim Sobolev 14 Feb '03

14 Feb '03

Folks, sip_dictionary buindled with ser doesn't include Vendor-Specific attribute. Attached patch should fix it, it would be nice to have it included into the next release. Thanks! -Maxim $FreeBSD$ --- etc/sip_dictionary 2003/01/27 14:13:18 1.1 +++ etc/sip_dictionary 2003/01/27 14:13:39 @@ -48,6 +48,7 @@ ATTRIBUTE Framed-Route 22 string ATTRIBUTE Framed-IPX-Network 23 ipaddr ATTRIBUTE State 24 string +ATTRIBUTE Vendor-Specific 26 string ATTRIBUTE Session-Timeout 27 integer ATTRIBUTE Idle-Timeout 28 integer ATTRIBUTE Termination-Action 29 integer

2 1

Re: [Serusers] User permission question.
by Ivan Vignola 14 Feb '03

14 Feb '03

Hi, thank you for your replies. I need be sure that user 'ivan', with password 'ivanpswd', registers himself typing 'sip:ivan.vignola@192.168.11.237' and not typing 'silvio.berlusconi(a)192.168.11.237'. Regards. Ivan. >From: Jiri Kuthan <jiri(a)iptel.org> >To: "Ivan Vignola" <ivanvignola(a)hotmail.com>, serusers(a)lists.iptel.org >Subject: Re: [Serusers] User permission question. >Date: Fri, 14 Feb 2003 11:45:37 +0100 > >I'm not sure what it means "authenticate by his uri". There are quite >many URIs in each request, which BTW have very low security value. >Can you give more details? > >Thanks, > >-Jiri > >At 10:29 AM 2/14/2003, Ivan Vignola wrote: > >Hi, > > > >in my tests user can authenticate himself using user_id, password and any >sip uri. I need user authenticating himself only by his associated uri. How >can I do that? > > > >Thanks in advance. > > > >Ivan Vignola. > > > > > > > > > > > >_________________________________________________________________ > >Vinci la nuova Nissan Micra con MSN Messenger! >http://www.msn.it/messenger/ > > > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > >-- >Jiri Kuthan http://iptel.org/~jiri/ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers _________________________________________________________________ MSN Foto: condividi, ritocca e stampa le tue foto online http://photos.msn.it

2 1

[Serusers] User permission question.
by Ivan Vignola 14 Feb '03

14 Feb '03

Hi, in my tests user can authenticate himself using user_id, password and any sip uri. I need user authenticating himself only by his associated uri. How can I do that? Thanks in advance. Ivan Vignola. _________________________________________________________________ Vinci la nuova Nissan Micra con MSN Messenger! http://www.msn.it/messenger/

3 2

[Serusers] problem with loading compiled radius modules
by Yang Xiang 14 Feb '03

14 Feb '03

Hi Jan, I have successfully compiled the radius modules radius_acc.so and radius_auth.so. But when I try to load the both modules ser tells me: ERROR: bad config file (2 errors) I use the solaris binary package from iptel and have compiled myself only the both radius modules. Is there any incompability? How can I get mor debug information? Regards, Yang ----------------------------------- My config file: debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/radius_acc.so" loadmodule "/usr/local/lib/ser/modules/radius_auth.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic alias="pix-demo.fhg.de" route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("iptel.org", "subscriber")) { # www_challenge("iptel.org", "0"); # break; # }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; }

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users