sr-users

sr-users@lists.kamailio.org

50 participants
37557 discussions

[Serusers] (no subject)
by mko＠cs.stir.ac.uk 03 Feb '03

03 Feb '03

Hi, I have installed SER on linux and created a few users. I can register these users from SIP phones and soft-phones and can also establish connections between them. I have also created a user on the iptel.org server. I can ring from a client registered with my domain (cs.stir.ac.uk) the client registered with iptel.org. It works perfectly. However, ringing from the client registered with iptel.org a client registered locally doesn't work. Is this a config problem? How can I fix this? Any help is greatly appreciated! Best regards, Mario Kolberg -- Mario Kolberg phone: +44 (0)1786 46 7440 Lecturer in Computing Science fax : +44 (0)1786 46 4551 email: mko(a)cs.stir.ac.uk Department of Computing Science and Mathematics University of Stirling Stirling FK9 4LA Scotland, UK -- The University of Stirling is a university established in Scotland by charter at Stirling, FK9 4LA. Privileged/Confidential Information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), you may not disclose, copy or deliver this message to anyone and any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. In such case, you should destroy this message and kindly notify the sender by reply email. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, conclusions and other information in this message that do not relate to the official business of the University of Stirling shall be understood as neither given nor endorsed by it.

2 1

[Serusers] Error message I don't understand
by s-ser-maillinglist＠hilft.net 03 Feb '03

03 Feb '03

Hello, I'm trying to use the presence agent that is in the CVS version. I added the module and the lines ---- if (method=="SUBSCRIBE") { subscribe("registrar"); break; }; ---- to my ser.cfg file. By changing this I get the following error message when trying to "sign in" with the msn messenger UA: ---- 15(23129) ERROR: t_reply: cannot send a t_reply to a message for which no T-state has been established 15(23129) send_reply(): Error while sending 200 OK ---- What does this mean? I admit I don't know a lot about the details of the SIP protocol, but if you'd give me a hint on where to search, it'd help me a lot. Is the presence agent in CVS already usable at all? If yes, could someone please provide me a working config file? Thanks in advance, Stefan Schmidt

2 1

[Serusers] Routing to the PSTN
by Phillip Haynes 01 Feb '03

01 Feb '03

Hi, I have set up the SER and its working. The only problem is I cant get the routing logic to simultaneously route to either the User Loc or the PSTN. Its only doing one of the other. I am new to SIP, can u show me a sample script that will do both at the same time? Best regards, Phillip

5 7

[Serusers] Windows Messenger authentication fails.
by Ivan Vignola 31 Jan '03

31 Jan '03

Hi, I have successfully (I think that) installed SER server with ser-mysql package. I have set the environment variable 'SIP_DOMAIN="192.168.11.237"' (that is server IP address). I have succesfully added a user to subscriber table: 'serctl add ivan ivanpswd ivan(a)hotmail.com', but registering WM to server fails: URI = 'ivan(a)192.168.11.237' Passwowd = 'ivanpswd' User = 'ivan' This is my ser.cfg file: # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- loadmodule "//usr/lib/ser/modules/mysql.so" loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so" loadmodule "//usr/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- modparam("usrloc", "db_mode", 2) modparam("auth", "db_url", "sql://ser:heslo@localhost/ser") modparam("auth", "calculate_ha1", yes) modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- alias="engiweb.com" alias="sip.engiweb.com" route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; rewriteFromRoute(); if (uri=~"^sip:(.+@)?(192\.168\.11\.237|(sip\.)?engiweb\.com)([:;\?].*)?$") { if (method=="REGISTER") { if (!www_authorize("192.168.11.237", "subscriber")) { if (!proxy_authorize("192.168.11.237", "subscriber")) { www_challenge("engiweb.org", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; if (!t_relay()) { sl_reply_error(); }; } What could be the problem? Best regards. Ivan Vignola. _________________________________________________________________ MSN Extra Storage: piena libertà di esprimersi e comunicare http://www.msn.it/msnservizi/es/extra_storage_tag/

4 5

RE: [Serusers] user permission problem on ser-jabber gw
by Toni Barata (EPS) 31 Jan '03

31 Jan '03

Hi Daniel, The problem related with the permition to use de jabber gateway seems to be solved. Now I have a new problem. In the same scenario (Messenger sending a message to Jabber client) the messenger receives from the jabber gw the following error message: " ERROR:Connection to Jabber server lost. You have to login to Jabber server again (join the conferences again that you were participating, too)<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />" Can you figure what is happening here? Thanks, Toni -----Original Message----- From: Daniel-Constantin MIERLA [mailto:mierla@fokus.fraunhofer.de] Sent: sexta-feira, 31 de Janeiro de 2003 12:51 To: Toni Barata (EPS) Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, the SIP_ID field must be the SIP URI of the SIP user (e.g. ' sip:user1@mydomain.com <mailto:sip:user1@mydomain.com> ') -- that is for fast matching - From tag includes sip: in address of the origin. If you check the manual or the mail I pointed, the samples show that. Toni Barata (EPS) wrote: Hi Daniel, I have done this (creating the database sip_jab) before sending my first email. Regarding the association of SIP users with Jabber IDs, I have added an entry on table jusers this way on mysql: mysql> INSERT INTO jusers VALUES ('1','user1','user1',' user1(a)mydomain.com <mailto:user1@mydomain.com> ','0'); Should it be done this way or there are others ways to do it? If you take the sources of the module, in directory 'doc' you can find some perl or php scripts which can help you. You have to change the values from the beginning of scripts according with your configuration. The same problem persists. Try again now. Regards, Daniel Regards, Toni -----Original Message----- From: Daniel-Constantin MIERLA [ mailto:mierla@fokus.fraunhofer.de <mailto:mierla@fokus.fraunhofer.de> ] Sent: quinta-feira, 30 de Janeiro de 2003 19:54 To: Toni Barata (EPS) Cc: ' serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> ' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, you have to create the database for SIMPLE2Jabber gateway and after that you have to associate SIP users with Jabber IDs. I wrote a manual for gateway, but is more related to next ser release. Anyway, the database is the same, exported methods too, only some parameters has changed. The database can be created using sql script from CVS http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc/ <http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc /> xjab.sql?rev=1.1&content-type=text/vnd.viewcvs-markup or from manual http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide <http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide> It might provide a good help to read next message (especially last part of it) posted on this list http://lists.iptel.org/pipermail/serusers/2002-December/000049.html <http://lists.iptel.org/pipermail/serusers/2002-December/000049.html> After that if you still have problems do not hesitate to post a new message on the list. Best regards, Daniel Toni Barata (EPS) wrote: Hi folks, ( I think!) I have successfully installed SER server with the ser-mysql and ser-jabber packages ( I have also a mysql server and a Jabber server running). For testing I have established a SIP IM session between two MS Messengers and it did work. After this I have tried to establish a IM session between a user SIP (MS Messenger) and a user Jabber (Exodus), but when the messenger sends a message for the jabber gateway the following error occurs: "ERROR: Your message was not sent. You do not have permision to use the gateway." What could be the problem here? Best regards, Toni _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers> _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org <mailto:serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers>

2 1

Re: [Serusers] Windows Messenger authentication fails.
by Ivan Vignola 31 Jan '03

31 Jan '03

Hi Nils, thank you for your suggestion. 192.168.11.237 is my sever IP address and realm. I've added a user with USER_ID=ivan(a)192.168.11.237 PASSWORD=ivanpswd EMAIL-ADDRESS=ivan(a)hotmail.com in subscriber table as you wrote e I'm trying to register WM: ACCOUNT=ivan(a)192.168.11.237 PASSWORD=ivanpswd USER=ivan(a)192.168.11.237 Authentication doesn't work!!! Where am I wrong? Thank you in advance. Ivan. >From: Nils Ohlmeier <nils(a)ohlmeier.de> >To: "Ivan Vignola" <ivanvignola(a)hotmail.com>, serusers(a)lists.iptel.org >Subject: Re: [Serusers] Windows Messenger authentication fails. >Date: Fri, 31 Jan 2003 14:36:47 +0100 > >Hi Ivan, > >the problem with WM is that the address of the server have to be the same >as >the domain part of the URI (which is not RFC conform). For example you have >to add ivan(a)192.168.11.237 to the subscriber table and also use this >account >within your WM to get authentication working. > >Regards > Nils Ohlmeier > >On Friday 31 January 2003 13:30, Ivan Vignola wrote: > > Hi, > > I have successfully (I think that) installed SER server with ser-mysql > > package. > > I have set the environment variable 'SIP_DOMAIN="192.168.11.237"' (that >is > > server IP address). > > I have succesfully added a user to subscriber table: 'serctl add ivan > > ivanpswd ivan(a)hotmail.com', but registering WM to server fails: > > URI = 'ivan(a)192.168.11.237' > > Passwowd = 'ivanpswd' > > User = 'ivan' > > > > This is my ser.cfg file: > > > > > > # ----------- global configuration parameters ------------------------ > > > > debug=3 # debug level (cmd line: -dddddddddd) > > fork=yes > > log_stderror=yes # (cmd line: -E) > > check_via=no # (cmd. line: -v) > > dns=no # (cmd. line: -r) > > rev_dns=no # (cmd. line: -R) > > port=5060 > > children=4 > > fifo="/tmp/ser_fifo" > > > > # ------------------ module loading ---------------------------------- > > > > loadmodule "//usr/lib/ser/modules/mysql.so" > > loadmodule "//usr/lib/ser/modules/sl.so" > > loadmodule "//usr/lib/ser/modules/tm.so" > > loadmodule "//usr/lib/ser/modules/rr.so" > > loadmodule "//usr/lib/ser/modules/maxfwd.so" > > loadmodule "//usr/lib/ser/modules/usrloc.so" > > loadmodule "//usr/lib/ser/modules/registrar.so" > > loadmodule "//usr/lib/ser/modules/auth.so" > > > > > > > > # ----------------- setting module-specific parameters --------------- > > > > modparam("usrloc", "db_mode", 2) > > modparam("auth", "db_url", "sql://ser:heslo@localhost/ser") > > modparam("auth", "calculate_ha1", yes) > > modparam("auth", "password_column", "password") > > > > # ------------------------- request routing logic ------------------- > > > > alias="engiweb.com" > > alias="sip.engiweb.com" > > > > route{ > > if (!mf_process_maxfwd_header("10")) { > > sl_send_reply("483","Too Many Hops"); > > break; > > }; > > if (len_gt( max_len )) { > > sl_send_reply("513", "Message too big"); > > break; > > }; > > > > rewriteFromRoute(); > > > > if > > (uri=~"^sip:(.+@)?(192\.168\.11\.237|(sip\.)?engiweb\.com)([:;\?].*)?$") >{ > > > > > > if (method=="REGISTER") { > > > > if (!www_authorize("192.168.11.237", "subscriber")) { > > if (!proxy_authorize("192.168.11.237", "subscriber")) { > > www_challenge("engiweb.org", "0"); > > break; > > }; > > > > > > save("location"); > > break; > > }; > > > > lookup("aliases"); > > if (!lookup("location")) { > > sl_send_reply("404", "Not Found"); > > break; > > }; > > }; > > > > if (!t_relay()) { > > sl_reply_error(); > > }; > > > > } > > > > What could be the problem? > > > > Best regards. > > > > Ivan Vignola. > > > > > > > > > > > > > > _________________________________________________________________ > > MSN Extra Storage: piena libertà di esprimersi e comunicare > > http://www.msn.it/msnservizi/es/extra_storage_tag/ > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > >-- >gpg-key: http://www.ohlmeier.org/public_key.asc ><< attach3 >> _________________________________________________________________ Vuoi ricevere fantastiche offerte promozionali via email? http://www.msn.it/msnservizi/so/

2 2

RE: [Serusers] user permission problem on ser-jabber gw
by Toni Barata (EPS) 31 Jan '03

31 Jan '03

Hi Daniel, I have done this (creating the database sip_jab) before sending my first email. Regarding the association of SIP users with Jabber IDs, I have added an entry on table jusers this way on mysql: mysql> INSERT INTO jusers VALUES ('1','user1','user1','user1(a)mydomain.com','0'); Should it be done this way or there are others ways to do it? The same problem persists. Regards, Toni -----Original Message----- From: Daniel-Constantin MIERLA [mailto:mierla@fokus.fraunhofer.de] Sent: quinta-feira, 30 de Janeiro de 2003 19:54 To: Toni Barata (EPS) Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] user permission problem on ser-jabber gw Hello, you have to create the database for SIMPLE2Jabber gateway and after that you have to associate SIP users with Jabber IDs. I wrote a manual for gateway, but is more related to next ser release. Anyway, the database is the same, exported methods too, only some parameters has changed. The database can be created using sql script from CVS http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/modules/jabber/doc/ xjab.sql?rev=1.1&content-type=text/vnd.viewcvs-markup or from manual http://www.iptel.org/ser/doc/jabgw/xjab-manual.html#5._Admins_guide It might provide a good help to read next message (especially last part of it) posted on this list http://lists.iptel.org/pipermail/serusers/2002-December/000049.html After that if you still have problems do not hesitate to post a new message on the list. Best regards, Daniel Toni Barata (EPS) wrote: >Hi folks, > >( I think!) I have successfully installed SER server with the ser-mysql and >ser-jabber packages ( I have also a mysql server and a Jabber server >running). >For testing I have established a SIP IM session between two MS Messengers >and it did work. >After this I have tried to establish a IM session between a user SIP (MS >Messenger) and a user Jabber (Exodus), but when the messenger sends a >message for the jabber gateway the following error occurs: > >"ERROR: Your message was not sent. You do not have permision to use the >gateway." > >What could be the problem here? > >Best regards, >Toni > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > >

2 1

[Serusers] [Fwd: ser-0.8.10: Server shutdown, deinstall and reinstalling
by Savasar Sinan UYGUR 30 Jan '03

30 Jan '03

Hello, I am now working with iptel express router source code ver 0.8.10 on a Suse 8.0 machine with gcc version 3.2 How can i send a signal to the server for shutdown and deinstall the installed server later which ist installed from a 1) tar.gz source with make install and if different 2) tar.gz source by unzipping the code under directory "/" Thanks

2 1

[Serusers] user permission problem on ser-jabber gw
by Toni Barata (EPS) 30 Jan '03

30 Jan '03

Hi folks, ( I think!) I have successfully installed SER server with the ser-mysql and ser-jabber packages ( I have also a mysql server and a Jabber server running). For testing I have established a SIP IM session between two MS Messengers and it did work. After this I have tried to establish a IM session between a user SIP (MS Messenger) and a user Jabber (Exodus), but when the messenger sends a message for the jabber gateway the following error occurs: "ERROR: Your message was not sent. You do not have permision to use the gateway." What could be the problem here? Best regards, Toni

2 1

[Serusers] sip server test on a local network
by Savasar Sinan UYGUR 30 Jan '03

30 Jan '03

I have installed IpTel on a SuSe 8.0 machine and have 2 Windows machines attached with a hub. When i try to add a user with: serctl add username ....- then i have a problem executing mysql. So is it because of the wrong installation or do i have to install the mysql packet from the SuSe control center? Thanks in advance.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users