sr-users

sr-users@lists.kamailio.org

29 participants
37538 discussions

File transfer with Kamailio IMS??
by Ashok kumar Marra 16 Jul '18

16 Jul '18

Hi, I m using cent-os 6.2, kamailio-5.1.2 and openims-hss. I am using rtpengine to relay voice, but I am unable to send files or chat messages using it. I looked at rtpengine logs, it was saying unknown codec for chat and file-transfer requests. Then, I thought of using Kamailio msrp , tried but no success. Does current Kamailio IMS support file transfer? If so, please give me suggestions on doing it. -- With Best Regards, Ashok Kumar.

2 1

rtpengine/kamailio teardown method
by Abdoul Osséni 16 Jul '18

16 Jul '18

Hello all, There are some rtpengine parameters that permit to send an RPC command to kamailio in order to terminate a dialog. - timeout = xx - b2b-url = http://xxxx:xx/RPC - xmlrpc-format = 1 Each rpc command sent to Kamailio exited with status 256. By checking the code of rtpengine, I see rtpengine seems to use "teardown" method. I think Kamailio does not know this method. Can you help me please ? Abdoul OSSENI Ingénieur DevOps chez Néo-Soft Co-Fondateur de ON SERVICES Tél : +33 601 135 167

2 1

Communication between Kamailio Proxy and Registrar Server
by amit Kumar 16 Jul '18

16 Jul '18

Hi All, As per our requirement, we want to configure one Kamailio as a " Kamailio PROXY" and 2nd Kamailio as a " Kamailio REGISTRAR". Whenever any INVITE request come at " Kamailio PROXY" we want to get the UA information from " Kamailio REGISTRAR " and send INVITE to particular UA. Could you please let us know how achieve this. Thanks, Amit

2 1

SIP/2.0 500 I'm terribly sorry, server error occurred (1/TM)
by Aqs Younas 13 Jul '18

13 Jul '18

Greeting list, I am using two async functions(http_async_query) in configuration one for authentication and other one for push notifications. I am also using tsilio module to suspend the transaction and resumed it. I am resetting this flag 'T_ASYNC_SUSPENDED' before suspending the transaction. Everything is working fine except. When caller send CANCEL on the call, kamailio successfully completes sip flow at callee(B party) side but send back below packet towards caller. 2018/07/10 19:47:41.125893 172.31.21.87:5060 -> 39.38.156.111:59969 SIP/2.0 500 I'm terribly sorry, server error occurred (1/TM ) Via: SIP/2.0/UDP 39.38.156.111:59969 ;branch=z9hG4bK-524287-1---91c6114330fe6293;rport=59969 To: <sip:923335550609@sip.talkhomeappcall.com ;transport=UDP>;tag=9fe2d4c84d97a4af81aa65ca8fc51b3d-62cb From: <sip:923135082344@sip.talkhomeappcall.com;transport=UDP>;tag=d72eaf4c Call-ID: VkAwxpSgkKSGn5dXaXgn5A.. CSeq: 2 INVITE Content-Length: 0 root@sip:~# kamailio -V version: kamailio 5.1.3 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 08:06:26 May 2 2018 with gcc 4.9.2 Could someone please help me out how to fix this. Cancels are handles automatically so, i cannot hardcore anything to resolve it. Best Regards, Aqs Younas

3 8

Re: [SR-Users] sr-users Digest, Vol 158, Issue 12
by Ne Mo 13 Jul '18

13 Jul '18

Thanks Daniel! I'm folow: https://www.kamailio.org/docs/modules/stable/modules/ dispatcher.html#dispatcher.ex.install but my kamailio get errors: parameter <dstid_avp> of type <1> not found in module <dispatcher> parameter <attrs_avp> of type <1> not found in module <dispatcher> parameter <sock_avp> of type <1> not found in module <dispatcher> parameter <cnt_avp> of type <1> not found in module <dispatcher> I have no infor how to fix it Can you show me more detail about how to do: - *Fix error* * - Set the socket attribute to your private ip socket to do bridge from external to internal networks. * (just add to "attrs(str,opt)", and in my situation, it is my private IP of Kamailio server1 ? forexample: 1 sip:<PublicIP>:<Port> 0 0 duid=kamilioserver1;socket=<protocol>:<KamailioServer1_PrivateIP>:<Port>;my=xyz) (I don't understand what my=xyz mean..) * - Do i have to do something in Kamailio server2 and KamailioServer3 (or just create kamailio database each server and synchronyze kamailio database between them?)* *Thanks!* And thanks Mojtaba! I had read your recomment tutorial with OpenSIP, but do not know how to apply to my system. Have you got an other more clearly tutorial for this? On Thu, Jul 12, 2018 at 5:00 PM, <sr-users-request(a)lists.kamailio.org> wrote: > Send sr-users mailing list submissions to > sr-users(a)lists.kamailio.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > or, via email, send a message with subject or body 'help' to > sr-users-request(a)lists.kamailio.org > > You can reach the person managing the list at > sr-users-owner(a)lists.kamailio.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sr-users digest..." > > > Today's Topics: > > 1. UAC register (Ben Hood) > 2. Re: UAC register (Daniel-Constantin Mierla) > 3. Re: UAC register (Daniel-Constantin Mierla) > 4. dispatcher module complete tutorial (SamSung TV) > 5. Re: UAC register (Ben Hood) > 6. Re: UAC register (Ben Hood) > 7. Re: dispatcher module complete tutorial (Mojtaba) > 8. Re: SIP/2.0 500 I'm terribly sorry, server error occurred > (1/TM) (Aqs Younas) > 9. Re: dispatcher module complete tutorial (Daniel-Constantin Mierla) > 10. Re: UAC register (Daniel-Constantin Mierla) > 11. Re: UAC register (Daniel-Constantin Mierla) > 12. Re: SIP/2.0 500 I'm terribly sorry, server error occurred > (1/TM) (Daniel-Constantin Mierla) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 11 Jul 2018 12:36:36 +0100 > From: Ben Hood <ben(a)relops.com> > To: sr-users(a)lists.sip-router.org > Subject: [SR-Users] UAC register > Message-ID: <7B1A15CF-7BCF-4BCC-8DF0-20E2906BA1DA(a)relops.com> > Content-Type: text/plain; charset="utf-8" > > Hi, > > I’m wondering if there is a flag somewhere in the UAC module config that > prevents remote registration from happening. > > It looks like I’ve loaded the uacreg table but I can’t see any REGISTER > methods being sent from Kamailio to the remote peer. > > The remote registrants are loaded using this config: > > listen=udp:172.16.176.150:5060 > > loadmodule "db_postgres.so" > loadmodule "kex.so" > loadmodule "corex.so" > loadmodule "tm.so" > loadmodule "tmx.so" > loadmodule "sl.so" > loadmodule "rr.so" > loadmodule "pv.so" > loadmodule "maxfwd.so" > loadmodule "textops.so" > loadmodule "siputils.so" > loadmodule "xlog.so" > loadmodule "sanity.so" > loadmodule "ctl.so" > loadmodule "cfg_rpc.so" > loadmodule "counters.so" > loadmodule "uac.so" > > modparam("uac", "reg_db_url", DBURL) > modparam("uac", "reg_contact_addr", “172.16.176.150:5060") > modparam("uac", "reg_db_table", "uacreg") > modparam("uac", "reg_timer_interval", 10) > modparam("uac", "reg_retry_interval", 10) > > request_route { > route(RELAY); > } > > route[RELAY] { > > t_on_reply("MANAGE_REPLY"); > > if (!t_relay()) { > sl_reply_error(); > } > exit; > } > > And it looks like this has been consumed by Kamailio: > > $ kamcmd uac.reg_dump > { > l_uuid: 2cc6776d-61ed-4ea1-a3ae-055f89bd4d3f > l_username: 126231943099723776 > l_domain: 172.16.176.150 > r_username: 1000 > r_domain: 172.16.176.129 > realm: 172.16.176.129 > auth_username: 1000 > auth_password: password > auth_proxy: sip:172.16.176.129:5080 > expires: 0 > flags: 0 > diff_expires: -1531235076 > timer_expires: 0 > reg_init: 1531234841 > reg_delay: 0 > } > > Doing a refresh successfully reloads the uacreg data > > $ kamcmd uac.reg_refresh 2cc6776d-61ed-4ea1-a3ae-055f89bd4d3f > > I can get Kamailio to forward an OPTIONS message to the remote peer () to > verify network connectivity, e.g. : > > $ru = "sip:1000@172.16.176.129:5080"; > $fs = "udp:172.16.176.150:5060"; > > But Kamailio does not appear to generate REGISTER messages either after > first boot or as a result of the manual refresh. > > This is using an instance of Kamailio 5.0.1. Should I try with a newer > version? > > Is there a way to get extra debugging of the uac module? > > If I increase the debug verbosity, I get quite granular detail for the DB > traffic, but the uac module doesn’t appear to emit much diagnostics. > > Many thanks, > > Ben > > > > > >

2 1

UAC register
by Ben Hood 12 Jul '18

12 Jul '18

Hi, I’m wondering if there is a flag somewhere in the UAC module config that prevents remote registration from happening. It looks like I’ve loaded the uacreg table but I can’t see any REGISTER methods being sent from Kamailio to the remote peer. The remote registrants are loaded using this config: listen=udp:172.16.176.150:5060 loadmodule "db_postgres.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "counters.so" loadmodule "uac.so" modparam("uac", "reg_db_url", DBURL) modparam("uac", "reg_contact_addr", “172.16.176.150:5060") modparam("uac", "reg_db_table", "uacreg") modparam("uac", "reg_timer_interval", 10) modparam("uac", "reg_retry_interval", 10) request_route { route(RELAY); } route[RELAY] { t_on_reply("MANAGE_REPLY"); if (!t_relay()) { sl_reply_error(); } exit; } And it looks like this has been consumed by Kamailio: $ kamcmd uac.reg_dump { l_uuid: 2cc6776d-61ed-4ea1-a3ae-055f89bd4d3f l_username: 126231943099723776 l_domain: 172.16.176.150 r_username: 1000 r_domain: 172.16.176.129 realm: 172.16.176.129 auth_username: 1000 auth_password: password auth_proxy: sip:172.16.176.129:5080 expires: 0 flags: 0 diff_expires: -1531235076 timer_expires: 0 reg_init: 1531234841 reg_delay: 0 } Doing a refresh successfully reloads the uacreg data $ kamcmd uac.reg_refresh 2cc6776d-61ed-4ea1-a3ae-055f89bd4d3f I can get Kamailio to forward an OPTIONS message to the remote peer () to verify network connectivity, e.g. : $ru = "sip:1000@172.16.176.129:5080"; $fs = "udp:172.16.176.150:5060"; But Kamailio does not appear to generate REGISTER messages either after first boot or as a result of the manual refresh. This is using an instance of Kamailio 5.0.1. Should I try with a newer version? Is there a way to get extra debugging of the uac module? If I increase the debug verbosity, I get quite granular detail for the DB traffic, but the uac module doesn’t appear to emit much diagnostics. Many thanks, Ben

2 3

dispatcher module complete tutorial
by SamSung TV 12 Jul '18

12 Jul '18

I want to use kamailio as load balancing server my topo: (Private IP) Kamailio server2 / / (public iP)Kamailio server1(load balance)(Private IP) \ \ (Private IP) Kamailio server1 Any body can recomment me some tutorial to do this? Thanks any advance!

3 2

Kamailio, forking and multiple answer
by Marino Mileti 10 Jul '18

10 Jul '18

Hi guys, i've a Kamailio with forking scenario using addbranch technique.Now I've a problem; i know it's very very very rare but it could be possible so it's better for me to find a solution. A -> B,C,D in forking parallel mode, so B C and D rings simultaneulsy. What is happen if B anser the call, and at the same time C decline the call?It seems that, using my cfg scripts, C sends DECLINE but this message never arrive to A because it receives a 200OK of B. How I can prevent this? I would like that if DECLINE is the first message, all other answers will be ignored (first answer win). Any help or comment? ThanksMarino

2 1

TLS CRL configuration
by Amarnath Kanchivanam 10 Jul '18

10 Jul '18

Hi All, I'm trying to configured kamailio as TLS server with below configuration (tls.cfg) and TLS server is started successfully. [server:default] method = TLSv1+ verify_certificate = yes require_certificate = yes private_key = ./sip/server.key certificate = ./sip/server.crt ca_list = ./bundle.crt crl = ./sip_crl.pem verify_depth = 9 [client:default] verify_certificate = no require_certificate = no TLS connection works fine. Later i have updated the sip_crl.pem with server certificate revoked details and performed tls.reload command to load the latest update. After this I expect any TLS client trying to establish TLS connection should fail, as the client and server certificates are signed by same authority and server certificate is revoked. But the clients are able to establish TLS connection without any errors. I'm not getting any traces to confirm CRL validation has been performed before accepting the TLS connection. Any advice would be help to proceed with evaluating CRL functionality. -Amar

3 5

CPS
by Sergiu Pojoga 10 Jul '18

10 Jul '18

Hi folks, Trying to implement CPS throttling based on this <https://lists.kamailio.org/pipermail/sr-users/2013-September/079713.html>article, having some trouble. modparam("htable", "htable", "rhs=>size=32;initval=0;autoexpire=300;" modparam("htable", "htable", "rhm=>size=32;initval=0;autoexpire=1800;") route[CPS] { $var(rateHashSec) = $si+":sec:"+$timef(%Y/%m/%d_%H_%M_%S); $var(rateHashMin) = $si+":min:"+$timef(%Y/%m/%d_%H_%M_00); xlog("L_INFO", "var(rateHashSec)=$var(rateHashSec); var(rateHashMin)=$var(rateHashMin)\n"); $var(ratePerSec) = $shtinc(rhs=>$var(rateHashSec)); $var(ratePerMin) = $shtinc(rhm=>$var(rateHashMin)); xlog("L_INFO", "var(ratePerSec)=$var(ratePerSec); var(ratePerMin)=$var(ratePerMin)\n"); $var(limitPerSec) = 1; $var(limitPerMin) = 1; if ($var(ratePerSec) > $var(limitPerSec) || $var(ratePerMin) > $var(limitPerMin)) { xlog("L_INFO", "CPS Limit on IP $si\n"); send_reply("503", "CPS Limit on IP $si"); exit; } } Logs show hashes are created but *$var(ratePerSec/Min)* won't increment no matter how many calls I place per second or minute: Jul 9 14:35:52 proxy /usr/local/sbin/kamailio[1484]: INFO: <script>: var(rateHashSec)=65.39.XX.XX:sec:2018/07/09_14_35_52; var(rateHashMin)=65.39.XX.XX:min:2018/07/09_14_35_00 Jul 9 14:35:52 proxy /usr/local/sbin/kamailio[1484]: INFO: <script>: var(ratePerSec)=0; var(ratePerMin)=0 Much obliged. --Sergiu

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users