sr-users

sr-users@lists.kamailio.org

37 participants
37511 discussions

issue when trying to start kamailio using db_postgres and dialplan modules
by David Escartín 04 Oct '17

04 Oct '17

hello all we are having an issue when trying to start kamailio using these modules and a kamailio version higher than 4.2 we install libpq5 and libpq-dev and we always have this error 0(10800) ERROR: <core> [core/sr_module.c:582]: load_module(): could not open module </usr/local/kamailio-5.0/lib64/kamailio/modules/db_postgres.so>: /usr/local/kamailio-5.0/lib64/kamailio/modules/db_postgres.so: undefined symbol: PQconnectdbParams do you know which lib or packet would we miss? we are trying to install it on centos6, ubuntu 10 or centos7 best regards david

2 3

Re: [SR-Users] Manipulate From URI username
by Gertjan Wolzak 04 Oct '17

04 Oct '17

Thank you guys. I am using the s.substring solution, as the uac_replace is done in another route part. Rgds, Gertjan

1 0

Manipulate From URI username
by Gertjan Wolzak 04 Oct '17

04 Oct '17

Hello Kamailions, Im trying to manipulate the username from the from uri, but not having any luck, I must be doing something wrong. I receive a from uri username that is prefixed with 888, now I am trying to remove the triple 8. I have configured the following: line 1090 if($fU=~"^888"){ 1091 strip(3); 1092 } 1093 route(GETGROUP); But I do not get any result, the debug shows the following: 29(9610) exec: *** cfgtrace:request_route=[MOMANX] c=[/usr/local/etc/kamailio/kamailio.cfg] l=1093 a=16 n=if 29(9610) exec: *** cfgtrace:request_route=[MOMANX] c=[/usr/local/etc/kamailio/kamailio.cfg] l=1091 a=45 n=strip 29(9610) exec: *** cfgtrace:request_route=[MOMANX] c=[/usr/local/etc/kamailio/kamailio.cfg] l=1093 a=5 n=route Does anyone see what I am doing wrong? Help would be appreciated. Rgds, Gertjan Wolzak

4 3

"python_exec" not work
by ‪mahsa _a_‬ ‪ 03 Oct '17

03 Oct '17

Iwant to work with "app_python" module,i set “script_name”,“mode_init_function”, “child_init_function” and “python_exec”in kamailio.cfg ,but I have a problem in “python_exec”section. This section not work in correctly, please guide me.thanks

1 0

Debian Stretch
by Jurijs Ivolga 03 Oct '17

03 Oct '17

Hi Guys, I recently tried to use Debian Stretch in production and it didn't went well. On load(500k-700k SIP messages per day) I get a problem that at some point there was a pike of CLOSE_WAIT connections(up to 2k of CLOSE_WAIT connections) and no new connections was possible, I tried to figure out where problem is, but I didn't found anything in system or Kamailio logs, Kamailio just stopped to receive traffic via TCP, but UDP continued to work. Test environment where was no load I didn't faced such issue. Just curious is there anybody who are using Debian Stretch in production without issues? Jurijs

5 7

event_route[usrloc:contact-expired] not called after contact expires
by Yuriy Gorlichenko 02 Oct '17

02 Oct '17

Hi I added this eventroute for manipulate temprorary entires in my subscriber table but it is not called in my cfg. May be i didn't setted up in scf but didnf found any special params for this. I use kamailio 5.0.3 version: kamailio 5.0.3 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 09:39:55 Sep 8 2017 with gcc 4.9.2 My registrar and usrloc modules setted up as usual modparam("registrar", "method_filtering", 1) modparam("registrar", "max_expires", 3600) modparam("registrar", "gruu_enabled", 0) modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 3) modparam("usrloc", "use_domain", MULTIDOMAIN) thx for advice

2 2

sigcomp usage with kamailio
by Ram 02 Oct '17

02 Oct '17

Hi, I need to enable sigcomp with kamailio. Can any one guide me how proceed with that. And its ok to integrate any third party tools like libsigcomp for the same. Regards Raman

2 1

Kamailio htable mod-init route: Main process exited before writing to pipe
by George Diamantopoulos 02 Oct '17

02 Oct '17

Hello all, I've been trying to utilise event_route[htable:mod-init] in order to load information from the database into an htable on startup. However, Kamailio exits with an error for no obvious (to me) reason. Here's the log output: DEBUG: htable [htable.c:226]: child_init(): rank is (-127) DEBUG: htable [htable.c:259]: child_init(): executing event_route[htable:mod-init] (2) DEBUG: <core> [core/parser/msg_parser.c:600]: parse_msg(): SIP Request: DEBUG: <core> [core/parser/msg_parser.c:602]: parse_msg(): method: <OPTIONS> DEBUG: <core> [core/parser/msg_parser.c:604]: parse_msg(): uri: < sip:you@kamailio.org> DEBUG: <core> [core/parser/msg_parser.c:606]: parse_msg(): version: <SIP/2.0> DEBUG: <core> [core/parser/parse_via.c:2639]: parse_via(): end of header reached, state=2 DEBUG: <core> [core/parser/msg_parser.c:491]: parse_headers(): Via found, flags=2 DEBUG: <core> [core/parser/msg_parser.c:493]: parse_headers(): this is the first via ERROR: <core> [core/daemonize.c:303]: daemonize(): Main process exited before writing to pipe And here's the routing block in kamailio.cfg. What I need to do is get the username for all non-expired contacts in the "location" table, perform a query on another database for each one of them and store the result in an htable: event_route[htable:mod-init] { sql_pvquery("ck", "select username from location where now() <= expires", "$avp(registered_ng)"); $var(i) = 0; while ( $(avp(registered_ng)[$var(i)]) != $null ) { sql_pvquery("ca", "select property from tablename where username = $(avp(registered_ng)[$var(i)])", "$var(ng_property)"); $sht(isnguser=>$var(ng_property)) = 1; $var(i) = $var(i) + 1; pv_unset("$var(ng_property)"); } pv_unset("$var(i)"); } Any hints as to what I might be doing wrong? Thanks! Best regards, George

2 5

Regarding ASYNC module in kamailio - handling SIP replies
by Rajagopal Maddi 02 Oct '17

02 Oct '17

Hi, We are checking the kamailio source code for the ASYNC module. The system is working for REQUEST_ROUTE, but not for REPLY_ROUTE. We added the ANY_ROUTE in the cmd_export_t, but still the async_route is not able to suspend for SIP Reply (For example, 401 - Unauthorized). Can we get some help on how to perform this. Some hints on how to perform would really help our development. static cmd_export_t cmds[]={ {"async_route", (cmd_function)w_async_route, 2, fixup_async_route, 0, REQUEST_ROUTE|FAILURE_ROUTE|ANY_ROUTE}, {"async_sleep", (cmd_function)w_async_sleep, 1, fixup_async_sleep, 0, REQUEST_ROUTE|FAILURE_ROUTE|ANY_ROUTE}, {"async_task_route", (cmd_function)w_async_task_route, 1, fixup_async_task_route, 0, REQUEST_ROUTE|FAILURE_ROUTE|ANY_ROUTE}, {0, 0, 0, 0, 0, 0} }; Regards, RajaGopal Maddi

2 1

Hello
by Subba Krishna MG 29 Sep '17

29 Sep '17

Hello, i am using Kamailio for SIP Presence server. When ever the Presence PUBLISH is received on kamailio, kamailio is sending 200 OK with out Expires IE. I want Kamailio to send Expires IE with 200 OK. How do i modify it. Can you please help me in this regard. Thank u MGSK

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users