sr-users

sr-users@lists.kamailio.org

37 participants
37511 discussions

Polycom Presence Routing for PUBLISH Messages
by John Janke 18 Sep '17

18 Sep '17

So I'm using a Polycom VVX 310 with Presence enabled (both on Phone and Kamailio) and the phone is sending SUBSCRIBE messages but not PUBLISH. I have tried various phone configurations without success. The closest thread to my situation I found online said this: "The thing is Polycom phones perform end-to-end subscription to presence event. It worked when I changed the routing configuration to simply relay the SUBSCRIBE request to the monitored device. (I'm using OpenSER as SIP proxy.)" I'm not sure if this is correct as it's from 2012, but in the case that it is I don't quite understand how to implement this. Any help on how to edit the config file? John Janke Progressive Innovation and Automation, Inc. PO BOX 309 Plainfield, IL 60544 Direct: 847.316.9028 Office: 800.688.9051 x 55328 Fax: 630.860.1017

2 1

Re: [SR-Users] Siremis graph time format is a bug!?
by Humberto Rodríguez 18 Sep '17

18 Sep '17

Thanks Daniel-Constantin Mierla, I followed your recommendation, and began to use a date column as INT. Then, I started to insert the date as unix_timestamp, like this (unix_timestamp(now())), which was the only way the graphic showed the date correctly (Active_Failed_Dialogs_4_hours - From 2017-09-15 12:04:01 To 2017-09-15 16:00:01), I failed inserting (now()+0), siremis didn't understand this format too. Cheers, Hto Now No Matter How Hard The Past, You Can Always Begin Again ~ -------------------------------------------- On Thu, 9/14/17, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote: Subject: Re: [SR-Users] Siremis graph time format is a bug!? To: "Humberto Rodríguez" <humberj77(a)yahoo.es>, "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>, sr-users(a)lists.sip-router.org Date: Thursday, September 14, 2017, 4:09 AM Hello, try to set the type of the time column to int, so it is retrieved as numeric timestam, not as formated datetime. Cheers, Daniel On 13.09.17 05:39, Humberto Rodríguez wrote: Hello: I added a graphic to Siremis of my actives dialogs. But, it only shows unix time (From 1969-12-31 19:33:37 To1969-12-31 19:33:37) as Xaxis (19:33). I had siremis 4.2 and never saw it correctly, I just updated to Siremis 4.4 and I see the same problem.Please see the attachment file with the graph, and my configuration files and table bellow Thanks in advance. My /var/www/siremis-4.4.0/siremis/modules/ser/view/xxxx.xml file <?xml version="1.0" standalone="no"?> <EasyView Name="ChartsSumdialogsView" Description="Charts" class="EasyView" Tab="" TemplateEngine="Smarty" Access="SERAdmin.Administer_Modules" TemplateFile="view.tpl"> <FormReferences> <Reference Name="ser.cms.form.ChartsForm"/> </FormReferences> </EasyView> ----------------------------------------------------------- My siremisCharts.xml ---------------------------------------------------------- <ChartGroup name="sumdialogs"> <Chart name="sumdialogs" table="active_dialogs" title="Active_Failed_Dialogs" type="area" order="reverse" orderby="ORDER BY id DESC" limit="LIMIT 10080"> <XAxis>  <Item name="date_created" data="date_created" title="date_created" type="timestamp"/> </XAxis> <YAxis> <Item name="active_dialogs" data="active_dialogs" title="active_dialogs" type="dataset" color="#D02020"/> <Item name="failed_dialogs" data="failed_dialogs" title="failed_dialogs" type="dataset" color="#DFC329"/> </YAxis> </Chart> </ChartGroup> --------------------------------------------------------------------------------------- See bellow, the portion of the table used to build the graphic, the column "date_created" is the problem, and the format is "TIMESTAMP" ------------------------------------------------------------------------------------------ # id, date_created, active_dialogs, early_dialogs, expired_dialogs, failed_dialogs, processed_dialogs, '1', '2017-04-11 14:40:40', '220', '0', '1219', '37', '6879491' '2', '2017-04-11 14:42:02', '206', '0', '1219', '37', '6879604' '3', '2017-04-11 14:43:01', '215', '0', '1219', '37', '6879685' '4', '2017-04-11 14:44:01', '191', '0', '1220', '37', '6879744' '5', '2017-04-11 14:45:02', '203', '0', '1220', '37', '6879837' '9', '2017-04-11 14:46:01', '211', '0', '1220', '37', '6879929' '11', '2017-04-11 14:47:01', '234', '0', '1220', '37', '6880019' '12', '2017-04-11 14:48:01', '222', '0', '1220', '37', '6880087' ---------------------------------------------------------------------------------------------------------------------------------- No Matter How Hard The Past, You Can Always Begin Again ~ _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

2 1

Kamailio Offline Messages
by Jango 17 Sep '17

17 Sep '17

I need help about offline messages this is my full working kamailio.cfg with audio/video call & instant messaging but i need features to receive user offline messages. kamailio.cfg #!KAMAILIO #!define WITH_MYSQL #!define WITH_AUTH #!define WITH_USRLOCDB #!define WITH_PRESENCE #!define WITH_NAT #!define WITH_TLS #!define WITH_ACCDB # # Kamailio (OpenSER) SIP Server v4.2 - default configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: <sr-users(a)lists.sip-router.org> # # Refer to the Core CookBook at http://www.kamailio.org/wiki/ # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable IP authentication execute: # - enable mysql # - enable authentication # - define WITH_IPAUTH # - add IP addresses with group id '1' to 'address' table # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enable database aliases lookup execute: # - enable mysql # - define WITH_ALIASDB # # *** To enable speed dial lookup execute: # - enable mysql # - define WITH_SPEEDDIAL # # *** To enable multi-domain support execute: # - enable mysql # - define WITH_MULTIDOMAIN # # *** To enable TLS support execute: # - adjust CFGDIR/tls.cfg as needed # - define WITH_TLS # # *** To enable XMLRPC support execute: # - define WITH_XMLRPC # - adjust route[XMLRPC] for access policy # # *** To enable anti-flood detection execute: # - adjust pike and htable=>ipban settings as needed (default is # block if more than 16 requests in 2 seconds and ban for 300 seconds) # - define WITH_ANTIFLOOD # # *** To block 3XX redirect replies execute: # - define WITH_BLOCK3XX # # *** To enable VoiceMail routing execute: # - define WITH_VOICEMAIL # - set the value of voicemail.srv_ip # - adjust the value of voicemail.srv_port # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif ####### Include Local Config If Exists ######### import_file "kamailio-local.cfg" ####### Defined Values ######### # *** Value defines - IDs used later in config #!ifdef WITH_MYSQL # - database URL - used to connect to database server by modules such # as: auth_db, acc, usrloc, a.s.o. #!ifndef DBURL #!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!endif #!ifdef WITH_MULTIDOMAIN # - the value for 'use_domain' parameters #!define MULTIDOMAIN 1 #!else #!define MULTIDOMAIN 0 #!endif # - flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags #!define FLT_ACC 1 #!define FLT_ACCMISSED 2 #!define FLT_ACCFAILED 3 #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7 ####### Global Parameters ######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG debug=4 log_stderror=yes #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to disable the auto discovery of local aliases based on reverse DNS on IPs (default on) */ #auto_aliases=no /* add local domain aliases */ alias="jsrver.tk" /* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060 /* port to listen to * - can be specified more than once if needed to listen on many ports */ port=5060 #!ifdef WITH_TLS enable_tls=yes #!endif # life time of TCP connection when there is no traffic # - a bit higher than registration expires to cope with UA behind NAT tcp_connection_lifetime=3605 ####### Custom Parameters ######### # These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id # #!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" pstn.gw_port = "" desc "PSTN GW Port" #!endif #!ifdef WITH_VOICEMAIL # VoiceMail Routing on offline, busy or no answer # # - by default Voicemail server IP is empty to avoid misrouting voicemail.srv_ip = "" desc "VoiceMail IP Address" voicemail.srv_port = "5060" desc "VoiceMail Port" #!endif ####### Modules Section ######## # set paths to location of modules (to sources or installation folders) #!ifdef WITH_SRCPATH mpath="modules/" #!else mpath="/usr/lib64/kamailio/modules/" #!endif #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule "mi_rpc.so" loadmodule "acc.so" # -- for siremis CDRs -------------- loadmodule "rtimer.so" loadmodule "sqlops.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_ALIASDB loadmodule "alias_db.so" #!endif #!ifdef WITH_SPEEDDIAL loadmodule "speeddial.so" #!endif #!ifdef WITH_MULTIDOMAIN loadmodule "domain.so" #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif #!ifdef WITH_NAT loadmodule "nathelper.so" loadmodule "rtpproxy.so" #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif #!ifdef WITH_XMLRPC loadmodule "xmlrpc.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo") # ----- tm params ----- # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) # ----- rr params ----- # set next param to 1 to add value to ;lr param (helps with some UAs) modparam("rr", "enable_full_lr", 0) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- registrar params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # max value for expires of registrations modparam("registrar", "max_expires", 3600) # set it to 1 to enable GRUU modparam("registrar", "gruu_enabled", 0) # ----- acc params ----- /* what special events should be accounted ? */ modparam("acc", "early_media", 0) modparam("acc", "report_ack", 0) modparam("acc", "report_cancels", 0) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "log_flag", FLT_ACC) modparam("acc", "log_missed_flag", FLT_ACCMISSED) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", FLT_ACC) modparam("acc", "db_missed_flag", FLT_ACCMISSED) modparam("acc", "db_url", DBURL) modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;src_ip=$si;" "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif # ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL) modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", MULTIDOMAIN) #!endif # ----- auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "load_credentials", "") modparam("auth_db", "use_domain", MULTIDOMAIN) # ----- permissions params ----- #!ifdef WITH_IPAUTH modparam("permissions", "db_url", DBURL) modparam("permissions", "db_mode", 1) #!endif #!endif # ----- alias_db params ----- #!ifdef WITH_ALIASDB modparam("alias_db", "db_url", DBURL) modparam("alias_db", "use_domain", MULTIDOMAIN) #!endif # ----- speeddial params ----- #!ifdef WITH_SPEEDDIAL modparam("speeddial", "db_url", DBURL) modparam("speeddial", "use_domain", MULTIDOMAIN) #!endif # ----- domain params ----- #!ifdef WITH_MULTIDOMAIN modparam("domain", "db_url", DBURL) # register callback to match myself condition with domains list modparam("domain", "register_myself", 1) #!endif #!ifdef WITH_PRESENCE # ----- presence params ----- modparam("presence", "db_url", DBURL) # ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) #!endif #!ifdef WITH_NAT # ----- rtpproxy params ----- modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") # ----- nathelper params ----- modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org") # params needed for NAT traversal in other modules modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB) #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "//etc/kamailio/tls.cfg") #!endif #!ifdef WITH_ANTIFLOOD # ----- pike params ----- modparam("pike", "sampling_time_unit", 2) modparam("pike", "reqs_density_per_unit", 16) modparam("pike", "remove_latency", 4) # ----- htable params ----- # ip ban htable with autoexpire after 5 minutes modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_XMLRPC # ----- xmlrpc params ----- modparam("xmlrpc", "route", "XMLRPC"); modparam("xmlrpc", "url_match", "^/RPC") #!endif #!ifdef WITH_DEBUG # ----- debugger params ----- modparam("debugger", "cfgtrace", 1) modparam("debugger", "log_level_name", "exec") #!endif modparam("rtimer", "timer", "name=cdr;interval=300;mode=1;") modparam("rtimer", "exec", "timer=cdr;route=CDRS") modparam("sqlops", "sqlcon", "cb=>mysql://kamailio:kamailiorw@localhost/kamailio") ####### Routing Logic ######## # Main SIP request routing logic # - processing of any incoming SIP request starts with this route # - note: this is the same as route { ... } request_route { # per request initial checks route(REQINIT); # NAT detection route(NATDETECT); # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); } exit; } # handle requests within SIP dialogs route(WITHINDLG); ### only initial requests (no To tag) # handle retransmissions if(t_precheck_trans()) { t_check_trans(); exit; } t_check_trans(); # authentication route(AUTH); # record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(FLT_ACC); # do accounting } # dispatch requests to foreign domains route(SIPOUT); ### requests for my local domains # handle presence related requests route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # dispatch destinations to PSTN route(PSTN); # user location service route(LOCATION); } # Wrapper for relaying requests route[RELAY] { # enable additional event routes for forwarded requests # - serial forking, RTP relaying handling, a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); } if (is_method("INVITE|SUBSCRIBE|UPDATE")) { if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); } if (is_method("INVITE")) { if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); } if (!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP and traffic ban for a while # be sure you exclude checking trusted peers, such as pstn gateways # - local host excluded (e.g., loop to self) if(src_ip!=myself) { if($sht(ipban=>$si)!=$null) { # ip is already blocked xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) { xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } if($ua =~ "friendly-scanner") { sl_send_reply("200", "OK"); exit; } #!endif if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if(is_method("OPTIONS") && uri==myself && $rU==$null) { sl_send_reply("200","Keepalive"); exit; } if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs route[WITHINDLG] { if (!has_totag()) return; # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { route(DLGURI); if (is_method("BYE")) { setflag(FLT_ACC); # do accounting ... setflag(FLT_ACCFAILED); # ... even if the transaction fails } else if ( is_method("ACK") ) { # ACK is forwarded statelessy route(NATMANAGE); } else if ( is_method("NOTIFY") ) { # Add Record-Route for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY); exit; } if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe requests route(PRESENCE); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # no loose-route, but stateful ACK; # must be an ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit; } else { # ACK without matching transaction ... ignore and discard exit; } } sl_send_reply("404","Not here"); exit; } # Handle SIP registrations route[REGISTRAR] { if (!is_method("REGISTER")) return; if(isflagset(FLT_NATS)) { setbflag(FLB_NATB); #!ifdef WITH_NATSIPPING # do SIP NAT pinging setbflag(FLB_NATSIPPING); #!endif } if (!save("location")) sl_reply_error(); exit; } # User location service route[LOCATION] { #!ifdef WITH_SPEEDDIAL # search for short dialing - 2-digit extension if($rU=~"^[0-9][0-9]$") if(sd_lookup("speed_dial")) route(SIPOUT); #!endif #!ifdef WITH_ALIASDB # search in DB-based aliases if(alias_db_lookup("dbaliases")) route(SIPOUT); #!endif $avp(oexten) = $rU; if (!lookup("location")) { $var(rc) = $rc; route(TOVOICEMAIL); t_newtran(); switch ($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit; case -2: send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also if (is_method("INVITE")) { setflag(FLT_ACCMISSED); } route(RELAY); exit; } # Presence server processing route[PRESENCE] { if(!is_method("PUBLISH|SUBSCRIBE")) return; if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") { route(TOVOICEMAIL); # returns here if no voicemail server is configured sl_send_reply("404", "No voicemail service"); exit; } #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; } if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; } # IP authorization and user authentication route[AUTH] { #!ifdef WITH_AUTH #!ifdef WITH_IPAUTH if((!is_method("REGISTER")) && allow_source_address()) { # source IP allowed return; } #!endif if (is_method("REGISTER") || from_uri==myself) { # authenticate requests if (!auth_check("$fd", "subscriber", "1")) { auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth header if(!is_method("REGISTER|PUBLISH")) consume_credentials(); } # if caller is not local subscriber, then check if it calls # a local destination, otherwise deny, not an open relay here if (from_uri!=myself && uri!=myself) { sl_send_reply("403","Not relaying"); exit; } #!endif return; } # Caller NAT detection route[NATDETECT] { #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER")) { fix_nated_register(); } else { if(is_first_hop()) set_contact_alias(); } setflag(FLT_NATS); } #!endif return; } # RTPProxy control and singaling updates for NAT traversal route[NATMANAGE] { #!ifdef WITH_NAT if (is_request()) { if(has_totag()) { if(check_route_param("nat=yes")) { setbflag(FLB_NATB); } } } if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; rtpproxy_manage("co"); if (is_request()) { if (!has_totag()) { if(t_is_branch_route()) { add_rr_param(";nat=yes"); } } } if (is_reply()) { if(isbflagset(FLB_NATB)) { if(is_first_hop()) set_contact_alias(); } } #!endif return; } # URI update for dialog requests route[DLGURI] { #!ifdef WITH_NAT if(!isdsturiset()) { handle_ruri_alias(); } #!endif return; } # Routing to foreign domains route[SIPOUT] { if (uri==myself) return; append_hf("P-hint: outbound\r\n"); route(RELAY); exit; } # PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; } # route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; # only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; } if (strempty($sel(cfg_get.pstn.gw_port))) { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); } else { $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" + $sel(cfg_get.pstn.gw_port); } route(RELAY); exit; #!endif return; } # XMLRPC routing #!ifdef WITH_XMLRPC route[XMLRPC] { # allow XMLRPC from localhost if ((method=="POST" || method=="GET") && (src_ip==127.0.0.1)) { # close connection only for xmlrpclib user agents (there is a bug in # xmlrpclib: it waits for EOF before interpreting the response). if ($hdr(User-Agent) =~ "xmlrpclib") set_reply_close(); set_reply_no_connect(); dispatch_rpc(); exit; } send_reply("403", "Forbidden"); exit; } #!endif # Routing to voicemail server route[TOVOICEMAIL] { #!ifdef WITH_VOICEMAIL if(!is_method("INVITE|SUBSCRIBE")) return; # check if VoiceMail server IP is defined if (strempty($sel(cfg_get.voicemail.srv_ip))) { xlog("SCRIPT: VoiceMail rotuing enabled but IP not defined\n"); return; } if(is_method("INVITE")) { if($avp(oexten)==$null) return; $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } else { if($rU==$null) return; $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip) + ":" + $sel(cfg_get.voicemail.srv_port); } route(RELAY); exit; #!endif return; } # ====================================================== # Populate CDRs Table of Siremis # ====================================================== route[CDRS] { sql_query("cb","call kamailio_cdrs()","rb"); sql_query("cb","call kamailio_rating('default')","rb"); } # Manage outgoing branches branch_route[MANAGE_BRANCH] { xdbg("new branch [$T_branch_idx] to $ru\n"); route(NATMANAGE); } # Manage incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if(status=~"[12][0-9][0-9]") route(NATMANAGE); } # Manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE); if (t_is_canceled()) { exit; } #!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif #!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif }

2 1

Dispatcher Module with ds_is_from_list function
by Ilie Soltanici 17 Sep '17

17 Sep '17

Hello, "ds_is_from_list" function from Dispatcher module give false result - when actually it should be true. modparam("dispatcher", "db_url",DBURL) modparam("dispatcher", "table_name", "dispatcher") modparam("dispatcher", "setid_col", "setid") modparam("dispatcher", "destination_col", "destination") modparam("dispatcher", "flags", 2) modparam("dispatcher", "dst_avp", "$avp(AVP_DST)") modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)") modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)") modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)") request_route { xlog("L_INFO","[=Start Routing=]") if(ds_is_from_list()) { xlog("L_INFO","[=FROM ASTERISK=]"); } else { xlog("L_INFO","[=TO ASTERISK=]"); } if($si=="192.168.1.10") { xlog("L_INFO","[=FROM ASTERISK BY IP=]"); } else { xlog("L_INFO","[=TO ASTERISK BY IP=]"); } root@kamailio:/var/log# kamctl dispatcher show dispatcher gateways +----+-------+---------------------+-------+----------+-------+-----------------+ | id | setid | destination | flags | priority | attrs | description | +----+-------+---------------------+-------+----------+-------+-----------------+ | 1 | 1 | sip:192.168.1.10:5060 | 0 | 3 | | Main Asterisk | | 2 | 2 | sip:192.168.1.11:5060 | 0 | 2 | | Backup Asterisk | | 3 | 3 | sip:192.168.1.12:5060 | 0 | 1 | | Test Asterisk | +----+-------+---------------------+-------+----------+-------+-----------------+ root@kamailio:/var/log# cat /var/log/kamailio.log [=Start Routing=] [=TO ASTERISK=] [=FROM ASTERISK BY IP=] Additional Information - SIP Packet 2017/09/15 19:21:57.589451 192.168.1.50:5061 -> 192.168.1.1:5060 REGISTER sip:192.168.1.1 SIP/2.0 Via: SIP/2.0/UDP 192.168.1.50:5061;branch=z9hG4bK-5219-1-0 From: sip:10@192.168.1.50;tag=1 To: sip:10@192.168.1.50 Call-ID: 1-5219(a)192.168.1.50 CSeq: 1 REGISTER Contact: sip:10@192.168.1.50:5061 Max-Forwards: 10 Expires: 120 User-Agent: SIPp/Win32 Content-Length: 0 - Kamailio Version - output of kamailio -v root@kamailio:/var/log# kamailio -v version: kamailio 5.0.3 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 12:12:14 Sep 7 2017 with gcc 6.3.0 root@kamailio:/var/log# - Operating System: Debian 9.1/ Linux kamailio1 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u3 (2017-08-06) x86_64 GNU/Linux Is this a bug or something wrong with configuration? Thank you

2 1

Implementing C or Java file in kamailio
by Logeshwaran G 15 Sep '17

15 Sep '17

Hi, Is there any way to implement my own C or Java program in kamailio.cfg to Validate my own scenarios? Thanks & Kind Regards, *Logeshwaran G* *"Be Hungry, Stay Foolish"*

3 2

Replacing the From header user part.
by vivek＠advaitamtech.com 15 Sep '17

15 Sep '17

Hi All, Am trying to replace the user part of From header with own user name in kamailio.cfg I tried to assign directly, Eg: $fU = "abcd" Sometime when I receive From header as ' "12345" <12345(a)1.1.1.1>;tag=xxxx '. In this case it works as ' "12345" <abcd(a)1.1.1.1>;tag=xxxx ' . So i tried using replace_all() function. But this ended up adding extra characters(in my case "abcd") infront of content_type header. I dont know why. Can someone please help me out in replacing the from header in this case? Thanks, Vivek

2 2

Maximum Registration on Kamailo??
by amit Kumar 14 Sep '17

14 Sep '17

Hi All, kamctl ul show => show below result, does that mean max 1024 contact can be registered, if that is the case how to increase the max registration limit. Domain:: location table=*1024 *records=2 max_slot=1 Thanks

3 2

kamailio - multiple asterisk and chanspy
by Жан Базаров 14 Sep '17

14 Sep '17

Hello! how i can use asterisk's chanspy_app in kamailio-loadbalance-asterisk system?

2 1

Killing Calls for a Profile
by Sunil More 14 Sep '17

14 Sep '17

Hello All, Is there a method / command to kill calls related to one dialog profile. Right now i have to find all dialogs for a customer and loop through all the dialog hashes to run kamcmd dlg.end_dlg till i can kill all calls. Is there a easier way to do this. Thanking You, Sunil More Ph : 9503338275

2 4

Siremis "Chat Service" time format has bug or is only config issue??
by Humberto Rodríguez 14 Sep '17

14 Sep '17

Hello: I added a graphic to Siremis of my actives dialogs. But, it only shows unix time (From 1969-12-31 19:33:37 To1969-12-31 19:33:37) as Xaxis (19:33). I had version 4.2 and never saw it correctly, I just updated to version 4.4 and I see the same problem.Please see the attachment file with the graph, and my configuration files and table bellow Thanks in advance. My /var/www/siremis-4.4.0/siremis/modules/ser/view/xxxx.xml file ?xml version="1.0" standalone="no"?> <EasyView Name="ChartsSumdialogsView" Description="Charts" class="EasyView" Tab="" TemplateEngine="Smarty" Access="SERAdmin.Administer_Modules" TemplateFile="view.tpl"> <FormReferences> <Reference Name="ser.cms.form.ChartsForm"/> </FormReferences> </EasyView> ----------------------------------------------------------- My siremisCharts.xml ---------------------------------------------------------- > <ChartGroup name="sumdialogs"> > > <Chart name="sumdialogs" table="active_dialogs" > title="Active_Failed_Dialogs" type="area" order="reverse" > > > orderby="ORDER BY id DESC" limit="LIMIT 10080"> > > <XAxis> >  > > <Item > name="date_created" data="date_created" title="date_created" > type="timestamp"/> > > </XAxis> > > <YAxis> > > <Item > name="active_dialogs" data="active_dialogs" > title="active_dialogs" type="dataset" color="#D02020"/> > > > <Item > name="failed_dialogs" data="failed_dialogs" > title="failed_dialogs" type="dataset" color="#DFC329"/> > > </YAxis> > </Chart> > </ChartGroup> > --------------------------------------------------------------------------------------- See bellow, the portion of the table used to build the graphic, the column "date_created" is the problem, and the format is "TIMESTAMP" > ------------------------------------------------------------------------------------------ > > > # id, date_created, active_dialogs, > early_dialogs, expired_dialogs, failed_dialogs, > processed_dialogs, > '1', '2017-04-11 14:40:40', '220', '0', > '1219', '37', '6879491' > '2', '2017-04-11 14:42:02', '206', '0', > '1219', '37', '6879604' > '3', '2017-04-11 14:43:01', '215', '0', > '1219', '37', '6879685' > '4', '2017-04-11 14:44:01', '191', '0', > '1220', '37', '6879744' > '5', '2017-04-11 14:45:02', '203', '0', > '1220', '37', '6879837' > '9', '2017-04-11 14:46:01', '211', '0', > '1220', '37', '6879929' > '11', '2017-04-11 14:47:01', '234', > '0', '1220', '37', '6880019' > '12', '2017-04-11 14:48:01', '222', > '0', '1220', '37', '6880087' > > ----------------------------------------------------------------------------------------------------------------------------------

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users