sr-users

sr-users@lists.kamailio.org

37 participants
37511 discussions

Kamailio APP_LUA
by santosh gupta 23 Aug '17

23 Aug '17

Hi Robert, Hope you are doing good. You have helped me in the past. I need to set LCR via app_lua, getting rates and destination from mysql. Link which i am following is https://www.kamailio.org/wiki/embeddedapi/4.0.x/lua The issue is I am not able to get connect via sr commands for example sr.sqlops.query("connection", "query", "result") What should be exactly is "connection", "query", "result" Error I am getting in syslog is /usr/local/kamailio/etc/kamailio/kamailio.lua:1: attempt to index field 'sqlops' (a nil value) I am using kamailio 5.0.2 A little bit of headsup will help me. Thanks a lot again. -- Regards Santosh Gupta +91 9323043570 <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 2

Query in Dialplan module
by Logeshwaran G 23 Aug '17

23 Aug '17

Hi, I have one query in Dialplan module, my scenario is If I call 22291+++++++++ the first three digit should remove and the call place to 91+++++++. But i dont get the exact result, the first three digits are not removing. I have used the below rules: Lcr_rule table: ============ id: 5 lcr_id: 2 Prefix:22291 Request uri: NULL Stopper: 1 Enabled: 1 LCR_rule_target: ================== id:3 lcr_id:2 rule_id:5 gw:id:2 priority:1 weight:1 Dialplan table: ============= id:3 dpid:2 pr:1 match_op:1 match_exp: ^222[0-9]+$ subst_exp: ^222[0-9]+$ repl_exp:\1 Is it correct or not, Please guide me. Thanks & Kind Regards, Logeshwaran G

2 3

Set up caller ID
by Nelson Migliaro 23 Aug '17

23 Aug '17

Hello, I have several Asterisk sending calls to a centralizad Kamailio. I would like this Kamailio to set up the caller id number of the calls. I am using the uac_replace_from function but I would like to pull the caller id from a database to set up the number based on the sip vendor the call is forwarded What would be the correct way to do that? I was thinking of: sql_query("ca", "select ddi from ddi_table where xxx= $rU limit 1", "ra"); $avp(dnis) = $dbr(ra=>[0,0]); sql_result_free("ra"); But I am afraid of causing a bottheneck on the database. As usual, thank you for the help. Regards, Nelson.-

2 1

rtpproxy rtp timeout
by yu＠yu-boot.ru 23 Aug '17

23 Aug '17

Hello. What version of rtpproxy app should be used for this feature to work with Kami? How to use it correctly? -- Отправлено из myMail для Android

3 4

snmpstats get calls that have ended in 5xx cause code
by Olli Attila 23 Aug '17

23 Aug '17

Hello, I have Kamailio 5.0 configured with snmpstats module. I can succesfully query for eg. the current num of dialogs on kamailio by issuing: snmpget -v 2c -c public localhost KAMAILIO-MIB::kamailioCurNumDialogs.0 KAMAILIO-MIB::kamailioCurNumDialogs.0 = Gauge32: 0 Is it possible to make query about calls that have ended with 5xx sip cause code on last 5min or 15min? I noticed that the following is available on the snmpstats module but it only holds a counter that keeps increasing until I restart kamailio process: snmpget -v 2c -c public localhost KAMAILIO-MIB::kamailioTotalNumFailedDialogSetups.0 Also I think the above includes all cause codes that are between 3xx-6xx. Cheers, --Olli

1 0

cr reload in xmlrpc
by Logeshwaran G 23 Aug '17

23 Aug '17

Hi, It is the correct way of using the cr reload command in xmlrpc through postman? <?xml version='1.0'?> <methodCall> *<methodName>cr.reload</methodName>* </methodCall> Thanks & Kind Regards, Logeshwaran G

2 6

Save original $fU, $rU
by yu＠yu-boot.ru 22 Aug '17

22 Aug '17

Have a problem with Asterisk. When callee behind Asterisk hangs up first, it sends back BYE with swapped From and To fields, which affects Kami CDRs rendering them useless. I've tried to save original From/To to AVPs on initial INVITE but they are empty when CDR is written. How to solve this? -- Отправлено из myMail для Android

3 2

dp_translate_cr_route, R-URI
by Yu Boot 22 Aug '17

22 Aug '17

Hello. #cut off prefix "9" dp_translate("1"); ... #searching in db by called number without prefix... if(!cr_route("default", "default", "$rU", "$rU", "call_id")){ ... and failing. Is it normal behavior that cr_route "sees" original $rU even after dp_translate manipulations?

1 0

Kamailio / Asterisk and multidomain
by Cyrille Demaret 22 Aug '17

22 Aug '17

Hi, I'm new to Kamailio and I'm trying to use it as a front SIP proxy to one or more asterisk. Unlike to the "Kamailio 4.0.x and Asterisk 11.3.0 Realtime Integration" tutorials, I would like to let Kamailio handle registrations, calls between users and other basic functionalities. Asterisk will only handle advanced features like voicemail, advanced dialplan configuration,. My problem is that It needs to be multidomain. My network will be as follow with 2 network interfaces for Kamailio and a private lan between Kamailio and Asterisk : Public interface ip 1.2.3.4 ----> [Kamailio] <----- Private interface 192.168.100.10 <----------------> 192.168.100.11 [Asterisk] When I send a call to asterisk, the domain is sent in the from field of the INVITE and I can do what I need on the Asterisk dialplan (I can get the SIP domain using the ${SIPDOMAIN} variable). My problem is when I need to send a call back to Kamailio for example to reach another user of the domain. I'm using Asterisk 14 with PJSIP with the following config : [kamailio] type=endpoint transport=transport-udp context=from-kamailio disallow=all allow=ulaw aors=kamailio [kamailio] type=aor contact=sip:192.168.100.10:5060 [kamailio] type=identify endpoint=kamailio match=192.168.100.10 If I use this dial string in my Asterisk dialplan "PJSIP/ kamailio /sip:200@testdomain.com", Asterisk contact directly testcomain.com without going through the local IP of my Kamailio. I can't send a domain to Kamailio in the INVITE request. Does anyone can help me on this or maybe simply tell me that I'm not going to the good direction? :) Thank you, Cyrille

3 3

Siremis - can't add carrier without prefix/suffix
by Yu Boot 22 Aug '17

22 Aug '17

Hello Suddenly revealed that I can't add carriers without rewrite_prefix/rewrite_suffix via Siremis. But I don't need these fields! And kamctl adds these rules fine. What's a problem? Screenshot with error http://tinypic.com/r/68v493/9

2 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users