sr-users

sr-users@lists.kamailio.org

54 participants
37560 discussions

How to relay SIP messages to specific registered user in Kamailio?
by o.atef＠fiberme.com 02 Apr '24

02 Apr '24

Hello guys, I'm recently new player in Kamailio SIP server and want to use it as SIP proxy server to Asterisk PBX server. first of all, I've successfully registered my Asterisk to Kamailio as user "test" to get its "location" because my Asterisk is behind NAT. Simply now I want to relay SIP messages to this user's location to receive them all in Asterisk. After I searched, I found this function rewritehost() but it needs to be a host or IP address, but in my case I want some way or function to relay to user "test" and then it well get the user location from Kamailio datebase automatically? I hope it's clear XD I tried to find a way to do MSQL query in kamalio.cfg to get the user contact from "location" table and then relay to the result but it did not work. I guess that I did it in wrong way but finally the Kamailio tutorials are so rare on google. Thanks in advance, Omar

5 10

Can we discuss the internals of Kamailio's routing logic and how to customize it for specific needs?
by Inextrix Technologies Pvt Ltd 28 Mar '24

28 Mar '24

This question digs into the heart of Kamailio's functionality. It asks about: Routing Logic: How Kamailio decides where to send SIP messages (calls, registrations, etc.) based on various factors like caller ID, destination number, or custom rules. Customization: How you can modify this built-in logic to fit your specific needs. This could involve using scripting languages, manipulating SIP messages, or defining custom routing rules. The discussion would be for developers who want to unlock Kamailio's full potential and tailor it for their unique VoIP deployments. Visit us for More Info : https://inextrix.com/services/kamailio-development/

2 1

Callee details not visible in dialog
by egemen ulus 28 Mar '24

28 Mar '24

Hi, I am wondering why callee info is not visible in dialog details: Here is the case: client-1 > kamailio > two asterisks > kamailio > client-2 registration is on asterisk. dialog module is enabled and I want to see the asterisk IP that is determined by dispatcher module. I have tried to put dlg_manage function even after dispatch function, but did not help. I have also tried to update to header before dlg_manage function, it didn't help either. Any way to have asterisk IP in dialog details. It shows only this: { h_entry: 483 h_id: 8644 ref: 1 call-id: v489LdfOFD5mnlHupQHOvw.. from_uri: sip:1515@12.12.12.12;transport=UDP to_uri: sip:2222@12.12.12.12 state: 5 start_ts: 0 init_ts: xxxx end_ts: xxxx duration: xxxx timeout: 0 lifetime: 3600 dflags: 512 sflags: 0 iflags: 0 caller: { tag: d0283007 contact: sip:1515@1.1.1.1:64966;transport=UDP cseq: 1 route_set: socket: udp:172.22.10.10:5060 } callee: { tag: <null string> contact: <null string> cseq: <null string> route_set: <null string> socket: <null string> } profiles: { } variables: { } } Regards Get Outlook for Android<https://aka.ms/AAb9ysg>

1 0

[Presence] Updating route information for SIP NOTIFY when re-SUBSCRIBE
by Denys Pozniak 26 Mar '24

26 Mar '24

Hello! In my architecture, SIP SUBSCRIBE messages can reach the Kamailio Presence server in several ways. And I noticed that re-SUBSCRIBEs messages do not update the record_route field in the active_watchers table (MySQL), so subsequent SIP NOTIFY messages do not inherit it and have the routes set of the initial SIP SUBSCRIBE message. Is there any way to change this behavior? modparam("presence", "db_url", DBURL) modparam("presence", "subs_db_mode", 3) modparam("presence", "timeout_rm_subs", 0) modparam("presence", "expires_offset", 0) modparam("presence", "max_expires", 1800) modparam("presence", "db_update_period", 30) modparam("presence", "clean_period", 180) modparam("presence", "send_fast_notify", 1) modparam("presence", "pres_htable_size", 32) modparam("presence", "subs_htable_size", 32) modparam("presence", "publ_cache", 0) modparam("presence", "notifier_processes", 0) # kamailio -v version: kamailio 5.1.2 (x86_64/linux) -- BR, Denys Pozniak

3 4

RFC: move app_lua_sr to kamailio-archive
by Victor Seva 26 Mar '24

26 Mar '24

Hi, I would like to move app_lua_sr to kamailio-archive but I would like to hear if anyone out there has a solid reason not to do it. Since we have app_lua as KEMI for a long time I think is time to retire the old remains of app_lua Cheers -- ----------------------------------------------------------------- | ,''`. Victor Seva | | : :' : linuxmaniac(a)torreviejawireless.org | | `. `' PGP: 8F19 CADC D42A 42D4 5563 730C 51A0 9B18 CF5A 5068 | | `- Debian Developer | -----------------------------------------------------------------

1 0

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

4 9

RTP Engine with Kamailio
by Vishal Pai 22 Mar '24

22 Mar '24

Hello Everyone. I am looking for documentation to have multiple RTP Engine servers connected with kamailio using db url and balance the load accordingly. Thanks

4 3

Kamailio to aid in seamless data center migration?
by Brad 21 Mar '24

21 Mar '24

I need to move a few dozen FreePBXen with some commercial modules running in individual VMs to a new data center. I’m trying to work out a plan to move the PBXes to the new data center in a way that will be transparent to the endpoints, or at the very least with the absolute minimum of downtime. Some of the installations are rather old, and there’s a handful of peculiarities on each, so the typical FreePBX backup/restore process hasn’t gone smoothly, at least in our tests. My current train of thought is to put a clone the VMs in the new data center and use Kamailio to route the SIP traffic to the new servers/IPs. I’ve never used it before, so I may be barking up the wrong tree, but it /appears/ to do what I’m suggesting. If so, I’m thinking I can install Kamailio on each VM, point it to the local asterisk/FreePBX initially, and clone the VM. Then, after the new instance is up and running, point Kamailio on the original VM to the cloned VM's asterisk, after which I can make appropriate DNS changes. Another option would be to stand up a single Kamailio server and redirect SIP traffic destined for individual asterisk servers to it at the router. Endpoints are mostly Yealink, and I’m not sure if they’ll feel the need to restart when the registration/SIP server’s IP changes, but a quick bounce when not in use isn’t the end of the world. I’d very much like to avoid having to send an update to each phone manually, but I can script a SIP NOTIFY if required. Anything stupid, wrong, ignorant, or just smelly about this tactic? Or, for that matter, any other suggestions?

2 1

RFC5626 Keep-Alive with CRLF
by Ihor Olkhovskyi 21 Mar '24

21 Mar '24

Hello, A bit generic question, does Kamailio supports CRLF keepalive per https://www.rfc-editor.org/rfc/rfc5626#section-4.4.1 ? It's more for tracking TCP connection states, as seems tcp_keepalive_enable is not super reliable especially in mobile networks. -- Best regards, Ihor (Igor)

3 5

Branch Route trigger for Withindialog calls?
by Benoit Panizzon 21 Mar '24

21 Mar '24

Hi List I am just wondering... When I am sending the initial INVITE to a customer CPE, this goes throug the whole location lookup and through a branch route in which I make some last adjustments to the headers, like removing header the customer shall not get (like P-Asserted-Identity which would reveal the caller identity on a callerid restricted call). On a Re-Invite (session timer refresh) the call is being routed by loose_route() and immediately sent to RELAY. uac_replace and uac_restore seem to work fine for stuff like To and From Header. But how do I prevent unwanted header to disclose information to the customer which should ne be disclosed? Do I need to re-arm the branch trigger also for within dialog calls? Mit freundlichen Grüssen -Benoît Panizzon- -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users