sr-users

sr-users@lists.kamailio.org

42 participants
37518 discussions

kamctl cr reload got 500 failed to re-built tree
by Igor Potjevlesch 25 Jan '17

25 Jan '17

Hello, With more than 173k entriers into carrierroute, now I'm doing "kamctl cr reload", I got the following reply: 500 failed to re-built tree, see log What could going wrong? Regards, Igor. --- L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast. https://www.avast.com/antivirus

2 4

Issue with From address being modified in ACK when UAC module used version 4.1
by Jonathan Hunter 25 Jan '17

25 Jan '17

Hi Guys, running kamailio 4.1.4 and using uac_replace_from, I am seeing a strange issue with the proxying of an ACK message back from a carrier to freeswitch on the ingress path into a network. So its just a normal call inbound, where on outbound leg we modify the From address, on the inbound leg all remains the same. Now after the ingress side receives the 200ok, it sends an ACK as below; ACK sip:+441624111111@192.168.24.8:5080;transport=udp SIP/2.0 Via: SIP/2.0/UDP 4.4.4.4:5060;branch=z9hG4bK+7f5c8c756ae3b26a956b33b88c77c29f1+sip+3+aa6d1466 Call-ID: 8791dbd3855eeafd484f397de6e2f76e(a)carrier.peering.telecom.im From: "+44792498881474" <sip:+44792498881474@192.168.24.8:5080;user=phone>;tag=carrier.peering.telecom.im+3+863d20a3+1b9801d2 To: "+441624111111" <sip:+441624111111@8.8.8.8:5080;user=phone>;tag=6rrtgNFQDNrFF CSeq: 1 ACK Contact: <sip:4.4.4.4:5060> Route: <sip:192.168.24.8;lr=on;ftag=carrier.peering.telecom.im+3+863d20a3+1b9801d2;vsf=AAAAAAAAAAYNBgAPAAgLAgZ3UTMACgBXFUsVFwwcDkAKTwMZGh0YAA8KDkEEQ1NYC0NDXgdOFRpSHg1vbmU-> Content-Length: 0 Max-Forwards: 68 However kamailio changes the From address; ACK sip:+441624111111@192.168.24.8:5080;transport=udp SIP/2.0 Via: SIP/2.0/UDP 109.73.69.165:5060;branch=z9hG4bKc1ce.47974fc3da2b669a78f2dcc9a057a127.0 Via: SIP/2.0/UDP 4.4.4.4:5060;rport=5060;branch=z9hG4bK+7f5c8c756ae3b26a956b33b88c77c29f1+sip+3+aa6d1466 Call-ID: 8791dbd3855eeafd484f397de6e2f76e(a)carrier.peering.telecom.im From: "+44792498881474" <sip:+441444680332@es132y$}-9>.8n?~9,*%(;zyk393;7e&C^NRone>;tag=carrier.peering.telecom.im+3+863d20a3+1b9801d2 To: "+441624111111" <sip:+441624111111@8.8.8.8:5080;user=phone>;tag=6rrtgNFQDNrFF CSeq: 1 ACK Contact: <sip:4.4.4.4:5060> Content-Length: 0 Max-Forwards: 67 Causing FreeSWITCH to not recognise the request, and therefore not send an ACK. There are no rules set against the ACK processing. Has anyone seen this before? We dont know when it started happening which doesnt help, I will look to setup debug on test environment but just wondered if this is an issue thats been seen before? Many thanks in advance. Jon

2 5

Event when acc is written?
by Tobias 25 Jan '17

25 Jan '17

Hi! I'm wondering if there is a way for the acc-module to notify/send an event to Kamailio (so I can pick it up from the config, similar to event_route) once the acc-module has performed a write? As an example I'm using acc and db-mysql to store acc data in MySQL, but instead of having a service polling the MySQL for new acc's written I'd like to make Kamailio send an event once an acc-row has been written. I realize this could most likely be done by using MySQL triggers "ON INSERT", but I'm wondering if there is another (reliable) way to do this directly from within Kamailio? I haven't tested it, but I would guess that if I tried to use for example event_route[dialog:end] there could be times where the event would hit Kamailio before the acc-module have written to missed_calls? Thanks! /Tobias

4 11

Executing perl script with command line parameters.
by Venkatesh Macha 25 Jan '17

25 Jan '17

Hi all, I am trying to execute external Perl script from the Kamailio config file. My script accepts few command line parameters but if I try to pass command line parameters like below, It is not working. exec_msg("/root/test.pl 10000 '$var(env)' '$fU'"); # i tried with exec_avp also How to execute the external Perl scripts with few arguments. Thank you in Advance. -- View this message in context: http://sip-router.1086192.n5.nabble.com/Executing-perl-script-with-command-… Sent from the Users mailing list archive at Nabble.com.

2 1

Re: [SR-Users] How does Kamailio decide which protocol to use when fwding to another proxy?
by Pranathi Venkatayogi 25 Jan '17

25 Jan '17

In the case below though TLS session is established between proxy1 and proxy2, invite is fwded on UDP. 1. How to force Kamailio to use existing tls session to communicate? (proxy1) 2. What is the command to look at if existing tls sessions are present from proxy1 a. kamcmd tls.list does it, but I need one which works from within config. From: Pranathi Venkatayogi Sent: Tuesday, January 24, 2017 11:02 AM To: 'Kamailio (SER) - Users Mailing List' <sr-users(a)lists.sip-router.org> Subject: How does Kamailio decide which protocol to use when fwding to another proxy? Hi, I have two instances of Kamailio acting as edge proxies. One on the customer side and one on the agent side. Like: customer -> proxy1 -> proxy2 -> agent. Both customer and agent are registered to proxy1/proxy2 via TLS. However when proxy1 forwards to proxy2, it is using UDP. How can I force it to use TLS? Attached is the result of nslookup on the domain: translation.sms-test.cyracom.com. Thanks Pranathi [cid:image002.jpg@01D27654.0A627200]

2 1

kamdbctl error.
by Venkatesh Macha 25 Jan '17

25 Jan '17

Hi all, I am using debian jessie, I just installed kamailio 4.4 from source and trying to create kamailio database using kamdbctl but when i try to run the kamdbctl create i am getting following charset error. /usr/local/sbin/kamdbctl create MySQL password for root: INFO: creating database kamailio ... ERROR 1115 (42000) at line 1: Unknown character set: 'ISO' Mysql Version : 5.5.52 Thank you in advance -- View this message in context: http://sip-router.1086192.n5.nabble.com/kamdbctl-error-tp155288.html Sent from the Users mailing list archive at Nabble.com.

2 5

Asterisk Proxy Multiple Devices / BLF Issues
by Ryan Wagoner 24 Jan '17

24 Jan '17

I'm following the latest Kamailio and Asterisk Realtime guide to offload registrations from my FreePBX / Asterisk setup and possibly load balance down the road. I'm running Kamailio 4.4.5 and Asterisk 11.6-cert15. I realize FreePBX isn't realtime and will work around that with a database view, etc. I was excited to see Kamailio will handle multiple devices registering to the same device/extension and placing / receiving calls works. I did run into an issue when any device unregisters Kamailio always forwards the register with expires 0 to Asterisk. To workaround this I modified the route[REGFWD] and added the if($hdr(Expires)==$null) chunk of code. I wanted to use caller->count, but ran into stale contact records with expires set to deleted. I then tried enumerating the contacts, but don't understand why ulc(caller->expires) is 10 when kamctl ul show shows expires deleted. The code below works, but I was hoping for an explanation of the expires = 10 or if there was a better way to handle this scenario. Additionally I enabled presence (WITH_PRESENCE) but Kamailio responds 489 bad event for subscribe requests from devices registered to it. I was hoping it would proxy these to Asterisk for BLF support. If somebody could point me in the right direction it would be appreciated. # Forward REGISTER to Asterisk route[REGFWD] { if(!is_method("REGISTER")) { return; } if($hdr(Expires)==$null) { reg_fetch_contacts("location", "$sel(contact.uri)", "caller"); $var(i) = 0; $var(j) = 0; while($var(i) < $(ulc(caller=>count))) { if($(ulc(caller=>expires)[$var(i)])!=10) { $var(j) = $var(j) + 1; } $var(i) = $var(i) + 1; } if($var(j)>=1) { return; } } $var(rip) = $sel(cfg_get.asterisk.bindip); $uac_req(method)="REGISTER"; $uac_req(ruri)="sip:" + $var(rip) + ":" + $sel(cfg_get.asterisk.bindport); $uac_req(furi)="sip:" + $au + "@" + $var(rip); $uac_req(turi)="sip:" + $au + "@" + $var(rip); $uac_req(hdrs)="Contact: <sip:" + $au + "@" + $sel(cfg_get.kamailio.bindip) + ":" + $sel(cfg_get.kamailio.bindport) + ">\r\n"; if($sel(contact.expires) != $null) $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $sel(contact.expires) + "\r\n"; else $uac_req(hdrs)= $uac_req(hdrs) + "Expires: " + $hdr(Expires) + "\r\n"; uac_req_send(); } Thanks, Ryan

1 0

(no subject)
by jay binks 24 Jan '17

24 Jan '17

Hi Guys, Im using a keepalived solution between 2 kamailio boxes, with net.ipv4.ip_nonlocal_bind =1 . On the "non master" I pretty much constantly get these logs in syslog. What Im looking for is a way to suppress these because they are expected in my configuration. is there any way to tell kamailio to not log this... ( or at least, not at CRIT and ERROR ) *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: tm [../../forward.h:208]: msg_send(): udp_send failed* *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: ERROR: <core> [udp_server.c:576]: udp_send(): sendto(sock,0x7fc0732d5ab0,380,0,xxx.xxx.xxx.xxx:5060,16): Invalid argument(22)* *Jun 25 10:32:53 lb2 /usr/sbin/kamailio[24869]: CRITICAL: <core> [udp_server.c:581]: udp_send(): invalid sendtoparameters#012one possible reason is the server is bound to localhost and#012attempts to send to the net* -- Sincerely Jay

4 9

How to determine correct port to set in record-route header
by Pranathi Venkatayogi 23 Jan '17

23 Jan '17

Hi, I am using Kamailio behind NAT, unable to figure how to make it put “public ip” in Record-route header, I am manually inserting the hard-coded header myself as below. However now I am having trouble choosing the right port number in all scenarios. $var(dstPort) = 5061; if (dst_port==5060) { $var(dstPort) = 5060; } insert_hf("Record-Route: <sip:MY_PUBLICIP_ADDR:$var(dstPort);transport=tls;lr;nat=yes>\r\n", "Record-Route"); In one scenario I see the conflicting port numbers in “via” header vs “Record route”. The ACK is being set to port 5060 based on Record route header and is not being received by the callee. 2017-01-23 14:52:49.970233 [blink.exe 2780]: SENDING: Packet 11, +0:00:36.411867 10.0.27.108:58217 -(SIP over TLS)-> 172.31.211.31:5061 SIP/2.0 180 Ringing Via: SIP/2.0/TLS 63.149.103.72:5061;received=172.31.211.31;branch=z9hG4bK4799.7067bd2a48063748a4c353fa408eaefa.0 Via: SIP/2.0/UDP 10.0.16.52;rport=5060;branch=z9hG4bK4799.935a27c6ef5ad112225964cbe7c1be44.0;i=2 Via: SIP/2.0/TLS 10.11.200.12:51793;rport=51793;received=10.11.200.12;branch=z9hG4bKPj49f6aeca3f9b4155ab4c5304b544aa4d;alias Record-Route: <sip:63.149.103.72:5060;transport=tls;lr;nat=yes> Record-Route: <sip:10.0.16.52:5061;transport=tls;lr;nat=yes> Call-ID: 09ce10efa6a946bf9445ccc21857393e From: "cust1" <sip:cust1@devtranslation.sms-test.cyracom.com>;tag=95082caabecc42548c2fec5ccd29e5de To: <sip:spanish@translation.sms-test.cyracom.com>;tag=ec365cc8489b48a7bc5725d21b7d97a1 CSeq: 17422 INVITE Server: Blink 3.0.0 (Windows) Contact: <sip:20745891@10.0.27.108:58216;transport=tls> Allow: SUBSCRIBE, NOTIFY, PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, MESSAGE, REFER Content-Length: 0 Questions: 1. How can I let in-built record-route function automatically choose “public ip” so I can get rid of my manual insertion altogether. 2. If no option, what is the right way to choose the port on which packet is being received, so it is same as what is on “VIA”. 3. Any other pointers to improve the logic here?

1 0

NAPTR/SRV lookups fail when use_dns_failover is enabled.
by Jeremy Gadd 23 Jan '17

23 Jan '17

Hello, everyone! I'm trying to enable dns_srv_lb but I'm stuck just before I can get there. If I don't enable use_dns_failover, lookups work and calls route but always to the first host. We need to load balance, so that doesn't work very well. If I enable use_dns_failover, the lookups stop working completely and we get a dns lookup failure like so: ERROR: tm [ut.h:296]: uri2dst2(): ERROR: uri2dst: failed to resolve " redacted.hostname.here.com" :unresolvable A or AAAA request (-7) This works: use_dns_cache=on dns_use_search_list=no dns_try_naptr=on # use_dns_failover=on This breaks it: use_dns_cache=on dns_use_search_list=no dns_try_naptr=on use_dns_failover=on I have checked to see that use_dns_failover is compiled in: version: kamailio 4.4.2 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 4.9.2

2 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users