sr-users

sr-users@lists.kamailio.org

15 participants
37466 discussions

mistakenly detected NAT in IPv6 setup
by Sebastian Damm 23 Jan '15

23 Jan '15

Hi, it looks to me that Kamailio detects NAT without NAT being there, when used in IPv6 scenarios. I have a register, which comes in like this: U 2015/01/23 11:42:31.013284 2a01:1234:123:1234::2:16732 -> 2001:9876:98:9876::aa01:5060 REGISTER sip:domain SIP/2.0 Via: SIP/2.0/UDP [2a01:1234:123:1234::2]:16732;branch=z9hG4bK45528eba After it has run through Kamailio, the packet is sent out like this: U 2015/01/23 11:42:31.015126 1.2.3.4:5060 -> 9.8.7.6:5060 REGISTER sip:domain SIP/2.0 Via: SIP/2.0/UDP 1.2.3.4;branch=z9hG4bK8d21.7fa5fb060c2acc9583f05a93b93f9873.0 Via: SIP/2.0/UDP [2a01:1234:123:1234::2]:16732;received=2A01:1234:123:1234:0:0:0:2;branch=z9hG4bK45528eba As far as I know, the received part should only get appended, if the source IP of the packet differs from the IP advertised in the topmost Via header. But to me it looks like it always gets appended. In just IPv4 scenarios, the received parameter only gets appended if a difference is detected. And if it gets appended, shouldn't the received parameter IP be in square brackets, too? Later on, we have something like this in our code: if(method=="REGISTER") { if (nat_uac_test("23")) { append_hf("X-nathint: nat\r\n"); force_rport(); if (!add_path_received()) { sl_send_reply("503", "Internal Path Error"); }; } else { if (!add_path()) { sl_send_reply("503", "Internal Path Error"); }; }; } In our code, Kamailio always jumps into the add_path_received() part, so I guess, NAT detection triggers. But why? And then the Path header appended looks like this: Path: <sip:1.2.3.4;lr;received=sip:2A01:1234:123:1234:0:0:0:2:16732> The path module probably doesn't know anything about IPv6, too, so the IP in the received parameter is not enclosed in square brackets. When using the Path header later to send packets to the client, Kamailio complains about a parse error for the destination URI again. I tried looking into the path module, but I guess my C skills aren't sufficient to submit a patch. Best regards, Sebastian

2 2

Siremis Installation Web Page NOT Displayed.
by Mahmoud Ramadan Ali 23 Jan '15

23 Jan '15

Hi Dears, I'm trying to install Siremis 4.1 on Debian and whenever i open the URL in IE i get location.href='$url'"; exit; } ?> and in Firefox i see <?php if(is_file(dirname(__FILE__).'/install.lock')){ include 'bin/_forward.php'; }else{ $script_name = $_SERVER['SCRIPT_NAME']; $url = str_replace("index.php","install/",$script_name); echo "<script>location.href='$url'</script>"; exit; } ?> I've verified the permissions of - siremis/log - siremis/session - siremis/files - siremis/themes/default/template/cpl files without success also no logs gets written to the logs file...please help to fix this issue... Thanks in advance

1 0

RFC: best way to create dialogs
by Klaus Darilion 22 Jan '15

22 Jan '15

Hi! I use the dialog module to count and limit concurrent calls per user. It worked fine with 4.1.7 but fails with 4.2.2. My config basically looks like: route{ ... dlg_manage() ... authentication (stateless replies + exit) ... t_on_reply() t_on_branch() ... t_relay() exit; } initial_cbs_inscript uses the default value 1. Using 4.1.7, after stateless reply+exit, Kamailio executes dialog callbacks and deletes the dialog: [dlg_var.c:55]: dlg_cfg_cb(): new dialog with no trasaction after config execution [dlg_hash.c:872]: dlg_unref(): unref dlg 0xb233c3a0 with 1 -> 1 [dlg_hash.c:872]: dlg_unref(): unref dlg 0xb233c3a0 with 1 -> 0 [dlg_hash.c:872]: dlg_unref(): ref <=0 for dialog 0xb233c3a0 [dlg_hash.c:355]: destroy_dlg(): destroying dialog 0xb233c3a0 (ref 0) With 4.2.2, after stateless reply+exit, Kamailio just exits without calling any dialog callback (to destroy the dialog) I think I could work around the problem by creating the transaction later. Here are some ideas and I would be happy about your comments and best practices. - set initial_cbs_inscript to 0 - call dlg_manage() just before t_relay - do not use dlg_manage() but use the dialog flag and set the flag somewhere before t_relay Finally, do t_on_reply() and t_on_branch() already create the transaction or is it created with t_relay()? Thanks Klaus

1 0

reINVITE with uac_req_send()
by Le Truong Giang 22 Jan '15

22 Jan '15

Hi ! I have the following simple scenario A <---> Kamailio <---> Asterisk <---> B now i'm trying to handle Timeout reply when B is unavailable. First i suspend transaction and wait for B available. i use uac_reg_send() to reINVITE B .The problem is when B available, it receive INVITE but A doesn't receive ACK therefore the call is incomplete I guess the reason is source IP in reINVITE is Kamailio's not A's IP, so ACK can't reach A. How can i set this source IP to A's IP ? Any idea is appreciated Thank you !

1 0

RedHat 7 packages issue
by Alberto Panizzo 22 Jan '15

22 Jan '15

Hi all, Thanks for your hard working on Kamailio! I was just trying to install kamailio 4.2.X on a RedHat 7 machine but I got checksum mismatch: I took the yum configuration from: http://rpm.kamailio.org/ [kamailio] name=RPMs for Kamailio on RHEL 7 type=rpm-md baseurl=http://rpm.kamailio.org/stable/RHEL_7/ gpgcheck=1 gpgkey=http://rpm.kamailio.org/stable/RHEL_7/repodata/repomd.xml.key enabled=1 Than started yum update $ sudo yum update Loaded plugins: amazon-id, rhui-lb kamailio | 1.2 kB 00:00:00 kamailio/primary FAILED ] 0.0 B/s | 0 B --:--:-- ETA http://rpm.kamailio.org/stable/RHEL_7/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum] 0.0 B/s | 0 B --:--:-- ETA Trying other mirror. kamailio/primary | 7.4 kB 00:00:00 http://rpm.kamailio.org/stable/RHEL_7/repodata/primary.xml.gz: [Errno -1] Metadata file does not match checksum Trying other mirror. Indeed http://rpm.kamailio.org/stable/RHEL_7/repodata/repomd.xml says: <data type="primary"> <checksum type="sha">4cc322a95d4a978e383903feaf8fbbe8ccc2ff9e</checksum> <open-checksum type="sha">9fd04e59185a8e844133b834a662cae3cc0837b7</open-checksum> <location href="repodata/primary.xml.gz"/> <timestamp>1413465311</timestamp> <size>7344</size> <open-size>70829</open-size> </data> while http://rpm.kamailio.org/stable/RHEL_7/repodata/primary.xml.gz I can download is: $ ls -l primary.xml.gz -rw-rw-r-- 1 alberto alberto 7562 gen 22 10:58 primary.xml.gz $ shasum primary.xml.gz e8e052970984feb0cdb16b98f05aefc516295aba primary.xml.gz Do I have to switch to other repository? Thank you, Best Regards -- Alberto Panizzo CTO - Co-Founder Amarula Solutions BV Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119171 F. +31(0)204106211 www.amarulasolutions.com

1 0

How to make presence module allocating an etag only for an initial Publish??
by Nuno Reis 21 Jan '15

21 Jan '15

Hello all. I've been testing presence module for a while and I do notice that presentity table grows endlessly over time. Each time a call is made a new record is added in presentity with a different etag. In documentation, namely developers guide we can read this: int etag_not_new; /* * 0 - the standard mechanism (allocating new etag for each Publish) * 1 - allocating an etag only for an initial Publish */ How can I tell the presence module in kamailio config to work using the second form of the above? Looking forward to hear from you. BR, -- *Nuno Miguel Reis* | *Unified Communication** Systems* M. +351 913907481 | nreis(a)wavecom.pt WAVECOM-Soluções Rádio, S.A. Cacia Park | Rua do Progresso, Lote 15 3800-639 AVEIRO | Portugal T. +351 309 700 225 | F. +351 234 919 191 *GPS <http://maps.google.com/maps/ms?msa=0&msid=202333747613191340808.0004b4b227a…> | www.wavecom.pt <http://www.wavecom.pt/>** <http://www.wavecom.pt/>* [image: Description: Description: WavecomSignature] <http://www.wavecom.pt/pt/wavecom/premios.php> [image: Publicity] <http://www.wavecom.pt/pt/mail_eventos.php>

2 2

Kamailio doesn't response to some INVITE packages
by Volkan Oransoy 21 Jan '15

21 Jan '15

Hi, My Kamailio box works very well for a year, in front of a Freeswitch box. Nowadays, some of my users live problems about receiving calls. But this problem occurs on a couple of specific users. %1 of users complain about it. When I capture the traffic, I see that, Kamailio receives an invite package from freeswitch but takes no action. Normally it should response with a 100 trying message. Here is the INVITE package. 1.2.3.6 is the Freeswitch box and 1.2.3.2 is the Kamailio box. I captured this package on Kamailio box. U 1.2.3.6:5060 -> 1.2.3.2:5060 INVITE sip:2000@test.example.net SIP/2.0. Via: SIP/2.0/UDP 1.2.3.6;rport;branch=z9hG4bKZU1Z76FvDZ26r. Route: <sip:1.2.3.2>;lr. Max-Forwards: 65. From: "908508850000" <sip:908508850000@test.example.net>;tag=KjcgDe0NyKN0B. To: <sip:2000@88.235.112.33:1028>. Call-ID: 72b344f4-1c09-1233-ad8d-0050568e9066. CSeq: 70585075 INVITE. Contact: <sip:mod_sofia@1.2.3.6:5060>. User-Agent: FreeSWITCH-mod_sofia/1.4.14+git~20141119T221113Z~ca1d990cfc~64bit. Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE. Supported: timer, path, replaces. Allow-Events: talk, hold, conference, presence, as-feature-event, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer. Content-Type: application/sdp. Content-Disposition: session. Content-Length: 270. X-AUTH-IP: 159.253.40.138. X-BF-SRC: 2. X-FS-Support: update_display,send_info. Remote-Party-ID: "908508850000" <sip:908508850000@test.example.net >;party=calling;screen=yes;privacy=off. . v=0. o=FreeSWITCH 1421813895 1421813896 IN IP4 1.2.3.6. s=FreeSWITCH. c=IN IP4 1.2.3.6. t=0 0. m=audio 28384 RTP/AVP 3 8 0 101 13. a=rtpmap:3 GSM/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=ptime:20. I use standart location lookup and relay procedure in Kamailio default script. Is there anything wrong with this INVITE package and how can I trace this issue on Kamailio box? Thank you. /Volkan

3 3

FW: KAMAILIO IMS Questions
by Zaka Ul Isam 21 Jan '15

21 Jan '15

Hello Folks: Hope you can see this and share your ideas as to how to fix it? Thanks and regards, Zaka ________________________________________ From: Zaka Ul Isam Sent: Wednesday, January 21, 2015 12:20 PM To: Carsten Bock Cc: miconda(a)gmail.com Subject: RE: KAMAILIO IMS Questions hello All: First of all many thanks for your kind response. In fact my last few emails did not make it to the list (and nor bounced). It seems there is an error on the receiving mail server! However, I am regularly receiving list emails and can respond to threads but due to unknown reason, can not initiate a thread! Yes, it is an install from stable version source. Inorder to bouble check, we even compiled this module from source and copied to the kamailio modules folder replacing the actual module,but without luck! Please suggest the fix. Thanks and regards, Zaka ________________________________________ From: Carsten Bock [carsten(a)ng-voice.com] Sent: Wednesday, January 21, 2015 11:56 AM To: Zaka Ul Isam Cc: miconda(a)gmail.com Subject: Re: KAMAILIO IMS Questions Hi Zaka, please forward the request to the sr-users list, as neither me or Daniel provide direct support. How did you install Kamailio? Are you sure, that you have the SIP-Trace in (/usr/local/lib64/kamailio/modules/)? >From your log, i can see, that you did not install it from the Debian-Packages.... Thanks, Carsten 2015-01-21 12:17 GMT+02:00 Zaka Ul Isam <Zaka.Ul(a)albtelecom.al>: > Hi Gentlemen: > > Yet another stumbling block! > Now it is not setting module parameters or finding module <SIPTRACE> > The module is there, I have confirmed it. Below is the error log & relevant > code snippet: > > Error LOG > > kamailio -cf /usr/local/etc/kamailio/pcscf/kamailio.cfg > loading modules under config path: /usr/local/lib64/kamailio/modules/ > 0(22035) ERROR: <core> [modparam.c:166]: set_mod_param_regex(): No module > matching <siptrace> found > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 366, column 42: Can't set > module parameter > 0(22035) ERROR: <core> [modparam.c:166]: set_mod_param_regex(): No module > matching <siptrace> found > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 368, column 35: Can't set > module parameter > 0(22035) ERROR: <core> [modparam.c:166]: set_mod_param_regex(): No module > matching <siptrace> found > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 369, column 44: Can't set > module parameter > 0(22035) ERROR: <core> [modparam.c:166]: set_mod_param_regex(): No module > matching <siptrace> found > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 370, column 37: Can't set > module parameter > 0(22035) ERROR: <core> [modparam.c:166]: set_mod_param_regex(): No module > matching <siptrace> found > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 371, column 38: Can't set > module parameter > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 372, column 1: syntax error > 0(22035) : <core> [cfg.y:3439]: yyerror_at(): parse error in config file > /usr/local/etc/kamailio/pcscf/kamailio.cfg, line 372, column 1: > ERROR: bad config file (7 errors) > 0(22035) WARNING: <core> [ppcfg.c:219]: pp_ifdef_level_check(): different > number of preprocessor directives: N(#!IF[N]DEF) - N(#!ENDIF) = 1 > [root@IMS-dta1 pcscf]# locate modparam.c > bash: locate: command not found > > Source File > > } > > regfree(&preg); > pkg_free(reg); > if (!mod_found) { > LM_ERR("No module matching <%s> found\n", regex); > return -4; > } > return 0; > } > > > Please advise! > > Kindest regards, > > Zaka > > > > ________________________________________ > From: Zaka Ul Isam > Sent: Friday, January 09, 2015 4:07 PM > To: Carsten Bock > Subject: RE: KAMAILIO IMS Questions > > > Hi Carsten: > > Thanks a lot for your quick response and elaboration. > > As regards HSS, for testbed, we plan to use FOKUS HSS, Hope it will serve > the purpose. Please note that in addition to DIALOG_NG old DIALOG Module was > also required! > > > Thanks again & regards, > > Zaka > > ________________________________________ > From: Carsten Bock [carsten(a)ng-voice.com] > Sent: Friday, January 09, 2015 3:05 PM > To: Zaka Ul Isam > Subject: Re: KAMAILIO IMS Questions > > Hi Zaka, > > Thanks :-) > > You questions: > 1) you should be able to start the three components with "kamailio -f > /path/to/kamailio.cfg". > > You may need to modify the following line: > # ------------------ module loading ---------------------------------- > mpath="/usr/lib64/kamailio/modules_k/:/usr/lib64/kamailio/modules/:/usr/lib/kamailio/modules_k/:/usr/lib/kamailio/modules/" > > This defines, where Kamailio will find it's modules. After the > source-code install, this is probably not correct :-) > > 2) The PCRF (and the pcscf.xml-Configuration) is optional (this > functionality has to be enabled by enabling "WITH_RX" in the > configuration, otherwise the pcscf.xml is ignored) > > 3) I assume, you also installed FHoSS from source instead from the > Package? In any case, you need to edit the hibernate.properties (e.g. > /opt/FHoSS/deploy/hibernate.properties). > > Regarding the errors of the Webinterface: It doesn't matter, if it's > 32 or 64 bit. FHoSS and it's Webinterface are for showcase and > scientific work only, so i assume, that's fine (as long as it works). > In production environments, we use e.g. a Nokia Siemens HSS (if > already present, e.g. for the LTE access) or our own drop in > replacement (with a totally different interface). > > Kind regards, > Carsten > > 2015-01-08 15:27 GMT+01:00 Zaka Ul Isam <Zaka.Ul(a)albtelecom.al>: >> Hi, Carsten: >> >> Thanks for the informative posts and responses on IMS related topics. I >> was >> trying to configure based on your last post at: >> >> http://www.kamailio.org/wiki/tutorials/ims/installation-howto >> >> With respect to above, I have few questions: >> >> 1: If the Kamailio based IMS, compiled from source (not package manager >> install) and all components in one machine. How do we start different >> components? >> >> kamailio -f /PATH/TO/RESPECTIVE COMPONENTS EXECUTABLE (kamailio.cfg with >> an >> include file P/I/S-CSCF.CFG) >> >> 2: In case of P-CSCF there are three config files as well (.xml for >> Diameter >> interface). The latter has reference to PCRF PEER >> Is it must? as there is no corresponding DNS entry in >> Kamailio-IMS.DNSZONE file. >> 3: As regards FOKUS HSS, in order to adapt the config to our scenario, do >> we >> also need to edit FHOSS/hibernate.properties file? Besides, we have errors >> with HSS WEB interface on 64 bit machines. Is 32 bit architecture the >> recommended one for HSS? >> >> Thanking you in anticipation, >> >> Zaka >> >> >> >> >> ________________________________ >> >> Albtelecom & Eagle Mobile invite you to protect together the Environment. >> Please do not print the e-mail unless really necessary. >> >> Albtelecom & Eagle Mobile iu ftojnë të mbrojmë së bashku Mjedisin. Lutemi >> të >> mos e printoni këtë komunikim elektronik nëse nuk është vërtet i >> nevojshëm. >> >> ________________________________ >> >> This e-mail and any files transmitted with it are confidential and >> intended >> solely for the use of the addressee/s. If you are not the intended >> recipient >> you are hereby notified that any dissemination, forwarding, copying or use >> of any of the information is strictly prohibited. If you receive this >> e-mail >> in error, please notify the sender immediately and delete it! Albtelecom >> makes no warranty as to the accuracy or completeness of any information >> contained in this message and hereby excludes any liability of any kind >> for >> the information contained therein or for the information transmission, >> reception, storage or use of such in any way whatsoever. The opinions >> expressed in this message may belong to sender alone and may not >> necessarily >> reflect the opinions of Albtelecom. Albtelecom shall bear no liability for >> any loss or damage caused by software or e-mail viruses. >> >> Ky mesazh dhe çdo informacion i transmetuar në përmbajtje te këtij mesazhi >> është konfidencial dhe është i destinuar vetëm për marrësin e destinuar. >> Nëse nuk jeni marrësi i destinuar, Ju bëjmë me dije se çdo përhapje, >> transmetim, kopjim apo përdorim i çdo informacioni është i ndaluar. Nëse e >> merrni këtë mesazh gabimisht, ju lutem kontaktoni urgjentisht nisësin e >> tij >> dhe fshijeni atë. Albtelecom nuk jep asnjë garanci për saktësinë apo >> plotësinë e informacionit në përmbajtje të këtij mesazhi dhe nuk mban >> asnjë >> përgjegjësi për informacionin e përmbajtur, transmetimin, marrjen, >> ruajtjen >> apo përdorimin e tij në çfarëdolloj mënyre. Mendimet e shprehura në këtë >> mesazh mund t'i përkasin vetë nisësit dhe nuk mund të reflektojnë >> domosdoshmërisht qëndrimet e Albtelecom. Albtelecom nuk do të mbaje asnjë >> përgjegjësi për humbje ose dëme te shkaktuara nga programet apo viruset. > > > > -- > Carsten Bock > CEO (Geschäftsführer) > > ng-voice GmbH > Schomburgstr. 80 > D-22767 Hamburg / Germany > > http://www.ng-voice.com > mailto:carsten@ng-voice.com > > Office +49 40 5247593-0 > Fax +49 40 5247593-99 > > Sitz der Gesellschaft: Hamburg > Registergericht: Amtsgericht Hamburg, HRB 120189 > Geschäftsführer: Carsten Bock > Ust-ID: DE279344284 > > Hier finden Sie unsere handelsrechtlichen Pflichtangaben: > http://www.ng-voice.com/imprint/ > > ________________________________ > > This e-mail and any files transmitted with it are confidential and intended > solely for the use of the addressee/s. If you are not the intended recipient > you are hereby notified that any dissemination, forwarding, copying or use > of any of the information is strictly prohibited. If you receive this e-mail > in error, please notify the sender immediately and delete it! Albtelecom > makes no warranty as to the accuracy or completeness of any information > contained in this message and hereby excludes any liability of any kind for > the information contained therein or for the information transmission, > reception, storage or use of such in any way whatsoever. The opinions > expressed in this message may belong to sender alone and may not necessarily > reflect the opinions of Albtelecom. Albtelecom shall bear no liability for > any loss or damage caused by software or e-mail viruses. > > Ky mesazh dhe çdo informacion i transmetuar në përmbajtje te këtij mesazhi > është konfidencial dhe është i destinuar vetëm për marrësin e destinuar. > Nëse nuk jeni marrësi i destinuar, Ju bëjmë me dije se çdo përhapje, > transmetim, kopjim apo përdorim i çdo informacioni është i ndaluar. Nëse e > merrni këtë mesazh gabimisht, ju lutem kontaktoni urgjentisht nisësin e tij > dhe fshijeni atë. Albtelecom nuk jep asnjë garanci për saktësinë apo > plotësinë e informacionit në përmbajtje të këtij mesazhi dhe nuk mban asnjë > përgjegjësi për informacionin e përmbajtur, transmetimin, marrjen, ruajtjen > apo përdorimin e tij në çfarëdolloj mënyre. Mendimet e shprehura në këtë > mesazh mund t'i përkasin vetë nisësit dhe nuk mund të reflektojnë > domosdoshmërisht qëndrimet e Albtelecom. Albtelecom nuk do të mbaje asnjë > përgjegjësi për humbje ose dëme te shkaktuara nga programet apo viruset. -- Carsten Bock CEO (Geschäftsführer) ng-voice GmbH Schomburgstr. 80 D-22767 Hamburg / Germany http://www.ng-voice.com mailto:carsten@ng-voice.com Office +49 40 5247593-0 Fax +49 40 5247593-99 Sitz der Gesellschaft: Hamburg Registergericht: Amtsgericht Hamburg, HRB 120189 Geschäftsführer: Carsten Bock Ust-ID: DE279344284 Hier finden Sie unsere handelsrechtlichen Pflichtangaben: http://www.ng-voice.com/imprint/ ________________________________ This e-mail and any files transmitted with it are confidential and intended solely for the use of the addressee/s. If you are not the intended recipient you are hereby notified that any dissemination, forwarding, copying or use of any of the information is strictly prohibited. If you receive this e-mail in error, please notify the sender immediately and delete it! Albtelecom makes no warranty as to the accuracy or completeness of any information contained in this message and hereby excludes any liability of any kind for the information contained therein or for the information transmission, reception, storage or use of such in any way whatsoever. The opinions expressed in this message may belong to sender alone and may not necessarily reflect the opinions of Albtelecom. Albtelecom shall bear no liability for any loss or damage caused by software or e-mail viruses. Ky mesazh dhe çdo informacion i transmetuar në përmbajtje te këtij mesazhi është konfidencial dhe është i destinuar vetëm për marrësin e destinuar. Nëse nuk jeni marrësi i destinuar, Ju bëjmë me dije se çdo përhapje, transmetim, kopjim apo përdorim i çdo informacioni është i ndaluar. Nëse e merrni këtë mesazh gabimisht, ju lutem kontaktoni urgjentisht nisësin e tij dhe fshijeni atë. Albtelecom nuk jep asnjë garanci për saktësinë apo plotësinë e informacionit në përmbajtje të këtij mesazhi dhe nuk mban asnjë përgjegjësi për informacionin e përmbajtur, transmetimin, marrjen, ruajtjen apo përdorimin e tij në çfarëdolloj mënyre. Mendimet e shprehura në këtë mesazh mund t'i përkasin vetë nisësit dhe nuk mund të reflektojnë domosdoshmërisht qëndrimet e Albtelecom. Albtelecom nuk do të mbaje asnjë përgjegjësi për humbje ose dëme te shkaktuara nga programet apo viruset.

1 0

Kamailio doesn't response to some INVITE packages
by Volkan Oransoy 21 Jan '15

21 Jan '15

My Kamailio box works very well for a year, in front of a Freeswitch box. Nowadays, some of my users live problems about receiving calls. But this problem occurs on a couple of specific users. %1 of users complain about it. When I capture the traffic, I see that, Kamailio receives an invite package from freeswitch but takes no action. Normally it should response with a 100 trying message. Here is the INVITE package. 1.2.3.6 is the Freeswitch box and 1.2.3.2 is the Kamailio box. I captured this package on Kamailio box. U 1.2.3.6:5060 -> 1.2.3.2:5060 INVITE sip:2000@test.example.net SIP/2.0. Via: SIP/2.0/UDP 1.2.3.6;rport;branch=z9hG4bKZU1Z76FvDZ26r. Route: <sip:1.2.3.2>;lr. Max-Forwards: 65. From: "908508850000" <sip:908508850000@test.example.net>;tag=KjcgDe0NyKN0B. To: <sip:2000@88.235.112.33:1028>. Call-ID: 72b344f4-1c09-1233-ad8d-0050568e9066. CSeq: 70585075 INVITE. Contact: <sip:mod_sofia@1.2.3.6:5060>. User-Agent: FreeSWITCH-mod_sofia/1.4.14+git~20141119T221113Z~ca1d990cfc~64bit. Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE. Supported: timer, path, replaces. Allow-Events: talk, hold, conference, presence, as-feature-event, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer. Content-Type: application/sdp. Content-Disposition: session. Content-Length: 270. X-AUTH-IP: 159.253.40.138. X-BF-SRC: 2. X-FS-Support: update_display,send_info. Remote-Party-ID: "908508850000" <sip:908508850000@test.example.net >;party=calling;screen=yes;privacy=off. . v=0. o=FreeSWITCH 1421813895 1421813896 IN IP4 1.2.3.6. s=FreeSWITCH. c=IN IP4 1.2.3.6. t=0 0. m=audio 28384 RTP/AVP 3 8 0 101 13. a=rtpmap:3 GSM/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=ptime:20. I use standart location lookup and relay procedure in Kamailio default script. Is there anything wrong with this INVITE package and how can I trace this issue on Kamailio box? Thank you.

1 0

Removing unwanted characters from From-header
by Sebastian Thörn 21 Jan '15

21 Jan '15

Hi, Hello! I'm having trouble with matching massages for some Patton equipment, from the looks of it, Patton don't like </> in headers. The initial INVITE from Patton is sent without </> in To and From-headers. In the logs from Patton I can see that it matches the "100 trying" that Kamailio sends back to it, and this message has To and From-headers without </>, but the "180 Ringing" and "200 OK" that Kamailio sends is not matched, and these two has </>. I would like to remove < and > in my onreply_route, how can I do this? Or does anyone have experience on how Patton matches messages? Br Sebastian Thörn

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users