sr-users

sr-users@lists.kamailio.org

5 participants
37565 discussions

kamailio for newbies!
by Aria Mill 13 Dec '14

13 Dec '14

Hello, Kamailio is difficult. Many of us want to use it because is open source and it's flexible. but to tell you the truth after 3-4 hours of playing with it I am frustrated, and I am starting to hate it! Why has nobody made a kamailio video series on youtube?-example of how to install kamailio-example of how to admistrer kamailio, and what other programs you need to work with;-example how to create users in Kamailio for enterprise use.-example of running kamailio outside enterprise like a SBC with a public ip;-example of how can you run kamailio as a load balance server.-example how to save money on your sip infrastructure using kamailio instead of cisco cube for example or sonus..or any other example you might thing is useful in a sip environment! I look at youtube and I see Kamailio this and kamailio that, but no actual tutorial! This is 2014, people don’t waste time reading documentation, youtube is much more efficient...I think Kamailio will not have the success of it's potential until senior community members will not take the plunge and broadcast their knowledge on a proper video channel! Asterisk has every scenario up there based on these info I was able to setup in less that 3 days my office and 40 people are making calls......It's unbelievable that after so many years nobody has made a godam explicit tutorial for newbies in kamailio...I am so frustrated right now!!

8 12

Create and control a new dialog to different server during main dialog
by Konstantin M. 12 Dec '14

12 Dec '14

Hello, I want to achieve the following schema: 1. Accept an initial invite 2. Create separate dialog to different SIP server (probably with some headers from point 1) 3. Wait until that different SIP server will complete dialog. 4. Based on result of point 3, transfer invite from 1 to the next steps or decline a call. The problem I've experienced - how to create a separate dialog and control it inside main dialog? Thanks a lot!

2 2

Planning to switch committing to github
by Daniel-Constantin Mierla 11 Dec '14

11 Dec '14

Hello, I setup the mirror of Kamailio github repository to kamailio.org, can be seen online at: - http://git.kamailio.org/gitlist/index.php/kamailio/ Mirroring is triggered by a push to github, so it is pretty much in real time. Right now the commit and mirroring flow is: - commit to git.sip-router.org triggers mirroring (push) to github, which triggers a mirroring (fetch) on git.kamailio.org Practically with a commit pushed directly to github, the first part of the above is skipped. All seems to be ok, my last commits were done to test the mirroring including the notification emails - I will send a separate message about what we can get there. The missing parts are the deployment of gitweb in order to have the links from archived email notifications still valid and pointing git.sip-router.org to kamailio mirror server. Considering all above, I propose to stop committing to git.sip-router.org and pushing to github starting either next Monday (Dec 15) (or Wednesday (Dec 17) if not ready by Monday). Existing developers have to send me the github username to add it to kamailio project. Any suggestions and comments are welcome! Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda

3 4

Charging System
by Abdul Gafar 11 Dec '14

11 Dec '14

Hi all I'm trying install IMS charging module,is this posible use kamailio server, without install other module IMS ? //Gafar

2 2

Appending/removing a value associated with domain
by Olli Heiskanen 11 Dec '14

11 Dec '14

Hello, Something I've been wondering about meddling with sip uris with Kamailio: I know it's possible to translate between a number prefix and a domain using PDT, but is this possible: Having a numeric or alphanumeric value stored in db, associated to a domain and appended to / removed from a number during processing a sip message? For example 112222333(a)mydomain.com --> 333.5555(a)mydomain.com where value 5555 and mydomain.com are associated to one another in db somewhere. In this example I could have a pdt with prefix 112222 and domain mydomain.com, but the value 5555 should be stored somewhere as well. So one part is to find a db table suitable for storing a value and associating it with a domain, and the other part is to change the sip uris. I'll appreciate any comments! cheers, Olli

1 0

Federation Kamailio
by nadie 11 Dec '14

11 Dec '14

Hello. I installed kamailio. All OK. But when i call to other servers. ostel.co. for example. no ring. What element permits federation between kamailios? DNS Records? Thank you.

3 3

Kamailio - change SIP type
by Leky Shakur 11 Dec '14

11 Dec '14

Hello, Is is possible to change SIP message type? Example: Server A sends Kamailio SIP INVITE message, can I change this SIP INVITE to "302 - MOVED" (and reuse data from SIP INVITE) and send it to Server B? Does anybody have any example? Best Regards.

1 0

Kamailio Truncating timestamp of sip message?
by Heenan, Timothy Steven 10 Dec '14

10 Dec '14

Greetings, I've recently run into a rather strange issue where, in response to an INVITE sent by Kamailio, I'm receiving a 183 Session Progress and SIP 200 OK response about .000050 seconds apart (.05 miliseconds) . Kamailio is choosing to forward the SIP 200 OK ahead of the 183, as if they had arrived at the same time and is prioritizing the 200. Is there a truncate limit on timestamp values? Is this possibly adjustable? Thank you in advance, -Tim ---------------------------------------------------------------------- This email message and any attachments are for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message and any attachments.

2 1

RFC: infrastructure upgrade - git, tracker, ...
by Daniel-Constantin Mierla 10 Dec '14

10 Dec '14

Hello, as most of you know, we have a rather distributed infrastructure, with servers provided from different companies or persons. We came to the time when one of the servers is too old and considered to be decommisioned, so we have to decide how to move on. It is about sip-router.org, who was offered/sponsored by courtesy of Jan Janak. From project point of view, the server hosts: - git repository - bug tracker - website and wiki under domain sip-router.org Given that no matter what we like, there is work to do, I am looking to see what are the best options out there for everyone involved in the project. The sip-router.or wbesite and wiki, which are not really updated anyhow, will be relocated as virtual host in kamailio.org server and made static for historic purposes. For git and tracker, I thought of two variants: 1) move to use an external hosting service - the first candidate and perhaps the only to be considered is GitHub, we have there already a real time mirror of git repository. Then we should get a read only mirror to kamailio.org. If the tracker on github is good enough for everyone, then we will use it. I could see quickly that lot of kamailio developers already have an account on github. 2) get a new server and relocate those components there. It will need to be configured from scratch and the components eventually updated to use latest versions. In case of tracker, we have eventually to re-evaluate if flyspray worth keeping, as we had several discussions, due to the fact that the project doesn't seem to be very active. My personal preference at this moment is 1), given that offloads administration works from project. For 2) we will need someone to commit to a sysadmin job for long time. As probably you noticed lately, serious security vulnerabilities can appear and someone needs to take care of proper maintenance of the server. I don't want to get all services on kamailio.org, as it has other critical components (mailing lists, releases, website, ...) and messing it or overloading doesn't make sense. There is no real pressure to come to a decision, we can still rely on the server for a while, but I would rather not postpone it for long. While users are encouraged to give their opinion, I feel that existing developers should have the main role in decision, being something that impacts them directly. Your preference? Any other opinions? Cheers, Daniel -- Daniel-Constantin Mierla http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Nov 24-27, Berlin - http://www.asipto.com

8 12

Kamailio Crash when modifying username of Request Uri
by Timo Klecker 10 Dec '14

10 Dec '14

Hi all! Our Kamailio (3.1.4) crashed when modifying the username-Part of a Request URI using: $rU = $(rU{s.strip,6}); Initial Request URI: /sbin/kamailio[40658]: NOTICE: <script>: [ INVITE ] Got new Packet to sip:123456:pass@sip.custom.com The config-script now removed the first 6 chars from the username part and would replace them in one of the following lines, but Kamailio had problems here: /sbin/kamailio[40658]: ERROR: pv [pv_core.c:251]: failed to parse the R-URI /sbin/kamailio[40658]: NOTICE: <script>: Strip from Head: Request Username: <null> // $rU /sbin/kamailio[40658]: ERROR: pv [pv_core.c:251]: failed to parse the R-URI /sbin/kamailio[40658]: ERROR: <core> [action.c:801]: ERROR: do_action: bad uri <sip::passsip.custom.com>, dropping packet Is there maybe a error when modifying a uri with password this way? Do we have to change this? Ultimately Kamailio crashed: /sbin/kamailio[40658]: ERROR: <core> [action.c:1513]: run action error at: :0 /sbin/kamailio[40658]: ERROR: pv [pv_core.c:1761]: do action failed /sbin/kamailio[40658]: ERROR: <core> [lvalue.c:358]: setting pvar failed /sbin/kamailio[40658]: ERROR: <core> [lvalue.c:411]: assignment failed at pos: (319,10-319,34) /sbin/kamailio[40658]: ERROR: pv [pv_core.c:251]: failed to parse the R-URI Like 5000 lines more of /sbin/kamailio[40658]: ERROR: pv [pv_core.c:251]: failed to parse the R-URI Due to rerouting internal and trying to remove more parts of the request Uri using $rU = $(rU{s.strip,6}); Which then concluded to the following: /sbin/kamailio[40656]: ALERT: <core> [main.c:741]: child process 40660 exited by a signal 11 /sbin/kamailio[40656]: ALERT: <core> [main.c:744]: core was generated /sbin/kamailio[40656]: INFO: <core> [main.c:756]: INFO: terminating due to SIGCHLD /sbin/kamailio[40659]: ERROR: pv [pv_core.c:251]: failed to parse the R-URI /sbin/kamailio[40682]: INFO: <core> [main.c:807]: INFO: signal 15 received /sbin/kamailio[40677]: INFO: <core> [main.c:807]: INFO: signal 15 received /sbin/kamailio[40676]: INFO: <core> [main.c:807]: INFO: signal 15 received /sbin/kamailio[40678]: INFO: <core> [main.c:807]: INFO: signal 15 received [...] I will try to recreate this using the new version (4.1.6) on monday. Kind regards Timo Klecker

3 23

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users