- sr-users - kamailio.org

[OpenSER-Users] configuring share memory for Openser
by mark morreny 21 Jul '08

21 Jul '08

Hi, I am working on performance test on Openser, and I am getting: ERROR:tm:sip_msg_cloner: no more share memory ERROR:tm:store_reply: failed to alloc' clone memory The share memory allocated is 512M but the error still occurs when concurrent call reached > 100. Is this normal? Is there any benchmarking number that can help to determine the amound of shared memory needed by Openser? Thanks, Mark

2 1

[OpenSER-Users] SIP response code in case of UAS internet down
by Chahn Kim 21 Jul '08

21 Jul '08

Hi, all We are implementing a failure route upon t_relay() to UASs. This failure route is intended to a Caller who's destination UAS is not responding at all, till the request gets timed out, which can be arguably interpreted as UAS' internet is down. The purpose is to re-route incoming calls to any alternatives; i.e. cell pnone or other landline # when the remote user site lost netwrok connectivity. For the scenario above, t_check_status("408") would be the best for determining? Any other better methods or test functions in Openser? Greatly appreciate experienced' guidance. Thanks in advance. John Chahn Kim

2 1

[OpenSER-Users] SRTP and Media proxy
by Peter P GMX 20 Jul '08

20 Jul '08

Just a short question: I want to use OpenSER + mediaproxy with TLS/SRTP. Is mediaproxy able to handle the srtp stream? Best regards Peter

4 6

[OpenSER-Users] Mediaproxy 2.0 Installation
by john brown 20 Jul '08

20 Jul '08

Hello, I'm trying to test Mediaproxy 2.0 however the documentation seems vague in the following - Can I test this on Debian Etch kernel version 2.6.18 ? - The documentation says it cannot be used in combination with any version of OpenSER older than 1.4. The current stable version of OpenSER available is 1.3.2. do I have to run Mediaproxy 2.0 on an unstable version of OpenSER ? - Also it reads on the documentation: To display the history of the media streams CDRTool 6.5 or higher is required but only 6.4.1 is available on the download site. - What is the procedure to install Mediaproxy 2.0 once you download it ? I'm not familiar with Python and the documentation mainly talks about the requiremnts but there is no explanation on how to install it. I copied config.ini.sample to config.ini and edited config.ini, copied debian/mediaproxy-dispatcher.init to /etc/init.d/mediaproxy-dispatcher. Then I tried running media-dispatcher but I got the following error: host.locahosts# /etc/init.d/mediaproxy-dispatcher start Starting MediaProxy dispatcher: media-dispatcherTraceback (most recent call last): File "/usr/bin/media-dispatcher", line 12, in ? from application.process import process, ProcessError ImportError: No module named application.process already running. Thanks John

1 0

Re: [OpenSER-Users] openser and asterisk in the same pc
by Ricky Gutierrez 20 Jul '08

20 Jul '08

hi , thank you for the answer Daniel, but I am a little confused if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (has_totag()) { if (loose_route()) { if(method=="INVITE" && (!allow_trusted())) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; } else if (!check_from()) { sl_send_reply("403", "Forbidden, use From=ID"); exit; }; ### section for asterisk #### route[4] { rewritehostport("192.168.10.1:5070"); t_relay(); route(1); } route[10] { append_hf("P-hint: inbound->inbound \r\n"); if (uri=~"^sip:[29][0-9]{7}@") { if (is_user_in("credentials","local")) { route(4); exit; } else { sl_send_reply("403", "Not permissions local call"); exit; }; }; if (uri=~"^sip:1[2-9][1-9]{3}@") { if (is_user_in("credentials","int")) { route(4); exit; } else { sl_send_reply("403", "Not permissions internal call"); exit; }; }; if (uri=~"^sip:011[0-9]*@") { if (is_user_in("credentials","international")) { route(4); exit; ettc etc , inside the sip.conf [openser] type=friend context=netsoluciones insecure=very host=localhost disallow=all allow=alaw allow=g729 ;( which the best form is to authenticate the invites or not? if asterisk and openser are in the same box where my error can be ? regards rickygm ----- Original Message ---- From: Daniel-Constantin Mierla <miconda(a)gmail.com> Sent: Friday, July 18, 2008 8:16:31 AM Subject: Re: [OpenSER-Users] openser and asterisk in the same pc Hello, >the authentication is required by openser -- that means there is a >mistake in your configuration file if you don't want to authenticate >such INVITE. The phone should respond with a new INVITE having >credentials header -- you have to set the username and password in you >phone as well.

1 0

[OpenSER-Users] Aliases for outgoing calls
by mayamatakeshi 19 Jul '08

19 Jul '08

Hello, I'd like to permit our subscribers to have several aliases for outgoing calls (basically, several number in the PSTN). I think they could set this in the header From of the INVITE to us and we would identify them, authenticate them and finally relay that same alias (and not the subscriber name) to the GW (currently we permit them to have a single alias for outgoing using a field in the subscriber table). I can see the module alias_db can be used to manage aliases, but I understand it can only be used for incoming calls as it provides just a single function alias_db_lookup that operates on the Request-URI. Any ideas? regards, takeshi

4 5

[OpenSER-Users] avp_pushto
by Pablo Saro 18 Jul '08

18 Jul '08

Hi everyone, I have a doubt about the function avp_pushto(). When I do the following: ... avp_pushto("$ru", "$avp(s:devices)/g"); ... If $ru is an array with more than 1 position, avp_pushto works fine, but if both $ru and $avp(s:devices) have only 1 position, the function avp_pushto replace $ru with the new value. It cause loosing of the previous $ru. I believe that avp_pushto function shouldn't replace a value. Any idea? I'm using OpenSER 1.3.2 Thanks in advance. Pablo Saro psaro at google dot com

2 2

[Serusers] Forwarding calls to a ShoreTel System
by Freese, Bill 18 Jul '08

18 Jul '08

I will apologize in advance if this is the wrong forum or if this is an embarrassing newbie question. I am currently using an Trixbox/Asterisk system to connect a Rolm PBX to a ShoreTel phone system via SIP. The asterisk box doesn't correctly support the REFER method, so I'm hoping to use SER to proxy my SIP connections to allow the Rolm users to function correctly with transfers and conferencing. I have installed and configured my SER system using the getting started documentation. I have successfully interconnected my SER system with my Asterisk and with a Cisco 2801 and can place and route calls as I would expect. When I try to place a call through SER to my ShoreTel system, I get the standard "SIP/2.0 404 Not Found". If I compare captures of my successful SIP connection from my Asterisk environment to a capture of the SER attempt, the only real difference I see is that the INVITE TO: field has the IP of my SER system instead of the ShoreTel system. The actual INVITE uri is identifying the ShoreTel device, but the TO field has the SER address. The Asterisk connection has the address of the ShoreTel device in both places. I have tried to look through the docs and searched online, but I did not find any resources on this question. I would appreciate any feedback that could point me in the right direction. Here is a ser -V from my SER system version: ser 0.9.7-pre1 (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 @(#) $Id: main.c,v 1.197.2.1 2005/07/25 16:56:24 andrei Exp $ main.c compiled on 14:05:21 Jul 16 2008 with gcc 4.1.2 I route my calls to the ShoreTel system through the basic PSTN route from the getting started sample: route[5] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehost("my.IP.addr.here"); # INSERT YOUR PSTN GATEWAY IP ADDRESS avp_write("i:45", "inv_timeout"); t_on_failure("1"); route(1); } Thank you for any feedback in advance.

1 0

[OpenSER-Users] proxydispatcher execution time
by Ariadne Ramos 18 Jul '08

18 Jul '08

Hello I have installed openser 1.2.3 and mediaproxy 1.9.0 on my server. Im having problems with mediaproxy dispatcher time response. Is taking too much time to answer. I have the following message in the logs proxydispatcher[9601]: execution time: 2183.73 ms Could you please help me on this issue? Thanks in advanced Ariadne L. Ramos Solís Depto. Ingeniería Aprovisionamiento y Señalización VoIP Galaxy Communications Corp. Tel. 2000117 e-mail aramos(a)clarocom.com

1 0

[OpenSER-Users] openser and asterisk in the same pc
by Ricky Gutierrez 18 Jul '08

18 Jul '08

hi list , I am trying to connect openser with asterisk, but when I make calls to the pstn, it shows me a 407 Proxy Authentication Required , am trying to make groups of calls with openser that some extensions have permission of making calls to the pstn, others that alone they call internally and international. I have created 3 groups local, int, international, the extensions that are of the local group have permission I believe me, according to the theory to be able to make local calls,for this I am using asterisk, but this he throws me the message 407. The extension 112 with the address ip 192.168.10.26 belongs to the local group, and he makes an intent of calling to the pstn through asterisk, but this he throws me the message 407 I don't know because thank you for your help +0.399494 192.168.10.26:5060 -> 192.168.10.1:5060 INVITE sip:2642006@192.168.10.1;user=phone SIP/2.0 Via: SIP/2.0/UDP 192.168.10.26:5060;branch=z9hG4bKb7bfb742a0e47ab4 From: "Ventas" <sip:112@192.168.10.1;user=phone>;tag=ca46913c384c257c To: <sip:2642006@192.168.10.1;user=phone> Contact: <sip:112@192.168.10.26:5060;transport=udp;user=phone> Supported: replaces, timer, path Call-ID: fb973f9069a09ad7(a)192.168.10.26 CSeq: 59632 INVITE User-Agent: Grandstream GXP2000 1.1.5.15 Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE,PRACK,MESSAGE Content-Type: application/sdp Content-Length: 382 v=0 o=112 8000 8000 IN IP4 192.168.10.26 s=SIP Call c=IN IP4 192.168.10.26 t=0 0 m=audio 5004 RTP/AVP 0 18 3 2 99 9 4 101 a=sendrecv a=rtpmap:0 PCMU/8000 a=rtpmap:18 G729/8000 a=rtpmap:3 GSM/8000 a=rtpmap:2 G726-32/8000 a=rtpmap:99 iLBC/8000 a=fmtp:99 mode=20 a=rtpmap:9 G722/16000 a=rtpmap:4 G723/8000 a=ptime:20 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-11 # U +0.000205 192.168.10.1:5060 -> 192.168.10.26:5060 SIP/2.0 407 Proxy Authentication Required Via: SIP/2.0/UDP 192.168.10.26:5060;branch=z9hG4bKb7bfb742a0e47ab4 From: "Ventas" <sip:112@192.168.10.1;user=phone>;tag=ca46913c384c257c To: <sip:2642006@192.168.10.1;user=phone>;tag=d7e793d797690be5ce5420203095040f.2cd4 Call-ID: fb973f9069a09ad7(a)192.168.10.26 CSeq: 59632 INVITE Proxy-Authenticate: Digest realm="192.168.10.1", nonce="48802341954eb0c26cd5eb2dd85f375325fb4a7d", qop="auth" Server: OpenSER (1.3.2-notls (i386/linux)) Content-Length: 0

2 1

[OpenSER-Users] How does Operser parse source port from request?
by KevinKinnan 18 Jul '08

18 Jul '08

I wonder that how openser parse the source port from the request. Does the parser function get the port from the header of packet(TCP/UDP) or from the content(by parsing Via header or something) of request message. Regards, Kevin _________________________________________________________________ 这里好多好玩的视频，用鼠标点到视频看看，有惊喜！ http://cnweb.search.live.com/video/results.aspx?q=%E5%A5%A5%E8%BF%90%E5%9C%…

2 1

Re: [OpenSER-Users] Problem getting redirect reason in uac_redirect
by Ruchir 18 Jul '08

18 Jul '08

But after forward, new invite will be generated so avp will be lost, isn't it? On Fri, Jul 18, 2008 at 7:00 PM, kokoska rokoska <kokoska.rokoska(a)post.cz> wrote: > > > > Ruchir napsal(a): > >> This is for explicit call forwarding. I'm testing call forwarding from >> linksys pap2 call forward features which generates "302 moved temporarily" >> message. >> >> > I too :-) > May be I don't understand what you are looking for... > > From my point of view it is simple: > 1. If IS present Diversion header in 302 reply, than push it to avp > 2. If Diversion header IS NOT present, than use "unknow" reason - like in > SS7... > > Best regards, > > kokoska.rokoska > > > On Fri, Jul 18, 2008 at 6:20 PM, kokoska rokoska <kokoska.rokoska(a)post.cz<mailto: >> kokoska.rokoska(a)post.cz>> wrote: >> >> >> >> >> Ruchir napsal(a): >> > I'm using uac_redirect module to handle redirect and accounting from >> > openser. Redirect works fine so as cdr but I'm not getting how to >> write >> > redirect reason in cdr. I didn't find any way to find and store >> redirect >> > reason(call forward, busy, no answer) in CDR. Does anyone know >> how to do it? >> > >> > >> >> >> I'm using something like this (shortened): >> >> in config: >> >> modparam("acc", >> "multi_leg_info", "src_leg=$avp(i:901);dst_leg=$avp(i:902)") >> >> >> in routing script: >> >> $avp(s:acc_state) = "cfu"; >> avp_printf("$avp(i:901)", "$avp(s:caller_uuid)|$avp(s:acc_state)"); >> >> >> Works very well :-) >> >> Hope this helps, best regards, >> >> kokoska.rokoska >> >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.openser.org <mailto:Users@lists.openser.org> >> http://lists.openser.org/cgi-bin/mailman/listinfo/users >> >> >> >

1 0

[OpenSER-Users] Regarding Wathcer Application
by sureshkumar.jaiswal 18 Jul '08

18 Jul '08

i'm want to implement watcher application in openser .. but did find any idea and what fuctionality wathcer have. can any one help me regarding how i got help regarding this. ~suresh

2 2

[OpenSER-Users] openser + mysql clusters
by Sajith T S 18 Jul '08

18 Jul '08

Hi! How is the overall experience like re. deploying openser with mysql clusters? Are there gotchas etc that need to be taken care of? (For example, a 2006 article [1] says that "The MySQL NDB engine currently runs its database completely in memory. This means that you have to be able to fit your database in memory." But this is not documented as a limitation in mysql faq.) Non clustered experiments were occasionally catastrophic, so can't risk taking that route again. Somebody suggested using drbd [2], but I did not quite like it -- it needs kernel modules, has more administrative overhead, is tied to linux, it is not clear how consistency (ie, state of in-memory data and on-disk data) is taken care of, and in any case ndbcluster appears to be the clustering solution with official stamp of approval. (Related - is postgres any better? Apparently postgres' clustering capabilities are "better", but then cdrtool etc seems to be written with mysql as the primary target.) Thanks, Sajith. [1] http://www.oreillynet.com/pub/a/databases/2006/02/16/ha_mysql_cluster.html [2] http://www.drbd.org/ -- "the lyf so short, the craft so long to lerne." -- Chaucer.

3 3

[OpenSER-Users] How to do =~ case insensitive?
by Iñaki Baz Castillo 18 Jul '08

18 Jul '08

Hi, I want to do a case insensitive match, for example for Privacy header that can contain "id", "ID", "Id"... and other values. I need something as: if ($hdr(Privacy)=~"id"/i) { but this obviously fails. Which is the way to do it? Thanks. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 1

[OpenSER-Users] Openser and mysql script
by Yann Derichard 18 Jul '08

18 Jul '08

Hi, I am using Ubuntu 8.04 and I have just installed Openser 1.3.1 via debian package (with mysql and presence modules) to do presence with my computer but I am not able to find "openser_mysql.sh" script to configure my database. So I downloaded the src package on openser ftp and unpack it but the script is still missing. Is someone could tell me where I could download it ? Or if I did something wrong during my installation ? Regards -- Yann Derichard

2 2

[OpenSER-Users] Limiting maximum number of concurrent calls
by Rana Dhekial 18 Jul '08

18 Jul '08

Hi, We are running openeser version 1.2.2. Currently we have defined 3 groups of subscribers. We have a requirement of limiting max number of concurrent calls per group. For example, 10 maximum number of concurrent ( incoming /outgoing ) calls for subscribers belonging to group 1. How do we go about it. Any sample config will be appreciated. thanks, dhekial _________________________________________________________________ With Windows Live for mobile, your contacts travel with you. http://www.windowslive.com/mobile/overview.html?ocid=TXT_TAGLM_WL_mobile_07…

4 4

[OpenSER-Users] OpenSER sending BYE to private IP behind NAT
by Bruno Machado 17 Jul '08

17 Jul '08

Hi Lee You are not running the 'fix_nated_contact' function for INVITE messages. Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses

1 0

[OpenSER-Users] OpenSER sending BYE to private IP behind NAT
by George Lee 17 Jul '08

17 Jul '08

Hi Experts, I have one SIP UA on private IP behind NAT and another 1 on public IP. They both registered to OpenSER and they could call each other. The problem is on call release. The BYE message sent from the UA on public IP could never get to the other UA on private IP. OpenSER kept on sending BYE to the private IP instead of sending it to the external NAT IP. I tried to use fix_nat_register() and fix_nat_contact() when REGISTER was received from the UA behind NAT but it didn't work. I also tried putting fix_nat_contact() on BYE and still no help. Am I missing anything? modparam("nathelper", "received_avp", "$avp(s:rcv)") . . . . . if (method == REGISTER) { if (nat_uac_test("2") || nat_uac_test("16")) { fix_nated_register(); # or fix_nated_contact(); } } . . . . . if (method == BYE) { fix_nated_contact(); } Thanks, whglee

1 0

[OpenSER-Users] Saving real IP:port using fix_nated_register()
by George Lee 17 Jul '08

17 Jul '08

Hi Experts, In my openser.cfg file, I tried to use the fix_nated_register() function to save the IP:port information when a REGISTER message is received. After I restart OpenSER, none of my SIP UAs could register to it anymore. Network traces showed "port unreachable". Can someone help? Thanks, whglee

2 1

Re: [OpenSER-Users] Does OPENSER support AAAA record (IPv6)?
by Fangyu Ling 17 Jul '08

17 Jul '08

Hi Klaus: Thanks for your answer. After I add dns_try_ipv6=yes in openser.cfg, my problem has been solved. But I wonder why the default value of dns_try_ipv6 is "yes" in version 1.2.x, but "no" in version 1.3.x? For my personal opinion, setting default value to "yes" is better than "no". Best Regards, Fang > Hi! > > Openser does support AAAA, when enabled: > http://www.openser.org/dokuwiki/doku.php/core-cookbook:1.3.x#dns_try_ipv6 > > regards > klaus > > Fangyu Ling wrote: >> In my DNS server, there are only AAAA records for any nodes. >> My test topology is as following: >> >> -----+---------+--------+------ >> | | | >> siphone1 openser siphone2 >> (UA1) (UA2) >> >> For the testing procedure, I only use domain name of the URI. >> When UA1 invited UA2 via openser, openser only ask A record >> of UA2. There are no A records in my DNS server! So, openser >> then replied 476 Unresolvable Destination message to UA1. >> >> In normal conditon, if there were no such name of A record, >> it should ask AAAA record instead. >> But why OPENSER only ask A record? >> >> Best Regards, >> Fang

2 1

[OpenSER-Users] Using t_replicate to replicate towards a UA
by Pascal Maugeri 17 Jul '08

17 Jul '08

Hi Is it possible to replicate incoming SIP requests (eg. REGISTER) to another remote user SIP URI instead of host URI: For instance I want to do (having previously registered to OpenSER the user pascal.maugeri(a)company.com): t_replicate("sip:pascal@company.com <sip%3Apascal(a)company.com>"); instead of t_replicate("sip:10.2.3.4:5060"); I tried it with OpenSER 1.3 but I get the error message when it tries to replicate: 3(8113) Main routing block. Method [REGISTER] 3(8113) ERROR: mk_proxy: could not resolve hostname: "company.com" 3(8113) ERROR: uri2proxy: bad host name in URI <sip:pascal@company.net<sip%3Apascal(a)company.net> > 3(8113) ERROR:tm:t_forward_nonack: failure to add branches I'm just wondering if what I want to do is possible ... Regards, Pascal

3 4

[OpenSER-Users] O'Reilly Media is looking for contributors
by Kristian Kielhofner 17 Jul '08

17 Jul '08

Hello OpenSER Users, O'Reilly Media has been working on an Asterisk Cookbook. Using the same printed format as other O'Reilly Cookbooks (Perl, Python, etc) O'Reilly Cookbooks offer practical solutions to problems in a fun "recipe" format. I myself have been working quite a bit with OpenSER in the last couple of years and I've asked the other authors if we should open up submissions for other recipes (including OpenSER). Everyone thinks it's a great idea. We are looking for a potentially new name and URL but the current "Asterisk Cookbook" Wiki can be found here: http://www.asteriskcookbook.com/ We'll be covering "Asterisk and friends". That means Asterisk, OpenSER, Cisco gateways, etc. Pretty much anything VoIP with at least an Open Source slant. Request an account and add your recipes to the recipe heap (you'll see my OpenSER recipes towards the bottom). See you there! -- Kristian Kielhofner http://blog.krisk.org

2 2

[OpenSER-Users] Problem with accounting in case of call forwarding from client
by Ruchir 16 Jul '08

16 Jul '08

I have problem with CDR manipulation in case of call forwarding from client. I'm testing with Linksys pap2 and I've set unconditional call forwarding. When linksys receives the call, it'll send 302, temporarily moved. I have done proper ACL checking using Diversion header in the new INVITE but I'm having difficulty associating the forwarded leg CDR to original call as this is totally new INVITE and none of the fields match in CDR. Can anyone guide me in right direction?

2 5

[OpenSER-Users] Does OPENSER support AAAA record (IPv6)?
by Fangyu Ling 16 Jul '08

16 Jul '08

In my DNS server, there are only AAAA records for any nodes. My test topology is as following: -----+---------+--------+------ | | | siphone1 openser siphone2 (UA1) (UA2) For the testing procedure, I only use domain name of the URI. When UA1 invited UA2 via openser, openser only ask A record of UA2. There are no A records in my DNS server! So, openser then replied 476 Unresolvable Destination message to UA1. In normal conditon, if there were no such name of A record, it should ask AAAA record instead. But why OPENSER only ask A record? Best Regards, Fang

2 1

Re: [Serusers] PRACK on forked response
by Stephen Paterson 15 Jul '08

15 Jul '08

Don't worry about this, I've found the problem and it was nothing to do with SER - the reliable 1xx was being sent without a contact header so the PRACK was being sent with the same RURI as the initial INVITE. Nothing SER could do but fork the PRACK. All working now I've fixed the UAS. Cheers Steve -----Original Message----- From: Stephen Paterson Sent: 15 July 2008 10:21 To: 'Michal Matyska' Cc: serusers(a)iptel.org Subject: RE: [Serusers] PRACK on forked response Hi Michal, Thanks for the reply and sorry for the delay. Had me a nice relaxing long weekend in the country! Anyhow, I've not set up anything special in the config file. I just installed SER and ran it straight out of the box as it were. It worked fine for my purposes so I felt no need to tinker with the config. There is no mention of forking or lookup_contacts in the config. Diff shows the only difference between my config file and the simple example one that comes with the distribution is at the top in the global configuration parameters section where I set a listen address. All the routing logic is identical. Cheers Steve -----Original Message----- From: Michal Matyska [mailto:michal.matyska@iptel.org] Sent: 09 July 2008 15:11 To: Stephen Paterson Cc: serusers(a)iptel.org Subject: Re: [Serusers] PRACK on forked response Hi, SER does not care about PRACK... it is just another within-dialog request type, like BYE and many others. I think you have incorrect routing script logic, where you fork even the within dialog requests (using lookup_contacts) instead of just following the record route set. Michal Stephen Paterson píše v St 09. 07. 2008 v 14:01 +0100: > Hi all, > > I'm using SER purely for testing purposes just now. Currently testing > our handling of forked responses and hit upon the following situation: > > My outgoing INVITE is forked to two UASs (also our own SIP endpoint), > one of which sends a reliable 180 and the other an unreliable 180. The > UAC sends a PRACK on the dialog ID of the reliable response but SER > forwards this response on to both UASs the result being the UAS that > sent the unreliable 180 responds to the PRACK with a 481 (the PRACK > contains a To-tag that part defines a dialog unknown to that UAS). I > confess I can't find anything describing this scenario in any RFC but > it strikes me as incorrect behaviour on SERs part. > > Does SER support PRACK? If not then no matter, I can live with it - it > doesn't affect the outcome of any call. If it does, does anyone have > any thoughts on this? > > Cheers > > Steve > > Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, > MK1 1PT, UK > Registration No: 1397386 (Wales) > > P Please consider the environment and don't print this e-mail unless > you really need to > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales) P Please consider the environment and don't print this e-mail unless you really need to

1 0

[OpenSER-Users] SIMPLE-XMPP Developer Workshop 2008
by Daniel-Constantin Mierla 15 Jul '08

15 Jul '08

Hello, for those interested in SIP/SIMPLE - XMPP(Jabber/GTalk) interoperability, there is going to be a workshop in Paris for developers in the first week of September. Agenda for openser is to identify a reliable xmpp library that follows latest XMPP specs and offers secure communication (TLS) which can be used to update and enhance the simple-xmpp gateway implementation. In addition, it is a good opportunity to deploy and test it against other implementations. If you have extra ideas for openser sip-xmpp, please write me or, better, join the event and help get it done. Detailed description of the event follows. Best regards, Daniel SIMPLE-XMPP Developer Workshop 2008 SIP/SIMPLE and XMPP share a lot of concepts but they are different in many aspects. Being nowadays the leading open protocols for voice, video, instant messaging and presence, the interconnection between them creates an unified communication environment for users in both sides. The workshop aims to bring together people with large expertise in both protocols, interested in development, testing and deployment of SIP/SIMPLE-XMPP solutions. With a permanent focus on innovation, the participants cover open source projects to private enterprises. You can join the event for free. Date: September 2-5, 2008 Place: INRIA, Paris, France Main organizers: - Philippe Sultan, INRIA - contributor to the XMPP/Jingle support in Asterisk, member of XMPP Standards Foundation - Olle E. Johansson, Edvina - main SIP developer of Asterisk - Daniel-Constantin Mierla, Asipto - co-founder Openser, developer of XMPP/Jabber gateway Goal: - kick up simple-xmpp interoperability Agenda guidelines: - identify common issues of simple-xmpp interoperability - define best-practice solutions and workarounds of delicate issues - coding sessions in existing applications such as Asterisk, Openser, Jabberd, Freeswitch, eJabberd, libraries, client applications, etc. - testing sessions - reports about past experiences and results of the workshop Target participants: - developers of simple-xmpp products - people interested in testing simple-xmpp products - people interested in building simple-xmpp communication environments Cost: - free registration (everybody pays for its traveling and accommodation) Registration: - via e-mail at simple-xmpp(a)asipto.com - please write the motivation to participate and add bullets into agenda if you like to approach new subjects. The organizers reserve the right to select a group of people that will contribute most as this is mainly a workshop to approach issues, test interoperability and design new solutions. - updates about the event are posted at: http://www.asipto.com/index.php/simple-xmpp-developer-workshop-2008/ Size: - up to 20 people As of Jul 15, 2008, participating companies are: - INRIA - http://www.inria.fr - SIP-XMPP interoperability in Asterisk (http://www.asterisk.org) - Edvina - http://www.edvina.net - SIP-XMPP interoperability in Asterisk (http://www.asterisk.org) - AG Projects - http://www.ag-projects.com - MSRP-XMPP Interoperability (http://www.msrprelay.org) - Asipto - http://www.asipto.com - SIP-XMPP interoperability in Openser (http://www.openser.org) General discussions about sip-xmpp can be conducted via mailing list: sip-xmpp [at] xmpp.org http://mail.jabber.org/mailman/listinfo/sip-xmpp -- Daniel-Constantin Mierla http://www.asipto.com

1 0

[Serusers] Limit call duration
by inge 15 Jul '08

15 Jul '08

Hi all, I would like to limit the call duration for two hours. Ideally, limitation could be drive by Seconds or Euros. Indeed, for example 10€ for mobile destination (0.1€/min for example) can allow the user to call during 100min. I have thinking of using SIPSAK to generate a BYE but I need something between SER and SIPSAK to do the calculation. What could be a workarround to do that ? Regards, Adrien .L

1 0

[Serusers] PRACK on forked response
by Stephen Paterson 15 Jul '08

15 Jul '08

Hi all, I'm using SER purely for testing purposes just now. Currently testing our handling of forked responses and hit upon the following situation: My outgoing INVITE is forked to two UASs (also our own SIP endpoint), one of which sends a reliable 180 and the other an unreliable 180. The UAC sends a PRACK on the dialog ID of the reliable response but SER forwards this response on to both UASs the result being the UAS that sent the unreliable 180 responds to the PRACK with a 481 (the PRACK contains a To-tag that part defines a dialog unknown to that UAS). I confess I can't find anything describing this scenario in any RFC but it strikes me as incorrect behaviour on SERs part. Does SER support PRACK? If not then no matter, I can live with it - it doesn't affect the outcome of any call. If it does, does anyone have any thoughts on this? Cheers Steve Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales) P Please consider the environment and don't print this e-mail unless you really need to

2 2

[OpenSER-Users] Registration redirect
by David Villasmil 15 Jul '08

15 Jul '08

Hello all! Lets say I have domain sip.xyz.com directed to IP 1.2.3.4. But I want customers to register and call usgin ip 9.8.7.6 which is NOT in the dns list for sip.xyz.com. If i'm not mistaken, doing a simple redirect I should be able to get my customers registered on 9.8.7.6. But is there any other considerations I should make? thanks! d

1 0

[OpenSER-Users] Adam Kusmirek : nie ma mnie w pracy.
by Adam Kusmirek 15 Jul '08

15 Jul '08

Nie będzie mnie w pracy od 2008-07-14 i nie wrócę przed 2008-07-28. Podczas nieobecności zastępuje mnie Tomek Mazan.

1 0

[OpenSER-Users] For Openser To Background
by Ali Jawad 15 Jul '08

15 Jul '08

Hi All When I start Openser it starts in the putty console and the output is displayed there, my softphone can logon during that time. If I do close that putty session my softphone can not logon anymore although if I do netstat it states that Openser is listening. Howe can I send openser to the background? Or make it work in daemon mode ? My config has this info debug=9 log_stderror=yes log_facility=LOG_LOCAL0 #fork=yes fork=no children=4 Thanks

2 1

[Serusers] Hello, request of the module for RFC 4474 Identity authentication
by Ge Zhang 15 Jul '08

15 Jul '08

Hello, everyone, I would like to install SER2.0 with the module of RFC 4474 Identity authentication. Could you please tell me which module implemented this if you know? Thanks a lot! Best regards, Ge

3 2

[OpenSER-Users] Openser - which b2bua to use ?
by Amit Jain 15 Jul '08

15 Jul '08

I have configured Openser and integrated with radius server. I have done auth and accounting too. Now i need some help for b2bua to terminate the session after prepaid credit is over. which is the recommended b2bua that i can use for my configuration. Please let me know, how to proceed further. Regards, Amit

6 7

[OpenSER-Users] Contacts in 3xx message on one line or multiple lines?
by Hiers, David 14 Jul '08

14 Jul '08

Hi, Openser seems to be happy with multiple contacts on one line in a 302 message. Contact:<sip:5551234567@255.16.250.13:5060;user=phone>;q=0.5,<sip:555123 4567@255.16.250.10:5060;user=phone>;q=0.25 If the leftmost contact is down, the rightmost contact is tried as expected. However, Openser does not like multiple lines of one contact per line: Contact: <sip:5551234567@255.16.250.16:5060;dtg=SIP-NS> Contact: <sip:5551234567@255.16.250.19:5060;dtg=SIP-NS> Openser uses the topmost contact and ignores the bottommost contact in the multiple line list. If the topmost contact is down, the bottommost is never tried. Is Openser supposed to be able to handle multiline contact lists? If so, what are the common configuration issues that we can expect to see? Thanks, David Hiers CCIE (R/S, V), CISSP ADP Dealer Services 2525 SW 1st Ave. Suite 300W Portland, OR 97201 o: 503-205-4467 f: 503-402-3277 This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.

2 1

[Serusers] checking permissions with if (!$f.gw_acl=="1")
by Davor Jovanovic 14 Jul '08

14 Jul '08

Hi all, I'm using SER2.0 (testing) and I have a question regarding checking the acl AVP to verify that the user is allowed to call PSTN destinations with if (!$f.gw_acl=="1") { ... In the "user_attrs" table I have this entry: uid name value type flags alice(a)xyz.hr gw_acl 1 2 61 before checking this "gw_acl" I do load attributes with load_attrs("$fu", "$fu.uid"); but I keep entering above "if" statement. So I would appreciate any help about how to solve this issue, in which tables I need to enter which values... I have solved this checking with avpops module and "avp_check" function, but as I already use new AVP schema in SER2.0 for loading other user attributes I would like to use it with this "gw_acl" also. Thanks /davor

2 2

[OpenSER-Users] Problems with BYE
by Jan P 14 Jul '08

14 Jul '08

Hi, I made a pretty basic openser config with Sipwise but Im having problems when sending BYE to my upstream SIP provider. When I do a CANCEL it works but sending BYE the server doesnt forward any packets. Here's a ngrep of whats happening. My complete openser.cfg can be found at http://port53.se/openser.txt # U 99.88.164.203:30824 -> 101.12.20.26:5060 BYE sip:0709955324@bbr-ssw.sto.la.aa.net SIP/2.0. Via: SIP/2.0/UDP 10.45.0.98:30824;branch=z9hG4bK-d87543-f13c745a11112e7c-1--d87543-;rport. Max-Forwards: 70. Route: <sip:101.12.20.26;lr;ftag=9a47eb12;nat=yes>. Route: <sip:sipgw.sds.se;lr>. Contact: <sip:0722465930@99.88.164.203:30824>. To: "0709955324"<sip:0709955324@proxy.realm.se>;tag=ecbc244f. From: "0722465930"<sip:0722465930@proxy.realm.se>;tag=9a47eb12. Call-ID: ZDYwNjNjMmYzMTdiZGE3NTc4Nzc4OTA2NjdkOTllYTU.. CSeq: 3 BYE. Proxy-Authorization: Digest username="30000",realm="proxy.realm.se",nonce="487473f9db3e3da3ae9c3115a6d87d2023cc6b0a",uri="sip:0709955324@bbr-ssw.sto.la.aa.net",response="d9dc90e88deba0d9ba428bc11554b193",algorithm=MD5. User-Agent: X-Lite release 1011s stamp 41150. Reason: SIP;description="User Hung Up". Content-Length: 0. . # U 101.12.20.26:5060 -> 99.88.164.203:30824 SIP/2.0 500 I'm terribly sorry, server error occurred (7/TM). Via: SIP/2.0/UDP 10.45.0.98:30824;branch=z9hG4bK-d87543-f13c745a11112e7c-1--d87543-;rport=30824;received=99.88.164.203. To: "0709955324"<sip:0709955324@proxy3.digisip.net>;tag=ecbc244f. From: "0722465930"<sip:0722465930@proxy3.digisip.net>;tag=9a47eb12. Call-ID: ZDYwNjNjMmYzMTdiZGE3NTc4Nzc4OTA2NjdkOTllYTU.. CSeq: 3 BYE. Server: OpenSer (1.1.0-notls (i386/linux)). Content-Length: 0. . #

2 3

Re: [OpenSER-Users] FW: OpenSER 1.3.2-tls - error tcp_blocking_connect
by Bogdan-Andrei Iancu 14 Jul '08

14 Jul '08

TLS uses a different port than TCP. TCP is 5060 and TLS is 5061. Regards, Bogdan pravin.swami(a)wipro.com wrote: > Hi Bogdan-Andrei Iancu, > > Thanks for your reply . > > When Sending a INVITE request without (no-TLS) proxy establishes TCP > connection successfully & call Succeeds. > But, when tried INVITE with (TLS) proxy fails to establish TCP > connection & get the below error. > > Am I missing something?? > Is there any configurable parameter which has to be used in ser.cfg > > Regards, > Pravin.swami > > > > > > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Monday, July 14, 2008 2:02 PM > To: Pravin Sidram swami (WT01 - MCE-Mobile Devices) > Cc: users(a)lists.openser.org > Subject: Re: [OpenSER-Users] FW: OpenSER 1.3.2-tls - error > tcp_blocking_connect > > Hi, > > The error message specks for it self : > Connection refused > > So, your OpenSER tried to open a TCP/TLS connection to an address where > nobody was listening. > > Regards, > Bogdan > > > pravin.swami(a)wipro.com wrote: > >> >> Hi... All , >> >> I have Configured OpenSER 1.3.2-tls source code & compiled >> successfully . >> >> Registration is successful with TLS handshake . >> >> Below is the scenario of my test . >> >> UA1 & UA2 clients Registers on TLS. >> >> When UA1 send INVITE request to UA2 >> >> I got the Following Error : >> >> : SIP/2.0 477 Send failed (477/TM) >> >> When i scanned through the logs of openser I got the following Message >> > > >> : proxy always trying to establish TCP connection but it Fails. >> >> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params >> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] >> DBG:core:tcp_send: no open tcp connection found, opening new one Jul >> 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error: >> flags 18 >> Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to >> retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415] >> ERROR:core:tcpconn_connect: >> tcp_blocking_connect failed >> Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11 >> 23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20 >> [22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11 >> 23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error >> Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff >> > > >> Jul 11 23:55:20 [22415] DBG:core:check_via_address: params >> 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] >> DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0 >> entered >> ACC: call missed: >> timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_ >> tag=;call_id=8307080595eido3erlzgw;code=477;reason=Request >> Failure >> >> - Presently i don't have any DNS server , is that >> really matters ?? >> - While openser tries to open TCP connection with >> UAS it's sending port ' 0 ' , but fails is it ok .?? , or Anything >> I'm missing in Configuration . >> I have Attahced config file Also. >> >> Thanks & Regards, >> Pravin.swami >> >>

1 0

[OpenSER-Users] Need Help on RLS.
by mahesh.peddi＠info-spectrum.com 14 Jul '08

14 Jul '08

Hi Experts, I need information on RLS. I have downloaded some material on RLS from internet. I have read document ,Though i got brief idea on this.I am not clear on how to proceed. I have to develop the code from scratch or and RPM is available. please suggest me on this. Regards, Mahesh Peddi Infospectrum India Pvt. Ltd. Cell: +91 9765775176 IP-Phone Ext. - 764

2 1

[OpenSER-Users] asterisk/openser/mysql
by Eliass Salim 14 Jul '08

14 Jul '08

Hi, I've installed asterisk on a computer and openser on an other, I already have a mysql database for openser, and I'm now trying to install one for asterisk, but when I type: CREATE DATABASE asterisk; USE asterisk; CREATE VIEW voicemail AS SELECT phplib_id as uniqueid, username as customer_id, 'default' as context, username as mailbox, vmail_password as password, CONCAT(first_name,' ',last_name) as fullname, email_address as email, NULL as pager, datetime_created as stamp FROM openser.subscriber WHERE vmail = TRUE; I have the following error: ERROR 1054 (42S22): Unknown column 'phplib_id' in 'field list' I already had this problem for opensertcl, but I fixed it by adding WEBSER="yes" on openserctlr. thanks, Eliass

3 8

[OpenSER-Users] FW: OpenSER 1.3.2-tls - error tcp_blocking_connect
by pravin.swami＠wipro.com 14 Jul '08

14 Jul '08

Hi... All , I have Configured OpenSER 1.3.2-tls source code & compiled successfully . Registration is successful with TLS handshake . Below is the scenario of my test . UA1 & UA2 clients Registers on TLS. When UA1 send INVITE request to UA2 I got the Following Error : : SIP/2.0 477 Send failed (477/TM) When i scanned through the logs of openser I got the following Message : proxy always trying to establish TCP connection but it Fails. Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] DBG:core:tcp_send: no open tcp connection found, opening new one Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error: flags 18 Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415] ERROR:core:tcpconn_connect: tcp_blocking_connect failed Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11 23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20 [22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11 23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0 entered ACC: call missed: timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_ta g=;call_id=8307080595eido3erlzgw;code=477;reason=Request Failure - Presently i don't have any DNS server , is that really matters ?? - While openser tries to open TCP connection with UAS it's sending port ' 0 ' , but fails is it ok .?? , or Anything I'm missing in Configuration . I have Attahced config file Also. Thanks & Regards, Pravin.swami Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 1

[OpenSER-Users] ERROR:registrar:update_contacts: invalid cseq for aor
by Dilip 14 Jul '08

14 Jul '08

Hello evryone, I am using openser-1.1.1-notls version. I am using auth_radius module for the registratrion. When i was firing the call continues then after some time openser gives me the error like ERROR:registrar:update_contacts: invalid cseq for aor <8885073>. This error comes continuesly and bcz of that retramision is increasing. I have used only this paramater of userloc module modparam("usrloc", "db_mode", 2) So what may be problem?? Can anybody help me to solve the problem. Can u explain me. Regards, Dilip

2 1

[OpenSER-Users] T.38 and RTP Read too short
by Jens Carl 14 Jul '08

14 Jul '08

Hey everybody, I use OpenSER (openser 1.3.2-tls (x86_64/linux), svnrevision: 2:4420) and the RTPproxy (1.1) and everything works fine expect for one thing. If I try to use T.38 with following scenario: SIP-FAX1 (NAT) <-> RTPProxy+OpenSER <-> Asterisk <-> Carrier the Asterisk always produce this kind of warning: 'WARNING[1493]: rtp.c:1145 ast_rtp_read: RTP Read too short'. The SIP-signaling with the re-INVITE works fine. If I get an re-INVITE I call the force_rpt_proxy( 'l' ). Has anybody an idea what I should change in the RTPproxy to get this scenario working? Thanks for your help, Jens

3 4

[Serusers] RTP-proxy behind NAT
by vicos hack 13 Jul '08

13 Jul '08

hello, I was wondering if any one have had any experience on making RTP-proxy work behind a Firewall-NAT-Router like in this: [Nated Clients] | | [ROUTER--NAT--FIREWALL] (192.168.5.1 / 77.95.143.30) | [ Openser/RTP-Proxy] (192.168.5.40) uses Dispatcher module to distribute calls to asterisk servers | | | | [ASTERISK]1(.41) [ASTERISK2](.42) | | | | --------[T1/PRI/SIP/H323]----- if so ,,how can this be achieve ? Thanks Vicox

1 0

[Serusers] OpenSER 1.3.2-tls - error tcp_blocking_connect
by pravin.swami＠wipro.com 13 Jul '08

13 Jul '08

Hi... All , I have Configured OpenSER 1.3.2-tls source code & compiled successfully . Registration is successful with TLS handshake . Below is the scenario of my test . UA1 & UA2 clients Registers on TLS. When UA1 send INVITE request to UA2 I got the Following Error : : SIP/2.0 477 Send failed (477/TM) When i scanned through the logs of openser I got the following Message : proxy always trying to establish TCP connection but it Fails. Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] DBG:core:tcp_send: no open tcp connection found, opening new one Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: poll error: flags 18 Jul 11 23:55:20 [22415] ERROR:core:tcp_blocking_connect: failed to retrieve SO_ERROR (111) Connection refused Jul 11 23:55:20 [22415] ERROR:core:tcpconn_connect: tcp_blocking_connect failed Jul 11 23:55:20 [22415] ERROR:core:tcp_send: connect failed Jul 11 23:55:20 [22415] ERROR:tm:msg_send: tcp_send failed Jul 11 23:55:20 [22415] ERROR:tm:t_forward_nonack: sending request failed Jul 11 23:55:20 [22415] DBG:tm:t_relay_to: t_forward_nonack returned error Jul 11 23:55:20 [22415] DBG:core:parse_headers: flags=ffffffffffffffff Jul 11 23:55:20 [22415] DBG:core:check_via_address: params 10.200.68.220, 10.200.68.220, 0 Jul 11 23:55:20 [22415] DBG:tm:run_trans_callbacks: trans=0xb5db7e50, callback type 128, id 0 entered ACC: call missed: timestamp=1215800720;method=INVITE;from_tag=20282693445eido3yklvo4;to_ta g=;call_id=8307080595eido3erlzgw;code=477;reason=Request Failure - Presently i don't have any DNS server , is that really matters ?? - While openser tries to open TCP connection with UAS it's sending port ' 0 ' , but fails is it ok .?? , or Anything I'm missing in Configuration . I have Attahced config file Also. Thanks & Regards, Pravin.swami Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 1

[Serusers] Modified Document about Solaris10_plus_SER-0.9.6_plus_SERweb-0.9.6
by muhammad akl 13 Jul '08

13 Jul '08

Hey All, well, more than one week i sent an e-mail to serusers mailing list about iptel's documentation outdated and asked peoples that who can help me in writing some topics related specifically to solaris10 os , but didn't get any response about that. so as usual do it myself and since i have rewitten this tutorial from ground i will update it frequently this new updated version include : 1- installing coolstack package for solaris and configuring it 2- installing SER version 0.9.6 3-installing SERweb version 0.9.6 thins TBD : 1-installing more configuration files like working with nat, pstn 2-installing SEMS and configure it to work with SER 3-integrate SER to work together with Asterisk for sems with ser i need really who can help me to do that and for the rest points i'll try my best to make them to real heres the document : http://muhammad.akl.googlepages.com/Solaris10-SER.0.9.6-SERweb-0.9.6.pdf the document is still in beta version so suggestions, corrections and feedbacks are welcomed. BR muhammad

4 5

Re: [Serusers] usrloc won't work after a couple days?
by lin9k＠yahoo.com 13 Jul '08

13 Jul '08

Hi Martin, Thanks for replying. I am using ser-0.9.6. How do I check the period of silence? I have also noticed that alias cannot be recorded/updated into mysql too. Looks like the problem is as you were referring. Which version has the fix? Where is the culprit? Ling ----- Original Message ---- From: Martin Hoffmann <hn(a)nvnc.de> To: lin9k(a)yahoo.com Cc: serusers(a)lists.iptel.org Sent: Tuesday, July 1, 2008 11:33:58 PM Subject: Re: [Serusers] usrloc won't work after a couple days? lin9k(a)yahoo.com wrote: > > I have setup ser to run with mysql. At beginning, it worked fine that > the mysql/ser/location table got the correct update. However, after 3 > days the table won't get updated. When I enable the mysql log I cannot > see any updating or inserting into that table. User registration is > still working fine but just not get updated into the location table. > Also, server_monitoring tables are working fine. Do you have a longer period of silence in between? I seem to remember that there was a problem with the connection between SER and MySQL getting shut down and SER not reconnecting. Dunno if this was in the SER version you are using, though. Regards, Martin

3 2

[Serusers] Solaris10_plus_SER-0.9.6_plus_SERweb-0.9.6
by Do Nguyen Ha 11 Jul '08

11 Jul '08

Hi Muhammad, > > On Thu, Jul 10, 2008 at 5:17 PM, muhammad akl <muhammad.akl(a)gmail.com> > wrote: >> This new updated version include : >> >> 1- installing coolstack package for solaris and configuring it >> 2- installing SER version 0.9.6 >> 3-installing SERweb version 0.9.6 thanks for great help the docs for SER is out date, that is why alot of people need help SER is stable but docs is not good for someone starting Openser is good docs for it Thanks

2 1

[OpenSER-Users] ipv4 and ipv6 intercommunication
by 苗杰 10 Jul '08

10 Jul '08

I'm a beginner at openser. What does the variable 'af' stand for?And what is the value of the optional? Thanks! 313 # Comment out three lines below if you want 314 # RTP for IPv4->IPv4 calls to go directly 315 # between UAs 316 if (af == inet) { 317 force_rtp_proxy("faii"); 318 t_on_reply("1"); 319 } 320 # proxy session from a Internal IPv4 321 # phone to a External IPv6 address 322 if (af == inet6) { 323 force_rtp_proxy("faie"); 324 t_on_reply("1"); 325 } 326 } 327 328 else if (lookup("location_inet6")) { 329 # proxy session from a External IPv6 330 # phone to a Internal IPv4 address 331 if (af == inet) { 332 force_rtp_proxy("faei"); 333 t_on_reply("1"); 334 } 335 336 # Comment out three lines below if you want 337 # RTP for IPv6->IPv6 calls to go directly 338 # between UAs 339 if (af == inet6) { 340 force_rtp_proxy("faee"); 341 t_on_reply("1"); 342 }

2 1

[OpenSER-Users] IPv6 and IPv4
by 苗杰 10 Jul '08

10 Jul '08

313 # Comment out three lines below if you want 314 # RTP for IPv4->IPv4 calls to go directly 315 # between UAs 316 if (af == inet) { 317 force_rtp_proxy("faii"); 318 t_on_reply("1"); 319 } 320 # proxy session from a Internal IPv4 321 # phone to a External IPv6 address 322 if (af == inet6) { 323 force_rtp_proxy("faie"); 324 t_on_reply("1"); 325 } 326 } 327 328 else if (lookup("location_inet6")) { 329 # proxy session from a External IPv6 330 # phone to a Internal IPv4 address 331 if (af == inet) { 332 force_rtp_proxy("faei"); 333 t_on_reply("1"); 334 } 335 336 # Comment out three lines below if you want 337 # RTP for IPv6->IPv6 calls to go directly 338 # between UAs 339 if (af == inet6) { 340 force_rtp_proxy("faee"); 341 t_on_reply("1"); 342 }

3 2

[OpenSER-Users] fix_nated_register() Error.
by Ali Jawad 10 Jul '08

10 Jul '08

Hi All I am getting this error on Openser 1.3 Jul 10 11:28:31 [20126] ERROR:nathelper:fixup_fix_nated_register: you must set 'received_avp' parameter. Must be same value as parameter 'received_avp' of registrar module Jul 10 11:28:31 [20126] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 386 Jul 10 11:28:31 [20126] ERROR:core:main: failed to fix configuration with err code -1 I used the example from nat-traversal.cfg I do believe the error is initiated from this section route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } Please advice.

3 6

[OpenSER-Users] ipv6 parsing error
by Andhika Gannesha Gemilang 09 Jul '08

09 Jul '08

Hi, Im trying to setup ipv6 for my openser. i add this line in my openser.cfg *LIsten=udp:[2004:fa22:337:4::81]:5060 Listen=tcp:[2004:fa22:337:4::81]:5060 *and then when im trying to register with my sip phone, i got these line: ERROR:core:parse_uri: bad char ':' in state 3 parsed: <sip:2004:fa22> (13) / <sip:2004:fa22:337:4::81> (23) Jul 8 12:02:52 [2977] ERROR:core:parse_sip_msg_uri: bad uri <sip:2004:fa22:337:4::81> Jul 8 12:02:52 [2977] WARNING:core:do_action: error in expression Jul 8 12:02:52 [2981] ERROR:core:parse_uri: bad char ':' in state 3 parsed: <sip:2004:fa22> (13) / <sip:2004:fa22:337:4::81> (23) Jul 8 12:02:52 [2981] ERROR:registrar:extract_aor: failed to parse Address of Record Jul 8 12:02:52 [2981] ERROR:registrar:save: failed to extract Address Of Record and these from tcpdump: 12:11:52.267529 IP6 2004:fa22:337:4::84.sip > 2004:fa22:337:4::81.sip: SIP, length: 488 12:11:52.272578 IP6 2004:fa22:337:4::81 > ff02::1:ff00:84: ICMP6, neighbor solicitation, who has 2004:fa22:337:4::84, length 32 12:11:52.273059 IP6 2004:fa22:337:4::84 > 2004:fa22:337:4::81: ICMP6, neighbor advertisement, tgt is 2004:fa22:337:4::84, length 32 12:11:52.273068 IP6 2004:fa22:337:4::81.sip > 2004:fa22:337:4::84.sip: SIP, length: 500 12:11:52.469341 IP6 2004:fa22:337:4::84.sip > 2004:fa22:337:4::81.sip: SIP, length: 671 12:11:52.470127 IP6 2004:fa22:337:4::81.sip > 2004:fa22:337:4::84.sip: SIP, length: 445 12:11:57.264948 IP6 fe80::213:20ff:feac:ce4f > 2004:fa22:337:4::81: ICMP6, neighbor solicitation, who has 2004:fa22:337:4::81, length 32 also, i have disabled the ip6tables. any assistance would be so helpful to me thankyou,

4 7

[OpenSER-Users] Is there a REFER function on Openser
by mark morreny 09 Jul '08

09 Jul '08

Hi, I am looking for a REFER function which can 1) redirect UA to another sip server and 2) get openser out of the hoop. Does Openser has this kind of feature? Thanks for all your help. Mark

2 1

[OpenSER-Users] ERROR: Error opening OpenSER's FIFO /tmp/openser_fifo
by suresh tattikota 09 Jul '08

09 Jul '08

hi all i am trying to add a module pua to Openser using loadmodule "pua.so" in openser.cfg i am geting some errors like this [root@info ~]# *openserctl moni* database engine 'MYSQL' loaded Control engine 'FIFO' loaded ERROR: Error opening OpenSER's FIFO /tmp/openser_fifo ERROR: Make sure you have line 'fifo=/tmp/openser_fifo' in your config please help me regarding this thank u

2 1

[OpenSER-Users] About Openser Message
by Ali Jawad 09 Jul '08

09 Jul '08

Hi All hi when I do a call on Openser it shows the following on my softphone CallStatus Message: 183 SESSION PROGRESS;Ringing-tone=TRUE; Can this message be changed, if so how? Thanks

1 0

[OpenSER-Users] INVITE NAT problem
by Juan Backson 09 Jul '08

09 Jul '08

Hi, I am working on getting my two SIP phones behind firewall to talk to each other. One client is SPA 921 and the other client is xlite; and I am force rport for all SIP requests from clients. When xlite sends a INVITE request to openser, openser tries to send to SPA 921, but the PORT is still 5060, instead of 22848. Therefore, Openser keeps resending INVITE to SPA 921 but never reaches it. Both linksys and xlite do send preiodic SUBSCRIBE/NOTIFY to Openser. Is there anything else I am missing? U 48.133.23.45:21395 -> 48.133.200.20:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Via: SIP/2.0/UDP 192.168.1.100:53722;branch=z9hG4bK-d87543-683f775fdd79a93d-1--d 87543-;rport. Max-Forwards: 70. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INF O. Content-Type: application/sdp. Supported: timer. User-Agent: X-Lite release 1011s stamp 41150. Content-Length: 371. . v=0. o=- 9 2 IN IP4 192.168.1.100. s=CounterPath X-Lite 3.0. c=IN IP4 192.168.1.100. t=0 0. m=audio 5416 RTP/AVP 107 119 100 106 0 105 98 8 101. a=fmtp:101 0-15. a=rtpmap:107 BV32/16000. a=rtpmap:119 BV32-FEC/16000. a=rtpmap:100 SPEEX/16000. a=rtpmap:106 SPEEX-FEC/16000. a=rtpmap:105 SPEEX-FEC/8000. a=rtpmap:98 iLBC/8000. a=rtpmap:101 telephone-event/8000. a=sendrecv. U 48.133.200.20:5060 -> 48.133.23.45:21395 SIP/2.0 100 Giving a try. Via: SIP/2.0/UDP 192.168.1.100:53722;branch=z9hG4bK-d87543-683f775fdd79a93d-1--d 87543-;rport=21395;received=48.133.23.45. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Server: OpenSER (1.3.2-notls (i386/linux)). Content-Length: 0. . U 48.133.200.20:5060 -> 48.133.23.45:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.23.45:5060 -> 48.133.200.20:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.200.20:5060 -> 48.133.23.45:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.23.45:5060 -> 48.133.200.20:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.200.20:5060 -> 48.133.23.45:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.23.45:5060 -> 48.133.200.20:5060 INVITE sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> SIP/2.0. Record-Route: <sip:48.133.200.20;lr=on;ftag=12709c02>. Via: SIP/2.0/UDP 48.133.200.20;branch=z9hG4bK0996.d020a552.0. Via: SIP/2.0/UDP 192.168.1.100:53722;received=48.133.23.45;branch=z9hG4bK-d8754 3-683f775fdd79a93d-1--d87543-;rport=21395. Max-Forwards: 69. Contact: <sip:2000@48.133.23.45:21395>. To: "1005"<sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=12709c02. Call-ID: MzRjM2RkZjQxNDk3ZjVjOTFhMzYyZmM0MThmODI3N2U.. CSeq: 1 INVITE. Session-Expires: 95. Min-SE: 90. Allow: INVITE, U 48.133.23.45:21395 -> 48.133.200.20:5060 SUBSCRIBE sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45> SIP/2.0. Via: SIP/2.0/UDP 192.168.1.100:53722;branch=z9hG4bK-d87543-d900ee1c55767008-1--d 87543-;rport. Max-Forwards: 70. Contact: <sip:2000@48.133.23.45:21395>. To: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>. From: "2000"<sip:2000@48.133.23.45 <sip%3A2000(a)48.133.23.45>>;tag=8b347a51. Call-ID: MzY3NGIwNTJlMWY5Njg2MmM5YmI1NTIxNTRjZjljYzM.. CSeq: 1 SUBSCRIBE. Expires: 300. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INF O. Supported: timer. User-Agent: X-Lite release 1011s stamp 41150. Event: message-summary. Content-Length: 0. . U 48.133.23.45:22840 -> 48.133.200.20:5060 NOTIFY sip:48.133.23.45 SIP/2.0. Via: SIP/2.0/UDP 192.168.1.101:5060;branch=z9hG4bK-2c2e52f6;rport. From: "1005" <sip:1005@48.133.23.45 <sip%3A1005(a)48.133.23.45> >;tag=a45646112863dco0. To: <sip:48.133.23.45>. Call-ID: ad4c4ce-bb2b86f4(a)192.168.1.101. CSeq: 1017 NOTIFY. Max-Forwards: 70. Event: keep-alive. User-Agent: Sipura/SPA921-4.1.10(b). Content-Length: 0. . Any suggestion will be helpful. JB

3 2

[OpenSER-Users] [MediaProxy] Sessions ends ("did timeout") during the INVITE
by Iñaki Baz Castillo 09 Jul '08

09 Jul '08

Hi, I'm suffering an important issue with MediaProxy in calls from/to my carrier softswitch. Sometimes it seems that MediaProxy assigns a media port during the INVITE but it closes it inmediatelly, so the following 183 forces the creation of a different media port and obviously the media dies. It works perfectly for long days but some days it has those problems. Please, could you people help me in investigating if a problem in my OpenSer/MediaProxy? I have a detailed real example. This is what happens: --------------------------------------------------------------------------- 09:28:46 - INVITE Client -> OpenSer (audio: 192.168.1.203:10370) 09:28:46 - INVITE OpenSer -> gateway (audio: 88.99.3.10:60696) <-- MediaProxy set 60696 port but inmediatelly ends the session. 09:28:48 - 183 Gateway -> OpenSer (audio: 66.11.6.142:45734) 09:28:48 - 183 OpenSer -> Client (audio: 88.99.3.10:60698) <-- Wrong port, MediaProxy set 60698 port !!! 09:28:49 - 200 Gateway -> OpenSer (audio: 66.11.6.142:45734) 09:28:49 - 200 OpenSer -> Client (audio: 88.99.3.10:60704) <-- Wrong port, MediaProxy set 60704 port !!! --------------------------------------------------------------------------- This is the mediaproxy/proxydispatcher log. As you can see media port open during INVITE is inmediatelly closed WHY?): --------------------------------------------------------------------------------------- ### 09:28:46 - 9:28:46 openser-host proxydispatcher[31874]: request 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 192.168.1.203:10370:audio 88.99.1.192 sip.domain.net local 66.11.0.144 remote Domain=20-=20Asterisk=20PBX info=from:216@sip.domain.net,to:996511959@sip.domain.net,fromtag:as3c11216c,totag: - 09:28:46 openser-host mediaproxy[31869]: request 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 192.168.1.203:10370:audio 88.99.1.192 sip.domain.net local 66.11.0.144 remote Domain=20-=20Asterisk=20PBX info=totag:,to:996511959@sip.domain.net,from:216@sip.domain.net,fromtag:as3c11216c - 09:28:46 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: started. listening on 88.99.3.10:60696 - 09:28:46 openser-host mediaproxy[31869]: execution time: 0.60 ms - 09:28:46 openser-host proxydispatcher[31874]: forwarding to mediaproxy on /var/run/mediaproxy.sock: got: '88.99.3.10 60696' - 09:28:46 openser-host proxydispatcher[31874]: execution time: 2.45 ms **************** ERROR: Why does it occur ??? *********************** - 09:28:46 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) - 09:28:46 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: ended (did timeout). ********************************************************************* ### 09:28:48 - 09:28:48 openser-host proxydispatcher[31874]: lookup 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 66.11.6.142:45734:audio 66.11.0.144 sip.domain.net local unknown unknown CS2000_NGSS/9.0 info=from:216@sip.domain.net,to:996511959@sip.domain.net,fromtag:as3c11216c,totag:4d764120338220087992847 - 09:28:48 openser-host mediaproxy[31869]: lookup 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 66.11.6.142:45734:audio 66.11.0.144 sip.domain.net local unknown unknown CS2000_NGSS/9.0 info=totag:4d764120338220087992847,to:996511959@sip.domain.net,from:216@sip.domain.net,fromtag:as3c11216c - 09:28:48 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: started. listening on 88.99.3.10:60698 - 09:28:48 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: ended (did timeout). ### 09:28:58 - 09:28:58 openser-host proxydispatcher[31874]: lookup 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 66.11.6.142:45734:audio 66.11.0.144 sip.domain.net local unknown unknown CS2000_NGSS/9.0 info=from:216@sip.domain.net,to:996511959@sip.domain.net,fromtag:as3c11216c,totag:4d764120338220087992847 - 09:28:58 openser-host mediaproxy[31869]: lookup 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net 66.11.6.142:45734:audio 66.11.0.144 sip.domain.net local unknown unknown CS2000_NGSS/9.0 info=totag:4d764120338220087992847,to:996511959@sip.domain.net,from:216@sip.domain.net,fromtag:as3c11216c - 09:28:58 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: started. listening on 88.99.3.10:60704 - 09:28:58 openser-host mediaproxy[31869]: execution time: 0.62 ms - 09:28:58 openser-host proxydispatcher[31874]: forwarding to mediaproxy on /var/run/mediaproxy.sock: got: '88.99.3.10 60704' - 09:28:58 openser-host proxydispatcher[31874]: execution time: 1.15 ms **************** ERROR: Why does it occur ??? *********************** - 09:28:59 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: 0/0/0 packets, 0/0/0 bytes (caller/called/relayed) - 09:28:59 openser-host mediaproxy[31869]: session 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net: ended (did timeout). ********************************************************************* ### 09:29:05 - 09:29:05 openser-host proxydispatcher[31874]: delete 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net info= - 09:29:05 openser-host mediaproxy[31869]: delete 5be83da413f9dbd468a6d83818fb356d(a)sip.domain.net info= --------------------------------------------------------------------------------------- I also attach the complete SIP capture of this real example, but I see nothing wrong in it. The question is: Why MediaProxy ends the session during the INVITE? why does it close the port? Thanks a lot for any help. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

1 1

[OpenSER-Users] Compiling / running Mediaproxy 2.0 on Debian Lenny
by jh＠tutpro.com 08 Jul '08

08 Jul '08

mediaproxy diapatcher works in ubuntu hardy, but not in lenny. the only difference i see is tls/python related versions is in python-gnutls: hardy: python-gnutls 1.1.4-1 lenny: python-gnutls 1.1.5-2 -- juha

2 4

Re: [OpenSER-Users] getting error while adding module to openser
by Bogdan-Andrei Iancu 08 Jul '08

08 Jul '08

Well, the error message is quite self explaining: *No such file or directory* check if the */usr/src/OpenSER/openser-1.2.0-tls/modules/pna.so *really exists. Regards, Bogdan suresh tattikota wrote: > > hi > i checked it in log file,i am getting these errors > > *ERROR: load_module: could not open module > </usr/src/OpenSER/openser-1.2.0-* > ** > *tls/modules/pna.so>: > /usr/src/OpenSER/openser-1.2.0-tls/modules/pna.so: cannot open shared > object file: No such file or directory > * > *openser: parse error (54,13-14): failed to load module* > > *ERROR: no version info in module > </usr/local/lib/openser/modules/pna.so>: > /usr/local/lib/openser/modules/pna.so: undefined symbol: module_version* > > * ERROR: no version info in module > </usr/local/lib/openser/modules/pna.so>: > /usr/local/lib/openser/modules/pna.so: undefined symbol: module_version > * > > > thank u > > > On 7/7/08, *Bogdan-Andrei Iancu* <bogdan(a)voice-system.ro > <mailto:bogdan@voice-system.ro>> wrote: > > Hi > > is tour openser starting or not? if not, look (eventually in > syslog) for any startup errors. > > Regards, > Bogdan > > suresh tattikota wrote: > > hi all > ** *this is the steps i followed to add module * > ** * i took one example module as exMod and this exMod sub > directory is in directory called /modules * > ** ** *1. created one makefile * > *2.one .c file with one printf statement , .h file for > corresponding .c file * > *3.and added loadmodule "exMod.so" in openser.cfg file then * > *4. i run the openser with * make prifix=/usr/local/ all and > make prifix=/usr/local/ install > 5 while i am running the openser it is not showing any thing > *the .c an .h file of my* *exMod are * > > *exMod.c:* > > void print_modname() > { > > printf("this is module name "); > } > > *exMod.h* > > void print_modname(); > > and my Makefile is : > > include ../../Makefile.defs > auto_gen= > NAME=exMod.so > DEFS+=-I$(LOCALBASE)/include > LIBS= > > include ../../Makefile.modules > > so please help me regarding this > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > >

1 0

[OpenSER-Users] Strange REGISTER problem
by mark morreny 08 Jul '08

08 Jul '08

Hi, I am experiencing a very strange problem with REGISTER. If my SIP client registers to Openser with openser's internal IP ( 192.168.1.104), then it works. But if the SIP client registers using Openser's public IP, it does not work. The 200K returned from Openser is different for each case. For the 1st case, my SIP client recognizes the 200 OK, but for the 2nd case, my SIP client will keep on sending another REGISTER upon receiving the 200 OK. Here are the two different 200 OK msg that Openser sends back to the client. U 192.168.1.104:5060 -> 192.168.1.100:44522 SIP/2.0 200 OK. Via: SIP/2.0/UDP 192.168.1.100:44522 ;branch=z9hG4bK-d87543-7e47d706ec23b831-1--d87543-;rport=44522. To: "1006"<sip:1006@192.168.1.104 <sip%3A1006(a)192.168.1.104> >;tag=329cfeaa6ded039da25ff8cbb8668bd2.b23f. From: "1006"<sip:1006@192.168.1.104 <sip%3A1006(a)192.168.1.104> >;tag=7e6bbb05. Call-ID: MGYyMjczODBmNTRkMzA3Y2JmZjk4ODM0MjkxOWI5ZDQ.. CSeq: 2 REGISTER. Contact: <sip:1006@192.168.1.100:16728;rinstance=d380362012deaf00>;expires=1909, <sip:1006@192.168.1.100:16727;rinstance=94567af350ff0cad>;expires=1870, <sip:1006@192.168.1.100:25572;rinstance=57a835af07252a9e>;expires=3286, < U 192.168.1.104:5060 -> 78.251.75.157:16156 SIP/2.0 200 OK. Via: SIP/2.0/UDP 192.168.1.100:2388 ;branch=z9hG4bK-d87543-f0701c5a1050361a-1--d87543-;rport=16156;received= 78.251.75.157. To: "1006"<sip:1006@58.251.75.157 <sip%3A1006(a)58.251.75.157> >;tag=329cfeaa6ded039da25ff8cbb8668bd2.b13f. From: "1006"<sip:1006@58.251.75.157 <sip%3A1006(a)58.251.75.157> >;tag=48233454. Call-ID: ZDVjODBlMjAxODQ5ZjAxYTRkYzRjYzUxMjY3YzAxNjk.. CSeq: 2 REGISTER. Contact: <sip:1006@192.168.1.100:16728;rinstance=d380362012deaf00>;expires=1493, <sip:1006@192.168.1.100:16727;rinstance=94567af350ff0cad>;expires=1454, <sip:1006@192.168.1.100:25572;rinstance=57a835af072 Any help will be greatly appreciated. Thanks, Mark

1 1

[OpenSER-Users] problem with linksys SPA 921
by Juan Backson 08 Jul '08

08 Jul '08

Hello I am using Linksys spa 921 to talk to openser. The problem I am having is that when the phone gets a 401 Unauthorized msg from Openser during REGISTER, instead of re-register with digest, it sends back another Unauthorized msg to openser. Does anyone know when this is happening? U 43.34.342.12:16309 -> 43.43.22.124:5060 REGISTER sip:43.34.342.12 SIP/2.0. Via: SIP/2.0/UDP 192.168.1.101:5060;branch=z9hG4bK-aed7e028. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12>. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. Max-Forwards: 70. Contact: "1005" <sip:1005@192.168.1.101:5060>;expires=3600. User-Agent: Sipura/SPA921-4.1.10(b). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. . U 43.43.22.124:5060 -> 43.34.342.12:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 192.168.1.101:5060 ;branch=z9hG4bK-aed7e028;received=43.34.342.12. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12 >;tag=329cfeaa6ded039da25ff8cbb8668bd2.60bb. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. WWW-Authenticate: Digest realm="43.43.22.124", nonce="487395d9bbe456c575a7a45745b7ec760b372923". Server: OpenSER (1.3.2-notls (i386/linux)). Content-Length: 0. . U 43.34.342.12:5060 -> 43.43.22.124:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 192.168.1.101:5060 ;branch=z9hG4bK-aed7e028;received=43.34.342.12. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12 >;tag=329cfeaa6ded039da25ff8cbb8668bd2.60bb. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. WWW-Authenticate: Digest realm="43.43.22.124", nonce="487395d9bbe456c575a7a45745b7ec760b372923". Server: OpenSER (1.3.2-notls (i386/linux)). Content-Length: 0. . U 43.34.342.12:16309 -> 43.43.22.124:5060 REGISTER sip:43.34.342.12 SIP/2.0. Via: SIP/2.0/UDP 192.168.1.101:5060;branch=z9hG4bK-aed7e028. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12>. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. Max-Forwards: 70. Contact: "1005" <sip:1005@192.168.1.101:5060>;expires=3600. User-Agent: Sipura/SPA921-4.1.10(b). Content-Length: 0. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. . U 43.43.22.124:5060 -> 43.34.342.12:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 192.168.1.101:5060 ;branch=z9hG4bK-aed7e028;received=43.34.342.12. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12 >;tag=329cfeaa6ded039da25ff8cbb8668bd2.60bb. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. WWW-Authenticate: Digest realm="43.43.22.124", nonce="487395dd63fe51d4006fddeab235203120c8faca". Server: OpenSER (1.3.2-notls (i386/linux)). Content-Length: 0. . U 43.34.342.12:5060 -> 43.43.22.124:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 192.168.1.101:5060 ;branch=z9hG4bK-aed7e028;received=43.34.342.12. From: "1005" <sip:1005@43.34.342.12>;tag=b19e671c4f6697beo0. To: "1005" <sip:1005@43.34.342.12 >;tag=329cfeaa6ded039da25ff8cbb8668bd2.60bb. Call-ID: 6e601902-41d31f68(a)192.168.1.101. CSeq: 23942 REGISTER. WWW-Authenticate: Digest realm="43.43.22.124", nonce="487395dd63fe51d4006fddeab235203120c8faca". Server: OpenSER (1.3.2-notls (i386/linux)). Content-Length: 0. . Any suggestion to solving this problem will be great. JB

3 2

[OpenSER-Users] Can't add user to Mysql DB
by Eliass Salim 08 Jul '08

08 Jul '08

I installed openser 1.3, now I loaded Mysql module and made the required changes in /etc/openser/openserctlrc file. When I run the command: openserctl add 100 100 100@localhost I get the follwoing error: ERROR 1054 (42S22) at line 1: Unknown column 'phplib_id' in 'field list' ERROR: introducing the new user '192.168.10.182' to the database failed Any idea what's going on? thanks

1 0

[OpenSER-Users] regarding openser v 1.2.0 installation
by Naveen Kumar 08 Jul '08

08 Jul '08

Hi all, i deleted openser.pid from /var/runand then i started [root@info sbin]# openserctl start database engine 'MYSQL' loaded Control engine 'FIFO' loaded Starting OpenSER : ERROR: PID file /var/run/openser.pid does not exist -- OpenSER start failed and then i started like: [root@info sbin]# openser start 0(22725) cfg. warning: (28,15-16): tls support not compiled in 0(22725) cfg. warning: (29,10-13): tls support not compiled in 0(22725) cfg. warning: (30,21-22): tls support not compiled in 0(22725) cfg. warning: (31,21-22): tls support not compiled in 0(22725) cfg. warning: (32,34-35): tls support not compiled in 0(22725) cfg. warning: (33,14-19): tls support not compiled in 0(22725) cfg. warning: (34,20-21): tls support not compiled in 0(22725) cfg. warning: (35,20-21): tls support not compiled in 0(22725) cfg. warning: (36,16-17): tls support not compiled in 0(22725) loading module /usr/local/lib/openser/modules/mysql.so 0(22725) loading module /usr/local/lib/openser/modules/sl.so 0(22725) loading module /usr/local/lib/openser/modules/tm.so 0(22725) DEBUG: register_pv: tm 0(22725) xl_add_extra_spec: extra items list is not initialized 0(22725) xl_add_extra_spec: inserting extra item [T_branch_idx] at [0] 0(22725) xl_add_extra_spec: inserting extra item [T_reply_code] at [1] 0(22725) loading module /usr/local/lib/openser/modules/rr.so 0(22725) loading module /usr/local/lib/openser/modules/maxfwd.so 0(22725) loading module /usr/local/lib/openser/modules/usrloc.so 0(22725) loading module /usr/local/lib/openser/modules/registrar.so 0(22725) loading module /usr/local/lib/openser/modules/textops.so 0(22725) loading module /usr/local/lib/openser/modules/mi_fifo.so 0(22725) loading module /usr/local/lib/openser/modules/auth.so 0(22725) loading module /usr/local/lib/openser/modules/auth_db.so 0(22725) set_mod_param_regex: mi_fifo matches module mi_fifo 0(22725) set_mod_param_regex: found <fifo_name> in module mi_fifo [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: usrloc matches module usrloc 0(22725) set_mod_param_regex: found <db_mode> in module usrloc [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: usrloc matches module usrloc 0(22725) set_mod_param_regex: found <db_url> in module usrloc [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: auth_db matches module auth_db 0(22725) set_mod_param_regex: found <db_url> in module auth_db [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: auth_db matches module auth_db 0(22725) set_mod_param_regex: found <calculate_ha1> in module auth_db [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: auth_db matches module auth_db 0(22725) set_mod_param_regex: found <password_column> in module auth_db [/usr/local/lib/openser/modules/] 0(22725) set_mod_param_regex: rr matches module rr 0(22725) set_mod_param_regex: found <enable_full_lr> in module rr [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <mf_process_maxfwd_header>(1) in module maxfwd [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <record_route>(0) in module rr [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <loose_route>(0) in module rr [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <append_hf>(1) in module textops [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <append_hf>(1) in module textops [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <www_authorize>(2) in module auth_db [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <www_challenge>(2) in module auth [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <save>(1) in module registrar [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <lookup>(1) in module registrar [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <append_hf>(1) in module textops [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <lookup>(1) in module registrar [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <sl_send_reply>(2) in module sl [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <append_hf>(1) in module textops [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <t_relay>(0) in module tm [/usr/local/lib/openser/modules/] 0(22725) find_cmd_export_t: found <sl_reply_error>(0) in module sl [/usr/local/lib/openser/modules/] ERROR: bad config file (9 errors) 0(22725) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not allocated -> nothing to destroy 0(22725) DEBUG: tm_shutdown : start 0(22725) DEBUG: tm_shutdown : emptying hash table 0(22725) DEBUG: tm_shutdown : releasing timers 0(22725) DEBUG: tm_shutdown : removing semaphores 0(22725) DEBUG: tm_shutdown : destroying tmcb lists 0(22725) DEBUG: tm_shutdown : done 0(22725) shm_mem_destroy please anybody help me. With Best Regards, Naveen.

5 7

[OpenSER-Users] ERROR: load_module: could not open module
by suresh tattikota 08 Jul '08

08 Jul '08

hi all i am getting these errors wile running the openser *ERROR: load_module: could not open module </usr/src/OpenSER/openser-1.2.0-* ** *tls/modules/pna.so>: /usr/src/OpenSER/openser-1.2.0-tls/modules/pna.so: cannot open shared object file: No such file or directory * *openser: parse error (54,13-14): failed to load module* *ERROR: no version info in module </usr/local/lib/openser/modules/pna.so>: /usr/local/lib/openser/modules/pna.so: undefined symbol: module_version* * ERROR: no version info in module </usr/local/lib/openser/modules/pna.so>: /usr/local/lib/openser/modules/pna.so: undefined symbol: module_version * thank u

2 1

[OpenSER-Users] help serMyAdmin centos 5
by Ricky Gutierrez 08 Jul '08

08 Jul '08

hi list, I have some problems installing serMyAdmin in centos 5 and openser 1.3.2, I have running tomcat5 and it loads very well, but when I add inside the file context.xml, it doesn't load , it show me a http STATUS 404.. that it can be happening? I show them my file context.xml <?xml version="1.0" encoding="UTF-8"?>  <Context>  <WatchedResource>WEB-INF/web.xml</WatchedResource>   </Context> <Context path="/serMyAdmin"> <Resource auth="Container" driverClassName="com.mysql.jdbc.Driver" maxActive="20" maxIdle=" 10" maxWait="-1" name="jdbc/openser_MySQL" type="javax.sql.DataSource" url="jdbc:mysql://loc alhost:3306/openser" username="sermyadmin" password="holacisco23/> </Context> Another point, the openser database and serMyAdmin don't export me, when I export the serMyAdmin openser.sql, he throws me the following error: ERROR 1054 (42S22) at line 6: Unknown column 'version' in 'field list' I waiting for their help, I congratulate to the serMyAdmin developer for this excellent application, he looks at very good to work with openser rickygm

1 0

[Serusers] Iptel's Documentation Resources (caution !! out of date )
by muhammad akl 07 Jul '08

07 Jul '08

well , today i was browsing the documentation section of the iptel.org to get more information about SER to include them in my graduation's presentation ( yea i'll get rid of that college :D ) what i notice there most of the documents are out of date and one cannot get full information about some issues ( the most interesting sentence was for the admin guide " warning outdated !! " ) so my question " is there any hope to see a well-organized documents that one can depends on , meaning rewrite some sections , wrting more howto's and the most important issue is to rewrite the INSTALL file that comes with the source code for SER " and for that i will make some documents especially directed for solaris10 and opensolaris' area soon some of them : 1- installing SER' requirements for solaris 10 and opensolaris 2- full explaination for SER compilation process on either solaris10 or opensolaris 3- install SAMP package ( apache2 , mysql5 , php5 ) either using coolstack or via package manager of opensolaris 4- installing serweb on either solaris 10 or opensolaris 5 integration of SER plus Asterisk and how to make the right configuration so if any one could help me in the preceding points or to help do more work like howto configure SEMS and SER for media streaming and other issues i'd appreciate that and finally sorry for my poor english :) BR muhammad

2 1

[OpenSER-Users] getting error while adding module to openser
by suresh tattikota 07 Jul '08

07 Jul '08

hi all ** *this is the steps i followed to add module * ** * i took one example module as exMod and this exMod sub directory is in directory called /modules * ** ** *1. created one makefile * *2.one .c file with one printf statement , .h file for corresponding .c file * *3.and added loadmodule "exMod.so" in openser.cfg file then * *4. i run the openser with * make prifix=/usr/local/ all and make prifix=/usr/local/ install 5 while i am running the openser it is not showing any thing *the .c an .h file of my* *exMod are * *exMod.c:* void print_modname() { printf("this is module name "); } *exMod.h* void print_modname(); and my Makefile is : include ../../Makefile.defs auto_gen= NAME=exMod.so DEFS+=-I$(LOCALBASE)/include LIBS= include ../../Makefile.modules so please help me regarding this

2 1

[OpenSER-Users] openser ported to Intel Debian 64bits?
by Pablo Bertuzzi 07 Jul '08

07 Jul '08

Hello Everyone!, I have to install openser in production these days. So, is there any plan to port openser to Debian 64bits on Intel machines? kind regards, Pablo.

2 1

[OpenSER-Users] DNS/ENUM resolution
by Yazid Hadj Said 07 Jul '08

07 Jul '08

Hi all, If I modify R-URI, the DNS/ENUM resolution (choice of destination of this request) is made with the original RURI or with the new RURI Regards Yazid

3 2

[OpenSER-Users] Can't add user to Mysql DB
by Eliass Salim 07 Jul '08

07 Jul '08

I installed openser 1.3, now I loaded Mysql module and made the required changes in /etc/openser/openserctlrc file. When I run the command: openserctl add 100 100 100@localhost I get the follwoing error: ERROR 1054 (42S22) at line 1: Unknown column 'phplib_id' in 'field list' ERROR: introducing the new user '192.168.10.182' to the database failed Any idea what's going on? thanks

2 1

[OpenSER-Users] Crashes with OpenSER and RTP Proxy
by Samuel Muller 07 Jul '08

07 Jul '08

Hello all, This e-mail to find some help, i'm desperate. I've many stability problems, when using RTP Proxy + OpenSER. Maybe it's hardware, maybe ... I really don't know. -> Infos : Server : Dell PowerEdge dual Xeon, 2 GB RAM, PERC 6i RAID card. OS: i tried all these one : . ubuntu gutsy . ubuntu hardy . debian etch . debian lenny (actually running) the problems are the same on each distro. it's AMD64 architecture-based : Linux 2.6.18-6-amd64 #1 SMP Fri Jun 6 05:24:08 UTC 2008 x86_64 GNU/Linux I need mySQL, NAT, and Radius support (Radiator used). I compilated as indicated, to enable in the acc module the support of Radius. I used the libradius (radiusclient-ng 0.5.6), and tried too with the libradius-ng2. sources : http://www.openser.org/dokuwiki/doku.php/install:make-debian-packages http://www.openser.org/dokuwiki/doku.php/install:backport-debian-source-pac… and some related websites like voip-info.org, ... then, i tried these pairs : RTP Proxy 1.02 + OpenSER 1.3.1 : crash RTP Proxy 1.02 + OpenSER 1.3.2 : crash (actually running) RTP Proxy 1.1 + OpenSER 1.3.1 : crash RTP Proxy 1.1 + OpenSER 1.3.2 : crash But, at each first running, all works fine : NAThelper, Radius, mySQL. Registrations are ok, accounting tickets and mySQL requests too, calls are fine, ... And when i changed one line of config, for example, an AVP value, it crashes at restart or just at the start, for different reasons each time. The processes become ghosts, or never restart, etc... See all the debug files in attached files - in this case, it's the NAThelper who crashed - but sometimes it works really fine ... even if i don't touch any configuration. If you need more infos, or another kind of crash, no pbm ... Many thanks to all for any suggestions, this situation makes me crazy. Samuel MULLER

2 2

[OpenSER-Users] 2 problems with serMyAdmin
by Ahmed Huraimel 07 Jul '08

07 Jul '08

hello all, i am facing two problems with serMyAdmin.05-beta. the problems are 1- Error when adding a user in groups 2- wrong table attributes when adding user preferences. for the first problem, after i installed openser 1.3.2 with mySQL DB, i loaded the group model after connecting my openser to the PSTN. so i want to use the group model to permit the users for local, long distance and international calls. it work fine with me when i added the users using "openserctl acl add". but when i added the groups using serMyAdmin i get the folowing error message: *Message: could not insert: [UserGroup]; nested exception is org.hibernate.exception.ConstraintViolationException: could not insert: [UserGroup] Caused by: org.springframework.dao.DataIntegrityViolationException: could not insert: [UserGroup]; nested exception is org.hibernate.exception.ConstraintViolationException: could not insert: [UserGroup] Class: UserController At Line: [111] Code Snippet: org.codehaus.groovy.runtime.InvokerInvocationException: org.springframework.dao.DataIntegrityViolationException: could not insert: [UserGroup]; nested exception is org.hibernate.exception.ConstraintViolationException: could not insert: [UserGroup] at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630) at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436) at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374) at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.jsecurity.web.servlet.WebInterceptorFilter.doFilterInternal(WebInterceptorFilter.java:106) at org.jsecurity.web.servlet.SecurityContextFilter.doFilterInternal(SecurityContextFilter.java:93) at org.jsecurity.web.servlet.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:106) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Thread.java:619) Caused by: org.springframework.dao.DataIntegrityViolationException: could not insert: [UserGroup]; nested exception is org.hibernate.exception.ConstraintViolationException: could not insert: [UserGroup] at UserController$_closure6_closure11.doCall(UserController.groovy:111) at UserController$_closure6.doCall(UserController.groovy:101) at UserController$_closure6.doCall(UserController.groovy) ... 29 more Caused by: org.hibernate.exception.ConstraintViolationException: could not insert: [UserGroup] at $Proxy3.saveOrUpdate(Unknown Source) ... 32 more Caused by: com.mysql.jdbc.exceptions.jdbc4.MySQLIntegrityConstraintViolationException: Duplicate entry 'agentA-inrialpes.fr-' for key 2 at com.mysql.jdbc.Util.handleNewInstance(Util.java:406) at com.mysql.jdbc.Util.getInstance(Util.java:381) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:1015) at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:956) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3491) at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:3423) at com.mysql.jdbc.MysqlIO.sendCommand(MysqlIO.java:1936) at com.mysql.jdbc.MysqlIO.sqlQueryDirect(MysqlIO.java:2060) at com.mysql.jdbc.ConnectionImpl.execSQL(ConnectionImpl.java:2542) at com.mysql.jdbc.PreparedStatement.executeInternal(PreparedStatement.java:1734) at com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:2019) at com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:1937) at com.mysql.jdbc.PreparedStatement.executeUpdate(PreparedStatement.java:1922) at org.apache.tomcat.dbcp.dbcp.DelegatingPreparedStatement.executeUpdate(DelegatingPreparedStatement.java:102) ... 33 more* ========================================= the second problem is when adding a user references, basically i got a wrong attributes. specifically, the username is not stored in the database. see below the result *Username: agentA(a)inrialpes.fr Attribute: callfwd Value: sip:AgentB@inrialpes.fr <sip%3AAgentB(a)inrialpes.fr> Type: String:String Last Modified: 2008-07-07 17:45:02.0 *and in the MySQL database it is: +----+------+-------------+--------------+-----------+------+-------------------------+---------------------+---------+---------+ | id | uuid | username | domain | attribute | type | value | last_modified | version | user_id | +----+------+-------------+--------------+-----------+------+-------------------------+---------------------+---------+---------+ | 6 | 12 | 0 | inrialpes.fr | callfwd | 0 | sip:AgentB@inrialpes.fr <sip%3AAgentB(a)inrialpes.fr> | 2008-07-07 17:45:02 | 0 | 12 | +----+------+-------------+--------------+-----------+------+-------------------------+---------------------+---------+---------+ ========================================= does anyone faces thous problem? AHMED ALALI

1 0

[OpenSER-Users] Compiling / running Mediaproxy 2.0 on Debian Lenny
by jh＠tutpro.com 07 Jul '08

07 Jul '08

do you use gnutls 2.4.0? It seems that they renamed/ obseleted this function there [1]: gnutls_openpgp_crt_get_key_id: ADDED, obsoletes gnutls_openpgp_crt_get_id. dan, any chance to that you would update dispatcher to be compatible with gnutls 2.4.1? -- juha

1 0

[OpenSER-Users] Problem with multiple openser instances and attended transfers (REFER with replaces part)
by Ardjan Zwartjes 07 Jul '08

07 Jul '08

Hi all, I'm currently working on a VoIP system with multiple opensers as registrars, clients can register to whatever openser they like and use that one as an outgoing proxy. The configuration scripts makes sure that invites are branched to all other opensers so that the call is delivered wherever a client is registered. Basic call functionality is working fine, attended transfers however are a different story. If all the clients are registered on the same openser this works perfectly. Client A calls client B, client B calls client C, B sends a REFER to A with a replaces in the Refer-To header and A calls client C with a Replaces header in the INVITE. The INVITE from A to C here goes through the openser since all clients use the openser as a outgoing proxy and all is well. In the setup with multiple opensers however the problem arises. If client C is registered on a different openser then A and B the third call won't go through the registrar for C, the proxy for A and B will try to contact C directly since there is no route information in a REFER on how client C can be reached. If C is behind a firewall or the registrar for C knows specific (network) routes on how to contact C this scenario will fail since the INVITE from the openser for A and B directly to client C won't arrive. So my question is: Does anybody has any ideas on how to reach the desired goal: The INVITE from A to C should go through the openser for A and the openser for C. Personally I was thinking in the line of a reverse registration lookup to check if a contact is known on an openser and if it isn't I could branch it to all other openser systems, but I couldn't find a function that does this reverse lookup. I could try to implement this function myself, but I would prefer existing (tested ;)) functionality. Does anybody know a function that does this, or can anybody think of another solution for this problem? Thanks in advance. Kind regards, Ardjan Zwartjes.

1 0

[OpenSER-Users] Compiling / running Mediaproxy 2.0 on Debian Lenny
by Thomas Gelf 07 Jul '08

07 Jul '08

Hi list, I would like to give Mediaproxy 2.0 a try - it compiles fine on Debian Lenny (dpkg-buildpackage). However starting it results in "fatal error: failed to create MediaProxy Relay: /usr/lib/libgnutls-extra.so.26: undefined symbol: gnutls_openpgp_crt_get_id". Could anyone give me a little hint on how to resolve this issue? Named file /usr/lib/libgnutls-extra.so.26 is part of Lenny's libgnutls26, System is running semi-virtualized in a linux-vserver guest (64bit) - host system is running kernel 2.6.22.18. Kind regards, Thomas Gelf

2 1

[OpenSER-Users] using voipswitch as media server
by Tushar 07 Jul '08

07 Jul '08

Hi OPENSER community, I have recently started playing around with Openser, I am looking for a solution in which my Openser Server should carry the signalling part and my media stream should be handle by my voipswitch so I can monitor my RTP stream, work with my calling card solution. While browsing I came to know about mediaproxy rely and media server may be it help me to sent my RTP packet from my server but I like to use my voip switch for my media stream. Thanks, any input appreciated! Tushar Jain

4 7

[OpenSER-Users] Need Help on RLS.
by Mahesh Peddi 07 Jul '08

07 Jul '08

Hi Experts, I was working on open SER. And i need to test the RLS feature. I am approaching like this first i install openSER1.3.0 and then will deploy RLS rpm of which i got from the link http://fedora.nad.go.id/updates/8/i386/repodata/repoview/openser-rls-0-1.3.… . Could you suggest any other approach? Where i can get the working OpenSER and RLS? Thanks Regards, Mahesh Peddi

2 1

[OpenSER-Users] Nathelper tables
by Diego Costantini 07 Jul '08

07 Jul '08

Hi, I was following this sample configuration for a multihomed server: http://www.voip-info.org/wiki/index.php?page=SER+example+outboundproxy and it mentions: "For this example to work, you must also follow the nathelper module instructions for creating new location_internal and location_external tables. Be careful to use underscores ("_") and not hyphens ("-") when creating the new tables." But I couldn't find any instruction anywhere. Can someone address me to the correct place please? Thanks, Diego

1 0

[OpenSER-Users] how to add new module
by suresh tattikota 07 Jul '08

07 Jul '08

hi all please suggest me how to add new module to openser now i am using openser 1.2 please guide me how to procede ..... thank u in advance

2 1

[OpenSER-Users] presence module dialog handling
by Sigrid Thijs 07 Jul '08

07 Jul '08

Hi, we've configured OpenSER 1.3.0 on a FreeBSD server, together with OpenXCAP 0.9.9. When testing presence rules (RFC 5025) with our UA, we noticed the following behavior: - Subscription Handling is set to "block" in the presence rules: When a watcher subscribes for presence, it receives a NOTIFY with the Subscription-State set to "terminated;reason=rejected". This is as expected. When the presentity changes it's presence, the watcher doesn't receive any NOTIFY requests with the presence update (also OK). But, when the presentity changes the subscription handling to "allow" in the presence-rules document, the server sends an in-dialog NOTIFY request on the subscription dialog that was previously terminated. This is not ok. See the attached file presence_rules_01.txt. - Subscription Handling is set to "allow" in the presence rules: When the presentity changes the subscription handling to "block" in the presence-rules document, the server sends a NOTIFY with the Subscription-State set to "terminated;reason=timeout" to the watchers. When the presentity changes his presence, the presence server will still send NOTIFY requests to the watchers. See the attached file presence_rules_02.txt. kind regards, Sigrid 2008/04/14 12:10:11.167,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:10:11.167,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.167,trace,1352,sip,"SUBSCRIBE sip:test03@domain.com SIP/2.0" 2008/04/14 12:10:11.167,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.18:5061;rport;branch=z9hG4bK1123400681" 2008/04/14 12:10:11.167,trace,1352,sip,"From: <sip:test04@domain.com>;tag=619180932" 2008/04/14 12:10:11.167,trace,1352,sip,"To: <sip:test03@domain.com>" 2008/04/14 12:10:11.167,trace,1352,sip,"Call-ID: 171821901(a)172.17.10.18" 2008/04/14 12:10:11.167,trace,1352,sip,"CSeq: 1 SUBSCRIBE" 2008/04/14 12:10:11.167,trace,1352,sip,"Contact: <sip:test04@172.17.10.18:5061>" 2008/04/14 12:10:11.167,trace,1352,sip,"Max-Forwards: 70" 2008/04/14 12:10:11.167,trace,1352,sip,"User-Agent: Intellivic SDK/4.1.0.401" 2008/04/14 12:10:11.167,trace,1352,sip,"Expires: 3600" 2008/04/14 12:10:11.167,trace,1352,sip,"Event: presence" 2008/04/14 12:10:11.167,trace,1352,sip,"Accept: application/cpim-pidf+xml, application/pidf+xml, application/xpidf+xml" 2008/04/14 12:10:11.167,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:10:11.167,trace,1352,sip,"" 2008/04/14 12:10:11.167,trace,1352,sip,"" 2008/04/14 12:10:11.167,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.167,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:10:11.167,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.167,trace,2004,sip,"SIP/2.0 202 OK" 2008/04/14 12:10:11.167,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.18:5061;rport;branch=z9hG4bK1123400681" 2008/04/14 12:10:11.167,trace,2004,sip,"From: <sip:test04@domain.com>;tag=619180932" 2008/04/14 12:10:11.167,trace,2004,sip,"To: <sip:test03@domain.com>;tag=10.74166.1208167811.54" 2008/04/14 12:10:11.167,trace,2004,sip,"Call-ID: 171821901(a)172.17.10.18" 2008/04/14 12:10:11.167,trace,2004,sip,"CSeq: 1 SUBSCRIBE" 2008/04/14 12:10:11.167,trace,2004,sip,"Expires: 3600" 2008/04/14 12:10:11.167,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:10:11.167,trace,2004,sip,"Server: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:10:11.167,trace,2004,sip,"Content-Length: 0" 2008/04/14 12:10:11.167,trace,2004,sip,"" 2008/04/14 12:10:11.167,trace,2004,sip,"" 2008/04/14 12:10:11.167,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.167,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:10:11.167,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.167,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:10:11.167,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bKf06f.1f19a641.0" 2008/04/14 12:10:11.167,trace,2004,sip,"To: sip:test04@domain.com;tag=619180932" 2008/04/14 12:10:11.167,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208167811.54" 2008/04/14 12:10:11.167,trace,2004,sip,"CSeq: 1 NOTIFY" 2008/04/14 12:10:11.167,trace,2004,sip,"Call-ID: 171821901(a)172.17.10.18" 2008/04/14 12:10:11.177,trace,2004,sip,"Content-Length: 0" 2008/04/14 12:10:11.177,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:10:11.177,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:10:11.177,trace,2004,sip,"Event: presence" 2008/04/14 12:10:11.177,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:10:11.177,trace,2004,sip,"Subscription-State: terminated;reason=rejected" 2008/04/14 12:10:11.177,trace,2004,sip,"" 2008/04/14 12:10:11.177,trace,2004,sip,"" 2008/04/14 12:10:11.177,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.267,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:10:11.267,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:10:11.267,trace,1352,sip,"SIP/2.0 200 OK" 2008/04/14 12:10:11.267,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bKf06f.1f19a641.0" 2008/04/14 12:10:11.267,trace,1352,sip,"From: <sip:test03@domain.com>;tag=10.74166.1208167811.54" 2008/04/14 12:10:11.267,trace,1352,sip,"To: <sip:test04@domain.com>;tag=619180932" 2008/04/14 12:10:11.267,trace,1352,sip,"Call-ID: 171821901(a)172.17.10.18" 2008/04/14 12:10:11.267,trace,1352,sip,"CSeq: 1 NOTIFY" 2008/04/14 12:10:11.267,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:10:11.267,trace,1352,sip,"" 2008/04/14 12:10:11.267,trace,1352,sip,"" 2008/04/14 12:10:11.267,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:12:41.413,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:12:41.413,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:12:41.413,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:12:41.413,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bKc06f.00085e42.0" 2008/04/14 12:12:41.413,trace,2004,sip,"To: sip:test04@domain.com;tag=619180932" 2008/04/14 12:12:41.413,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208167811.54" 2008/04/14 12:12:41.413,trace,2004,sip,"CSeq: 2 NOTIFY" 2008/04/14 12:12:41.413,trace,2004,sip,"Call-ID: 171821901(a)172.17.10.18" 2008/04/14 12:12:41.413,trace,2004,sip,"Content-Length: 434" 2008/04/14 12:12:41.413,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:12:41.413,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:12:41.413,trace,2004,sip,"Event: presence" 2008/04/14 12:12:41.413,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:12:41.413,trace,2004,sip,"Subscription-State: active;expires=3450" 2008/04/14 12:12:41.413,trace,2004,sip,"Content-Type: application/pidf+xml" 2008/04/14 12:12:41.413,trace,2004,sip,"" 2008/04/14 12:12:41.413,trace,2004,sip,"<?xml version="1.0" encoding="UTF-8"?>" 2008/04/14 12:12:41.413,trace,2004,sip,"<presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:ep="urn:ietf:params:xml:ns:pidf:status:rpid-status" xmlns:et="urn:ietf:params:xml:ns:pidf:rpid-tuple" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" entity="sip:test03@domain.com"> " 2008/04/14 12:12:41.413,trace,2004,sip," <tuple id="2754173985">" 2008/04/14 12:12:41.413,trace,2004,sip," <status>" 2008/04/14 12:12:41.413,trace,2004,sip," <basic>open</basic>" 2008/04/14 12:12:41.413,trace,2004,sip," <ep:activity>permanent-absence</ep:activity>" 2008/04/14 12:12:41.413,trace,2004,sip," </status>" 2008/04/14 12:12:41.413,trace,2004,sip," </tuple>" 2008/04/14 12:12:41.413,trace,2004,sip,"</presence>" 2008/04/14 12:12:41.413,trace,2004,sip,"" 2008/04/14 12:12:41.413,trace,2004,sip,"----------------------------------------------------------------" ... 2008/04/14 12:42:55.271,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:42:55.271,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.271,trace,1352,sip,"SUBSCRIBE sip:test03@domain.com SIP/2.0" 2008/04/14 12:42:55.271,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.18:5061;rport;branch=z9hG4bK3796069995" 2008/04/14 12:42:55.271,trace,1352,sip,"From: <sip:test04@domain.com>;tag=823554229" 2008/04/14 12:42:55.271,trace,1352,sip,"To: <sip:test03@domain.com>" 2008/04/14 12:42:55.271,trace,1352,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:42:55.271,trace,1352,sip,"CSeq: 1 SUBSCRIBE" 2008/04/14 12:42:55.271,trace,1352,sip,"Contact: <sip:test04@172.17.10.18:5061>" 2008/04/14 12:42:55.271,trace,1352,sip,"Max-Forwards: 70" 2008/04/14 12:42:55.271,trace,1352,sip,"User-Agent: Intellivic SDK/4.1.0.401" 2008/04/14 12:42:55.271,trace,1352,sip,"Expires: 3600" 2008/04/14 12:42:55.271,trace,1352,sip,"Event: presence" 2008/04/14 12:42:55.271,trace,1352,sip,"Accept: application/cpim-pidf+xml, application/pidf+xml, application/xpidf+xml" 2008/04/14 12:42:55.271,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:42:55.271,trace,1352,sip,"" 2008/04/14 12:42:55.271,trace,1352,sip,"" 2008/04/14 12:42:55.271,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.301,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:42:55.301,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.301,trace,2004,sip,"SIP/2.0 202 OK" 2008/04/14 12:42:55.301,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.18:5061;rport;branch=z9hG4bK3796069995" 2008/04/14 12:42:55.301,trace,2004,sip,"From: <sip:test04@domain.com>;tag=823554229" 2008/04/14 12:42:55.301,trace,2004,sip,"To: <sip:test03@domain.com>;tag=10.74166.1208169775.67" 2008/04/14 12:42:55.301,trace,2004,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:42:55.301,trace,2004,sip,"CSeq: 1 SUBSCRIBE" 2008/04/14 12:42:55.301,trace,2004,sip,"Expires: 3600" 2008/04/14 12:42:55.301,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:42:55.301,trace,2004,sip,"Server: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:42:55.301,trace,2004,sip,"Content-Length: 0" 2008/04/14 12:42:55.301,trace,2004,sip,"" 2008/04/14 12:42:55.301,trace,2004,sip,"" 2008/04/14 12:42:55.301,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.301,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:42:55.301,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.301,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:42:55.301,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK5f77.0e99e1a5.0" 2008/04/14 12:42:55.301,trace,2004,sip,"To: sip:test04@domain.com;tag=823554229" 2008/04/14 12:42:55.301,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208169775.67" 2008/04/14 12:42:55.301,trace,2004,sip,"CSeq: 1 NOTIFY" 2008/04/14 12:42:55.301,trace,2004,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:42:55.301,trace,2004,sip,"Content-Length: 383" 2008/04/14 12:42:55.301,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:42:55.301,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:42:55.301,trace,2004,sip,"Event: presence" 2008/04/14 12:42:55.301,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:42:55.301,trace,2004,sip,"Subscription-State: active;expires=3600" 2008/04/14 12:42:55.301,trace,2004,sip,"Content-Type: application/pidf+xml" 2008/04/14 12:42:55.301,trace,2004,sip,"" 2008/04/14 12:42:55.301,trace,2004,sip,"<?xml version="1.0" encoding="UTF-8"?>" 2008/04/14 12:42:55.301,trace,2004,sip,"<presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:ep="urn:ietf:params:xml:ns:pidf:status:rpid-status" xmlns:et="urn:ietf:params:xml:ns:pidf:rpid-tuple" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" entity="sip:test03@domain.com"> " 2008/04/14 12:42:55.301,trace,2004,sip," <tuple id="2754173985">" 2008/04/14 12:42:55.301,trace,2004,sip," <status>" 2008/04/14 12:42:55.301,trace,2004,sip," <basic>open</basic>" 2008/04/14 12:42:55.301,trace,2004,sip," </status>" 2008/04/14 12:42:55.301,trace,2004,sip," </tuple>" 2008/04/14 12:42:55.301,trace,2004,sip,"</presence>" 2008/04/14 12:42:55.301,trace,2004,sip,"" 2008/04/14 12:42:55.301,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.441,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:42:55.441,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:42:55.441,trace,1352,sip,"SIP/2.0 200 OK" 2008/04/14 12:42:55.441,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK5f77.0e99e1a5.0" 2008/04/14 12:42:55.441,trace,1352,sip,"From: <sip:test03@domain.com>;tag=10.74166.1208169775.67" 2008/04/14 12:42:55.441,trace,1352,sip,"To: <sip:test04@domain.com>;tag=823554229" 2008/04/14 12:42:55.441,trace,1352,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:42:55.441,trace,1352,sip,"CSeq: 1 NOTIFY" 2008/04/14 12:42:55.441,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:42:55.441,trace,1352,sip,"" 2008/04/14 12:42:55.441,trace,1352,sip,"" 2008/04/14 12:42:55.441,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:43:12.285,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:43:12.285,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:43:12.285,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:43:12.285,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK2f77.31f65dd6.0" 2008/04/14 12:43:12.285,trace,2004,sip,"To: sip:test04@domain.com;tag=823554229" 2008/04/14 12:43:12.285,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208169775.67" 2008/04/14 12:43:12.285,trace,2004,sip,"CSeq: 2 NOTIFY" 2008/04/14 12:43:12.285,trace,2004,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:43:12.285,trace,2004,sip,"Content-Length: 421" 2008/04/14 12:43:12.285,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:43:12.285,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:43:12.285,trace,2004,sip,"Event: presence" 2008/04/14 12:43:12.285,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:43:12.285,trace,2004,sip,"Subscription-State: active;expires=3583" 2008/04/14 12:43:12.285,trace,2004,sip,"Content-Type: application/pidf+xml" 2008/04/14 12:43:12.285,trace,2004,sip,"" 2008/04/14 12:43:12.285,trace,2004,sip,"<?xml version="1.0" encoding="UTF-8"?>" 2008/04/14 12:43:12.285,trace,2004,sip,"<presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:ep="urn:ietf:params:xml:ns:pidf:status:rpid-status" xmlns:et="urn:ietf:params:xml:ns:pidf:rpid-tuple" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" entity="sip:test03@domain.com"> " 2008/04/14 12:43:12.285,trace,2004,sip," <tuple id="2754173985">" 2008/04/14 12:43:12.285,trace,2004,sip," <status>" 2008/04/14 12:43:12.285,trace,2004,sip," <basic>open</basic>" 2008/04/14 12:43:12.285,trace,2004,sip," <ep:activity>meal</ep:activity>" 2008/04/14 12:43:12.285,trace,2004,sip," </status>" 2008/04/14 12:43:12.285,trace,2004,sip," </tuple>" 2008/04/14 12:43:12.285,trace,2004,sip,"</presence>" 2008/04/14 12:43:12.285,trace,2004,sip,"" 2008/04/14 12:43:12.285,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:43:12.315,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:43:12.315,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:43:12.305,trace,1352,sip,"SIP/2.0 200 OK" 2008/04/14 12:43:12.305,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK0a3.8cb82654.0" 2008/04/14 12:43:12.305,trace,1352,sip,"From: <sip:test03@domain.com>;tag=10.74167.1208169449.68" 2008/04/14 12:43:12.305,trace,1352,sip,"To: <sip:test04@domain.com>;tag=2701925734" 2008/04/14 12:43:12.305,trace,1352,sip,"Call-ID: 891393650(a)172.17.10.18" 2008/04/14 12:43:12.305,trace,1352,sip,"CSeq: 4 NOTIFY" 2008/04/14 12:43:12.305,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:43:12.315,trace,1352,sip,"" 2008/04/14 12:43:12.315,trace,1352,sip,"" 2008/04/14 12:43:12.315,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:44:10.840,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:44:10.840,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:44:10.840,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:44:10.840,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK3f77.ab08f675.0" 2008/04/14 12:44:10.840,trace,2004,sip,"To: sip:test04@domain.com;tag=823554229" 2008/04/14 12:44:10.840,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208169775.67" 2008/04/14 12:44:10.840,trace,2004,sip,"CSeq: 3 NOTIFY" 2008/04/14 12:44:10.840,trace,2004,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:44:10.840,trace,2004,sip,"Content-Length: 0" 2008/04/14 12:44:10.840,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:44:10.840,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:44:10.840,trace,2004,sip,"Event: presence" 2008/04/14 12:44:10.840,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:44:10.840,trace,2004,sip,"Subscription-State: terminated;reason=timeout" 2008/04/14 12:44:10.840,trace,2004,sip,"" 2008/04/14 12:44:10.840,trace,2004,sip,"" 2008/04/14 12:44:10.840,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:44:10.900,trace,1352,sip,"sending message to 172.17.10.53:5060" 2008/04/14 12:44:10.900,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:44:10.900,trace,1352,sip,"SIP/2.0 200 OK" 2008/04/14 12:44:10.900,trace,1352,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK3f77.ab08f675.0" 2008/04/14 12:44:10.900,trace,1352,sip,"From: <sip:test03@domain.com>;tag=10.74166.1208169775.67" 2008/04/14 12:44:10.900,trace,1352,sip,"To: <sip:test04@domain.com>;tag=823554229" 2008/04/14 12:44:10.900,trace,1352,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:44:10.900,trace,1352,sip,"CSeq: 3 NOTIFY" 2008/04/14 12:44:10.900,trace,1352,sip,"Content-Length: 0" 2008/04/14 12:44:10.900,trace,1352,sip,"" 2008/04/14 12:44:10.900,trace,1352,sip,"" 2008/04/14 12:44:10.900,trace,1352,sip,"----------------------------------------------------------------" 2008/04/14 12:45:06.470,trace,2004,sip,"received message from 172.17.10.53:5060" 2008/04/14 12:45:06.470,trace,2004,sip,"----------------------------------------------------------------" 2008/04/14 12:45:06.470,trace,2004,sip,"NOTIFY sip:test04@172.17.10.18:5061 SIP/2.0" 2008/04/14 12:45:06.470,trace,2004,sip,"Via: SIP/2.0/UDP 172.17.10.53:5060;branch=z9hG4bK2f77.41f65dd6.0" 2008/04/14 12:45:06.470,trace,2004,sip,"To: sip:test04@domain.com;tag=823554229" 2008/04/14 12:45:06.470,trace,2004,sip,"From: sip:test03@domain.com;tag=10.74166.1208169775.67" 2008/04/14 12:45:06.470,trace,2004,sip,"CSeq: 2 NOTIFY" 2008/04/14 12:45:06.470,trace,2004,sip,"Call-ID: 2865051670(a)172.17.10.18" 2008/04/14 12:45:06.470,trace,2004,sip,"Content-Length: 383" 2008/04/14 12:45:06.470,trace,2004,sip,"User-Agent: OpenSER (1.3.0-tls (i386/freebsd))" 2008/04/14 12:45:06.470,trace,2004,sip,"Max-Forwards: 70" 2008/04/14 12:45:06.470,trace,2004,sip,"Event: presence" 2008/04/14 12:45:06.470,trace,2004,sip,"Contact: <sip:172.17.10.53:5060>" 2008/04/14 12:45:06.470,trace,2004,sip,"Subscription-State: active;expires=3469" 2008/04/14 12:45:06.470,trace,2004,sip,"Content-Type: application/pidf+xml" 2008/04/14 12:45:06.470,trace,2004,sip,"" 2008/04/14 12:45:06.470,trace,2004,sip,"<?xml version="1.0" encoding="UTF-8"?>" 2008/04/14 12:45:06.470,trace,2004,sip,"<presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:ep="urn:ietf:params:xml:ns:pidf:status:rpid-status" xmlns:et="urn:ietf:params:xml:ns:pidf:rpid-tuple" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" entity="sip:test03@domain.com"> " 2008/04/14 12:45:06.470,trace,2004,sip," <tuple id="2754173985">" 2008/04/14 12:45:06.470,trace,2004,sip," <status>" 2008/04/14 12:45:06.470,trace,2004,sip," <basic>open</basic>" 2008/04/14 12:45:06.470,trace,2004,sip," </status>" 2008/04/14 12:45:06.470,trace,2004,sip," </tuple>" 2008/04/14 12:45:06.470,trace,2004,sip,"</presence>" 2008/04/14 12:45:06.470,trace,2004,sip,"" 2008/04/14 12:45:06.470,trace,2004,sip,"----------------------------------------------------------------" ...

2 15

[OpenSER-Users] MySQL Error message
by Yazid Hadj Said 07 Jul '08

07 Jul '08

Hi, I work with 1.3.1 version and when I perform MySQL Instructions with avp_db_query, I have this error mesage: Jul 7 09:20:36 [19247] ERROR:mysql:db_mysql_submit_query: driver error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'condition from rules' at line 1 Jul 7 09:20:36 [19247] ERROR:mysql:db_mysql_raw_query: error while submitting query Jul 7 09:20:36 [19247] ERROR:avpops:db_query_avp: cannot do the query But I have not mistake in my SQL syntax, Is It a bug? Regards Yazid

2 2

[OpenSER-Users] regarding presence connectivity with HSS.
by srinivasa.reddy＠info-spectrum.com 07 Jul '08

07 Jul '08

Hi All, I am new to Openser , implemented as presence server by loading presence module . This is installed on the same machine where HSS and SER_IMS are running. My doubt is how I can conform connectivity between HSS and Presence module. Please can anybody respond to this? regards SRINIVAS.

2 1

[OpenSER-Users] regarding openser applications
by srinivasa.reddy＠info-spectrum.com 07 Jul '08

07 Jul '08

HI ALL, I HAVE ONE DOUBT ,IS IT POSSIBLE TO IMPLIMENT TWO APLICATIONS AT A TIME ON OPENSER. I mean at a time two applications can we run as a presence server and Presnce user Agent. With Best Regards, Srinivasa.

2 1

[OpenSER-Users] Openser1.3.1 performance figures
by Sundaramoorthy, Vijaianand 07 Jul '08

07 Jul '08

Hello, We are trying to benchmark openser1.3.1 - installed in a 2cpu-dual core(Intel(R) Xeon(R) CPU 5110 @ 1.60GHz),hp c-class blade, with 2GBRAM. OS:RHEL4U5. We have configured openser with mysql database as registerer. We are using IMS Bench(IMS SIPp),to generate SIPp traffic - combination of registration/re registration/de-registration/call flow(uac)/scenarios. It looks like, the when the calls per second is increased 150/200 CPS, calls started failing. Is this is normal acceptable performance figures for openser for the above configuration? we record route all the SIP requests (except for REGISTER,MESSAGE ) and we do have mysql database for authenticating registration requests. Attached, the openser.cfg Also attached the Error logs from SIPP. Anyone have some clues/hints? Thanks for your help, Regards, VJ

4 3

[OpenSER-Users] Openser did not respond
by Andhika Gannesha Gemilang 07 Jul '08

07 Jul '08

Hi, I can't connect to my server using SIP phone (Xlite on windows). i trace sip packets using #tcpdump port 5060 and i got this : tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 12:11:54.458829 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:11:58.520903 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:02.583054 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:06.645089 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 i guess i got no problem on my SIP phone, it's just my server that didn't respond to the sip request. Here's my server status : #openserctl moni [cycle #: 1072; if constant make sure server lives] Server:: OpenSER (1.3.0-notls (i386/linux)) Now:: Thu Jul 3 12:46:03 2008 Up since:: Thu Jul 3 12:09:29 2008 Up time:: 2194 [sec] Transaction Statistics: tm:UAS_transactions = 0 tm:UAC_transactions = 0 tm:inuse_transactions = 0 Stateless Server Statistics: sl:sent_replies = 0 sl:sent_err_replies = 0 sl:received_ACKs = 0 UsrLoc Stats: usrloc:registered_users = 0 usrloc:location-users = 0 usrloc:location-contacts = 0 usrloc:location-expires = 0 any suggestion would make my life easier.... thanks

2 1

[OpenSER-Users] Need Help..
by Marcio 07 Jul '08

07 Jul '08

Hi, Anyone would know?......how i can through of the perl(module perl v1.3) connect to database Mysql to execute DML's commands SQL...? Examples are welcome.. best regards, Marcio

2 1

[Serusers] iptel.org: where do you go: SLAMP and "SIP Akamai"
by Jiri Kuthan 06 Jul '08

06 Jul '08

Hello all, I wanted to share with everyone else my opinion on where SER and/or iptel.org is going, and ask folks for opinion and testing the new features mentioned bellow. Shortly I think the key goals on the software side are SLAMP bundling, security and performance. On the operational side, the technology is getting to a place which I like to call "akamai of sip" ... world-wide distributed reliable SIP network. - BUNDLING. I'm a strong believer in SLAMP ... SER/SEMS/SERWEB -- Linux -- Apache -- Mysql -- Perl/Python/PHP. It is the software mesh-up that actually allows to build a variety of web applicatons. We now have SIPSAK, SERWEB and SEMS well synchronized and working with each other. SER has advanced on the packaging side to provide out-of-the-box experience: we have a very complete configuration file (OOB) dealing with most common real-word scenarios, we have all-in-one packaging that puts all the pieces in a single box. (see bellow for more). - SECURITY: Enormous attention has been paid to it. Actually I have contracted a security review, TCP code known to be easily vulnerable to blocking attacks has been made more robust, and SER now implements predictive nonces to deal with replay attacks mounted on digest authentication. Support for Identity (see bellow and RFC4474) has been extensively tested in Sipits. In fact, I consider lack of Internet-wide notion of identity one of the greatest hassles in the Internet and this is our modest contribution to address that. - PERFORMANCE. This can be never appreciated enough. While SER can easily serve quite large populations on commodity hardware, the real challenge is in fact dealing with abnormalities. This includew boot avalanches of SIP telephones, misconfigurations, unsolicited traffic, simply all the things you never wish to happen. Still they do. Currently the bottleneck turned out to be database, which has been greatly improved. It is worthwile mentioned we eat our own dog's food ... the public iptel.org service is powered by SLAMP. I'm working with my collegues on advance concepts that allow to deal with massive geographic dispersion (akamai-like experience), routing, etc. See bellow for more. OOB ----- * Features First -- OOB, which stands for out-of-the-box, and is a very exhaustive configuration of SER (we might have called it all-you-can-eat) , dealing with most of common features/problems: - NAT traversal - basic call services (variants of call forwarding, speed-dial) - multidomain hosting - gateway routing and gateway protection * Requirements OOB is available for SER 2.0 and higher, as it leverages some of the key SER features coming up with this thoroughly overhauled version. There is also OOB debian package for it -- not that it only includes SER without supporting packages such as mysql and rtp proxy. * Roadmap - even more security (rate-limit, identity, permissions) Most important to me appears Identity support. Given that lack of some credible notion of identity is causing a lot of mess, I think it is time to begin using verifiable identity with SIP. SER supports Identity (RFC4474) since quite a while and has been tested in sipits for it. Also on the security page, I think the famous module rate-limit shall appear in OOB rather soon than late. * Source: http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/ser-oob.cfg?re… ai1 ---- * Features All-in-one is an attempt to bring all related packages on a single box using a simple installation procedure. The metapackage includes SER, SEMS, SERWEB, SER_CTL. It is in its very early stage, so please help by testing it. * Requirements debian. There is currently no other system supported. * To use it: - put the iptel.org debian package repository in your source.list: deb http://ftp.iptel.org/debian etch main cvs - update package list and repositories: apt-get update; apt-get upgrade - set appropriate reconfiguration level to *medium* dpkg-reconfigure - install ai1 apt-get install ai1 * Known limitations It is really just finished and only little tested. Please help testing and collecting the initial experience. Other semi-news --------------- While there are interesting periodic Talmudic discussion when 2.0 shall be labeled as "released", there is lot of good work going on with SER 2.1 (the "HEAD version"). Let me make a "sales pitch" for at least some parts of it which have so far made it to CVS. A very important change is the DB-API overhaul. For those of you who are running deployments which are a bit "dense", it is certainly no secret that database matters. In fact, it it not unusual to have about seven database transactions for a single SIP invite transaction. Thus database has a huge impact on performance, and if database is for whatever reason lame, so will be soon everything else. A large portion of all major failures I have witnessed were someway related to databases. The DB-API performs very well and is ready to be used with real-time databases. Also a new LDAP module has been contributed (single DB driver for all modules, not like at this moment yet radius-based modules for different functionalities). It is also important to realize that well-done database engine is the key instrument for integrating applications (or if you wish to use this horrible buzzword, databases are great *middleware*.) The thing is that in reality it is mysql and other noble databases that connect applications (such as SER) with web-front-ends (such as SERWEB), CLIs (such as SERCTL) and any other thinkable applications. Personally I think that middleware technologies such as "corba" have actually not achieved such an impact as good open databases did -- long live SLAMP. On the "aplication-mash-up side", another step is going to be single-sign-on. I believe this will be very useful in integrating SIP, and serweb with other applications, such as address books. Our esteemed serweb author is working on it hard right now. New configuration framework is extremelly useful thing -- now many things can be easily managed in SER in real-time without the need to restart the server. http://sip-router.org/browser/ser/doc/cfg.txt?rev=6627%3A746a56c7a1f4 An extremely long list of useful features and fixes have appeared on CVS, be blessed all who have contributed to keeping SER a well-oiled machine by adding all these laborious changes. I apologize to all the authors for not mentioning all the important contributions, this email just began to be more lengthy than I hoped for. http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/NEWS?rev=HEAD&cont… Also as you know, there is a SER book, alas only in German now: http://www.amazon.de/Internet-Telefonie-VoIP-mit-Asterisk-SER/dp/3937514163 iptel.org setup ---------------- I think the iptel.org running SIP service deserves some extra attention. In the future I actually plan to "fork" a new mainling list, so that folks can better separate debates related to the software and to the running service. In the heart of the service, there is SER running (CVS/HEAD version). With SER, we have many useful features: - have-my-domain ... folks can claim, administer and run their own domains - BETA: Akamai-like services for selected hosted domains. Briefly, it allows subscribers to be served by a server close to them. Particularly beneficial for media relay. - media services: 1000(a)iptel.org ... voicemail, 000777 prefix ... conference bridge; there is also zRTP-secured confidential conferencing service - subscriber provisioning (domain owners can largely manipulate structure user profiles) - multiple identities (00 prefix) allows you to terminate SIP calls using alternate accounts preconfigured in user profile - monitoring (administrator tool which is essential to keep the service healthy) - massive routing administrator provisioning Of course not all of it is achieved using SER alone -- that's where the SLAMP concept comes in. Media services are powered by SEMS, Web-provisioning is achieved using SERWEB. Even proprietary components fit in very well, such as the monitoring box (palladion), load-balancer and one private SER extension (the massive route provisioning). notes to openser users ---------------------- stay tuned. whereas all the development mentioned here relates to SER, I'm confident they will make their way to openser as well. We had recently a very open (:-)) meeting with openser advocate, Henning W. and there was quite lot of good will to exchange. See http://openser.org/pipermail/devel/2008-June/013880.html

3 4

[OpenSER-Users] Handle 302 Moved Temporarily
by Dmitry Lyubimkov 05 Jul '08

05 Jul '08

We need process 302 redirection Message in our OpenSER (ver 1.3) script. we use failure_route failure_route[1] { append_hf("Transfer-code: $T_reply_code\r\n"); if t_check_status("(302)|(301)"){ append_hf("Original-URI: $ru\r\n"); get_redirects("*"); rewritehostport("172.16.2.6"); # append_branch(); route(1); } else if t_check_status("(408)|(486)"){ rewritehostport("172.16.2.6"); append_branch(); route(1); }; } All fails with 4xx code (Timeout, Busy) work right. OpenSER send them to asterisk (172.16.2.6). But we cannot do the same with 301 and 302 code, because there is a header Contact in their replies. And we need to change our URI according this field. Using Tcpdump I get some diagnostic: Invite to UA: 18:48:31.898163 IP 78.36.60.131.sip > 172.16.76.4.53568: SIP, length: 1258 E.....@.@...N$<...L....@....INVITE sip:loft@172.16.76.4:53568;rinstance=87e2d8d91648c3bf SIP/2.0 Record-Route: <sip:78.36.60.131;lr;ftag=2D551EE4-2538;nat=yes> Via: SIP/2.0/UDP voapp.ru:5060;branch=z9hG4bK8b81.6f656603.0 Via: SIP/2.0/UDP 78.36.60.129:5060;rport=52061;x-route-tag="tgrp:m200" From: <sip:78142722856@78.36.60.129>;tag=2D551EE4-2538 To: <sip:78142599298@78.36.60.131> Date: Fri, 04 Jul 2008 14:39:48 GMT Call-ID: E338E8F0-490D11DD-834CC831-1B0A3D9F(a)78.36.60.129 Supported: timer,100rel Min-SE: 1800 Cisco-Guid: 3812117704-1225593309-2202650673-453655967 User-Agent: Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO CSeq: 101 INVITE Max-Forwards: 5 Timestamp: 1215182388 Contact: <sip:78142722856@78.36.60.129:5060> Expires: 180 Allow-Events: telephone-event Content-Type: application/sdp Content-Length: 375 Reply witn 302 code: 18:48:32.019255 IP 172.16.76.4.53568 > 78.36.60.131.sip: SIP, length: 474 E...\...}.]+..L.N$<..@.... .SIP/2.0 302 Moved Temporarily Via: SIP/2.0/UDP voapp.ru:5060;branch=z9hG4bK8b81.6f656603.0;received=78.36.60.131 Via: SIP/2.0/UDP 78.36.60.129:5060;rport=52061;x-route-tag="tgrp:m200" Contact: <sip:78142705353@voapp.ru> To: <sip:78142599298@78.36.60.131>;tag=e3040a33 From: <sip:78142722856@78.36.60.129>;tag=2D551EE4-2538 Call-ID: E338E8F0-490D11DD-834CC831-1B0A3D9F(a)78.36.60.129 CSeq: 101 INVITE User-Agent: X-Lite release 1011s stamp 41150 Content-Length: 0 Our acknoledgement: 18:48:32.019395 IP 78.36.60.131.sip > 172.16.76.4.53568: SIP, length: 395 E.....@.@..yN$<...L....@...`ACK sip:loft@172.16.76.4:53568;rinstance=87e2d8d91648c3bf SIP/2.0 Via: SIP/2.0/UDP voapp.ru:5060;branch=z9hG4bK8b81.6f656603.0 From: <sip:78142722856@78.36.60.129>;tag=2D551EE4-2538 Call-ID: E338E8F0-490D11DD-834CC831-1B0A3D9F(a)78.36.60.129 To: <sip:78142599298@78.36.60.131>;tag=e3040a33 CSeq: 101 ACK Max-Forwards: 70 User-Agent: OpenSER (1.3.1-notls (i386/linux)) Content-Length: 0 And new Invite: 18:48:32.019762 IP 78.36.60.131.sip > 172.16.76.4.53568: SIP, length: 1327 E..K..@.@...N$<...L....@.7..INVITE sip:78142705353@172.16.76.4:53568 SIP/2.0 Record-Route: <sip:78.36.60.131;lr;ftag=2D551EE4-2538;nat=yes> Via: SIP/2.0/UDP voapp.ru:5060;branch=z9hG4bK8b81.6f656603.1 Via: SIP/2.0/UDP 78.36.60.129:5060;rport=52061;x-route-tag="tgrp:m200" From: <sip:78142722856@78.36.60.129>;tag=2D551EE4-2538 To: <sip:78142599298@78.36.60.131> Date: Fri, 04 Jul 2008 14:39:48 GMT Call-ID: E338E8F0-490D11DD-834CC831-1B0A3D9F(a)78.36.60.129 Supported: timer,100rel Min-SE: 1800 Cisco-Guid: 3812117704-1225593309-2202650673-453655967 User-Agent: Cisco-SIPGateway/IOS-12.x Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO CSeq: 101 INVITE Max-Forwards: 5 Timestamp: 1215182388 Contact: <sip:78142722856@78.36.60.129:5060> Expires: 180 Allow-Events: telephone-event Content-Type: application/sdp Content-Length: 375 Transfer-code: 302 Original-URI: sip:loft@172.16.76.4:53568;rinstance=87e2d8d91648c3bf But why sip:78142705353@172.16.76.4:53568? Why not 172.16.2.6 (rewritehostport("172.16.2.6");) or sip:78142705353@voapp.ru (Contact: <sip:78142705353@voapp.ru>)? Where is error? I need to sent all 3xx redirects to dedicated server but I also need to get Contact header from UA reply and put it in outgoung message. What commands must I use? Can anybody help me and get fragment of openser script? Thx Dmitry

2 1

[OpenSER-Users] How to cancel a branch
by Zappasodi Daniele 05 Jul '08

05 Jul '08

Hello, I need something similar to the t_uac_cancel fifo command, but when there are more branches (parallel forking) it should offer the opportunity to select the branch to cancel. Is there a way (with openser.cfg or with a fifo command or a with a tm exported api or ...) to choose the branches to cancel? regards Daniele ********************************************************************** The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message inerror. **********************************************************************

2 1

[OpenSER-Users] Help please: OpenSer as RLS.
by Noble Antony T 04 Jul '08

04 Jul '08

Hi, I have compiled the Openser with RLS module in my desktop, and it seems installation went fine... But when I try to start the openser, I am getting the following error..... * Jul 3 10:11:49 [10721] ERROR:core:table_version: invalid type (2) or nul (0) version columns for xcap Jul 3 10:11:49 [10721] DBG:core:db_free_rows: freeing 1 rows Jul 3 10:11:49 [10721] DBG:core:db_free_rows: row[0]=0x815d530 Jul 3 10:11:49 [10721] DBG:core:db_free_rows: 0x815d530=pkg_free() RES_ROWS Jul 3 10:11:49 [10721] ERROR:presence_xml:mod_init: Wrong version v-1 for table <xcap>, need v3 Jul 3 10:11:49 [10721] ERROR:core:init_mod: failed to initialize module presence_xml Jul 3 10:11:49 [10721] ERROR:core:main: error while initializing modules Jul 3 10:11:49 [10721] DBG:rls:destroy: start* But my MySQL shows, the version of XCAP as *mysql> select * from version where table_name="xcap" ; +------------+---------------+ | table_name | table_version | +------------+---------------+ | xcap | 3 | +------------+---------------+ 1 row in set (0.00 sec) mysql> * Though the version information is present for the xcap table, this error is coming. I have created the database using the following * stinbng46:/home/nthattil/tmp/src_openser_install# /usr/local/sbin/openserdbctl /usr/local/sbin/openserdbctl $Revision: 3540 $ usage: openserdbctl create <db name or db_path, optional> .....(creates a new database) openserdbctl drop <db name or db_path, optional> .......(!entirely deletes tables!) openserdbctl reinit <db name or db_path, optional> .....(!entirely deletes and than re-creates tables!) openserdbctl backup <file> .................................(dumps current database to file) openserdbctl restore <file> ................................(restores tables from a file) openserdbctl copy <new_db> .................................(creates a new db from an existing one) openserdbctl migrate <old_db> <new_db> .....................(migrates DB from 1.2 to 1.3, not implemented yet!) openserdbctl presence ......................................(adds the presence related tables) openserdbctl extra .........................................(adds the extra tables) openserdbctl serweb ........................................(adds the SERWEB specific tables) * The Version of Openser I used is *stinbng46:/home/nthattil/tmp/src_openser_install# /usr/local/sbin/openser -V version: openser 1.3.2-notls (i386/linux) flags: STATS: Off, EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 3590 2008-01-28 17:46:56Z bogdan_iancu $ main.c compiled on 03:33:43 Jul 3 2008 with gcc 4.2.3 *I downloaded the entire source-code from the location below * http://www.openser.org/pub/openser/latest/src/openser-1.3.2-notls_src.tar.gz * I wanted to use the integrated XCAP server, which will use the mysql database for itself, instead of HTTP protocol. My Configuration file, I am including along with this mail... also the Openser Log file.... *Somebody please help me....... *Please point out, if something I am missing to configure..... -- Thanks & Regards, Noble Antony Thattil.

2 5

[OpenSER-Users] Need Help: OpenSer as RLS.
by Noble Antony T 04 Jul '08

04 Jul '08

Hi, I have compiled the Openser with RLS module in my desktop, and it seems installation went fine... But when I try to start the openser, I am getting the following error..... * Jul 3 10:11:49 [10721] ERROR:core:table_version: invalid type (2) or nul (0) version columns for xcap Jul 3 10:11:49 [10721] DBG:core:db_free_rows: freeing 1 rows Jul 3 10:11:49 [10721] DBG:core:db_free_rows: row[0]=0x815d530 Jul 3 10:11:49 [10721] DBG:core:db_free_rows: 0x815d530=pkg_free() RES_ROWS Jul 3 10:11:49 [10721] ERROR:presence_xml:mod_init: Wrong version v-1 for table <xcap>, need v3 Jul 3 10:11:49 [10721] ERROR:core:init_mod: failed to initialize module presence_xml Jul 3 10:11:49 [10721] ERROR:core:main: error while initializing modules Jul 3 10:11:49 [10721] DBG:rls:destroy: start* But my MySQL shows, the version of XCAP as *mysql> select * from version where table_name="xcap" ; +------------+---------------+ | table_name | table_version | +------------+---------------+ | xcap | 3 | +------------+---------------+ 1 row in set (0.00 sec) mysql> * Though the version information is present for the xcap table, this error is coming. I have created the database using the following * stinbng46:/home/nthattil/tmp/src_openser_install# /usr/local/sbin/openserdbctl /usr/local/sbin/openserdbctl $Revision: 3540 $ usage: openserdbctl create <db name or db_path, optional> .....(creates a new database) openserdbctl drop <db name or db_path, optional> .......(!entirely deletes tables!) openserdbctl reinit <db name or db_path, optional> .....(!entirely deletes and than re-creates tables!) openserdbctl backup <file> .................................(dumps current database to file) openserdbctl restore <file> ................................(restores tables from a file) openserdbctl copy <new_db> .................................(creates a new db from an existing one) openserdbctl migrate <old_db> <new_db> .....................(migrates DB from 1.2 to 1.3, not implemented yet!) openserdbctl presence ......................................(adds the presence related tables) openserdbctl extra .........................................(adds the extra tables) openserdbctl serweb ........................................(adds the SERWEB specific tables) * The Version of Openser I used is *stinbng46:/home/nthattil/tmp/src_openser_install# /usr/local/sbin/openser -V version: openser 1.3.2-notls (i386/linux) flags: STATS: Off, EXTRA_DEBUG, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. svnrevision: unknown @(#) $Id: main.c 3590 2008-01-28 17:46:56Z bogdan_iancu $ main.c compiled on 03:33:43 Jul 3 2008 with gcc 4.2.3 *I downloaded the entire source-code from the location below * http://www.openser.org/pub/openser/latest/src/openser-1.3.2-notls_src.tar.gz * I wanted to use the integrated XCAP server, which will use the mysql database for itself, instead of HTTP protocol. My Configuration file, I am including along with this mail... also the Openser Log file.... *Somebody please help me....... *Please point out, if something I am missing to configure..... -- Thanks & Regards, Noble Antony Thattil.

1 0

[OpenSER-Users] Load Balancing
by Guilherme Loch Waltrick Góes 03 Jul '08

03 Jul '08

What's the best way of doing OpenSER load balancing and failover ? I'm trying to do a DNS Round Robin with two OpenSER 1.3.2 but sometimes when a user registered on server1 tries to call a user at server2 the call is not completed. In this scenario I have a common MySQL cluster serving both OpenSER servers. Any help ? Best Regards, -- Guilherme Loch Góes Visite nossa loja virtual: http://www.shopvoip.com.br Notícias e Fórum sobre VoIP com software livre: http://www.asteriskexperts.com.br

2 1

[Serusers] reply to port 5060
by David Lubarski 03 Jul '08

03 Jul '08

Hi, I have a problem using SER, i have a client behind CheckPoint FW, when the client tries to register, SER receives the SIP REGISTER message and SER reply to the source IP and source PORT, but because the client is behind CheckPoint FW if the source port is not 5060 the FW blocks it, so i need SER to reply not to the source port of the client but to port 5060. i'll attach ngrep on the SER server: client sends REGISTER to the SER server at 192.168.0.161:5060. U 2008/06/12 21:36:01.654005 10.6.67.10:31472 -> 192.168.0.161:5060 REGISTER sip:213.8.57.218 SIP/2.0..Via: SIP/2.0/UDP 10.6.67.10:31472;branch=z9hG4bK-d87543-de5ac063e 9293020-1--d87543-;rport..Max-Forwards: 70..Contact: <sip:200@10.6.67.10:31472;rinstance=82602d40693 d48a6>;expires=0..To: "test1"<sip:200@213.8.57.218>..From: "test1"<sip:200@213.8.57.218>;tag=5c6b793 a..Call-ID: NmI4MTUyMWY5MTEwYTI3ZjY2ZTE2ZTMzNzk5ZGFmZWI...CSeq: 5 REGISTER..Allow: INVITE, ACK, CANC EL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1011s stamp 41 150..Authorization: Digest username="200",realm="localhost",nonce="48516daafb5a3406078621 <http://www.snapanumber.com/>9a55fdb4908 9064386",uri="sip:213.8.57.218",response="b8501a2d0c096b934320be23363dee32",algorithm=MD5..Content-L ength: 0.... # SER server response to the source IP and source port U 2008/06/12 21:36:01.654992 192.168.0.161:5060 -> 10.6.67.10:31472 SIP/2.0 200 OK..Via: SIP/2.0/UDP 10.6.67.10:31472;branch=z9hG4bK-d87543-de5ac063e9293020-1--d87543-; rport=31472..To: "test1"<sip:200@213.8.57.218>;tag=40c9dbfbe83fe4e1cec231af33432933.321f..From: "tes t1"<sip:200@213.8.57.218>;tag=5c6b793a..Call-ID: NmI4MTUyMWY5MTEwYTI3ZjY2ZTE2ZTMzNzk5ZGFmZWI...CSeq: 5 REGISTER..Server: OpenSER (1.3.2-notls (i386/linux))..Content-Length: 0.... but i need to response to port 5060 and not the source port , i'm not using rport, i also talk to CheckPoint service and they claim that they are working according RFC 3261, and that my SER server should reply to port 5060 any suggestions? Thanks In Advance, David Lubarski,

3 4

[Serusers] ser2-sasi : how to send instant message from shell script
by Rafael 03 Jul '08

03 Jul '08

Hi all, i have running ser2-sasi. is there a possibility to send instant message from a shell script like in the older versions with the follow example ? #!/bin/sh # cat > /tmp/ser_fifo <<EOF :t_uac_dlg:hh NOTIFY sip:receiver@127.0.0.1 . From: sip:originator@foo.bar To: sip:receiver@127.0.0.1 foo: bar_special_header x: y p_header: p_value Contact: <sip:devnull@192.168.0.100:9> 65 Chapter 4. Application Writing Content-Type: text/plain; charset=UTF-8 . Hello world!!!! $@ . EOF regards rafael

2 1

[OpenSER-Users] Help with snmpstats setup
by mayamatakeshi 03 Jul '08

03 Jul '08

Hello, I'm trying to test with snmpstats following instruction from http://www.openser.org/docs/modules/1.3.x/snmpstats.html >From snmpd output, I can see openser is connecting to it, but i don't see openser uploading any info (I'm running "snmpd -f -Dagentx -x localhost:705 2>&1 | less"). Then, when I try to get any openser info using snmpget or snmpwalk, nothing shows up. Maybe I am missing something (I confirmed snmpd finds and loads openser MIBs). Regards, takeshi

3 4

[OpenSER-Users] How to add port=5060 to top Via?
by Iñaki Baz Castillo 03 Jul '08

03 Jul '08

Hi, OpenSer by default creates a Via with no port (if port is 5060): Via: SIP/2.0/UDP 88.99.3.10;branch=z9hG4bK87ab.47b6f072.0 Because problems in my carrier's softswitch SIP stack I want top Via contains also the port 5060. AFAIK I can force that port appears by using: advertised_port=5060 but it sets a fixed value (and in a future I want to listen also in 5061 for TLS and so). Is possible OpenSer to add the **real** source port to the top Via created by it? Thanks. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

3 3

[OpenSER-Users] regarding openser monitoring
by srinivasa.reddy＠info-spectrum.com 03 Jul '08

03 Jul '08

Hi all, I am trying to install openser v1.2.0 on CentOS-5 ,when i started openser i did n't got any error messages. But when i try to monitor the openser i got following error . ----------------------------------------------------------------------------------------- [root@info OpenSER]# openserctl moni database engine 'MYSQL' loaded Control engine 'FIFO' loaded ERROR: Error opening OpenSER's FIFO /tmp/openser_fifo ERROR: Make sure you have line 'fifo=/tmp/openser_fifo' in your config -------------------------------------------------------------------------------------------------------------------- So please anybody give me some suggistion to rectify this error. With Best Regards, SRINIVAS

2 1

[OpenSER-Users] parse_msg
by sabino frisardi 03 Jul '08

03 Jul '08

Hi all, I'm using openser 1.4.i'm trying to use parse_msg function but when i call it, it doesn't work for segmentation fault in parse_fline even if the text message sip passed is correct. Can anyone help me? any suggestion? Thanks for your help. Regards -- Sabino Frisardi

2 1

[OpenSER-Users] Server did not respond to SIP messages
by Andhika Gannesha Gemilang 03 Jul '08

03 Jul '08

---------- Forwarded message ---------- From: Andhika Gannesha Gemilang <igannesha.gemilang(a)gmail.com> Date: Thu, 3 Jul 2008 12:51:08 +0700 Subject: Server did not respond to SIP messages To: users(a)list.openser.org Hi, I can't connect to my server using SIP phone (Xlite on windows). i trace sip packets using #tcpdump port 5060 and i got this : tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 12:11:54.458829 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:11:58.520903 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:02.583054 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:06.645089 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 i guess i got no problem on my SIP phone, it's just my server that didn't respond to the sip request. Here's my server status : #openserctl moni [cycle #: 1072; if constant make sure server lives] Server:: OpenSER (1.3.0-notls (i386/linux)) Now:: Thu Jul 3 12:46:03 2008 Up since:: Thu Jul 3 12:09:29 2008 Up time:: 2194 [sec] Transaction Statistics: tm:UAS_transactions = 0 tm:UAC_transactions = 0 tm:inuse_transactions = 0 Stateless Server Statistics: sl:sent_replies = 0 sl:sent_err_replies = 0 sl:received_ACKs = 0 UsrLoc Stats: usrloc:registered_users = 0 usrloc:location-users = 0 usrloc:location-contacts = 0 usrloc:location-expires = 0 any suggestion would make my life easier.... thanks AGG

1 0

[OpenSER-Users] ERROR:core:_tls_read:something wrong in SSL: 5
by xinran wang 02 Jul '08

02 Jul '08

Hi I tried to run OPENSER with SSL in Freebsd6.2. Here is the error I got: "ERROR:core:_tls_read:something wrong in SSL: 5" I checked OPENSSL docs and find "5" is SSL_ERROR_SYSCALL. Added ERR_get_error(), but get return 0. Also checked errno, the errno is EAGAIN. How to fix this ? Thanks.

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users