- sr-users - kamailio.org

[OpenSER-Users] Server did not respond to SIP messages
by Andhika Gannesha Gemilang 03 Jul '08

03 Jul '08

---------- Forwarded message ---------- From: Andhika Gannesha Gemilang <igannesha.gemilang(a)gmail.com> Date: Thu, 3 Jul 2008 12:51:08 +0700 Subject: Server did not respond to SIP messages To: users(a)list.openser.org Hi, I can't connect to my server using SIP phone (Xlite on windows). i trace sip packets using #tcpdump port 5060 and i got this : tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 12:11:54.458829 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:11:58.520903 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:02.583054 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 12:12:06.645089 IP 122.200.6.103.62482 > 122.200.6.104.sip: SIP, length: 539 i guess i got no problem on my SIP phone, it's just my server that didn't respond to the sip request. Here's my server status : #openserctl moni [cycle #: 1072; if constant make sure server lives] Server:: OpenSER (1.3.0-notls (i386/linux)) Now:: Thu Jul 3 12:46:03 2008 Up since:: Thu Jul 3 12:09:29 2008 Up time:: 2194 [sec] Transaction Statistics: tm:UAS_transactions = 0 tm:UAC_transactions = 0 tm:inuse_transactions = 0 Stateless Server Statistics: sl:sent_replies = 0 sl:sent_err_replies = 0 sl:received_ACKs = 0 UsrLoc Stats: usrloc:registered_users = 0 usrloc:location-users = 0 usrloc:location-contacts = 0 usrloc:location-expires = 0 any suggestion would make my life easier.... thanks AGG

1 0

[OpenSER-Users] ERROR:core:_tls_read:something wrong in SSL: 5
by xinran wang 02 Jul '08

02 Jul '08

Hi I tried to run OPENSER with SSL in Freebsd6.2. Here is the error I got: "ERROR:core:_tls_read:something wrong in SSL: 5" I checked OPENSSL docs and find "5" is SSL_ERROR_SYSCALL. Added ERR_get_error(), but get return 0. Also checked errno, the errno is EAGAIN. How to fix this ? Thanks.

1 0

[OpenSER-Users] DISC connection problems with Openser and client
by Florian Schildger 02 Jul '08

02 Jul '08

Hi, I've the same problem like Dilip. His headline was "Openser And DISC Connection close"... Now I get the same Error... My Openser trys to connect the DISC Client and I get the Failure: INFO:accept_connection: new tcp connection accepted! INFO:do_receive: accept received ERROR:peer_state_machine: event - state mismatch : peer=0xb7d069c4, state=1, event=0 Has anyone solve the problem? Thanks a lot in advance Cheers, Flo -- GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen! Jetzt dabei sein: http://www.shortview.de/wasistshortview.php?mc=sv_ext_mf@gmx

1 0

[OpenSER-Users] (no subject)
by Florian Schildger 02 Jul '08

02 Jul '08

Hi, I've the same problem like Dilip. His headline was "Openser And DISC Connection close"... Now I get the same Error... My Openser trys to connect the DISC Client and I get the Failure: INFO:accept_connection: new tcp connection accepted! INFO:do_receive: accept received ERROR:peer_state_machine: event - state mismatch : peer=0xb7d069c4, state=1, event=0 Has anyone solve the problem? Thanks a lot in advance Cheers, Flo -- Ist Ihr Browser Vista-kompatibel? Jetzt die neuesten Browser-Versionen downloaden: http://www.gmx.net/de/go/browser

1 0

Re: [OpenSER-Users] IP fragmentation but MB bit not being set
by Juan Pablo Fernandez 02 Jul '08

02 Jul '08

Hi Bogdan, We are using UDP transport for endpoints (xlite and Polycom IP 650) and TCP transport for our gateways (Avaya PBX with SIP support). Our proxy is record-routing and speaks UDP on the client side and TCP on the gateway side. In the client side, INVITE requests sent via UDP to the proxy are always small enough not to need fragmentation (at least for now). When the proxy adds Record-route headers, P-Asserted-Identity and some other headers, the packets length sometimes increases enough to need fragmentation. The problem was rather random but once we identify it we inserted a long custom header to reproduce it. We have been making some research and someone pointed out (thanks Tomasz Radziszewski)that in our case we are not having fragmented IP traffic but segmented TCP traffic, therefore there is no need to assert MF bit in IP flags. Because of the UDP/TCP reencapsulation we have 2 RR headers which add to the total segment length making it more prone to needing segmentation. Do you believe this is a problem in Avaya SIP implementation (Avaya CM/R013x.01.3.640.2)? Assuming the later, is there any possible workaround, may be a way to shorten SIP message body? Thanks for your help Regards Juan Pablo ----- Original Message ----- From: "Bogdan-Andrei Iancu" <bogdan(a)voice-system.ro> To: "Juan Pablo Fernandez" <juanpablo.fernandez(a)globant.com> Cc: users(a)lists.openser.org Sent: Tuesday, July 1, 2008 9:45:46 AM GMT -03:00 Argentina Subject: Re: [OpenSER-Users] IP fragmentation but MB bit not being set Hi Juan Pablo, usually this kind of fragmentation problems were an issue for UDP, but never found similar problem for TCP. Actually this the reason why the IETF guys want to obsolete UDP for SIP and keep only TCP... how is generating the packages ? what device? because more or less it will responsible for framing the content. Regards, Bogdan Juan Pablo Fernandez wrote: > Hi all, > > We are having some problems with long SIP IP packets that are being fragmented. > > We are using TCP as transport and packets bigger than ethernet MTU (1500) are being fragmented, but the "more-fragments" bit in IP flags is not being set. This is causing the remote gateway to timeout and close TCP session. > > Have somebody come across this issue before? Any suggestions? > > Thanks > > Juan Pablo > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

3 2

[Serusers] usrloc won't work after a couple days?
by lin9k＠yahoo.com 02 Jul '08

02 Jul '08

Hi, I have setup ser to run with mysql. At beginning, it worked fine that the mysql/ser/location table got the correct update. However, after 3 days the table won't get updated. When I enable the mysql log I cannot see any updating or inserting into that table. User registration is still working fine but just not get updated into the location table. Also, server_monitoring tables are working fine. Anybody run into the same problem? I am using ser-0.9.6. Another question is that how do I know the usrloc.so module is still loaded? Thanks, Ling

2 1

[Serusers] ser+sems configuration problem
by muhammad akl 01 Jul '08

01 Jul '08

hey all , i'm trying to configure ser to act as sip stack for sems i had surf the web to find tutorial talking about that but at end i didn't succeed in doing that however finally i tried to follow that tutorial : http://svn.berlios.de/viewcvs/sems/trunk/doc/Configure-Sems-Ser-HOWTO?rev=4… but with out any success , when i want to redirect the sip message to sems by adding the corresponding lines responsible for that ( from the howto ) and when trying to start ser it said bad config file heres mine : http://pastebin.com/m7872de80 and thats my sems config file : http://pastebin.com/m13c5f7b9 the errors especially appear due to syntax error in this specified line : if ( method=="ACK" || method=="INVITE" || method=="BYE" || method=="CANCEL" ){ thanks in advance

2 1

[OpenSER-Users] IP fragmentation but MB bit not being set
by Juan Pablo Fernandez 01 Jul '08

01 Jul '08

Hi all, We are having some problems with long SIP IP packets that are being fragmented. We are using TCP as transport and packets bigger than ethernet MTU (1500) are being fragmented, but the "more-fragments" bit in IP flags is not being set. This is causing the remote gateway to timeout and close TCP session. Have somebody come across this issue before? Any suggestions? Thanks Juan Pablo

2 1

[OpenSER-Users] How to connect OpenSER with an Asterisk on the same machine
by Martin Vogt 01 Jul '08

01 Jul '08

Hello, i try to connect OpenSER 1.3.2 (liestening on Port 5070) and Asterisk 1.4.19.2 (listening on Post 5060). There are 5 five Phones with the numbres 01 - 05 connected to the OpenSER. If one of the Phones dials a number that is not 01 - 05 then the call has to go to the asterisk. I think this is an easy installation but i have no practice with OpenSER. Can you please help me?? Thank you Regards Martin *** XCOM AG Legal Disclaimer *** Diese E-Mail einschliesslich ihrer Anhaenge ist vertraulich und allein für den Gebrauch durch den vorgesehenen Empfaenger bestimmt. Dritten ist das Lesen, Verteilen oder Weiterleiten dieser E-Mail untersagt. Wir bitten, eine fehlgeleitete E-Mail unverzueglich vollstaendig zu loeschen und uns eine Nachricht zukommen zu lassen. This email may contain material that is confidential and for the sole use of the intended recipient. Any review, distribution by others or forwarding without express permission is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies. Hauptsitz: Bahnstrasse 37, D-47877 Willich, USt-IdNr.: DE 812 885 664 Kommunikation: Telefon +49 2154 9209-70, Telefax +49 2154 9209-900, www.xcom.de Handelsregister: Amtsgericht Krefeld, HRB 10340 Vorstand: Matthias Albrecht, Renate Becker-Grope, Marco Marty, Dr. Rainer Fuchs Vorsitzender des Aufsichtsrates: Stefan H. Tarach

2 1

[OpenSER-Users] Problem with asterisk authenticating on invite
by Stagg Shelton 01 Jul '08

01 Jul '08

I've been trying to work through openser successfully authenticating a user on an INVITE. I've tried using www_challenge and proxy_challenge. Each time, OpenSER will respond to the INVITE with the appropriate Authentication header depending on what I'm using, and asterisk will resend the INVITE with the Digest credentials. I've determined that OpenSER returns a -5 when processing either www_authorize or proxy_authorize and the INVITE has the Digest credentials. The authentication seems to work just fine when asterisk Registers to openser. Are there any known issues with asterisk authenticating during an INVITE? I would prefer to do it this way in case the PBX loses its primary network connectivity and is failing to a secondary route, or some other reason that would cause the IP address to change. I am currently using OpenSER 1.3.1 Thank You Stagg Shelton

4 6

[Serusers] mysql API
by .:: Francesco la Torre ::. 01 Jul '08

01 Jul '08

Hi all, is there any reference to new *db* API ? In developer's guide, ch 8 there are old api. Reading ser code, in particular auth_db module, some functions seems to use valid database api. I need only to do a query but it's hard to build correctly a query and execute this, referencing only to some _similar_ code in some module. What I need, and hope to be usefull for anybody, is a template/guide/tutorial/documentation/dummy_example for a correct query execution. There is a snippet of the code : 471 static int db_example(char* db_url){ 472 str result; 473 db_cmd_t *query = NULL; 474 db_res_t *result_t; 475 db_rec_t *row; 476 477 str id_column; 478 str value_column; 479 str table; 480 str id; 481 482 table.s = "value_att"; 483 table.len = 10; 484 id_column.s = "id_value"; 485 id_column.len = 9; 486 value_column.s = "value"; 487 value_column.len = 5; 488 int len; 489 490 module_db_handle = db_ctx("module_db"); 491 if (!module_db_handle) goto err; 492 if (db_add_db(module_db_handle, db_url) < 0) goto err; 493 if (db_connect(module_db_handle) < 0) 494 goto err; 495 else 496 LOG(L_INFO,"DB connected.\n"); 497 498 /* Setup query */ 499 500 db_fld_t match_with[] = { 501 { .name = id_column.s, .type = DB_INT }, 502 { .name = NULL } 503 }; 504 db_fld_t *result_cols = NULL; 505 506 507 len = sizeof(*result_cols); 508 result_cols = pkg_malloc(len); 509 if (!result_cols) { 510 ERR("can't allocate pkg mem\n"); 511 return -1; 512 } 513 memset(result_cols, 0, len); 514 515 result_cols->name = value_column.s; 516 result_cols->type = DB_STR; 517 518 query = db_cmd(DB_GET, module_db_handle, table.s, result_cols, match_with, NULL); 519 520 id.s="2"; 521 id.len=2; 522 query->match[0].v.lstr = id; if (db_exec(&result_t, query) < 0 ) { 525 ERR("Error while querying database\n"); 526 return -1; 527 } 528 529 if (result_t) row = db_first(result_t); 530 else row=NULL; 531 532 while (row) { 533 if (IS_NULL((row)->fld[0]) || IS_NULL((row)->fld[1])) { 534 535 } else { 536 if ((row)->fld[1].v.int4 & DB_DISABLED) { 537 } else { 538 if ((row)->fld[1].v.int4 & DB_LOAD_SER) { 539 break; 540 } 541 } 542 } 543 row = db_next(result_t); 544 } 545 546 if (!row) { 547 DBG("Value not found\n"); 548 return 1; 549 } 550 551 result.s = (row)->fld[0].v.cstr; 552 result.len = strlen(result.s); 553 554 555 return 0; 556 557 558 559 560 err: 561 562 if (module_db_handle) { 563 module_db_handle = NULL; 564 db_ctx_free(module_db_handle); 565 } 566 567 LOG(L_ERR,"Error while initializing database layer\n"); 568 return -1; 569 570 } I really hope to solve this problem because I don't want to use my sql library when ser has his own database support. Thanks in advance to anybody, Francesco la Torre _______________________________________________ Serdev mailing list Serdev(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serdev

1 0

[Serusers] bug in iptel.org config?
by Klaus Darilion 01 Jul '08

01 Jul '08

Hi! When I send an INVITE with unresolveable URI, I get back 1. 500 2. 478 trace below regards Klaus 15:18:35.245 qjsimple.cpp on_directCallButton_clicked() .... 15:18:35.245 qjsimple.cpp trying to lock .... 15:18:35.245 qjsimple.cpp trying to lock .... locked 15:18:35.245 qjsimple.cpp make call ... 15:18:35.245 pjsua_call.c Making call with acc #0 to sip:test@pernau 15:18:35.245 pjsua_core.c TX 1042 bytes Request msg INVITE/cseq=21433 (tdta04398B68) to UDP 213.192.59.75:5060: INVITE sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau Contact: <sip:klaus3000@10.10.0.51:4346> Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Route: <sip:iptel.org;transport=UDP;lr> Allow: PRACK, INVITE, ACK, BYE, CANCEL, UPDATE, SUBSCRIBE, NOTIFY, PUBLISH, REFER, MESSAGE, OPTIONS Supported: replaces, 100rel, norefersub User-Agent: QjSimple 0.5pre by ipcom.at Content-Type: application/sdp Content-Length: 429 v=0 o=- 3423482315 3423482315 IN IP4 10.10.0.51 s=pjmedia c=IN IP4 10.10.0.51 t=0 0 a=X-nat:0 m=audio 4002 RTP/AVP 103 102 104 117 3 0 8 101 a=rtcp:4003 IN IP4 10.10.0.51 a=rtpmap:103 speex/16000 a=rtpmap:102 speex/8000 a=rtpmap:104 speex/32000 a=rtpmap:117 iLBC/8000 a=fmtp:117 mode=30 a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=sendrecv a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 --end msg-- 15:18:35.245 QjCallback trying to lock .... 15:18:35.245 QjCallback trying to lock .... locked 15:18:35.245 QjCallback Call 1 not found as callList is empty; new incoming call? ... ignoring 15:18:35.276 pjsua_core.c RX 566 bytes Response msg 100/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:35.276 pjsua_core.c RX 618 bytes Response msg 500/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 500 I'm terribly sorry, server error occurred (1/SL) Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:35.276 pjsua_core.c TX 390 bytes Request msg ACK/cseq=21433 (tdta04D07F70) to UDP 213.192.59.75:5060: ACK sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 ACK Route: <sip:iptel.org;transport=UDP;lr> Content-Length: 0 --end msg-- 15:18:35.276 QjCallback trying to lock .... 15:18:35.276 QjCallback trying to lock .... locked 15:18:35.276 QjCallback Call 1 state=DISCONNCTD 15:18:35.276 pjsua_core.c RX 603 bytes Response msg 478/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 478 Unresolvable destination (478/TM) Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=ab7f724f44d6a86dac492bd71f480906-d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:35.276 pjsua_core.c TX 390 bytes Request msg ACK/cseq=21433 (tdta04D07F70) to UDP 213.192.59.75:5060: ACK sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 ACK Route: <sip:iptel.org;transport=UDP;lr> Content-Length: 0 --end msg-- 15:18:35.745 pjsua_core.c RX 603 bytes Response msg 478/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 478 Unresolvable destination (478/TM) Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=ab7f724f44d6a86dac492bd71f480906-d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:35.745 pjsua_core.c TX 390 bytes Request msg ACK/cseq=21433 (tdta04D07F70) to UDP 213.192.59.75:5060: ACK sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 ACK Route: <sip:iptel.org;transport=UDP;lr> Content-Length: 0 --end msg-- 15:18:36.745 pjsua_core.c RX 603 bytes Response msg 478/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 478 Unresolvable destination (478/TM) Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=ab7f724f44d6a86dac492bd71f480906-d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:36.745 pjsua_core.c TX 390 bytes Request msg ACK/cseq=21433 (tdta04D07F70) to UDP 213.192.59.75:5060: ACK sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 ACK Route: <sip:iptel.org;transport=UDP;lr> Content-Length: 0 --end msg-- 15:18:38.745 pjsua_core.c RX 603 bytes Response msg 478/INVITE/cseq=21433 (rdata04439014) from UDP 213.192.59.75:5060: SIP/2.0 478 Unresolvable destination (478/TM) Via: SIP/2.0/UDP 10.10.0.51:4346;rport=4346;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17;received=83.136.33.3 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=ab7f724f44d6a86dac492bd71f480906-d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 INVITE Server: Sip EXpress router (2.1.0-dev21-tcp (i386/linux)) Content-Length: 0 Warning: 392 213.192.59.75:5060 "Noisy feedback tells: pid=12575 req_src_ip=83.136.33.3 req_src_port=4346 in_uri=sip:test@pernau out_uri=sip:test@pernau via_cnt==1" --end msg-- 15:18:38.745 pjsua_core.c TX 390 bytes Request msg ACK/cseq=21433 (tdta04D07F70) to UDP 213.192.59.75:5060: ACK sip:test@pernau SIP/2.0 Via: SIP/2.0/UDP 10.10.0.51:4346;rport;branch=z9hG4bKPj7274e68ee99849b3b47974eef0317c17 Max-Forwards: 70 From: sip:klaus3000@iptel.org;tag=1afbbe389ef149d6ac7bd4a0aae349f8 To: sip:test@pernau;tag=b98f1230ac1a7949bf499aa7f9ea7038.d18e Call-ID: 233a8bee32ff4a75a93cb2301506ce18 CSeq: 21433 ACK Route: <sip:iptel.org;transport=UDP;lr> Content-Length: 0 --end msg--

2 1

[OpenSER-Users] MYSQL ERROR
by Chaitanya V.N.S 01 Jul '08

01 Jul '08

hi all, I am using openser 1.3 Sometimes If we call a user , it is giving 403 even if the user is online and sometimes there is even problem with login I found this error in the log many times ERROR:mysql:db_mysql_submit_query: driver error: Commands out of sync; you can't run this command now Jun 30 06:10:24 [6188] ERROR:mysql:db_mysql_insert: error while submitting query Jun 30 06:10:24 [6188] ERROR:acc:acc_db_request: failed to insert into database Why i am getting this error. thanks in advance, Chaitanya

3 5

[OpenSER-Users] Sip phone not registered
by eliass S 30 Jun '08

30 Jun '08

Hi, I'm using openser 1.3, and I can't register my sip phones even if i've configured them. I've precised (as the SIP Server)the IP address of the computer where openser is installed, but nothing. I don't know if I've to add something in the config file of openser. Further more I've the following warning when I launch openser: openser: WARNING:core:fix_socket_list: could not rev. resolve 192.168.10.2 where 192.168.10.2 is the IP address of the computer where openser is installed, so thje address of my the SIP Server. V. _________________________________________________________________ Faites vous de nouveaux amis grâce à l'annuaire des profils Messenger ! http://home.services.spaces.live.com/search/?page=searchresults&ss=true&For…

3 2

[OpenSER-Users] remove openser
by Eliass Salim 30 Jun '08

30 Jun '08

Hi, I've to install openser on a computer which is not mine, and I 'd like to now if there is a way to remove it, because I know that a simple "make uninstall" doesn't work. thanks

1 0

[OpenSER-Users] remove_hf from textops does not remove whole header field
by Schumann Sebastian 30 Jun '08

30 Jun '08

Dear all I try to remove a Via from a header. Unfortunately, the via from INVITE sip:user@domain SIP/2.0 Via: SIP/2.0/UDP 10.0.0.1:20592;branch=z9hG4bK-d8754z-1955bd20f1745139-1---d8754z-;rport Max-Forwards: 70 is changed after remove_hf("Via") to INVITE sip:user@domain SIP/2.0 Via: SIP/2.0/UDP 10.0.0.2;branch=z9hG4bK-d8754z-1955bd20f1745139-1---d8754z- ;rport=20592Max-Forwards: 69 10.0.0.2 is a proxy i sent the message through and 10.0.0.1 is the originating endpoint. So rport is not removed and no CRLF is added after the rport parameter is added. Is this behaviour as it should be? I wanted to remove the whole line. Or can I restrict adding the rport parameter? Furthermore, the option _not_ to set an via for a message sent through my proxy 10.0.0.2 would be also very helpful for me. It is not possible though, right? At least I didn't find any further information.... Any ideas? Best regards Sebastian -- Sebastian Schumann, Dipl.-Inf. (FH) Junior Designer Applications Slovak Telekom, a. s. T-Com, Operations Unit Production and Service Division Innovations and Enterprise Solution Subunit Architecture and Design Department Address: Karadzicova 10, 825 13 Bratislava, Slovakia Office: Room 449, Jarabinkova 1, 821 09 Bratislava, Slovakia Tel. +421 2 588 13332 Mobile +421 910 643010 E-mail sebastian.schumann(a)t-com.sk Web www.t-com.sk <http://www.t-com.sk/>

2 2

[OpenSER-Users] Preserving original number when using alias_db_lookup
by Stagg Shelton 30 Jun '08

30 Jun '08

I found in the archives about how to preserve the original number when using alias_db_lookup. I am still learning OpenSER, and AVP is a challenge for me. I am looking for an example that I can use that can save the $rU in an avp before the alias_db_lookup and restore it afterwards. Thanks Stagg

5 12

Re: [OpenSER-Users] I can't configure Diameter Client Server (DISC)
by Elena-Ramona Modroiu 28 Jun '08

28 Jun '08

Hi, check if the print.so exists. Also change in the config file the print module loading directive to module= print.so Regards, Ramona Florian Schildger wrote: > > Hi @ all, > > I want to built a Diameter-Client and –Server with disc, but it is > very tricky. Can someone help me? > > My plan is, a UA gives an invite to a SIP Express Router, this one > forwards the request to a DISC Client, which forwards the request to > the DISC Server and authenticate the UA. > My first problem is to start the DISC. > > What I did: > > 1. Download the disc with cvs and Install it > > cvs -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617…> > login > cvs -z3 -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617…> > co disc > ./rebuild > make > make install > > 2. Then Configure aaa_client.cfg > > 17 aaa_realm= 192.160.45 > 18 aaa_fqdn = 192.160.45:1810 > > 21 module_path= usr/local/lib/disc/client/ > 22 module= usr/local/lib/disc/client/print.so > > 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server > 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER > > 42 route= aaa://192.168.0.45:1812;transport=tcp > > # For the Modules I don't know what to do, because I couldn't find any > module!!! Only the print one, but I think I don'tneed it, do I? > > 3. After that I could't not start disc, because I had no File disc.cfg > in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg > to disc.cfg > > cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg > > 4. Then I start in the Console: > > debian:~# disc > qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 > (size=12) on 1 -th hit > qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 > (size=16) on 1 -th hit > qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 > (size=28) on 1 -th hit > before loading the modules > loading module > usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called > from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c > (size=36) on 1 -th hit > ERROR: load_module: failed to load > <usr/local/lib/disc/client/print.so> in <client/modules>: > usr/local/lib/disc/client/print.so: cannot open shared object file: No > such file or directory > FAILED > ERROR (-1): on line 25 > ERROR: cannot init the core > ERROR:AAAClose: AAA library is not initialized > INFO:init_trans_manager: transaction manager stoped! > INFO:destroy_peer_manager: peer manager stoped > INFO:destroy_timer: timer thread stoped > qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: > destroy_aaa_core(576) > qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: > destroy_aaa_core(577) > qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_status (0xb7cab008): > heap size= 1022872 > used= 68, used+overhead=26012, free=996860 > max used (+overhead)= 26040 > dumping all allocked. fragments: > 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 > alloc'd from shm_mem.c: shm_mem_init_mallocs(185) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > dumping free list stats : > hash= 3. fragments no.: 1 > hash= 4. fragments no.: 1 > hash= 521. fragments no.: 1 > ----------------------------- > shm_mem_destroy > destroying the shared memory lock > > > He could not load the module right? But where I can get it? How can I > use disc as Client and Server? I did only the configure for the > client! I read out, that disc only can work as an client or as an server. > > Can someone give me a hint? > > Cheers, Flo > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users >

2 7

[OpenSER-Users] avp_radius question
by Ricardo Martinez 27 Jun '08

27 Jun '08

Hello Is there a way to send in a radius request the Called and Callee information? The avp_radius module seems to what i need to do, but it works with "called only" or "callee only" formats. I need to send in a radius request both fields. Can someone help me here? Thanks Regards, Ricardo.-

2 2

[OpenSER-Users] NEW FEATURE: local route for internally generated requests
by Bogdan-Andrei Iancu 27 Jun '08

27 Jun '08

Hi, OpenSER has a new type of route: local route. This route is to be executed when a brand new request is internally generated (openser being the UAC) ; such requests are result of : - t_uac_dlg MI command - msilo, sms, presence, cpl-c, dialog (and others) modules Purpose ======== This need route was added to meet the need to do dynamic manipulation (do some checking, adding headers, logging, etc) of the internally generated requests; without this new route, these requests were totally transparent for the openser script. Some strong cases there were debated for a long time on the lists: - adding new headers into internally generated requests - so far all kind of hacks were used to do it (like defining module parameters with predefined headers to be added in the request - see presence modules) - logging (log or xlog) information about the outgoing requests - see the discussion about the presence internal logging - accounting - there was no way to account these requests (as accounting can be triggered only from script) - see the discussion around the dialog module for how to account the BYEs generated by this module How to use =========== there is a single instance of this route allowed in the configuration: local_route { ...... } Note that not all the functions are allowed to be called from this route (better check the docs before) Example: local_route { .... if (is_method("NOTIFY")) { xlog("new $rm sent out for $ru via $du\n"); } .... if (is_method("BYE")) { acc_log_request("internal bye"); append_hf("X-note: terminated by dialog module"); } .... } Limitations ============ - you can access RURI and destination uri ($ru and $du), but any change of these value will be discarded - you cannot change the destination of the request - there is no transaction persistence (yet) - you cannot set onreply or failure routes, flags are not pushed into transaction ; this will be probably available in the next version. - accounting via flags do not work - as this requires transaction persistence (see above) Regards, Bogdan

2 4

[OpenSER-Users] regarding openser v 1.2.0
by Naveen Kumar 26 Jun '08

26 Jun '08

Hi, when i tried to execute the following command i am getting peculiar error....please anybody can help me. [root@info sbin]# openserctl start database engine 'MYSQL' loaded Control engine 'FIFO' loaded Starting OpenSER : 19153 ? S 0:00 /bin/sh /usr/local/sbin/openserctl moni 19154 ? S 0:00 /bin/sh /usr/local/sbin/openserctl moni 19423 pts/9 S+ 0:00 /bin/sh /usr/local/sbin/openserctl start -rw-r--r-- 1 root root 0 Jun 26 23:56 /var/run/openser.pid INFO: PID file exists (/var/run/openser.pid)! OpenSER already running? your suggetions are very helpfull for my further proceedings, With Best Regards, Naveen.

2 1

[OpenSER-Users] regarding openser v 1.2.0 installation
by Naveen Kumar 26 Jun '08

26 Jun '08

Hi all, I am new to the Openser.Now i am trying to install openser v 1.2.0 in centos 5. whilw installation process i am getting the following error. [root@info sbin]# openser_mysql.sh create MySQL password for root: Enter password: Enter password: creating database openser ... ERROR 1007 (HY000) at line 1: Can't create database 'openser'; database exists Creating core tables failed! Any one please help, for proceeding further installation. With Best Reagards, Naveen.

2 1

[Serusers] no BYE
by Pezhman Lali 26 Jun '08

26 Jun '08

Hi Dear, I am using ser --> asterisk for outgoing calls. the ser does not send bye, if the caller hanging up. so, the session was not killed. plz help me . best

1 0

Re: [OpenSER-Users] openser is not running
by Eliass Salim 26 Jun '08

26 Jun '08

Yes, but I think there is a problem with the makefile, because when I use "make all" the compilation stops on : Linking xlog.so gcc -shared -Wl,-O2 -Wl,-E xl_lib.o xlog.o -o xlog.so make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/modules/xlog' cd utils/openserunix; make all make[1]: Entering directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' make[1]: Nothing to be done for `all'. make[1]: Leaving directory `/usr/local/src/openser-1.3.0/sip-server/utils/openserunix' if [ "no" = "yes" ]; then \ cd utils/db_berkeley; make all ; \ fi ; Eliass David Villasmil wrote: > Have you read ALL the documentation? > Have you looked for error in /var/log/syslog? > Do you understand the openser.cfg? > > > d > > On Wed, Jun 25, 2008 at 4:00 PM, Eliass Salim <salim(a)enseirb.fr > <mailto:salim@enseirb.fr>> wrote: > > hi, > > I've installed openser 1.3.0 ( by following instructions from > http://www.openser.org/dokuwiki/do [...] -from-svn) > <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> > on my computer (fedora core 6,result of the command uname -a: Linux > park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 > i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser > start, > I've this: > [eliass@park ~]$ /etc/init.d/openser start > Starting openser: openser /var/run/openser/openser.pidListening on > udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 > <http://127.0.0.1>]:5060 > udp: 192.168.10.110 <http://192.168.10.110> > [192.168.10.110 <http://192.168.10.110>]:5060 > tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 > <http://127.0.0.1>]:5060 > tcp: 192.168.10.110 <http://192.168.10.110> > [192.168.10.110 <http://192.168.10.110>]:5060 > Aliases: > tcp: localhost:5060 > udp: localhost:5060 > > . > [eliass@park ~]$ > > OK, but when I check Openser status via /etc/ini.d/openser, I've: > Status of openser: openser is not running. > So, I don't undrstand why. > Can you help me? > Thanks > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > >

4 7

[Serusers] Re : Using OpenSER as Predictive Dialer for a Call Center ?
by deb ale 26 Jun '08

26 Jun '08

Do you concider sippy B2BUA? ----- Message d'origine ---- De : Arthur <pylinuxian(a)gmail.com> À : serusers(a)lists.iptel.org Envoyé le : Jeudi, 26 Juin 2008, 1h17mn 37s Objet : [Serusers] Using OpenSER as Predictive Dialer for a Call Center ? I am working on a project for a call center about programming an open source predictive dialer, and so far my research shows no sign of a competitor to Asterisk. I hope someone can guide me here, because I don't know yet whether OpenSER can be programmed to make calls automatically and if callees answers the calls hand the calls to agents ? .. allow agents to make transfers to other agents ... and other call center stuff. Thanks -- "He who asks a question may be a fool for a few minutes. He who does not ask may be a fool forever" _____________________________________________________________________________ Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr

2 1

[OpenSER-Users] AVP's in openser.cfg
by Jason Penton 26 Jun '08

26 Jun '08

Hi * how do you pass AVP values to script functions in openser. if I do - myFunction("somestring",$avp(s:someotherstring)); - openser fails to load, and myFunction("somestring","$avp(s:someotherstring)"); - passes the actual AVP string to the script and not the evaluation of the AVP string Kind regards Jason

3 3

[Serusers] Using OpenSER as Predictive Dialer for a Call Center ?
by Arthur 25 Jun '08

25 Jun '08

I am working on a project for a call center about programming an open source predictive dialer, and so far my research shows no sign of a competitor to Asterisk. I hope someone can guide me here, because I don't know yet whether OpenSER can be programmed to make calls automatically and if callees answers the calls hand the calls to agents ? .. allow agents to make transfers to other agents ... and other call center stuff. Thanks -- "He who asks a question may be a fool for a few minutes. He who does not ask may be a fool forever"

1 0

[Serusers] Aliases on multiple domain
by Rosa De Santis 25 Jun '08

25 Jun '08

Hello all. Please, I'd like to know if there is a way to handle aliases for multiple domain ser server. I have 4 ser servers, each one serves on a different domain, all of them connected to one database. I need some users to connect to one server and other users to another server . They use aliases, but they can't call each other when they are on registered on different servers. When I create the alias I have to put the especific domain. How can I use aliases without restricting the user to one server? or how can I call between them? Thanks, Rosa. _________________________________________________________________ Stop squinting -- view your photos on your TV. Learn more. http://www.microsoft.com/windows/digitallife/default.mspx?deepLink=photos

1 0

[OpenSER-Users] changing ANI only for a particular gw
by David Villasmil 25 Jun '08

25 Jun '08

Hello all, I'm required to send a particular FROM for a specific provider, for now, I'm doing it with: uac_replace_from("8888888","sip:8888888@1.2.3.4<sip%3A8888888(a)1.2.3.4> "); I'm wondering, is there another way to set this? Imagine each provider requires a different FROM... thanks to all d

2 1

[OpenSER-Users] bflag in perl module
by Julien mangeard 25 Jun '08

25 Jun '08

Hi, Can I get the bflag value in a script loaded with the perl module ? It seams to me that the 'isbflagset' function isn't implemented. Do you know another manner to obtain this value ? Best Regards, -- Julien Mangeard

2 3

[OpenSER-Users] Possible bug when appending "a=nortpproxy:yes" ?
by mayamatakeshi 25 Jun '08

25 Jun '08

Hello, I'm testing with OpenSER 1.3.x revision 4393 with RTPProxy. I'm trying to make a call from a Nokia E51 to a SIPp instance started with: sipp -sn uas -p 6060 -mp 4000 The INVITE goes thru OpenSER to SIPp and then, SIPp replies with this: SIPp to OpenSER: SIP/2.0 200 OK Via: SIP/2.0/UDP 210.126.5.158;branch=z9hG4bK9c1e.f06224f3.0, SIP/2.0/UDP 192.168.0.4:5060;received=123.224.149.169 ;branch=z9hG4bK5j85u8aa6jpebhelr55b8bj;rport=64351 From: <sip:1000@210.126.5.158 <sip%3A1000(a)210.126.5.158> >;tag=r5hbkuj8mlhc6o184cms To: <sip:22222222@210.126.5.158 <sip%3A22222222(a)210.126.5.158> ;user=phone>;tag=28909SIPpTag013 Call-ID: nLPxHi_hoIf-POcJ7OKojntw2wgQle CSeq: 7342 INVITE Contact: <sip:192.168.88.16:6060;transport=UDP> Content-Type: application/sdp Content-Length: 135 v=0 o=user1 53655765 2353687637 IN IP4 192.168.88.16 s=- c=IN IP4 192.168.88.16 t=0 0 m=audio 4000 RTP/AVP 0 a=rtpmap:0 PCMU/8000 But when OpenSER relays this to E51, I can see it is adding "a=nortpproxy:yes" immediatelly after the the last characters in the SDP instead of prepending a CRLF. OpenSER to Caller SIP/2.0 200 OK Via: SIP/2.0/UDP 192.168.0.4:5060;received=123.224.149.169 ;branch=z9hG4bK5j85u8aa6jpebhelr55b8bj;rport=64351 From: <sip:1000@210.126.5.158 <sip%3A1000(a)210.126.5.158> >;tag=r5hbkuj8mlhc6o184cms To: <sip:22222222@210.126.5.158 <sip%3A22222222(a)210.126.5.158> ;user=phone>;tag=28909SIPpTag013 Call-ID: nLPxHi_hoIf-POcJ7OKojntw2wgQle CSeq: 7342 INVITE Contact: <sip:210.126.5.158:6060;transport=UDP;nat=yes> Content-Type: application/sdp Content-Length: 154 v=0 o=user1 53655765 2353687637 IN IP4 192.168.88.16 s=- c=IN IP4 210.126.5.158 t=0 0 m=audio 36740 RTP/AVP 0 a=rtpmap:0 PCMU/8000a=nortpproxy:yes Because of this, E51 ignores the message and doesn't send ACK. I believe this is a bug in OpenSER. Thanks, Takeshi

3 3

[OpenSER-Users] openser is not running
by Eliass Salim 25 Jun '08

25 Jun '08

hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.168.10.110 [192.168.10.110]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.168.10.110 [192.168.10.110]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks

1 0

[OpenSER-Users] openser is not running
by Eliass Salim 25 Jun '08

25 Jun '08

hi, I've installed openser 1.3.0 ( by following instructions from http://www.openser.org/dokuwiki/do [...] -from-svn) <http://www.openser.org/dokuwiki/doku.php/install:openser-from-svn%29> on my computer (fedora core 6,result of the command uname -a: Linux park 2.6.20-1.2952.fc6 #1 SMP Wed May 16 17:59:13 EDT 2007 i686 i686 i386 GNU/Linux), and when I launch OpenSER via /etc/ini.d/openser start, I've this: [eliass@park ~]$ /etc/init.d/openser start Starting openser: openser /var/run/openser/openser.pidListening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.168.10.110 [192.168.10.110]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.168.10.110 [192.168.10.110]:5060 Aliases: tcp: localhost:5060 udp: localhost:5060 . [eliass@park ~]$ OK, but when I check Openser status via /etc/ini.d/openser, I've: Status of openser: openser is not running. So, I don't undrstand why. Can you help me? Thanks

1 0

[OpenSER-Users] Why (uri!=mysqlf) even though I see correct uri
by Sheeju Alex 25 Jun '08

25 Jun '08

Hello everybody, I am having a problem while REGISTERing to openser. I have understood that in my case even though REGISTER method is sent always uri != myself, which is why register is not honored can anyone point me the reason behind it. Anybody please give me some advices? Thank you very much!!! Alex Here is snippet of openser.cfg where I am logging inside (!uri==myself) ++++++++++++++++++++++++++++++++++++++++++++++++ if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { xlog("L_INFO", "request method URI not matched: [$rm], from URI: [$fu], To URI: [$tu]"); append_hf("P-hint: outbound\r\n"); route(1); } ++++++++++++++++++++++++++++++++++++++++++++++++ Here is my complete openser.cfg # $Id: openser.cfg 4083 2008-04-24 19:26:11Z miconda $ debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 port=5060 ####### Modules Section ######## #set module path mpath="/usr/local/lib64/openser/modules/" /* uncomment next line for MySQL DB support */ loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- #modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "load_credentials", "") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accouting ... setflag(3); # ... even if the transaction fails } route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accouting } ### Added to hit this Asterisk system itself (nxxtcom2) if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { xlog("L_INFO", "request method URI not matched: [$rm], from URI: [$fu], To URI: [$tu]"); append_hf("P-hint: outbound\r\n"); route(1); } xlog("L_INFO", "request method: [$rm], from URI: [$fu], To URI: [$tu]"); # requests for my domain /* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2); if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { xlog("L_INFO", "In Register method: [$rm], from URI: [$fu], To URI: [$tu]"); # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("nxxtcom1.kanobe.net", "subscriber")) { xlog("L_INFO", "In authorize section: [$rm], from URI: [$fu], To URI: [$tu]"); www_challenge("nxxtcom1.kanobe.net", "0"); exit; } ## ##if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##} if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { # for INVITEs enable some additional helper routes ## if (is_method("INVITE")) { ## t_on_branch("2"); ## t_on_reply("2"); ## t_on_failure("1"); ## } if (!t_relay()) { sl_reply_error(); }; exit; } branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } }

2 1

[OpenSER-Users] Wants to know abt memory Dump
by Dilip 25 Jun '08

25 Jun '08

Hello EvryOne, During running the Openser ,it gives me that "out of pkg memory error". After giving this error i have fired the "kill -SIGUSR1 15054" cmd which gives me the memory dump. Which is given below. Can u explain me what actually this memory dump gives?? [root@dilip openser-1.3.0-tls]# kill -SIGUSR1 15054 [root@dilip openser-1.3.0-tls]# Memory status (pkg): qm_status (0x73bb80): heap size= 67108864 used= 33400, used+overhead=278144, free=66830720 max used (+overhead)= 278144 dumping all alloc'ed. fragments: 0. N address=0x771098 frag=0x771068 size=48 used=1 alloc'd from timer.c: new_sr_timer(151) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 1. N address=0x771128 frag=0x7710f8 size=32 used=1 alloc'd from script_cb.c: add_callback(52) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 2. N address=0x7711a8 frag=0x771178 size=48 used=1 alloc'd from timer.c: new_sr_timer(151) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0x771238 frag=0x771208 size=48 used=1 alloc'd from timer.c: new_sr_timer(151) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0x7712c8 frag=0x771298 size=32 used=1 alloc'd from script_cb.c: add_callback(52) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 5. N address=0x771348 frag=0x771318 size=32 used=1 alloc'd from script_cb.c: add_callback(52) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 6. N address=0x7713c8 frag=0x771398 size=48 used=1 alloc'd from timer.c: new_sr_timer(151) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 7. N address=0x771458 frag=0x771428 size=8 used=1 alloc'd from aaa_avps.h: parse_aaa_avps(149) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 8. N address=0x7714c0 frag=0x771490 size=32 used=1 alloc'd from auth_mod.c: generate_random_secret(191) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 9. N address=0x771540 frag=0x771510 size=48 used=1 alloc'd from aaa_avps.h: parse_aaa_avps(95) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 10. N address=0x7715d0 frag=0x7715a0 size=8 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 11. N address=0x771638 frag=0x771608 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 12. N address=0x771700 frag=0x7716d0 size=152 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 13. N address=0x7717f8 frag=0x7717c8 size=24 used=1 alloc'd from cfg.y: yyparse(1044) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 14. N address=0x771870 frag=0x771840 size=16 used=1 alloc'd from cfg.y: yyparse(446) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 15. N address=0x7718e0 frag=0x7718b0 size=24 used=1 alloc'd from cfg.y: mk_listen_id(2282) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 16. N address=0x771958 frag=0x771928 size=160 used=1 alloc'd from socket_info.c: new_sock_info(107) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 17. N address=0x771a58 frag=0x771a28 size=16 used=1 alloc'd from socket_info.c: new_sock_info(112) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 18. N address=0x771ac8 frag=0x771a98 size=160 used=1 alloc'd from socket_info.c: new_sock_info(107) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 19. N address=0x771bc8 frag=0x771b98 size=16 used=1 alloc'd from socket_info.c: new_sock_info(112) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 20. N address=0x771c38 frag=0x771c08 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 21. N address=0x771d18 frag=0x771ce8 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 22. N address=0x771d98 frag=0x771d68 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 23. N address=0x771e78 frag=0x771e48 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 24. N address=0x771ef8 frag=0x771ec8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 25. N address=0x771fd8 frag=0x771fa8 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 26. N address=0x772058 frag=0x772028 size=8 used=1 alloc'd from pvar.c: pv_init_extra_list(3463) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 27. N address=0x7720c0 frag=0x772090 size=80 used=1 alloc'd from pvar.c: pv_add_extra(3527) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 28. N address=0x772170 frag=0x772140 size=80 used=1 alloc'd from pvar.c: pv_add_extra(3527) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 29. N address=0x772220 frag=0x7721f0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 30. N address=0x772300 frag=0x7722d0 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 31. N address=0x772380 frag=0x772350 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 32. N address=0x772460 frag=0x772430 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 33. N address=0x7724e0 frag=0x7724b0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 34. N address=0x7725c0 frag=0x772590 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 35. N address=0x772640 frag=0x772610 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 36. N address=0x772720 frag=0x7726f0 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 37. N address=0x7727a0 frag=0x772770 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 38. N address=0x772880 frag=0x772850 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 39. N address=0x772900 frag=0x7728d0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 40. N address=0x7729e0 frag=0x7729b0 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 41. N address=0x772a60 frag=0x772a30 size=80 used=1 alloc'd from pvar.c: pv_add_extra(3527) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 42. N address=0x772b10 frag=0x772ae0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 43. N address=0x772bf0 frag=0x772bc0 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 44. N address=0x772c70 frag=0x772c40 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 45. N address=0x772d50 frag=0x772d20 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 46. N address=0x772dd0 frag=0x772da0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 47. N address=0x772eb0 frag=0x772e80 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 48. N address=0x772f30 frag=0x772f00 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 49. N address=0x773010 frag=0x772fe0 size=32 used=1 alloc'd from sr_module.c: register_module(133) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 50. N address=0x773090 frag=0x773060 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 51. N address=0x773170 frag=0x773140 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 52. N address=0x773250 frag=0x773220 size=16 used=1 alloc'd from socket_info.c: fix_socket_list(532) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 53. N address=0x7732c0 frag=0x773290 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 54. N address=0x7733a0 frag=0x773370 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 55. N address=0x773480 frag=0x773450 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 56. N address=0x773560 frag=0x773530 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 57. N address=0x773640 frag=0x773610 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 58. N address=0x773720 frag=0x7736f0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 59. N address=0x773800 frag=0x7737d0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 60. N address=0x7738e0 frag=0x7738b0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 61. N address=0x7739c0 frag=0x773990 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 62. N address=0x773aa0 frag=0x773a70 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 63. N address=0x773b80 frag=0x773b50 size=24 used=1 alloc'd from socket_info.c: fix_socket_list(571) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 64. N address=0x773bf8 frag=0x773bc8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 65. N address=0x773cd8 frag=0x773ca8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 66. N address=0x773db8 frag=0x773d88 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 67. N address=0x773e98 frag=0x773e68 size=128 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 68. N address=0x773f78 frag=0x773f48 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 69. N address=0x774068 frag=0x774038 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 70. N address=0x774100 frag=0x7740d0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 71. N address=0x774198 frag=0x774168 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 72. N address=0x774230 frag=0x774200 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 73. N address=0x774310 frag=0x7742e0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 74. N address=0x7743f0 frag=0x7743c0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 75. N address=0x7744d0 frag=0x7744a0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 76. N address=0x7745c0 frag=0x774590 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 77. N address=0x7746b0 frag=0x774680 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 78. N address=0x7747a0 frag=0x774770 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 79. N address=0x774838 frag=0x774808 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 80. N address=0x7748d0 frag=0x7748a0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 81. N address=0x7749b0 frag=0x774980 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 82. N address=0x774a90 frag=0x774a60 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 83. N address=0x774b70 frag=0x774b40 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 84. N address=0x774c60 frag=0x774c30 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 85. N address=0x774d50 frag=0x774d20 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 86. N address=0x774e40 frag=0x774e10 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 87. N address=0x774f20 frag=0x774ef0 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 88. N address=0x774fb8 frag=0x774f88 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 89. N address=0x775050 frag=0x775020 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 90. N address=0x7750e8 frag=0x7750b8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 91. N address=0x7751c8 frag=0x775198 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 92. N address=0x7752b8 frag=0x775288 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 93. N address=0x7753a8 frag=0x775378 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 94. N address=0x775488 frag=0x775458 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 95. N address=0x775578 frag=0x775548 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 96. N address=0x775610 frag=0x7755e0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 97. N address=0x7756a8 frag=0x775678 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 98. N address=0x775788 frag=0x775758 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 99. N address=0x775868 frag=0x775838 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 100. N address=0x775958 frag=0x775928 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 101. N address=0x775a48 frag=0x775a18 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 102. N address=0x775b38 frag=0x775b08 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 103. N address=0x775bd0 frag=0x775ba0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 104. N address=0x775c68 frag=0x775c38 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 105. N address=0x775d00 frag=0x775cd0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 106. N address=0x775de0 frag=0x775db0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 107. N address=0x775ec0 frag=0x775e90 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 108. N address=0x775fb0 frag=0x775f80 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 109. N address=0x7760a0 frag=0x776070 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 110. N address=0x776190 frag=0x776160 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 111. N address=0x776270 frag=0x776240 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 112. N address=0x776308 frag=0x7762d8 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 113. N address=0x7763a0 frag=0x776370 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 114. N address=0x776480 frag=0x776450 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 115. N address=0x776560 frag=0x776530 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 116. N address=0x776650 frag=0x776620 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 117. N address=0x776730 frag=0x776700 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 118. N address=0x776810 frag=0x7767e0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 119. N address=0x776900 frag=0x7768d0 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 120. N address=0x776998 frag=0x776968 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 121. N address=0x776a30 frag=0x776a00 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 122. N address=0x776ac8 frag=0x776a98 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 123. N address=0x776ba8 frag=0x776b78 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 124. N address=0x776c88 frag=0x776c58 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 125. N address=0x776d78 frag=0x776d48 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 126. N address=0x776e68 frag=0x776e38 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 127. N address=0x776f58 frag=0x776f28 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 128. N address=0x777048 frag=0x777018 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 129. N address=0x7770e0 frag=0x7770b0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 130. N address=0x777178 frag=0x777148 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 131. N address=0x777258 frag=0x777228 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 132. N address=0x7772f0 frag=0x7772c0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 133. N address=0x777388 frag=0x777358 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 134. N address=0x777468 frag=0x777438 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 135. N address=0x777548 frag=0x777518 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 136. N address=0x777638 frag=0x777608 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 137. N address=0x777718 frag=0x7776e8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 138. N address=0x7777f8 frag=0x7777c8 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 139. N address=0x7778e8 frag=0x7778b8 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 140. N address=0x777980 frag=0x777950 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 141. N address=0x777a18 frag=0x7779e8 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 142. N address=0x777ab0 frag=0x777a80 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 143. N address=0x777b90 frag=0x777b60 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 144. N address=0x777c70 frag=0x777c40 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 145. N address=0x777d60 frag=0x777d30 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 146. N address=0x777e40 frag=0x777e10 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 147. N address=0x777f20 frag=0x777ef0 size=128 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 148. N address=0x778000 frag=0x777fd0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 149. N address=0x7780f0 frag=0x7780c0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 150. N address=0x7781d0 frag=0x7781a0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 151. N address=0x7782b0 frag=0x778280 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 152. N address=0x7783a0 frag=0x778370 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 153. N address=0x778490 frag=0x778460 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 154. N address=0x778580 frag=0x778550 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 155. N address=0x778660 frag=0x778630 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 156. N address=0x778740 frag=0x778710 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 157. N address=0x778830 frag=0x778800 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 158. N address=0x778910 frag=0x7788e0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 159. N address=0x7789f0 frag=0x7789c0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 160. N address=0x778ae0 frag=0x778ab0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 161. N address=0x778bd0 frag=0x778ba0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 162. N address=0x778cc0 frag=0x778c90 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 163. N address=0x778da0 frag=0x778d70 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 164. N address=0x778e80 frag=0x778e50 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 165. N address=0x778f70 frag=0x778f40 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 166. N address=0x779008 frag=0x778fd8 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 167. N address=0x7790a0 frag=0x779070 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 168. N address=0x779138 frag=0x779108 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 169. N address=0x779218 frag=0x7791e8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 170. N address=0x7792f8 frag=0x7792c8 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 171. N address=0x7793e8 frag=0x7793b8 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 172. N address=0x7794d8 frag=0x7794a8 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 173. N address=0x7795c8 frag=0x779598 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 174. N address=0x7796a8 frag=0x779678 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 175. N address=0x779788 frag=0x779758 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 176. N address=0x779878 frag=0x779848 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 177. N address=0x779910 frag=0x7798e0 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 178. N address=0x7799a8 frag=0x779978 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 179. N address=0x779a40 frag=0x779a10 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 180. N address=0x779b20 frag=0x779af0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 181. N address=0x779c00 frag=0x779bd0 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 182. N address=0x779ce0 frag=0x779cb0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 183. N address=0x779dd0 frag=0x779da0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 184. N address=0x779ec0 frag=0x779e90 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 185. N address=0x779fb0 frag=0x779f80 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 186. N address=0x77a090 frag=0x77a060 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 187. N address=0x77a170 frag=0x77a140 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 188. N address=0x77a260 frag=0x77a230 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 189. N address=0x77a350 frag=0x77a320 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 190. N address=0x77a440 frag=0x77a410 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 191. N address=0x77a520 frag=0x77a4f0 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 192. N address=0x77a610 frag=0x77a5e0 size=56 used=1 alloc'd from route_struct.c: mk_elem(69) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 193. N address=0x77a6a8 frag=0x77a678 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 194. N address=0x77a740 frag=0x77a710 size=56 used=1 alloc'd from route_struct.c: mk_exp(53) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 195. N address=0x77a7d8 frag=0x77a7a8 size=128 used=1 alloc'd from cfg.lex: addstr(777) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 196. N address=0x77a8b8 frag=0x77a888 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 197. N address=0x77a9a8 frag=0x77a978 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 198. N address=0x77aa98 frag=0x77aa68 size=144 used=1 alloc'd from route_struct.c: mk_action(103) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 199. N address=0x77ab88 frag=0x77ab58 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 200. N address=0x77ac08 frag=0x77abd8 size=8 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 201. N address=0x77ac70 frag=0x77ac40 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 202. N address=0x77acf0 frag=0x77acc0 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 203. N address=0x77ad60 frag=0x77ad30 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 204. N address=0x77ade0 frag=0x77adb0 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 205. N address=0x77ae50 frag=0x77ae20 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 206. N address=0x77aed0 frag=0x77aea0 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 207. N address=0x77af40 frag=0x77af10 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 208. N address=0x77afc0 frag=0x77af90 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 209. N address=0x77b030 frag=0x77b000 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 210. N address=0x77b0b0 frag=0x77b080 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 211. N address=0x77b120 frag=0x77b0f0 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 212. N address=0x77b1a0 frag=0x77b170 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 213. N address=0x77b210 frag=0x77b1e0 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 214. N address=0x77b290 frag=0x77b260 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 215. N address=0x77b300 frag=0x77b2d0 size=24 used=1 alloc'd from socket_info.c: fix_socket_list(607) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 216. N address=0x77b378 frag=0x77b348 size=8 used=1 alloc'd from socket_info.c: fix_socket_list(532) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 217. N address=0x77b3e0 frag=0x77b3b0 size=16 used=1 alloc'd from socket_info.c: fix_socket_list(571) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 218. N address=0x77b450 frag=0x77b420 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 219. N address=0x77b4d0 frag=0x77b4a0 size=8 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 220. N address=0x77b538 frag=0x77b508 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 221. N address=0x77b5b8 frag=0x77b588 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 222. N address=0x77b628 frag=0x77b5f8 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 223. N address=0x77b6a8 frag=0x77b678 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 224. N address=0x77b718 frag=0x77b6e8 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 225. N address=0x77b798 frag=0x77b768 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 226. N address=0x77b808 frag=0x77b7d8 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 227. N address=0x77b888 frag=0x77b858 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 228. N address=0x77b8f8 frag=0x77b8c8 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 229. N address=0x77b978 frag=0x77b948 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 230. N address=0x77b9e8 frag=0x77b9b8 size=32 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 231. N address=0x77ba68 frag=0x77ba38 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 232. N address=0x77bad8 frag=0x77baa8 size=80 used=1 alloc'd from name_alias.h: add_alias(92) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 233. N address=0x77bb88 frag=0x77bb58 size=16 used=1 alloc'd from name_alias.h: add_alias(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 234. N address=0x77bbf8 frag=0x77bbc8 size=24 used=1 alloc'd from socket_info.c: fix_socket_list(607) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 235. N address=0x77bc70 frag=0x77bc40 size=32 used=1 alloc'd from timer.c: new_timer_process_list(70) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 236. N address=0x77bcf0 frag=0x77bcc0 size=80 used=1 alloc'd from tcp_main.c: init_tcp(1579) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 237. N address=0x77bda0 frag=0x77bd70 size=48 used=1 alloc'd from usr_avp.c: add_avp_galias(467) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 238. N address=0x77be30 frag=0x77be00 size=16 used=1 alloc'd from usr_avp.c: add_avp_galias(473) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 239. N address=0x77bea0 frag=0x77be70 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 240. N address=0x77bf68 frag=0x77bf38 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 241. N address=0x77c030 frag=0x77c000 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 242. N address=0x77c0f8 frag=0x77c0c8 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 243. N address=0x77c1c0 frag=0x77c190 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 244. N address=0x77c288 frag=0x77c258 size=176 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 245. N address=0x77c398 frag=0x77c368 size=5936 used=1 alloc'd from xlog.c: mod_init(115) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 246. N address=0x77db28 frag=0x77daf8 size=1288 used=1 alloc'd from mi/mi.c: register_mi_cmd(125) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 247. N address=0x77e090 frag=0x77e060 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 248. N address=0x77e158 frag=0x77e128 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 249. N address=0x77e220 frag=0x77e1f0 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 250. N address=0x77e2e8 frag=0x77e2b8 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 251. N address=0x77e3b0 frag=0x77e380 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 252. N address=0x77e478 frag=0x77e448 size=24 used=1 alloc'd from dbase.c: db_mysql_init(120) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 253. N address=0x77e4f0 frag=0x77e4c0 size=48 used=1 alloc'd from db/db_id.c: new_db_id(219) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 254. N address=0x77e580 frag=0x77e550 size=8 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 255. N address=0x77e5e8 frag=0x77e5b8 size=16 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 256. N address=0x77e658 frag=0x77e628 size=16 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 257. N address=0x77e6c8 frag=0x77e698 size=8 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 258. N address=0x77e730 frag=0x77e700 size=56 used=1 alloc'd from my_con.c: db_mysql_new_connection(45) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 259. N address=0x77e7c8 frag=0x77e798 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 260. N address=0x77e890 frag=0x77e860 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 261. N address=0x77e958 frag=0x77e928 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 262. N address=0x77ea20 frag=0x77e9f0 size=104 used=1 alloc'd from pvar.c: pv_parse_format(3017) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 263. N address=0x77eae8 frag=0x77eab8 size=16 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 264. N address=0x77eb58 frag=0x77eb28 size=16 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 265. N address=0x77ebc8 frag=0x77eb98 size=56 used=1 alloc'd from my_con.c: db_mysql_new_connection(45) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 266. N address=0x77ec60 frag=0x77ec30 size=72 used=1 alloc'd from auth_diameter.c: mod_child_init(149) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 267. N address=0x77ed08 frag=0x77ecd8 size=48 used=1 alloc'd from db/db_id.c: new_db_id(219) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 268. N address=0x77ed98 frag=0x77ed68 size=8 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 269. N address=0x77ee00 frag=0x77edd0 size=8 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 270. N address=0x77ee68 frag=0x77ee38 size=16 used=1 alloc'd from db/db_id.c: dupl_string(38) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 271. N address=0x77eed8 frag=0x77eea8 size=24 used=1 alloc'd from dbase.c: db_mysql_init(120) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 272. N address=0x77ef50 frag=0x77ef20 size=1248 used=1 alloc'd from my_con.c: db_mysql_new_connection(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 273. N address=0x77f490 frag=0x77f460 size=1248 used=1 alloc'd from my_con.c: db_mysql_new_connection(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 2060. fragments no.: 1, unused: 0 bucket size: 33554432 - 67108864 (first 66830720) ----------------------------- Memory status (shm): qm_status (0x2aaaac80d000): heap size= 33554432 used= 2692176, used+overhead=2924248, free=30630184 max used (+overhead)= 2924248 dumping all alloc'ed. fragments: 0. N address=0x2aaaac842518 frag=0x2aaaac8424e8 size=8 used=1 alloc'd from mem/shm_mem.c: shm_mem_init_mallocs(196) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 1. N address=0x2aaaac842580 frag=0x2aaaac842550 size=8 used=1 alloc'd from timer.c: init_timer(94) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 2. N address=0x2aaaac8425e8 frag=0x2aaaac8425b8 size=8 used=1 alloc'd from timer.c: init_timer(95) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0x2aaaac842650 frag=0x2aaaac842620 size=8 used=1 alloc'd from tcp_main.c: init_tcp(1566) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0x2aaaac8426b8 frag=0x2aaaac842688 size=8 used=1 alloc'd from tcp_main.c: init_tcp(1586) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 5. N address=0x2aaaac842720 frag=0x2aaaac8426f0 size=8192 used=1 alloc'd from tcp_main.c: init_tcp(1594) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 6. N address=0x2aaaac844780 frag=0x2aaaac844750 size=8192 used=1 alloc'd from tcp_main.c: init_tcp(1600) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 7. N address=0x2aaaac8467e0 frag=0x2aaaac8467b0 size=8 used=1 alloc'd from main.c: main(1297) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 8. N address=0x2aaaac846848 frag=0x2aaaac846818 size=2064 used=1 alloc'd from statistics.c: init_stats_collector(100) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 9. N address=0x2aaaac8470b8 frag=0x2aaaac847088 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 10. N address=0x2aaaac847150 frag=0x2aaaac847120 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 11. N address=0x2aaaac8471b8 frag=0x2aaaac847188 size=40 used=1 alloc'd from sl_funcs.c: sl_startup(80) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 12. N address=0x2aaaac847240 frag=0x2aaaac847210 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 13. N address=0x2aaaac8472d8 frag=0x2aaaac8472a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 14. N address=0x2aaaac847340 frag=0x2aaaac847310 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 15. N address=0x2aaaac8473d8 frag=0x2aaaac8473a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 16. N address=0x2aaaac847440 frag=0x2aaaac847410 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 17. N address=0x2aaaac8474d8 frag=0x2aaaac8474a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 18. N address=0x2aaaac847540 frag=0x2aaaac847510 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 19. N address=0x2aaaac8475d8 frag=0x2aaaac8475a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 20. N address=0x2aaaac847640 frag=0x2aaaac847610 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 21. N address=0x2aaaac8476d8 frag=0x2aaaac8476a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 22. N address=0x2aaaac847740 frag=0x2aaaac847710 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 23. N address=0x2aaaac8477d8 frag=0x2aaaac8477a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 24. N address=0x2aaaac847840 frag=0x2aaaac847810 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 25. N address=0x2aaaac8478d8 frag=0x2aaaac8478a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 26. N address=0x2aaaac847940 frag=0x2aaaac847910 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 27. N address=0x2aaaac8479d8 frag=0x2aaaac8479a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 28. N address=0x2aaaac847a40 frag=0x2aaaac847a10 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 29. N address=0x2aaaac847ad8 frag=0x2aaaac847aa8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 30. N address=0x2aaaac847b40 frag=0x2aaaac847b10 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 31. N address=0x2aaaac847bd8 frag=0x2aaaac847ba8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 32. N address=0x2aaaac847c40 frag=0x2aaaac847c10 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 33. N address=0x2aaaac847cd8 frag=0x2aaaac847ca8 size=80 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 34. N address=0x2aaaac847d88 frag=0x2aaaac847d58 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 35. N address=0x2aaaac847e20 frag=0x2aaaac847df0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 36. N address=0x2aaaac847eb8 frag=0x2aaaac847e88 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 37. N address=0x2aaaac847f50 frag=0x2aaaac847f20 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 38. N address=0x2aaaac847fe8 frag=0x2aaaac847fb8 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 39. N address=0x2aaaac848080 frag=0x2aaaac848050 size=1792 used=1 alloc'd from blacklists.c: init_black_lists(99) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 40. N address=0x2aaaac8487e0 frag=0x2aaaac8487b0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 41. N address=0x2aaaac848878 frag=0x2aaaac848848 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 42. N address=0x2aaaac8488e0 frag=0x2aaaac8488b0 size=120 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 43. N address=0x2aaaac8489b8 frag=0x2aaaac848988 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 44. N address=0x2aaaac848a20 frag=0x2aaaac8489f0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 45. N address=0x2aaaac848ab8 frag=0x2aaaac848a88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 46. N address=0x2aaaac848b20 frag=0x2aaaac848af0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 47. N address=0x2aaaac848bb8 frag=0x2aaaac848b88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 48. N address=0x2aaaac848c20 frag=0x2aaaac848bf0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 49. N address=0x2aaaac848cb8 frag=0x2aaaac848c88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 50. N address=0x2aaaac848d20 frag=0x2aaaac848cf0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 51. N address=0x2aaaac848db8 frag=0x2aaaac848d88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 52. N address=0x2aaaac848e20 frag=0x2aaaac848df0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 53. N address=0x2aaaac848eb8 frag=0x2aaaac848e88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 54. N address=0x2aaaac848f20 frag=0x2aaaac848ef0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 55. N address=0x2aaaac848fb8 frag=0x2aaaac848f88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 56. N address=0x2aaaac849020 frag=0x2aaaac848ff0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 57. N address=0x2aaaac8490b8 frag=0x2aaaac849088 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 58. N address=0x2aaaac849120 frag=0x2aaaac8490f0 size=2621440 used=1 alloc'd from h_table.c: init_hash_table(360) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 59. N address=0x2aaaacac9180 frag=0x2aaaacac9150 size=16 used=1 alloc'd from lock.c: lock_initialize(90) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 60. N address=0x2aaaacac91f0 frag=0x2aaaacac91c0 size=896 used=1 alloc'd from timer.c: tm_init_timers(511) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 61. N address=0x2aaaacac95d0 frag=0x2aaaacac95a0 size=16 used=1 alloc'd from t_hooks.c: init_tmcb_lists(51) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 62. N address=0x2aaaacac9640 frag=0x2aaaacac9610 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 63. N address=0x2aaaacac96d8 frag=0x2aaaacac96a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 64. N address=0x2aaaacac9740 frag=0x2aaaacac9710 size=160 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 65. N address=0x2aaaacac9840 frag=0x2aaaacac9810 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 66. N address=0x2aaaacac98a8 frag=0x2aaaacac9878 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 67. N address=0x2aaaacac9940 frag=0x2aaaacac9910 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 68. N address=0x2aaaacac99a8 frag=0x2aaaacac9978 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 69. N address=0x2aaaacac9a40 frag=0x2aaaacac9a10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 70. N address=0x2aaaacac9aa8 frag=0x2aaaacac9a78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 71. N address=0x2aaaacac9b40 frag=0x2aaaacac9b10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 72. N address=0x2aaaacac9ba8 frag=0x2aaaacac9b78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 73. N address=0x2aaaacac9c40 frag=0x2aaaacac9c10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 74. N address=0x2aaaacac9ca8 frag=0x2aaaacac9c78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 75. N address=0x2aaaacac9d40 frag=0x2aaaacac9d10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 76. N address=0x2aaaacac9da8 frag=0x2aaaacac9d78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 77. N address=0x2aaaacac9e40 frag=0x2aaaacac9e10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 78. N address=0x2aaaacac9ea8 frag=0x2aaaacac9e78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 79. N address=0x2aaaacac9f40 frag=0x2aaaacac9f10 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 80. N address=0x2aaaacac9fa8 frag=0x2aaaacac9f78 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 81. N address=0x2aaaacaca040 frag=0x2aaaacaca010 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 82. N address=0x2aaaacaca0a8 frag=0x2aaaacaca078 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 83. N address=0x2aaaacaca140 frag=0x2aaaacaca110 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 84. N address=0x2aaaacaca1a8 frag=0x2aaaacaca178 size=2064 used=1 alloc'd from ../../lock_alloc.h: lock_set_alloc(66) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 85. N address=0x2aaaacacaa18 frag=0x2aaaacaca9e8 size=16 used=1 alloc'd from ul_callback.c: init_ulcb_list(44) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 86. N address=0x2aaaacacaa88 frag=0x2aaaacacaa58 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 87. N address=0x2aaaacacab20 frag=0x2aaaacacaaf0 size=200 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 88. N address=0x2aaaacacac48 frag=0x2aaaacacac18 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 89. N address=0x2aaaacacacb0 frag=0x2aaaacacac80 size=240 used=1 alloc'd from statistics.c: add_stat_module(205) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 90. N address=0x2aaaacacae00 frag=0x2aaaacacadd0 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 91. N address=0x2aaaacacae68 frag=0x2aaaacacae38 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 92. N address=0x2aaaacacaf00 frag=0x2aaaacacaed0 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 93. N address=0x2aaaacacaf68 frag=0x2aaaacacaf38 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 94. N address=0x2aaaacacb000 frag=0x2aaaacacafd0 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 95. N address=0x2aaaacacb068 frag=0x2aaaacacb038 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 96. N address=0x2aaaacacb100 frag=0x2aaaacacb0d0 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 97. N address=0x2aaaacacb168 frag=0x2aaaacacb138 size=1544 used=1 alloc'd from pt.c: init_multi_proc_support(86) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 98. N address=0x2aaaacacb7d0 frag=0x2aaaacacb7a0 size=32 used=1 alloc'd from dlist.c: new_dlist(379) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 99. N address=0x2aaaacacb850 frag=0x2aaaacacb820 size=16 used=1 alloc'd from dlist.c: new_dlist(387) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 100. N address=0x2aaaacacb8c0 frag=0x2aaaacacb890 size=48 used=1 alloc'd from udomain.c: new_udomain(89) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 101. N address=0x2aaaacacb950 frag=0x2aaaacacb920 size=20480 used=1 alloc'd from udomain.c: new_udomain(96) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 102. N address=0x2aaaacad09b0 frag=0x2aaaacad0980 size=16 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 103. N address=0x2aaaacad0a20 frag=0x2aaaacad09f0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 104. N address=0x2aaaacad0ab8 frag=0x2aaaacad0a88 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 105. N address=0x2aaaacad0b20 frag=0x2aaaacad0af0 size=24 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 106. N address=0x2aaaacad0b98 frag=0x2aaaacad0b68 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 107. N address=0x2aaaacad0c30 frag=0x2aaaacad0c00 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 108. N address=0x2aaaacad0c98 frag=0x2aaaacad0c68 size=24 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 109. N address=0x2aaaacad0d10 frag=0x2aaaacad0ce0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 110. N address=0x2aaaacad0da8 frag=0x2aaaacad0d78 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 111. N address=0x2aaaacad0e10 frag=0x2aaaacad0de0 size=32 used=1 alloc'd from dlist.c: new_dlist(379) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 112. N address=0x2aaaacad0e90 frag=0x2aaaacad0e60 size=8 used=1 alloc'd from dlist.c: new_dlist(387) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 113. N address=0x2aaaacad0ef8 frag=0x2aaaacad0ec8 size=48 used=1 alloc'd from udomain.c: new_udomain(89) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 114. N address=0x2aaaacad0f88 frag=0x2aaaacad0f58 size=20480 used=1 alloc'd from udomain.c: new_udomain(96) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 115. N address=0x2aaaacad5fe8 frag=0x2aaaacad5fb8 size=16 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 116. N address=0x2aaaacad6058 frag=0x2aaaacad6028 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 117. N address=0x2aaaacad60f0 frag=0x2aaaacad60c0 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 118. N address=0x2aaaacad6158 frag=0x2aaaacad6128 size=24 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 119. N address=0x2aaaacad61d0 frag=0x2aaaacad61a0 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 120. N address=0x2aaaacad6268 frag=0x2aaaacad6238 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 121. N address=0x2aaaacad62d0 frag=0x2aaaacad62a0 size=16 used=1 alloc'd from udomain.c: build_stat_name(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 122. N address=0x2aaaacad6340 frag=0x2aaaacad6310 size=56 used=1 alloc'd from statistics.c: register_stat(238) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 123. N address=0x2aaaacad63d8 frag=0x2aaaacad63a8 size=8 used=1 alloc'd from statistics.c: register_stat(246) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 124. N address=0x2aaaacad6440 frag=0x2aaaacad6410 size=72 used=1 alloc'd from urecord.c: new_urecord(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 125. N address=0x2aaaacad64e8 frag=0x2aaaacad64b8 size=8 used=1 alloc'd from urecord.c: new_urecord(61) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 126. N address=0x2aaaacad6550 frag=0x2aaaacad6520 size=168 used=1 alloc'd from ucontact.c: new_ucontact(55) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 127. N address=0x2aaaacad6658 frag=0x2aaaacad6628 size=32 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 128. N address=0x2aaaacad66d8 frag=0x2aaaacad66a8 size=24 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 129. N address=0x2aaaacad6750 frag=0x2aaaacad6720 size=8 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 130. N address=0x2aaaacad67b8 frag=0x2aaaacad6788 size=72 used=1 alloc'd from urecord.c: new_urecord(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 131. N address=0x2aaaacad6860 frag=0x2aaaacad6830 size=8 used=1 alloc'd from urecord.c: new_urecord(61) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 132. N address=0x2aaaacad68c8 frag=0x2aaaacad6898 size=168 used=1 alloc'd from ucontact.c: new_ucontact(55) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 133. N address=0x2aaaacad69d0 frag=0x2aaaacad69a0 size=32 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 134. N address=0x2aaaacad6a50 frag=0x2aaaacad6a20 size=24 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 135. N address=0x2aaaacad6ac8 frag=0x2aaaacad6a98 size=8 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 136. N address=0x2aaaacad6b30 frag=0x2aaaacad6b00 size=72 used=1 alloc'd from urecord.c: new_urecord(54) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 137. N address=0x2aaaacad6bd8 frag=0x2aaaacad6ba8 size=8 used=1 alloc'd from urecord.c: new_urecord(61) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 138. N address=0x2aaaacad6c40 frag=0x2aaaacad6c10 size=168 used=1 alloc'd from ucontact.c: new_ucontact(55) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 139. N address=0x2aaaacad6d48 frag=0x2aaaacad6d18 size=32 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 140. N address=0x2aaaacad6dc8 frag=0x2aaaacad6d98 size=24 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 141. N address=0x2aaaacad6e40 frag=0x2aaaacad6e10 size=8 used=1 alloc'd from ../../ut.h: shm_str_dup(496) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 2059. fragments no.: 1, unused: 0 bucket size: 16777216 - 33554432 (first 30630184) -----------------------------

2 1

[OpenSER-Users] connecting OpenSER to IPBX
by Ahmed Huraimel 25 Jun '08

25 Jun '08

Hi all, i dont now if it the right place tp post the request here or not. but anyway, i have my openser server running and i decided to add a connectivity to the PSTN. the Lab i am working in they have alcatel omnipcx enterprise IPBX. did anyone knows how to connect opneser to the alcatel omnipcx enterprise IPBX through SIP trunk? i section 5.4 this pdf file http://www.dipotel.co.yu/force_download.php?file_id=3hzg7x8jpvcr they said it is possible to build a SIP trunking. did anyone knows how and from where i should start? i will appreciate any help to this issue. regards, Ahmed ALALI

1 0

[OpenSER-Users] openser listen:0.0.0.0
by toly 25 Jun '08

25 Jun '08

Greetings, Below are the parts of routing script, listen=0.0.0.0 # This is where OpenSER installed port=5070 children=8 reply_to_via = no sip_warning = yes check_via = no dns=no rev_dns=no disable_dns_blacklist=true route { if (!pike_check_req()) { xlog("L_NOTICE", "TRACKING [0] ALARM - TOO MANY HITS on IP=$si !!"); exit; }; # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; force_rport(); # ----------------------------------------------------------------- # Record Route Section and Acc section # ----------------------------------------------------------------- if (method=="INVITE" && nat_uac_test("19")) { record_route_preset("_DNS_NAME_HIDDEN_:5070;nat=yes"); } else if (method!="REGISTER") { record_route(); }; ...... } I have no problems with the script with normal ip or dns name, that's why I have not posted the whole. It does not work with listen=0.0.0.0 If A invites B, then B send OK, proxy can't route ACK from A to B - it's looping the same happened with BYE , proxy can't route - it's looping On proxy's startup I get this in the log: 06/24 19:37:42 warning <socket_info.c: 590> WARNING: fix_socket_list: could not rev. resolve 0.0.0.0 06/24 19:37:42 debug <socket_info.h: 316> DEBUG:socket2str: <udp:0.0.0.0:5070> 06/24 19:37:42 warning <socket_info.c: 590> WARNING: fix_socket_list: could not rev. resolve 0.0.0.0 06/24 19:37:42 debug <socket_info.h: 316> DEBUG:socket2str: <tcp:0.0.0.0:5070> As I understand 0.0.0.0 will be included in the record-route and as a result proxy will not be able to route the message. Can anybody answer with with more formal explanation of it? Thanks a lot, Toly -- View this message in context: http://www.nabble.com/openser-listen%3A0.0.0.0-tp18103385p18103385.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

3 3

[OpenSER-Users] About xmpp-sip interoperability.
by Gaoqiang Qian 25 Jun '08

25 Jun '08

Hi all, I have setup and configured my Openser with mysql, presence, xmpp, pua modules. The server was startup fine. I setup the xmpp module as the xmpp gateway as component module cuase I have another jabber server running remotely. The configuration of servers parameters is as below: #---------------openser.cfg------------------ listen=udp:193.210.148.243:5060 alias=xmpp.rcs.demo modparam("xmpp", "domain_separator", "*") modparam("xmpp", "gateway_domain", "xmpp.rcs.demo")//added to etc/hosts file modparam("xmpp", "xmpp_domain", "rcs.allatum.wipsl.com")//added to etc/hosts file modparam("xmpp", "xmpp_host", "allatum.wipsl.com") modparam("xmpp", "backend", "component") #-------------------------------------------- Now I want to test the interoperability of XMPP gateway of openser, so I use sip client (X-lite) and a XMPP client. I use sip and xmpp account to successfully register in the sip and XMPP client: sip account: sip:test@193.210.148.244 xmpp acount: gqian(a)allatum.wipsl.com But what destination address should I use to add to both of the client to test the interoperability? I failed at below address added according to the xmpp module document. At SIP client I add Contact address: sip:gqian*allatum.wipsl.com@xmpp.rcs.demo At XMPP client: test*193.210.148.244(a)rcs.allatum.wipsl.com Does anyone has this testing experience and give me some hints how should I add the contacts in both client to let them talk to each other? I am now really heading the wall. Thanks a lot in advance. BR, Gaoqiang -- Gaoqiang Qian Automation System and Technology Helsinki University Of Technology GSM: +358415058138

2 3

[OpenSER-Users] carrierroute question.
by Ricardo Martinez 25 Jun '08

25 Jun '08

Hello. I'm facing a problem with the carrierroute module (openser version 1.3.2). i hope that someone could help me. I have two gateways for a particular destination. GW1and GW2 : +----+---------+-------------+--------+------+-------+---------------+----------------+----------------+--------------+ | id | carrier | scan_prefix | domain | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix | comment | +----+---------+-------------+--------+------+-------+---------------+----------------+----------------+--------------+ | 1 | 0 | 200 | 0 | 0.3 | 0 | GW1.IP | | | op 1 | | 2 | 0 | 200 | 0 | 0.3 | 0 | GW2.IP | | | op 2 | | 3 | 1 | 200 | 1 | 1 | 0 | GW3.IP | | | op 3 | +----+---------+-------------+--------+------+-------+---------------+----------------+----------------+--------------+ Let's say, for example, that GW1 is down (offline). Is possible via the carrierroute module try with the other gateway (GW2) before sending the call to the failure_route?. My configuration file is very similar to the example in the docs. route[2] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } route[5] { # CARRIER ROUTE MODULE HANDLING. # route calls based on hash over callid # choose route domain 0 of the default carrier if(!cr_rewrite_uri("0", "call_id")){ sl_send_reply("403", "Not allowed - CR"); } else { # In case of failure, re-route the request t_on_failure("2"); # Relay the request to the gateway route(2); } } failure_route[2] { # In case of failure, send it to an alternative route: if (t_check_status("408|5[0-9][0-9]")) { #choose route domain 1 of the default carrier if(!cr_rewrite_uri("1", "call_id")){ t_reply("403", "Not allowed"); } else { route(2); } } } How can i address this issue? Thanks, Regards, Ricardo Martinez.-

2 1

[OpenSER-Users] Pre/Post pay billing solution recommendations?
by Max Lock 25 Jun '08

25 Jun '08

Hi Folks, This is a really easy one I'm sure. Can any of you recommend any billing systems that support pre and post paid billing, that I can use (or can be made to work) with OpenSER? -Cheers Max. -- Max Lock Gingo Ltd

2 1

[OpenSER-Users] Playing RTP Session
by Chaitanya V.N.S 24 Jun '08

24 Jun '08

Hi, I got no replay for that. I have even put that question in rtpproxy form but no response. I have appended the header (PCMA or PCMU) to that file using a java program and tried to play that file . It is playing but the audio quality is very bad. Java code that I wrote to apped header ------------------------------------------------------------------------- import java.io.ByteArrayInputStream; import java.io.File; import java.io.FileInputStream; import javax.sound.sampled.AudioFormat; import javax.sound.sampled.AudioInputStream; import javax.sound.sampled.AudioSystem; import javax.sound.sampled.AudioFileFormat.Type; /** * * @author chaitanya */ public class AudioFileWriter { public static void main(String args[]) { File file1 = new File("/home/chaitanya/Desktop/a.rtp"); //RTP file recorded by rtp proxy File file = new File("/home/chaitanya/Desktop/a.wav");//Out put wave file AudioFormat af=new AudioFormat(new AudioFormat.Encoding("ULAW"),8000,8,1,4,8000,false); // ULAW or ALAW what ever u r using and there respective bit rates int length; try{ AudioInputStream ais=new AudioInputStream(new FileInputStream(file1),af,AudioSystem.NOT_SPECIFIED); //ByteArrayInputStream bais=new ByteArrayInputStream(b,0,b.length); Type afft=new Type("WAVE","WAV"); AudioSystem.write(ais,afft,file); } catch(Exception e){ e.printStackTrace(); } } } --------------------------------------------------------------------------------------------------- You can try this. If you find any other solution please let me know. regards, Chaitu

2 1

[OpenSER-Users] I need help to build opendiameter as server and openser as client....
by d_willi 24 Jun '08

24 Jun '08

Hello, I need help to configure the Opendiameter applications. My problem is, I try to configure the Opendiameter as an Authentication-Server. But I find no docu about the configure!!! My architecture "I want to build" is an UA, who want to make an Invite to an other UA. The Invite goes to an OpenSER, which act as an Diameterclient, and route the Invite to the Diameter-Server. The Server authenticates the UA and gives an auth.answer to the OpenSER, which relays the auth.answer to the called UA. UA Openser (Client) OpenDiameter (Server) UA |----------------->|--------------------------------->| |<---------------------------------| |---------------------------------------------------------------------->| I think the best way is to use the "Diameter SIP application", but there is no lib in the Opendiameter. So I have to do it with NASREQ application.But how can I configure the application??? Can someone give me a hint??? Can someone help me??? U can write me at dariuszwillim(a)yahoo.de thx a lot -- View this message in context: http://www.nabble.com/I-need-help-to-build-opendiameter-as-server-and-opens… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

3 2

[OpenSER-Users] Using script variable
by Ruchir 24 Jun '08

24 Jun '08

I was thinking of using script variable to hold the source leg information for multi-leg accounting as avp variables will be lost when request is relayed(I'm pushing uri and relaying request in case of call forwarding). Is it safe way or will it create any issues when simultaneous calls are going on.

5 9

[OpenSER-Users] how to read MAX_URI_SIZE in openser.cfg
by Zappasodi Daniele 24 Jun '08

24 Jun '08

hello, how can I read the MAX_URI_SIZE value in openser.cfg? regards, Daniele ********************************************************************** The information in this message is confidential and may be legally privileged. It is intended solely for the addressee. Access to this message by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, or distribution of the message, or any action or omission taken by you in reliance on it, is prohibited and may be unlawful. Please immediately contact the sender if you have received this message inerror. **********************************************************************

2 1

[OpenSER-Users] Acc Modules + Extra paramters
by Ali Jawad 24 Jun '08

24 Jun '08

Hi All Does anyone have a working example of modparam("acc", "diameter_extra", "7846=$hdr(Content-type);7847=$avp(s:email)") In my setup I do have modparam("acc", "db_url", "mysql://openser:123456@87.236.144.12/openser") modparam("acc", "acc_from_tag_column", "from_tag") modparam("acc", "acc_to_tag_column", "to_tag") modparam("acc", "db_flag", 2) #modparam("acc", "db_extra", "ct=$hdr(Content-type); email=$avp(s:email)") I am getting the from and to data in the MySQL acc table. However I do need to save the URI and RURI as well. I tried with the example above but it stopped the logging to the database. Can anyone please direct me into the correct direction ? Thanks.

2 8

[OpenSER-Users] I can't configure Diameter Server Client (DISC)
by Florian Schildger 24 Jun '08

24 Jun '08

Hi @ all, I want to built a Diameter-Client and –Server with disc, but it is very tricky. Can someone help me? My plan is, a UA gives an invite to a SIP Express Router, this one forwards the request to a DISC Client, which forwards the request to the DISC Server and authenticate the UA. My first problem is to start the DISC. What I did: 1. Download the disc with cvs and Install it cvs -d:pserver:anonymous@...:/cvsroot/disc login cvs -z3 -d:pserver:anonymous@...:/cvsroot/disc co disc ./rebuild make make install 2. Then Configure aaa_client.cfg 17 aaa_realm= 192.160.45 18 aaa_fqdn = 192.160.45:1810 21 module_path= usr/local/lib/disc/client/ 22 module= usr/local/lib/disc/client/print.so 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER 42 route= aaa://192.168.0.45:1812;transport=tcp # For the Modules I don't know what to do, because I couldn't find any module!!! Only the print one, but I think I don'tneed it, do I? 3. After that I could't not start disc, because I had no File disc.cfg in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg to disc.cfg cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg 4. Then I start in the Console: debian:~# disc qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 (size=12) on 1 -th hit qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 (size=16) on 1 -th hit qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 (size=28) on 1 -th hit before loading the modules loading module usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c (size=36) on 1 -th hit ERROR: load_module: failed to load <usr/local/lib/disc/client/print.so> in <client/modules>: usr/local/lib/disc/client/print.so: cannot open shared object file: No such file or directory FAILED ERROR (-1): on line 25 ERROR: cannot init the core ERROR:AAAClose: AAA library is not initialized INFO:init_trans_manager: transaction manager stoped! INFO:destroy_peer_manager: peer manager stoped INFO:destroy_timer: timer thread stoped qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: destroy_aaa_core(576) qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: destroy_aaa_core(577) qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_status (0xb7cab008): heap size= 1022872 used= 68, used+overhead=26012, free=996860 max used (+overhead)= 26040 dumping all allocked. fragments: 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 alloc'd from shm_mem.c: shm_mem_init_mallocs(185) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 3. fragments no.: 1 hash= 4. fragments no.: 1 hash= 521. fragments no.: 1 ----------------------------- shm_mem_destroy destroying the shared memory lock It could not load the module right? But where I can get it? How can I use disc as Client and Server? I did only the configure for the client! I read out, that disc only can work as a client or as a server. Can someone give me a hint? Cheers, Flo -- Psssst! Schon vom neuen GMX MultiMessenger gehört? Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

1 0

[OpenSER-Users] I can't configure Diameter Server Client (DISC)
by Flosch 24 Jun '08

24 Jun '08

Hi @ all, I want to built a Diameter-Client and –Server with disc, but it is very tricky. Can someone help me? My plan is, a UA gives an invite to a SIP Express Router, this one forwards the request to a DISC Client, which forwards the request to the DISC Server and authenticate the UA. My first problem is to start the DISC. What I did: 1. Download the disc with cvs and Install it cvs -d:pserver:anonymous@...:/cvsroot/disc login cvs -z3 -d:pserver:anonymous@...:/cvsroot/disc co disc ./rebuild make make install 2. Then Configure aaa_client.cfg 17 aaa_realm= 192.160.45 18 aaa_fqdn = 192.160.45:1810 21 module_path= usr/local/lib/disc/client/ 22 module= usr/local/lib/disc/client/print.so 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER 42 route= aaa://192.168.0.45:1812;transport=tcp # For the Modules I don't know what to do, because I couldn't find any module!!! Only the print one, but I think I don'tneed it, do I? 3. After that I could't not start disc, because I had no File disc.cfg in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg to disc.cfg cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg 4. Then I start in the Console: debian:~# disc qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 (size=12) on 1 -th hit qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 (size=16) on 1 -th hit qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 (size=28) on 1 -th hit before loading the modules loading module usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c (size=36) on 1 -th hit ERROR: load_module: failed to load <usr/local/lib/disc/client/print.so> in <client/modules>: usr/local/lib/disc/client/print.so: cannot open shared object file: No such file or directory FAILED ERROR (-1): on line 25 ERROR: cannot init the core ERROR:AAAClose: AAA library is not initialized INFO:init_trans_manager: transaction manager stoped! INFO:destroy_peer_manager: peer manager stoped INFO:destroy_timer: timer thread stoped qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: destroy_aaa_core(576) qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: destroy_aaa_core(577) qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_status (0xb7cab008): heap size= 1022872 used= 68, used+overhead=26012, free=996860 max used (+overhead)= 26040 dumping all allocked. fragments: 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 alloc'd from shm_mem.c: shm_mem_init_mallocs(185) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 3. fragments no.: 1 hash= 4. fragments no.: 1 hash= 521. fragments no.: 1 ----------------------------- shm_mem_destroy destroying the shared memory lock It could not load the module right? But where I can get it? How can I use disc as Client and Server? I did only the configure for the client! I read out, that disc only can work as a client or as a server. Can someone give me a hint? Cheers, Flo -- View this message in context: http://www.nabble.com/I-can%27t-configure-Diameter-Server-Client-%28DISC%29… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

[OpenSER-Users] I can't configure Diameter Server Client (DISC)
by Flosch 24 Jun '08

24 Jun '08

Hi @ all, I want to built a Diameter-Client and –Server with disc, but it is very tricky. Can someone help me? My plan is, a UA gives an invite to a SIP Express Router, this one forwards the request to a DISC Client, which forwards the request to the DISC Server and authenticate the UA. My first problem is to start the DISC. What I did: 1. Download the disc with cvs and Install it cvs -d:pserver:anonymous@...:/cvsroot/disc login cvs -z3 -d:pserver:anonymous@...:/cvsroot/disc co disc ./rebuild make make install 2. Then Configure aaa_client.cfg 17 aaa_realm= 192.160.45 18 aaa_fqdn = 192.160.45:1810 21 module_path= usr/local/lib/disc/client/ 22 module= usr/local/lib/disc/client/print.so 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER 42 route= aaa://192.168.0.45:1812;transport=tcp # For the Modules I don't know what to do, because I couldn't find any module!!! Only the print one, but I think I don'tneed it, do I? 3. After that I could't not start disc, because I had no File disc.cfg in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg to disc.cfg cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg 4. Then I start in the Console: debian:~# disc qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 (size=12) on 1 -th hit qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 (size=16) on 1 -th hit qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 (size=28) on 1 -th hit before loading the modules loading module usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c (size=36) on 1 -th hit ERROR: load_module: failed to load in : usr/local/lib/disc/client/print.so: cannot open shared object file: No such file or directory FAILED ERROR (-1): on line 25 ERROR: cannot init the core ERROR:AAAClose: AAA library is not initialized INFO:init_trans_manager: transaction manager stoped! INFO:destroy_peer_manager: peer manager stoped INFO:destroy_timer: timer thread stoped qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: destroy_aaa_core(576) qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: destroy_aaa_core(577) qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_status (0xb7cab008): heap size= 1022872 used= 68, used+overhead=26012, free=996860 max used (+overhead)= 26040 dumping all allocked. fragments: 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 alloc'd from shm_mem.c: shm_mem_init_mallocs(185) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 3. fragments no.: 1 hash= 4. fragments no.: 1 hash= 521. fragments no.: 1 ----------------------------- shm_mem_destroy destroying the shared memory lock It could not load the module right? But where I can get it? How can I use disc as Client and Server? I did only the configure for the client! I read out, that disc only can work as a client or as a server. Can someone give me a hint? Cheers, Flo -- View this message in context: http://www.nabble.com/I-can%27t-configure-Diameter-Server-Client-%28DISC%29… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

Re: [OpenSER-Users] I can't configure Diameter Client Server (DISC)
by Flosch 24 Jun '08

24 Jun '08

Flosch wrote: > > Hi @ all, > > I want to built a Diameter-Client and -Server with disc, but it is very > tricky. Can someone help me? > > > > My plan is, a UA gives an invite to a SIP Express Router, this one > forwards > the request to a DISC Client, which forwards the request to the DISC > Server > and authenticate the UA. > My first problem is to start the DISC. > > What I did: > > 1. Download the disc with cvs and Install it > > cvs > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617 > 41099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> > -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc login > cvs -z3 > <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617 > 41099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> > -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc co disc > ./rebuild > make > make install > > 2. Then Configure aaa_client.cfg > > 17 aaa_realm= 192.160.45 > 18 aaa_fqdn = 192.160.45:1810 > > 21 module_path= usr/local/lib/disc/client/ > 22 module= usr/local/lib/disc/client/print.so > > 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server > 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER > > 42 route= aaa://192.168.0.45:1812;transport=tcp > > # For the Modules I don't know what to do, because I couldn't find any > module!!! Only the print one, but I think I don'tneed it, do I? > > 3. After that I could't not start disc, because I had no File disc.cfg in > /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg to > disc.cfg > > cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg > > 4. Then I start in the Console: > > debian:~# disc > qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 > (size=12) on 1 -th hit > qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 > (size=16) on 1 -th hit > qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 > (size=28) on 1 -th hit > before loading the modules > loading module usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, > 35) called from cfg_parser.c: cfg_getstr(213) > qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c > (size=36) on 1 -th hit > ERROR: load_module: failed to load <usr/local/lib/disc/client/print.so> in > <client/modules>: usr/local/lib/disc/client/print.so: cannot open shared > object file: No such file or directory > FAILED > ERROR (-1): on line 25 > ERROR: cannot init the core > ERROR:AAAClose: AAA library is not initialized > INFO:init_trans_manager: transaction manager stoped! > INFO:destroy_peer_manager: peer manager stoped > INFO:destroy_timer: timer thread stoped > qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: > destroy_aaa_core(576) > qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: > destroy_aaa_core(577) > qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: > cfg_getstr(213) > qm_status (0xb7cab008): > heap size= 1022872 > used= 68, used+overhead=26012, free=996860 > max used (+overhead)= 26040 > dumping all allocked. fragments: > 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 > alloc'd from shm_mem.c: shm_mem_init_mallocs(185) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 > alloc'd from cfg_parser.c: cfg_getstr(213) > start check=f0f0f0f0, end check= c0c0c0c0, abcdefed > dumping free list stats : > hash= 3. fragments no.: 1 > hash= 4. fragments no.: 1 > hash= 521. fragments no.: 1 > ----------------------------- > shm_mem_destroy > destroying the shared memory lock > > > It could not load the module right? But where I can get it? How can I use > disc as Client and Server? I did only the configure for the client! I read > out, that disc only can work as a client or as a server. > > Can someone give me a hint? > > Cheers, Flo > > > > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > -- View this message in context: http://www.nabble.com/I-can%27t-configure-Diameter-Client-Server-%28DISC%29… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

1 0

[OpenSER-Users] I can't configure Diameter Client Server (DISC)
by Florian Schildger 24 Jun '08

24 Jun '08

Hi @ all, I want to built a Diameter-Client and -Server with disc, but it is very tricky. Can someone help me? My plan is, a UA gives an invite to a SIP Express Router, this one forwards the request to a DISC Client, which forwards the request to the DISC Server and authenticate the UA. My first problem is to start the DISC. What I did: 1. Download the disc with cvs and Install it cvs <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617 41099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc login cvs -z3 <http://service.gmx.net/de/cgi/g.fcgi/mail/new?CUSTOMERNO=19451716&t=de13617 41099.1214292288.7541f343&to=-d%3Apserver%3Aanonymous%40cvs.disc.berlios.de> -d:pserver:anonymous@cvs.disc.berlios.de:/cvsroot/disc co disc ./rebuild make make install 2. Then Configure aaa_client.cfg 17 aaa_realm= 192.160.45 18 aaa_fqdn = 192.160.45:1810 21 module_path= usr/local/lib/disc/client/ 22 module= usr/local/lib/disc/client/print.so 32 peer= aaa://192.168.0.45:1812;transport=tcp # Server 33 peer= aaa://192.168.0.45:5060;transport=tcp # SER 42 route= aaa://192.168.0.45:1812;transport=tcp # For the Modules I don't know what to do, because I couldn't find any module!!! Only the print one, but I think I don'tneed it, do I? 3. After that I could't not start disc, because I had no File disc.cfg in /usr/local/etc/disc/disc.cfg. What I did is copy the aaa_client.cfg to disc.cfg cp /usr/local/disc/src/aaa_client.cfg /usr/local/etc/disc/disc.cfg 4. Then I start in the Console: debian:~# disc qm_malloc(0xb7cab008, 11) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 12) returns address 0xb7cb148c frag. 0xb7cb1474 (size=12) on 1 -th hit qm_malloc(0xb7cab008, 16) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 16) returns address 0xb7cb14c8 frag. 0xb7cb14b0 (size=16) on 1 -th hit qm_malloc(0xb7cab008, 27) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 28) returns address 0xb7cb1508 frag. 0xb7cb14f0 (size=28) on 1 -th hit before loading the modules loading module usr/local/lib/disc/client/print.so...qm_malloc(0xb7cab008, 35) called from cfg_parser.c: cfg_getstr(213) qm_malloc(0xb7cab008, 36) returns address 0xb7cb1554 frag. 0xb7cb153c (size=36) on 1 -th hit ERROR: load_module: failed to load <usr/local/lib/disc/client/print.so> in <client/modules>: usr/local/lib/disc/client/print.so: cannot open shared object file: No such file or directory FAILED ERROR (-1): on line 25 ERROR: cannot init the core ERROR:AAAClose: AAA library is not initialized INFO:init_trans_manager: transaction manager stoped! INFO:destroy_peer_manager: peer manager stoped INFO:destroy_timer: timer thread stoped qm_free(0xb7cab008, 0xb7cb148c), called from aaa_core.c: destroy_aaa_core(576) qm_free: freeing frag. 0xb7cb1474 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_free(0xb7cab008, 0xb7cb14c8), called from aaa_core.c: destroy_aaa_core(577) qm_free: freeing frag. 0xb7cb14b0 alloc'ed from cfg_parser.c: cfg_getstr(213) qm_status (0xb7cab008): heap size= 1022872 used= 68, used+overhead=26012, free=996860 max used (+overhead)= 26040 dumping all allocked. fragments: 0. N address=0xb7cb1458 frag=0xb7cb1440 size=4 alloc'd from shm_mem.c: shm_mem_init_mallocs(185) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 3. N address=0xb7cb1508 frag=0xb7cb14f0 size=28 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 4. N address=0xb7cb1554 frag=0xb7cb153c size=36 alloc'd from cfg_parser.c: cfg_getstr(213) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed dumping free list stats : hash= 3. fragments no.: 1 hash= 4. fragments no.: 1 hash= 521. fragments no.: 1 ----------------------------- shm_mem_destroy destroying the shared memory lock He could not load the module right? But where I can get it? How can I use disc as Client and Server? I did only the configure for the client! I read out, that disc only can work as an client or as an server. Can someone give me a hint? Cheers, Flo

1 0

[OpenSER-Users] openser parallel forking
by Chaitanya V.N.S 23 Jun '08

23 Jun '08

Hi, Thanks for replaying. Actually my requirement is, If I make a call to a user all the users logged in with that used id should get that call at the same time. How can I achive it. Thanking you in advance, Chaitanya

3 2

[OpenSER-Users] strip
by David Villasmil 23 Jun '08

23 Jun '08

I've got this route, but openser is not finding the user, I get the call as 7777XXXXXXX. So i strip 4 digits and do a lookup, the user IS online but openser says it can't find him... Could it be that openser is not striping right? if (uri=~"^sip:7777"){ xlog("L_NOTICE", "\n************** GOT CALL FOR IN-SITE ('$tu') ************\n"); strip(4); xlog("L_NOTICE", "\n************** Changing dialed number (Removing 7777) ('$tu') **************\n"); if (!lookup("location")) { sl_send_reply("404", "User Not Online! (In 7777 route)"); exit; }; route(1); } thanks d

1 2

[OpenSER-Users] Openser, freeradius,Mysql and CDRTool config
by Francis Einstein 23 Jun '08

23 Jun '08

Hello! (Sorry for bad english) I'm new on openser and i want to configure openser with freeradius and mysql support. I use : openser 1.2.3 , Mysql 4.11, freeradius 1.1.3 and the latest cdrtool on Fedora core 4. After reading the tuto at http://www.openser.org/docs/openser-radius-1.0.x.html i got a lot of parse error on openser.cfg. it seams that the config file is not suitable for openser v1.2.3, so if someone can send me a config file for freeradius i would be pleased. thanks! _____________________________________________________________________________ Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr

1 0

[OpenSER-Users] Pua crash in subs_cback_func
by Pablo Guijarro Enríquez 23 Jun '08

23 Jun '08

Hi, I am running openser 1.3.1 with pua and pua_xmpp modules and, from time to time, it crashes due to a segmentation fault while processing the response to a SUBSCRIBE from a XMPP user. Below you can see the information provided by the log file and the backtrace of the core generated. If there is something more that could be useful just ask me for it. Any hint on how to solve it will be much appreciated. Thanks in advance, Pablo - Log file: Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:pua:subs_cback_func: completed with status 202 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:receive_msg: After parse_msg... Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:core:parse_headers: flags=200 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:core:parse_headers: flags=ffffffffffffffff Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:forward_reply: found module tm, passing reply to it Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:grep_sock_info: checking if host==us: 10==9 && [cmovil.net] == [127.0.0.1] Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:core:get_hdr_field: found end of header Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:core:get_hdr_field: content_length=0 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:tm:t_check: start=0xffffffff Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:rr:find_first_route: No Route headers found Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:core:get_hdr_field: found end of header Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:parse_headers: flags=22 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:grep_sock_info: checking if host==us: 10==12 && [cmovil.net] == [192.168.1.33] Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:rr:loose_route: There is no Route HF Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:pua:subs_cback_func: lexpire= 180 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:parse_to_param: tag=10.18828.1212990569.29 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:tm:t_newtran: transaction on entrance=0xffffffff Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18827]: DBG:pua:get_dialog: core_hash= 427 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18842]: CRITICAL:core:receive_fd: EOF on 16 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18820]: INFO:core:handle_sigs: child process 18827 exited by a signal 11 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:tm:insert_timer_unsafe: [2]: 0xb5a0a778 (736) Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:parse_headers: this is the first via Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:parse_to: end of header reached, state=29 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18842]: DBG:core:handle_ser_child: dead child 6, pid 18827 (shutting down?) Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18830]: DBG:tm:utimer_routine: timer routine:5,tl=0xb59fe57c next=(nil), timeout=731600000 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18820]: INFO:core:handle_sigs: core was generated Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18826]: DBG:tm:t_unref: UNREF_UNSAFE: after is 0 Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18829]: DBG:core:receive_msg: After parse_msg... Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18828]: DBG:core:parse_to: display={}, ruri={sip:pintoa*gmail.com@gw} Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18842]: DBG:core:io_watch_del: io_watch_del (0x8154c80, 16, -1, 0x0) fd_no=22 called Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18820]: INFO:core:handle_sigs: terminating due to SIGCHLD Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18840]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18842]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18839]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18837]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18838]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18832]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18831]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18830]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18835]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18823]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18825]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18824]: INFO:core:sig_usr: signal 15 received Jun 9 07:49:29 cmovil /usr/local/sbin/openser[18822]: INFO:core:sig_usr: signal 15 received - Backtrace: Core was generated by `/usr/local/sbin/openser -P /var/run/openser.pid -m 64'. Program terminated with signal 11, Segmentation fault. #0 0xb78be14f in subs_cback_func (t=0xb3a538e8, cb_type=256, ps=0xb7ba2234) at send_subscribe.c:454 454 size= sizeof(ua_pres_t)+ 2*sizeof(str)+( pto->uri.len+ (gdb) backtrace #0 0xb78be14f in subs_cback_func (t=0xb3a538e8, cb_type=256, ps=0xb7ba2234) at send_subscribe.c:454 #1 0xb7b7a0d7 in run_trans_callbacks (type=256, trans=0xb3a538e8, req=0x0, rpl=0x818f6f8, code=202) at t_hooks.c:205 #2 0xb7b92cb1 in local_reply (t=0xb3a538e8, p_msg=0x818f6f8, branch=0, msg_status=202, cancel_bitmap=0xbfcc5730) at t_reply.c:1245 #3 0xb7b95844 in reply_received (p_msg=0x818f6f8) at t_reply.c:1384 #4 0x08063e08 in forward_reply (msg=0x818f6f8) at forward.c:499 #5 0x08094372 in receive_msg ( buf=0x8165000 "SIP/2.0 202 OK\r\nVia: SIP/2.0/UDP 192.168.1.33;branch=z9hG4bKb79c.15401d07.0\r\nTo: sip:jesus@cmovil.net;tag=10.16365.1213770124.16\r\nFrom: sip:jveglop*gmail.com@gw;tag=533cb9e91f4b999cf76861cbb9ed54ed-55"..., len=368, rcv_info=0xbfcc5864) at receive.c:194 #6 0x080d4063 in udp_rcv_loop () at udp_server.c:438 #7 0x0806c506 in main (argc=5, argv=0xbfcc5a44) at main.c:834

2 2

[OpenSER-Users] Parallel forking
by Chaitanya V.N.S 23 Jun '08

23 Jun '08

Hi everyone, When i call a user all the clents logged in with that user-id should get the Invite message. Is this possible using parallel forking. If so, how can I implemnt parallel forking. Thanks in advance Chaitanya

2 1

[OpenSER-Users] OpenSer not matching a correct reply to its transaction ???
by Iñaki Baz Castillo 22 Jun '08

22 Jun '08

Hi, I'm experimenting a annoying problem since it seems that my OpenSer, sometimes, doesn't match correct replies from my gateway to client transactions initiated by OpenSer. AFAIK all is correct but OpenSer doesn't match the "100 Trying", neither the "183" and ends the transactoion after "fr_timer" (and before it OpenSer sends INVITE retransmissions). The following is n example of non mathed response. I can't understand why, the top branch matches and also the CSeq (as RFC 3261 17.1.3 indicates): INVITE from OpenSer to gateway: --------------------------- INVITE sip:0034687105267@66.44.0.144 SIP/2.0 Record-Route: <sip:88.99.3.10;lr=on;ftag=as5fc7617f> Via: SIP/2.0/UDP 88.99.3.10;branch=z9hG4bK87ab.47b6f072.0 Via: SIP/2.0/UDP 192.168.1.203:5060;received=88.99.1.192;branch=z9hG4bK20b50ef9;rport=10000 From: <sip:202@sip.domain.net>;tag=as5fc7617f To: <sip:XXXXXXXXX@sip.domain.net> Contact: <sip:202@88.99.1.192:10000> Call-ID: 70af31e43126fa0917146b5523ea4add(a)sip.domain.net CSeq: 103 INVITE User-Agent: domain - Asterisk PBX Max-Forwards: 69 Date: Thu, 19 Jun 2008 10:45:03 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Supported: replaces Content-Type: application/sdp Content-Length: 284 X-Called-E164: +34XXXXXXXXX P-Asserted-Identity: <sip:XXXXXXXXX@88.99.3.10> v=0 o=root 1468 1469 IN IP4 192.168.1.203 s=session c=IN IP4 88.99.3.10 t=0 0 m=audio 60884 RTP/AVP 8 18 101 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - a=ptime:20 a=sendrecv ----------------------------------------------- "100 Trying" from gateway ----------------------------------------------- SIP/2.0 100 Trying From: <sip:202@sip.domain.net>;tag=as5fc7617f To: <sip:XXXXXXXXX@sip.domain.net>;tag=5ad3254683132008619125120 Call-ID: 70af31e43126fa0917146b5523ea4add(a)sip.domain.net CSeq: 103 INVITE Allow: ACK,BYE,CANCEL,INVITE,OPTIONS,INFO,SUBSCRIBE,REFER,NOTIFY,PRACK Via: SIP/2.0/UDP 88.99.3.10;branch=z9hG4bK87ab.47b6f072.0 Via: SIP/2.0/UDP 192.168.1.203:5060;received=88.99.1.192;rport=10000;branch=z9hG4bK20b50ef9 Contact: <sip:66.44.0.144:5060;transport=UDP> Content-Length: 0 ----------------------------------------------- This just occurs some times (3% of outgoing calls, that's really enough). I'm using OpenSer 1.3.2 complied in Debian Etch as deb package and of course use t_relay(). Any idea? IMHO this error doesn't make sense :( -- Iñaki Baz Castillo ibc(a)in.ilimit.es

4 4

[OpenSER-Users] OpenSER Proxy & Presence Server
by Ross Beer 21 Jun '08

21 Jun '08

Hi, I have a working OpenSER Proxy to asterisk and would like the proxy server to handle Presence. I have tried adding all of the usual presence code, however it seams that messages are not getting back to the clients. I can see time outs in the SIP messages. Can anyone see what has gone wrong with this code? The setup is: Calls & Registrations: Client --> OpenSER --> Asterisk SIP Messages & Presence: Client --> OpenSER Thank you for your help in advance. Ross ----------------------------- CONFIG ---------------------- # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #/* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes #*/ check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=udp:<IP>:5065 #port=5065 children=4 # --- module loading mpath="/usr/local/lib64/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "mi_fifo.so" loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "xcap_client.so" loadmodule "avpops.so" #loadmodule "siptrace.so" # --- setting module parameters # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc|auth_db|presence|presence_xml|xcap_client","db_url","mysql://openser:openserrw@<address>/openser") # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6) # -- registrar params -- modparam("registrar|nathelper", "received_avp", "$avp(i:42)") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper params --- modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7890") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:<address>") # -- presence parameters --- modparam("presence", "max_expires", 3600) modparam("presence", "server_address", "sip:<IP>:5065" ) modparam("xcap_client", "periodical_query", 0) modparam("xcap_client", "query_period", 50) modparam("presence_xml", "integrated_xcap_server", 1) #modparam("presence_xml", "xcap_server", "") modparam("presence","fallback2db",1) #modparam("siptrace", "trace_flag", 0) #modparam("siptrace", "trace_on", 1) #modparam("siptrace", "table", "sip_trace") # --- main routing logic route { ###################################################### # CHECK FOR BAD SIP MESSAGES # ###################################################### if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; ###################################################### # CHECK FOR CLIENT BEHIND A NAT ROUTER # ###################################################### route(2); if (!method=="REGISTER") record_route(); ###################################################### # PROCESS SUBSCRIBE & NOTIFY MESSAGES # ###################################################### if(method=="PUBLISH") { route(4); } if(method=="SUBSCRIBE") { route(4); } if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; ##################################################### # SAVE LOCATION OF CLIENT FOR MESSAGES # ##################################################### if (method=="REGISTER") { save("location","0x02"); } #################################################### # CHECK IF REGISTERED LOCALY ELSE PASS TO ASTERISK # #################################################### if (!lookup("location")) { append_hf("P-hint: outbound\r\n"); } else { append_hf("P-hint: usrloc applied\r\n"); } route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")) { force_rtp_proxy(); t_on_failure("2"); }; if (isflagset(5)) { search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); } t_on_reply("1"); } route[4] { # absorb retransmissions if (! t_newtran()) { sl_reply_error(); exit; }; if(is_method("PUBLISH")) { if($hdr(Sender)!= NULL) { handle_publish("$hdr(Sender)"); } else { handle_publish(); } t_release(); } if(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); }; exit; } branch_route[4] { log("new branch at $ru\n"); } onreply_route[4] { log("incoming reply\n"); } failure_route[2] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])" && is_method("INVITE")) { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } _________________________________________________________________ http://clk.atdmt.com/UKM/go/msnnkmgl0010000002ukm/direct/01/

3 2

[OpenSER-Users] Loading user preferences using avp_load_radius
by Ruchir 21 Jun '08

21 Jun '08

Hi Everyone, I have a problem. I use avp_load_radius to load caller or callee preferences and use them. But when I do call forwarding, it will load original caller's preferences for further processing instead of the user who has configured call forwarding. Ideally we should load the preferences of the user who forwarded the call as caller preferences. We can do this using avp_db_load but I think there should be provision in avp_load_radius as well. Currently it supports "caller", "callee" & "digest". I think it should support parameters same as avp_db_load. Let me know your thoughts about this.

2 2

[OpenSER-Users] Perl module autoload.
by Alex Balashov 20 Jun '08

20 Jun '08

Perhaps this has been asked before, but where are all these core and module functions that the Perl module documentation alleges to be exposed via "autoload"? When I try to run any of them as methods of the OpenSER object, the Perl module tells me they exist but are unavailable, or something to that general effect. So, for now, the only use I get out of the perl module is to be able to communicate to the OpenSER route plan via setting AVPs. Is this going to change any time soon? Will functions like $m->rewrite_ruri() eventually work? Or am I missing some kind of autoload option? -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : (+1) (678) 954-0670 Direct : (+1) (678) 954-0671 Mobile : (+1) (706) 338-8599

2 1

[OpenSER-Users] setting caller id in FROM
by David Villasmil 20 Jun '08

20 Jun '08

Hello all, I'm required to set a specific caller id on an outbound call. I've tried with P-Asserted-Id but it seems the carrier wants me to change the FROM-URI, I'm trying to set $fU but I get an error saying: line 380, column 17-18: invalid left operand in assignment So I assume $fU is not readable? How do i change it? thanks

4 4

[OpenSER-Users] About openser redirect - forward
by Valerio Di Marino 20 Jun '08

20 Jun '08

Hi to all, I am able to start correctly openser, using mysql for authentication and user location. Then, I would configure redirect, but I don't know how. I have this situation: Internal network behind parallel NAT (any port open) Possibility to have a public IP Users should authenticate on openser, to being redirect (or forwarded ?) all to a single SIP provider, using the same credentials. As you can see, I an not clear if I have to use redirect or forward (I suspect forward). Is it possible ? Can you help me, suggesting also a possible configuration ? Thanks to all. Valerio

2 1

[OpenSER-Users] OpenSER Proxy to Asterisk & MESSAGE handler
by Ross Beer 20 Jun '08

20 Jun '08

Hi All, I am using OpenSER as a NAT proxy for asterisk and would like to use it to deliver SIP 'MESSAGES' between clients. At the moment I have the following configuration however messages are not being sent to the other clients. Instead they are being passed to asterisk. I would be very grateful if anyone could point me in the right direction. Ross ---------- Config -------------- debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) #/* Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes #*/ check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5065 children=4 # --- module loading mpath="/usr/local/lib64/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "mi_fifo.so" # --- setting module parameters # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc|auth_db","db_url","<MYSQL CONNECTION STRING>") # -- usrloc params -- modparam("usrloc", "db_mode", 2) modparam("usrloc", "nat_bflag", 6) # -- registrar params -- modparam("registrar|nathelper", "received_avp", "$avp(i:42)") # -- auth params -- modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper params --- modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7890") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:<ADDRESS>") # --- main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # NAT detection route(2); if (!method=="REGISTER") { record_route(); } if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }; if (isflagset(5)) { # set branch flag -- when someone will call this user # the INVITE will have branch flag 6 set after lookup("location") setbflag(6); # if you want OPTIONS natpings uncomment next # setbflag(7); }; save("location"); exit; }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; if(method=="MESSAGE") { if (!lookup("location")) { sl_send_reply("404", "User Offline"); exit; } route(4); } if (method=="REGISTER") { save("location"); } route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")) { force_rtp_proxy(); t_on_failure("2"); }; if (isflagset(5)) { search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); } t_on_reply("1"); } route[4] { if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[2] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])" && is_method("INVITE")) { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } ---------- End Config -------------- _________________________________________________________________ http://clk.atdmt.com/UKM/go/msnnkmgl0010000007ukm/direct/01/

2 1

[OpenSER-Users] Resolved: OpenSER Proxy to Asterisk & MESSAGE handler
by Ross Beer 20 Jun '08

20 Jun '08

Hi, I have resolved the issue I was having. Just used 'save and no reply' instead of just save. Thanks! Ross _________________________________________________________________ http://clk.atdmt.com/UKM/go/msnnkmgl0010000002ukm/direct/01/

1 0

[OpenSER-Users] Doubt about OpenSER REGISTER by third-party
by Marcio 20 Jun '08

20 Jun '08

Hi all, I have a doubt, about to constructing a REGISTER Request by third-party, if is possible with OpenSER`s modules??? and how? If can to force a "Proxy A", to perform a Register of the UAc on behalf of an UAc to Proxy/Registrar "B".... 10.2 item rfc3261....."Registration on behalf of a particular address-of-record can be performed by a suitably authorized third party."... best regards, Marcio

2 2

[OpenSER-Users] NEW FEATURE: dialog profiling
by Bogdan-Andrei Iancu 20 Jun '08

20 Jun '08

Hi, I just committed in SVN trunk (1.4, next major release) support for dialog profiling. What dialog profiling is ========================= Dialog profiling is a mechanism that helps in classifying, sorting and keeping trace of certain types of dialogs, using whatever properties of the dialog (like caller, destination, type of calls, etc). Dialogs can be dynamically added in different (and several) profile tables - logically, each profile table can have a special meaning (like dialogs outside the domain, dialogs terminated to PSTN, etc). Information provided by the profiles can be used also for doing real load-balancing - by real, I mean routing decisions based on load. So far dispatcher module can do probabilistic dispatching with no feedback on the actual load of the peer (or about the call success). See example 3 - load balancing between 2 asterisk boxes with identical capacities. Being able to actually trace the ongoing dialog, gives liberty to do more complex routing logics. There are two types of profiles: * with no value - a dialog simply belongs to a profile. (like outbound calls profile). There is no other additional information to describe the dialog's belonging to the profile; * with value - a dialog belongs to a profile having a certain value (like in caller profile, where the value is the caller ID). The belonging of the dialog to the profile is strictly related to the value. A dialog can be added to multiple profiles in the same time. What it should be used for =========================== Example 1: Count the calls terminating to PSTN in order to monitor the load. Before routing the call the GW, check if the number of ongoing calls (to the GW) do not exceed some value. modparam("dialog","profiles_no_value","pstn_calls") .... /* do some checking */ get_dialog_size("pstn_calls","$avp(cnt)"); if ( $avp(cnt) > 32 ) { sl_send_reply("500","GW full"); exit; } set_dlg_profile("pstn_calls"); /* route to the GW */ ..... Example 2: Allow only 2 parallel calls per user - use a profile with value to count the outgoing calls for each subscriber modparam("dialog","profiles_with_value","caller") .... /* do some checking */ get_dialog_size("caller","$fu","$avp(cnt)"); if ( $avp(cnt) > 2 ) { sl_send_reply("403","Not allowed"); exit; } set_dlg_profile("caller","$fu"); /* route the call */ ..... Example 3: Do load balancing between 2 asterisk boxes with identical capacities - use a profile with values to count the ongoing calls through each Asterisk box. modparam("dialog","profiles_with_value","asterisk") .... /* do some checking */ get_dialog_size("asterisk","box1","$avp(cnt1)"); get_dialog_size("asterisk","box2","$avp(cnt2)"); if ( $avp(cnt1) > $avp(cnt2) ) { setdsturi("sip:IP_BOX2:PORT_BOX2"); set_dlg_profile("asterisk","box2"); } else { setdsturi("sip:IP_BOX1:PORT_BOX1"); set_dlg_profile("asterisk","box1"); } /* route the call */ ..... Of course, this can be extended for asymmetric load or for multiple boxes. Regards, Bogdan

2 3

[OpenSER-Users] Does OpenSer allow a response after "fr_timer" going upstream?
by Iñaki Baz Castillo 20 Jun '08

20 Jun '08

Hi, I'm experimenting problems with my carrier gateway since sometimes it doesn't reply "100 Trying" in several seconds. I set "fr_timer" to 12 seconds so after this time the transaction is closed. In case the response ("100 Trying") arrives more than "fr_timer" seconds to OpenSer, does OpenSer forward it upstream as RFC3261 indicates? or does Openser drop it? Thanks. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 7

[Serusers] rtpproxy - voice problem
by dim_hatzi 20 Jun '08

20 Jun '08

Hi everybody, I have managed (finally) to build a Sip proxy server for my studies, using SER 0.9.6 , with MySQL support , but I am facing a problem. Everything works fine with the softphones I use, exept the voice.The registration works fine, the IM works fine, but when a user is trying to speak to the other, something is wrong(only in my local network, without NAT, the voice communication is working). My laptop, in which I have installed SER , is behind a router.(My ser.cfg supports Nathelper module). 1)Should I connect it directly with public ip ? 2)I tried to use rtpproxy, but I am a little bit confused. Can I install it in the same machine ? What are the parameters of rtpproxy ? I have attached my ser.cfg Any help will be appreciated Dimitris - Greece

1 0

[Serusers] Prefix "+"
by Strassburger, Patrick 20 Jun '08

20 Jun '08

Hi all, Am sure this is an easy question but I do not get it resolved. I tried to modify the uri to add a "+" in front of the called number. A "prefix ("+");" does not work while a "prefix ("00"); adds additional zeroes. Is prefix limited to digits only? Kind regards Patrick ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

2 1

[OpenSER-Users] LCR prefix
by David Villasmil 20 Jun '08

20 Jun '08

Hello all! Can LCR's module's "prefix" field (on the lcr table) be a regular expression? i.e. "+[56]1" thanks David

2 1

[Serusers] fake RBT
by Ivo Kirilov 20 Jun '08

20 Jun '08

Hello, I have an issue with fake ring back tone. When I dial any number no matter from carrier I got fake ring tone. As newbie I'm not sure, where to start from, to fix this issue. I suppose I have to change something in ser.conf but I'm not sure where and what. Any ideas will be appreciated. Thank you in advance. Ivo

1 0

[OpenSER-Users] Caching REGISTER
by Julien mangeard 20 Jun '08

20 Jun '08

Hi, I try to use Openser for caching REGISTER requests. Openser server is between UA and SIP registrar server. First register : The UA sends a REGISTER request. Openser server changes the expire value (with bigger value) and it relays these request to the SIP registrar server. SIP registrar server responses with a challenge. The Openser relays this challenge to the UA. The UA reponses to this challenge. The Openser relays the message to the SIP registrar server. When the SIP registrar server responses with "200 OK", Openser server add a record in it own location database. Second register : The UA send a REGISTER request. The UA is in the Openser location database and the session is not expire. Openser responses "200 OK" without forwarding the request to SIP registrar server. I've make a schema with the expected registration flow : http://img225.imageshack.us/img225/930/registerlj0.png. What do you think about it ? Can I do this kind of configuration with existing Openser module ? Best Regards, -- Julien Mangeard 06.84.39.57.78 -- Julien Mangeard 06.84.39.57.78

2 2

[Serusers] SER-0.9.7_plus_MySQL_solaris10_x86
by muhammad akl 20 Jun '08

20 Jun '08

Hey All , Today i have finished writing a tutorial for setting up SER-0.9.7 and MySQL5 on Solaris10_x86 architecture . the compilation process was done on two both releases of Solaris10 : Release 11/2006 Release 08/2007 hope it help and solve most of the common problems for Solaris10 users The file can be download from this link : http://muhammad.akl.googlepages.com/SER-Mysql5-Solaris10-v1.0.pdf regards muhammad

2 2

[Serusers] RTPproxy 1.1 has been released
by Maxim Sobolev 20 Jun '08

20 Jun '08

Hi everybody! Just a quick note that a new stable version 1.1 of RTPproxy has been released. The new release includes performance enhancements and several new features. It's available immediately at http://www.rtpproxy.org. Detailed release notes are here: http://www.b2bua.org/wiki/RTPproxy/RELENG_1_1_0_NOTES Regards, -- Maksym Sobolyev Sippy Software, Inc. Internet Telephony (VoIP) Experts T/F: +1-646-651-1110 Web: http://www.sippysoft.com

1 0

[Serusers] WG: Prefix "+"
by Strassburger, Patrick 20 Jun '08

20 Jun '08

Hi all, Please ignore my previous mail - I can see the "+" now by doing "prefix ("+");". Thanks Patrick > -----Ursprüngliche Nachricht----- > Von: Strassburger, Patrick > Gesendet: Freitag, 20. Juni 2008 10:37 > An: serusers(a)lists.iptel.org > Betreff: Prefix "+" > > Hi all, > > Am sure this is an easy question but I do not get it resolved. > I tried to modify the uri to add a "+" in front of the called number. > A "prefix ("+");" does not work while a "prefix ("00"); adds additional zeroes. > Is prefix limited to digits only? > > Kind regards > Patrick ************************************************************************************* The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing security(a)colt.net and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.

1 0

[OpenSER-Users] is xmpp module documentation up to date?
by jh＠tutpro.com 20 Jun '08

20 Jun '08

i was reading xmpp module documentation and it has this in overview section: This modules is a gateway between Openser and a jabber server. It enables the exchange of instant messages between SIP clients and XMPP(jabber) clients. however, when i look at the code, it also includes xmpp_send_xsubscribe and xmpp_send_xnotify api functions. also, it seems that pua_xmpp is using these (undocumented) api functions. am i missing something or is the api documentation missing in xmpp docs? -- juha

2 1

[OpenSER-Users] Memory Leak in Openser-1.1.1-notls
by Dilip 20 Jun '08

20 Jun '08

Hello evryone, I am working with the auth_radius module. In the openser it gives me that still reachable memory in memory log file of valgrind. It gives the 127 blocks which is still reachable. I have attched that file here.Plz Find it. U can view this file using "alleyoop" command. Then it gives the memory still reachable in openser. So Please help me. Regards, Dilip ==4347== Memcheck, a memory error detector. ==4347== Copyright (C) 2002-2006, and GNU GPL'd, by Julian Seward et al. ==4347== Using LibVEX rev 1658, a library for dynamic binary translation. ==4347== Copyright (C) 2004-2006, and GNU GPL'd, by OpenWorks LLP. ==4347== Using valgrind-3.2.1, a dynamic binary instrumentation framework. ==4347== Copyright (C) 2000-2006, and GNU GPL'd, by Julian Seward et al. ==4347== For more details, rerun with: -v ==4347== ==4347== My PID = 4347, parent PID = 2679. Prog and args are: ==4347== openser ==4347== ==4347== ==4347== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 64 from 1) ==4347== malloc/free: in use at exit: 51,730 bytes in 127 blocks. ==4347== malloc/free: 999 allocs, 872 frees, 197,054 bytes allocated. ==4347== For counts of detected errors, rerun with: -v ==4347== searching for pointers to 127 not-freed blocks. ==4348== ==4348== ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 64 from 1) ==4348== malloc/free: in use at exit: 51,730 bytes in 127 blocks. ==4348== malloc/free: 999 allocs, 872 frees, 197,054 bytes allocated. ==4348== For counts of detected errors, rerun with: -v ==4348== searching for pointers to 127 not-freed blocks. ==4347== checked 35,928,224 bytes. ==4347== ==4347== 16 bytes in 2 blocks are still reachable in loss record 1 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E06807: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4347== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== ==4347== ==4347== 21 bytes in 2 blocks are still reachable in loss record 2 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3842275EC1: strdup (in /lib64/libc-2.5.so) ==4347== by 0x42922F: set_mod_param_regex (modparam.c:118) ==4347== by 0x4959B8: yyparse (cfg.y:909) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== ==4347== 56 bytes in 1 blocks are still reachable in loss record 3 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x48B931: yy_create_buffer (lex.yy.c:3472) ==4347== by 0x48C037: yylex (lex.yy.c:1492) ==4347== by 0x492FFF: yyparse (cfg.tab.c:2702) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== ==4347== 294 bytes in 12 blocks are still reachable in loss record 4 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E09EE5: _dl_new_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4347== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== ==4347== ==4347== 294 bytes in 12 blocks are still reachable in loss record 5 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E08145: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== ==4347== ==4347== 513 bytes in 12 blocks are still reachable in loss record 6 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E09EE5: _dl_new_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4347== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== ==4347== ==4347== 513 bytes in 12 blocks are still reachable in loss record 7 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E07033: expand_dynamic_string_token (in /lib64/ld-2.5.so) ==4347== by 0x3841E07C15: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== by 0x49A67F: yyparse (cfg.y:902) ==4347== ==4347== ==4347== 568 bytes in 1 blocks are still reachable in loss record 8 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x384225F119: __fopen_internal (in /lib64/libc-2.5.so) ==4347== by 0x42618A: main (main.c:1267) ==4347== ==4347== ==4347== 928 bytes in 12 blocks are still reachable in loss record 9 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E0B913: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== by 0x49A67F: yyparse (cfg.y:902) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== ==4347== 944 bytes in 12 blocks are still reachable in loss record 10 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x3841E0B793: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== by 0x49A67F: yyparse (cfg.y:902) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== ==4347== 3,048 bytes in 24 blocks are still reachable in loss record 11 of 14 ==4347== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4347== by 0x3841E0E675: _dl_check_map_versions (in /lib64/ld-2.5.so) ==4347== by 0x3841E10D98: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== by 0x49A67F: yyparse (cfg.y:902) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== ==4347== 13,908 bytes in 12 blocks are still reachable in loss record 12 of 14 ==4347== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4347== by 0x3841E09C8B: _dl_new_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4347== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4347== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== ==4347== ==4347== 14,241 bytes in 12 blocks are still reachable in loss record 13 of 14 ==4347== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4347== by 0x3841E09C8B: _dl_new_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4347== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4347== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4347== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4347== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4347== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4347== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4347== by 0x44B816: load_module (sr_module.c:207) ==4347== ==4347== ==4347== 16,386 bytes in 1 blocks are still reachable in loss record 14 of 14 ==4347== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4347== by 0x48B948: yy_create_buffer (lex.yy.c:3472) ==4347== by 0x48C037: yylex (lex.yy.c:1492) ==4347== by 0x492FFF: yyparse (cfg.tab.c:2702) ==4347== by 0x4262BC: main (main.c:1307) ==4347== ==4347== LEAK SUMMARY: ==4347== definitely lost: 0 bytes in 0 blocks. ==4347== possibly lost: 0 bytes in 0 blocks. ==4347== still reachable: 51,730 bytes in 127 blocks. ==4347== suppressed: 0 bytes in 0 blocks. ==4349== Invalid read of size 4 ==4349== at 0x5FFC8C5: mod_init (authdb_mod.c:176) ==4349== by 0x44AC9C: init_mod (sr_module.c:435) ==4349== by 0x44AC55: init_mod (sr_module.c:432) ==4349== by 0x44AC55: init_mod (sr_module.c:432) ==4349== by 0x426F9A: main (main.c:1466) ==4349== Address 0x4C611A0 is 8 bytes inside a block of size 9 alloc'd ==4349== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4349== by 0x3842275EC1: strdup (in /lib64/libc-2.5.so) ==4349== by 0x42922F: set_mod_param_regex (modparam.c:118) ==4349== by 0x4959B8: yyparse (cfg.y:909) ==4349== by 0x4262BC: main (main.c:1307) ==4349== ==4349== Invalid read of size 4 ==4349== at 0x5FFC935: mod_init (authdb_mod.c:177) ==4349== by 0x44AC9C: init_mod (sr_module.c:435) ==4349== by 0x44AC55: init_mod (sr_module.c:432) ==4349== by 0x44AC55: init_mod (sr_module.c:432) ==4349== by 0x426F9A: main (main.c:1466) ==4349== Address 0x4C611A0 is 8 bytes inside a block of size 9 alloc'd ==4349== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4349== by 0x3842275EC1: strdup (in /lib64/libc-2.5.so) ==4349== by 0x42922F: set_mod_param_regex (modparam.c:118) ==4349== by 0x4959B8: yyparse (cfg.y:909) ==4349== by 0x4262BC: main (main.c:1307) ==4348== checked 35,928,224 bytes. ==4348== ==4348== 16 bytes in 2 blocks are still reachable in loss record 1 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E06807: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4348== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== ==4348== ==4348== 21 bytes in 2 blocks are still reachable in loss record 2 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3842275EC1: strdup (in /lib64/libc-2.5.so) ==4348== by 0x42922F: set_mod_param_regex (modparam.c:118) ==4348== by 0x4959B8: yyparse (cfg.y:909) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== ==4348== 56 bytes in 1 blocks are still reachable in loss record 3 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x48B931: yy_create_buffer (lex.yy.c:3472) ==4348== by 0x48C037: yylex (lex.yy.c:1492) ==4348== by 0x492FFF: yyparse (cfg.tab.c:2702) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== ==4348== 294 bytes in 12 blocks are still reachable in loss record 4 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E09EE5: _dl_new_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4348== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== ==4348== ==4348== 294 bytes in 12 blocks are still reachable in loss record 5 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E08145: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== ==4348== ==4348== 513 bytes in 12 blocks are still reachable in loss record 6 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E09EE5: _dl_new_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4348== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== ==4348== ==4348== 513 bytes in 12 blocks are still reachable in loss record 7 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E07033: expand_dynamic_string_token (in /lib64/ld-2.5.so) ==4348== by 0x3841E07C15: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== by 0x49A67F: yyparse (cfg.y:902) ==4348== ==4348== ==4348== 568 bytes in 1 blocks are still reachable in loss record 8 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x384225F119: __fopen_internal (in /lib64/libc-2.5.so) ==4348== by 0x42618A: main (main.c:1267) ==4348== ==4348== ==4348== 928 bytes in 12 blocks are still reachable in loss record 9 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E0B913: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== by 0x49A67F: yyparse (cfg.y:902) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== ==4348== 944 bytes in 12 blocks are still reachable in loss record 10 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x3841E0B793: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== by 0x49A67F: yyparse (cfg.y:902) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== ==4348== 3,048 bytes in 24 blocks are still reachable in loss record 11 of 14 ==4348== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4348== by 0x3841E0E675: _dl_check_map_versions (in /lib64/ld-2.5.so) ==4348== by 0x3841E10D98: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== by 0x49A67F: yyparse (cfg.y:902) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== ==4348== 13,908 bytes in 12 blocks are still reachable in loss record 12 of 14 ==4348== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4348== by 0x3841E09C8B: _dl_new_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4348== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B01C: openaux (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E0B6E5: _dl_map_object_deps (in /lib64/ld-2.5.so) ==4348== by 0x3841E10AFC: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== ==4348== ==4348== 14,241 bytes in 12 blocks are still reachable in loss record 13 of 14 ==4348== at 0x4A04BA2: calloc (vg_replace_malloc.c:279) ==4348== by 0x3841E09C8B: _dl_new_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E05ACB: _dl_map_object_from_fd (in /lib64/ld-2.5.so) ==4348== by 0x3841E07CC2: _dl_map_object (in /lib64/ld-2.5.so) ==4348== by 0x3841E10A9C: dl_open_worker (in /lib64/ld-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3841E1048B: _dl_open (in /lib64/ld-2.5.so) ==4348== by 0x3842A00F99: dlopen_doit (in /lib64/libdl-2.5.so) ==4348== by 0x3841E0CCE5: _dl_catch_error (in /lib64/ld-2.5.so) ==4348== by 0x3842A0150C: _dlerror_run (in /lib64/libdl-2.5.so) ==4348== by 0x3842A00F10: dlopen@@GLIBC_2.2.5 (in /lib64/libdl-2.5.so) ==4348== by 0x44B816: load_module (sr_module.c:207) ==4348== ==4348== ==4348== 16,386 bytes in 1 blocks are still reachable in loss record 14 of 14 ==4348== at 0x4A05879: malloc (vg_replace_malloc.c:149) ==4348== by 0x48B948: yy_create_buffer (lex.yy.c:3472) ==4348== by 0x48C037: yylex (lex.yy.c:1492) ==4348== by 0x492FFF: yyparse (cfg.tab.c:2702) ==4348== by 0x4262BC: main (main.c:1307) ==4348== ==4348== LEAK SUMMARY: ==4348== definitely lost: 0 bytes in 0 blocks. ==4348== possibly lost: 0 bytes in 0 blocks. ==4348== still reachable: 51,730 bytes in 127 blocks. ==4348== suppressed: 0 bytes in 0 blocks.

2 1

[OpenSER-Users] Playing the recorded RTP Session
by Chaitanya V.N.S 20 Jun '08

20 Jun '08

Hi, I added NATHelper module to openser and used RTP proxy I am also able to record the RTP session (Conersation between tow calls) using start_recording(); The rtp proxy is recording the conversation in file with rtp extenssion. The problem is with palying that rtp file. Can any one say me how to play that file. Thanks in advance, Chiatu.

1 0

[OpenSER-Users] session timer behavior (sst)
by William Quan 19 Jun '08

19 Jun '08

Hi all, I have a simple (SIP Session Timer) sst call where 'Session-Expires' header (SE ) is present in the INVITE but not in the 200 OK constructed at the UAC. This indicates UAS does not support sst. 1. According to the spec (RFC4028), the stateful proxy remembers that SE was in the request, and adds the SE header to the 200OK, but fails to add the Require header (its not initially present either). Is there a way to modify the config to add a 'Require' header to a response when the session expires header was inserted by sst ? 2. Similarly in the mid-call 'refresh' txn, the addition of the SE header to the response does not work for me (v1.3.2). Shouldn't it automatically insert the SE header into the 200, like it did during call setup? When the SE is absent in the response the sst feature is thereafter disabled right? http://tools.ietf.org/html/rfc4028#section-8.2 -will

3 3

[OpenSER-Users] peering module
by Klaus Darilion 19 Jun '08

19 Jun '08

Hi! I wonder if the new peering module is using a certain standard (which one?) or is a proprietary format used between openser and the radius server? regards klaus

2 1

[OpenSER-Users] [OT] DMTF question (rfc2833)
by Lucio Maciel 19 Jun '08

19 Jun '08

Hi, This is offtopic, but maybe someone could help me. I have a problem with a costumer sending the DTMF via RTPEvent. They are sending just one packet per event, with the END bit set and the duration of the event, but some carriers are no recognizing this Event, only if you keep sending rtp events with the duration and then send a final event with the END bit set. This is valid, to send just one event with duration and END bit??? No. Time Source Destination Protocol Info 3 0.026233 xxx.xx.xxx.xx yyy.y.yyy.y RTP EVENT Payload type=RTP Event, DTMF Two 2 (end) Frame 3 (62 bytes on wire, 62 bytes captured) Internet Protocol, Src: xxx.xx.xxx.xx (xxx.xx.xxx.xx), Dst: yyy.y.yyy.y (yyy.y.yyy.y) User Datagram Protocol, Src Port: pxc-spvr (4006), Dst Port: 13018 (13018) Real-Time Transport Protocol 10.. .... = Version: RFC 1889 Version (2) ..0. .... = Padding: False ...0 .... = Extension: False .... 0000 = Contributing source identifiers count: 0 0... .... = Marker: False Payload type: Unknown (101) Sequence number: 51289 Timestamp: 1479952026 Synchronization Source identifier: 0x43256a7a (1126525562) RFC 2833 RTP Event Event ID: DTMF Two 2 (2) 1... .... = End of Event: True .0.. .... = Reserved: False ..00 0000 = Volume: 0 Event Duration: 1200 Thanks. -- Lucio Maciel <lucio(a)tesatelecom.com>

1 0

[OpenSER-Users] About Callback Option
by Ali Jawad 19 Jun '08

19 Jun '08

Hi All Dear All is there a way to implement callback features in Openser ? Thanks

3 2

[OpenSER-Users] Doubt about REGISTER by Third-party with OpenSER
by Marcio 19 Jun '08

19 Jun '08

Hi all again....someone could explain me? I have a doubt, about to constructing a REGISTER Request by third-party, if is possible with OpenSER`s modules??? and how? If can force a "Proxy A" to forward "Register" of the UAc to Proxy/Reg"B" on behalf of an UAc to Proxy/Registrar "B" directly... UAc(B) -----> Proxy/Registrar(A) ------------->Proxy/Registrar(B) 10.2 item rfc3261....."Registration on behalf of a particular address-of-record can be performed by a suitably authorized * third party*."... best regards, Marcio

2 1

[OpenSER-Users] rtpproxy with openser and asterisk
by Martin-Gruber.External＠infineon.com 19 Jun '08

19 Jun '08

hi guys, I have the following scenario. I want to use Asterisk as voicemailserver, but need an rtp-Proxy because the my phone speaks srtp. I get SIP-Message from an PBX to openser and RTP Proxy. My question now is, how I can handle this case or how I can forward from rtpproxy to asterisk? just with rewritehostport? thanks in advance! regards Martin

5 5

[OpenSER-Users] credentials not filled properly
by David Villasmil 19 Jun '08

19 Jun '08

anyone knows what this means? ERROR:auth:pre_auth: received credentials are not filled properly thansk!

2 1

[Serusers] Gentilini, Paul is out of the office.
by PGentilini＠intellicare.com 18 Jun '08

18 Jun '08

I will be out of the office starting 06/17/2008 and will not return until 06/20/2008. I will have very limited access to mail, so please contact the CSC at 888-899-4227 if you need immediate assistance.

1 0

[OpenSER-Users] Openser crash if using invalid flag in t_relay
by Ruchir 18 Jun '08

18 Jun '08

I had put t_relay("0x05") in relay route. When I test calling, openser dies with seg. fault at the time of t_relay. I found that allowed values are 0x01, 0x02 & 0x04 only but openser should generate error while starting in this case.

2 4

[OpenSER-Users] cdrtool billing
by Adrian Georgescu 18 Jun '08

18 Jun '08

David, When $RatingEngine['split_rating_table'] setting is true, after changing the rates in the web interface or by importing them, you must run the script from scripts/splitRatingTables.php to split the central billing_rates table into individual tables for each rate id. You do not need this feature if you have less than 100K rates in your system. Adrian On Mon, Jun 16, 2008 at 5:55 PM, Iñaki Baz Castillo <ibc at in.ilimit.es> wrote: > El Monday 16 June 2008 17:44:56 David Villasmil escribió: > > > But as it happens, when you specify a profile like I did: billing profile > > is NORMAL, but RATE NAME is 1, then you MUST CREATE A TABLE CALLED > > "BILLING_RATES_1", I don't know if cdrtool is supposed to create it but > > didn't do it for me. I had to manually create the table: > > What about if you don't use numeric values as Rate Id? > I use Rate id with textual value ("Reducida", "Normal"...) and had not your > problem. > At least in my case, it doesn't find the rate... Same thing, I had to create the table... without creating the table: Jun 16 12:02:30 rgi-sql CDRTool[15559]: Error: Cannot find rates for callid= 00808260004800068104000005E9 at 82.144.106.187, billing party=user at 1.2.3.4, customer gateway=1.2.3.4, gateway=1.2.3.4, destination=1, profile=Normal, app=audio and then, having created the billing_rates_reducida table: Jun 16 12:03:16 rgi-sql CDRTool[21793]: ConnectFee=0.0000 Span=1 Duration=6 DestId=1 gateway=1.2.3.4 Profile=Normal Period=weekday Rate=reducida Interval=0-24 Cost=0.0500/60 Price=0.0050

2 1

[OpenSER-Users] lots of OpenSER processes
by Mike Li 18 Jun '08

18 Jun '08

Hi, everyone, I have installed OpenSER 1.3.2, and it works fine for me, but i found lots of active processes for OpenSER, what's happened? I was using CentOS for the server. [root@localhost ~]# ps -aux Warning: bad syntax, perhaps a bogus '-'? See /usr/share/doc/procps-3.2.3/FAQ USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.5 0.2 2428 548 ? S 17:18 0:02 init [3] root 2 0.0 0.0 0 0 ? S 17:18 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 17:18 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 17:18 0:00 [events/0] root 5 0.0 0.0 0 0 ? S< 17:18 0:00 [khelper] root 6 0.0 0.0 0 0 ? S< 17:18 0:00 [kacpid] root 14 0.0 0.0 0 0 ? S< 17:18 0:00 [kblockd/0] root 15 0.0 0.0 0 0 ? S 17:18 0:00 [khubd] root 32 0.0 0.0 0 0 ? S 17:18 0:00 [pdflush] root 33 0.0 0.0 0 0 ? S 17:18 0:00 [pdflush] root 35 0.0 0.0 0 0 ? S< 17:18 0:00 [aio/0] root 34 0.0 0.0 0 0 ? S 17:18 0:00 [kswapd0] root 179 0.0 0.0 0 0 ? S 17:18 0:00 [kseriod] root 301 0.0 0.0 0 0 ? S< 17:18 0:00 [kmirrord] root 311 0.0 0.0 0 0 ? S 17:18 0:00 [kjournald] root 1348 0.0 0.1 2668 440 ? S<s 17:18 0:00 udevd root 1404 0.0 0.0 0 0 ? S< 17:18 0:00 [kauditd] root 1457 0.0 0.0 0 0 ? S 17:18 0:00 [kjournald] root 1926 0.0 3.9 30504 9952 ? Ss 17:19 0:00 /usr/local/apache2/bin/httpd -k start daemon 1990 0.0 3.5 296848 9024 ? Sl 17:19 0:00 /usr/local/apache2/bin/httpd -k start daemon 1992 0.0 3.5 296848 9028 ? Sl 17:19 0:00 /usr/local/apache2/bin/httpd -k start daemon 1994 0.0 3.5 296848 9028 ? Sl 17:19 0:00 /usr/local/apache2/bin/httpd -k start root 2191 0.0 0.2 2428 532 ? Ss 17:19 0:00 syslogd -m 0 root 2195 0.0 0.1 2912 376 ? Ss 17:19 0:00 klogd -x rpc 2222 0.0 0.2 2760 548 ? Ss 17:19 0:00 portmap root 2241 0.0 0.2 1836 708 ? Ss 17:19 0:00 rpc.statd root 2269 0.0 0.1 5312 348 ? Ss 17:19 0:00 rpc.idmapd root 2341 0.0 0.1 2212 432 ? Ss 17:19 0:00 /usr/sbin/acpid root 2350 0.0 0.7 9088 1888 ? Ss 17:19 0:00 cupsd root 2398 0.0 0.4 4948 1124 ? Ss 17:19 0:00 /usr/sbin/sshd root 2411 0.0 0.2 3340 748 ? Ss 17:19 0:00 xinetd -stayalive -pidfile /var/run/xinetd.pid root 2432 0.0 0.7 8748 1836 ? Ss 17:19 0:00 sendmail: accepting connections smmsp 2440 0.0 0.6 7488 1624 ? Ss 17:19 0:00 sendmail: Queue runner@01:00:00 for /var/spool/clientmqueue root 2450 0.0 0.1 3432 340 ? Ss 17:19 0:00 gpm -m /dev/input/mice -t imps2 root 2473 0.0 0.3 6528 908 ? Ss 17:19 0:00 crond xfs 2513 0.0 0.3 3920 888 ? Ss 17:19 0:00 xfs -droppriv -daemon root 2522 0.0 0.1 2480 484 ? SNs 17:19 0:00 anacron -s root 2530 0.0 0.1 3156 432 ? Ss 17:19 0:00 /usr/sbin/atd dbus 2539 0.0 0.3 3604 800 ? Ss 17:19 0:00 dbus-daemon-1 --system root 2548 0.4 1.3 6084 3316 ? Ss 17:19 0:01 hald root 2581 0.0 0.4 5844 1232 ? S 17:19 0:00 /bin/sh /usr/local/mysql/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/lo mysql 2622 0.1 18.7 439736 47852 ? S 17:19 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 2633 0.0 18.7 439736 47852 ? S 17:19 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 2634 0.0 18.7 439736 47852 ? S 17:19 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 2641 0.0 0.1 2052 416 tty1 Ss+ 17:19 0:00 /sbin/mingetty tty1 root 2642 0.0 0.1 1852 416 tty2 Ss+ 17:19 0:00 /sbin/mingetty tty2 root 2643 0.0 0.1 3064 416 tty3 Ss+ 17:19 0:00 /sbin/mingetty tty3 root 2644 0.0 0.1 1876 416 tty4 Ss+ 17:19 0:00 /sbin/mingetty tty4 root 2645 0.0 0.1 1500 412 tty5 Ss+ 17:19 0:00 /sbin/mingetty tty5 root 2951 0.0 0.1 3332 416 tty6 Ss+ 17:19 0:00 /sbin/mingetty tty6 root 3214 0.0 1.3 40360 3360 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3216 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3217 0.0 0.4 40360 1140 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid root 3218 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid root 3219 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid root 3220 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3221 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3222 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3223 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3224 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3225 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3226 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3227 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3228 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3229 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3230 0.0 0.4 40360 1076 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3231 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3232 0.0 0.4 40360 1160 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid root 3233 0.0 0.4 40364 1108 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3234 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3235 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3236 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3237 0.0 0.4 40360 1196 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3238 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3239 0.0 0.4 40360 1196 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3240 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3241 0.0 0.4 40360 1196 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3242 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3243 0.0 0.4 40360 1196 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid root 3244 0.0 0.4 40360 1200 ? S 17:20 0:00 /usr/local/sbin/openser -P /var/run/openser.pid mysql 3245 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3246 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3247 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3248 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys mysql 3249 0.0 18.7 439736 47852 ? S 17:20 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3253 0.4 0.8 8484 2264 ? Ss 17:22 0:00 sshd: root@pts/0 root 3255 0.0 0.5 5088 1428 pts/0 Ss 17:22 0:00 -bash mysql 3329 0.0 18.7 439736 47852 ? S 17:22 0:00 /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/var/lib/mysql --user=mys root 3339 0.0 0.3 3152 768 pts/0 R+ 17:25 0:00 ps -aux [root@localhost ~]# BR Mike Li

4 3

[OpenSER-Users] packet analyzing
by Pezhman Lali 18 Jun '08

18 Jun '08

Dear, What is the best solution for sip packet analyzing, on the busy server, to find the reason of one-way calling? best

3 2

[OpenSER-Users] Critical issues about OPENSER PUA_XMPP.
by Gaoqiang Qian 18 Jun '08

18 Jun '08

Hi, I have setup the Openser 1.3.2 (mysql, presence, presence_xml, pua, xmpp, and Pua_xmpp) module for evaluation. Now I found two critical issue about the presence gateway of SIMPLE_XMPP module PUA_XMPP of openser. 1. missing two side authorisation, gateway only send sip level subsribe message to XMPP server, but the gateway needs to send similar XMPP level subscribe message what is seen in the other direction when a buddy is addded to the XMPP clients' roster. 2. empty NOTIFY for initial SIP SUBSRIBE request Please verify me if this is the known issue going to be fixed later or configuration bug. Thanks a lot. Br, Gaoqiang -- Gaoqiang Qian

1 0

Re: [OpenSER-Users] OPenser+mediaproxy
by David Villasmil 17 Jun '08

17 Jun '08

> > >> > select *, UNIX_TIMESTAMP(AcctStartTime) as timestamp from radacct where >> > (1=1) and Normalized = '0' and AcctStopTime != '0000-00-00 00:00:00' >> and >> > (ConnectInfo_stop is not NULL or MediaInfo is NULL or MediaInfo != '') >> > >> > >> > MediaInfo (after update from mediaproxy) is NOT null... the rest of the >> > fields are ok. >> >> Look again at the SQL query of above: >> >> MediaInfo is NULL or MediaInfo != '' >> >> It's not needed that MediaInfo is NULL, it can be any value except NULL or >> empty string. >> > That's it, it IS an empry string, so it will never rate it

2 7

[OpenSER-Users] openser board updates
by Daniel-Constantin Mierla 17 Jun '08

17 Jun '08

Hello, Cesc Santasusana has retired from the board of OPENSER as he is no longer involved in projects using OPENSER -- he may come back in the near future. I want to thank Cesc for all his contributions in technical and organizational aspects of OPENSER. To complete the board, Henning Westerholt will take his seat. Now, one of the main tasks of the board is to define the election mechanisms for board members, where the community has a relevant contribution. Welcome to Henning, who did a lot of improvements to OPENSER and advocated the project to many events worldwide. His experience from other open source projects will help a lot. Cheers, Daniel -- http://www.asipto.com

1 0

Re: [OpenSER-Users] Enter Dialog info to database
by Ali Jawad 17 Jun '08

17 Jun '08

Well I did :-) and it did not work, no info is written into the db With Regards Ali Jawad System Administrator Splendor Telecom (www.splendor.net) Beirut, Lebanon Phone: +961 1 373725 Fax: + 961 1 375554 ________________________________ From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Tuesday, June 17, 2008 3:27 PM To: Ali Jawad Subject: Re: [OpenSER-Users] Enter Dialog info to database try it and you'll see ;) On Tue, Jun 17, 2008 at 2:22 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: Hi I am setting the flag as follows if (is_method("INVITE")) { setflag(4); } Is that the correct way ? With Regards ________________________________ From: David Villasmil [mailto:david.villasmil.work@gmail.com] Sent: Tuesday, June 17, 2008 3:21 PM To: Ali Jawad Subject: Re: [OpenSER-Users] Enter Dialog info to database You have to set the flag on incoming INVITEs to enable db on the dialog. On Tue, Jun 17, 2008 at 2:18 PM, Ali Jawad <ali.jawad(a)splendor.net> wrote: Hi All I have the following dialog module setup # ----- Dialog ----------- modparam("dialog", "db_url","mysql://openser:xxxxxxxxxxxxx@localhost/openser") modparam("dialog", "db_mode", 1) modparam("dialog", "dlg_flag", 4) modparam("dialog", "enable_stats", 1) modparam("dialog", "rr_param", "did") If I execute /usr/local/sbin/openserctl fifo dlg_list I get the dialogs that are taking place. However there is nothing written into the database even for calls longer than 2 minute Anything I missed here? Thanks _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner <http://www.mailscanner.info/> , and is believed to be clean.

2 2

Re: [OpenSER-Users] OPenser+mediaproxy
by David Villasmil 17 Jun '08

17 Jun '08

This is obvioulsy the problem, if I go and set MediaInfo to NULL by hand, the call get rated! ----- Original Message ----- From: David Villasmil To: openser users Sent: Tuesday, June 17, 2008 2:42 PM Subject: Re: [OpenSER-Users] OPenser+mediaproxy Looking at mysql's log, this is what I see: ---> BY OPENSER_: 24 Query INSERT INTO radacct (RadAcctId, AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, AcctStartTime, AcctStopTime, AcctSessionTime, AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, ENUMtld, FramedIPAddress, AcctStartDelay, AcctStopDelay, SipResponseCode, SipMethod, SipTranslatedRequestURI, SipToTag, SipFromTag, SipRPID, SourceIP, SourcePort, CanonicalURI) VALUES (NULL, 'OWNhNDAwMmIyOTM5NDU3MjQ4MGJjMTk2YWIwZmE0NGE.', 'd986b295f8a55559', '', SUBSTRING_INDEX('', '@',-1), '1.2.3.4', '5060', '2008-06-17 08:27:52', '0', '0', '0', '0', trim(leading 'sip:' from trim(leading 'sips:' from 'sip:0013058883456@1.2.3.4')), trim(leading 'sip:' from trim(leading 'sips:' from 'sip:915568911@1.2.3.4')), '200', 'Sip-Session', '', '', '0', '0', '200', 'Invite', trim(leading 'sip:' from trim(leading 'sips:' from 'sip:13058883456@5.6.7.8:5060=3Btransport=3Dudp')), '17062708081947605004610377', '34794a17', '', '9.8.7.6', '27374', trim(leading 'sip:' from trim(leading 'sips:' from '')) ) ------------------------------------------------------------------------------------------------------------------------------------------------- ---> THE CALL DROPS, THE BY MEDIAPROXY: 29 Connect openser@localhost on radius 29 Query SET NAMES latin1 29 Query UPDATE radacct SET AcctSessionTime = AcctSessionTime + IF(ConnectInfo_stop IS NULL, 53, 0), AcctStopTime = DATE_ADD(AcctStartTime, INTERVAL AcctSessionTime SECOND), AcctInputOctets = AcctInputOctets + 77488, AcctOutputOctets = AcctOutputOctets + 152760, SipUserAgents = 'eyeBeam release 1014c stamp 46090 + unknown-agent', SipCodecs = 'G729', SipApplicationType = 'Audio', MediaInfo = '', <------------------ LOOK AT THIS! ITS AN EMPTY STRING!! Normalized = '0' WHERE AcctSessionId = 'OWNhNDAwMmIyOTM5NDU3MjQ4MGJjMTk2YWIwZmE0NGE.' AND SipFromTag = '34794a17' AND SipToTag = '17062708081947605004610377' ------------------------------------------------------------------------------------------------------------------------------------------------- ---> THEN BY CDRTOOL, GETTING CDRs TO RATE: select *, UNIX_TIMESTAMP(AcctStartTime) as timestamp from radacct where (1=1) and Normalized = '0' and AcctStopTime != '0000-00-00 00:00:00' and (ConnectInfo_stop is not NULL or MediaInfo is NULL or MediaInfo != '') <------------- CDRTOOL DOESN'T WANT AN EMPTY STRING!! ------------------------------------------------------------------------------------------------------------------------------------------------- this of course will never work, I wonder whether it is a configuration problem or a cdrtool/mediaproxy bug... Any thoughts? David

1 0

[OpenSER-Users] Need help with running CDRTool with Openser
by Pete Kay 17 Jun '08

17 Jun '08

Hi, I am trying to setup CDRTool to work with Openser. After installation, I try to bring up the web UI and login with username=admin and password=admin. But it does not log me in. In the CDRTool DB, I can find the admin username in the auth_user table. Could someone tell me what could be wrong? Where can I check the log file for CDRTool? In the documentation, it says that CDRTool can provide 100% accuracy when use with MediaProxy. If I use rptProxy instead, can CDRTool still provide 100% accuracy? Thanks alot for all your help in advance. Regards, Pete

2 1

[OpenSER-Users] Enter Dialog info to database
by Ali Jawad 17 Jun '08

17 Jun '08

Hi All I have the following dialog module setup # ----- Dialog ----------- modparam("dialog", "db_url","mysql://openser:xxxxxxxxxxxxx@localhost/openser") modparam("dialog", "db_mode", 1) modparam("dialog", "dlg_flag", 4) modparam("dialog", "enable_stats", 1) modparam("dialog", "rr_param", "did") If I execute /usr/local/sbin/openserctl fifo dlg_list I get the dialogs that are taking place. However there is nothing written into the database even for calls longer than 2 minute Anything I missed here? Thanks

1 0

Re: [OpenSER-Users] Radius accounting and Dialog
by Raúl Alexis Betancor Santana 17 Jun '08

17 Jun '08

El Martes, 17 de Junio de 2008 10:24, escribió: > Those tests were being done from the same machine, so I guess they're very > valid. The thing is that if I fire up 2 UACs on the same machine, no matter > what I do, rtps never go through mediaproxy. I think you misunderstood what I told you. I mean, that if you have 2 UAC behind the same NAT and they do STUN queries and discover it public IP (Eyebeam does this if you don't disable STUN support), you will not see traffic going throught mediaproxy, because from OpenSer point of view, they are capable of exchanging RTP together without mediaproxy intervention. You have to do ngrep captures during this test and look at the SDP bodies to check if media IP's changes on INVITES and replies. Also I suggest you to learn who to use sipspy, that will let you take full-visual-trace of SIP traffic and learn how things flow throught your proxy. P.D.: Please, do not use gmail anymore or configure it to work as a compliance email client. -- Saludos. Raúl Alexis Betancor Santana Dimensión Virtual S.L.

1 0

[OpenSER-Users] How to configure OpenSER 1.3.1 to support Proxy Authenticate?
by Steven.Wu＠teleca.com 17 Jun '08

17 Jun '08

Hi All, How to configure OpenSER 1.3.1 to support Proxy Authenticate? For all SIP request come to the server we challenge with 407. Best regards, Steven Wu

3 2

Re: [OpenSER-Users] Radius accounting and Dialog
by Raúl Alexis Betancor Santana 17 Jun '08

17 Jun '08

On Fri, Jun 13, 2008 at 10:27:55AM +0200, David Villasmil wrote: > That's what I thought. I just setup mediaproxy and making some tests. > Its working as far a audio is concerned. But all calls have a duration > of 0 seconds! Even though audio is flowing through mo it does't seem > to realize it and shows a messgae of "timeout", in this timeout, > though there's data flowing. But it still sends the STOP to the > radius. > > anyone knows why? Has this happen to anyone? > > thanks a lot. A complete ngrep trace would be need to check what it's happening Have you audio both ways and still receive the timeout ? -- Saludos Raúl Alexis Betancor Santana Dimensión Virtual S.L.

2 4

Re: [OpenSER-Users] OPenser+mediaproxy
by David Villasmil 16 Jun '08

16 Jun '08

Iñaki, Is this the same thing that's happening to me? * Fixed vulnerability related to missing BYE and MediaProxy radius Update action (reported by Inaki Baz Castil) You must reload the sql stored procedures from setup/radius/OpenSER/radius_accounting.proc or update Freeradius with setup/radius/OpenSER/sql.conf when not using the stored procedures I've been looking at the queries cdrtool and mediaproxy executeon mysql and although mediaproxy SUCCESFULLY detects a lost call and UPDATES the AcctStopTime, cdrtools doesn't updates the record info because MediaInfo is NOT NULL... this is the query cdrtool execs to get the cdrs to rate: select *, UNIX_TIMESTAMP(AcctStartTime) as timestamp from radacct where (1=1) and Normalized = '0' and AcctStopTime != '0000-00-00 00:00:00' and (ConnectInfo_stop is not NULL or MediaInfo is NULL or MediaInfo != '') MediaInfo (after update from mediaproxy) is NOT null... the rest of the fields are ok. thanks David On Mon, Jun 16, 2008 at 10:00 PM, David Villasmil < david.villasmil.work(a)gmail.com> wrote: > I believe so, if not, who could update the AcctStopTime? I shutdown my UAC > by hand, so no BYE was sent. > > this is my config: > > [Dispatcher] > start = yes > socket = /var/run/mediaproxy/proxydispatcher.sock > group = openser > defaultProxy = /var/run/mediaproxy/mediaproxy.sock > > [MediaProxy] > start = yes > socket = /var/run/mediaproxy/mediaproxy.sock > group = openser > listen = 192.168.1.9 > ;IP-Address of your host (not localhost, not 127.0.0.1) > allow = 192.168.1.19 > ;IP-Address of your host (not localhost, not 127.0.0.1) > ;if empty (undefined), takes the first entry of /etc/hosts > proxyIP = 1.2.3.4 > portRange = 35000:65000 > > TOS = 0xb8 > idleTimeout = 20 > holdTimeout = 300 > forceClose = 900 > > [Accounting] > dbaccounting = on > > [Database] > user = openser > password = mypass > host = 192.168.1.19 > database = radius > table = radacct > > do you see anything strange? > > thanks a lot > > > On Mon, Jun 16, 2008 at 9:56 PM, Iñaki Baz Castillo <ibc(a)aliax.net> wrote: > >> El Lunes, 16 de Junio de 2008, David Villasmil escribió: >> > I've configure openser and mediaproxy con pass all rtps via >> mediaproxy.... >> > I've found this error that is a bit weird: >> > >> > some calls are not rated, Calls that do not get the BYE, although they >> are >> > updated on the radacct table with its corresponding AcctStopTime, they >> are >> > NOT rated, and on the cdr page are showing as "in progress" which is not >> > true by any means! >> > >> > Has anyone encountered this? >> >> Have you configured MediaProxy to update radacct table? >> >> >> >> -- >> Iñaki Baz Castillo >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.openser.org >> http://lists.openser.org/cgi-bin/mailman/listinfo/users >> > >

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users