- sr-users - kamailio.org

Re: [OpenSER-Users] Serial fork terminated after 5 call
by Sergey Babichev 22 Jan '08

22 Jan '08

Thanks, where i can read about this error (discarding fwd for a cancelled transaction) and others? > Hi Sergey, > the "discarding fwd for a cancelled transaction" error is generated when > you try to send a request for a transaction that was already cancelled > from the client side. So probably the PSTN GW cancels the call while you > still want to fork a new branch. > regards, > Bogdan > Sergey Babichev wrote: > > Problem is appear when i calling from PSTN. It's work fine when i calling from sip account to huntgroup. I think this is problem whith timer in my PSTN gateway. > > > > > > > > > >> Hi all! > >> > > > > > >> I want enable hunting for my extensions. It's work fine, but if my hunt group consists of more then 5 extensions, call terminated and I see in syslog error: > >> > > > > > >> Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction > >> > > > > > >> Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:w_t_relay: t_forward_nonack failed > >> > > > > > >> Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: DEBUG:tm:relay_reply: branch=5, save=0, relay=5 > >> > > > > > >> What is problem may be? > >> > > > > > >> -- > >> > > > > > >> Best regards, > >> > > > > > >> Sergey Babichev > >> > > > > > >> _______________________________________________ > >> > > > > > >> Users mailing list > >> > > > > > >> Users(a)lists.openser.org > >> > > > > > >> http://lists.openser.org/cgi-bin/mailman/listinfo/users > >> > > > > > > > > -- > > > > Best regards, > > > > Sergey Babichev > > > > _______________________________________________ > > Users mailing list > > Users(a)lists.openser.org > > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > -- Best regards, Sergey Babichev

2 1

[OpenSER-Users] SCTP enabled stack
by J Bhanot 22 Jan '08

22 Jan '08

Hi, I am trying to build the stack with SCTP enabled... I am doing following SCTP=1 make all but I am getting error - In file included from forward.h:49, from action.c:49: sctp_server.h:32:26: error: netinet/sctp.h: No such file or directory make: *** [action.o] Error 1 I am using FC8 - have inserted the SCTP module using /sbin/modprobe sctp without any error.. To overcome this error.... I chaged the absolute path of sctp.h in sctp_server.h to #include "/usr/src/kernels/2.6.23.1-42.fc8-i686/include/net/sctp/sctp.h"*/ instead of #include <netinet/sctp.h> but even then i am getting many erros of redeclration of many variables and files not being found in sctp.h Kindly suggest what should be done so that server can work with SCTP. Thanks, jb __________________________________________ =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you

4 7

[OpenSER-Users] register two AOR
by Victor Gamov 22 Jan '08

22 Jan '08

Hi gentlemens! Is it possible to set modparam("registrar", "aor_avp", "$avp(s:sip-aor)") and call save("location") to save AOR from $avp(s:sip-aor) If not, how I can register two AOR when REGISTER message processed? -- CU, Victor Gamov

2 2

[OpenSER-Users] Launch of Soap-Simple-Proxy version 1.0.2
by Adrian Georgescu 22 Jan '08

22 Jan '08

Hello, This software exposes a simple to use SOAP interface for the OpenXCAP server available at http://openxcap.org It is a transparent proxy for SOAP to XCAP requests relying on XCAP server for authenticating requests. Applications ------------ You may use the provided functions to: 1. Publish presence information (using pidf-manipulation application) 2. Set the presence policy for a given presentity (pres-rules application) 3. Retrieve the OpenSER watchers for a given presentity (watchers application) The software can be used as: - Stand-alone data publisher for persistent Presence documents. - Policy manager. You can build a web interface to manage the pres-rules documetn and use it in combination with Eyebeam-lite as a complete SIP SIMPLE client. - To retreive and display the active watchers from OpenSER in a web interface. Usage ----- To use the software you must use a SOAP client. First you must generate the client library from the supplied WSDL file using the SOAP tools available in your programming language. The SOAP functions usage and syntax are self explanatory. Available functions are described in the wsdl/ssp.wsdl file. An example of PHP client library is provided with CDRTool version 6 or higher, the soap client functions are available in the file: /var/www/CDRTool/provisioning/ngnpro_soap_library.phtml in the class WebService_SoapSIMPLEProxy_PresencePort Support ------- The support is provided by AG Projects on a best effort basis. Report problems via the ticketing system from openxcap.org or openser users mailing lists. License ------- Soap-Simple-Proxy is licensed under GNU PUBLIC LICENSE version 2.0. The software can be downloaded from: http://openxcap.org Kind regards, Adrian Georgescu

1 0

[OpenSER-Users] New OpenXCAP release 0.9.9
by Adrian Georgescu 22 Jan '08

22 Jan '08

Hello, There is a new OpenXCAP release available. Changes in version 0.9.9 ------------------------ * Fixed node selector decoding * Save presence rules documents under the same file name ("index.xml") * Moved trusted_peers to [Authentication] config section * Default xcap_table to "xcap" in config.ini.sample * Improved URI logging * DELETE of a full document doesn't produce an Etag in the 200 response * Added SIP Thor backend Changes in version 0.9.8 ------------------------ * Support subdirectories by using doc_uri column in xcap table * Updated MySQL xcap table structure The software can be downloaded from: http://openxcap.org Kind regards, Adrian Georgescu

1 0

[Serusers] SER service: registration problem (load balancing quirk?)
by Tom van der Geer 22 Jan '08

22 Jan '08

Dear SER users, I'm experiencing occasional problems with my SIP clients registration to the (free) iptel.org SER service. I'm not sure if this is the place to ask questions regarding this service. If not, please give me a pointer who/what I should contact. I've made 2 tcpdumps. 1 from a failing registration request and from a successful registration request. The setup for both situations is the same. These captures were made within 40 minutes from each other. In both cases the first registration attempt is replied with a 401 Unauthorized (obviously) which request for authentication. In both cases my SIP client (SJPhone) replies correctly (I assume) with a new registration and the requested account credentials. In the case of a successful registration the SER replies with a 200 OK. In the case of a failing registration my SIP client receives another 401 Unauthorized message. What struck me is that this second 401 is sent from another SER system. (The "Server:" header from the first registration attempt is different from the second registration attempt.) The first header has "Server: Sip EXpress router (2.1.0-dev16-tcp (i386/linux))" while the second 401 has "Server: Sip EXpress router (2.0.0-rc5 (i386/linux))". (note the difference in SER versions) I've verified that in the case of a successful registration the Server header in the first (401) and second (200) response are the same: "Server: Sip EXpress router (2.1.0-dev16-tcp (i386/linux))" Is this some kind of weird load balancing quirk? From a security point of view I don't want to send my TCP Dumps (with my authentication) to the mailing list, but I can send it to a personal email address when required. Thanks, Tom

2 1

Re: [OpenSER-Users] Serial fork terminated after 5 call
by Sergey Babichev 22 Jan '08

22 Jan '08

Problem is appear when i calling from PSTN. It's work fine when i calling from sip account to huntgroup. I think this is problem whith timer in my PSTN gateway. > Hi all! > I want enable hunting for my extensions. It's work fine, but if my hunt group consists of more then 5 extensions, call terminated and I see in syslog error: > Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction > Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:w_t_relay: t_forward_nonack failed > Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: DEBUG:tm:relay_reply: branch=5, save=0, relay=5 > What is problem may be? > -- > Best regards, > Sergey Babichev > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users -- Best regards, Sergey Babichev

2 1

[OpenSER-Users] Serial fork terminated after 5 call
by Sergey Babichev 22 Jan '08

22 Jan '08

Hi all! I want enable hunting for my extensions. It's work fine, but if my hunt group consists of more then 5 extensions, call terminated and I see in syslog error: Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: ERROR:tm:w_t_relay: t_forward_nonack failed Jan 21 20:54:16 ser1-2 /usr/local/sbin/openser[23728]: DEBUG:tm:relay_reply: branch=5, save=0, relay=5 What is problem may be? -- Best regards, Sergey Babichev

1 0

[OpenSER-Users] Why RPID related functions instead of PAI?
by Iñaki Baz Castillo 21 Jan '08

21 Jan '08

Hi, "Remote-Party-ID" is a draft ("draft-ietf-sip-privacy-04") [1] expired in 2002 while "P-Asserted-Identity" is a official RFC (3325) [2]. I'd like to know why OpenSer manages RPID in some functions ("auth" module) instead of PAI. I assume that some gateways just implement RPID and so, but can't understand why PAI is ignored (the use of PAI is extended in gateways). As a curiosity, both draft and RFC have really **common** parts, as chapter "Introduction" (4 in draft, 3 in RFC): "3/4 Introduction Various providers offering a telephony service over IP networks have selected SIP as a call establishment protocol. Their environments require a way for trusted network elements operated by the service providers (for example SIP proxy servers) to communicate the identity of the subscribers to such a service, yet also need to withhold this information from entities that are not trusted when necessary. Such networks typically assume some level of transitive trust amongst providers and the devices they operate. These networks need to support certain traditional telephony services and meet basic regulatory and public safety requirements. These include Calling Identity Delivery services, Calling Identity Delivery Blocking, and the ability to trace the originator of a call ... " So my question is again:why OpenSer supports RPID related functions and not PAI functions? Thanks for any explanation. [1] RPID: http://tools.ietf.org/html/draft-ietf-sip-privacy-04 [2] PAI: http://www.faqs.org/rfcs/rfc3325.html -- Iñaki Baz Castillo

3 3

[OpenSER-Users] Openser + Mediaproxy not working with 2 domains
by Andreti 21 Jan '08

21 Jan '08

Hi everybody, I'm working with Openser + Mediaproxy 1.9.0 and it seems that everything is working when the calls are establised between users attached to the same proxy server, even with different kind of NATs. However It doen't work in 2 different scenarios, and the result is exactly the same , the video and audio is only sent in one way. Scenario 1 ======== User A attached to the SIP proxy xxx.xxx.xxx.13 (Public IP) calls to a GW xxx.xxx.xxx.11 (Public IP) with several users internally associated. In this case the user A can see the video and audio sent by the GW, but the GW doesn't receive any RTSP stream. It seems that the mediaproxy doesn't do anything, why? maybe because the GW blongs to other domain (xxx.xxx.xxx.11) ? What can I do? If the GW calls to user A, it works fine (I can see the session in the mediaproxy with sessions.py) Scenario 2 ======== In this case, I have another GW with Public IP address xxx.xxx.xxx.14, but it doesn't include in the INVITE message the SDP body. The GW calls to the same user attached to the SIP proxy xxx.xxx.xxx.13 , and the behaviour is exactly the same as scenario 1, the calling site can sse the video and audio but the called can't. Unlike the previous scenario, the signalling is: INVITE without SDP --> 200 OK (SDP) -- > ACK (SDP) In theory, Mediaproxy 1.9.0 should support this procedure since it's a SIP standard mechanism, however the called party doesn't receive RTP stream. In my opinion, the problem could be related to scenario 1, I mean , the calling party is not attached to the SIP proxy (belongs to other domain) and when the 200 OK (SDP) message arrives to the SIP proxy, the mediaproxy doesn't do anything Sorry for the complex explanation. I've waste a lot of time trying to solve this solution and honestly I don't know what to do. Please, could somebody help?? I attach my openser.conf. I hope it helps. Andreti debug=5 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL0 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes listen=xxx.xxx.10.12 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" # ------------------ module loading ---------------------------------- mpath = "/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "domain.so" loadmodule "mediaproxy.so" loadmodule "uri_db.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "avpops.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "nathelper.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "auth.so" loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 20) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 1) #cambio 16_04_07 modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") #puesto para el CDRTool modparam("acc", "failed_transaction_flag", 1) modparam("acc", "report_cancels", 0) modparam("acc", "report_ack", 0) modparam("acc", "early_media", 0) modparam("acc", "log_level", 1) #modparam("acc", "radius_config", "/etc/openser/radius/client.conf") modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp;\ Sip-RPid=$avp(s:rpid); \ Source-IP=$si; \ Source-Port=$sp; \ Canonical-URI=$avp($can_uri); \ Billing-Party=$avp($billing_party); \ Divert-Reason=$avp(s:divert_reason); \ X-RTP-Stat=$avp(s:rtp_statistics); \ From-Header=$hdr(from); \ User-Agent=$hdr(user-agent); \ Contact=$hdr(contact); \ Event=$hdr(event)") # SIP-Proxy-IP=$avp(s:sip_proxy_ip)") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- avpops params -- #modparam("avpops", "avp_aliases", "day=i:101;time=i:102") modparam("avpops","avp_aliases","can_uri=i:34") modparam("avpops","avp_aliases","billing_party=i:1") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "natping_interval", 60) modparam("registrar", "nat_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # setflag(ACCOUNTING_FLAG); # avp_write("SER_IP","$avp(s:sip-proxy)"); # avp_write("$ru", "$avp(can_uri)"); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); setflag(1); } route(1); }; if (src_ip==193.36.177.227) { fix_nated_sdp("2"); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (method=="MESSAGE") { setflag(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("sip.com", "subscriber")) { # www_challenge("sip.com", "0"); # exit; # }; if (!radius_www_authorize("")) { www_challenge("","1"); exit; } if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; }; if (method=="INVITE") { t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { end_media_session(); }; if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri=="sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; t_relay(); return; }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri=="sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; append_hf("P-hint: usrloc applied\r\n"); # route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; } -- View this message in context: http://www.nabble.com/Openser-%2B-Mediaproxy-not-working-with-2-domains-tp1… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

2 2

[OpenSER-Users] Calls disconnect automatically
by VoIP Forums www.Go4Calls.com 21 Jan '08

21 Jan '08

Hi Friends, I start getting one problem, the calls disconnect automatically in 30 and 32 sec. I am using openser + rtpproxy before with the same openser.cfg it was running smoothly and once traffic increased this problem appeared. Could you please help me to solve this issue because i put openser in production and now no one can make long call. Regards, www.Go4Calls.Com VoIP Forums _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

Re: [OpenSER-Users] xlite with openser / hello world posts SOLVED
by A.smith 21 Jan '08

21 Jan '08

Hi Moujane, In case you haven´t worked it out yet, I managed to get an openser.cfg to work for simple testing between XLite or other SIP client. Its a shame there isnt a working config easily findable on the openser site or other internet resource for those people new to SIP and OpenSER.... :S Try this, for me it works on OpenSER 1.2.2 # SECTION 1 - GLOBAL DEFINTIONS debug=3 fork=yes log_stderror=no #fork=no #log_stderror=yes listen=10.10.10.10 #put your server IP here port=5060 disable_dns_blacklist=yes dns=no rev_dns=no children=4 # SECTION 2 - MODULE DEFINTION mpath="/usr/local/lib/openser/modules" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "textops.so" loadmodule "xlog.so" loadmodule "registrar.so" # SECTION 3 - MODULE CONFIGURATION modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) # main routing logic FOR RADIUS ACC ACCOUNTING route{ if (!mf_process_maxfwd_header("15")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); exit; }; if (method=="REGISTER") { record_route(); if (!save("location")) { sl_reply_error(); }; exit; }; if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } # SECTION 5 - SECONDARY ROUTE BLOCKS route[1] { if (!t_relay()) { sl_reply_error(); }; exit; } ________________________________________________ Message sent using UK Grid Webmail 2.7.9

3 3

[OpenSER-Users] Adding "Reason: SIP ; cause=200" header when CANCEL in forking scenarios
by Iñaki Baz Castillo 21 Jan '08

21 Jan '08

Hi, according to RFC 3326 [1] (Reason Header): 3.1 Call Completed Elsewhere A proxy forks an INVITE request and one of the branches returns a 200 (OK). The forking proxy includes this status code in a Reason header field in the CANCEL request that it sends to the rest of the branches. Reason: SIP ;cause=200 ;text="Call completed elsewhere" With this behaviour, if an AoR is registered in two phones and one of them answers a call, that call will not appear as MISSED in the other phone (if the phone supports "Reason" headers). Is it possible OpenSer to add this header when cancelling the rest of ringing branches? If not, do you think it could be a feature request? [1] http://www.faqs.org/rfcs/rfc3326.html -- Iñaki Baz Castillo

3 2

[OpenSER-Users] Routing logic Check
by SP GLE 21 Jan '08

21 Jan '08

Hi, Is there any tool to validate an OpenSer Routing Configuration Logic ? We would like to validate a configuration to avoid regressions on routing behaviour. Regards. _____________________________________________________________________________ Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail http://mail.yahoo.fr

2 1

Re: [OpenSER-Users] Calls disconnect automatically
by VoIP Forums www.Go4Calls.com 21 Jan '08

21 Jan '08

Hi sorry, I forget to give my openser.cfg, there is one more point if i am using STUN server in our linksys device the call goes normal for long time till user finish the call. It seems something wrong in NAT configuration. # # sample config file to be used with nathelper/rtpproxy # # # ----------- global configuration parameters ------------------------ debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=212.XXX.XXX.XXX:5064 #port=5064 children=4 disable_dns_blacklist = yes # --- module loading mpath="/usr/local/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "nathelper.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 2) modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("usrloc|auth_db","db_url","mysql://proxy:MoHaKa21@192.168.1.50/emafone") # -- usrloc params -- modparam("usrloc", "nat_bflag", 6) # -- registrar params -- modparam("registrar|nathelper", "received_avp", "$avp(i:42)") # -- auth params -- # -- rr params -- modparam("rr", "enable_full_lr", 1) # -- nathelper modparam("nathelper", "natping_interval", 0) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "rtpproxy_disable", 0) modparam("nathelper", "rtpproxy_disable_tout", 60) modparam("nathelper", "rtpproxy_tout", 1) modparam("nathelper", "rtpproxy_retr", 5) modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "received_avp", "$avp(i:801)") #modparam("nathelper", "rtpproxy_sock", "udp:212.100.235.229:22222") #modparam("nathelper", "rtpproxy_sock", "/var/run/rtpproxy.sock") #modparam("nathelper", "natping_interval", 30) #modparam("nathelper", "ping_nated_only", 1) #modparam("nathelper", "sipping_bflag", 7) #modparam("nathelper", "sipping_from", "sip:pinger@openser.org") # --- main routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # NAT detection route(2); if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { #append_hf("P-hint: outbound\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { if (!www_authorize("212.XXX.XXX.XXX", "subscriber")) { www_challenge("212.XXX.XXX.XXX", "0"); exit; }; if (isflagset(5)) { setbflag(6); # if you want OPTIONS natpings uncomment next # setbflag(7); }; save("location"); exit; }; #########PSTTN CALL ############################################# if (uri=~"sip:00[1-9][0-9]+@.*") { strip(2); rewritehostport("212.XXX.XXX.XXX:5060"); route(1); exit; }; ################################################################### if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setbflag(6); }; if (isflagset(5)||isbflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(6); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } failure_route[1] { if (isbflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (isbflagset(6)) { fix_nated_contact(); } exit; } Regards, www.Go4Calls.Com VoIP Forums From: go4calls(a)hotmail.com To: users(a)lists.openser.org; users(a)openser.org Subject: Calls disconnect automatically Date: Sun, 20 Jan 2008 18:01:48 +0800 Hi Friends, I start getting one problem, the calls disconnect automatically in 30 and 32 sec. I am using openser + rtpproxy before with the same openser.cfg it was running smoothly and once traffic increased this problem appeared. Could you please help me to solve this issue because i put openser in production and now no one can make long call. Regards, www.Go4Calls.Com VoIP Forums Express yourself instantly with MSN Messenger! MSN Messenger _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

5 9

[OpenSER-Users] hor to register ?
by Aaash shah 21 Jan '08

21 Jan '08

hi i am making project on SIP handoffs i already install openSER on fedora i dont know how to register it so please give me reply thanks -- "Never Ignore Anyone Who Cares 4 u, Becoz one day u will Realize that u have lots a diamond while u were buzy in collecting stones...."

1 0

[Serusers] lookup_contacts for natted clients returns local ip
by Tomasz Zieleniewski 21 Jan '08

21 Jan '08

Hi, I have the followning natted contact in my location table: mysql> select * from location where uid ='tw(a)sip.touk.pl'; +--------------------+-------+-----------------------------------------------------------+ | contact | flags | received | +--------------------+-------+-----------------------------------------------------------+ | sip:tw@192.168.7.2 | 1 | sip:80.53.110.142:61066;dstip=192.168.129.74;dstport=5060 | +--------------------+-------+-----------------------------------------------------------+ when I invoke lookup_contacts the ruri has local address 192.168.7.2instead of public one. Is this correct behaviour? Please point me is this should work as I think. Thank You for any help Tomasz

2 3

[OpenSER-Users] Obtaining the domain of "Refer-to" URI
by Iñaki Baz Castillo 21 Jan '08

21 Jan '08

Hi, in order to match the domain of "Refer-to" header I must do a dirty string substitution: $avp(s:rt) = $rt; avp_subst("$avp(s:rt)", "/(.*(a)|[;?].*)//gi"); If for example: Refer-To: <sip:bob@biloxi.example.net?Accept-Contact=sip:bobsdesk. biloxi.example.net&Call-ID%3D55432%40alicepc.atlanta.example.com> Then $avp(s:rt) is "biloxi.example.net". Couldn't be possible to have generic string transformations to get part of a URI in any header/variable? Is there any other way I don't know to get it easily? Thanks. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

6 14

[OpenSER-Users] [OT] Annoying empty lines when using "M4 Macro Processor"
by Iñaki Baz Castillo 20 Jan '08

20 Jan '08

Hi, as suggested here: http://www.openser.org/docs/scripting I'm using M4 to declare "define" in my OpenSer script. I've an annoying issue since M4 adds some empty lines at the top of the script. If my script has any error, the logs will show me "ERROR in line 235 in openser.cfg" but that line correspondes to line 187 in my openser.cfg.m4 file, so makes it very difficult to debug. I've read the entire doc and have no idea of how to fix it. For example, consider this simple case: ---- local.m4 ---- define(`IP',`127.0.0.1') define(`PORT' ,`5061') ----------------------- ---- file.txt.m4 ---- My ip is IP and my port is PORT. -------------------------- ~# m4 local.m4 file.txt.m4 > file.txt ---- file.txt ---- <-- Empty line <-- Empty line <-- Empty line <-- Empty line My ip is 127.0.0.1 and my port is 5061. --------------------- Does someone know how to solve it? Thanks a lot. -- Iñaki Baz Castillo

2 5

[OpenSER-Users] mysql error shuts down openser 1.3
by Christian Schlatter 20 Jan '08

20 Jan '08

Hi all, Is it normal that a simple mysql error causes the worker process to die which in turn shuts down all other openser processes? If I remember correctly, this never happened to me with the 1.2 version. The following log comes from an 1.3 installation: [30812]: ERROR:mysql:db_mysql_submit_query: driver error: Can't lock file (errno: 4009) [30812]: ERROR:mysql:db_mysql_raw_query: error while submitting query [30812]: ERROR:usrloc:get_all_db_ucontacts: raw_query failed [30792]: INFO:core:handle_sigs: child process 30812 exited by a signal 11 [30792]: INFO:core:handle_sigs: core was not generated [30792]: INFO:core:handle_sigs: terminating due to SIGCHLD [30797]: INFO:core:sig_usr: signal 15 received [30814]: INFO:core:sig_usr: signal 15 received [30798]: INFO:core:sig_usr: signal 15 received [30800]: INFO:core:sig_usr: signal 15 received [30802]: INFO:core:sig_usr: signal 15 received [30804]: INFO:core:sig_usr: signal 15 received [30806]: INFO:core:sig_usr: signal 15 received [30808]: INFO:core:sig_usr: signal 15 received Jan 14 12:54:45 proxy-2 ser[30810]: INFO:core:sig_usr: signal 15 received /Christian

3 5

[OpenSER-Users] [OT] Nortel gateway allows "tel:1234@host" but not "tel:1234" ¿?¿?¿
by Iñaki Baz Castillo 20 Jan '08

20 Jan '08

Hi, I'm trying "P-Asserted-Identity" header against a Nortel CS2000_NGSS/8.0. It works (the number in PAI header is shown as PSTN callerid number) in those cases: P-Asserted-Identity: <sip:+34666555444@host/IP> P-Asserted-Identity: <tel:+34666555444@host/IP> As you can see, the second case is wrong since a "tel" uri has no host part according to RFC 3966 [1]. And the worst thing is that Nortel disallows or doesn't understand a correctly formed "tel" uri in PAI header as this: P-Asserted-Identity: <tel:+34666555444> My experience with gateways is very limited and new, but I should assume that it is a sad bug in the Nortel SIP stack, is it? Thanks for any help. [1] RFC 3966: http://www.faqs.org/rfcs/rfc3966.html -- Iñaki Baz Castillo

1 1

[Serusers] opensource prepaid system
by Nhadie 19 Jan '08

19 Jan '08

Hi, Has anyone tested an opensource prepaid system to work on a ser/freeradius/asterisk-b2bua/asterisk setup? TIA Regards, Nhadie

1 0

[OpenSER-Users] unixodbc (ARRGH!)
by Douglas Garstang 19 Jan '08

19 Jan '08

Can someone tell me what the correct syntax is for the avp_url command? I've been at this for hours and it's driving me CRAZY! this: modparam("avpops","avp_url","unixodbc://user:password@127.0.0.1/database") gives: unixodbc:extract_error: unixodbc:SQLDriverConnect=IM002:1:0:[unixODBC][Driver Manager]Data source name not found, and no default driver specified this: modparam("avpops","avp_url","unixodbc://dsn" ) gives: core:new_db_id: error while parsing database URL: unixodbc://dsn and I've tried about a HUNDRED other combinations. Doug. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[OpenSER-Users] Problems with NAPTR records and failover
by Robert McGilvray 19 Jan '08

19 Jan '08

Greetings list, I'm trying to setup uri rewriting and failover using NAPTR records. I've gone wrong somewhere since instead of trying the first uri and only failing over if there's a transactional and/or communications problem it's creating two branches and doing parallel forking on the records. Example: >From my test SIP phone I dial 3759. Openser receives this INVITE and does a private ENUM lookup on it which returns two NAPTR records: 9.5.7.3 NAPTR 10 10 "u" "E2U+sip" "!^.*$!sip:3759@mygateway1.whoever.com!" . NAPTR 20 10 "u" "E2U+sip" "!^.*$!sip:7100@myfailovergateway1.whoever.com!" . >From what I understand this should first try to contact my gateway (a cisco box) using a uri of sip:3759@mygateway1.whoever.com. If this fails it should then take the second higher order and rewrite the URI to sip:7100@myfailovergateway1.whoever.com. Instead what I end up with is two parallel calls to gateway and failover, the second NAPTR record is a conference bridge so the cisco immediately sends back a 200 OK and openser cancels the first branch. First gateway barely gets off a ring to my phone. I haven't adjusted any of the SIP timers so the defaults should allow plenty of time for call setup etc. Debug output from the call is in http://www.idled.net/~bobm/openser-debug.txt . Am I handling the INVITE incorrectly in my config? Any assistance would be appreciated. route[1] { if (!t_relay()) { xlog("L_NOTICE", "sipprx-wpf1.globeop.com: $mi route[$rm][0] $fu -> $ru -> Error with t_relay\n"); sl_reply_error(); } exit; } INVITE routing block route[6] { sl_send_reply("100", "Trying"); if (isflagset(1)) { xlog("L_NOTICE", "sipprx-wpf1.globeop.com: $mi route[$rm][0] $fu -> $ru Processing INVITE\n"); } if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; } consume_credentials(); if ((uri =~ "sip:[0-9]{4}@.*") || (uri =~ "sip:[0-9]{10}@.*")) { prefix ("+"); if (enum_query("e164.globeop.com")) { xlog("L_INFO", "sipprx-wpf1.globeop.com: Number found in ENUM, new uri is $ru\n"); } else { xlog("L_INFO", "sipprx-wpf1.globeop.com: Number not found in ENUM\n"); revert_uri(); } } if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(1); } else if (lookup("location")) { append_hf("P-hint: usrloc applied\r\n"); route(1); } else { sl_send_reply("404","Not found"); exit; } exit; } -- Bob This email with all information contained herein or attached hereto may contain confidential and/or privileged information intended for the addressee(s) only. If you have received this email in error, please contact the sender and immediatley delete this email in its entirety and any attachments thereto.

1 1

[OpenSER-Users] Sippy b2bua
by TCB 18 Jan '08

18 Jan '08

Anyone managed to setup sippy b2bua . Pointers most welcome. I have tried setting it up and this is as far as i have gone. I have done the necessary radius config in my /etc/radiusclient-ng/{ radiusclient.conf,servers}. When i send a call from my proxy i get 403 (Auth Failed) Find attached the log file . regards -- TC

1 0

[OpenSER-Users] Sippy b2bua
by TCB 18 Jan '08

18 Jan '08

Anyone suceeded in implementing sippy b2bua. Pointers most welcome. -- TC

1 0

[OpenSER-Users] ERROR: presence_xml:get_final_notify_body?
by KevinKinnan 18 Jan '08

18 Jan '08

Did I miss something on configuration? or it simply does not send NOTIFY message when changes occur in the published data after integrating OpenXCAP? Thx in advance! Kevin _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] OpenSER: no NOTIFY when updating PUBLISH if integrating with OpenXCAP?
by KevinKinnan 18 Jan '08

18 Jan '08

Did I miss something on configuration? or it simply does not send NOTIFY message when changes occur in the published data after integrating OpenXCAP? Thx in advance! Kevin _________________________________________________________________ 手机也能上 MSN 聊天了，快来试试吧！ http://mobile.msn.com.cn/

1 0

[OpenSER-Users] OpenSER: Table "subscriber", only one new user can be added?
by KevinKinnan 18 Jan '08

18 Jan '08

Only one new entry can be added in the "subscriber" table. Or, "Duplicate entry '' for key 3" error responses. Is there any way to create more than one user in this table? Kevin, _________________________________________________________________ MSN圣诞礼物火热登场，免费发放中，快来领取吧！ http://im.live.cn/emoticons/?ID=18

6 6

[OpenSER-Users] OpenXCAP application support
by Richard Good 18 Jan '08

18 Jan '08

Hi, I am using the OpenXCAP implementation in co-ordination with OpenSER. Is there any way to support any (or at least a few more) applications than those currently supported by OpenXCAP? I previously used XCAP-Lite and stored various XML documents ranging from address books and TV guides to privacy and domain policies. I've found that with OpenXCAP if you use any application not supported ( anything besides resource-lists, pidf-manipulation, pres-rules, etc.) the Document Selector is not recognised and the documents can not be uploaded or downloaded. Is there a way to bypass this? Apologies if this is not the correct mailing list - the OpenXCAP page points to this list. Thanks and Regards, Richard

1 0

[OpenSER-Users] Help with this mediaproxy + Openser nat problem... thankssss
by Mario Bedialauneta 17 Jan '08

17 Jan '08

Hi everybody, I'm working with Openser + Mediaproxy 1.9.0 and it seems that everything is working when the calls are establised between users attached to the same proxy server, even with different kind of NATs. However It doen't work in 2 different scenarios, and the result is exactly the same , the video and audio is only sent in one way. Scenario 1 ======== User A attached to the SIP proxy xxx.xxx.xxx.13 (Public IP) calls to a GW xxx.xxx.xxx.11 (Public IP) with several users internally associated. In this case the user A can see the video and audio sent by the GW, but the GW doesn't receive any RTSP stream. It seems that the mediaproxy doesn't do anything, why? maybe because the GW blongs to other domain (xxx.xxx.xxx.11) ? What can I do? If the GW calls to user A, it works fine (I can see the session in the mediaproxy with sessions.py) Scenario 2 ======== In this case, I have another GW with Public IP address xxx.xxx.xxx.14, but it doesn't include in the INVITE message the SDP body. The GW calls to the same user attached to the SIP proxy xxx.xxx.xxx.13 , and the behaviour is exactly the same as scenario 1, the calling site can sse the video and audio but the called can't. Unlike the previous scenario, the signalling is: INVITE without SDP --> 200 OK (SDP) -- > ACK (SDP) In theory, Mediaproxy 1.9.0 should support this procedure since it's a SIP standard mechanism, however the called party doesn't receive RTP stream. In my opinion, the problem could be related to scenario 1, I mean , the calling party is not attached to the SIP proxy (belongs to other domain) and when the 200 OK (SDP) message arrives to the SIP proxy, the mediaproxy doesn't do anything Sorry for the complex explanation. I've waste a lot of time trying to solve this solution and honestly I don't know what to do. Please, could somebody help?? I attach my openser.conf. I hope it helps. Andreti debug=5 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) log_facility=LOG_LOCAL0 # Uncomment these lines to enter debugging mode #fork=no log_stderror=yes listen=xxx.xxx.10.12 check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" # ------------------ module loading ---------------------------------- mpath = "/usr/local/lib/openser/modules/" # Uncomment this if you want to use SQL database loadmodule "mysql.so" loadmodule "domain.so" loadmodule "mediaproxy.so" loadmodule "uri_db.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "avpops.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "nathelper.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "auth.so" loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "timer_interval", 20) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 1) #cambio 16_04_07 modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") #puesto para el CDRTool modparam("acc", "failed_transaction_flag", 1) modparam("acc", "report_cancels", 0) modparam("acc", "report_ack", 0) modparam("acc", "early_media", 0) modparam("acc", "log_level", 1) #modparam("acc", "radius_config", "/etc/openser/radius/client.conf") modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp;\ Sip-RPid=$avp(s:rpid); \ Source-IP=$si; \ Source-Port=$sp; \ Canonical-URI=$avp($can_uri); \ Billing-Party=$avp($billing_party); \ Divert-Reason=$avp(s:divert_reason); \ X-RTP-Stat=$avp(s:rtp_statistics); \ From-Header=$hdr(from); \ User-Agent=$hdr(user-agent); \ Contact=$hdr(contact); \ Event=$hdr(event)") # SIP-Proxy-IP=$avp(s:sip_proxy_ip)") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- avpops params -- #modparam("avpops", "avp_aliases", "day=i:101;time=i:102") modparam("avpops","avp_aliases","can_uri=i:34") modparam("avpops","avp_aliases","billing_party=i:1") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) modparam("mediaproxy", "natping_interval", 60) modparam("registrar", "nat_flag", 2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # setflag(ACCOUNTING_FLAG); # avp_write("SER_IP","$avp(s:sip-proxy)"); # avp_write("$ru", "$avp(can_uri)"); # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); setflag(1); } route(1); }; if (src_ip==193.36.177.227) { fix_nated_sdp("2"); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags setflag(1); setflag(2); }; if (method=="MESSAGE") { setflag(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication # if (!www_authorize("sip.com", "subscriber")) { # www_challenge("sip.com", "0"); # exit; # }; if (!radius_www_authorize("")) { www_challenge("","1"); exit; } if (client_nat_test("3")) { setflag(2); force_rport(); fix_contact(); }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { # log to acc as missed call acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; }; if (method=="INVITE") { t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") { end_media_session(); }; if (loose_route()) { if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri==" sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; t_relay(); return; }; if (client_nat_test("3") && !search("^Record-Route:")) { # Mark as NAT'ed force_rport(); fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; #if ((method=="INVITE" || method=="ACK") && !to_uri==" sip:frog1@xxx.xxx.10.12") { # use_media_proxy(); #}; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; append_hf("P-hint: usrloc applied\r\n"); # route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; }

1 0

[OpenSER-Users] ERROR: presence_xml:get_final_notify_body?
by KevinKinnan 17 Jan '08

17 Jan '08

The debug log in 9 level is attached. K, _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

Re: [OpenSER-Users] openSER Call Route Logic
by Patrick Baker 17 Jan '08

17 Jan '08

Sipwise.com might help ----- Original Message ----- From: users-bounces(a)lists.openser.org <users-bounces(a)lists.openser.org> To: users(a)lists.openser.org <users(a)lists.openser.org> Sent: Wed Jan 16 23:48:27 2008 Subject: [OpenSER-Users] openSER Call Route Logic Hi, I recently installed openser-1.3.0 and able to connect my cisco sip phones and everything is working. Now i need to integrate this with asterisk box for call forwarding to other locations & voicemails. i read the getting started guide and other information, but seems i need more help from the group. can any one give me a helping hand. i am sure i will do my home work before bug you again. I need a starting point to over come the complexity of the routing plan and logic. thanks -asterisk user ________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. <http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/c…>

3 3

Re: [OpenSER-Users] MySQL Alternative (help!)
by Douglas Garstang 17 Jan '08

17 Jan '08

Henning, Let me try asking my question another way. Is it possible to use avp_db_query() with UnixODBC? If so, how? Douglas. ----- Original Message ---- From: Henning Westerholt <henning.westerholt(a)1und1.de> To: users(a)lists.openser.org Cc: Douglas Garstang <dougmig33(a)yahoo.com> Sent: Thursday, January 17, 2008 1:15:09 AM Subject: Re: [OpenSER-Users] MySQL Alternative On Thursday 17 January 2008, Douglas Garstang wrote: > What other options do I have for generic database connectivity besides > MySQL/avp_db_query() in OpenSER? > > Can I use SQLite? Can I use unixodbc? (and I'm not talking about the > limited built in usrloc unixodbc stuff) Hi Douglas, don't know what you mean with the builtin ODBC stuff in usrloc.. I assume that you talking about connectivity options for OpenSER. Available database modules that can be used with most modules: MySQL PostgreSQL UnixODBC (should work with Oracle, MS-SQL, SQLite and other) dbtext db_berkeley (Berkeley DB) Interfaces roughly sorted in terms of maturity, stability.. Most people uses MySQL, so this is the best tested option. Cheers, Henning ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[OpenSER-Users] Duplicated entries in "location" table when using "db_mode 3"
by Iñaki Baz Castillo 17 Jan '08

17 Jan '08

Hi, I use ("usrloc", "db_mode", 3) since some months and I've realized that many times I get duplicated entries in location table. Those entries have **exactly** the same values in all the columns. Note that is a testing serer which I restart 10 or 20 times each hour XD and that I've upgraded from 1.2 to 1.3 getting always this issue. If I send a new REGISTER (refresh) for an AoR with duplicated entries both entries are updated according to the new "expires" and CSEQ. Is it normal? -- Iñaki Baz Castillo

1 0

Re: [OpenSER-Users] best response seems wrong.
by Aymeric Moizard 17 Jan '08

17 Jan '08

(sorry: just repost to follow correct thread/subjet) I just found another example from rfc3261 where an endpoint will use 5xx class answer: 12.2.2 UAS Behavior Page 76: If the remote sequence number is empty, it MUST be set to the value of the sequence number in the CSeq header field value in the request. If the remote sequence number was not empty, but the sequence number of the request is lower than the remote sequence number, the request is out of order and MUST be rejected with a 500 (Server Internal Error) response. Hope I convinced you! tks, Aymeric MOIZARD / ANTISIP amsip - http://www.antisip.com osip2 - http://www.osip.org eXosip2 - http://savannah.nongnu.org/projects/exosip/ On Wed, 16 Jan 2008, Iñaki Baz Castillo wrote: > On Wednesday 16 January 2008 13:44:10 A.smith wrote: > >> If I try and use the whole example cfg (not just the route) I am recieving >> an error like: >> >> 0(23448) find_cmd_export_t: <lookup> not found >> 0(23448) parse error (105,23-24): unknown command, missing loadmodule? > > "lookup()" is defined in "registrar" module that you are not loading: > http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN342 > > -- > Iñaki Baz Castillo > ibc(a)in.ilimit.es > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users >

5 20

[OpenSER-Users] xlite with openser / hello world posts
by A.smith 17 Jan '08

17 Jan '08

1 0

[OpenSER-Users] Presence + XCAP issue
by Leonard Broman 17 Jan '08

17 Jan '08

Hi! I have an issue with the presence/xml/xcap modules. I'm trying to run the presence server without an "integrated" xcap server, since I have not managed to get openXCAP running on CentOS. However, for the moment I'd prefer not to be depending on it. I suppose this might be the root of my problem, as follows. Publish is working fine. But Subscribe is always answered with a 481 (which shouldn't occur normally) and I get this log: Jan 17 10:57:16 m2lin3 ./openser[7097]: ERROR:presence:get_stored_info: record not found in hash_table Jan 17 10:57:16 m2lin3 ./openser[7097]: ERROR:presence:handle_subscribe: getting stored info My primary question is wheather the this error is caused by the absence of documents in the xcap table? And if so can I do something to avoid this dependence? /Leo

1 0

[OpenSER-Users] openser 1.4 blocks
by Helmut Kuper 17 Jan '08

17 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, when I send the following SIP-Message on my openser, openser blocks and eats nearly all CPU power it can get: BYE sip:80.228.245.138:5070 SIP/2.0 Via: SIP/2.0/UDP 212.6.95.88:1028;branch=z9hG4bK-7rhl6qnns4ej;rport Route: <sip:212.6.123.118;lr=on;ftag=7w4sllx8cc> Route: <sip:212.6.123.118:5090;lr;ftag=7w4sllx8cc;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--> Route: <sip:Gk-int@80.228.245.176:5050;lr> From: "HK SoftSwitch" <sip:v101@sip0.en.ewetel.de>;tag=7w4sllx8cc To: <sip:12345@sip0.en.ewetel.de;user=phone>;tag=0082-00000054-0103i0 Call-ID: 3c26c9bec396-loo61fn1yu42 CSeq: 3 BYE Max-Forwards: 70 Contact: <sip:v101@212.6.95.88:1028;line=nopsgn9d>;flow-id=1 User-Agent: snom370/7.1.30 RTP-RxStat: Total_Rx_Pkts=120,Rx_Pkts=120,Rx_Pkts_Lost=0,Remote_Rx_Pkts_Lost=0 RTP-TxStat: Total_Tx_Pkts=2263,Tx_Pkts=2263,Remote_Tx_Pkts=160 Content-Length: 0 What openser does is authentication, avp db loading an then a simple t_relay(). opensers debuglog (level 8) is this: Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:check_via_address: params 212.6.95.88, 212.6.95.88, 0 Jan 16 21:30:45 [8406] DBG:sl:run_sl_callbacks: callback id 0 entered Jan 16 21:30:45 [8406] DBG:siptrace:trace_sl_onreply_out: trace off... Jan 16 21:30:45 [8406] DBG:core:destroy_avp_list: destroying list 0xb5b00e50 Jan 16 21:30:45 [8406] DBG:core:receive_msg: cleaning up Jan 16 21:30:45 [8406] DBG:core:parse_msg: SIP Request: Jan 16 21:30:45 [8406] DBG:core:parse_msg: method: <BYE> Jan 16 21:30:45 [8406] DBG:core:parse_msg: uri: <sip:80.228.245.138:5080> Jan 16 21:30:45 [8406] DBG:core:parse_msg: version: <SIP/2.0> Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=2 Jan 16 21:30:45 [8406] DBG:core:parse_via_param: found param type 232, <branch> = <z9hG4bK-goxekiv4ggfm>; state=6 Jan 16 21:30:45 [8406] DBG:core:parse_via_param: found param type 235, <rport> = <n/a>; state=17 Jan 16 21:30:45 [8406] DBG:core:parse_via: end of header reached, state=5 Jan 16 21:30:45 [8406] DBG:core:parse_headers: via found, flags=2 Jan 16 21:30:45 [8406] DBG:core:parse_headers: this is the first via Jan 16 21:30:45 [8406] DBG:core:receive_msg: After parse_msg... Jan 16 21:30:45 [8406] DBG:core:receive_msg: preparing to run routing scripts... BYE--------------------------------------------------------------------- [Wed Jan 16 21:30:45 2008] - NEW TRANSACTION! Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Jan 16 21:30:45 [8406] DBG:core:parse_to_param: tag=0082-0000004f-00e7i0 Jan 16 21:30:45 [8406] DBG:core:parse_to: end of header reached, state=29 Jan 16 21:30:45 [8406] DBG:core:parse_to: display={}, ruri={sip:044180002850@sip0.en.ewetel.de;user=phone} Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: <To> [74]; uri=[sip:044180002850@sip0.en.ewetel.de;user=phone] Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: to body [<sip:044180002850@sip0.en.ewetel.de;user=phone>] Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: cseq <CSeq>: <4> <BYE> Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: start searching: hash=36300, isACK=0 Jan 16 21:30:45 [8406] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: no transaction found Jan 16 21:30:45 [8406] DBG:core:parse_to_param: tag=bpl4kg8f57 Jan 16 21:30:45 [8406] DBG:core:parse_to: end of header reached, state=29 Jan 16 21:30:45 [8406] DBG:core:parse_to: display={"HK SoftSwitch"}, ruri={sip:v101@sip0.en.ewetel.de} MAIN : New Message <BYE> From: sip:v101@sip0.en.ewetel.de, To: sip:80.228.245.138:5080 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=100 Jan 16 21:30:45 [8406] DBG:maxfwd:is_maxfwd_present: value = 70 Route 22: Check type of source ... Jan 16 21:30:45 [8406] DBG:permissions:allow_source_address: looking for <1, 585f06d4, 1028> Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=800000000 Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: content_length=0 Jan 16 21:30:45 [8406] DBG:core:get_hdr_field: found end of header Jan 16 21:30:45 [8406] DBG:core:pv_get_ppi_attr: no P-Preferred-Identity header Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 17==13 && [sip0.en.ewetel.de] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 17==13 && [sip0.en.ewetel.de] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:avpops:ops_dbquery_avps: query [SELECT uri_user FROM uri WHERE username='v101' AND domain='sip0.en.ewetel.de' LIMIT 1] Jan 16 21:30:45 [8406] DBG:avpops:db_query_avp: rows [1] Jan 16 21:30:45 [8406] DBG:avpops:db_query_avp: row [0] Jan 16 21:30:45 [8406] DBG:avpops:db_close_query: close avp query Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 1 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81dde58 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81dde58=pkg_free() RES_ROWS From-URI belongs to xxxxxxxxxxx Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:auth:check_nonce: comparing [478e6aa112f6919eb75ced3104f1774c59a1ce01] and [478e6aa112f6919eb75ced3104f1774c59a1ce01] Jan 16 21:30:45 [8406] DBG:auth_db:get_ha1: HA1 string calculated: 98eb7bda25d62322c1ff8261c216e8ad Jan 16 21:30:45 [8406] DBG:auth:check_response: our result = '43c9a3529f44aa0e6dda2f6f0894632c' Jan 16 21:30:45 [8406] DBG:auth:check_response: authorization is OK Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 1 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81dde88 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81dde88=pkg_free() RES_ROWS Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:comp_scriptvar: str 29 : xxxxxxxxx Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Route 04: <BYE>-Authentication OK Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=14000 Route 07: <BYE>: Loading A-Profile ... Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=2, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:dbrow2avp: db_flags=0, flags=3 Jan 16 21:30:45 [8406] DBG:avpops:db_close_query: close avp query Jan 16 21:30:45 [8406] DBG:core:db_free_rows: freeing 15 rows Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[0]=0x81de068 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[1]=0x81de070 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[2]=0x81de078 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[3]=0x81de080 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[4]=0x81de088 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[5]=0x81de090 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[6]=0x81de098 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[7]=0x81de0a0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[8]=0x81de0a8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[9]=0x81de0b0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[10]=0x81de0b8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[11]=0x81de0c0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[12]=0x81de0c8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[13]=0x81de0d0 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: row[14]=0x81de0d8 Jan 16 21:30:45 [8406] DBG:core:db_free_rows: 0x81de068=pkg_free() RES_ROWS Jan 16 21:30:45 [8406] DBG:avpops:ops_dbload_avps: loaded avps = 15 OK Jan 16 21:30:45 [8406] DBG:core:comp_scriptvar: int 20 : 1 / 1 MAIN : <BYE>: From-Data is: User='v101', Domain='sip0.en.ewetel.de', URI='sip:v101@sip0.en.ewetel.de' Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=200 Jan 16 21:30:45 [8406] DBG:rr:is_preloaded: is_preloaded: No Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:check_self: host != me Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 13==13 && [212.6.123.118] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:rr:after_loose: Topmost route URI: 'sip:212.6.123.118;lr=on;ftag=bpl4kg8f57' is me Jan 16 21:30:45 [8406] DBG:rr:after_loose: URI to be processed: 'sip:212.6.123.118:5090;lr;ftag=bpl4kg8f57;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--' Jan 16 21:30:45 [8406] DBG:rr:after_loose: Next URI is a loose router Jan 16 21:30:45 [8406] DBG:rr:run_rr_callbacks: callback id 0 entered with <lr=on;ftag=bpl4kg8f57> DEBUG:uac:restore_from: getting 'vsf' Route param DEBUG:uac:restore_from: Route param 'vsf' not found Jan 16 21:30:45 [8406] DBG:avpops:ops_check_avp: check <17> against <8> as int /256 Jan 16 21:30:45 [8406] DBG:avpops:ops_check_avp: no match Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=200 Jan 16 21:30:45 [8406] DBG:rr:is_preloaded: is_preloaded: No Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 14==13 && [80.228.245.138] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5080 Jan 16 21:30:45 [8406] DBG:core:check_self: host != me Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if host==us: 13==13 && [212.6.123.118] == [212.6.123.118] Jan 16 21:30:45 [8406] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 16 21:30:45 [8406] DBG:rr:after_loose: Topmost route URI: 'sip:212.6.123.118;lr=on;ftag=bpl4kg8f57' is me Jan 16 21:30:45 [8406] DBG:rr:after_loose: URI to be processed: 'sip:212.6.123.118:5090;lr;ftag=bpl4kg8f57;vsf=ZlRqaD8wOzEbMTUlTiwzCnRNJ2F0eDBzMTZ0HVdlUg--' Jan 16 21:30:45 [8406] DBG:rr:after_loose: Next URI is a loose router Jan 16 21:30:45 [8406] DBG:rr:run_rr_callbacks: callback id 0 entered with <lr=on;ftag=bpl4kg8f57> DEBUG:uac:restore_from: getting 'vsf' Route param DEBUG:uac:restore_from: Route param 'vsf' not found MAIN : Loose-Route Jan 16 21:30:45 [8406] DBG:uri:has_totag: totag found Route 08: <BYE>: Set Accounting for this call! Route 11: Removing secret Headers Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:registrar:lookup: '80.228.245.138' Not found in usrloc Route 01: Relaying BYE: RURI=sip:80.228.245.138:5080 F=sip:v101@sip0.en.ewetel.de IP=212.6.95.88; Calltimeout=<null> [Wed Jan 16 21:30:45 2008] Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Route 01: Next Hop DST-Set Jan 16 21:30:45 [8406] DBG:tm:t_newtran: transaction on entrance=(nil) Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=ffffffffffffffff Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: start searching: hash=36300, isACK=0 Jan 16 21:30:45 [8406] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 16 21:30:45 [8406] DBG:tm:t_lookup_request: no transaction found Jan 16 21:30:45 [8406] DBG:tm:run_reqin_callbacks: trans=0xb5b01048, callback type 1, id 1 entered Jan 16 21:30:45 [8406] DBG:siptrace:trace_onreq_in: trace off... Jan 16 21:30:45 [8406] DBG:tm:run_reqin_callbacks: trans=0xb5b01048, callback type 1, id 0 entered Jan 16 21:30:45 [8406] DBG:core:parse_headers: flags=78 Any ideas, why it hangs eating all my cpu power ? regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHjmra4tZeNddg3dwRAvu4AJ4rK5jCbKF9UDGu8FP1suEyRHkwigCeM58p K5a16nleRI+zZujWTI0Ntfs= =XJqP -----END PGP SIGNATURE-----

2 3

[OpenSER-Users] Compilation Problem - please help me.
by Noble Antony T 17 Jan '08

17 Jan '08

Hi, I was trying to install Openser with RLS support, I got an error message, *In file included from notify.h:31, from hash.c:37: presentity.h:36:27: libxml/parser.h: No such file or directory make[1]: *** [hash.o] Error 1 make[1]: Leaving directory `/home/nthattil/openser-1.3.x/modules/presence' make: *** [modules] Error 2 * I had installed libxml2 already, * libxml2.so.2 libxml2.so.2.6.27* the above modules are present in folder /usr/lib/ I am using the machine, *Linux version 2.6.18 (gcc version 3.3.5 (Debian 1:3.3.5-13)) #1 SMP Thu Jul 26 01:27:32 EDT 2007 * I edited the Makefile and updated the line as follows, *exclude_modules?= jabber cpl-c postgres osp unixodbc \ avp_radius auth_radius group_radius uri_radius xmpp \ presence_xml presence_mwi pua_bla pua_mi \ pua_usrloc pua_xmpp mi_xmlrpc perl snmpstats perlvdb \ ldap carrierroute h350 xcap_client db_berkeley seas * I gave command prompt$ *make all* for compiling. I am getting the error message as shown above. Please mail me if I am missing something.. -- Noble Antony Thattil, Bangalore.

3 2

[OpenSER-Users] openSER Call Route Logic
by asterisk User 17 Jan '08

17 Jan '08

Hi, I recently installed openser-1.3.0 and able to connect my cisco sip phones and everything is working. Now i need to integrate this with asterisk box for call forwarding to other locations & voicemails. i read the getting started guide and other information, but seems i need more help from the group. can any one give me a helping hand. i am sure i will do my home work before bug you again. I need a starting point to over come the complexity of the routing plan and logic. thanks -asterisk user --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search.

2 1

[OpenSER-Users] How to interacte X-lite and openser
by hammou moujane 17 Jan '08

17 Jan '08

Hello All, I have installed openser, is it possible to make voice call between two x-lite softphone using this SIP server? how can I start this operation if it's possible? Thankyou very much for your help. Regards -- Hammou MOUJANE Tel: +212 62 46 33 89 INPT

2 1

[OpenSER-Users] MySQL Alternative
by Douglas Garstang 17 Jan '08

17 Jan '08

What other options do I have for generic database connectivity besides MySQL/avp_db_query() in OpenSER? Can I use SQLite? Can I use unixodbc? (and I'm not talking about the limited built in usrloc unixodbc stuff) Thanks, Doug. ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

Re: [OpenSER-Users] {Spam?} Hello World Config problem
by Andy Smith 16 Jan '08

16 Jan '08

Hi! Ok, thanks that problem solved and now I have another! I get the error "Registration error: 404 - Not Found" in Xlite. If I comment out this section of the cfg file I then get an error "Too Many Hops" :S :SMy laptop is directly (virtually on VPN) connected to the same LAN as the openser server.Any ideas? Or anyone have an already working hello world config??thanks in advance, Andy.On Wednesday 16 January 2008 15:51:58 Andy Smith wrote: > Thanks Iñaki, ok now my openser starts up ok, but I get the same "filtered > destination" Try adding: disable_dns_blacklist=yes at the top of your script.

1 0

[OpenSER-Users] Problems with unixodbc driver
by Alcindo Schleder 16 Jan '08

16 Jan '08

Hi.. I´m using unixodbc driver to connect with firebird SGDB. The problem is that the unixodbc driver not connect... ERROR:unixodbc:new_connection: failed to connect Jan 15 14:19:06 xsip openser[4577]: unixodbc:SQLDriverConnect=08004:1:-904:[unixODBC][ODBC Firebird Driver]Unable to connect to data source: library 'libfbclient.so' failed to load Jan 15 14:19:06 xsip openser[4577]: ERROR: group_db_bind: unable to connect to the database Jan 15 14:19:06 xsip openser[4577]: ERROR:group:mod_init: unable to open database connection

2 4

Re: [OpenSER-Users] {Spam?} Hello World Config problem
by Andy Smith 16 Jan '08

16 Jan '08

Thanks Iñaki, ok now my openser starts up ok, but I get the same "filtered destination" error from Xlite as I was getting with my original openser cfg with the hello world route. I was hoping the hello world config would allow me to connect/register whatever SIP device without any specific password :S thanks Andy.On Wednesday 16 January 2008 13:44:10 A.smith wrote: > If I try and use the whole example cfg (not just the route) I am recieving > an error like: > > 0(23448) find_cmd_export_t: <lookup> not found > 0(23448) parse error (105,23-24): unknown command, missing loadmodule? "lookup()" is defined in "registrar" module that you are not loading: http://www.openser.org/docs/modules/1.2.x/registrar.html#AEN342 -- Iñaki Baz Castillo ibc at in.ilimit.es

2 1

[OpenSER-Users] Hello World Config problem
by A.smith 16 Jan '08

16 Jan '08

HI, As I dont currently have a working PSTN I wanted to get the hello world config working so I can generate calls from one IP phone to another just across my LAN. However with the route config (put into my previous working registrar test cfg) from this example: http://openser.oralnet.co.uk/#AEN424 I am recieving a "filtered destination" error from XLite when it attempts to register. I can see the packets hitting my server from tcpdump... If I try and use the whole example cfg (not just the route) I am recieving an error like: 0(23448) find_cmd_export_t: <lookup> not found 0(23448) parse error (105,23-24): unknown command, missing loadmodule? Any help or tips on diagnosing this would be greatly appreciated! I am using OpenSER 1.2.2 on CentOS Linux... thanks Andy. ________________________________________________ Message sent using UK Grid Webmail 2.7.9

3 2

[OpenSER-Users] Openser + Wesip Click2dial
by [ACTIVENDY] NOC 16 Jan '08

16 Jan '08

Hi, I've installed my Openser with Wesip Application Server. I've installed Wesip with Click2dial application from Wesip web site. The application is running, but when I try to call to a softphone sip address trough my browser I get an error code -2. In Wesip logs I get the following: CommonsLoggingOutput [HttpProcessor[7080][4]] - Exec: Click2Call.c2cDWR() CommonsLoggingOutput [HttpProcessor[7080][4]] - --Object created, not stored. id=0 MapFactory [HttpProcessor[7080][4]] - Unable to create class java.util.Hashtable returning HashTable instead StandardSipSession [HttpProcessor[7080][4]] - Transport: udp SipRequest [HttpProcessor[7080][4]] - ERROR sending message javax.sip.TransactionUnavailableException: no route! at com.voztele.javax.sip.SipProviderImpl.getNewClientTransaction(SipProviderImpl.java:264) at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:196) at com.voztele.wesip.apps.click2call.C2C.c2c(C2C.java:134) at com.voztele.wesip.apps.click2call.C2C.c2cDWR(C2C.java:99) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.directwebremoting.impl.ExecuteAjaxFilter.doFilter(ExecuteAjaxFilter.java:34) at org.directwebremoting.impl.DefaultRemoter$1.doFilter(DefaultRemoter.java:428) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:431) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:283) at org.directwebremoting.servlet.PlainCallHandler.handle(PlainCallHandler.java:52) at org.directwebremoting.servlet.UrlProcessor.handle(UrlProcessor.java:101) at org.directwebremoting.servlet.DwrServlet.doPost(DwrServlet.java:146) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:206) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedContextValve.invokeHTTP(ConvergedContextValve.java:144) at com.voztele.sipservlet.valves.ConvergedContextValve.invoke(ConvergedContextValve.java:64) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.core.StandardHttpContext.invoke(StandardHttpContext.java:2377) at com.voztele.sipservlet.core.ConvergedContext.invoke(ConvergedContext.java:98) at com.voztele.sipservlet.valves.ConvergedHostValve.invokeHTTP(ConvergedHostValve.java:336) at com.voztele.sipservlet.valves.ConvergedHostValve.invoke(ConvergedHostValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:124) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedEngineValve.invoke(ConvergedEngineValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:994) at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1105) at java.lang.Thread.run(Thread.java:619) java.lang.RuntimeException: javax.sip.TransactionUnavailableException: no route! at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:222) at com.voztele.wesip.apps.click2call.C2C.c2c(C2C.java:134) at com.voztele.wesip.apps.click2call.C2C.c2cDWR(C2C.java:99) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.directwebremoting.impl.ExecuteAjaxFilter.doFilter(ExecuteAjaxFilter.java:34) at org.directwebremoting.impl.DefaultRemoter$1.doFilter(DefaultRemoter.java:428) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:431) at org.directwebremoting.impl.DefaultRemoter.execute(DefaultRemoter.java:283) at org.directwebremoting.servlet.PlainCallHandler.handle(PlainCallHandler.java:52) at org.directwebremoting.servlet.UrlProcessor.handle(UrlProcessor.java:101) at org.directwebremoting.servlet.DwrServlet.doPost(DwrServlet.java:146) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:200) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:146) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:206) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedContextValve.invokeHTTP(ConvergedContextValve.java:144) at com.voztele.sipservlet.valves.ConvergedContextValve.invoke(ConvergedContextValve.java:64) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.core.StandardHttpContext.invoke(StandardHttpContext.java:2377) at com.voztele.sipservlet.core.ConvergedContext.invoke(ConvergedContext.java:98) at com.voztele.sipservlet.valves.ConvergedHostValve.invokeHTTP(ConvergedHostValve.java:336) at com.voztele.sipservlet.valves.ConvergedHostValve.invoke(ConvergedHostValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:124) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:594) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at com.voztele.sipservlet.valves.ConvergedEngineValve.invoke(ConvergedEngineValve.java:98) at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:596) at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:433) at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:946) at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:994) at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1105) at java.lang.Thread.run(Thread.java:619) Caused by: javax.sip.TransactionUnavailableException: no route! at com.voztele.javax.sip.SipProviderImpl.getNewClientTransaction(SipProviderImpl.java:264) at com.voztele.sipservlet.core.SipRequest.send(SipRequest.java:196) ... 44 more My configuration is: - openser.cfg debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=MY_IP_ADDRESS mpath="/lib/openser/modules" loadmodule "mi_fifo.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "seas.so" modparam("mi_fifo","fifo_name", "/tmp/openser_fifo") modparam("usrloc", "db_mode", 0) modparam("rr", "enable_full_lr", 1) modparam("seas", "listen_sockets", "MY_IP_ADDRESS:5080") route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; if (!method=="REGISTER") record_route(); if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if(!as_relay_t("wesip")){ t_reply("500","Application Server error"); } } - server.xml <Server port="5005" shutdown="SHUTDOWN" debug="0"> <Service name="WeSIP-Standalone"> <Connector className="org.apache.catalina.connector.http.HttpConnector" port="7080" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" /> <Connector className="com.voztele.sipservlet.connector.SipConnector" minProcessors="5" maxProcessors="75" enableLookups="true" acceptCount="10" debug="0" addresses="217.172.74.8:5060" pathName="com.voztele" protocol="udp" > <ExtraProperties> <Property key="com.voztele.javax.sip.SER_ADDRESS" value="MY_IP_ADDRESS" /> <Property key="com.voztele.javax.sip.SER_PORT" value="5080" /> <Property key="com.voztele.STATISTICS" value="false" /> <Property key="javax.sip.STACK_NAME" value="wesip" /> <Property key="javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.THREAD_POOL_SIZE" value="100" /> <Property key="com.voztele.javax.sip.REENTRANT_LISTENER" value="true" /> <Property key="javax.sip.AUTOMATIC_DIALOG_SUPPORT" value="false" /> <Property key="com.voztele.javax.sip.TRACE_LEVEL" value="0" /> </ExtraProperties> </Connector> <Engine name="Standalone" defaultHost="217.172.74.8" debug="0" className="com.voztele.sipservlet.core.ConvergedEngine"> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.StandardEngineMapper" protocol="HTTP/1.0"/> <Mapper className="com.voztele.sipservlet.core.EngineSipMapper" protocol="SIP/2.0"/> <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Realm className="org.apache.catalina.realm.MemoryRealm" /> <Host name="MY_IP_ADDRESS" nameSip="MY_IP_ADDRESS_5060" debug="0" appBase="wesipapps" unpackWARs="true" autoDeploy="true" className="com.voztele.sipservlet.core.ConvergedHost">  <Logger className="org.apache.catalina.logger.FileLogger" timestamp="true"/> <Mapper className="com.voztele.sipservlet.core.SipHostMapper" protocol="SIP/2.0"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.1"/> <Mapper className="org.apache.catalina.core.HttpHostMapper" protocol="HTTP/1.0"/>  </Host> </Engine> </Service> </Server> Thanks in advance, Sergi

2 2

[OpenSER-Users] How to convert 183 to 180 message
by Tung Tran 16 Jan '08

16 Jan '08

3 3

[OpenSER-Users] OpenSER config Wiz - What does it do? :P
by A.smith 16 Jan '08

16 Jan '08

Hi, Slightly stupid question I know, what I mean is that the config contains no rewrite host so Im just wondering whether the configs that the wizard generate are actually useable for something without modification. I ask because I want to understand what the wizard is trying to produce so I know if its appropriate for me to try and modify the config to match my requirements or Im better to start from scratch. And yes, I know I dont know much about OpenSER! :P Im trying to learn! thanks Andy. ________________________________________________ Message sent using UK Grid Webmail 2.7.9

1 0

[OpenSER-Users] Variable $rc
by Douglas Garstang 16 Jan '08

16 Jan '08

What's the point of the pseudo variable $rc? If I use avp_db_query() with: invalid SQL, then rc = -1. database down: then rc = -1. Everything fine... then rc = -1!!! What's the point? Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

4 3

[OpenSER-Users] Presence Problem on v1.3.0
by fengbin 16 Jan '08

16 Jan '08

Hi,All When I tried to start openser with presence module.I met an error of "ERROR:core:set_mod_param_regex: parameter <force_active> not found in module <presence>" But I used the presence before with openser of v1.2.0 and it works fine. Can you take a look at it? THX BR The encolsed is my config file. -- Fengbin

2 1

[OpenSER-Users] Openser and RTPProxy
by Patrick Baker 16 Jan '08

16 Jan '08

Is is possible to have a SIP UA behind nat and communicate to an OpenSER/RTP Proxy server behind nat behind nat and have everything transverse appropriately? Or will I need something additional like STUN? Example: OpenSER + RTP Proxy + Asterisk will all reside on the same machine. SIP UA -> Cisco PIX ( Public IP to Localnet NAT ) -> OpenSER/RTP -> Asterisk Thank you for your time, Patrick

4 7

[OpenSER-Users] OpenSer 1.3 Presence Problem
by Ross Beer 15 Jan '08

15 Jan '08

Hi All, I am trying to setup an OpenSER server with support for registration, messaging & presence however I am having a problem with the presence server. I have had presence working correctly before, however for some reason it is no longer working. I have spent about two days trying everything! I would really appreciate some advice with this. I have included my config below. Thank you in advance, Ross ------------------------------------------------------------------------------ listen = udp:my.ip.address:5060 mpath = "/usr/local/lib64/openser/modules" children = 8 debug = 3 fork = yes disable_tcp = no #log_facility = LOG_DAEMON log_facility = LOG_LOCAL0 log_stderror = yes tcp_children = 4 mhomed = no server_signature = yes #sock_group = "openser" #sock_mode = 0600 #sock_user = "openser" #unix_sock = "/tmp/openser.sock" #unix_sock_children = 1 #reply_to_via = no #sip_warning = no #check_via = no #dns = no #rev_dns = no #disable_core_dump = no #dns_try_ipv6 = yes #dns_use_search_list = yes loadmodule "usrloc.so" modparam("usrloc", "user_column", "username") modparam("usrloc", "domain_column", "domain") modparam("usrloc", "contact_column", "contact") modparam("usrloc", "expires_column", "expires") modparam("usrloc", "q_column", "q") modparam("usrloc", "callid_column", "callid") modparam("usrloc", "cseq_column", "cseq") modparam("usrloc", "methods_column", "methods") modparam("usrloc", "flags_column", "flags") modparam("usrloc", "user_agent_column", "user_agent") modparam("usrloc", "received_column", "received") modparam("usrloc", "socket_column", "socket") modparam("usrloc", "use_domain", 0) modparam("usrloc", "desc_time_order", 0) modparam("usrloc", "timer_interval", 60) modparam("usrloc", "db_url", "mysql://username:password@localhost/openser") modparam("usrloc", "db_mode", 1) modparam("usrloc", "matching_mode", 0) modparam("usrloc", "cseq_delay", 20) modparam("usrloc", "nat_bflag", 6) loadmodule "registrar.so" modparam("registrar", "default_expires", 3600) modparam("registrar", "min_expires", 60) modparam("registrar", "max_expires", 0) modparam("registrar", "default_q", 0) modparam("registrar", "append_branches", 1) modparam("registrar", "case_sensitive", 0) modparam("registrar", "received_param", "received") modparam("registrar", "max_contacts", 0) modparam("registrar", "retry_after", 0) modparam("registrar", "method_filtering", 0) modparam("registrar", "path_mode", 2) modparam("registrar", "path_use_received", 0) modparam("registrar", "received_avp", "$avp(i:801)") loadmodule "rr.so" modparam("rr", "enable_full_lr", 1) modparam("rr", "append_fromtag", 1) modparam("rr", "enable_double_rr", 1) modparam("rr", "add_username", 0) loadmodule "tm.so" modparam("tm", "fr_timer", 30) modparam("tm", "fr_inv_timer", 120) modparam("tm", "wt_timer", 5) modparam("tm", "delete_timer", 2) modparam("tm", "noisy_ctimer", 0) modparam("tm", "ruri_matching", 1) modparam("tm", "via1_matching", 1) modparam("tm", "unix_tx_timeout", 2) modparam("tm", "restart_fr_on_each_reply", 1) modparam("tm", "pass_provisional_replies", 0) loadmodule "xlog.so" modparam("xlog", "buf_size", 4096) modparam("xlog", "force_color", 1) loadmodule "mi_fifo.so" modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") #modparam("mi_fif0", "fifo_name", "FIFO") modparam("mi_fifo", "fifo_mode", 0660) #modparam("mi_fifo", "fifo_group", "openser") #modparam("mi_fifo", "fifo_user", "openser") modparam("mi_fifo", "reply_dir", "/tmp/") modparam("mi_fifo", "reply_indent", "\t") loadmodule "domain.so" modparam("domain", "db_url", "mysql://username:password@localhost/openser") modparam("domain", "db_mode", 1) modparam("domain", "domain_table", "domain") modparam("domain", "domain_col", "domain") loadmodule "nathelper.so" modparam("nathelper", "natping_interval", 0) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "") modparam("nathelper", "rtpproxy_disable_tout", 60) modparam("nathelper", "rtpproxy_tout", 1) modparam("nathelper", "rtpproxy_retr", 5) modparam("nathelper", "sipping_method", "OPTIONS") modparam("nathelper", "received_avp", "$avp(i:801)") loadmodule "textops.so" loadmodule "mediaproxy.so" #modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock") modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy", "sip_asymmetrics", "/etc/openser/sip-asymmetric-clients") modparam("mediaproxy", "rtp_asymmetrics", "/etc/openser/rtp-asymmetric-clients") modparam("mediaproxy", "natping_interval", 60) loadmodule "uri.so" loadmodule "sl.so" modparam("sl", "enable_stats", 1) loadmodule "maxfwd.so" modparam("maxfwd", "max_limit", 256) loadmodule "mysql.so" modparam("mysql", "ping_interval", 300) modparam("mysql", "auto_reconnect", 1) loadmodule "auth.so" modparam("auth", "nonce_expire", 300) modparam("auth", "rpid_suffix", ";party=calling;id-type=subscriber;screen=yes") modparam("auth", "rpid_avp", "$avp(s:rpid)") loadmodule "auth_db.so" modparam("auth_db", "db_url", "mysql://username:password@localhost/openser") modparam("auth_db", "user_column", "username") modparam("auth_db", "domain_column", "domain") modparam("auth_db", "password_column", "password") #modparam("auth_db", "password_column_2", "ha1b") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "use_domain", 0) modparam("auth_db", "load_credentials", "$avp(s:caller_uuid)=id") loadmodule "uri_db.so" modparam("uri_db", "db_url", "mysql://username:password@localhost/openser") modparam("uri_db", "uri_table", "uri") modparam("uri_db", "uri_user_column", "username") modparam("uri_db", "uri_domain_column", "domain") modparam("uri_db", "uri_uriuser_column", "uri_user") modparam("uri_db", "subscriber_table", "subscriber") modparam("uri_db", "subscriber_user_column", "username") modparam("uri_db", "subscriber_domain_column", "domain") modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "use_domain", 0) loadmodule "avpops.so" modparam("avpops", "db_url", "mysql://username:password@localhost/openser") modparam("avpops", "avp_table", "usr_preferences") modparam("avpops", "use_domain", 0) modparam("avpops", "uuid_column", "id") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") loadmodule "enum.so" modparam("enum", "domain_suffix", "e164.org.") loadmodule "permissions.so" #modparam("permissions", "default_allow_file", "permissions.allow") #modparam("permissions", "default_deny_file", "permissions.deny") #modparam("permissions", "check_all_branches", 1) #modparam("permissions", "allow_suffix", ".allow") #modparam("permissions", "deny_suffix", ".deny") modparam("permissions", "db_url", "mysql://username:password@localhost/openser") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("permissions", "source_col", "src_ip") modparam("permissions", "proto_col", "proto") modparam("permissions", "from_col", "from_pattern") modparam("permissions", "tag_col", "tag") modparam("permissions", "peer_tag_avp", "$avp(i:707)") loadmodule "lcr.so" modparam("lcr", "db_url", "mysql://username:password@localhost/openser") modparam("lcr", "gw_table", "gw") modparam("lcr", "gw_name_column", "gw_name") modparam("lcr", "ip_addr_column", "ip_addr") modparam("lcr", "port_column", "port") modparam("lcr", "uri_scheme_column", "uri_scheme") modparam("lcr", "transport_column", "transport") modparam("lcr", "grp_id_column", "grp_id") modparam("lcr", "lcr_table", "lcr") modparam("lcr", "strip_column", "strip") modparam("lcr", "prefix_column", "prefix") modparam("lcr", "from_uri_column", "from_uri") modparam("lcr", "priority_column", "priority") modparam("lcr", "gw_uri_avp", "$avp(i:709)") modparam("lcr", "ruri_user_avp", "$avp(i:500)") modparam("lcr", "contact_avp", "$avp(i:711)") modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)") modparam("lcr", "fr_inv_timer", 90) modparam("lcr", "fr_inv_timer_next", 30) modparam("lcr", "rpid_avp", "$avp(i:302)") modparam("lcr", "dm_flag", 25) loadmodule "alias_db.so" modparam("alias_db", "db_url", "mysql://username:password@localhost/openser") modparam("alias_db", "user_column", "username") modparam("alias_db", "domain_column", "domain") modparam("alias_db", "alias_user_column", "alias_username") modparam("alias_db", "alias_domain_column", "alias_domain") modparam("alias_db", "use_domain", 0) # ----- presence params ----- loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_mwi.so" loadmodule "pua.so" loadmodule "pua_mi.so" loadmodule "pua_usrloc.so" modparam("presence|presence_xml", "db_url","mysql://username:password@localhost/openser") modparam("presence_xml", "force_active", 1) modparam("presence", "server_address", "sip:my.ip.address:5060") modparam("presence", "presentity_table", "presentity") modparam("presence", "active_watchers_table", "active_watchers") modparam("presence", "watchers_table", "watchers") modparam("presence", "clean_period", 100) modparam("presence", "max_expires", 3600) modparam("presence", "fallback2db", 1) modparam("presence_xml", "xcap_table", "xcap") modparam("presence_xml", "pidf_manipulation", 1) modparam("presence_xml", "integrated_xcap_server", 1) modparam("pua_usrloc", "default_domain", "my.domain.com") modparam("presence", "to_tag_pref", 'pres') ######################################################################## # Request route 'main' ######################################################################## route[0] { xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); force_rport(); if(msg:len > max_len) { xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("513", "Message Too Big"); exit; } if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("483", "Too Many Hops"); exit; } if(!is_method("REGISTER|MESSAGE")) { if(nat_uac_test("19")) { record_route(";nat=yes"); } else { record_route(); } } if(is_method("CANCEL") || is_method("BYE")) { end_media_session(); } if(loose_route()) { if(!has_totag()) { xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Initial Loose-Routing Rejected"); exit; } if(nat_uac_test("19") || search("^Route:.*;nat=yes")) { fix_nated_contact(); setbflag(6); } route(7); } if(is_method("REGISTER")) { route(6); } if(is_method("INVITE")) { route(8); } if(is_method("PUBLISH|SUBSCRIBE")) { route(17); } if(is_method("CANCEL") || is_method("ACK")) { route(14); } ############################ # MESSAGES # ############################ if(is_method("MESSAGE")) { route(18); } route(15); } ######################################################################## # Request route 'clear-usr-preferences-caller' ######################################################################## route[1] { xlog("L_INFO", "Clear caller preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } ######################################################################## # Request route 'clear-usr-preferences-callee' ######################################################################## route[2] { xlog("L_INFO", "Clear callee preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } ######################################################################## # Request route 'usr-preferences-caller' ######################################################################## route[3] { route(1); xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load caller avps avp_db_load("$avp(s:caller_uuid)", "*"); } ######################################################################## # Request route 'usr-preferences-callee' ######################################################################## route[4] { xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # load callee avps avp_db_load("$avp(s:callee_uuid)", "*"); } ######################################################################## # Request route 'stop-media-proxy' ######################################################################## route[5] { if(isflagset(22)) { end_media_session(); } } ######################################################################## # Request route 'base-route-register' ######################################################################## route[6] { sl_send_reply("100", "Trying"); if(!www_authorize("", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setbflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); exit; } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Request route 'base-outbound' ######################################################################## route[7] { xlog("L_INFO", "ROUTE 7 RUN - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(isbflagset(6)) { if(!isflagset(22) && !search("^Content-Length:[ ]*0")) { setflag(22); use_media_proxy(); } t_on_reply("2"); } else { t_on_reply("1"); } if(!isflagset(21)) { t_on_failure("2"); } if(isflagset(29)) { append_branch(); } if(is_present_hf("Proxy-Authorization")) { consume_credentials(); } xlog("L_INFO", "Request leaving server, D-URI='$du' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # no 100 (we already sent it) and no DNS blacklisting if(!t_relay("0x05")) { sl_reply_error(); if(is_method("INVITE") && isbflagset(6)) { end_media_session(); } } exit; } ######################################################################## # Request route 'base-route-invite' ######################################################################## route[8] { sl_send_reply("100", "Trying"); if(from_gw()) { $avp(s:caller_uuid) = "0"; xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); setflag(23); } else { if(allow_trusted()) { if(is_avp_set("$avp(s:peer_uuid)/s")) { # use tag-column from trusted-table as uuid for this caller avp_copy("$avp(s:peer_uuid)", "$avp(s:caller_uuid)/d"); } else { # if no uuid is set, use "0" as default uuid $avp(s:caller_uuid) = "0"; } xlog("L_INFO", "Call from trusted peer with uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(!is_domain_local("$rd")) { xlog("L_INFO", "Rejecting peering attempt with non-local request domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Relaying Denied"); exit; } setflag(23); } else { # if(!proxy_authorize("", "subscriber")) # { # # xlog("L_INFO", "Proxy authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # proxy_challenge("", "0"); # exit; # } # if(!check_from()) # { # # xlog("L_INFO", "Spoofed From-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # sl_send_reply("403", "Spoofed From-URI Detected"); # exit; # } } } if(nat_uac_test("19")) { fix_nated_contact(); setbflag(6); } route(9); } ######################################################################## # Request route 'invite-find-callee' ######################################################################## route[9] { if(alias_db_lookup("dbaliases")) { xlog("L_INFO", "Callee was aliased - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } route(2); if(!is_domain_local("$rd")) { setflag(20); $avp(s:callee_uuid) = "0"; route(11); } avp_delete("$avp(s:callee_uuid)"); avp_db_query("select id from subscriber where username = '$rU'", "$avp(s:callee_uuid)"); if(is_avp_set("$avp(s:callee_uuid)")) { xlog("L_INFO", "Callee is local, uuid='$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(10); } else { $avp(s:callee_uuid) = "0"; xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(11); } exit; } ######################################################################## # Request route 'invite-to-internal' ######################################################################## route[10] { route(4); if(!lookup("location")) { xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Offline"); } else { xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); } exit; } ######################################################################## # Request route 'invite-to-external' ######################################################################## route[11] { if(isflagset(20)) { xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); exit; } route(13); if(!isflagset(23)) { # don't allow calls relaying from PSTN to PSTN, if not explicitely forwarded if(uri =~ "^sip:[0-9]+@") { # only route numeric users to PSTN if(!load_gws()) { xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } if(!next_gw()) { xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("503", "PSTN Termination Currently Unavailable"); exit; } setflag(21); t_on_failure("1"); route(7); } } xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("404", "User Not Found"); exit; } ######################################################################## # Request route 'normalize-e164' ######################################################################## route[12] { # European numbering plans look like this: # CC = country code (i.e. 43 for Austria) # NDC = national destination code (i.e. 1 for Vienna) # SN = subscriber number (i.e. 4001234) # # CC + NDC + SN, i.e. 4314001234 # # Within the same CC+NDC, it can be omitted, so if # +4314001234 wants to call +4315002345, one can dial # just 5002345. # # Within the same CC, CC can be ommitted and a "0" is prefixed # to NDC, so if +4314001234 wants to call +4326003456, # one can dial 026003456. # # For international calls, either "00" or + is prefixed, like # +49123456780 or 0049123456789. # avp_delete("$avp(s:orig_callee_user)/g"); $avp(s:orig_callee_user) = $rU; if(uri =~ "^sip:(\+[1-9])?[0-9]+@") { # looks like a PSTN number if(uri =~ "^sip:0[1-9][0-9]+@") { # we have format 0+NDC+SN strip(1); prefix("+44"); } else if(uri =~ "^sip:00[1-9]+@") { # we have format 00 + CC + NDC + SN strip(2); prefix("+"); } else if(!uri =~ "^sip:\+[1-9][0-9]+@") { # unknown format, maybe NDC wasn't added before? xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(-1); } # else we have "+" + CC + NDC + SN xlog("L_INFO", "Normalized callee '$avp(s:orig_callee_user)' to E.164 format '$rU' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(1); } else { xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); return(-1); } } ######################################################################## # Request route 'lookup-enum' ######################################################################## route[13] { route(12); if($rc == 1) { if(enum_query("e164.org.")) { # TODO: do GW fallback (load gws, set failure-route)? xlog("L_INFO", "ENUM query succeeded - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(7); exit; } else { xlog("L_INFO", "ENUM query failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # ENUM query failed, revert $rU avp_pushto("$ru/username", "$avp(s:orig_callee_user)"); } } } ######################################################################## # Request route 'base-route-local' ######################################################################## route[14] { t_on_reply("1"); if(t_check_trans()) { xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); if(!t_relay()) { sl_reply_error(); } } else { xlog("L_INFO", "Dropping mis-routed request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); } exit; } ######################################################################## # Request route 'base-route-generic' ######################################################################## route[15] { xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("501", "Method Not Supported Here"); exit; } ######################################################################## # Request route 'base-filter-failover' ######################################################################## route[16] { if(!t_check_status("408|500|503")) { xlog("L_INFO", "No failover routing needed for this response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(5); exit; } } ######################################################################### # Presence ######################################################################### route[17] { # if(nat_uac_test("19") || search("^Route:.*;nat=yes")) # { # fix_nated_contact(); # setbflag(6); # } if (!t_newtran()) { sl_reply_error(); exit; }; #if(is_method("PUBLISH")) #{ # xlog("L_INFO", "PUBLISH - Process Publish Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); # handle_publish(); # t_release(); #} if(is_method("PUBLISH")) { if($hdr(Sender)!= NULL) handle_publish("$hdr(Sender)"); else handle_publish(); t_release(); } if(is_method("SUBSCRIBE")) { handle_subscribe(); xlog("L_INFO", "SUBSCRIBE - Process Subscribe Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); t_release(); } exit; } ######################################################################## # SEND MESSAGES ######################################################################## route[18] { if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } if (!t_relay()) { sl_reply_error(); }; exit; } ######################################################################## # Reply route 'base-standard-reply' ######################################################################## onreply_route[1] { xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); exit; } ######################################################################## # Reply route 'base-nat-reply' ######################################################################## onreply_route[2] { xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n"); if(nat_uac_test("1")) { fix_nated_contact(); } if(isbflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if(!search("^Content-Length:[ ]*0")) { use_media_proxy(); } } exit; } ######################################################################## # Failure route 'pstn-failover' ######################################################################## failure_route[1] { xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(16); if(!next_gw()) { xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); route(5); exit; } t_on_failure("1"); route(7); } ######################################################################## # Failure route 'base-standard-failure' ######################################################################## failure_route[2] { route(16); route(5); } _________________________________________________________________ Share what Santa brought you https://www.mycooluncool.com

3 5

[OpenSER-Users] OpenSER + OpenXCAP: NOTIFY response to unsubscription includes xml document?
by KevinKinnan 15 Jan '08

15 Jan '08

Openser: NOTIFY response to unsubscription doesn't have message body. Openser + OpenXCAP: NOTIFY response to unsubscription includes xml document which is the same as one in response to subscription, but the subscription_state in unsub NOTIFY message is "terminated". Can anyone give me a hint? Regards, Kevin _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] OpenSER: no NOTIFY when updating PUBLISH if integrating with OpenXCAP?
by KevinKinnan 15 Jan '08

15 Jan '08

1. Only Openser, no OpenXCAP, force_active=1 NOTIFY with new info is sent from Openser to client when updating PUBLISH message everytime. 2. Openser+OpenXCAP force_active=0 NO NOTIFY is sent from Openser if integrating with OpenXCAP. But PUBLISH message updates properly. I can't figure out why, any clue? Thank you! Kevin, _________________________________________________________________ 天凉了，添衣了，心动了，“七件”了 http://get.live.cn

1 0

Re: [OpenSER-Users] avp_db_query() timeout
by Douglas Garstang 15 Jan '08

15 Jan '08

Inaki, I am doing updates with avp_db_query, so there is no avp I can check the value of . As I said in a subsequent post, I wrote a simple server that listened on port 3306, like mysql does, and pointed OpenSER at it. The avp_db_query commands() basically blocked forever and openser seemed to completely lose all ability to process new calls. That's really bad. Doug. ----- Original Message ---- From: Iñaki Baz Castillo <ibc(a)aliax.net> To: users(a)lists.openser.org Sent: Monday, January 14, 2008 1:46:00 PM Subject: Re: [OpenSER-Users] avp_db_query() timeout El Lunes, 14 de Enero de 2008, Douglas Garstang escribió: > I haven't had much luck getting replies to my questions lately, hopefully > I'll have more luck with this one. > > avp_db_query().... does it have a timeout? What is it? Can I set it? > > If I use it, and there is a MySQL database problem, I don't want > avp_db_query() to wait forever trying to connect to MySQL. If it can't > connect after a few seconds, I'd like it to just give up. I have multiple > calls to avp_db_query() in a typical call flow. It would be even better if > I could set a flag on the first timeout and not try again during that call. > > Can that be done? Hi, by the test I've done: avp_db_query("SQL_QUERY", "$avp(s:result)"); xlog("L_INFO", "retcode = $rc \n"); Cases: - If query doesn't return a row/value then $avp(s:result)=null and $rc=(-1). - If query returns a row/value the $avp(s_result) stores that value and $rc=1. - If there is a syntax error in query then $avp(s:result)=null and $rc=(-1). - If MySQL is not running then $avp(s:result)=null and $rc=(-1). I don't know what occurs if MySQL is running but because overload or any other reason it doesn't reply, but AFAIK the "avp_db_query" uses the same code of other OpenSer functions to access DB, so I'm sure it has a correct behaviour in case of failure. BTW you can "play" with the $rc code after "avp_db_query". -- Iñaki Baz Castillo _______________________________________________ Users mailing list Users(a)lists.openser.org http://lists.openser.org/cgi-bin/mailman/listinfo/users ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

3 4

[OpenSER-Users] CPL and $var issue when different process
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hi, maybe someone could confirm this: At the begining of my script I set a variable: $var(gateway) = "123.123.123.123"; Later, I run CPL for calls to internal users and there could be forwardings and so. I set CPL "recurse" parameter so convert 302 from UAS into a new branch into CPL. At the end of CPL I run "route[20]" in which I use the variable $var(gateway), but sometimes it appears empty. I think this could occur because CPL can involve various OpenSer process. I think that when CPL receives a 302, maybe sometimes it's a new OpenSer process and since it's a reply the variable at the begining of my script is not read, so it appears empty. Am I right? A solution is to use AVP instead od variables since AVP's remains along al lthe transaction. Am I right? Thanks for any confirmation. Best regards. -- Iñaki Baz Castillo

4 5

[OpenSER-Users] ¿Se puede enviar DTMF durante el Early Media?
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hola, algo que fastidia a todo el mundo es el tema de que te cobren una llamada nada más salir el buzón de voz. Lo lógico y deseable (al margen de la actitud avariciosa de las grandes operadoras) es que al llamar a un número y salir el buzón de voz no se cobre la llamada y se ofrezca la posibilidad de dejar un mensaje pulsando algún dígito. El impedimento técnico que veo es que parece ser no se permite el envío de DTMF durante el EarlyMedia. Pero no encuentro documentación sobre ello. El caso es que durante el EarlyMedia el audio es bidireccional, o sea, el SDP del "183 Session Progress" dice: a=sendrecv (de hecho esto lo he verificado también a nivel de gateway PSTN: una llamada desde la PSTN a un gateway y éste la dirige a un SIP UAS que responde con 183, y el gateway envía y recibe audio desde el UAS). A todo esto una duda que tengo es precisamente esto de poder enviar y recibir audio durante un EarlyMedia, ¿se puede o no se puede? ¿se hace? Por otra parte, mi Twinkle no me permite enviar DTMF durante el EarlyMedia, pero vamos, que ni lo intenta por lo que no sé qué pasaría si sí me dejase. Y por las pruebas que he hecho llamando desde la PSTN (fijo y móvil) y respondiendo con un EarlyMedia, tampoco parece que se permita el envío de DTMF. En fin, que la única opción honesta que he encontrado es la de reproducir el mensaje del buzón en EarlyMedia, y sólo tras el mensaje responder la llamada para que el llamante deje su mensaje (y sólo en ese caso provocar que tenga que pagar su llamada). Con lo fácil que es... lo cab***as que son las compañías. Bueno, sin más, que no sé exactamente cuál es mi pregunta pero tal vez alguien me ayude a definirla XD Saludos. -- Iñaki Baz Castillo

4 6

[OpenSER-Users] Giving more power to CPL language: Addressbook Categories feature
by Iñaki Baz Castillo 15 Jan '08

15 Jan '08

Hi, in my opinion CPL language is not enough powerful, the absence of regular expression or any header reading makes it poor (IMHO). It would become really cool if it could match AVP's but it can :( I'm trying to give some power to CPL logic. I want to implement "addressbook categories" for each user, this is: each user has its own addressbook in which he can set a category for each contact: - Work - Friend - Family - Custom And of course what I need it a way to match that category **inside** the CPL logic. This is impossible with CPL itself so I'm thinking in a very very dirty trick: ** Addressbook Categories ** - In an incoming call for "bob(a)domain.org" OpenSer will match the callerid against Bob's addressbook. This will return a variable or AVP: $avp(s:caller_category) - CPL module just can match "Organization", "Subject", and "User-Agent", so OpenSer will do: append_hf("Bak_Organization: $hdr(Organization)\r\n"); # To preserve original Organization remove_hf("Organization"); # Remove original Organization append_hf("Organization: $avp(s:caller_category)\r\n"); # Set category as Organization - But since OpenSer appends/removes headers when the message leaves the proxy I can't run CPL now (it will not read the new "Organization" header), so I need to do a dirty loop in order to append the header. - When the message comes back into OpenSer the headers are updated so I do: remove_hf("Organization"); # Remove current Organization (that is a hack) append_hf("Organization: $hdr(Backup_Organization)\r\n"); # Restore original Organization (those changes will be applied again when message leaves OpenSer, not now). - And I run CPL: cpl_run_script("incoming","FORCE_STATEFUL"); - Into CPL I match "Organization" header by: <string-switch field="Organization"> <string is="Friends"> <reject status="reject" reason="I have no friends" /> </string> </string-switch> Is it enough dirty or could I make it more? Any suggestion? how do you people implement things like this? Thank a lot. -- Iñaki Baz Castillo ibc(a)in.ilimit.es

2 1

[OpenSER-Users] OpenSER logo
by Reinhold Buchinger 15 Jan '08

15 Jan '08

Hi, Where can I find the OpenSER logo in a high resolution? Thanks for your help. Regards, Reinhold

3 2

[OpenSER-Users] CRL/OCSP in OpenSer
by Jan Ruzicka 15 Jan '08

15 Jan '08

Hi, is it possible to use CRL (OCSP)? I found an old message from Klaus (http://www.nabble.com/-Users--CRL-in-OpenSER-to12712663.html#a12712666). As far I don't see mentioned new cfg parameter, I'm afraid its not possible. Are there any plan to use these features? Thanks Jan

2 1

[OpenSER-Users] OpenSER Configuration via files?
by Douglas Garstang 15 Jan '08

15 Jan '08

Asked this question earlier in the week, and didn't get an answer. I'm using avp_db_query to log calls to MySQL. I'd like to be able to turn this and other functionality on and off in the openser.cfg file without having to comment lines. Obviously putting the settings into MySQL and reading them with avp_db_query() doesn't make much sense. Does OpenSER have some sort of simple key/value pair configuration it read from a file so that I can control the basic configuration with? The db_text and db_berkeley modules are unfortunately only designed to be used for userloc data. Why is that? Thanks, Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

2 1

[OpenSER-Users] OpenXCAP: sphere and validity?
by KevinKinnan 15 Jan '08

15 Jan '08

I can't make it work when testing the effect of validity element in conditions element in Openser+OpenXCAP, also happen on sphere element and transformations. The presence document is based on rpid and it is quite simple. The only one I got it work is like below(without validity and sphere elements): <condition> <one id=""> </condition> <actions> <sub-handling>allow</sub-handling> </actions> The following two(adding validity and sphere) are not working: <condition> <one id=""> <validity> <from>...</from> <until>...</until> </validity> </condition> <actions> <sub-handling>allow</sub-handling> </actions> <condition> <shpere value="home"> <one id=""> </condition> <actions> <sub-handling>allow</sub-handling> </actions> Does OpenXCAP support these policies metioned above? Or, Openser is not supporting sphere and validity auth, it only knows sub-handling(xcap_auth.c in openser/modules/presence_xml)? Thank you! Kevin, _________________________________________________________________ Windows Live Photo gallery 数码相机的超级伴侣，轻松管理和编辑照片，还能制作全景美图！ http://get.live.cn/product/photo.html

1 0

[OpenSER-Users] avp_db_query() timeout
by Douglas Garstang 14 Jan '08

14 Jan '08

I haven't had much luck getting replies to my questions lately, hopefully I'll have more luck with this one. avp_db_query().... does it have a timeout? What is it? Can I set it? If I use it, and there is a MySQL database problem, I don't want avp_db_query() to wait forever trying to connect to MySQL. If it can't connect after a few seconds, I'd like it to just give up. I have multiple calls to avp_db_query() in a typical call flow. It would be even better if I could set a flag on the first timeout and not try again during that call. Can that be done? Doug. ____________________________________________________________________________________ Never miss a thing. Make Yahoo your home page. http://www.yahoo.com/r/hs

2 1

[Serusers] xml rpc documentation
by Srinivas Kotamarti 14 Jan '08

14 Jan '08

Hi, Does anybody know where can I find more documentation on the new XML-RPC module of SER2. I want to write a management plugin for the application I am writing on top of SEMS using the XML-RPC interface. The documentation in the SER2.0 documentation page (http://www.iptel.org/rpc_xml_rpc) does not explain its full functionality and is not enough for writing a plugin. Thanks --Srinivas

2 1

[OpenSER-Users] strange error logs in syslog
by Cseke Tamas 14 Jan '08

14 Jan '08

Hello, We have a lots of error log like this, what fills syslog ERROR:tm:t_forward_nonack: discarding fwd for a cancelled transaction ERROR:tm:w_t_relay: t_forward_nonack failed ERROR: t_check_status: cannot check status for a reply which has no T-state established Could you tell me how could i avoid this? I think these are not errors. Shall i just change the debug level for this logs? Thanks any help, Tamas

2 2

[OpenSER-Users] radius_does_uri_exist
by Marc LEURENT 14 Jan '08

14 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good afternoon, I'm trying to use the radius_does_uri_exist() function to check if the user exist before forwarding it to voicemail when it's not enable. I'm using radius AAA and the radius_does_uri_exist() seems to fail.. Any idea how to solve it? Thanks # -- uri_radius paramaters -- modparam("uri_radius", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") modparam("uri_radius", "service_type", 11) # Radius service type used in radius_does_uri_exist check. ....... if (!lookup("location")) { if (radius_does_uri_exist()) { # Will Redirect to voicemail when fixed sl_send_reply("480", "Temporarily Unaivailable - Will Redirect To Voicemail"); exit; }; xlog("L_DBG", "ACC RADIUS: 404 NOT FOUND FOR $si \r\n"); sl_send_reply("404", "Not Found"); exit; ..... When I'm trying to call aeron which is not connected but exists, I have a 404 not found whereas I should have a 480... root@krusty:[~L/freeradius]# tail -f radius.log Mon Jan 14 16:08:18 2008 : Auth: Login incorrect: [aeron(a)sip.bob.net/<no User-Password attribute>] (from client private port 0) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHi311N4+o+2LtdFwRAgGNAKC4xB0R5mHjgZ0zNKCaEEcqCgCUaQCdG+p0 4KoP/SuAUHJ8u6GFnaOTLYw= =OXcY -----END PGP SIGNATURE-----

1 1

[OpenSER-Users] OpenXCAP problem
by Franz Edler 14 Jan '08

14 Jan '08

Hi OpenXCAP experts, I am trying to setup a demo-configuration for XCAP with Eyebeam- and Bria-client. OpenXCAP and OpenSER are running. When I start-up the Bria-client (data storage via XCAP enabled) I get the following errors from OpenXCAP - log (e.g. for resource-list): Jan 2 13:15:38 sip openxcap[10367]: [HTTPChannel,2,192.168.0.2] error: Invalid Document Selector xcap-root/resource-lists/users//resource-list.xml (the Document Selector context must be 'users' or 'global': 'resource-lists') Jan 2 13:15:38 sip openxcap[10367]: [-] error: Invalid Document Selector xcap-root/resource-lists/users//resource-list.xml (the Document Selector context must be 'users' or 'global': 'resource-lists') The HTTP dialog between the client and the XCAP server is the following: GET /xcap-root/resource-lists/users//resource-list.xml HTTP/1.1 Host: xcap.net1.test:8000 Keep-Alive: Connection: TE, Keep-Alive TE: trailers HTTP/1.1 404 Not Found Date: Wed, 02 Jan 2008 12:15:38 GMT Content-Length: 75 Server: OpenXCAP/0.9.7 the Document Selector context must be 'users' or 'global': 'resource-lists' PUT /xcap-root/resource-lists/users//resource-list.xml HTTP/1.1 Host: xcap.net1.test:8000 Connection: TE TE: trailers Content-Type: application/resource-lists+xml Content-Length: 323 <?xml version="1.0" encoding="UTF-8"?> <resource-lists xmlns="urn:ietf:params:xml:ns:resource-lists" xmlns:cp="counterpath:properties"> <list name="Contact List"> <cp:prop name="category" value="Friends" /> <cp:prop name="category#2" value="Home" /> <cp:prop name="category#3" value="Work" /> </list></resource-lists> HTTP/1.1 404 Not Found Date: Wed, 02 Jan 2008 12:15:38 GMT Content-Length: 75 Server: OpenXCAP/0.9.7 the Document Selector context must be 'users' or 'global': 'resource-lists' Any hint highly appreciated! Franz

2 2

[Serusers] Registration expires timer
by Ranganath B 14 Jan '08

14 Jan '08

Hi, Need help in setting the registration expiry timer at SER. I would like to know the way we can enforce the registration expiry timer from server end. Please update me on the configuration details. Thanks in advance, Ranganath B

2 2

Re: [OpenSER-Users] TLS problem.
by Klaus Darilion 14 Jan '08

14 Jan '08

Hi Fengbin! Cc'ed to the openser list ... fengbin schrieb: > Hi,Klaus, > > How to use NULL cipher? Only setting in Openser is ok? I mean do I need > to set NULL cipher at client site? Usually the NULL cipher is not enabled (for security reasons). You have to enable it on both sides, the server and the client. But if you use the following approach you do not need it. > And where to put xlog("L_ERR","message buffer: $mb"); anywhere in > openser.cfg ? Put it just in the beginning of the route block. regards klaus > THX > BR > > > On 1/11/08, *Klaus Darilion* <klaus.mailinglists(a)pernau.at > <mailto:klaus.mailinglists@pernau.at>> wrote: > > The capture file is not helpful, as it is encrypted. You could use NULL > cipher to have plaintext inside the TLS connection to inspect the > incoming SIP message, or add xlog("L_ERR","message buffer: $mb"); to see > the whole incoming SIP request. > > regards > klaus > > fengbin schrieb: > > Hi,Klaus > > Thank you for your reply. > > The enclosed is the config file ,the pcap between client and > server and > > the log on the openser 's console. > > Could you please take a look at them for me? > > > > THX > > BR > > > > > > On 1/10/08, *Klaus Darilion* <klaus.mailinglists(a)pernau.at > <mailto:klaus.mailinglists@pernau.at> > > <mailto:klaus.mailinglists@pernau.at > <mailto:klaus.mailinglists@pernau.at> >> wrote: > > > > Can you show us the REGISTER request? (both, port 5060 and > port 5061). > > > > Further show use your openser config > > > > regards > > klaus > > > > fengbin schrieb: > > > > > > Hi,all > > > I met a strange problem while I am testing TLS connection > between > > > minisip and openser. > > > The following is my openser.cfg (part of that) > > > > > > ......... > > > fork=no > > > log_stderror=yes > > > > > > # Uncomment this to prevent the blacklisting of > temporary not > > > available destinations > > > #disable_dns_blacklist=yes > > > > > > # # Uncomment this to prevent the IPv6 lookup after v4 > dns lookup > > > failures > > > #dns_try_ipv6=no > > > > > > # uncomment the following lines for TLS support > > > disable_tls = 0 > > > listen = tls: 10.11.57.197:5060 > <http://10.11.57.197:5060> <http://10.11.57.197:5060> > > <http://10.11.57.197:5060> > > > > > > > > > tls_verify_client = 1 > > > tls_method = TLSv1 > > > tls_certificate = "/usr/local/etc/openser//tls/user/user- > > cert.pem" > > > tls_private_key = > > "/usr/local/etc/openser//tls/user/user- privkey.pem" > > > tls_ca_list = "/usr/local/etc/openser//tls/user/user- > calist.pem" > > > tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" > > > ...... > > > > > > When I set "tls:10.11.57.197:5061 > <http://10.11.57.197:5061> <http://10.11.57.197:5061> < > > http://10.11.57.197:5061>" the > > > registration never succeed. But if I set it to 5060 the > registration > > > over TLS is OK. > > > I compared the log of two scenarioes and found the TLS > session > > both are > > > OK,but the difference is that: > > > when the port is 5061 there is an error of forwarding. but the > > > forwarding is because openser think it's not the > destination of > > > the registration request. See bellow: > > > > > > Jan 10 16:46:56 [9199] DBG:rr:after_loose: No next URI > found > > > Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [ 10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197 <http://10.11.57.197>>] == > > > [10.11.57.197 <http://10.11.57.197> > <http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: > checking if port > > > 5061 matches port 5060 > > > Jan 10 16:46:56 [9199] DBG:core:check_self: host != me > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 16:46:56 [9199] DBG:tm:t_newtran: T on > > entrance=0xffffffff > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=78 > > > Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: start > searching: > > > hash=58073, isACK=0 > > > Jan 10 16:46:56 [9199] DBG:tm:matching_3261: RFC3261 > transaction > > > matching failed > > > Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: no > > transaction found > > > Jan 10 16:46:56 [9199] DBG:core:mk_proxy: doing DNS > lookup... > > > Jan 10 16:46:56 [9199] ERROR:tm:update_uac_dst: failed > to fwd > > to af > > > 2, proto 1 (no corresponding listening socket) > > > Jan 10 16:46:56 [9199] ERROR:tm:t_forward_nonack: > failure to add > > > branches > > > > > > > > > > > > With comparition to that when the port is set to 5060 the > trace is : > > > > > > Jan 10 17:07:59 [9410] DBG:rr:find_next_route: No next > Route > > HF found > > > Jan 10 17:07:59 [9410] DBG:rr:after_loose: No next URI > found > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [ 10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197>] == > > > [ 10.11.57.197 <http://10.11.57.197> > <http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if port > > > 5060 matches port 5060 > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if > > > host==us: 12==12 && [10.11.57.197 > <http://10.11.57.197> <http://10.11.57.197> > > <http://10.11.57.197>] == > > > [10.11.57.197 <http://10.11.57.197> < > http://10.11.57.197> <http://10.11.57.197>] > > > Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: > checking if port > > > 5060 matches port 5060 > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > flags=8000000 > > > Jan 10 17:07:59 [9410] DBG:core:parse_headers: > > flags=ffffffffffffffff > > > Jan 10 17:07:59 [9410] DBG:registrar:build_contact: > created > > Contact > > > HF: Contact: > > <sip:888@10.11.57.192:5061;transport=TLS>;expires=1000 > > > > > > > > > > > > And there is no fwd needed then.So the error didnt occur. > > > > > > Its a little bit strange that when I set the port to > 5061,why did > > > openser check the port 5060????? > > > Can anyone help me to figure it out? > > > THX > > > BR > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Fengbin > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > Users mailing list > > > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > <mailto:Users@lists.openser.org <mailto:Users@lists.openser.org>> > > > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > > > > > > > -- > > Fengbin > > > > > > > -- > Fengbin

2 5

[OpenSER-Users] OpenSER 1.3 Presence Server
by Ross Beer 13 Jan '08

13 Jan '08

Hi All, I am trying to setup an OpenSER server with support for registration, messaging & presence however I am having a problem with the presence server. I have had presence working correctly before, however for some reason it is no longer working. I have spent about two days trying everything! I would really appreciate some advice with this. I have included my config below. Thank you in advance, Ross ------------------------------------------------------------------------------listen = udp:my.ip.address:5060mpath = "/usr/local/lib64/openser/modules"children = 8debug = 3fork = yesdisable_tcp = no#log_facility = LOG_DAEMONlog_facility = LOG_LOCAL0log_stderror = yestcp_children = 4mhomed = noserver_signature = yes#sock_group = "openser"#sock_mode = 0600#sock_user = "openser"#unix_sock = "/tmp/openser.sock"#unix_sock_children = 1#reply_to_via = no#sip_warning = no#check_via = no#dns = no#rev_dns = no#disable_core_dump = no#dns_try_ipv6 = yes#dns_use_search_list = yesloadmodule "usrloc.so"modparam("usrloc", "user_column", "username")modparam("usrloc", "domain_column", "domain")modparam("usrloc", "contact_column", "contact")modparam("usrloc", "expires_column", "expires")modparam("usrloc", "q_column", "q")modparam("usrloc", "callid_column", "callid")modparam("usrloc", "cseq_column", "cseq")modparam("usrloc", "methods_column", "methods")modparam("usrloc", "flags_column", "flags")modparam("usrloc", "user_agent_column", "user_agent")modparam("usrloc", "received_column", "received")modparam("usrloc", "socket_column", "socket")modparam("usrloc", "use_domain", 0)modparam("usrloc", "desc_time_order", 0)modparam("usrloc", "timer_interval", 60)modparam("usrloc", "db_url", "mysql://username:password@localhost/openser")modparam("usrloc", "db_mode", 1)modparam("usrloc", "matching_mode", 0)modparam("usrloc", "cseq_delay", 20)modparam("usrloc", "nat_bflag", 6)loadmodule "registrar.so"modparam("registrar", "default_expires", 3600)modparam("registrar", "min_expires", 60)modparam("registrar", "max_expires", 0)modparam("registrar", "default_q", 0)modparam("registrar", "append_branches", 1)modparam("registrar", "case_sensitive", 0)modparam("registrar", "received_param", "received")modparam("registrar", "max_contacts", 0)modparam("registrar", "retry_after", 0)modparam("registrar", "method_filtering", 0)modparam("registrar", "path_mode", 2)modparam("registrar", "path_use_received", 0)modparam("registrar", "received_avp", "$avp(i:801)")loadmodule "rr.so"modparam("rr", "enable_full_lr", 1)modparam("rr", "append_fromtag", 1)modparam("rr", "enable_double_rr", 1)modparam("rr", "add_username", 0)loadmodule "tm.so"modparam("tm", "fr_timer", 30)modparam("tm", "fr_inv_timer", 120)modparam("tm", "wt_timer", 5)modparam("tm", "delete_timer", 2)modparam("tm", "noisy_ctimer", 0)modparam("tm", "ruri_matching", 1)modparam("tm", "via1_matching", 1)modparam("tm", "unix_tx_timeout", 2)modparam("tm", "restart_fr_on_each_reply", 1)modparam("tm", "pass_provisional_replies", 0) loadmodule "xlog.so"modparam("xlog", "buf_size", 4096)modparam("xlog", "force_color", 1)loadmodule "mi_fifo.so"modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")#modparam("mi_fif0", "fifo_name", "FIFO")modparam("mi_fifo", "fifo_mode", 0660)#modparam("mi_fifo", "fifo_group", "openser")#modparam("mi_fifo", "fifo_user", "openser")modparam("mi_fifo", "reply_dir", "/tmp/")modparam("mi_fifo", "reply_indent", "\t")loadmodule "domain.so"modparam("domain", "db_url", "mysql://username:password@localhost/openser")modparam("domain", "db_mode", 1)modparam("domain", "domain_table", "domain")modparam("domain", "domain_col", "domain")loadmodule "nathelper.so"modparam("nathelper", "natping_interval", 0)modparam("nathelper", "ping_nated_only", 1)modparam("nathelper", "rtpproxy_sock", "")modparam("nathelper", "rtpproxy_disable_tout", 60)modparam("nathelper", "rtpproxy_tout", 1)modparam("nathelper", "rtpproxy_retr", 5)modparam("nathelper", "sipping_method", "OPTIONS")modparam("nathelper", "received_avp", "$avp(i:801)")loadmodule "textops.so"loadmodule "mediaproxy.so"#modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock")modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock")modparam("mediaproxy", "sip_asymmetrics", "/etc/openser/sip-asymmetric-clients")modparam("mediaproxy", "rtp_asymmetrics", "/etc/openser/rtp-asymmetric-clients")modparam("mediaproxy", "natping_interval", 60)loadmodule "uri.so"loadmodule "sl.so"modparam("sl", "enable_stats", 1)loadmodule "maxfwd.so"modparam("maxfwd", "max_limit", 256)loadmodule "mysql.so"modparam("mysql", "ping_interval", 300)modparam("mysql", "auto_reconnect", 1)loadmodule "auth.so"modparam("auth", "nonce_expire", 300)modparam("auth", "rpid_suffix", ";party=calling;id-type=subscriber;screen=yes")modparam("auth", "rpid_avp", "$avp(s:rpid)")loadmodule "auth_db.so"modparam("auth_db", "db_url", "mysql://username:password@localhost/openser")modparam("auth_db", "user_column", "username")modparam("auth_db", "domain_column", "domain")modparam("auth_db", "password_column", "password")#modparam("auth_db", "password_column_2", "ha1b")modparam("auth_db", "calculate_ha1", 1)modparam("auth_db", "use_domain", 0)modparam("auth_db", "load_credentials", "$avp(s:caller_uuid)=id")loadmodule "uri_db.so"modparam("uri_db", "db_url", "mysql://username:password@localhost/openser")modparam("uri_db", "uri_table", "uri")modparam("uri_db", "uri_user_column", "username")modparam("uri_db", "uri_domain_column", "domain")modparam("uri_db", "uri_uriuser_column", "uri_user")modparam("uri_db", "subscriber_table", "subscriber")modparam("uri_db", "subscriber_user_column", "username")modparam("uri_db", "subscriber_domain_column", "domain")modparam("uri_db", "use_uri_table", 0)modparam("uri_db", "use_domain", 0)loadmodule "avpops.so"modparam("avpops", "db_url", "mysql://username:password@localhost/openser")modparam("avpops", "avp_table", "usr_preferences")modparam("avpops", "use_domain", 0)modparam("avpops", "uuid_column", "id")modparam("avpops", "username_column", "username")modparam("avpops", "domain_column", "domain")modparam("avpops", "attribute_column", "attribute")modparam("avpops", "value_column", "value")modparam("avpops", "type_column", "type")loadmodule "enum.so"modparam("enum", "domain_suffix", "e164.org.")loadmodule "permissions.so"#modparam("permissions", "default_allow_file", "permissions.allow")#modparam("permissions", "default_deny_file", "permissions.deny")#modparam("permissions", "check_all_branches", 1)#modparam("permissions", "allow_suffix", ".allow")#modparam("permissions", "deny_suffix", ".deny")modparam("permissions", "db_url", "mysql://username:password@localhost/openser")modparam("permissions", "db_mode", 1)modparam("permissions", "trusted_table", "trusted")modparam("permissions", "source_col", "src_ip")modparam("permissions", "proto_col", "proto")modparam("permissions", "from_col", "from_pattern")modparam("permissions", "tag_col", "tag")modparam("permissions", "peer_tag_avp", "$avp(i:707)")loadmodule "lcr.so"modparam("lcr", "db_url", "mysql://username:password@localhost/openser")modparam("lcr", "gw_table", "gw")modparam("lcr", "gw_name_column", "gw_name")modparam("lcr", "ip_addr_column", "ip_addr")modparam("lcr", "port_column", "port")modparam("lcr", "uri_scheme_column", "uri_scheme")modparam("lcr", "transport_column", "transport")modparam("lcr", "grp_id_column", "grp_id")modparam("lcr", "lcr_table", "lcr")modparam("lcr", "strip_column", "strip")modparam("lcr", "prefix_column", "prefix")modparam("lcr", "from_uri_column", "from_uri")modparam("lcr", "priority_column", "priority")modparam("lcr", "gw_uri_avp", "$avp(i:709)")modparam("lcr", "ruri_user_avp", "$avp(i:500)")modparam("lcr", "contact_avp", "$avp(i:711)")modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)")modparam("lcr", "fr_inv_timer", 90)modparam("lcr", "fr_inv_timer_next", 30)modparam("lcr", "rpid_avp", "$avp(i:302)")modparam("lcr", "dm_flag", 25) loadmodule "alias_db.so"modparam("alias_db", "db_url", "mysql://username:password@localhost/openser")modparam("alias_db", "user_column", "username")modparam("alias_db", "domain_column", "domain")modparam("alias_db", "alias_user_column", "alias_username")modparam("alias_db", "alias_domain_column", "alias_domain")modparam("alias_db", "use_domain", 0) # ----- presence params -----loadmodule "presence.so"loadmodule "presence_xml.so"loadmodule "presence_mwi.so"loadmodule "pua.so"loadmodule "pua_mi.so"loadmodule "pua_usrloc.so"modparam("presence|presence_xml", "db_url","mysql://username:password@localhost/openser")modparam("presence_xml", "force_active", 1)modparam("presence", "server_address", "sip:my.ip.address:5060")modparam("presence", "presentity_table", "presentity")modparam("presence", "active_watchers_table", "active_watchers")modparam("presence", "watchers_table", "watchers")modparam("presence", "clean_period", 100)modparam("presence", "max_expires", 3600)modparam("presence", "fallback2db", 1)modparam("presence_xml", "xcap_table", "xcap")modparam("presence_xml", "pidf_manipulation", 1)modparam("presence_xml", "integrated_xcap_server", 1)modparam("pua_usrloc", "default_domain", "my.domain.com")modparam("presence", "to_tag_pref", 'pres') ######################################################################### Request route 'main'########################################################################route[0]{xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");force_rport();if(msg:len > max_len){xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("513", "Message Too Big");exit;}if (!mf_process_maxfwd_header("10")){xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("483", "Too Many Hops");exit;}if(!is_method("REGISTER|MESSAGE")){if(nat_uac_test("19")){record_route(";nat=yes");}else{record_route();}}if(is_method("CANCEL") || is_method("BYE")){end_media_session();}if(loose_route()){if(!has_totag()){xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Initial Loose-Routing Rejected");exit;}if(nat_uac_test("19") || search("^Route:.*;nat=yes")){fix_nated_contact();setbflag(6);}route(7);}if(is_method("REGISTER")){route(6);}if(is_method("INVITE")){route(8);}if(is_method("PUBLISH|SUBSCRIBE")){route(17);}if(is_method("CANCEL") || is_method("ACK")){route(14);}############################# MESSAGES #############################if(is_method("MESSAGE")){route(18);}route(15);}######################################################################### Request route 'clear-usr-preferences-caller'########################################################################route[1]{xlog("L_INFO", "Clear caller preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}######################################################################### Request route 'clear-usr-preferences-callee'########################################################################route[2]{xlog("L_INFO", "Clear callee preferences - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}######################################################################### Request route 'usr-preferences-caller'########################################################################route[3]{route(1);xlog("L_INFO", "Load caller preferences for uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# load caller avpsavp_db_load("$avp(s:caller_uuid)", "*");}######################################################################### Request route 'usr-preferences-callee'########################################################################route[4]{xlog("L_INFO", "Load callee preferences for uuid '$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# load callee avpsavp_db_load("$avp(s:callee_uuid)", "*");}######################################################################### Request route 'stop-media-proxy'########################################################################route[5]{if(isflagset(22)){end_media_session();}}######################################################################### Request route 'base-route-register'########################################################################route[6]{sl_send_reply("100", "Trying");if(!www_authorize("", "subscriber")) {xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");www_challenge("", "0");exit;}if(!check_to()) {xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Spoofed To-URI Detected");exit;}consume_credentials();if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) {fix_nated_register();setbflag(6);}if(!save("location")) {xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_reply_error();exit;}xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");exit;}######################################################################### Request route 'base-outbound'########################################################################route[7]{xlog("L_INFO", "ROUTE 7 RUN - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(isbflagset(6)){if(!isflagset(22) && !search("^Content-Length:[ ]*0")){setflag(22);use_media_proxy();}t_on_reply("2");}else{t_on_reply("1");}if(!isflagset(21)){t_on_failure("2");}if(isflagset(29)){append_branch();}if(is_present_hf("Proxy-Authorization")){consume_credentials();}xlog("L_INFO", "Request leaving server, D-URI='$du' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# no 100 (we already sent it) and no DNS blacklistingif(!t_relay("0x05")){sl_reply_error();if(is_method("INVITE") && isbflagset(6)){end_media_session();}}exit;}######################################################################### Request route 'base-route-invite'########################################################################route[8]{sl_send_reply("100", "Trying");if(from_gw()){$avp(s:caller_uuid) = "0";xlog("L_INFO", "Call from PSTN' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");setflag(23);}else{if(allow_trusted()){if(is_avp_set("$avp(s:peer_uuid)/s")){# use tag-column from trusted-table as uuid for this calleravp_copy("$avp(s:peer_uuid)", "$avp(s:caller_uuid)/d");}else{# if no uuid is set, use "0" as default uuid$avp(s:caller_uuid) = "0";}xlog("L_INFO", "Call from trusted peer with uuid '$avp(s:caller_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(!is_domain_local("$rd")){xlog("L_INFO", "Rejecting peering attempt with non-local request domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("403", "Relaying Denied");exit;}setflag(23);}else{# if(!proxy_authorize("", "subscriber")) # {# # xlog("L_INFO", "Proxy authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# proxy_challenge("", "0");# exit;# }# if(!check_from()) # {# # xlog("L_INFO", "Spoofed From-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# sl_send_reply("403", "Spoofed From-URI Detected");# exit;# }}}if(nat_uac_test("19")) {fix_nated_contact();setbflag(6);}route(9);}######################################################################### Request route 'invite-find-callee'########################################################################route[9]{if(alias_db_lookup("dbaliases")){xlog("L_INFO", "Callee was aliased - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}route(2);if(!is_domain_local("$rd")){setflag(20);$avp(s:callee_uuid) = "0";route(11);}avp_delete("$avp(s:callee_uuid)");avp_db_query("select id from subscriber where username = '$rU'", "$avp(s:callee_uuid)");if(is_avp_set("$avp(s:callee_uuid)")){xlog("L_INFO", "Callee is local, uuid='$avp(s:callee_uuid)' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(10);}else{$avp(s:callee_uuid) = "0";xlog("L_INFO", "Callee is not local - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(11);}exit;}######################################################################### Request route 'invite-to-internal'########################################################################route[10]{route(4);if(!lookup("location")) {xlog("L_INFO", "Local user offline - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("404", "User Offline");}else{xlog("L_INFO", "Local user online - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);}exit;}######################################################################### Request route 'invite-to-external'########################################################################route[11]{if(isflagset(20)){xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);exit;}route(13);if(!isflagset(23)){# don't allow calls relaying from PSTN to PSTN, if not explicitely forwardedif(uri =~ "^sip:[0-9]+@"){# only route numeric users to PSTNif(!load_gws()){xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("503", "PSTN Termination Currently Unavailable");exit;}if(!next_gw()){xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("503", "PSTN Termination Currently Unavailable");exit;}setflag(21);t_on_failure("1");route(7);}}xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("404", "User Not Found");exit;}######################################################################### Request route 'normalize-e164'########################################################################route[12]{# European numbering plans look like this:# CC = country code (i.e. 43 for Austria)# NDC = national destination code (i.e. 1 for Vienna)# SN = subscriber number (i.e. 4001234)# # CC + NDC + SN, i.e. 4314001234## Within the same CC+NDC, it can be omitted, so if# +4314001234 wants to call +4315002345, one can dial# just 5002345.## Within the same CC, CC can be ommitted and a "0" is prefixed# to NDC, so if +4314001234 wants to call +4326003456, # one can dial 026003456.## For international calls, either "00" or + is prefixed, like# +49123456780 or 0049123456789.#avp_delete("$avp(s:orig_callee_user)/g");$avp(s:orig_callee_user) = $rU;if(uri =~ "^sip:(\+[1-9])?[0-9]+@"){# looks like a PSTN numberif(uri =~ "^sip:0[1-9][0-9]+@"){# we have format 0+NDC+SNstrip(1);prefix("+44");}else if(uri =~ "^sip:00[1-9]+@"){# we have format 00 + CC + NDC + SNstrip(2);prefix("+");}else if(!uri =~ "^sip:\+[1-9][0-9]+@"){# unknown format, maybe NDC wasn't added before?xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(-1);}# else we have "+" + CC + NDC + SNxlog("L_INFO", "Normalized callee '$avp(s:orig_callee_user)' to E.164 format '$rU' - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(1);}else{xlog("L_INFO", "Not normalized callee '$avp(s:orig_callee_user)' to E.164 format - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");return(-1);}}######################################################################### Request route 'lookup-enum'########################################################################route[13]{route(12);if($rc == 1){if(enum_query("e164.org.")){# TODO: do GW fallback (load gws, set failure-route)?xlog("L_INFO", "ENUM query succeeded - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(7);exit;}else{xlog("L_INFO", "ENUM query failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# ENUM query failed, revert $rUavp_pushto("$ru/username", "$avp(s:orig_callee_user)");}}}######################################################################### Request route 'base-route-local'########################################################################route[14]{t_on_reply("1");if(t_check_trans()){xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");if(!t_relay()){sl_reply_error();}}else{xlog("L_INFO", "Dropping mis-routed request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");}exit;}######################################################################### Request route 'base-route-generic'########################################################################route[15]{xlog("L_INFO", "Method not supported - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");sl_send_reply("501", "Method Not Supported Here");exit;}######################################################################### Request route 'base-filter-failover'########################################################################route[16]{if(!t_check_status("408|500|503")){xlog("L_INFO", "No failover routing needed for this response code - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(5);exit;}}########################################################################## Presence#########################################################################route[17]{# if(nat_uac_test("19") || search("^Route:.*;nat=yes"))# {# fix_nated_contact();# setbflag(6);# } if (!t_newtran()){sl_reply_error();exit;};#if(is_method("PUBLISH"))#{# xlog("L_INFO", "PUBLISH - Process Publish Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");# handle_publish();# t_release();#}if(is_method("PUBLISH")){if($hdr(Sender)!= NULL)handle_publish("$hdr(Sender)");elsehandle_publish();t_release();}if(is_method("SUBSCRIBE")){handle_subscribe();xlog("L_INFO", "SUBSCRIBE - Process Subscribe Request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");t_release();}exit;}######################################################################### SEND MESSAGES########################################################################route[18]{if (!lookup("location")) {switch ($retcode) {case -1:case -3:t_newtran();t_reply("404", "Not Found");exit;case -2:sl_send_reply("405", "Method Not Allowed");exit;}}if (!t_relay()) {sl_reply_error();};exit;}######################################################################### Reply route 'base-standard-reply'########################################################################onreply_route[1]{xlog("L_INFO", "Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n");exit;}######################################################################### Reply route 'base-nat-reply'########################################################################onreply_route[2]{xlog("L_INFO", "NAT-Reply - S=$rs D=$rr F=$fu T=$tu IP=$si ID=$ci\n");if(nat_uac_test("1")){fix_nated_contact();}if(isbflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") {if(!search("^Content-Length:[ ]*0")){use_media_proxy();}}exit;}######################################################################### Failure route 'pstn-failover'########################################################################failure_route[1]{xlog("L_INFO", "Failure route for PSTN entered - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(16);if(!next_gw()){xlog("L_ERR", "Failed to select next PSTN gateway - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");route(5);exit;}t_on_failure("1");route(7);}######################################################################### Failure route 'base-standard-failure'########################################################################failure_route[2]{route(16);route(5);} _________________________________________________________________ Get Hotmail on your mobile, text MSN to 63463! http://mobile.uk.msn.com/pc/mail.aspx

1 0

[OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment
by Adrian Georgescu 13 Jan '08

13 Jan '08

>>> I would _really_ recommend to add this to the installations instructions on openxcap.org. Have a nice weekend! Sebastian Done. We will setup a read/write page for OpenXCAP deployment experiences. Regards, Adrian

1 0

[OpenSER-Users] Script variable duration is unexpected
by Iñaki Baz Castillo 13 Jan '08

13 Jan '08

Hi, I've been suffering an extrange issue and now I've realized why. It's related to script variables and their duration. I'm 90% sure that the behaviour is unexpected according to the doc so I've open a bug containing an easy example: https://sourceforge.net/tracker/index.php?func=detail&aid=1870301&group_id=… My conclusion is that using script variables instead of AVP's can be risky in certain cases. Opinions are welcome. Best regards. -- Iñaki Baz Castillo

1 0

Re: [OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment
by Schumann Sebastian 12 Jan '08

12 Jan '08

Dear all I finally found the mistake: My VMWare ESX server for virtualization is not connected to the internet, my local PC was. It didn't come to my mind ever before. Although - I never saw it documented anywhere, that OpenXCAP needs internet access for downloading the namespace files. I would _really_ recommend to add this to the installations instructions on openxcap.org. Have a nice weekend! Sebastian ________________________________ From: Schumann Sebastian Sent: Friday, 11. January 2008 11:54 AM To: users(a)openser.org Subject: [OpenSER-Users] Strange OpenXCAP behaviour in virtualizedenvironment Dear all This week, I tried again to bring up finally the OpenXCAP server. I tried it first acc. the instruction on OpenXCAP.org on my local virtual VMWare Server 1.0 (before, I always used virtualized ESX server). It worked without major issues, meaning I could install lenny, all required files even via apt-get and the OpenXCAP was running. Surprising for me though, because it never worked yet. Now, when I take _the same_ virtual disk and export it to VMWare ESX server, I get the previously discussed errors: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema How can this be possible? I tried three times with three different machines. They work in VMware Server but not in ESX server. I don't find any answer at all neither can I imagine anyhow, how an application error like this occurs running the program on the very same, identical virtualized system with just two different virtualization platforms around. Anybody else has experiences in that, encountered somehow same strange behaviour with the application or has any other advice? I would really welcome every hint in somehow a direction to solve this. I didn't plan to extend my virtual OpenSER testing platform with a local PC, but it seems I have no other possibility so far... Thanks for your help! A nice weekend to all of you. Best regards Sebastian

2 1

[OpenSER-Users] DB aliases for outgoing calls
by Marc LEURENT 11 Jan '08

11 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Good Evening, I have a little question: I have users with usernames and 10 phone numbers from my SIP/PSTN provider. I have a dbaliases table for incoming calls, in order to redirect the 0xxxxxxxxx number to an user. 0xxxxxxxx1 => bob I would like for outgoing calls to replace the user by the telephone number in the From: Header..... bob => 0xxxxxxxx1 Any idea how to do it? Thanks, Marc Leurent -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHh6ssN4+o+2LtdFwRApxIAKCxqefV7OLejg1Xw6mwre5Yy3jYTQCeM66R bAjagfV/6aoN43hPQcMeKMM= =DQe8 -----END PGP SIGNATURE-----

2 2

[OpenSER-Users] Fix up source address.
by Alex Balashov 11 Jan '08

11 Jan '08

Greetings, I have a strange problem using OpenSER 1.3.x with nathelper. Two ethernet interfaces: eth0 = 192.168.0.0/24 eth1 = outside.ip/29 For some reason, no matter what I do to mangle the requests with nathelper's functions, the packet is *always* sent out of eth1 with the *source address* of the machine's eth0. Obviously, the response from the far-end SIP peer never gets back. The packet does physically go over eth1, I know that much from packet captures. I don't even see how this is possible; when OpenSER issues a packet, shouldn't it originate according to the machine's routing table, take the most specific route, and consequently, adopt the right source address? What gives? I have OpenSER 'listening' on both interfaces, and have tried both on and off with this setting. Thanks, -- Alex Balashov Evariste Systems Web : http://www.evaristesys.com/ Tel : +1-678-954-0670 Direct : +1-678-954-0671

3 5

[OpenSER-Users] RTP-Proxy
by Helmut Kuper 11 Jan '08

11 Jan '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, does anybody know, if openser+rtpproxy are able to detect rtp-timeouts and react on them? It would be good for billing. regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHhjWa4tZeNddg3dwRAmZcAJkBmJGh6b2qt/6NbFri0mBZU9BwPQCeNYNS Pb+u2IWB4Xp2K8G9fHkQKyo= =MxAh -----END PGP SIGNATURE-----

9 19

[Serusers] how to replace ruri host part with an avp value?
by Tomasz Zieleniewski 11 Jan '08

11 Jan '08

Hi, How can one replace the ruri host part with the usage of attr2uri method? One can change the domain part with the usage of "domain" param but this leaves the port not changed. I would like to replace the whole host part together with port value. Maybe this can be done other way round? Thanks in advance for any help. Bests -tomasz

2 2

[OpenSER-Users] OpenXCAP: rls-services 404 Not found,and no log?
by KevinKinnan 11 Jan '08

11 Jan '08

I tried example of rfc 4825. Creating resource-lists is ok, but not rls-services, 404 not found response is received. And, there is not any new log appearing in the syslog, I can't debug where I am wrong. HTTP URI is: http://xcap-root/rls-services/users/sip:alice@open-ims.test/index XML is: <?xml version=\"1.0\" encoding=\"UTF-8\"?> <rls-services xmlns=\"urn:ietf:params:xml:ns:rls-services\"> <service uri=\"sip:myfriends@open-ims.test\"> <resource-list>http://xcap-root/resource-lists/users/sip:alice@open-ims.test/index/~~/reso…</resource-list> <packages> <package>presence</package> </packages> </service> </rls-services> Regards, Kevin _________________________________________________________________ 手机也能上 MSN 聊天了，快来试试吧！ http://mobile.msn.com.cn/

2 1

[OpenSER-Users] Strange OpenXCAP behaviour in virtualized environment
by Schumann Sebastian 11 Jan '08

11 Jan '08

Dear all This week, I tried again to bring up finally the OpenXCAP server. I tried it first acc. the instruction on OpenXCAP.org on my local virtual VMWare Server 1.0 (before, I always used virtualized ESX server). It worked without major issues, meaning I could install lenny, all required files even via apt-get and the OpenXCAP was running. Surprising for me though, because it never worked yet. Now, when I take _the same_ virtual disk and export it to VMWare ESX server, I get the previously discussed errors: Sep 25 17:01:21 openxcap openxcap[11876]: [-] Log opened. Sep 25 17:01:21 openxcap openxcap[11876]: [-] Starting Open XCAP 0.9.3 Sep 25 17:01:27 openxcap openxcap[11876]: [-] Traceback (most recent call last): Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/bin/openxcap", line 56, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.server import XCAPServer Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/server.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap import authentication Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/authentication.py", line 21, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] from xcap.appusage import getApplicationForURI Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 466, in ? Sep 25 17:01:27 openxcap openxcap[11876]: [-] applications = {'xcap-caps': XCAPCapabilitiesApplication(), Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "/usr/lib/python2.4/site-packages/xcap/appusage/__init__.py", line 64, in __init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] self.xml_schema = etree.XMLSchema(xml_schema_doc) Sep 25 17:01:27 openxcap openxcap[11876]: [-] File "xmlschema.pxi", line 67, in etree.XMLSchema.__init__ Sep 25 17:01:27 openxcap openxcap[11876]: [-] etree.XMLSchemaParseError: Document is not valid XML Schema How can this be possible? I tried three times with three different machines. They work in VMware Server but not in ESX server. I don't find any answer at all neither can I imagine anyhow, how an application error like this occurs running the program on the very same, identical virtualized system with just two different virtualization platforms around. Anybody else has experiences in that, encountered somehow same strange behaviour with the application or has any other advice? I would really welcome every hint in somehow a direction to solve this. I didn't plan to extend my virtual OpenSER testing platform with a local PC, but it seems I have no other possibility so far... Thanks for your help! A nice weekend to all of you. Best regards Sebastian

1 0

[OpenSER-Users] Testing.... List Working?
by Douglas Garstang 11 Jan '08

11 Jan '08

Is the list working? Haven't seen much traffic on list today. First post was ok. Second went to list and archive, but I never received it via email. Third has gone nowhere! This is my 4th... ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

1 0

[OpenSER-Users] TLS problem.
by fengbin 11 Jan '08

11 Jan '08

Hi,all I met a strange problem while I am testing TLS connection between minisip and openser. The following is my openser.cfg (part of that) ......... fork=no log_stderror=yes # Uncomment this to prevent the blacklisting of temporary not available destinations #disable_dns_blacklist=yes # # Uncomment this to prevent the IPv6 lookup after v4 dns lookup failures #dns_try_ipv6=no # uncomment the following lines for TLS support disable_tls = 0 listen = tls:10.11.57.197:5060 tls_verify_client = 1 tls_method = TLSv1 tls_certificate = "/usr/local/etc/openser//tls/user/user-cert.pem" tls_private_key = "/usr/local/etc/openser//tls/user/user-privkey.pem" tls_ca_list = "/usr/local/etc/openser//tls/user/user-calist.pem" tls_ciphers_list="NULL-SHA:NULL-MD5:AES256-SHA:AES128-SHA" ...... When I set "tls:10.11.57.197:5061" the registration never succeed. But if I set it to 5060 the registration over TLS is OK. I compared the log of two scenarioes and found the TLS session both are OK,but the difference is that: when the port is 5061 there is an error of forwarding. but the forwarding is because openser think it's not the destination of the registration request. See bellow: Jan 10 16:46:56 [9199] DBG:rr:after_loose: No next URI found Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 16:46:56 [9199] DBG:core:grep_sock_info: checking if port 5061 matches port 5060 Jan 10 16:46:56 [9199] DBG:core:check_self: host != me Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 16:46:56 [9199] DBG:tm:t_newtran: T on entrance=0xffffffff Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 16:46:56 [9199] DBG:core:parse_headers: flags=78 Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: start searching: hash=58073, isACK=0 Jan 10 16:46:56 [9199] DBG:tm:matching_3261: RFC3261 transaction matching failed Jan 10 16:46:56 [9199] DBG:tm:t_lookup_request: no transaction found Jan 10 16:46:56 [9199] DBG:core:mk_proxy: doing DNS lookup... Jan 10 16:46:56 [9199] ERROR:tm:update_uac_dst: failed to fwd to af 2, proto 1 (no corresponding listening socket) Jan 10 16:46:56 [9199] ERROR:tm:t_forward_nonack: failure to add branches With comparition to that when the port is set to 5060 the trace is : Jan 10 17:07:59 [9410] DBG:rr:find_next_route: No next Route HF found Jan 10 17:07:59 [9410] DBG:rr:after_loose: No next URI found Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if host==us: 12==12 && [10.11.57.197] == [10.11.57.197] Jan 10 17:07:59 [9410] DBG:core:grep_sock_info: checking if port 5060 matches port 5060 Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=8000000 Jan 10 17:07:59 [9410] DBG:core:parse_headers: flags=ffffffffffffffff Jan 10 17:07:59 [9410] DBG:registrar:build_contact: created Contact HF: Contact: <sip:888@10.11.57.192:5061;transport=TLS>;expires=1000 And there is no fwd needed then.So the error didnt occur. Its a little bit strange that when I set the port to 5061,why did openser check the port 5060????? Can anyone help me to figure it out? THX BR -- Fengbin

3 5

[OpenSER-Users] OpenSER Question
by ListAcct 11 Jan '08

11 Jan '08

Hello, I wanted someones honest opinion. I have ran across and read a little on SER and OpenSER have not yet had much time. But would you recommend OpenSER for a service provider who is wanting or thinking about deploying VoIP service for its customers? What other products would you recommend to work along with OpenSER such as billing and accounting interfacing. We have used Asterisk for our internal PBX for about two years and love it. Or would you recommend staying with a commercial product like Cisco or Sonus? We prefer open source since our base will be small to start and not large enough to justify a Sonus which is the preferred commercial product. Any advice is definitely appreciated. Otis.

2 3

[OpenSER-Users] Configuration Data....?
by Douglas Garstang 11 Jan '08

11 Jan '08

I need a way in OpenSER to store some simple configuration data. For example, if a parameter is set, I might perform database updates with avp_db_query(). I looked at the dbtext, db_berkeley and flatstore modules and realise that they cannot be used for storing generic information. They are designed to be used as a db store for userloc info etc. So, simple question, how can I store global persistent (on disk is ok) information and retrieve it with OpenSER? Thanks, Doug. ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping

2 1

[OpenSER-Users] Forward to voicemail when not registered
by CSB 10 Jan '08

10 Jan '08

I want to provide for forwarding of calls to voicemail in various circumstances, one of which is when the user is not registered with the registrar. I've looked at various example configuration files that include forwarding (e.g. http://www.sipwise.com/wizard, onsip.org) and have not seen an implementation of this. Could anyone provide any tips regarding this or is it as simple as: route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- <snip> if (!lookup("location")) { if (avp_db_load("$ruri/username", "$avp(i:20116)")) { avp_pushto("$ruri", "$avp(i:20116)"); t_relay; return; } else { sl_send_reply("404", "User Not Found"); return; }; <snip> Am I missing something obvious or is this really quite simple? Regards Cameron

2 1

[OpenSER-Users] openser 1.3 and Serweb
by Daniel 10 Jan '08

10 Jan '08

Hi there, What about openser 1.3 and serweb 0.9.6 ? Do they work fine together ? any experiences ? Regards, daniel -- Daniel Grotti ________________________ e-mail : d.grotti(a)gmail.com

1 0

[Serusers] SER 2_0_0 ERROR: slow timer too slow
by tzieleniewski 10 Jan '08

10 Jan '08

Hi, I encountered the following error: Jun 15 08:57:21 rd ser[12680]: ERROR: slow timer too slow: overflow (7997 - 6974 = 1023) Jun 15 08:57:24 rd last message repeated 46 times Could you please point me what could be the reason? Thanks in advance. Tomasz

2 1

[OpenSER-Users] cdrtool datasources
by TCB 10 Jan '08

10 Jan '08

How do i create a datasource for Cisco RAS. -- TC

1 0

[OpenSER-Users] OpenSER & RADIUS accounting with radiusclient-ng
by Antun Mihalicek 10 Jan '08

10 Jan '08

Hi! I'm trying to enable RADIUS accounting on OpenSER with the use of radiusclient-ng, and using FreeRADIUS as radius server. When I initiate or terminate a session on OpenSER, following error occurs: Jan 10 12:21:58 [30155] ERROR:acc:acc_rad_request: radius-ing failed I've been googling for this issue, and I've found out that some people also had this error, but in their case RADIUS packet was sent to RADIUS server but was rejected , but in my case it wasn't even sent to the RADIUS server, as I saw from debug output on FreeRADIUS. As I've seen on forums, people said that this kind of error means that something's wrong with radiusclient-ng. I've used radiusclient-ng 0.5.5 & 0.5.6, both with same results. Did anyone had similar problem? Does radiusclient-ng have some kind of log or something? Thanks for your answer! openser.conf: #set module path mpath="/usr/local/lib/openser/modules/" /* uncomment next line for MySQL DB support */ #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "auth_radius.so" loadmodule "auth.so" loadmodule "group_radius.so" loadmodule "avp_radius.so" loadmodule "avpops.so" ..... # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("acc", "service_type", 15) #modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) ....

3 3

[OpenSER-Users] Parallel Forking
by Gomtesh Jain 10 Jan '08

10 Jan '08

Hi All, I am facing some problem in parallel forking . how should I handle the scenario where I get 200 ok response from both the branch . Gomtesh

2 3

[OpenSER-Users] Openxcap modification - setting config and runtime dir
by Tomasz Zieleniewski 10 Jan '08

10 Jan '08

Hi, I made a small modification in openxcap version 0.9.7 in file openxcap it enables now to specify the configuration directory and runtime directory. This is very useful when You run openxcap in deamon mode. xcap@venom:~/src/openxcap-0.9.7$ ./openxcap -h usage: openxcap [options] options: --version show program's version number and exit -h, --help show this help message and exit --no-fork run the process in the foreground (for debugging) --pid=File pid file (/var/run/openxcap/openxcap.pid) --conf-dir=Dir config directory (/etc/openxcap) --run-dir=Dir pid file (/var/run/openxcap) Cheers tomasz

1 0

[Serusers] alias as regular expression
by Sandrinho 09 Jan '08

09 Jan '08

Hi all. Is it possible to configure aliases as regular expressions? I mean: I have to manage some accounts on a SER: each account must receive calls on an arc of numbers. so i have an account "foo" with (for example) 200 aliases foo000,foo001,...,foo199. Is it possible to configure only one alias in form of regexp? "foo[01][0-9][0-9]" in this case I don't want to touch ser.cfg. Thanks a lot. Sandro.

1 0

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Got it, you are right , This is set as the default for > rewrite_prefix_column in the > online manual( This might be a typo). > > Got it working 100% now , thanks > > modparam("carrierroute", "rewrite_prefix_column", "rewrite_host" Good. Yes, there is a typo in the documentation. I'll fix this. Cheers, Henning

1 0

[OpenSER-Users] uac_replace_from
by CSB 09 Jan '08

09 Jan '08

I wish to replace the from address in the following manner Received From: "05551233" sip:05551233@203.89.001.001 Replaced From: "5551233" sip:18585551233@203.89.001.001 In other words I want to do what the strip and prefix commands do but on a from header. Could anyone advise how this can be achieved in OpenSER 1.1? Regards Cameron

2 2

Re: [OpenSER-Users] Carrirroute
by Henning Westerholt 09 Jan '08

09 Jan '08

On Wednesday 09 January 2008, TCB wrote: > Thanks Henning , i have just realised i had not set the prob, > now the routing works but i'm afraid i have created another > problem. For some reason the ip address is being prefixed to the > called number. > See below. > > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:get_route_tree_by_id: searching in carrier default > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > DBG:carrierroute:get_route_tree_by_id: tree default, domain 0 : 0 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: DBG:core:hash_func: hash: > 2298 % 1000 = 298 > Jan 9 14:56:02 ss-za /usr/sbin/openser[20127]: > INFO:carrierroute:carrier_rewrite_msg: uri 0727785841 was rewritten to sip: > 196.15.164.13727785841(a)196.15.164.13 > > My carrierroute table looks like this: > > id | carrier | scan_prefix | domain | prob | strip | rewrite_host | rewrite_prefix | rewrite_suffix > ----+---------+-------------+--------+------+-------+---------------+----------------+---------------- > 2 | 0 | 072 | 0 | 1 | 1 | 19.1.164.13 | 27 | > 1 | 0 | 011 | 0 | 1 | 1 | 19.1.164.13 | 27 | Hi, your table is correct. I've seens this before, there was some user who copied the content of rewrite_host into rewrite_prefix, i think. Could you check if the RAM-cache on the module has also the correct data? (with 'openserctl fifo cr_dump_routes') Do you do other RURI rewriting before the route[22] where the cr method is called? Cheers, Henning

1 0

[Serusers] parallel forking
by Steven C. Blair 09 Jan '08

09 Jan '08

I seem to be running into problems using avps and parallel forking. Is it possible to insure the invite message sent to each contact address has the same "avp checks" performed for the username portion of the URI? Thanks,Steve

1 0

[OpenSER-Users] OpenSER in front of Asterisk
by lists＠infoway.net 09 Jan '08

09 Jan '08

Hi all, I'm relatively new to OpenSER (and SER for that matter). I have the following need and can't quite figure out how to do it. We have several Asterisk servers being used strictly for IVR purposes (IVR cluster). We also have several Asterisk servers used for standard telephone services and Agent/Queue services (telephone Cluster). We would like to setup one or two OpenSER machines in front of all that to serve the following purposes: 1) Route incoming calls appropriately to either the IVR cluster or the telephone cluster based on the DNIS 2) Be used as LCR servers so that the telephone cluster will send all outbound calls to and the OpenSER will determine if it needs to reach one of our termination carriers or simply just handle it internally (e.g. extension-to-extension calling) 3) When a caller in the IVR presses certain options, the caller may be transferred to an agent. So, we need to take the call away from the IVR cluster (possibly back to the OpenSER server) and redirect it to the telephone cluster so that an agent may handle the caller 4) CDR and billing purposes 5) Ideally, all our telephone users would register with OpenSER (instead of the Asterisk telephone cluster) and for "regular" calls, we could just handle everything within OpenSER, and only involve the telephone cluster if we need to redirect to voicemail or something like that We have read on the wiki about integrating SER with Asterisk for voicemail. We also have some snippets, mainly from the mailing list, about SER load balancing traffic to Asterisk. However, we really haven't found something that could address all items above. Could anyone provide some hits, snippets, or references to what we need in order to accomplish these goals? Thanks

1 0

[OpenSER-Users] Configuring openser to forward incoming to a conference agent
by Pascal Maugeri 09 Jan '08

09 Jan '08

Hi I'm developing a "conference agent" that will receive INVITEs and invites a list of invitees defined in the SIP INVITE message payload. Let's say that this agent is available behind the URI sip:conf@yourdomain.com and openser should forward all incoming "INVITE sip:conf@yourdomain.com SIP/2.0" to my agent. How should I configure openser to do that ? The easiest way would be to have my conference agent to REGISTER against the openser but I don't want to maintain this registration and I think there is a better way to do that. I've seen there is also a function called "ul_insert_urecord" in USRLOC module. Might it be a possible solution to add a new entry for my conference agent ? Any other solution or idea ? Regards, Pascal

2 1

[OpenSER-Users] presence caching and retrieval
by Sigrid Thijs 09 Jan '08

09 Jan '08

Hi, I was wondering, when a SIP user publishes his presence to the openser presence module, is this presence data cached in memory by the server or is this immediately stored in the database? Is this somehow configurable? If the presence data is cached in memory, is there an interface available for an external server to query the presence of one or more resources? In particular, we are looking for a performant way to query the presence of multiple users (for example 20). We would like to avoid the overhead of creating a SIP subscription for each resource: - to avoid traffic overhead - we only need to know the current presence of the resource(s) and are not interested in future presence changes. Do you have any suggestions on if/how this can be achieved with openser? kind regards, Sigrid Thijs

2 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users