- sr-users - kamailio.org

Re: [Serusers] MySql Accounting
by KUMAR 08 Jun '07

08 Jun '07

Here's the ser.cfg that i've changed to enable accounting in MySql. But I still don't see anything in the database. Isn't it supposed to show up in acc table? Thank You kumar On 6/7/07, Eneref <eneref(a)arcdiv.com> wrote: > Is there a convenient way to write both in SER 2.0? In SER 0.9.6, I > simply had 1 flag, and the acc module abstracted all the necessary > details out for me. Depending upon how I'd compiled it, my 1 flag > allowed me to write to mysql, syslog, and/or radius in whatever > combination I wished. > > Now that the abstraction of a single, simple logging class has been > replaced by the increased complexity of 3 separate logging classes, that > methodology is no longer possible. Does one now simply set several flags > at each turn to determine where to log the data? > > N. > > > Hendrik Scholz wrote: > > Hi! > > > > KUMAR wrote: > > > >> Thank you Hendrik for pointing out the mistake. But I also cannot see > >> any accounting information in the MySql Database. Can you tell me why? > >> Obviouly I am missing something here. > >> > > > > You are using acc_syslog and not acc_db. > > acc_syslog writes syslog entries whereas acc_db relies on a database > > backend. > > > > Cheers, > > Hendrik > > > > > >

2 2

[Users] Problem with proxydispatcher
by hung.nguyen＠vienthongso.com 08 Jun '07

08 Jun '07

Hi all, I have problem with dispatcher following: When i see in proxydispatcher have support "Distributed geographical location" I call setup call: caller (from: 101(a)hanoi.openser.com) ----> callee(200(a)danang.openser.com). In openser.cfg i use "use_media_proxy();" and "modparam("mediaproxy","mediaproxy_socket","/var/run/proxydispatcher.sock")" I set defaultProxy = None in mediaproxy.ini file to dispatcher selected mediaproxy based on the SIP domain of the caller/destination using DNS SRV records. On DNS i have mediaproxy for domain hanoi.openser.com is media1.hanoi.openser.com, for domain danang.openser.com is media1.danang.openser.com But dispatcher no select domain based on the SIP domain of the caller/destination. Please help me. Thanks.

1 0

[Serusers] Parse Error : Bad Via?
by Ricardo Martinez 07 Jun '07

07 Jun '07

Hello list. I'm getting this error for a REGISTER. REGISTER sip:lidersippy.redvoiss.net SIP/2.0. Via: SIP/2.0/UDP 200.68.45.114:37206;branch=z9hG4bK0a00323b0000000b4666e12d0000305100000009;. From: <sip:553100009880@mydomain.net>;tag=2bad6e229e4. To: <sip:553100009880@mydomain.net>. Contact: <sip:553100009880@200.68.45.114:37206;user=phone>. Call-ID: ECEB6C3024274F41945FDDBC5CF502250x0a00323b. CSeq: 9 REGISTER. Max-Forwards: 70. User-Agent: SJphone/1.63.321a (SJ Labs). Content-Length: 0. . Jun 6 12:31:39 liderpx ser[28075]: ERROR: parse_via: invalid via - end of header in state 6 Jun 6 12:31:39 liderpx ser[28075]: ERROR: parse_via on: <SIP/2.0/UDP 200.68.45.114:37206;branch=z9hG4bK0a00323b0000000b4666e12d0000 > ntent-Length: 0ne/1.63.321a (SJ Labs)250x0a00323b=phone>e229e4 Jun 6 12:31:39 liderpx ser[28075]: ERROR: parse_via parse error, parsed so far:<SIP/2.0/UDP 200.68.45.114:37206;branch=z9hG4bK0a003 > 0000000b4666e12d0000305100000009; Jun 6 12:31:39 liderpx ser[28075]: ERROR: get_hdr_field: bad via Jun 6 12:31:39 liderpx ser[28075]: ERROR: bad header field > ntent-Length: 0ne/1.63.321a (SJ Labs)250x0a00323b=phone>e229e400b4666e12d0000305100000009;ss.net SIP/2.0 Jun 6 12:31:39 liderpx ser[28075]: ERROR: receive_msg: parse_msg failed Does anyone knows what is going on? Thanks! Regards, Ricardo .-

2 2

[Users] Problems with SNMPstats module
by Sergio Gutierrez 07 Jun '07

07 Jun '07

Hello list. I am upgrading Openser to version 1.2.1, and I am having a core dumping when configuring snmpstats module; it starts fine, but, at any event which causes interaction with snmpstat module (user registration) it crashes. My Scenario: Solaris 10 on Sparc Openser 1.2.1 NET-SNMP 5.4 GCC 4.0.4 Below appears the backtrace of the core. #0 0x00000000 in ?? () #1 0xfe989540 in createRowsFromIPList (theList=0x1731e8, listSize=1, protocol=0, snmpIndex=0x0) at openserSIPPortTable.c:125 #2 0xfe9898b8 in init_openserSIPPortTable () at openserSIPPortTable.c:241 #3 0xfe98d1bc in spawn_agentx_child () at sub_agent.c:74 #4 0xfe98c778 in mod_child_init (rank=0) at snmpstats.c:271 #5 0x0008c3c8 in init_mod_child (m=0x80, rank=0, type=0xe9570 "PROC_MAIN") at sr_module.c:400 #6 0x0008c4f0 in init_child (rank=0) at sr_module.c:394 #7 0x00039608 in main_loop () at main.c:948 #8 0x0003b178 in main (argc=1118208, argv=0x302) at main.c:1399 Thanks in advance for every help. Kind regards Sergio Gutiérrez UNE EPM Telecomunicaciones Medellin - Colombia

3 3

Re: [Serusers] ser/serweb multiple domains
by Jiri Kuthan 07 Jun '07

07 Jun '07

if you see nothing coming out, I would dirst check logs and then look at what is running over loopback interface, just to be able to better narrow down the problem. -jiri At 15:39 07/06/2007, flavio wrote: >Hi all, >I'm testing ser/serweb for multiple domains support. >I've successfully configured serweb to manage my default domain >(10.28.19.202, ip address for pc on which ser running) and edavoip >(another test domain, configured through an Apache virtual hosting, on >the same). >So I try to register a UAC to edavoip ser domain: I've configure the >same pc as DNS, in order to resolv edavoip with the right ip address >(10.28.19.202). >The risult is that REGISTER SIP message is sent properly to >10.28.19.202 but ser does not reply to message, as followed reported >by ngrep lines: > >U 2007/06/07 15:28:22.913028 10.28.19.124:5060 -> 10.28.19.202:5060 >REGISTER sip:edavoip SIP/2.0. >Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK21175bf079b2b794. >From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. >To: <sip:0192091221@edavoip>. >Contact: <sip:0192091221@10.28.19.124>. >Supported: replaces. >Call-ID: b9ed1773b0c8ad7b(a)10.28.19.124. >CSeq: 100 REGISTER. >Expires: 3600. >User-Agent: Grandstream BT110 1.0.8.12. >Max-Forwards: 70. >Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. >Content-Length: 0. > >U 2007/06/07 15:28:23.302718 10.28.19.202:5060 -> 10.28.19.202:5060 >REGISTER sip:edavoip SIP/2.0. >Via: SIP/2.0/UDP 10.28.19.202;branch=z9hG4bKc834.9dd67847.0. >Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK353ff63bd2e31b1b. >From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. >To: <sip:0192091221@edavoip>. >Contact: <sip:0192091221@10.28.19.124>. >Supported: replaces. >Call-ID: ba27f6c1646bbb9d(a)10.28.19.124. >CSeq: 100 REGISTER. >Expires: 3600. >User-Agent: Grandstream BT110 1.0.8.12. >Max-Forwards: 16. >Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. >Content-Length: 0. > >Any suggestion about this issue?? > >Thanks for support, > >Flavio > >-- >******************************** >* (o< ing. Patria Flavio >* //\ phone 0823451358 >* V_/_ mobile 3407873357 >* >******************************** >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Users] Can not connect SEMS on openser
by chungyu 07 Jun '07

07 Jun '07

Hi all: I want to inetgrating SEMS and openser, use SEMS for sending voicemail. openser version is 1.2.1 sems(sip express media server) vsersion is 0.9.x This is my configuration on openser.cfg. If user is offline then send voicemail. loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "avpops.so" modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ser") modparam("avpops", "avp_table", "subscriber") modparam("avpops", "uuid_cloumn", "uuid") modparam("avpops", "username_cloumn", "username") modparam("avpops", "db_scheme", "email_scheme:table=subscriber;value_col=email_address;value_type=string") modparam("tm", "tw_append", "voicemail_headers: UA=$hdr(User-Agent);P-Email-Address=$avp(s:email)") ... ... ... if (!lookup("location")) { if (!t_newtran()){ sl_send_reply("500", "could not create new transaction"); exit; }; avp_db_load("$ru/username", "$avp(s:email)/$email_scheme"); if (!t_write_req("/tmp/am_fifo", "voicemail/voicemail_headers")){ t_reply("500", "could not connect sems"); exit; }; }; .... The SEMS has started but system reply "server error occurred(1/SL)". And error message list: Jun 7 19:13:35 host /usr/local/sbin/openser[28470]: ERROR:tm:t_should_relayy_response: pick_branch failed (lowest==-1) for code 408 Jun 7 19:13:35 host last message repeated 7 times Jun 7 19:13:39 host /usr/local/sbin/openser[28470]: ERROR:tm:t_forward_nonack: no branch for forwarding Jun 7 19:13:39 host /usr/local/sbin/openser[28470]: ERROR:tm:w_t_relay: t_forward_nonack failed Jun 7 19:13:39 host Sems[73979]: Error: (AmRequest.cpp)(reply)(335): AmRequestUAS::reply: 400 Too few or too many arguments Jun 7 19:13:39 host Sems[73979]: Error: (AmRequest.cpp)(reply)(335): AmRequestUAS::reply: 400 Too few or too many arguments Jun 7 19:13:39 host Sems[73979]: Error: (AmSession.cpp)(run)(193): 500 could not send response. Jun 7 19:13:39 host Sems[73979]: Error: (AmRequest.cpp)(reply)(335): AmRequestUAS::reply: 400 Too few or too many arguments Jun 7 19:13:39 host last message repeated 2 times Jun 7 19:13:39 host Sems[73979]: Error: (AmSession.cpp)(run)(193): 500 could not send response. Jun 7 19:13:39 host Sems[73979]: Error: (AmRequest.cpp)(reply)(335): AmRequestUAS::reply: 400 Too few or too many arguments What's problem with my configuration? Thank you for your reply. Chungyu

2 1

[Users] Re:snmpstats modules and net-snmp5.4
by zhaojunjie01＠st.lzu.edu.cn 07 Jun '07

07 Jun '07

I have solved this problem .Just install net-snmp 5.3.1 instead of 5.4.But when I use snmpget command it can't found oid.Can anyone give me some suggestion,Thank you! Best Regards

2 1

[Serusers] ser/serweb multiple domains
by flavio 07 Jun '07

07 Jun '07

Hi all, I'm testing ser/serweb for multiple domains support. I've successfully configured serweb to manage my default domain (10.28.19.202, ip address for pc on which ser running) and edavoip (another test domain, configured through an Apache virtual hosting, on the same). So I try to register a UAC to edavoip ser domain: I've configure the same pc as DNS, in order to resolv edavoip with the right ip address (10.28.19.202). The risult is that REGISTER SIP message is sent properly to 10.28.19.202 but ser does not reply to message, as followed reported by ngrep lines: U 2007/06/07 15:28:22.913028 10.28.19.124:5060 -> 10.28.19.202:5060 REGISTER sip:edavoip SIP/2.0. Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK21175bf079b2b794. From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. To: <sip:0192091221@edavoip>. Contact: <sip:0192091221@10.28.19.124>. Supported: replaces. Call-ID: b9ed1773b0c8ad7b(a)10.28.19.124. CSeq: 100 REGISTER. Expires: 3600. User-Agent: Grandstream BT110 1.0.8.12. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. Content-Length: 0. U 2007/06/07 15:28:23.302718 10.28.19.202:5060 -> 10.28.19.202:5060 REGISTER sip:edavoip SIP/2.0. Via: SIP/2.0/UDP 10.28.19.202;branch=z9hG4bKc834.9dd67847.0. Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK353ff63bd2e31b1b. From: <sip:0192091221@edavoip>;tag=ec22721991ce1308. To: <sip:0192091221@edavoip>. Contact: <sip:0192091221@10.28.19.124>. Supported: replaces. Call-ID: ba27f6c1646bbb9d(a)10.28.19.124. CSeq: 100 REGISTER. Expires: 3600. User-Agent: Grandstream BT110 1.0.8.12. Max-Forwards: 16. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. Content-Length: 0. Any suggestion about this issue?? Thanks for support, Flavio -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

1 1

Re: [Serusers] [Serweb-users] OpenSER and SERWeb problems logging on (that old chestnut)
by flavio 07 Jun '07

07 Jun '07

May 29 11:49:19 *serweb* [error] file: /opt/*serweb*-0.9.6/html/data_layer.php:465: DB Error: connect failed - [nativecode=Access denied for user 'ser'@'localhost' (using password: YES)] ** mysql://ser:heslo@localhost/ser<http://www.voipuser.org/ship_to.php?url=mysql://ser:heslo@localhost/ser> Do you access mysql with mysql -u ser -p $>password: heslo ? If yes, try to start mysqld with --old-password option following tips at url: http://dev.mysql.com/doc/refman/5.0/en/old-client.html Bye, F. -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

4 15

[Serusers] @to.tag="" not detecting empty To tag?
by samuel 07 Jun '07

07 Jun '07

Hi folks, I am moving production to SER2 rc 2.0 and can not make @to.tag=="" to work. For example, in initial INVITEs: # if this is an initial INVITE (without a To-tag) we might try another # (forwarding or voicemail) target after receiving an error if (method=="INVITE" && @to.tag=="") { xlog("L_ERR","LXLOG: initial INVITE (no Totag) setting FAILURE_ROUTE"); t_on_failure("FAILURE_ROUTE"); } FAILURE_ROUTE is never called. While next check works (in the sense the failure route is processed). if (method=="INVITE") { xlog("L_ERR","LXLOG: INVITE setting FAILURE_ROUTE"); t_on_failure("FAILURE_ROUTE"); } So I am wondering whether @to.tag=="" works for empty To tag....can anyone confirm it? Thanks, Samuel.

2 4

[Serusers] SERWEB.
by dciepiel＠orange.pl 07 Jun '07

07 Jun '07

Hi, I have problem with login operaton in SERWEB. Everything works fine in text interface so I decided to install web interface for easerly navigation. I have installed Serweb-0.9.4, also php4 and phpmyadmin. When I try to login at first time I recieved tree wornings from php: Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/prolog.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 79 192.168.2.2 admin interface Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/separator.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 81 Warning: virtual() [function.virtual]: Unable to include '/www/htdocs/serweb/htmldomains/_default/epilog.html' - request execution failed in /www/htdocs/serweb/html/page.php on line 104 However, login page open without any graphic elements but I am able to put user name and password. I have read that default login and password is admin/heslo. So I put them and recieved an information: "Bad username or password". If anybody could give me some guidelines how to remove those warnings and why I cannot login with default user name and password I will be appreciative. Thanks for any help. cheers, Daniel

1 0

[Users] Problem in Load Balancing with 2 openSER proxies Server..
by raviprakash sunkara 07 Jun '07

07 Jun '07

Hi Users Am doing the Load-balance. I Have to 2 openser sip proxies Server with Different IP The Sip domain is napped the two ip's of the OPENSER Proxies This for failure and load-balancing of the SIP proxies When AM testing Two UAC's are Register in one the SIP proxy-A . When the call is Established , I Stop the First SIP proxy-A , and Stared the Second SipProxy-B , Call flow is fine for the UAC and UAS 's also but in Debug mode of second proxy-B is seen the Follow ing Error. ERROR: udp_send: sendto(sock,0x20b6bc,4,0,0xbfe13840,16): Bad file descriptor(9) 1(19010) ERROR: udp_send: sendto(sock,0x78e1d8,4,0,0xbfe13790,16): Bad file descriptor(9) 1(19010) ERROR:nathelper:nh_timer: udp udp_send failed 1(19010) ERROR: udp_send: sendto(sock,0x78e1d8,4,0,0xbfe13790,16): Bad file descriptor(9) 1(19010) ERROR:nathelper:nh_timer: udp udp_send failed PLease any one help me............ ! -- Thanks &Regards Ravi Prakash Sunkara

1 1

[Serusers] REMINDER: Please vote on the technical board candidates before end of day Sunday, June 10!!
by Greger V. Teigre 07 Jun '07

07 Jun '07

Remember to vote before voting closes end of day Sunday, June 10!! You don't have to vote on five people, just write down (now!) the names of the people you want to see on the board and send to greger(a)iptel.org or one of the lists. The people you can choose from are: Raphael Coeffic (SEMS), Stefan Sayer (SEMS), Jan Janak, Andrei Pelinescu-Onciul, N. (Arcdiv.com), Martin Hoffmann, Greger Viken Teigre, Hendrik Scholz Feel free to also send an email to greger(a)iptel.org if you have any questions. g-) ---------------------- Voting on candidates for the technical board of iptel.org is now open and will be open until end of day Sunday, June 10. The rules governing the voting can be found at http://www.iptel.org/technicalboard/rules. A summary/howto can be found below. Where to send your vote =================== To make a public vote: send an email to one or more of the iptel.org lists seruser(a)iptel.rog, serdev(a)iptel.org, semsdev(a)iptel.org To make a secret vote: send an email to the coordinator at greger(a)iptel.org How to vote =========== The candidates can be found at http://www.iptel.org/nominations_and_voting_technical_board_2007. We have a total of eight candidates. Send an email with subject line "Vote: Technical Board" listing 1-5 people from the candidate list that you want on the iptel.org technical board. Each name listed in your email will give one vote to that person. Please note: * The board has an assigned seat for a SEMS representative and there are two candidates from SEMS (marked on the list of candidates). The SEMS seat will be assigned to the candidate with the highest number of votes counting only these two. * Two members of the board must have SER CVS write privileges (SER developer). Thus, the two candidates with such privileges having the highest number of votes will be elected. * The remaining three seat do not have any restrictions. Thus, once the SEMS and SER developer representatives have been elected, the remaining three candidates with the highest number of votes will be elected. * The number of votes for each candidate will be listed on http://www.iptel.org/nominations_and_voting_technical_board_2007 _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

5 5

[Users] presence cfg example for trunk versions
by Toni Barata 07 Jun '07

07 Jun '07

Hi all Can someone send me an openser.cfg example with presence support for trunk version? Thanks in advance, Toni

2 4

[Serusers] MySql Accounting
by KUMAR 07 Jun '07

07 Jun '07

Hi all, I am using SER 2.0 rc1. I am trying to make MySql accounting work. I have also attached my ser.cfg file. I don't see any error message while starting SER, but also, nothing is inserted in the acc table. Obviously, I am missing something. Is there some compile time option that i need to set to make this work. Please help me out. Thank you Kumar

3 4

[Serusers] Vote: Technical Board
by flavio 07 Jun '07

07 Jun '07

My votes: Greger Viken Teigre Martin Hoffmann Stefan Sayer -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

1 0

[Serusers] avp_radius - ser2.1 - Access Request Contents
by tzieleniewski 07 Jun '07

07 Jun '07

hi! When I invoke the radius_load_attrs() the message send to radius has the following shape: Thu Mar 8 10:50:46 2007 Packet-Type = Access-Request User-Name = "sip:hellboy@voip.rd.touk.pl" SER-Service-Type = Get-User-Attrs NAS-Port = 0 NAS-IP-Address = 127.0.0.1 the message doesn't contain any authentication data like password. so do I understand right that radius in such case should be configured in such a way to accept any message of the SER-Service-Type = Get-User-Attrs? Are still the avp loaded from radius prefixed or they are just put into the particular track and class? Could You please give me one example of the radius one avp record and the shape in which it will appear in ser after loading. Thank you in advance Best Tomasz

4 7

[Users] AVP and regular expression
by Savolainen Dmitri 07 Jun '07

07 Jun '07

Hi All! i'm trying to use regular expression that is a value of AVP. for example: $avp(s:regexp) = '^([1-9][0-9]{6})'; $avp(s:value) = '8881\1'; subst_user('/$avp(s:regexp)/$avp(s:value)/'); and it doesn't work. meanwhile this works properly: subst_user('/^([0-9]{7})/888\1/'); Does anybody know how can i resolve this question? Best regards, Savolainen Dmitri

1 0

Re: [Serusers] SER's MySql Tables display
by Cyprian Clement 07 Jun '07

07 Jun '07

Hello Samuel, Many thanks for your quick and useful response. It has done the trick!!!. Thanks again, Cyp. ----- ----- Original Message ---- From: samuel <samu60(a)gmail.com> To: Cyprian Clement <cyprian_clement(a)yahoo.co.uk> Cc: serusers(a)lists.iptel.org Sent: Thursday, 7 June, 2007 8:45:06 AM Subject: Re: [Serusers] SER's MySql Tables display mysql>DESC <tablename> so, in the mysql prompt, typing DESC user_preferences will return the table columns. Samuel 2007/6/7, Cyprian Clement < cyprian_clement(a)yahoo.co.uk>: Hi, With regard to the built in SER tables of the Mysql database, as most of them are empty(unless you insert rows) I would like to know first what columns are there already before I insert anything. Does anyone know what command I can use to display columns of the empty table(say "usr_preferences" empty table) ?. Thanks in advance. Cyp. --------- Yahoo! Answers - Get better answers from someone who knows. Try it now. _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers ___________________________________________________________ New Yahoo! Mail is the ultimate force in competitive emailing. Find out more at the Yahoo! Mail Championships. Plus: play games and win prizes. http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

1 0

[Users] Voice System/OpenSER @ VoN @ Stockholm
by Bogdan-Andrei Iancu 07 Jun '07

07 Jun '07

Hi, Voice System team will be exhibiting at VoN in Stockholm, between 11 and 14 June. We will be at booth A603. Persons interested in meeting us or having a chat about OpenSER, please send me an email. See: http://www.voice-system.ro/news::2007-von-spring-eu Also, during this event, an OpenSER session in VoN Theatre will take place Wednesday, June 13, 15:45 - 16:45. See: http://www.von.com/2007/springEurope_stockholm/html/confSchedule_gvsb117863… Regards, Bogdan

1 0

[Serusers] SER's MySql Tables display
by Cyprian Clement 07 Jun '07

07 Jun '07

Hi, With regard to the built in SER tables of the Mysql database, as most of them are empty(unless you insert rows) I would like to know first what columns are there already before I insert anything. Does anyone know what command I can use to display columns of the empty table(say "usr_preferences" empty table) ?. Thanks in advance. Cyp. --------- ___________________________________________________________ Yahoo! Mail is the world's favourite email. Don't settle for less, sign up for your free account today http://uk.rd.yahoo.com/evt=44106/*http://uk.docs.yahoo.com/mail/winter07.ht…

2 1

[Users] Altering the MySQL database of openser
by liran tal 07 Jun '07

07 Jun '07

Hey everyone, I was wondering about altering a little bit the mysql table 'trusted' for openser to add a column at the end which I will use as a description for the trusted server. Should it pose any problems in the way openser makes use of that table? I wouldn't want to break anything :) Sincerely, Liri.

2 1

[Users] strange behaviour from clients
by nick 07 Jun '07

07 Jun '07

I've got a new openser config I'm testing with a secondary server (1.1.1 on Centos5), but I'm having a few problems getting some clients, X-lite 3.0 and an ATA from draytek, who are unable to register with the server. Watching with ngrep on the server and wireshark locally I see the server and the client communicating, the client sends a register to the server, the server says 401 Unauthorized and generates a realm and nonce, but instead of going on with the next step in the register process (adding one to the Cseq and generating a nonce of its own) the client just doesn't seem to notice that the 401 was sent (could they possibly be expecting a 407?) they just keep trying with the first step in the process. Is this an error in my config (sending a 401 instead of something else) or a deficiency in the client ( I have a few grandstream phones which work perfectly)... Here's a few lines from the ngrep output... U X.X.X.30:5061 -> X.X.X.17:5061 REGISTER sip:logycs.it SIP/2.0. Via: SIP/2.0/UDP X.X.X.30:5061;branch=z9hG4bK-Rgr-15494;rport. From: Test User <sip:testuser@logycs.it>;tag=dio-18539. To: <sip:testuser@logycs.it>. Call-ID: lpB-27408(a)X.X.X.30. CSeq: 100 REGISTER. Contact: <sip:testuser@X.X.X.30:5061>. Max-Forwards: 70. Expires: 600. User-Agent: DrayTek UA-1.2.1 Vigor2100V series. Content-Length: 0. . # U X.X.X.17:5061 -> X.X.X.30:5061 SIP/2.0 100 Trying. Via: SIP/2.0/UDP X.X.X.30:5061;branch=z9hG4bK-Rgr-15494;rport=5061. From: Test User <sip:testuser@logycs.it>;tag=dio-18539. To: <sip:testuser@logycs.it>. Call-ID: lpB-27408(a)X.X.X.30. CSeq: 100 REGISTER. Mobilia SIP Server. Content-Length: 0. Warning: 392 X.X.X.17:5061 "Noisy feedback tells: pid=11509 req_src_ip=X.X.X.30 req_src_port=5061 in_uri=sip:logycs.it out_uri=sip:logycs.it via_cnt==1". . # U X.X.X.17:5061 -> X.X.X.30:5061 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP X.X.X.30:5061;branch=z9hG4bK-Rgr-15494;rport=5061. From: Test User <sip:testuser@logycs.it>;tag=dio-18539. To: <sip:testuser@logycs.it>;tag=e39f848b5629fc672733e67aefa3e192.f4af. Call-ID: lpB-27408(a)X.X.X.30. CSeq: 100 REGISTER. WWW-Authenticate: Digest realm="logycs.it", nonce="4666de896a20a47ce567604e015d96a9f7b93027". Mobilia SIP Server. Content-Length: 0. Warning: 392 X.X.X.17:5061 "Noisy feedback tells: pid=11509 req_src_ip=X.X.X.30 req_src_port=5061 in_uri=sip:logycs.it out_uri=sip:logycs.it via_cnt==1". The ATA is .30 and has a public IP, as does the Server (.17) I personally can't see any errors in terms of where the replies are being sent, but I may be overlooking something quite obvious. The useful parts of my openser.cfg (I have use domain as 1 in auth, auth_db, etc, but the registration isn't even getting that far yet). listen = udp:X.X.X.17:5061 mpath = "/usr/lib/openser/modules" alias = siptest.logycs.it children = 8 debug = 6 fork = yes disable_tcp = no log_facility = LOG_LOCAL6 log_stderror = no tcp_children = 4 mhomed = no server_header = "Mobilia SIP Server" server_signature = yes sock_mode = 0600 user_agent_header = "Mobilia SIP Server" reply_to_via = no sip_warning = yes check_via = yes dns = no rev_dns = no syn_branch = yes disable_core_dump = yes dns_try_ipv6 = no dns_use_search_list = yes route[0] { xlog("L_INFO", "New request - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); force_rport(); if(msg:len > max_len) { xlog("L_INFO", "Message too big - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("513", "Message Too Big"); exit; } if (!mf_process_maxfwd_header("10")) { xlog("L_INFO", "Too many hops - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("483", "Too Many Hops"); exit; } if(!is_method("REGISTER")) { if(nat_uac_test("3")) { record_route(";nat=yes"); } else { record_route(); } } if(loose_route()) { if(!has_totag()) { xlog("L_INFO", "Initial loose-routing rejected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Initial Loose-Routing Rejected"); exit; } if(nat_uac_test("19") || search("^Route:.*;nat=yes")) { fix_nated_contact(); if(!search("^Content-Length:[ ]*0")) { fix_nated_sdp("3"); setflag(6); } } if(is_method("BYE")) { setflag(24); # account failed transactions setflag(25); # account successful transactions } # mark as loose-routed for acc setflag(26); route(1); } if(is_method("REGISTER")) { route(2); } setflag(24); # account failed transactions setflag(25); # account successful transactions if(is_method("INVITE")) { route(3); } if(is_method("CANCEL") || is_method("ACK")) { route(4); } route(5); } route[2] { sl_send_reply("100", "Trying"); if(!www_authorize("", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; }

3 4

[Users] Re: Restricting number of concurrent calls in openser?
by Axel Dahl 07 Jun '07

07 Jun '07

Has anyone managed to restrict the number of concurrent calls on an openser box? I'm using openser 1.1.1 and found on the web that this was needed. I've included the dialog.so and avpops.so modules. if ( avp_check("$DLG_count", "gt/i:10") ) { sl_send_reply("403","no more calls accepted"); exit; } I'm not sure if I've configured the dialog.so module correctly, the documentation tells you what each function does, but not what the parameters mean (for example the documentation says dlg_flg default value is "none" and they give an example of it set to 4 - but what do these values mean?) Has anyone got this working or does anyone know how I should be configuring the dialog.so module? Thanks, -Axel

2 3

Re: [Serusers] problems with ser.cfg
by Jai Rangi 06 Jun '07

06 Jun '07

Neil Send you this, http://www.ittvis.com/services/techtip.asp?ttid=3092 A very quick search on Google shows you this is likely a problem with the SELinux stuff. Check if SELinux is enabled, you can check it /etc/selinux/config There you can disable SElinux, and reboot your system -Jai On 6/6/07, Kirk McCalla <kirk.mccalla(a)gmail.com> wrote: > > Jai I do see the module however I still get the same error what can I do > next > > > > [root@localhost /]# ls -l /usr/lib/ser/modules/mysql.so > -rwxr-xr-x 1 root root 32948 Aug 26 2005 /usr/lib/ser/modules/mysql.so > [root@localhost /]# > > > Get this error > > Starting ser: 0(13787) ERROR: load_module: could not open module > </usr/lib/ser/modules/mysql.so>: /usr/lib/libmysqlclient.so.14: cannot > restore segment prot after reloc: Permission denied > 0(13787) parse error (17,13-14): failed to load module > ERROR: bad config file (1 errors) > [FAILED] > [root@localhost /]# > > > > On 6/6/07, Jai Rangi <jprangi(a)gmail.com> wrote: > > > > Can you do > > ls -l /usr/lib/ser/modules/mysql.so > > > > Just to make sure is the module is build properly. > > Also while compiling ser did you include modules > > make all include_modules="mysql auth_radius etc.... " > > > > Hope this will help.. > > -Jai Rangi > > > > > > On 6/6/07, Kirk McCalla < kirk.mccalla(a)gmail.com> wrote: > > > > > Hello I am new to ser. I just loaded my ser and mysql and they are > > > up and running. > > > I am using CENTOS for my operating system. > > > > > > > > > I am trying to configure the ser.cfg file and I keep getting this > > > error. > > > > > > ERROR: load_module: could not open module > > > </usr/lib/ser/modules/mysql.so>: /usr/lib/libmysqlclient.so.14: cannot > > > restore segment prot after reloc: Permission denied > > > > > > > > > Now I have libmysqlclient.so.14 loaded and mysql.so is also loaded > > > > > > [root@localhost lib]# find libmysqlclient.so.14 > > > libmysqlclient.so.14 > > > [root@localhost lib]# > > > > > > I cant seee where I could be going wrong here. > > > I load just fine when I dont have the loadmodule > > > "/usr/lib/ser/modules/mysql.so" uncomented. > > > > > > This is my config file > > > > > > > > > > > > # $Id: auth-mysql.cfg 46 2006-01-25 04:21:30Z /CN=Paul > > > Hazlett/emailAddress=paul(a)onsip.org $ > > > debug=3 > > > fork=no > > > log_stderror=yes > > > > > > sten=192.168.0.102 # put your server IP address here > > > port=5060 > > > children=4 > > > > > > dns=no > > > rev_dns=no > > > fifo="/tmp/ser_fifo" > > > fifo_db_url="mysql://ser:heslo@localhost/ser" > > > > > > loadmodule "/usr/lib/ser/modules/mysql.so" > > > loadmodule "/usr/lib/ser/modules/sl.so" > > > loadmodule "/usr/lib/ser/modules/tm.so" > > > loadmodule "/usr/lib/ser/modules/rr.so" > > > loadmodule "/usr/lib/ser/modules/maxfwd.so" > > > loadmodule "/usr/lib/ser/modules/usrloc.so" > > > loadmodule "/usr/lib/ser/modules/registrar.so" > > > loadmodule "/usr/lib/ser/modules/uri_db.so" > > > loadmodule "/usr/lib/ser/modules/auth.so" > > > loadmodule "/usr/lib/ser/modules/auth_db.so" > > > > > > modparam("auth_db|uri_db|usrloc", "db_url", " > > > mysql://ser:heslo@localhost/ser") > > > modparam("auth_db", "calculate_ha1", 1) > > > modparam("auth_db", "password_column", "password") > > > modparam("usrloc", "db_mode", 2) > > > modparam("rr", "enable_full_lr", 1) > > > > > > route { > > > > > > # > > > ----------------------------------------------------------------- > > > # Sanity Check Section > > > # > > > ----------------------------------------------------------------- > > > if (!mf_process_maxfwd_header("10")) { > > > sl_send_reply("483", "Too Many Hops"); > > > break; > > > }; > > > > > > if (msg:len > max_len) { > > > sl_send_reply("513", "Message Overflow"); > > > break; > > > }; > > > > > > # > > > ----------------------------------------------------------------- > > > # Record Route Section > > > # > > > ----------------------------------------------------------------- > > > if (method!="REGISTER") { > > > record_route(); > > > }; > > > > > > # > > > ----------------------------------------------------------------- > > > # Loose Route Section > > > # > > > ----------------------------------------------------------------- > > > if (loose_route()) { > > > route(1); > > > break; > > > }; > > > > > > # > > > ----------------------------------------------------------------- > > > # Call Type Processing Section > > > # > > > ----------------------------------------------------------------- > > > if (uri!=myself) { > > > route(1); > > > break; > > > }; > > > > > > if (method=="ACK") { > > > route(1); > > > break; > > > } else if (method=="INVITE") { > > > route(3); > > > break; > > > } else if (method=="REGISTER") { > > > route(2); > > > break; > > > }; > > > > > > lookup("aliases"); > > > if (uri!=myself) { > > > route(1); > > > break; > > > }; > > > > > > if (!lookup("location")) { > > > sl_send_reply("404", "User Not Found"); > > > break; > > > }; > > > > > > route(1); > > > } > > > > > > route[1] { > > > > > > # > > > ----------------------------------------------------------------- > > > # Default Message Handler > > > # > > > ----------------------------------------------------------------- > > > if (!t_relay()) { > > > sl_reply_error(); > > > }; > > > } > > > > > > route[2] { > > > > > > # > > > ----------------------------------------------------------------- > > > # REGISTER Message Handler > > > # > > > ---------------------------------------------------------------- > > > sl_send_reply("100", "Trying"); > > > > > > if (!www_authorize("","subscriber")) { > > > www_challenge("","0"); > > > break; > > > }; > > > > > > if (!check_to()) { > > > sl_send_reply("401", "Unauthorized"); > > > break; > > > }; > > > > > > consume_credentials(); > > > > > > if (!save("location")) { > > > sl_reply_error(); > > > }; > > > } > > > > > > route[3] { > > > # > > > ----------------------------------------------------------------- > > > # INVITE Message Handler > > > # > > > ----------------------------------------------------------------- > > > if (!proxy_authorize("","subscriber")) { > > > proxy_challenge("","0"); > > > break; > > > } else if (!check_from()) { > > > sl_send_reply("403", "Use From=ID"); > > > break; > > > }; > > > > > > consume_credentials(); > > > > > > lookup("aliases"); > > > if (uri!=myself) { > > > route(1); > > > break; > > > }; > > > > > > if (!lookup("location")) { > > > sl_send_reply("404", "User Not Found"); > > > break; > > > }; > > > > > > route(1); > > > } > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > >

2 1

[Users] openser and rtpproxy on multihomed host
by Alexander Bergolth 06 Jun '07

06 Jun '07

Hi! I'm experiencing problems using openser and rtpproxy on a multihomed box (IP addresses are 137.208.89.45 and 137.208.89.65). The client (firewalled) contacts the server via the first IP address (137.208.89.45) but rtpproxy sometimes uses it's second IP (137.208.89.65) in the "c=" SDP-information. (See below.) However it _sends_ RTP packets from the _first_ IP address. Those packets will never pass through the firewall, of course, since the clients outgoing RTP traffic is sent to another IP address than the incoming traffic is hitting the firewall from. Is there a way to tell rtpproxy to use the same IP-address both for the c= SDP header and as source address? -------------------- 8< -------------------- ## T 2007/06/05 15:57:36.041537 137.208.89.45:5060 -> 137.208.90.164:3099 [AP] SIP/2.0 183 Session Progress. Via: SIP/2.0/TCP 137.208.90.164:56136;branch=z9hG4bK-d87543-a107a77a6311422d-1--d87543-;rport=3099. From: "Alexander Bergolth"<sip:30001@wu-wien.ac.at>;tag=5b6d7b31. To: "996050"<sip:996050@wu-wien.ac.at>;tag=as2e40807f. Call-ID: MTVjYzlhMDdjMjAwODExZDEyNzk5M2IwN2UxNjhlYTc.. CSeq: 2 INVITE. User-Agent: Asterisk PBX. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY. Supported: replaces. Contact: <sip:996050@137.208.89.135>. Content-Type: application/sdp. Content-Length: 283. . v=0. o=root 6978 6978 IN IP4 137.208.89.135. s=session. c=IN IP4 137.208.89.65. t=0 0. m=audio 35064 RTP/AVP 0 8 101. a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=silenceSupp:off - - - -. a=ptime:20. a=sendrecv. a=nortpproxy:yes. -------------------- 8< -------------------- -------------------- 8< -------------------- 15:57:35.814136 IP 137.208.90.164.3099 > 137.208.89.45.5060: P 4236850032:4236851080(1048) ack 224540451 win 64256 15:57:35.814147 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 1048 win 2003 15:57:35.814351 IP 137.208.89.45.5060 > 137.208.90.164.3099: P 1:550(549) ack 1048 win 2003 15:57:35.814430 IP 137.208.89.45.5060 > 137.208.90.164.3099: P 550:1264(714) ack 1048 win 2003 15:57:35.814850 IP 137.208.90.164.3099 > 137.208.89.45.5060: . ack 1264 win 64177 15:57:35.915829 IP 137.208.90.164.3099 > 137.208.89.45.5060: P 1048:1418(370) ack 1264 win 64177 15:57:35.955948 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 1418 win 2003 15:57:36.017309 IP 137.208.90.164.3099 > 137.208.89.45.5060: P 1418:2672(1254) ack 1264 win 64177 15:57:36.017320 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 2672 win 2003 15:57:36.017397 IP 137.208.89.45.5060 > 137.208.90.164.3099: P 1264:1813(549) ack 2672 win 2003 15:57:36.018604 IP 137.208.89.45.5060 > 137.208.90.164.3099: P 1813:2388(575) ack 2672 win 2003 15:57:36.019170 IP 137.208.90.164.3099 > 137.208.89.45.5060: . ack 2388 win 64256 15:57:36.041454 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, length 172 15:57:36.041537 IP 137.208.89.45.5060 > 137.208.90.164.3099: P 2388:3200(812) ack 2672 win 2003 15:57:36.046899 IP 137.208.90.164.10677 > 137.208.89.65.35065: UDP, length 132 15:57:36.061155 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, length 172 15:57:36.080128 IP 137.208.90.164.10676 > 137.208.89.65.35064: UDP, length 172 15:57:36.081157 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, length 172 [...] -------------------- 8< -------------------- Thanks in advance, --leo P.S.: I'm using openser-1.2 and rtpproxy-cvs20070222. -- e-mail ::: Alexander.Bergolth (at) wu-wien.ac.at fax ::: +43-1-31336-906050 location ::: Computer Center | Vienna University of Economics | Austria

4 4

[Serusers] help needed!
by Mukesh Prajapati 06 Jun '07

06 Jun '07

Hi all I wanted to know that which soft phone will work with SER. waiting for reply Thanks Mukesh --------------------------------- Need a vacation? Get great deals to amazing places on Yahoo! Travel.

4 5

[Users] DNS SRV Setting for the OpenSER proxies
by raviprakash sunkara 06 Jun '07

06 Jun '07

Hello Users, I'm tring to configuring the load balance , Initial i have 2 sip proxies and centralized database. for 2 sip proxies database is common , ie. centralized. Let Assume the proxy1 is a.b.c.b , other proxy2 is 1.2.3.4 and proxy domain name is sip.sample.com , is common if the proxy1 is not started or some failure case , it has goes to the second proxy2.. but this is not happening at all. i follow this url for DNS_setting -- > http://www.voip-info.org/wiki/view/DNS+SRV all the request going to proxy1 only. but not the proxy2.... please any can guide me regarding this... -- Thanks &Regards Ravi Prakash Sunkara

2 1

[Users] Mediaproxy Selection for Inbound DID calls
by Mike O'Connor 06 Jun '07

06 Jun '07

Hi All I would like to be able to have a difference Mediaproxy group selected per user account on inbound DID calls. Our termination provider sends the calls to our openSER with a URI of something <number>@<IP_address>. '08723451234(a)202.xxx.xxx.xxx', we use the alias_db_lookup("dbaliases") function to resolve the phone number to a user account on the DID calls. I would think that some type of rewrite of the '@202.xxx.xxx.xxx' would need to be done but I'm sure this would cause other issues. Any ideas would be great :) Thanks Mike

2 2

[Users] Question about Processes and their priorities in OpenSER
by Ian Fedeli 06 Jun '07

06 Jun '07

Hello, I am working on trying to stress OpenSER using a benchmarking utility. I have three questions: 1) I was hoping someone here could tell me how many 'openser' processes I should expect, and what their functions are. For example, I would expect there would be one process for each child, but I find that there are more processes than children as configured in openser.cfg. I have it set to 32 children in openser.cfg, and yet I find that there are 36 processes. The only non-standard module I have configured openSER to use is the mySQL module. I have attached the output of ps auwx | grep openser below. 2) When I observe the benchmark as it is running (see below), I notice one process that seems to have a lower priority, yet take up more CPU time than the rest. Is this process special (this relates to question 1)? 3) Why is only one processor (Cpu2 in the example below) saturated? The server is running on a machine with 2 dual-core processors, for a total of 4 CPUs. I am reasonably sure my benchmark is not network limited, as the server and the client-benchmark machine are connected via 2 Gigabit NICs. I have also discovered that if I renice the process mentioned in question 2 to -20, all 4 processors become saturated, and the throughput of the server more than doubles. The output from top is below. Any insight is greatly appreciated. Thanks, --Ian Fedeli #ps auxw | grep openser root 27038 0.0 0.0 2150456 4536 ? S 10:20 0:00 /usr/local/sbin/openser -E -m 2048 root 27039 1.3 7.4 2150456 609804 ? S 10:20 0:03 /usr/local/sbin/openser -E -m 2048 root 27040 3.7 7.6 2150456 624188 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27041 3.6 7.6 2150456 625852 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27042 3.6 7.5 2150456 614116 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27043 3.6 7.5 2150456 619564 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27044 0.0 0.0 2150460 1020 ? S 10:20 0:00 /usr/local/sbin/openser -E -m 2048 root 27045 3.6 7.5 2150456 615800 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27046 3.8 7.5 2150456 621144 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27047 3.8 7.6 2150456 623408 ? S 10:20 0:10 /usr/local/sbin/openser -E -m 2048 root 27048 3.7 7.6 2150456 627172 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27050 3.8 7.6 2150456 627780 ? R 10:20 0:10 /usr/local/sbin/openser -E -m 2048 root 27051 3.6 7.6 2150456 624980 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27054 3.7 7.6 2150456 622324 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27056 3.8 7.6 2150456 623992 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27058 3.8 7.5 2150456 616816 ? S 10:20 0:10 /usr/local/sbin/openser -E -m 2048 root 27060 3.5 7.5 2150456 620464 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27062 3.6 7.5 2150456 614324 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27064 3.5 7.4 2150456 611200 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27065 3.7 7.5 2150456 616132 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27067 3.5 7.5 2150456 617480 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27070 3.6 7.5 2150456 618024 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27071 3.6 7.5 2150456 619008 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27073 3.7 7.5 2150456 619724 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27076 3.6 7.5 2150456 617448 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27077 3.7 7.6 2150456 624320 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27080 3.6 7.5 2150456 619576 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27081 3.6 7.5 2150456 615472 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27082 3.8 7.5 2150456 615396 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27086 3.7 7.6 2150456 621484 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27088 3.7 7.5 2150456 617260 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27090 3.6 7.5 2150456 616068 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27092 3.6 7.4 2150456 609980 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27093 3.6 7.5 2150456 616160 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27094 3.6 7.4 2150456 610928 ? S 10:20 0:09 /usr/local/sbin/openser -E -m 2048 root 27098 21.8 1.9 2150456 159300 ? R 10:20 0:56 /usr/local/sbin/openser -E -m 2048 #top (before renicing) Tasks: 109 total, 15 running, 94 sleeping, 0 stopped, 0 zombie Cpu0 : 23.0%us, 16.0%sy, 0.0%ni, 34.0%id, 0.0%wa, 3.0%hi, 24.0%si, 0.0%st Cpu1 : 26.7%us, 20.8%sy, 0.0%ni, 50.5%id, 0.0%wa, 0.0%hi, 2.0%si, 0.0%st Cpu2 : 44.6%us, 53.5%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 2.0%si, 0.0%st Cpu3 : 25.7%us, 21.8%sy, 0.0%ni, 52.5%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 8175948k total, 1108488k used, 7067460k free, 74800k buffers Swap: 3301316k total, 0k used, 3301316k free, 888692k cached PID USER PPID PR VIRT RES SHR S %CPU P %MEM TIME+ COMMAND 10065 root 10006 25 2100m 12m 11m R 28 2 0.2 0:10.65 openser 10013 root 10006 15 2100m 522m 522m R 13 2 6.5 0:03.03 openser 10010 root 10006 15 2100m 525m 524m R 11 2 6.6 0:03.21 openser 10057 root 10006 15 2100m 432m 431m S 9 0 5.4 0:02.65 openser 10063 root 10006 15 2100m 487m 486m S 9 0 6.1 0:02.83 openser 10011 root 10006 15 2100m 510m 509m R 8 1 6.4 0:03.23 openser 10012 root 10006 15 2100m 511m 510m S 8 3 6.4 0:02.97 openser 10017 root 10006 15 2100m 481m 480m R 8 2 6.0 0:02.80 openser 10021 root 10006 15 2100m 487m 486m S 8 2 6.1 0:03.01 openser 10024 root 10006 15 2100m 484m 484m S 8 0 6.1 0:02.92 openser 10029 root 10006 15 2100m 492m 491m S 8 3 6.2 0:02.65 openser 10033 root 10006 15 2100m 501m 501m S 8 3 6.3 0:03.00 openser 10036 root 10006 15 2100m 476m 475m S 8 3 6.0 0:02.81 openser 10038 root 10006 15 2100m 488m 488m S 8 3 6.1 0:02.88 openser 10048 root 10006 15 2100m 463m 462m R 8 1 5.8 0:02.66 openser #top (after renicing) Tasks: 109 total, 32 running, 77 sleeping, 0 stopped, 0 zombie Cpu0 : 42.9%us, 24.5%sy, 0.0%ni, 0.0%id, 0.0%wa, 6.1%hi, 26.5%si, 0.0%st Cpu1 : 52.0%us, 44.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Cpu2 : 51.0%us, 47.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 2.0%si, 0.0%st Cpu3 : 46.0%us, 50.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Mem: 8175948k total, 1262084k used, 6913864k free, 74808k buffers Swap: 3301316k total, 0k used, 3301316k free, 1032116k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ PPID COMMAND 10317 root 0 -20 2100m 12m 12m S 54 0.2 0:10.84 10258 openser 10279 root 16 0 2100m 490m 489m R 18 6.1 0:02.88 10258 openser 10264 root 16 0 2100m 473m 472m R 14 5.9 0:02.54 10258 openser 10265 root 16 0 2100m 464m 463m R 14 5.8 0:02.73 10258 openser 10266 root 16 0 2100m 481m 480m R 14 6.0 0:02.55 10258 openser 10271 root 16 0 2100m 463m 462m R 14 5.8 0:02.57 10258 openser 10286 root 16 0 2100m 470m 470m R 14 5.9 0:02.41 10258 openser 10304 root 15 0 2100m 434m 433m S 14 5.4 0:02.53 10258 openser 10305 root 16 0 2100m 456m 455m R 14 5.7 0:02.37 10258 openser 10307 root 16 0 2100m 387m 386m R 14 4.8 0:02.22 10258 openser 10262 root 15 0 2100m 476m 475m S 12 6.0 0:02.88 10258 openser 10267 root 15 0 2100m 438m 437m R 12 5.5 0:02.50 10258 openser 10288 root 16 0 2100m 443m 442m R 12 5.6 0:02.33 10258 openser 10289 root 16 0 2100m 458m 457m R 12 5.7 0:02.52 10258 openser

4 5

[Users] Question about forking
by Andreas Sikkema 06 Jun '07

06 Jun '07

Hi, I have SIP UA's register to my OpenSER server and they can call each other. This has been working for some time now without any real issues and I'm very happy. Now I want to be able to have 1 destination be available on 2 SIP UA's. What I think the best way to do is the following: - create two accounts - make the detination point to one UA A and create an "alias" for the destination at UA B (for instance by prefixing A) - On an incoming call detect that there is the possibility to reach the destination at A and B - Fork the incoming call to A and B so that when one arm of the fork accepts the call (by going to ringing, or immediately answering, etc). My questions are: - How do I check if I can start a fork? - How do I fork and have both arms follow the logic I am currently using? -- Andreas Sikkema

2 1

[Users] openser CPL-C
by Helmut Kuper 06 Jun '07

06 Jun '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I played around with CPL-C Module. I loaded this CPL successfully via MI-FIFO-Module into database: <?xml version="1.0" encoding="UTF-8"?> <cpl> <outgoing> <address-switch field="destination" subfield="user"> <address is="v111"> <reject status="603" reason="fhhhghh"/> </address> </address-switch> </outgoing> </cpl> When a call is placed, the script above is executed and throws an error: 0(8741) DEBUG:cpl-c:get_orig_user: trying to get user from From 0(8741) DEBUG:get_user_script: fetching script for user <v101> 0(8741) DEBUG:get_user_script: we got the script len=62 0(8741) DEBUG:cpl_run_script: processing CPL node 0(8741) DEBUG:cpl_run_script: processing address-switch node 0(8741) DEBUG:run_address_switch: testing ADDRESS branch attr_name=0 attr_val=[v111](4).. 0(8741) DEBUG:run_address_switch: extracted uri is <sip:v111@domain> 0(8741) DEBUG:run_address_switch: extracted val. is <v111> 0(8741) DEBUG:run_address_switch: matching on ADDRESS node (IS) 0(8741) DEBUG:cpl_run_script: processing reject node 0(8741) ERROR:cpl_c:cpl_run.c:553: attribute is an empty string 0(8741) ERROR:cpl_c:cpl_run_script: script error When I change that reject line to this: <reject status="reject"/> then it works fine. Obviously openser (1.2.0) has some problems with parsing reject's reason attribute ... Is there a fix around or did I do a mistake somewhere? regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGZWYh4tZeNddg3dwRAiY/AJ4zN6oG56eUf9Lk4CRsTmqOwuqAVACfYE7+ zDbMXvqazKign05L7lzbZeE= =gB85 -----END PGP SIGNATURE-----

2 2

[Users] snmpstats modules and net-snmp5.4
by zhaojunjie01＠st.lzu.edu.cn 06 Jun '07

06 Jun '07

Hello,every one I configure snmpstats modules in openser1.2.0 and the net-snmp version is 5.4.But when I¡¡use openser -c command its result as follows: ERROR: load_module: could not open module </usr/local/lib64/openser/modules/snmpstats.so>: /usr/local/lib64/openser/modules/snmpstats.so: undefined symbol: real_init_smux Who can give me some suggestion? Thank you very much.

2 1

[Serusers] Acc Module Inizialization
by Riccardo Cupardo 06 Jun '07

06 Jun '07

2 2

[Users] application via voip?
by Matthew Pease 06 Jun '07

06 Jun '07

Hi all - Not really sure where to post this question as I am just starting to research this issue. We'd like an all VOIP solution where we have a telephone number that terminates at our server. At our server, we'd like to: 1. get their phone number via caller ID. look up data with the caller id. 2. generate a wave file based on the data returned & play it to the user over the established voip link. How is this done? Totally new to the game here. I've read about DID origination, SIP channels, SIP peers... its all quite confusing! I'm a java developer, so something that works via Java would be great, but scripting in various languages is no big deal. The application doesn't need to do much more than query a database & choose a WAV file to play back based on that info. Thank you-- Matt Pease ParkingHero, Inc.

4 5

Re: [Users] openser and rtpproxy on multihomed host
by Alexander 'Leo' Bergolth 05 Jun '07

05 Jun '07

On 06/05/2007 05:17 PM, raviprakash sunkara wrote: > Hi Alexander > Can use fix_nated_sdp("flag"); and also force_rtp_proxy("flags"); I'm already using force_rtp_proxy() (without arguments) and it already rewrites the "c=" address in the sdp information but it uses the wrong interface address. (The openser-server/rtpproxy has two IP adresses in the same subnet.) Since I know the address which is used by the clients or contacting the server, I could hardcode the address as the second parameter to force_rtp_proxy to force the use of this address but I was looking for a cleaner solution. I'd like to use the address where the SIP request came in for both RTP streams. Maybe I can use the pseudo-variable $Ri (Received IP address) as the second parameter to force_rtp_proxy? This should force the use of the correct IP address in the "c=" field and will hopefully persuade the client to use this IP address as the destination address for its RTP data. But how do I tell rtpproxy to send its RTP data from this address? Thanks, --leo > On 6/5/07, Alexander Bergolth <leo(a)strike.wu-wien.ac.at> wrote: >> >> Hi! >> >> I'm experiencing problems using openser and rtpproxy on a multihomed box >> (IP addresses are 137.208.89.45 and 137.208.89.65). >> >> The client (firewalled) contacts the server via the first IP address >> (137.208.89.45) but rtpproxy sometimes uses it's second IP >> (137.208.89.65) in the "c=" SDP-information. (See below.) >> However it _sends_ RTP packets from the _first_ IP address. Those >> packets will never pass through the firewall, of course, since the >> clients outgoing RTP traffic is sent to another IP address than the >> incoming traffic is hitting the firewall from. >> >> Is there a way to tell rtpproxy to use the same IP-address both for the >> c= SDP header and as source address? >> >> -------------------- 8< -------------------- >> ## >> T 2007/06/05 15:57:36.041537 137.208.89.45:5060 -> >> 137.208.90.164:3099[AP] >> SIP/2.0 183 Session Progress. >> Via: SIP/2.0/TCP >> 137.208.90.164:56136 >> ;branch=z9hG4bK-d87543-a107a77a6311422d-1--d87543-;rport=3099. >> From: "Alexander Bergolth"<sip:30001@wu-wien.ac.at>;tag=5b6d7b31. >> To: "996050"<sip:996050@wu-wien.ac.at>;tag=as2e40807f. >> Call-ID: MTVjYzlhMDdjMjAwODExZDEyNzk5M2IwN2UxNjhlYTc.. >> CSeq: 2 INVITE. >> User-Agent: Asterisk PBX. >> Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY. >> Supported: replaces. >> Contact: <sip:996050@137.208.89.135>. >> Content-Type: application/sdp. >> Content-Length: 283. >> . >> v=0. >> o=root 6978 6978 IN IP4 137.208.89.135. >> s=session. >> c=IN IP4 137.208.89.65. >> t=0 0. >> m=audio 35064 RTP/AVP 0 8 101. >> a=rtpmap:0 PCMU/8000. >> a=rtpmap:8 PCMA/8000. >> a=rtpmap:101 telephone-event/8000. >> a=fmtp:101 0-16. >> a=silenceSupp:off - - - -. >> a=ptime:20. >> a=sendrecv. >> a=nortpproxy:yes. >> -------------------- 8< -------------------- >> >> -------------------- 8< -------------------- >> 15:57:35.814136 IP 137.208.90.164.3099 > 137.208.89.45.5060: P >> 4236850032:4236851080(1048) ack 224540451 win 64256 >> 15:57:35.814147 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 1048 >> win 2003 >> 15:57:35.814351 IP 137.208.89.45.5060 > 137.208.90.164.3099: P >> 1:550(549) ack 1048 win 2003 >> 15:57:35.814430 IP 137.208.89.45.5060 > 137.208.90.164.3099: P >> 550:1264(714) ack 1048 win 2003 >> 15:57:35.814850 IP 137.208.90.164.3099 > 137.208.89.45.5060: . ack 1264 >> win 64177 >> 15:57:35.915829 IP 137.208.90.164.3099 > 137.208.89.45.5060: P >> 1048:1418(370) ack 1264 win 64177 >> 15:57:35.955948 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 1418 >> win 2003 >> 15:57:36.017309 IP 137.208.90.164.3099 > 137.208.89.45.5060: P >> 1418:2672(1254) ack 1264 win 64177 >> 15:57:36.017320 IP 137.208.89.45.5060 > 137.208.90.164.3099: . ack 2672 >> win 2003 >> 15:57:36.017397 IP 137.208.89.45.5060 > 137.208.90.164.3099: P >> 1264:1813(549) ack 2672 win 2003 >> 15:57:36.018604 IP 137.208.89.45.5060 > 137.208.90.164.3099: P >> 1813:2388(575) ack 2672 win 2003 >> 15:57:36.019170 IP 137.208.90.164.3099 > 137.208.89.45.5060: . ack 2388 >> win 64256 >> 15:57:36.041454 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, >> length 172 >> 15:57:36.041537 IP 137.208.89.45.5060 > 137.208.90.164.3099: P >> 2388:3200(812) ack 2672 win 2003 >> 15:57:36.046899 IP 137.208.90.164.10677 > 137.208.89.65.35065: UDP, >> length 132 >> 15:57:36.061155 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, >> length 172 >> 15:57:36.080128 IP 137.208.90.164.10676 > 137.208.89.65.35064: UDP, >> length 172 >> 15:57:36.081157 IP 137.208.89.45.35064 > 137.208.90.164.10676: UDP, >> length 172 >> [...] >> -------------------- 8< -------------------- >> >> Thanks in advance, >> --leo >> >> P.S.: I'm using openser-1.2 and rtpproxy-cvs20070222. >> >> -- >> e-mail ::: Alexander.Bergolth (at) wu-wien.ac.at >> fax ::: +43-1-31336-906050 >> location ::: Computer Center | Vienna University of Economics | Austria >> >> >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> > > > -- e-mail ::: Alexander.Bergolth (at) wu-wien.ac.at fax ::: +43-1-31336-906050 location ::: Computer Center | Vienna University of Economics | Austria

1 0

[Serusers] SER Error
by Rjey Nomer 05 Jun '07

05 Jun '07

Hi, Can anyone help me with my problem. I configure SER and Asterisk on different machine. Objective are calling SER Client ---> Asterisk Client and Asterisk Client ---> SER client. Problem is when I call SER client using my Asterisk client it can successfully ring the ser client but when I pickup the phone, it doesn't have any voice. Error occured on my messages log. ======================== Jun 5 23:47:14 ser ser[7263]: Warning: sl_send_reply: I won't send a reply for ACK!! Jun 5 23:47:14 ser ser[7263]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) Jun 5 23:47:14 ser ser[7266]: ERROR: mk_proxy: could not resolve hostname: "@192.168.1.41" Jun 5 23:47:14 ser ser[7266]: ERROR: uri2proxy: bad host name in URI <sip:@192.168.1.41;ftag=as3add8ffb;lr=on> Jun 5 23:47:14 ser ser[7266]: ERROR: t_forward_nonack: failure to add branches ======================== Thanks in advanced! Regards, Rjey ____________________________________________________________________________________ Get the free Yahoo! toolbar and rest assured with the added security of spyware protection. http://new.toolbar.yahoo.com/toolbar/features/norton/index.php

2 1

[Users] New sip:wizard features
by Andreas Granig 05 Jun '07

05 Jun '07

All, I want to announce a bunch of new features for sip:wizard, the OpenSER configuration generator. Beside some improvements, the focus for this round was on conditional call forwarding. For a detailed description, see: http://www.sipwise.com/news To try them out, visit: http://www.sipwise.com/wizard Best regards, Andreas

1 0

[Users] avp_check in OpenSER 1.1
by Carsten Bock 05 Jun '07

05 Jun '07

Hi Everybody, I have a question regarding avp_check() and reverse-DNS-Lookups: I wanted to do the following in the routing logic (simplified): loose_route(); if (avp_check("$dd","re/192\.168.123.(1|2)/g")) { The idea was to allow flexible re-routing to another proxy in case of loose-routing. One proxy would be the alias of the other, and so far, everything was fine. What happened now: We had a customer, who's IP could not be "reverse-lookuped" properly, the DNS-Server ran into an timeout. After we removed the code-snipplet from the routing, everything was fine (again); except this functionality drawback. I believe, in OpenSER 1.2 i could replace it with the following, to avoid the reverse-lookups: if (($dd == 192.168.123.1) || ($dd == 192.168.123.2)) { Am i right? Would this work? Can i somehow avoid the reverse-lookup in OpenSER 1.1? Thank you everybody, Carsten

2 1

[Users] 200-OK and sendto() problem
by Andreas Granig 05 Jun '07

05 Jun '07

Hi, I'm going crazy with this problem, so maybe anyone here can see any error or can give a hint how to debug this. I've two clients behind (the same) NAT. INVITE goes thru, so does 100 and 180. But the 200 isn't relayed because of the following syslog error: ./sbin/openser[23933]: ERROR: udp_send: sendto(sock,0x81816a8,814,0,0xb5b7f168,16): Operation not permitted(1) ./sbin/openser[23933]: msg_send: ERROR: udp_send failed I can't find any error (the two Via headers are exactly the same), so here is the 180 which is relayed without problems, and below the 200, which causes the error: SIP/2.0 180 Ringing Via: SIP/2.0/UDP 84.19.176.11;branch=z9hG4bK6351.1b30ad43.0 Via: SIP/2.0/UDP 192.168.123.100:2083;received=83.65.24.161;branch=z9hG4bK-kq6qyyeowiei;rport=12499 From: "Foo Bar" <sip:foo1000@linguin.org>;tag=xuu6a2tp6b To: <sip:2000@linguin.org;user=phone>;tag=2091138726 Call-ID: 3c27e5729c40-csdi3p954zyn@snom360-0004132306CE CSeq: 2 INVITE Server: Cisco ATA 186 v3.1.1 atasip (040629A) Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER Content-Length: 0 SIP/2.0 200 OK Via: SIP/2.0/UDP 84.19.176.11;branch=z9hG4bK6351.1b30ad43.0 Via: SIP/2.0/UDP 192.168.123.100:2083;received=83.65.24.161;branch=z9hG4bK-kq6qyyeowiei;rport=12499 Record-Route: <sip:84.19.176.11;lr=on;ftag=xuu6a2tp6b;nat=yes> From: "Foo Bar" <sip:foo1000@linguin.org>;tag=xuu6a2tp6b To: <sip:2000@linguin.org;user=phone>;tag=2091138726 Call-ID: 3c27e5729c40-csdi3p954zyn@snom360-0004132306CE CSeq: 2 INVITE Contact: <sip:foo2000@192.168.123.103:5060;transport=udp> Server: Cisco ATA 186 v3.1.1 atasip (040629A) Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, REFER, REGISTER Supported: replaces Content-Length: 204 Content-Type: application/sdp v=0 o=foo2000 11828 11828 IN IP4 192.168.123.103 s=ATA186 Call c=IN IP4 192.168.123.103 t=0 0 m=audio 16384 RTP/AVP 8 101 a=rtpmap:8 PCMA/8000/1 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 Any ideas? Regards, Andreas PS: this happens with both OpenSER 1.1 and 1.2

3 9

[Users] OpenSER Not able to send Notify
by kiran.bkumar＠wipro.com 05 Jun '07

05 Jun '07

Hi All, Finally I was able to get the presence server up and running with the openims and also able to do some basic tests with xlite. But the problem I am seeing is when I change the status of a user (for ex from available to busy), it sends a publish event to openser and now I expect the openser to trigger a Notify to the contacts. But this does not seem to be happening and I see some errors as below, 1(5293) SIP Request: 1(5293) method: <PUBLISH> 1(5293) uri: <sip:kiran@mkd149633.wipro.com> 1(5293) version: <SIP/2.0> 1(5293) parse_headers: flags=2 1(5293) Found param type 232, <branch> = <z9hG4bK4ac2.743db705.0>; state=16 1(5293) end of header reached, state=5 1(5293) parse_headers: Via found, flags=2 1(5293) parse_headers: this is the first via 1(5293) After parse_msg... 1(5293) preparing to run routing scripts... 1(5293) parse_headers: flags=100 1(5293) Found param type 232, <branch> = <z9hG4bK4ac2.bd17e9a7.0>; state=16 1(5293) end of header reached, state=5 1(5293) parse_headers: Via found, flags=100 1(5293) parse_headers: this is the second via 1(5293) Found param type 234, <received> = <10.117.2.44>; state=6 1(5293) Found param type 232, <branch> = <z9hG4bK-d87543-52058d7c8c660725-1--d87543->; state=6 1(5293) Found param type 235, <rport> = <5186>; state=16 1(5293) end of header reached, state=5 1(5293) parse_headers: Via found, flags=100 1(5293) DEBUG:maxfwd:is_maxfwd_present: value = 15 1(5293) DEBUG: t_newtran: T on entrance=0xffffffff 1(5293) parse_headers: flags=ffffffffffffffff 1(5293) DEBUG:parse_to:end of header reached, state=10 1(5293) DBUG:parse_to: display={"Kiran"}, ruri={sip:kiran@mkd149633.wipro.com} 1(5293) DEBUG: get_hdr_field: <To> [40]; uri=[sip:kiran@mkd149633.wipro.com] 1(5293) DEBUG: to body ["Kiran"<sip:kiran@mkd149633.wipro.com> ] 1(5293) get_hdr_field: cseq <CSeq>: <95> <PUBLISH> 1(5293) DEBUG: get_hdr_body : content_length=449 1(5293) found end of header 1(5293) parse_headers: flags=78 1(5293) t_lookup_request: start searching: hash=11428, isACK=0 1(5293) DEBUG: RFC3261 transaction matching failed 1(5293) DEBUG: t_lookup_request: no transaction found 1(5293) parse_headers: flags=ffffffffffffffff 1(5293) PRESENCE:handle_publish: SIP-If-Match found 1(5293) PRESENCE:handle_publish: existing etag = a.1181035469.5298.17 1(5293) PRESENCE: handle_publish: 'expires' found 1(5293) PRESENCE: handle_publish: lexpire= 60 1(5293) PRESENCE: handle_publish: 'To' header ALREADY PARSED: <sip:kiran@mkd149633.wipro.com> 1(5293) parse_headers: flags=ffffffffffffffff 1(5293) PRESENCE:publ_send200ok: send 200OK reply 1(5293) PRESENCE:publ_send200ok: etag= a.1181035469.5298.17 - len= 20 1(5293) parse_headers: flags=ffffffffffffffff 1(5293) check_via_address(10.154.20.45, 10.154.20.45, 0) 1(5293) PRESENCE: get_subs_dialog:The query for subscribtion for [user]= kiran,[domain]= mkd149633.wipro.com for [event]= presence returned no result 1(5293) PRESENCE:query_db_notify: Could not get subs_dialog from database 1(5293) PRESENCE:update_presentity: Could not send Notify 1(5293) DEBUG: cleanup_uac_timers: RETR/FR timers reset 1(5293) DEBUG: add_to_tail_of_timer[2]: 0xb609b268 (6756) 1(5293) DEBUG:tm:UNREF_UNSAFE: after is 0 1(5293) DEBUG:destroy_avp_list: destroying list (nil) 1(5293) receive_msg: cleaning up 5(5299) DEBUG: timer routine:2,tl=0xb609b268 next=(nil), timeout=6756 5(5299) DEBUG: wait_handler : removing 0xb609b220 from table 5(5299) DEBUG: delete transaction 0xb609b220 5(5299) DEBUG: wait_handler : done Can you please help me on this. Let me know if you need some log files/traces. Do I require to do some configuration changes or any additions to the database for this. Thanks, Kiran. The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments. WARNING: Computer viruses can be transmitted via email. The recipient should check this email and any attachments for the presence of viruses. The company accepts no liability for any damage caused by any virus transmitted by this email. www.wipro.com

2 2

[Users] pb with install the Openser and Module SQL
by li wang 05 Jun '07

05 Jun '07

Dear all, I got an error while using openser to set up the presence server in my Debian post: I have installed openser_1.2.0-0_i386.deb, but i don't find mysql.so in /usr/lib/openser/modules. So i go install the openser-mysql-module_1.2.0-0_i386.deb. It is installed but with a problem of dependance : openser-mysql-module depends libmysqlclient14 while libmysqlclient15 installed in my post. however, i can run the script openser_mysql to set up the data base. But when i restart OpenSER after edit the /etc/openser.cfg to support mysql, i got error like this: pc7:/usr/lib/openser/modules# /etc/init.d/openser restart Not starting openser: invalid configuration file! 0(15900) ERROR: load_module: could not open module </usr/lib/openser/modules/mysql.so>: libmysqlclient.so.14: cannot open shared object file: No such file or directory 0(15900) parse error (44,13-14): failed to load module ERROR: bad config file (1 errors) 0(15900) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was not allocated -> nothing to destroy But libmysqlclient14 is obsolete in the Debian repositories, there is only libmysqlclient15. Don't you have encounter the similar problem? Please help me. Thanks! My linux distribution is Linux 2.6.18-4-686. li _________________________________________________________________ Gagnez des pc Windows Vista avec Live.com http://www.image-addict.fr/

3 5

Re: [Serusers] SER and Asterisk
by Rjey Nomer 05 Jun '07

05 Jun '07

I already define the hostname of both machines and I created also an internal DNS wherein I define the following: ================================== # dig -t SRV _sip._udp.rjey.ph ; <<>> DiG 9.2.4 <<>> -t SRV _sip._udp.rjey.ph ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 13180 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 2, ADDITIONAL: 5 ;; QUESTION SECTION: ;_sip._udp.rjey.ph. IN SRV ;; ANSWER SECTION: _sip._udp.rjey.ph. 10800 IN SRV 0 0 5060 asterisk.rjey.ph. _sip._udp.rjey.ph. 10800 IN SRV 0 0 5060 ser.rjey.ph. ;; AUTHORITY SECTION: rjey.ph. 10800 IN NS ns1.rjey.ph. rjey.ph. 10800 IN NS ns2.rjey.ph. ;; ADDITIONAL SECTION: ser.rjey.ph. 10800 IN A 192.168.1.41 asterisk.rjey.ph. 10800 IN A 192.168.1.247 ns1.rjey.ph. 10800 IN A 192.168.1.7 ;; Query time: 46 msec ;; SERVER: 192.168.1.7#53(192.168.1.7) ;; WHEN: Tue Jun 5 18:32:58 2007 ;; MSG SIZE rcvd: 292 ============================ What else should I do???? Thanks, Rjey Date: Tue, 05 Jun 2007 07:24:27 -0400 From: "SIP" <sip(a)arcdiv.com> Add to Address Book Add Mobile Alert To: "Rjey Nomer" <rjeynomer(a)yahoo.com> CC: serusers(a)iptel.org Subject: Re: [Serusers] SER and Asterisk This means you can't resolve 192.168.1.247 from your SER server. Try adding an entry for it into /etc/hosts to see if you can bypass DNS. N. Rjey Nomer wrote: > Hi all, > > Hope someone can help me with this. > > The main objective are to make Asterisk and SER > communicate with each other. Call SER--> Asterisk and > Asterisk--> SER. > > I used the example configuration for pstn as base on > all the docs, it is how we can make ser and asterisk > work. As instructed on the docs, we just need to add > the IP address of the PSTN gateway on the trusted > database of our SER, in this case, asterisk is our > PSTN gateway. > > =================== > mysql> insert into trusted values > ("192.168.1.247","any","^sip:.*$"); > =================== > > On the asterisk (trixbox) server, below are the > configuration I defined: > > Outgoing Setting: > Trunk Name: serout > Peer Details: > ==================== > allow=all > dtmfmode=rfc2833 > host=192.168.1.41 > insecure=no > type=peer > ==================== > > I can ring any number on my SER Server using any > number on my Asterisk, problem is when I pick-up the > phone I cannot hear voice and according to the logs as > listed below, it is hanging-up and something like > "Unresolvable destination". > > > SER NGREP RESULT > #ngrep -n 5060 -d eth0 3242194ngrep -n 5060 -d eth0 > 3242194 > ================================= > U 192.168.1.41:5060 -> 192.168.1.247:5060 > SIP/2.0 478 Unresolvable destination (478/TM)..Via: > SIP/2.0/UDP > 192.168.1.247:5060;branch=z9hG4bK580c7aec;rport=5060..F > rom: "3000" > <sip:3000@192.168.1.247>;tag=as7693144e..To: > <sip:3242194@192.168.1.41>;tag=419e8..Call-ID: > 5784a2681edd513 > c59c77e20512b499d@192.168.1.247..CSeq: 103 > INVITE..Server: Sip EXpress router (0.9.3 > (i386/linux))..Content-Length: 0.. > Warning: 392 192.168.1.41:5060 "Noisy feedback > tells: pid=9413 req_src_ip=192.168.1.247 > req_src_port=5060 in_uri=sip:3 > 242194@192.168.1.6:52961;user=phone > out_uri=sip:3242194@192.168.1.6:52961;user=phone > via_cnt==1".... > ================================= > > Asterisk Logs > ================================= > -- Executing NoOp("SIP/3000-08fd48b8", "CallerID set > to "3000" <3000>") in new stack > -- Executing Set("SIP/3000-08fd48b8", > "GROUP()=OUT_2") in new stack > -- Executing GotoIf("SIP/3000-08fd48b8", "0?108") > in new stack > -- Executing Set("SIP/3000-08fd48b8", > "DIAL_NUMBER=3242194") in new stack > -- Executing Set("SIP/3000-08fd48b8", > "DIAL_TRUNK=2") in new stack > -- Executing AGI("SIP/3000-08fd48b8", > "fixlocalprefix") in new stack > -- Launched AGI Script > /var/lib/asterisk/agi-bin/fixlocalprefix > fixlocalprefix: Could not parse > /etc/asterisk/localprefixes.conf > -- AGI Script fixlocalprefix completed, returning > 0 > -- Executing Set("SIP/3000-08fd48b8", > "OUTNUM=3242194") in new stack > -- Executing Set("SIP/3000-08fd48b8", > "custom=SIP/Serout") in new stack > -- Executing GotoIf("SIP/3000-08fd48b8", "0?16") > in new stack > -- Executing Dial("SIP/3000-08fd48b8", > "SIP/Serout/3242194|120|r") in new stack > -- Called Serout/3242194 > -- SIP/Serout-08fda208 is ringing > -- SIP/Serout-08fda208 answered SIP/3000-08fd48b8 > -- Attempting native bridge of SIP/3000-08fd48b8 > and SIP/Serout-08fda208 > -- Got SIP response 478 "Unresolvable destination > (478/TM)" back from 192.168.1.41 > == Spawn extension (macro-dialout-trunk, s, 14) > exited non-zero on 'SIP/3000-08fd48b8' in macro > 'dialout-trunk' > == Spawn extension (macro-dialout-trunk, s, 14) > exited non-zero on 'SIP/3000-08fd48b8' > > ================================= > > Can anyone help me resolve this problem. > > Thanks in advanced. > > Rjey > > > > ____________________________________________________________________________________ > Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. > http://farechase.yahoo.com/ > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > ____________________________________________________________________________________ Don't get soaked. Take a quick peak at the forecast with the Yahoo! Search weather shortcut. http://tools.search.yahoo.com/shortcuts/#loc_weather

2 2

[Users] error 407
by amit 05 Jun '07

05 Jun '07

Hi All, when i send a reinvite request proxy give a error 407 (Proxy Authentication Required). why it is .......... Thanks amit

1 0

[Serusers] SER and Asterisk
by Rjey Nomer 05 Jun '07

05 Jun '07

Hi all, Hope someone can help me with this. The main objective are to make Asterisk and SER communicate with each other. Call SER--> Asterisk and Asterisk--> SER. I used the example configuration for pstn as base on all the docs, it is how we can make ser and asterisk work. As instructed on the docs, we just need to add the IP address of the PSTN gateway on the trusted database of our SER, in this case, asterisk is our PSTN gateway. =================== mysql> insert into trusted values ("192.168.1.247","any","^sip:.*$"); =================== On the asterisk (trixbox) server, below are the configuration I defined: Outgoing Setting: Trunk Name: serout Peer Details: ==================== allow=all dtmfmode=rfc2833 host=192.168.1.41 insecure=no type=peer ==================== I can ring any number on my SER Server using any number on my Asterisk, problem is when I pick-up the phone I cannot hear voice and according to the logs as listed below, it is hanging-up and something like "Unresolvable destination". SER NGREP RESULT #ngrep -n 5060 -d eth0 3242194ngrep -n 5060 -d eth0 3242194 ================================= U 192.168.1.41:5060 -> 192.168.1.247:5060 SIP/2.0 478 Unresolvable destination (478/TM)..Via: SIP/2.0/UDP 192.168.1.247:5060;branch=z9hG4bK580c7aec;rport=5060..F rom: "3000" <sip:3000@192.168.1.247>;tag=as7693144e..To: <sip:3242194@192.168.1.41>;tag=419e8..Call-ID: 5784a2681edd513 c59c77e20512b499d@192.168.1.247..CSeq: 103 INVITE..Server: Sip EXpress router (0.9.3 (i386/linux))..Content-Length: 0.. Warning: 392 192.168.1.41:5060 "Noisy feedback tells: pid=9413 req_src_ip=192.168.1.247 req_src_port=5060 in_uri=sip:3 242194@192.168.1.6:52961;user=phone out_uri=sip:3242194@192.168.1.6:52961;user=phone via_cnt==1".... ================================= Asterisk Logs ================================= -- Executing NoOp("SIP/3000-08fd48b8", "CallerID set to "3000" <3000>") in new stack -- Executing Set("SIP/3000-08fd48b8", "GROUP()=OUT_2") in new stack -- Executing GotoIf("SIP/3000-08fd48b8", "0?108") in new stack -- Executing Set("SIP/3000-08fd48b8", "DIAL_NUMBER=3242194") in new stack -- Executing Set("SIP/3000-08fd48b8", "DIAL_TRUNK=2") in new stack -- Executing AGI("SIP/3000-08fd48b8", "fixlocalprefix") in new stack -- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix fixlocalprefix: Could not parse /etc/asterisk/localprefixes.conf -- AGI Script fixlocalprefix completed, returning 0 -- Executing Set("SIP/3000-08fd48b8", "OUTNUM=3242194") in new stack -- Executing Set("SIP/3000-08fd48b8", "custom=SIP/Serout") in new stack -- Executing GotoIf("SIP/3000-08fd48b8", "0?16") in new stack -- Executing Dial("SIP/3000-08fd48b8", "SIP/Serout/3242194|120|r") in new stack -- Called Serout/3242194 -- SIP/Serout-08fda208 is ringing -- SIP/Serout-08fda208 answered SIP/3000-08fd48b8 -- Attempting native bridge of SIP/3000-08fd48b8 and SIP/Serout-08fda208 -- Got SIP response 478 "Unresolvable destination (478/TM)" back from 192.168.1.41 == Spawn extension (macro-dialout-trunk, s, 14) exited non-zero on 'SIP/3000-08fd48b8' in macro 'dialout-trunk' == Spawn extension (macro-dialout-trunk, s, 14) exited non-zero on 'SIP/3000-08fd48b8' ================================= Can anyone help me resolve this problem. Thanks in advanced. Rjey ____________________________________________________________________________________ Looking for a deal? Find great prices on flights and hotels with Yahoo! FareChase. http://farechase.yahoo.com/

2 1

Re: Re: [Users] pb with install the Openser and Module SQL
by Kerry 05 Jun '07

05 Jun '07

li wang, a lower version mysql may resolve your problem. mysql-standard-4.1.22-pc-linux-gnu-i686.tar.gz ======= 2007-06-05 17:22:49============ >Hi Mike, > >There isn't mysql.so if i just install the openser_1.2.0-0_i386.deb. (I do >"locate") > >It seem to be a problem of dependence for me. >Because the openser_1.2.0 depend the libmysqlclient14, but in my Debian >repositories it is obsolete, there is only libmysqlclient15. > >Which version of openser/libmysqlclient/mysqlclient/mysqlserver are you >using? > >Please give me some guidance, thanks. > >li > > >>From: "Mike Li" <lzg666(a)gmail.com> >>To: "li wang" <li.wang119(a)hotmail.com> >>CC: users(a)openser.org >>Subject: Re: [Users] pb with install the Openser and Module SQL >>Date: Tue, 5 Jun 2007 16:57:30 +0800 >> >>Hi, Wang >> >>You can try find the path of mysql.so, then ln it to >>/usr/lib/openser/modules >> >>Hope this will help you to resolve it. >> >> >>Mike >> >> >> >> >>On 6/5/07, li wang <li.wang119(a)hotmail.com> wrote: >>> >>>Dear all, >>> >>>I got an error while using openser to set up the presence server in my >>>Debian post: >>> >>>I have installed openser_1.2.0-0_i386.deb, but i don't find mysql.so in >>>/usr/lib/openser/modules. So i go install the >>>openser-mysql-module_1.2.0-0_i386.deb. >>> >>>It is installed but with a problem of dependance : >>>openser-mysql-module depends libmysqlclient14 >>>while libmysqlclient15 installed in my post. >>> >>>however, i can run the script openser_mysql to set up the data base. >>> >>>But when i restart OpenSER after edit the /etc/openser.cfg to support >>>mysql, >>>i got error like this: >>> >>>pc7:/usr/lib/openser/modules# /etc/init.d/openser restart >>>Not starting openser: invalid configuration file! >>> >>>0(15900) ERROR: load_module: could not open module >>></usr/lib/openser/modules/mysql.so>: libmysqlclient.so.14: cannot open >>>shared object file: No such file or directory >>>0(15900) parse error (44,13-14): failed to load module >>>ERROR: bad config file (1 errors) >>>0(15900) INFO:mi_fifo:mi_destroy:memory for the child's mi_fifo_pid was >>>not >>>allocated -> nothing to destroy >>> >>>But libmysqlclient14 is obsolete in the Debian repositories, there is only >>>libmysqlclient15. >>>Don't you have encounter the similar problem? >>>Please help me. Thanks! >>> >>>My linux distribution is Linux 2.6.18-4-686. >>> >>>li >>> >>>_________________________________________________________________ >>>Gagnez des pc Windows Vista avec Live.com http://www.image-addict.fr/ >>> >>> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> > >_________________________________________________________________ >Ten : Messenger en illimit?sur votre mobile ! >http://mobile.live.fr/messenger/ten/ > > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > = = = = = = = = = = = = = = = = = = = = 　　　　　　　　Kerry 　　　　　　　　sukerry(a)126.com 　　　　　　　　　　2007-06-05

1 0

[Serusers] OpenSER authorization/authentication problem
by Stephen McVarnock 04 Jun '07

04 Jun '07

I have a REGISTER coming in from the network - I have manually added details into the subscriber detail (due to problems with SERWeb and IMAP but thats another story) and so coulns like ha1 and ha2 are blank for the time being. Everything else looks above board but I am seeing the following:- 0(23824) check_nonce(): comparing [46643f80108c909178ea9d240a28fdc0c4eb74fc] and [46643f80108c909178ea9d240a28fdc0c4eb74fc] 0(23824) check_response(): Our result = '5fa07ee2806bae5342a8122fc0fde028' 0(23824) check_response(): Authorization failed 0(23824) build_auth_hf(): 'WWW-Authenticate: Digest realm="aa.bb.cc.ddd", nonce="46643f80108c909178ea9d240a28fdc0c4eb74fc" What needs to be in place in order for the authorization to work - there is obviously some kind of chksum going here but I am not sure what exactly. Regards, Steve.

1 0

[Serusers] server_monitoring
by flavio 04 Jun '07

04 Jun '07

Hi all, how can I populate server_monitoring tables? I'm looking for documentation but nothing found. Thanks, F. -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

1 0

[Users] serweb FIFO problem
by Joao Pereira 04 Jun '07

04 Jun '07

Hello Im using Serweb 0.9.4 with OpenSER following the instructions in: http://www.voip-info.org/wiki/view/OpenSER+1.1.x+and+SerWEB+0.9.4 ("register_globals = On" and the FIFO permissions are correct) I can register users with the confirmation email. But I cannot login into Serweb.The page always freezes and lots of "apache" forks are created: \_ /usr/local/apache2/bin/httpd -k start (20 or 30 of them) The problem is somewhere in the Serweb FIFO connection. Because when OpenSER isnt running, I can login into Serweb (just saying "cannot read FIFO"). did someone had the same problem with Serweb and OpenSER FIFO? Thanks regards Joao Pereira -- ______________________________________________ João Gomes Pereira FCCN Av. do Brasil, nº 101 1700-066 Lisboa tel: +351 218 440 100 - fax: +351 218 472 167 email|SIP: joao.pereira(a)fccn.pt http://www.fccn.pt ______________________________________________ ---

2 2

[Serusers] SER 2.0.0 and Iptables
by Liu Wenlong 04 Jun '07

04 Jun '07

When I run iptables and open TCP/UDP dport 5060, SER cannot send 200 OK to UAC. What's wrong with my iptables config? following is iptables config under RHEL 4.4 *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :RH-Firewall-1-INPUT - [0:0] -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -p 50 -j ACCEPT -A RH-Firewall-1-INPUT -p 51 -j ACCEPT -A RH-Firewall-1-INPUT -p udp --dport 5353 -d 224.0.0.251 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m udp --dport 631 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 5060 -j ACCEPT -A RH-Firewall-1-INPUT -m state --state NEW -m udp -p udp --dport 5060 -j ACCEPT COMMIT -- aRES iN aNYWhere

3 2

[Users] About exec_dset()
by chungyu 04 Jun '07

04 Jun '07

Dear all: I want to change the content of request uri. I use this function ,exec_dset(), to change it. This is my configuration: if (!lookup("location")) { exec_dset("/usr/local/etc/openser/shell/sh1"); #sl_send_reply("404", "Not Found"); exit; }; shell scrip: sh1 #!/bin/sh num=200(a)xx.xx.xx.xx if [! -z "$num" ] then echo "$*" else echo "sip:$num" fi but it doesn't work. error message: ERROR:exec_str: no uri from /usr/local/etc/openser/shell/sh1 XX(a)xx.xx.xx..... Can somebody tell me what's wrong with my shell script. Thank you for your response chungyu 2007/06/4

2 1

[Serusers] /home/ser/ser/ser-2.0/lib/ser/lib_ser_cds.so: undefined symbol: qm_free
by tzieleniewski 04 Jun '07

04 Jun '07

Hi, I try to run SER (rel_2_0_0) with presence and when I check my ser.cfg I get the following error, please point me what do I miss: ser@sen:~/ser/ser-2.0/ser-ssp$ ../ser -c -f ser.cfg 0(18009) ERROR: load_module: could not open module </home/ser/ser/ser-2.0/modules/dialog/dialog.so>: /home/ser/ser/ser-2.0/lib/ser/lib_ser_cds.so: undefined symbol: qm_free 0(18009) parse error (54,13-14): failed to load module 0(18009) ERROR: load_module: could not open module </home/ser/ser/ser-2.0/modules/pa/pa.so>: /home/ser/ser/ser-2.0/lib/ser/lib_ser_cds.so: undefined symbol: qm_free 0(18009) parse error (55,13-14): failed to load module Cheers tomasz

3 3

Re: [Serusers] [Serweb-users] missed calls
by flavio 04 Jun '07

04 Jun '07

I experience the same problem: missed_calls tables is populated by ser, excepted for username and domain fields. So serweb get_missed_calls method does not works properly. Can anyone can tell me something about this issue? Thanks, F. 2007/6/1, Andrey Kuprianov <andrey.kouprianov(a)gmail.com>: > I've no idea, sorry. I dont use accounting at all, actually (that's > why i didnt post any threads on this), but i'd like to know how to fix > this anyway. > > On 6/1/07, flavio <flavio.patria(a)gmail.com> wrote: > > Any suggestion to troubleshoot it? > > > > Thanks, > > > > F. > > > > 2007/6/1, Andrey Kuprianov <andrey.kouprianov(a)gmail.com>: > > > I have a similar problem. setflag(2) or logging missed call request > > > would populate DB, but leave "username" field (if i remember correctl > > > or "from_uri" and "to_uri" fields) unpopulated, so serweb wouldnt have > > > any idea of whom missed call belongs to! > > > > > > On 6/1/07, flavio <flavio.patria(a)gmail.com> wrote: > > > > Hi all, > > > > > > > > If I login in my serweb and open missed call page, I always see "No > > > > missed calls" info when missed_calls table of ser db is populated. How > > > > can I see missed calls report? > > > > > > > > Thanks for support and suggestions. > > > > > > > > F. > > > > > > > > > > > > > > > > -- > > > > ******************************** > > > > * (o< ing. Patria Flavio > > > > * //\ phone 0823451358 > > > > * V_/_ mobile 3407873357 > > > > * > > > > ******************************** > > > > _______________________________________________ > > > > Serweb-users mailing list > > > > Serweb-users(a)lists.iptel.org > > > > http://lists.iptel.org/mailman/listinfo/serweb-users > > > > > > > _______________________________________________ > > > Serweb-users mailing list > > > Serweb-users(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serweb-users > > > > > > > > > -- > > ******************************** > > * (o< ing. Patria Flavio > > * //\ phone 0823451358 > > * V_/_ mobile 3407873357 > > * > > ******************************** > > > _______________________________________________ > Serweb-users mailing list > Serweb-users(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serweb-users > -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

1 0

[Serusers] SER with 2 UAS
by Nguyen Tuan 04 Jun '07

04 Jun '07

Hi, I am just now confusing about the way of works of 2 SER Server. As you know, I set up 2 SER server and a both work perfectly, they added Identity and Identity info in the Request INVITE message, but as the way don't like I want. some facts(I use xlog() to realize this scenario ): A belong to SER1 and B belong to SER2. When A call B, the "main route logic" of SER2 (server of B) is done and when B call A, the "main route logic" of SER1(Server of A) is done. That mean, i can't add Identity into INVITE message of A of SER1 before this message come to B of SER2 because INVITE message of A isn't done with "main route logic" by server of A. How can I do "main route logic" of my SER server by myself INVITE message before it sends to another server? Or I have to set up a proxy for myself and after this proxy added Identity then it will be forward to another SER server? Thank you in advance. Tuan.

1 0

[Serusers] enum server ip
by JF 04 Jun '07

04 Jun '07

Hi, Is it possible to configure the enum module to use a specific ENUM server, instead of the DNS server configured in /etc/resolv.conf? I haven't found any config parameter for this... Thanks, JF

2 3

Re: [Serusers] About exec_dset()
by chungyu 04 Jun '07

04 Jun '07

Dear SIP: Thank your reply for my question. I modify my shell script and run the script alone. It can work My shell script: num=Bob(a)test.org if [ -z "$num" ] then echo "$*" else echo $num fi When I call Alice(a)test1.org then request uri will change to Bob(a)test.org. But still did not work. Thank your response Chungyu > That script a) has syntax errors, and b) doesn't make any sense. > > Have you run the script alone? The line: > if[! -z "$num" ] > needs a space before the ! > > Also, logically, I don't get what you're trying to do. Currently, your > script checks to see if $num has a value. If it DOES, then it echoes > back the script arguments. If not, it echoes back sip:$num.... which > doesn't make a bit of sense. You set $num in the beginning, so it ALWAYS > has a value... so it's always going to echo back the script arguments. > And if, for some strange reason, it DIDN'T have a value, why would you > want to echo back a non-value? > > I don't get it. > > > chungyu wrote: >> Dear all: >> I want to change the content of request uri. I use this function >> ,exec_dset(), to change it. >> This is my configuration: >> if (!lookup("location")) { >> exec_dset("/usr/local/etc/openser/shell/sh1"); >> #sl_send_reply("404", "Not Found"); >> exit; >> }; >> shell scrip: sh1 >> #!/bin/sh >> num=200(a)xx.xx.xx.xx <mailto:num=200@xx.xx.xx.xx> >> if [! -z "$num" ] >> then >> echo "$*" >> else >> echo "sip:$num" >> fi >> >> but it doesn't work. >> error message: >> ERROR:exec_str: no uri from /usr/local/etc/openser/shell/sh1 >> XX(a)xx.xx.xx <mailto:XX@xx.xx.xx>..... >> Can somebody tell me what's wrong with my shell script. >> Thank you for your response >> chungyu >> 2007/06/4 >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> > >

1 0

[Serusers] rpm for SER
by Mukesh Prajapati 04 Jun '07

04 Jun '07

hi all where do i get rpm for SER.. I couldn't find it on ftp of iptel.org please help me in this regard waiting for reply. thnks mukesh --------------------------------- Don't be flakey. Get Yahoo! Mail for Mobile and always stay connected to friends.

2 1

[Serusers] About exec_dset()
by chungyu 04 Jun '07

04 Jun '07

Dear all: I want to change the content of request uri. I use this function ,exec_dset(), to change it. This is my configuration: if (!lookup("location")) { exec_dset("/usr/local/etc/openser/shell/sh1"); #sl_send_reply("404", "Not Found"); exit; }; shell scrip: sh1 #!/bin/sh num=200(a)xx.xx.xx.xx if [! -z "$num" ] then echo "$*" else echo "sip:$num" fi but it doesn't work. error message: ERROR:exec_str: no uri from /usr/local/etc/openser/shell/sh1 XX(a)xx.xx.xx..... Can somebody tell me what's wrong with my shell script. Thank you for your response chungyu 2007/06/4

1 0

[Serusers] Checking the transport type
by tzieleniewski 04 Jun '07

04 Jun '07

hi, Is there an easy way to check what kind of transport is going to be used by SER in the next hop of the sent message?? do I have to do all the checks considering the Route header or Request URI (tcp or sips) ?? The reason is that I want to force my traffic to go through boundary proxy and in case of tcp and udp different functions should be used in ser.cfg. Thanks in advance Cheer Tomasz

1 0

[Users] radius/diameter for accounting
by Tim 04 Jun '07

04 Jun '07

Anyone using radius or diameter for accounting? If you are could you please share a little about your experience? Thanks, Tim

2 1

Re: [Serusers] NAT Problem with PAP2
by Nhadie 04 Jun '07

04 Jun '07

hi, i did not, as i thought it didn't it because it was registering as a public IP already. i will try that. thanks regards, nhadie Eneref wrote: > Do you have STUN support enabled on the PAP2? > > N. > > > Nhadie wrote: >> Hi All, >> >> >> I'm testing the default of config of ser, and just adding some >> nathelper command to make it 2 UA's work, I have an x-lite and a PAP2 >> both are behind nat. >> >> X-lite is being detected by ser as behind NAT, but the PAP2 isn't, >> the ser thinks the PAP2 is registering with public IP. >> >> When I call from PAP2 to X-lite, i have no problem, because the c= IN >> on the SIP/200 OK reply is already public IP, so wehen PAP2 sends an >> ACK or BYE it sends it the c=IN of X-lite which is public IP. >> >> But when I call vice versa, that PAP send c=IN as private IP so when >> X-lite sends an ACK/BYE, it wil send it to the private IP. which >> obviously will not be able to be recieved by PAP2. >> >> How can I fix this? Another thing i don't get is that why PAP2 >> registers as not behind NAT, but when it replies to messages, it is >> sending the private IP on the c= IN. >> >> Anyone experienced this before? >> >> TIA >> >> Regards, >> Nhadie >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> > > >

1 0

[Serusers] NAT Problem with PAP2
by Nhadie 04 Jun '07

04 Jun '07

Hi All, I'm testing the default of config of ser, and just adding some nathelper command to make it 2 UA's work, I have an x-lite and a PAP2 both are behind nat. X-lite is being detected by ser as behind NAT, but the PAP2 isn't, the ser thinks the PAP2 is registering with public IP. When I call from PAP2 to X-lite, i have no problem, because the c= IN on the SIP/200 OK reply is already public IP, so wehen PAP2 sends an ACK or BYE it sends it the c=IN of X-lite which is public IP. But when I call vice versa, that PAP send c=IN as private IP so when X-lite sends an ACK/BYE, it wil send it to the private IP. which obviously will not be able to be recieved by PAP2. How can I fix this? Another thing i don't get is that why PAP2 registers as not behind NAT, but when it replies to messages, it is sending the private IP on the c= IN. Anyone experienced this before? TIA Regards, Nhadie

2 1

[Serusers] TECHNICAL BOARD: Open for voting
by Greger V. Teigre 03 Jun '07

03 Jun '07

Hi all, Unless somebody objects, I assume the responsibility as coordinator of the voting on the technical board. Voting on candidates for the technical board of iptel.org is now open and will be open the next seven days. The rules governing the voting can be found at http://www.iptel.org/technicalboard/rules. A summary/howto can be found below. Where to send your vote =================== To make a public vote: send an email to one or more of the iptel.org lists seruser(a)iptel.rog, serdev(a)iptel.org, semsdev(a)iptel.org To make a secret vote: send an email to the coordinator at greger(a)iptel.org How to vote =========== The candidates can be found at http://www.iptel.org/nominations_and_voting_technical_board_2007. We have a total of eight candidates. Send an email with subject line "Vote: Technical Board" listing 1-5 people from the candidate list that you want on the iptel.org technical board. Each name listed in your email will give one vote to that person. Please note: * The board has an assigned seat for a SEMS representative and there are two candidates from SEMS (marked on the list of candidates). The SEMS seat will be assigned to the candidate with the highest number of votes counting only these two. * Two members of the board must have SER CVS write privileges (SER developer). Thus, the two candidates with such privileges having the highest number of votes will be elected. * The remaining three seat do not have any restrictions. Thus, once the SEMS and SER developer representatives have been elected, the remaining three candidates with the highest number of votes will be elected. * The number of votes for each candidate will be listed on http://www.iptel.org/nominations_and_voting_technical_board_2007

1 0

[Serusers] does anybody knows what that mean?
by olivier.taylor 02 Jun '07

02 Jun '07

What exactly means this message, it doesn't seems so important because everything works ok for my users. Regards, Olivier Jun 2 16:19:44 finalcut ser[51227]: ERROR: udp_send: sendto(sock,0x28325408,4,0,0xbfbfeab0,16): No buffer space available(55)

1 0

[Serusers] SER Ring Timeer/Time Out
by Cyprian Clement 02 Jun '07

02 Jun '07

Hi everybody, Just a quick question, is there a parameter in SER that I can set to control the INVITE will be Cancelled/TimedOout(towards the Called Party) if the called party keeps ringing without picking up the phone?. Thanks in advance. Regards, Cyp. ------- ___________________________________________________________ Inbox full of unwanted email? Get leading protection and 1GB storage with All New Yahoo! Mail. http://uk.docs.yahoo.com/nowyoucan.html

1 0

[Serusers] SER - functional architecture.
by dciepiel＠orange.pl 02 Jun '07

02 Jun '07

Hi, I am a new user of Sip Express Router and I`m looking for SER functional architecture. If anybody have some informations or documents about it I will be grateful for sending it to me. cheers, Deny. dciepiel(a)orange.pl

1 0

[Serusers] ACK and BYE being sent to private IP of UA
by Nhadie 02 Jun '07

02 Jun '07

hi, how can i fix ACK and BYE being sent to private IP of UA? here's sample sniff: caller - 1000 - pap2 callee - 1002 - x-lite caller and callee on the same nat router - public IP -- 222.127.83.25 sip server -- 210.1.71.3 i know there's something wrong with my config i just don't know what. hope anyone can help me U 210.1.71.3:5060 -> 222.127.83.25:60149 SIP/2.0 180 Ringing..Via: SIP/2.0/UDP 222.127.83.25:60149;branch=z9hG4bK-33496bfb..From: 1000 < sip:1000@sip.tbgi.net.ph>;tag=183e34c24b4aa0afo0..To: <sip:1002@sip.tbgi.net.ph>;tag=3030149153 ..Contact: <sip:1002@222.127.83.25:61984>..Record-Route: <sip:210.1.71.3;ftag=183e34c24b4aa0afo 0;lr=on>..Call-ID: a8c6587e-dc2c7023@222.127.83.25..CSeq: 102 INVITE..Server: X-Lite release 11 03m..Content-Length: 0.... # U 222.127.83.25:61984 -> 210.1.71.3:5060 SIP/2.0 200 Ok..Via: SIP/2.0/UDP 210.1.71.3;branch=z9hG4bK5e5d.f1f4dec7.0..Via: SIP/2.0/UDP 222 .127.83.25:60149;branch=z9hG4bK-33496bfb..From: 1000 <sip:1000@sip.tbgi.net.ph>;tag=183e34c24b4 aa0afo0..To: <sip:1002@sip.tbgi.net.ph>;tag=3030149153..Contact: <sip:1002@222.127.83.25:61984> ..Record-Route: <sip:210.1.71.3;ftag=183e34c24b4aa0afo0;lr=on>..Call-ID: a8c6587e-dc2c7023@222. 127.83.25..CSeq: 102 INVITE..Content-Type: application/sdp..Server: X-Lite release 1103m..Conte nt-Length: 296....v=0..o=1002 26427691 26433779 IN IP4 222.127.83.25..s=X-Lite..c=IN IP4 222.12 7.83.25..t=0 0..m=audio 60272 RTP/AVP 0 8 3 98 97 101..a=rtpmap:0 pcmu/8000..a=rtpmap:8 pcma/80 00..a=rtpmap:3 gsm/8000..a=rtpmap:98 iLBC/8000..a=rtpmap:97 speex/8000..a=rtpmap:101 telephone- event/8000..a=fmtp:101 0-15.. # U 210.1.71.3:5060 -> 222.127.83.25:60149 SIP/2.0 200 Ok..Via: SIP/2.0/UDP 222.127.83.25:60149;branch=z9hG4bK-33496bfb..From: 1000 <sip:1 000(a)sip.tbgi.net.ph>;tag=183e34c24b4aa0afo0..To: <sip:1002@sip.tbgi.net.ph>;tag=3030149153..Con tact: <sip:1002@222.127.83.25:61984>..Record-Route: <sip:210.1.71.3;ftag=183e34c24b4aa0afo0;lr= on>..Call-ID: a8c6587e-dc2c7023@222.127.83.25..CSeq: 102 INVITE..Content-Type: application/sdp. .Server: X-Lite release 1103m..Content-Length: 316....v=0..o=1002 26427691 26433779 IN IP4 222. 127.83.25..s=X-Lite..c=IN IP4 222.127.83.25..t=0 0..m=audio 60272 RTP/AVP 0 8 3 98 97 101..a=rt pmap:0 pcmu/8000..a=rtpmap:8 pcma/8000..a=rtpmap:3 gsm/8000..a=rtpmap:98 iLBC/8000..a=rtpmap:97 speex/8000..a=rtpmap:101 telephone-event/8000..a=fmtp:101 0-15..a=direction:active.. # U 222.127.83.25:60149 -> 210.1.71.3:5060 ACK sip:1002@192.168.254.7:5062 SIP/2.0..Via: SIP/2.0/UDP 222.127.83.25:60149;branch=z9hG4bK-a2 95ad98..From: 1000 <sip:1000@sip.tbgi.net.ph>;tag=183e34c24b4aa0afo0..To: <sip:1002@sip.tbgi.ne t.ph>;tag=3030149153..Call-ID: a8c6587e-dc2c7023@222.127.83.25..CSeq: 102 ACK..Max-Forwards: 70 ..Route: <sip:210.1.71.3;ftag=183e34c24b4aa0afo0;lr=on>..Authorization: Digest username="1000", realm="tbgi.net.ph",nonce="466102f26d432f3f1214359a01eaa784e208caa7",uri="sip:1002@192.168.254. 7:5062",algorithm=MD5,response="ff4da318be9647ed5506b3a6ed042f65"..Contact: 1000 <sip:1000@222. 127.83.25:60149>..User-Agent: Linksys/PAP2-3.1.3(LS)..Content-Length: 0.... # U 210.1.71.3:5060 -> 192.168.254.7:5062 ACK sip:1002@192.168.254.7:5062 SIP/2.0..Record-Route: <sip:210.1.71.3;ftag=183e34c24b4aa0afo0; lr=on>..Via: SIP/2.0/UDP 210.1.71.3;branch=0..Via: SIP/2.0/UDP 222.127.83.25:60149;branch=z9hG4 bK-a295ad98..From: 1000 <sip:1000@sip.tbgi.net.ph>;tag=183e34c24b4aa0afo0..To: <sip:1002@sip.tb gi.net.ph>;tag=3030149153..Call-ID: a8c6587e-dc2c7023@222.127.83.25..CSeq: 102 ACK..Max-Forward s: 16..Authorization: Digest username="1000",realm="tbgi.net.ph",nonce="466102f26d432f3f1214359 a01eaa784e208caa7",uri="sip:1002@192.168.254.7:5062",algorithm=MD5,response="ff4da318be9647ed55 06b3a6ed042f65"..Contact: 1000 <sip:1000@222.127.83.25:60149>..User-Agent: Linksys/PAP2-3.1.3(L S)..Content-Length: 0..P-hint: rr-enforced.... --- config start -- # main routing logic route{ setflag(8); # Turn on XLOG Debugging if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; if (!method=="REGISTER") { setflag(9); record_route(); } if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if ((method=="BYE") || (method=="CANCEL")) { setflag(9); }; append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (src_ip==XX.XX.XX.XX) { if (isflagset(8)) {xlog("L_INFO","From ASTERISK");}; setflag(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; if (uri==myself) { if (method=="REGISTER") { if (isflagset(8)) {xlog("L_INFO","UA Trying to Register...");}; if (!www_authorize("tbgi.net.ph", "subscriber")) { www_challenge("tbgi.net.ph", "0"); break; }; if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { if (isflagset(8)) {xlog("L_INFO","UA Behind NAT\n");}; setflag(6); fix_nated_register(); force_rport(); } else { if (isflagset(8)) {xlog("L_INFO","UA not Behind NAT");}; }; save("location"); break; }; if (uri=~"^(sip:)?[1-8]...@(([a-z]+\.)?tbgi.net.ph|210\.1\.71\.3)") { if (isflagset(8)) {xlog("L_INFO","CALL TO LOCAL DESTINATION\n");}; setflag(2); if (method=="INVITE") { if (!www_authorize("tbgi.net.ph", "subscriber")) { www_challenge("tbgi.net.ph", "0"); break; }; if (nat_uac_test("19")) { if (isflagset(8)) {xlog("L_INFO","INVITE FROM NATTED UA\n");}; setflag(6); fix_nated_contact(); force_rport(); fix_nated_sdp("3"); }; }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; route(1); break; } else if (uri=~"^(sip:)?00[0-9]*@(([a-z]+\.)?tbgi.net.ph|210\.1\.71\.3)") { if (isflagset(8)) {xlog("L_INFO","CALL TO INTERNATIONAL\n");}; setflag(3); if (method=="INVITE") { if (!www_authorize("tbgi.net.ph", "subscriber")) { www_challenge("tbgi.net.ph", "0"); break; }; if (nat_uac_test("19")) { if (isflagset(8)) {xlog("L_INFO","INVITE FROM NATTED UA\n");}; setflag(6); fix_nated_contact(); force_rport(); fix_nated_sdp("3"); }; }; prefix("9"); rewritehostport("XX.XX.XX.XX:5060"); t_relay_to_udp("XX.XX.XX.XX", "5060"); break; }; route(1); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { t_on_reply("1"); if (!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if (isflagset(6) && status=~"(183)|2[0-9][0-9]" && !search("^Content-Length:\ +0")) { if (isflagset(8)) {xlog("L_INFO","ON REPLY FROM NATTED UA\n");}; fix_nated_contact(); fix_nated_sdp("3"); } else if (nat_uac_test("1")) { if (isflagset(8)) {xlog("L_INFO","ON REPLY FROM NATTED UA ALTERNATIVE\n");}; fix_nated_contact(); }; } ________________________________________________ Message sent using UebiMiau 2.7

1 0

[Serusers] TOS question - should see 0x10, am seeing 0x00
by Ravindranath Gummadidala 01 Jun '07

01 Jun '07

Hi, I am using SER 0.9.4. I want to make sure that all SIP traffic from the SER is marked with a specific DSCP value. I grepped in the src and found that SER already does this for both TCP and UDP sockets using a setsockopt with a value IPTOS_LOWDELAY (0x10). However, a packet trace I captured shows that the TOS field is 0x00. It did not look to me like the TOS setting code was featurized, so I am not sure what is going on here. Anyone have any ideas. Regards, -Ravi.

1 0

[Users] acc::log_extra question
by Will Quan 01 Jun '07

01 Jun '07

Hi all,I noticed that if I request to log a field that was not present in the SIP message it doesnt log 'n/a' anymore.Is this design intent ?Here is an example:/* I would like to see diversion in log */modparam("acc", "log_extra", "div=$di")However if not present, later I get an error in the logs:xl_get_diversion: ERROR cannot parse Diversion headerThe 1.1.x behavior was to not generate that error while the actual ACC had a value of 'n/a'.Regards,Will

1 0

[Serusers] Help for mysql to ser 2.0.0. rc1
by Liu Wenlong 01 Jun '07

01 Jun '07

why there is not a subscriber table in my_create.sql of ser 2.0.0 rc1? AND how can I create it? thanks -- aRES iN aNYWhere

2 1

[Users] DNS SRV Setting for the OpenSER proxies
by raviprakash sunkara 01 Jun '07

01 Jun '07

Hello Users, I'm tring to configuring the load balance , Initial i have 2 sip proxies and centralized database. for 2 sip proxies database is common , ie. centralized. Let Assume the proxy1 is a.b.c.b , other proxy2 is 1.2.3.4 and proxy domain name is sip.sample.com , is common if the proxy1 is not started or some failure case , it has goes to the second proxy2.. but this is not happening at all. i follow this url for DNS_setting -- > http://www.voip-info.org/wiki/view/DNS+SRV all the request going to proxy1 only. but not the proxy2.... please any can guide me regarding this... -- Thanks &Regards Ravi Prakash Sunkara

1 0

[Users] "invalid cseq for aor" in replicated registrations
by Papadopoulos Georgios 01 Jun '07

01 Jun '07

Hello all, I have a question about replicated registrations. Server1 sends an authenticated REGISTER to server2. The script looks like: if (method=="REGISTER") { if (src_ip==server1) { # Handle replicated registrations. No need to authenticate, just save. if (!save("location")) sl_reply_error(); } else { # Digest authentication if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); return; } if (!check_from() | !check_to()) { sl_send_reply("400", "Bad Request"); return; } if (!save("location")) { sl_reply_error(); } # Send a copy of this registration to the other proxy t_replicate("sip:server2:5060"); } return; } On server2 I get this message: ERROR:registrar:update_contacts: invalid cseq for aor <...> But I don't have the same message on server1. If the cseq is invalid then how come server1 saves it successfuly and then replicates it to server2? thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

1 0

Re: [Users] starting openser error
by Henning Westerholt 01 Jun '07

01 Jun '07

On Freitag, 1. Juni 2007, you wrote: > OK, I would install a newer version then, which one do you recommend > me to install? > > Do I have to uninstall the old one or just make an update? The latest stable version 1.2.1 should be fine. Look at the migration notes in the wiki for update hints, http://openser.org/dokuwiki/doku.php As you going from 1.0 to 1.2, a complete new installation would be probably easier. So uninstall the old openser, backup your database tables, install the new and migrate the data to the new installation. You find informations about the necessary changes in the mentioned documents. Henning P.S: please CC at the user list

1 0

[Serusers] Preserve DSCP marking
by Ravindranath Gummadidala 01 Jun '07

01 Jun '07

Does SER have support for preserving the DSCP markings of (incoming) SIP messages it processes before sending them out? Or is this something one would need to change the SER source code for? I searched in the archives but could not find anything relevant. Regards, -Ravi.

3 2

Re: [Users] starting openser error
by Henning Westerholt 01 Jun '07

01 Jun '07

On Freitag, 1. Juni 2007, isetien001(a)ikasle.ehu.es wrote: > > > I got an error while starting openser: > > > > > > openser[15247]: usrloc:preload_udomain: Wrong version v1004 for table > > > <location>, expected v1001 > > > [..] > > > I realize that I have a problem with the version of the openser > > > binaries and the openser_mysql script version, but I don't really know > > > wich is the problem and how to solve it. > > > > Hello Izortze, > > > > your version of the openser_mysql script must match the openser binary > > version. Otherwise the created tables from the script would not match. > > What version of openser do you use? > > I use openser 1.0.1-notls (i386/linux) > > Thanks a lot This version is really old, you should consider doing an upgrade. Please control the version (installation source) of the openser_mysql script. This must be the same version as the binary package as i said. Henning

1 0

[Users] starting openser error
by isetien001＠ikasle.ehu.es 01 Jun '07

01 Jun '07

Dear all: I got an error while starting openser: openser[15247]: Maxfwd module- initializing openser[15247]: usrloc:preload_udomain: Wrong version v1004 for table <location>, expected v1001 openser[15247]: register_udomain(): Error while preloading domain 'location' openser[15247]: domain_fixup(): Error while registering domain I realize that I have a problem with the version of the openser binaries and the openser_mysql script version, but I don't really know wich is the problem and how to solve it. Any help will be wellcome. Thanks a lot, Izortze.

2 1

[Users] changes in database setup scripts
by Henning Westerholt 01 Jun '07

01 Jun '07

Hello all, i've commited new database setup scripts for mysql and postgresql. Now are the SQL tables generated from a common XML definition, to avoid inconsistencies between the different databases. With the new system is not more necessary to update three different shell scripts for one database table change, hopefully this will lead to fewer bugs. The dbtext integration is still missing, i'll work on this and on further extension of the system in two weeks after the programming course in paris. I've tested the new system with mysql 5.0 and postgresql 8.2, but there are probably still some bugs present. So if you get an database setup script related error from trunk, don't hesitate to complain here or on the devel list. :-) You'll find further informations about this system in the wiki: http://www.openser.org/dokuwiki/doku.php/development:db-schema Best regards, Henning

2 4

[Users] Unable to downlaod the source
by sreekanth 01 Jun '07

01 Jun '07

Hi, I am not able to download the source code from the following link http://www.openser.org/mos/view/Download/ Pls clarify on this.. Rgds, Sreekanth This e-mail and attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient's) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

2 1

[Serusers] wrong password
by ram 01 Jun '07

01 Jun '07

Hi iam runing SER and my client is registering with Asterisk, running call center he keep getting the following error chan_sip.c: Forbidden - wrong password on authentication for INVITE to '"M0601001458000013456" <sip:user@domain.com>;tag=as5bbc2eec' and voice going choppy, when he call from single user the voice go clear when he intiates the calls from number of people voice is very choppy and some time not able to hear all are public IP, not NAT here any suggestions ram

2 1

[Users] Openser 1.2.1 with SERWeb 0.9.6-cannot open write fifo
by Lesley Liu 01 Jun '07

01 Jun '07

Hi Users, I'm setup SERWeb 0.9.6 with Openser 1.2.1. At first, when login with correct username/password, there is a "sorry -- cannot open write fifo" on the my_account.php. Referred from google, I changed the access right of openser_fifo to 666; that cause the my_account.php does not show. Please kindly advise, thanks in advance. Regards, Lesley

2 3

[Serusers] Fwd: SIP 479 Regretfully
by flavio 31 May '07

31 May '07

---------- Forwarded message ---------- From: flavio <flavio.patria(a)gmail.com> Date: 31-mag-2007 18.04 Subject: Re: [Serusers] SIP 479 Regretfully To: olivier.taylor(a)hh174.be But If I try with my BT102 GrandStream (configured as Polycom on my SER) I'm able to start a call to PSTN Number. How is it possible? Have you any suggestions about? Thanks, ps I've also asterisk running on the same machine listening on port 5062. U 2007/05/31 18:00:52.457140 10.28.19.124:5060 -> 10.28.19.202:5060 INVITE sip:0672020949@10.28.19.202 SIP/2.0. Via: SIP/2.0/UDP 10.28.19.124;branch=z9hG4bK5654e41ba6af4166. From: <sip:0660522016@10.28.19.202>;tag=44dcaa39db672de9. To: <sip:0672020949@10.28.19.202>. Contact: <sip:0660522016@10.28.19.124>. Supported: replaces. Proxy-Authorization: Digest username="0660522016", realm="10.28.19.202", algorithm=MD5, uri="sip:0672020949@10.28.19.202", nonce="465f0e8002ccdf57a20d382a49036bd0e5c691d0", response="554b818d1ecfc8455f1bc2e774881508". Call-ID: 19d87a9eb5a4d432(a)10.28.19.124. CSeq: 17072 INVITE. User-Agent: Grandstream BT110 1.0.8.12. Max-Forwards: 70. Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE. Content-Type: application/sdp. Content-Length: 211. . v=0. o=0660522016 8000 8001 IN IP4 10.28.19.124. s=SIP Call. c=IN IP4 10.28.19.124. t=0 0. m=audio 5004 RTP/AVP 18 8 0. a=sendrecv. a=rtpmap:18 G729/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=ptime:20. 2007/5/31, olivier.taylor <olivier.taylor(a)gmail.com>: > hi, > > Regretfully, we were not able to process the URI > > probably a malformed URI, don't you have to remove the leading 0 and add the international code? > > hope it helps, > > Olivier > > > > flavio a écrit : > > Hi to all. > > I've configured my polycom ip500 IPphone to use it with ser. > > If I try a call to users registred to ser all works fine. > > If I try to call PSTN Number through my gateway I've the follow sip message: > > > > > > > > INVITE sip:0672028405@10.28.19.202:5060;user=phone SIP/2.0. > > Via: SIP/2.0/UDP 10.28.19.143;branch=z9hG4bKbb2623fe3F3B54DD. > > From: "0660522015" <sip:0660522015@10.28.19.202>;tag=8DDF0DB-E8BCEB84. > > To: <sip:0672028405@10.28.19.202;user=phone>. > > CSeq: 2 INVITE. > > Call-ID: 264aa927-d2a3a7c9-64f3fe3a(a)10.28.19.143. > > Contact: <sip:0660522015@10.28.19.143>. > > Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, > > NOTIFY, PRACK, UPDATE, REFER. > > User-Agent: PolycomSoundPointIP-SPIP_500-UA/1.4.1. > > Supported: 100rel,replace. > > Allow-Events: talk,hold,conference. > > Proxy-Authorization: Digest username="0660522015", > > realm="10.28.19.202", > > nonce="465ef44bbb09c0155dc8555314519a20cac896f8", > > uri="sip:0672028405@10.28.19.202:5060;user=phone", > > response="e6eed258e095ee6be5be6c92210f9d99", algorithm=MD5. > > Max-Forwards: 70. > > Content-Type: application/sdp. > > Content-Length: 237. > > . > > v=0. > > o=- 1180620549 1180620549 IN IP4 10.28.19.143. > > s=Polycom IP Phone. > > c=IN IP4 10.28.19.143. > > t=0 0. > > m=audio 2234 RTP/AVP 18 8 0 101. > > a=rtpmap:18 G729/8000. > > a=rtpmap:8 PCMA/8000. > > a=rtpmap:0 PCMU/8000. > > a=rtpmap:101 telephone-event/8000. > > > > # > > U 2007/05/31 16:09:03.527834 10.28.19.202:5060 -> 10.28.19.143:5060 > > SIP/2.0 479 Regretfully, we were not able to process the URI (479/SL). > > Via: SIP/2.0/UDP 10.28.19.143;branch=z9hG4bKbb2623fe3F3B54DD. > > From: "0660522015" <sip:0660522015@10.28.19.202>;tag=8DDF0DB-E8BCEB84. > > To: <sip:0672028405@10.28.19.202;user=phone>;tag=979d95a734c13f6db8b9e3a72b9f44a0.14e7. > > CSeq: 2 INVITE. > > Call-ID: 264aa927-d2a3a7c9-64f3fe3a(a)10.28.19.143. > > Server: Sip EXpress router (0.9.6 (i386/linux)). > > Content-Length: 0. > > Warning: 392 10.28.19.202:5060 "Noisy feedback tells: pid=8314 > > req_src_ip=10.28.19.143 req_src_port=5060 > > in_uri=sip:0672028405@10.28.19.202:5060;user=phone > > out_uri=sip:0672028405@10.28.52.105:5060:5060;user=phone via_cnt==1". > > > > > > Have you any suggestion about? > > I use my Polycom with Asterisk and BroadSoft without any problem. > > > > Thanks for your support and great patience :D > > > > Bye, > > > > F. > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ******************************** -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

2 2

[Users] load testing presence server
by Toni Barata 31 May '07

31 May '07

Hi All, A test case with SUBSCRIBE winfo event message have reached values of hundreds of messages per second in a load test scenario. But a test case with SUBSCRIBE presence event message have only reached values of 20 messages per second. Is there any explainable reason for this big difference between the results of both test cases? Thanks, Toni

1 0

Re: [Users] adding users
by Jeremy George 31 May '07

31 May '07

Okay, thanks. - Jeremy >-----Original Message----- >From: Ovidiu Sas [mailto:sip.nslu@gmail.com] >Sent: Thursday, May 31, 2007 10:42 AM >To: 'Jeremy George' >Cc: users(a)openser.org >Subject: Re: [Users] adding users > >Hi Jeremy, > >Have you installed the serweb tables? >If yes, you have to set HAS_SERWEB="yes" in your openserctlrc. Check >the mailing list archive, this issue was already discusses a few >times. > > >Regards, >Ovidiu Sas > >On 5/31/07, Jeremy George <jeremy(a)georgeco.us> wrote: >> >> I upgraded to 1.2.1 and completely re-created the db. Now I can add >> exactly one user to the db. Also, trying to delete that one user from >> openserctl hangs. Thoughts? >> >> Thanks much. >> >> - Jeremy >> >> Breathless-FC6# openserctl add jeremy xxxx murph(a)the.surf >> MySql password for user 'openser@localhost': >> new user 'jeremy' added >> Breathless-FC6# openserctl add helen xxxx murph(a)the.surf >> MySql password for user 'openser@localhost': >> ERROR 1062 (23000) at line 1: Duplicate entry '' for key 3 >> ERROR: introducing the new user 'helen' to the database failed >> Breathless-FC6# >> Breathless-FC6# openserctl rm jeremy >> >> >> >> >> _______________________________________________ >> Users mailing list >> Users(a)openser.org >> http://openser.org/cgi-bin/mailman/listinfo/users >> >

1 0

[Users] adding users
by Jeremy George 31 May '07

31 May '07

I upgraded to 1.2.1 and completely re-created the db. Now I can add exactly one user to the db. Also, trying to delete that one user from openserctl hangs. Thoughts? Thanks much. - Jeremy Breathless-FC6# openserctl add jeremy xxxx murph(a)the.surf MySql password for user 'openser@localhost': new user 'jeremy' added Breathless-FC6# openserctl add helen xxxx murph(a)the.surf MySql password for user 'openser@localhost': ERROR 1062 (23000) at line 1: Duplicate entry '' for key 3 ERROR: introducing the new user 'helen' to the database failed Breathless-FC6# Breathless-FC6# openserctl rm jeremy

2 1

[Serusers] SIP 479 Regretfully
by flavio 31 May '07

31 May '07

Hi to all. I've configured my polycom ip500 IPphone to use it with ser. If I try a call to users registred to ser all works fine. If I try to call PSTN Number through my gateway I've the follow sip message: INVITE sip:0672028405@10.28.19.202:5060;user=phone SIP/2.0. Via: SIP/2.0/UDP 10.28.19.143;branch=z9hG4bKbb2623fe3F3B54DD. From: "0660522015" <sip:0660522015@10.28.19.202>;tag=8DDF0DB-E8BCEB84. To: <sip:0672028405@10.28.19.202;user=phone>. CSeq: 2 INVITE. Call-ID: 264aa927-d2a3a7c9-64f3fe3a(a)10.28.19.143. Contact: <sip:0660522015@10.28.19.143>. Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, INFO, MESSAGE, SUBSCRIBE, NOTIFY, PRACK, UPDATE, REFER. User-Agent: PolycomSoundPointIP-SPIP_500-UA/1.4.1. Supported: 100rel,replace. Allow-Events: talk,hold,conference. Proxy-Authorization: Digest username="0660522015", realm="10.28.19.202", nonce="465ef44bbb09c0155dc8555314519a20cac896f8", uri="sip:0672028405@10.28.19.202:5060;user=phone", response="e6eed258e095ee6be5be6c92210f9d99", algorithm=MD5. Max-Forwards: 70. Content-Type: application/sdp. Content-Length: 237. . v=0. o=- 1180620549 1180620549 IN IP4 10.28.19.143. s=Polycom IP Phone. c=IN IP4 10.28.19.143. t=0 0. m=audio 2234 RTP/AVP 18 8 0 101. a=rtpmap:18 G729/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:101 telephone-event/8000. # U 2007/05/31 16:09:03.527834 10.28.19.202:5060 -> 10.28.19.143:5060 SIP/2.0 479 Regretfully, we were not able to process the URI (479/SL). Via: SIP/2.0/UDP 10.28.19.143;branch=z9hG4bKbb2623fe3F3B54DD. From: "0660522015" <sip:0660522015@10.28.19.202>;tag=8DDF0DB-E8BCEB84. To: <sip:0672028405@10.28.19.202;user=phone>;tag=979d95a734c13f6db8b9e3a72b9f44a0.14e7. CSeq: 2 INVITE. Call-ID: 264aa927-d2a3a7c9-64f3fe3a(a)10.28.19.143. Server: Sip EXpress router (0.9.6 (i386/linux)). Content-Length: 0. Warning: 392 10.28.19.202:5060 "Noisy feedback tells: pid=8314 req_src_ip=10.28.19.143 req_src_port=5060 in_uri=sip:0672028405@10.28.19.202:5060;user=phone out_uri=sip:0672028405@10.28.52.105:5060:5060;user=phone via_cnt==1". Have you any suggestion about? I use my Polycom with Asterisk and BroadSoft without any problem. Thanks for your support and great patience :D Bye, F.

1 0

[Users] openserctl ping broken?
by Papadopoulos Georgios 31 May '07

31 May '07

Hello all, I am having trouble getting openserct ping to work (version 1.2). The server is running but I get [1]+ Done cat <$path | filter_fl 400 I modified openserct at the options_ping() function to do echo $RET and I get [1]+ Done cat <$path | filter_fl 400 Too few or too many arguments I tried playing around with the arguments according to the documentation for tm's function t_uac_dlg, but no luck. Can someone help? thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

1 0

[Serusers] SERVER REDIRECTION
by Cyprian Clement 31 May '07

31 May '07

Does any one know what modules(and corresponding functions if possible) that I need to use in order to make the SER do the Redirection by initiating a 302( after the reception of INVITE) that contains the contact info/uri that the caller will need to use to call the forwarded-to client? Can this be achieved without the need to use CPL language? Thanks in advance. Regards, Cyp. --------- ___________________________________________________________ Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now. http://uk.answers.yahoo.com/

1 0

[Users] openser: Call workflow
by Helmut Kuper 31 May '07

31 May '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, is there a way in openser to get it work like this: 1. SIP-Request comes in 2. openser detects a special service for dialed number 3. openser sets that original sip session on hold and forwards the request to a remote service node 4. remote service node does it job and sends back a result message via network to openser 5. openser checks that result, get the session from hold and continues it's work on the session In the end I 'm looking for a way to let openser handles a sip session like a workflow, where I can inject some value added services by REMOTE service nodes (not by modules or plugins) without forwarding the complete session to a remote service node. I hope u understand what I mean. regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGXrWO4tZeNddg3dwRAueLAJ48xkexHAz3GCkzKeNuRewV1hsb3ACeIr7p LST+x5cMjAuIvbzZl61PPyk= =Ita4 -----END PGP SIGNATURE-----

2 1

[Serusers] SER Debug
by Cyprian Clement 31 May '07

31 May '07

Hi, Does any one know of a useful way of getting(turning on) SER debug report. I am trying to locate where my call is failing with the SER and currently use the "ngrep" but it does not seem to reveal much useful internal report. most of it looks external similar to ethereal. Will appreciate any share of info in this regard. Cyp. -------- ___________________________________________________________ Yahoo! Answers - Got a question? Someone out there knows the answer. Try it now. http://uk.answers.yahoo.com/

1 0

[Serusers] register my asterisk on ser
by flavio 31 May '07

31 May '07

Hi, I've asterisk and ser runnig onver same machine.Is it wrong? I'm trying to register asterisk on ser as UAC, but I've the follow log error message: ERROR: forward_reply: no 2nd via found in reply sip log with ngrep are soon reported: U 2007/05/31 11:52:48.261775 10.28.19.202:5060 -> 10.28.19.202:5060 REGISTER sip:10.28.19.202 SIP/2.0. Via: SIP/2.0/UDP 10.28.19.202:5060;branch=z9hG4bK7bd3439f. From: <sip:0192091221@10.28.19.202>;tag=as7b047b0b. To: <sip:0192091221@10.28.19.202>. Call-ID: 41a53c8a015e385f4b6d951f6a0e07a5(a)127.0.0.1. CSeq: 102 REGISTER. User-Agent: Asterisk PBX. Max-Forwards: 70. Expires: 300. Contact: <sip:2000@10.28.19.202>. Event: registration. Content-Length: 0. . # U 2007/05/31 11:52:48.262493 10.28.19.202:5060 -> 10.28.19.202:5060 SIP/2.0 100 Trying. Via: SIP/2.0/UDP 10.28.19.202:5060;branch=z9hG4bK7bd3439f. From: <sip:0192091221@10.28.19.202>;tag=as7b047b0b. To: <sip:0192091221@10.28.19.202>. Call-ID: 41a53c8a015e385f4b6d951f6a0e07a5(a)127.0.0.1. CSeq: 102 REGISTER. Server: Sip EXpress router (0.9.6 (i386/linux)). Content-Length: 0. Warning: 392 10.28.19.202:5060 "Noisy feedback tells: pid=7153 req_src_ip=10.28.19.202 req_src_port=5060 in_uri=sip:10.28.19.202 out_uri=sip:10.28.19.202 via_cnt==1". . # U 2007/05/31 11:52:48.263017 10.28.19.202:5060 -> 10.28.19.202:5060 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP 10.28.19.202:5060;branch=z9hG4bK7bd3439f. From: <sip:0192091221@10.28.19.202>;tag=as7b047b0b. To: <sip:0192091221@10.28.19.202>;tag=979d95a734c13f6db8b9e3a72b9f44a0.020d. Call-ID: 41a53c8a015e385f4b6d951f6a0e07a5(a)127.0.0.1. CSeq: 102 REGISTER. WWW-Authenticate: Digest realm="10.28.19.202", nonce="465eb83c86f495e14144d970e6bbabb7952b6579". Server: Sip EXpress router (0.9.6 (i386/linux)). Content-Length: 0. Warning: 392 10.28.19.202:5060 "Noisy feedback tells: pid=7153 req_src_ip=10.28.19.202 req_src_port=5060 in_uri=sip:10.28.19.202 out_uri=sip:10.28.19.202 via_cnt==1". Have you any suggestions? Thanks, F. -- ******************************** * (o< ing. Patria Flavio * //\ phone 0823451358 * V_/_ mobile 3407873357 * ********************************

2 1

Re: [Users] branch parameter in ACK set to zero?
by Bogdan-Andrei Iancu 31 May '07

31 May '07

Hi Tim, As I suspected, it is empty branch is triggered by a bogus SIP flow. The ACK generated by the caller device is bogus as the TO uri is different than the TO in INVITE. Also the caller device does use branch at all in VIA and forces openser to do pre-RFC3261 transaction matching with involves the TO uri. As the log show, the ACK does not match any transaction: DEBUG: t_lookup_request: start searching: hash=11223, isACK=1 DEBUG: proceeding to pre-RFC3261 transaction matching DEBUG: t_lookup_request: no transaction found So, the ACK is forwarded as stateless request - for this case, there is complicated alg for computing the branch param based on the branch params from the previous VIA headers. But the previous VIA is bogus (no branch at all) and openser finds itself in the impossibility to compute a branch for its VIA. regards, bogdan Tim Madorma wrote: > Hi Bogdan, > > Attached is the log and the openser.cfg file. > > thanks, > Tim > > On 5/30/07, Tim Madorma <tmadorma(a)gmail.com> wrote: >> Hi Bogdan, >> >> I have attached an html file that shows the call trace (note that the >> OpenSER is 65.185.232.62:5061in the flow). I will send the log file >> and openser.cfg in a separate email since it would put me over the 40K >> limit. >> >> thanks, >> Tim >> >> On 5/30/07, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> wrote: >> > Hi Tim, >> > >> > the VIA branch param must not be 0, indeed. Could you provide an >> network >> > trace for the entire call and the debug log for level 9? >> > >> > regards, >> > bogdan >> > >> > Tim Madorma wrote: >> > > Hi, >> > > >> > > In testing with OpenSER 1.2 I noticed that the branch parameter >> of the >> > > Via in the ACK to 200 OK has a value of zero. This does not seem >> > > right. From 16.6 of RFC-3261: >> > > >> > > The proxy MUST insert a Via header field value into the copy >> > > before the existing Via header field values. The >> construction >> > > of this value follows the same guidelines of Section >> 8.1.1.7. >> > > This implies that the proxy will compute its own branch >> > > parameter, which will be globally unique for that branch, >> and >> > > contain the requisite magic cookie. >> > > >> > > Please advise. >> > > >> > > thanks, >> > > Tim >> > > >> > > _______________________________________________ >> > > Users mailing list >> > > Users(a)openser.org >> > > http://openser.org/cgi-bin/mailman/listinfo/users >> > > >> > >> > >> >>

1 0

[Serusers] Ser in B2B UA Mode
by Gustavo Passos Tourinho 31 May '07

31 May '07

Hi, Can ser be used like a b2b ua? I mean, can it register in others proxies? Thank you. Regards, Gustavo

2 1

[Users] Replace destination URI (remove port 5062)
by Peter P GMX 31 May '07

31 May '07

I have set up an OpenSER to run on port 5062 instead of 5060. Attached to OpenSER I have 2 videoconferencing clients which communicate via SIP. What's working so far - internal client (registered on OpenSER) to another internal client (registered on OpenSER) - internal client (registered on OpenSER) to another external client - this all works with the OpenSER and other clients behind their NAT, as Mediaproxy is installed What is actually not working is - another external client connetcing to an internal client (registered on OpenSER) because I have to adress the the To:URI as sip.mydomain.com:5062. - Whenever an external INVITE comed in, it ends up with "message too big" because OpenSER is cycling through its routing plan until it adds that many via headers that the message increases 2kb. - what I see is that openser does not try to find the client on sip.mydomain.com, instead I feel that it tries to find the client on sip.mydomain.com:5062 as uri. - as my operating system (debian etch) cannot resolve this domain, this runs through the loop My question: - is the a way to modify the destinaton header ($tu) that the port is cut off (name@sip.mydomain.com:5062 ==> name(a)sip.mydomain.com)? Best regards peter

2 1

[Serusers] Call forward on no answer and busy failing
by Ranganath B 31 May '07

31 May '07

Hi, I could get the blind (unconditional) call forward option working with the configuration that is provided in the IPTEL website but using the same config file and the ideas provided I couldn't get the call forward on busy and no answer working. I get the following error in the /var/log/messages: May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: mk_proxy: could not resolve hostname: "ser.iptel.org" May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: uri2proxy: bad host name in URI <sip:1234@ser.iptel.org> May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: t_forward_nonack: failure to add branches May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: w_t_relay (failure mode): forwarding failed May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: error: mediaproxy/sendMediaproxyCommand(): can't connect to MediaProxy May 16 15:49:52 localhost /usr/local/sbin/ser[17563]: ERROR: sl_reply_error used: I'm terribly sorry, server error occurred (1/SL) It would be of great help if anybody provide me input on how to resolve this issue or a configuration file using which I can get the call forward on busy and no response working. BTW, I am using the ser verison: 0.9.6. I have populated an entry for call forward no answer/busy in the mysql database for the table "usr_preferences". Thanks in advance. Regards, Ranganath B

3 4

[Users] what algorithm does radiusclient-ng+openser use?(md5 or)
by Jason Ma 30 May '07

30 May '07

Hi All, I'm configuring radius support on openser using radiusclient-ng-0.5.5.1.tar.gz,and the radius server is Lucent AAA server,everytime openser sent the request to AAA server,the AAA server could not parse the request,the logs on AAA server is as below.I noticed that the the server said it was "Unsupported algorithm",and the algorithm was null,I'm wandering what kind of algorithm does radiusclient-ng use?MD5 or HA1......... Please help ! Thanks in advance. ~~~~~~~~~~~~~~~~~~~~~~~ 2007/05/29 16:51:45.685 <engine.item.setup> Initializing Radius Item: 192.168.1.42:33345->0.0.0.0:1812(77) 0 <engine.item.setup> Using dictionary: draft-sterman-aaa-sip-01 0 <engine.item.setup> Request decode: User-Name = "21230001(a)192.168.1.42" Digest-Attributes = User-Name = "21230001" Digest-Attributes = Realm = "192.168.1.42" Digest-Attributes = Nonce = "465c49b766fa11f4a9db29977bf16857d3372780" Digest-Attributes = URI = "sip:192.168.1.42" Digest-Attributes = Method = "REGISTER" Digest-Response = "689a0f89cd73751f61b12d04f585a224" Service-Type = IAPP-Register Anonymous = v0-a208-3231323330303031 NAS-Port = 5060 NAS-IP-Address = 192.168.1.42 0 <engine.item.setup> User-Name parsed: Base-User-Name = "21230001", User-Realm = "192.168.1.42" 0 <engine.item.setup> Item setup complete 0 <engine.worker.1> <setup> ==> ReadUserFile.auth:readUserFile 0 <plugin.ReadUserFile.auth:readUserFile> searchValue = ' 21230001(a)192.168.1.42'. 0 <plugin.ReadUserFile.auth:readUserFile> Found entry: 21230001(a)192.168.1.42 0 <plugin.ReadUserFile.auth:readUserFile> Check items for found entry: User-Password = <hidden> Auth-Type = Local 0 <plugin.ReadUserFile.auth:readUserFile> Reply items for found entry: 0 <plugin.ReadUserFile.auth:readUserFile> SUCCESS -- Read User 21230001(a)192.168.1.42 0 <engine.worker.1> ReadUserFile.auth:readUserFile ==> AuthHttpDigest.auth:checkDigest by SUCCESS -- Read User 21230001(a)192.168.1.42 0 <plugin.AuthHttpDigest.auth:checkDigest> response = 689a0f89cd73751f61b12d04f585a224 0 <plugin.AuthHttpDigest.auth:checkDigest> realm = 192.168.1.42 0 <plugin.AuthHttpDigest.auth:checkDigest> nonce = 465c49b766fa11f4a9db29977bf16857d3372780 0 <plugin.AuthHttpDigest.auth:checkDigest> method = REGISTER 0 <plugin.AuthHttpDigest.auth:checkDigest> uri = sip:192.168.1.42 0 <plugin.AuthHttpDigest.auth:checkDigest> qop = 0 <plugin.AuthHttpDigest.auth:checkDigest> algorithm = 0 <plugin.AuthHttpDigest.auth:checkDigest> entityBodyHash = 0 <plugin.AuthHttpDigest.auth:checkDigest> cNonce = 0 <plugin.AuthHttpDigest.auth:checkDigest> nonceCount = 0 <plugin.AuthHttpDigest.auth:checkDigest> username = 21230001 0 <plugin.AuthHttpDigest.auth:checkDigest> ERROR -- Error generating HTTP digest: java.io.IOException: Unsupported algorithm: : java.io.IOException: Unsupported algorithm: 1 <engine.worker.1> AuthHttpDigest.auth:checkDigest ==> End-Of-Methods by ERROR -- Error generating HTTP digest: java.io.IOException: Unsupported algorithm: 1 <engine.worker.1> 21230001(a)192.168.1.42 login discarded due to Error generating HTTP digest: java.io.IOException: Unsupported algorithm: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

2 3

[Users] branch parameter in ACK set to zero?
by Tim Madorma 30 May '07

30 May '07

Hi, In testing with OpenSER 1.2 I noticed that the branch parameter of the Via in the ACK to 200 OK has a value of zero. This does not seem right. From 16.6 of RFC-3261: The proxy MUST insert a Via header field value into the copy before the existing Via header field values. The construction of this value follows the same guidelines of Section 8.1.1.7. This implies that the proxy will compute its own branch parameter, which will be globally unique for that branch, and contain the requisite magic cookie. Please advise. thanks, Tim

3 4

[Serusers] SER 2.0.0 RC 1 won't start on Fedora 6
by Umer Waqar 30 May '07

30 May '07

Hi, I downloaded the source and compiled SER 2.0.0 RC 1 as per instructions on http://www.iptel.org/ser_2_0_0_release_candidate_1 I get an error when try to check it with 'sercmd' and also can't see the ser process running Rgrds, Umer [root@umer ~]# /usr/local/sbin/ser Listening on udp: 192.168.1.103 [192.168.1.103]:5060 tcp: 192.168.1.103 [192.168.1.103]:5060 Aliases: tcp: phone03.tb.jasomi.com:5060 udp: phone03.tb.jasomi.com:5060 *: umer-sip.jasomi.com:* [root@umer ~]# /usr/local/sbin/sercmd ERROR: connect_unix_sock: connect(/tmp/ser_ctl): No such file or directory [2] [root@umer ~]# ps -A | grep ser 135 ? 00:00:00 kseriod 4931 ? 00:00:00 gam_server

2 1

[Serusers] SER as a boundary proxy - how to force routing?
by tzieleniewski 30 May '07

30 May '07

Hi, I have the following situation. I have one SER instance with public IP and LAN working as a boundary proxy. (its only role is to filter the traffic and authorize users) on the LAN side I have another SER instance with works as registrar and local sip proxy. How can I force the second proxy this in the LAN network to route the messages to the boundary proxy(no matter what transport is used). The best solution would be to route them only when the calls are made to the users which are localized outside the local LAN on the public NET. Thank You In advanced Cheers Tomasz

1 0

RE: [Users] BUG: qm_free ?
by Papadopoulos Georgios 30 May '07

30 May '07

No, I don't use t_newtran at all. Now I am trying to get this to happen again but no luck... Anyway, is it something to worry about or will the leaked transactions be cleaned up? Regards, George ps. I cannot connect to the SVN, is it down? > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Wednesday, May 30, 2007 4:33 PM > To: Papadopoulos Georgios > Cc: Klaus Darilion; users(a)openser.org > Subject: Re: [Users] BUG: qm_free ? > > Perfect - thanks for testing - I applied the fix also on 1.2. > > regarding the Warning message: there were in 1.2 some fixes > related to detection of the transactions leak due scripting > issues. Probably 1.1 was not able to detect and report all cases. > > Do you use in your script t_newtran() function? typically, > when you use this function without terminating the > transaction (relay or reply in a stateful way), you will get > the warning. can you check this on your script? > > regards, > bogdan > > Papadopoulos Georgios wrote: > > Solved! Thank you! > > However, before applying the patch, I increased private > memory to 2MB > > and it did not crash. Then I set it back to 1MB, applied > the patch and > > it worked. > > > > Now I have a ton of these messages: > > WARNING: script writer didn't release transaction What does > it mean? > > This was not present in 1.1 and my config script has not changed > > (except for the necessary changes for the migration) > > > > Regards > > > > George > > > > > > > > > > > >> -----Original Message----- > >> From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >> Sent: Wednesday, May 30, 2007 2:18 PM > >> To: Papadopoulos Georgios > >> Cc: Klaus Darilion; users(a)openser.org > >> Subject: Re: [Users] BUG: qm_free ? > >> > >> Hi George, > >> > >> I managed to find the bug without the backtrace. I applied > a fix for > >> development version (SVN trunk) and find attached a patch > for 1.2 - > >> could you please give it a try and see if it solves the bug? > >> > >> thanks and regards, > >> bogdan > >> > >> Papadopoulos Georgios wrote: > >> > >>> I cannot find a core file anywhere. Where should it be? I can > >>> reproduce the problem very easily, so please give me more > >>> > >> instructions > >> > >>> on how to get the coredump+backtrace that you need. > >>> > >>> thank you > >>> > >>> George > >>> > >>> > >>> > >>> > >>>> -----Original Message----- > >>>> From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > >>>> Sent: Tuesday, May 29, 2007 8:34 PM > >>>> To: Papadopoulos Georgios > >>>> Cc: users(a)openser.org > >>>> Subject: Re: [Users] BUG: qm_free ? > >>>> > >>>> Maybe a bug? > >>>> > >>>> Can you provide a coredump+backtrace? I'm sure Bogdan or > >>>> > >> Daniel will > >> > >>>> take a look at it. > >>>> > >>>> regards > >>>> klaus > >>>> > >>>> Papadopoulos Georgios wrote: > >>>> > >>>> > >>>>> Hi Klaus, > >>>>> > >>>>> It crashes immediately, I have no time to do anything. I > >>>>> > >>>>> > >>>> tried again > >>>> > >>>> > >>>>> and I increased the log level. So now it is process 692. > >>>>> > >>>>> > >>>> Here is part > >>>> > >>>> > >>>>> of the output. I can send you the whole output if that helps. > >>>>> > >>>>> thank you > >>>>> > >>>>> George > >>>>> > >>>>> > >>>>> 16(692) DEBUG: timer routine:5,tl=0xb61abdc4 next=0xb61adfd8, > >>>>> timeout=3000000 > >>>>> 16(692) DEBUG: retransmission_handler : request resending > >>>>> (t=0xb61abc78, REGISTER ... ) > >>>>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000 > >>>>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61abdc4 (6000000) > >>>>> 16(692) DEBUG: retransmission_handler : done > >>>>> 16(692) DEBUG: timer routine:5,tl=0xb61adfd8 next=(nil), > >>>>> timeout=3000000 > >>>>> 16(692) DEBUG: retransmission_handler : request resending > >>>>> (t=0xb61ade8c, REGISTER ... ) > >>>>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000 > >>>>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61adfd8 (6000000) > >>>>> 16(692) DEBUG: retransmission_handler : done > >>>>> 16(692) DEBUG: timer routine:0,tl=0xb6182810 next=0xb61845ac, > >>>>> timeout=3 > >>>>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL > >>>>> (0xb61826a8) > >>>>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408 > >>>>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408 > >>>>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover > >>>>> > >>>>> > >>>> test: branch=0, > >>>> > >>>> > >>>>> last_recv=408, flags=0 > >>>>> 16(692) DEBUG:tm:t_should_relay_response: trying > >>>>> > >> DNS-based failover > >> > >>>>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c: > >>>>> add_rule_to_list(377) > >>>>> 16(692) qm_malloc(0xb5f99000, 72) returns address > 0xb6278238 frag. > >>>>> 0xb6278220 (size=72) on 1 -th hit > >>>>> 16(692) DBG:add_list_to_head: adding to bl dns > >>>>> > >> 0xb6278238,0xb6278238 > >> > >>>>> 16(692) DEBUG:tm:local_reply: branch=0, save=0, winner=0 > >>>>> 16(692) DEBUG:tm:local_reply: local transaction completed > >>>>> 16(692) DEBUG: add_to_tail_of_timer[2]: 0xb61826f0 (8) > >>>>> 16(692) DEBUG: final_response_handler : done > >>>>> 16(692) DEBUG: timer routine:0,tl=0xb61845ac next=0xb6186c6c, > >>>>> timeout=3 > >>>>> 16(692) DEBUG: timer routine:0,tl=0xb6186c6c next=0xb6188d98, > >>>>> timeout=3 > >>>>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL > >>>>> (0xb6186b04) > >>>>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408 > >>>>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408 > >>>>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover > >>>>> > >>>>> > >>>> test: branch=0, > >>>> > >>>> > >>>>> last_recv=408, flags=0 > >>>>> 16(692) DEBUG:tm:t_should_relay_response: trying > >>>>> > >> DNS-based failover > >> > >>>>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c: > >>>>> add_rule_to_list(377) > >>>>> 16(692) qm_malloc(0xb5f99000, 72) returns address > 0xb62782b0 frag. > >>>>> 0xb6278298 (size=72) on 1 -th hit > >>>>> 16(692) DBG:add_list_to_head: adding to bl dns > >>>>> > >> 0xb62782b0,0xb62782b0 > >> > >>>>> 16(692) qm_free(0x8151c40, 0xb62782b0), called from > blacklists.c: > >>>>> rm_dups(440) > >>>>> 16(692) BUG: qm_free: bad pointer 0xb62782b0 (out of memory > >>>>> > >>>>> > >>>> block!) - > >>>> > >>>> > >>>>> aborting > >>>>> > >>>>> > >>>>> > >>>>>> -----Original Message----- > >>>>>> From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > >>>>>> Sent: Tuesday, May 29, 2007 5:48 PM > >>>>>> To: Papadopoulos Georgios > >>>>>> Cc: users(a)openser.org > >>>>>> Subject: Re: [Users] BUG: qm_free ? > >>>>>> > >>>>>> The bug was in process 32133 > >>>>>> > >>>>>> There are no log statements from this process. What what this > >>>>>> process? > >>>>>> (use "openserctl ps" to see the PIDs of the processes) > >>>>>> > >>>>>> regards > >>>>>> klaus > >>>>>> > >>>>>> Papadopoulos Georgios wrote: > >>>>>> > >>>>>> > >>>>>>> Hello all, > >>>>>>> > >>>>>>> I am having some trouble geting Openser 1.2 to work. It > >>>>>>> > >>>>>>> > >>>>>> crashes pretty > >>>>>> > >>>>>> > >>>>>>> much immediately. I have tried it successfully on a test > >>>>>>> > >>>>>>> > >>>>>> system but as > >>>>>> > >>>>>> > >>>>>>> soon as I start it in the production environment, it > >>>>>>> > >>>>>>> > >>>>>> crashes. Any ideas? > >>>>>> > >>>>>> > >>>>>>> > >>>>>>> Thank you for any help. > >>>>>>> > >>>>>>> George > >>>>>>> > >>>>>>> > >>>>>>> 0(0) INFO: statistics manager successfully initialized > >>>>>>> 0(0) StateLess module - initializing > >>>>>>> 0(0) TM - initializing... > >>>>>>> 0(0) Maxfwd module- initializing > >>>>>>> 0(0) INFO:ul_init_locks: locks array size 512 > >>>>>>> 0(0) TextOPS - initializing > >>>>>>> 0(0) AVPops - initializing > >>>>>>> 0(0) permissions - initializing > >>>>>>> 0(0) WARNING: File not found: > >>>>>>> > >>>>>>> > >>>>>> /root/openser/config/permissions.allow > >>>>>> > >>>>>> > >>>>>>> 0(0) Default allow file > >>>>>>> > >>>>>>> > >>>>>> (/root/openser/config/permissions.allow) not > >>>>>> > >>>>>> > >>>>>>> found => empty rule set > >>>>>>> 0(0) WARNING: File not found: > >>>>>>> > >>>>>>> > >>>> /root/openser/config/permissions.deny > >>>> > >>>> > >>>>>>> 0(0) Default deny file > >>>>>>> > >>>>>>> > >>>> (/root/openser/config/permissions.deny) not > >>>> > >>>> > >>>>>>> found => empty rule set > >>>>>>> 0(0) AUTH module - initializing > >>>>>>> 0(0) AUTH_DB module - initializing > >>>>>>> 0(0) ACC - initializing > >>>>>>> 0(0) INFO:xl_parse_name: using hdr type (4) instead of <From> > >>>>>>> 0(0) INFO:xl_parse_name: using hdr type (3) instead of <To> > >>>>>>> 0(0) INFO:textops:hname_fixup: using hdr type name <Nat-flag> > >>>>>>> 0(0) INFO:textops:hname_fixup: using hdr type (31) > instead of > >>>>>>> <Remote-Party-ID> > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>>>> 1(32087) INFO:mi_fifo:mi_child_init(1): extra fifo > >>>>>>> > >>>>>>> > >>>>>> listener processes > >>>>>> > >>>>>> > >>>>>>> created > >>>>>>> 2(32093) pre_auth(): Credentials received are not > >>>>>>> > >> filled properly > >> > >>>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>>>> > >>>>>>> > >>>>>> header in > >>>>>> > >>>>>> > >>>>>>> state 22 > >>>>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>>>> 1(32087) ERROR: bad header field > >>>>>>> 1(32087) ERROR:maxfwd:is_maxfwd_present : parsing > >>>>>>> > >>>>>>> > >>>>>> MAX_FORWARD header > >>>>>> > >>>>>> > >>>>>>> failed! > >>>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>>>> > >>>>>>> > >>>>>> header in > >>>>>> > >>>>>> > >>>>>>> state 22 > >>>>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>>>> 1(32087) ERROR: bad header field > >>>>>>> 1(32087) find_first_route: Error while parsing headers > >>>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>>>> > >>>>>>> > >>>>>> header in > >>>>>> > >>>>>> > >>>>>>> state 22 > >>>>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>>>> 1(32087) ERROR: bad header field > >>>>>>> 1(32087) find_credentials(): Error while parsing headers > >>>>>>> 1(32087) pre_auth(): Error while looking for credentials > >>>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>>>> > >>>>>>> > >>>>>> header in > >>>>>> > >>>>>> > >>>>>>> state 22 > >>>>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>>>> 1(32087) ERROR: bad header field > >>>>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>>>> > >>>>>>> > >>>>>> header in > >>>>>> > >>>>>> > >>>>>>> state 22 > >>>>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>>>> 1(32087) ERROR: bad header field > >>>>>>> 1(32087) ERROR: build_res_buf_from_sip_req: alas, > >>>>>>> > >> parse_headers > >> > >>>>>>> failed > >>>>>>> 1(32087) pre_auth(): Error while sending 400 reply > >>>>>>> INFO: started (pid: 32073) > >>>>>>> [root@ser1 sbin]# 1(32087) pre_auth(): Credentials > >>>>>>> > >>>>>>> > >>>>>> received are not > >>>>>> > >>>>>> > >>>>>>> filled properly > >>>>>>> 16(32133) BUG: qm_free: bad pointer 0xb648f38c (out of > >>>>>>> > >>>>>>> > >>>>>> memory block!) > >>>>>> > >>>>>> > >>>>>>> - aborting > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) ERROR: parse_via: invalid char <=> in state 201 > >>>>>>> 3(32096) error: parse_via_param > >>>>>>> 3(32096) ERROR: parse_via on: <SIP/2.0/UDP > >>>>>>> 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport > >>>>>>> From: <sip:gdt@sip.i-call.gr>;tag=as52e610af > >>>>>>> To: <sip:gdt@sip.i-call.gr> > >>>>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e(a)gdt.ath.cx > >>>>>>> <mailto:1b7dabcf26487db47f520b5c7195958e@gdt.ath.cx> > >>>>>>> CSeq: 4471 REGISTER > >>>>>>> User-Agent: Asterisk PBX > >>>>>>> Max-Forwards: 70 > >>>>>>> Expires: 120 > >>>>>>> Contact: <sip:s@87.202.97.60:59945> > >>>>>>> Event: registration > >>>>>>> Content-Length: 0 > >>>>>>> > >>>>>>> 3(32096) ERROR: parse_via parse error, parsed so > >>>>>>> > >>>>>>> > >>>> far:<SIP/2.0/UDP > >>>> > >>>> > >>>>>>> 87.202.97.60:59945;branc=> > >>>>>>> 3(32096) ERROR: get_hdr_field: bad via > >>>>>>> 3(32096) ERROR: bad header field > >>>>>>> 3(32096) ERROR: parse_msg: message=<REGISTER > sip:sip.i-call.gr > >>>>>>> SIP/2.0 > >>>>>>> Via: SIP/2.0/UDP > 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport > >>>>>>> From: <sip:gdt@sip.i-call.gr>;tag=as52e610af > >>>>>>> To: <sip:gdt@sip.i-call.gr> > >>>>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e(a)gdt.ath.cx > >>>>>>> CSeq: 4471 REGISTER > >>>>>>> User-Agent: Asterisk PBX > >>>>>>> Max-Forwards: 70 > >>>>>>> Expires: 120 > >>>>>>> Contact: <sip:s@87.202.97.60:59945> > >>>>>>> Event: registration > >>>>>>> Content-Length: 0 > >>>>>>> > >>>>>>> 3(32096) ERROR: receive_msg: parse_msg failed > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>>>> 0(32073) child process 32133 exited by a signal 6 > >>>>>>> 0(32073) core was generated > >>>>>>> 0(32073) INFO: terminating due to SIGCHLD > >>>>>>> 1(32087) INFO: signal 15 received > >>>>>>> 2(32093) INFO: signal 15 received > >>>>>>> 3(32096) INFO: signal 15 received > >>>>>>> 5(32102) INFO: signal 15 received > >>>>>>> 6(32103) INFO: signal 15 received > >>>>>>> 13(32123) INFO: signal 15 received > >>>>>>> 14(32127) INFO: signal 15 received > >>>>>>> 15(32130) INFO: signal 15 received > >>>>>>> 1(32087) 4(32099) 7(32104) INFO: signal 15 received > >>>>>>> 8(32109) INFO: signal 15 received > >>>>>>> 9(32112) INFO: signal 15 received > >>>>>>> 10(32115) INFO: signal 15 received > >>>>>>> 11(32118) INFO: signal 15 received > >>>>>>> 12(32121) INFO: signal 15 received > >>>>>>> INFO: signal 15 received > >>>>>>> INFO: signal 15 received > >>>>>>> 0(32073) INFO:mi_fifo:mi_destroy: seems that fifo child > >>>>>>> > >>>>>>> > >>>> is already > >>>> > >>>> > >>>>>>> dead! > >>>>>>> > >>>>>>> > >>>>>>> > >>>>>>> Disclaimer > >>>>>>> The information in this e-mail and any attachments is > >>>>>>> > >>>>>>> > >>>>>> confidential. It is intended solely for the attention and > >>>>>> > >>>>>> > >>>> use of the > >>>> > >>>> > >>>>>> named addressee(s). If you are not the intended recipient, > >>>>>> > >>>>>> > >>>> or person > >>>> > >>>> > >>>>>> responsible for delivering this information to the intended > >>>>>> recipient, please notify the sender immediately. Unless > >>>>>> > >>>>>> > >>>> you are the > >>>> > >>>> > >>>>>> intended recipient or his/her representative you are not > >>>>>> > >>>>>> > >>>> authorized > >>>> > >>>> > >>>>>> to, and must not, read, copy, distribute, use or retain > >>>>>> > >>>>>> > >>>> this message > >>>> > >>>> > >>>>>> or any part of it. E-mail transmission cannot be > >>>>>> > >> guaranteed to be > >> > >>>>>> secure or error-free as information could be intercepted, > >>>>>> > >>>>>> > >>>> corrupted, > >>>> > >>>> > >>>>>> lost, destroyed, arrive late or incomplete, or contain viruses. > >>>>>> > >>>>>> > >>>>>>> > >>>>>>> > >> > --------------------------------------------------------------------- > >> > >>>> > >>>> > >>>>>> - > >>>>>> > >>>>>> > >>>>>>> -- > >>>>>>> > >>>>>>> _______________________________________________ > >>>>>>> Users mailing list > >>>>>>> Users(a)openser.org > >>>>>>> http://openser.org/cgi-bin/mailman/listinfo/users > >>>>>>> > >>>>>>> > >>> _______________________________________________ > >>> Users mailing list > >>> Users(a)openser.org > >>> http://openser.org/cgi-bin/mailman/listinfo/users > >>> > >>> > >>> > >> > > > > > >

2 1

RE: [Users] BUG: qm_free ?
by Papadopoulos Georgios 30 May '07

30 May '07

Solved! Thank you! However, before applying the patch, I increased private memory to 2MB and it did not crash. Then I set it back to 1MB, applied the patch and it worked. Now I have a ton of these messages: WARNING: script writer didn't release transaction What does it mean? This was not present in 1.1 and my config script has not changed (except for the necessary changes for the migration) Regards George > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Wednesday, May 30, 2007 2:18 PM > To: Papadopoulos Georgios > Cc: Klaus Darilion; users(a)openser.org > Subject: Re: [Users] BUG: qm_free ? > > Hi George, > > I managed to find the bug without the backtrace. I applied a > fix for development version (SVN trunk) and find attached a > patch for 1.2 - could you please give it a try and see if it > solves the bug? > > thanks and regards, > bogdan > > Papadopoulos Georgios wrote: > > I cannot find a core file anywhere. Where should it be? I can > > reproduce the problem very easily, so please give me more > instructions > > on how to get the coredump+backtrace that you need. > > > > thank you > > > > George > > > > > > > >> -----Original Message----- > >> From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > >> Sent: Tuesday, May 29, 2007 8:34 PM > >> To: Papadopoulos Georgios > >> Cc: users(a)openser.org > >> Subject: Re: [Users] BUG: qm_free ? > >> > >> Maybe a bug? > >> > >> Can you provide a coredump+backtrace? I'm sure Bogdan or > Daniel will > >> take a look at it. > >> > >> regards > >> klaus > >> > >> Papadopoulos Georgios wrote: > >> > >>> Hi Klaus, > >>> > >>> It crashes immediately, I have no time to do anything. I > >>> > >> tried again > >> > >>> and I increased the log level. So now it is process 692. > >>> > >> Here is part > >> > >>> of the output. I can send you the whole output if that helps. > >>> > >>> thank you > >>> > >>> George > >>> > >>> > >>> 16(692) DEBUG: timer routine:5,tl=0xb61abdc4 next=0xb61adfd8, > >>> timeout=3000000 > >>> 16(692) DEBUG: retransmission_handler : request resending > >>> (t=0xb61abc78, REGISTER ... ) > >>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000 > >>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61abdc4 (6000000) > >>> 16(692) DEBUG: retransmission_handler : done > >>> 16(692) DEBUG: timer routine:5,tl=0xb61adfd8 next=(nil), > >>> timeout=3000000 > >>> 16(692) DEBUG: retransmission_handler : request resending > >>> (t=0xb61ade8c, REGISTER ... ) > >>> 16(692) DEBUG:tm:set_timer: relative timeout is 3000000 > >>> 16(692) DEBUG: add_to_tail_of_timer[6]: 0xb61adfd8 (6000000) > >>> 16(692) DEBUG: retransmission_handler : done > >>> 16(692) DEBUG: timer routine:0,tl=0xb6182810 next=0xb61845ac, > >>> timeout=3 > >>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL > >>> (0xb61826a8) > >>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408 > >>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408 > >>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover > >>> > >> test: branch=0, > >> > >>> last_recv=408, flags=0 > >>> 16(692) DEBUG:tm:t_should_relay_response: trying > DNS-based failover > >>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c: > >>> add_rule_to_list(377) > >>> 16(692) qm_malloc(0xb5f99000, 72) returns address 0xb6278238 frag. > >>> 0xb6278220 (size=72) on 1 -th hit > >>> 16(692) DBG:add_list_to_head: adding to bl dns > 0xb6278238,0xb6278238 > >>> 16(692) DEBUG:tm:local_reply: branch=0, save=0, winner=0 > >>> 16(692) DEBUG:tm:local_reply: local transaction completed > >>> 16(692) DEBUG: add_to_tail_of_timer[2]: 0xb61826f0 (8) > >>> 16(692) DEBUG: final_response_handler : done > >>> 16(692) DEBUG: timer routine:0,tl=0xb61845ac next=0xb6186c6c, > >>> timeout=3 > >>> 16(692) DEBUG: timer routine:0,tl=0xb6186c6c next=0xb6188d98, > >>> timeout=3 > >>> 16(692) DEBUG: final_response_handler:stop retr. and send CANCEL > >>> (0xb6186b04) > >>> 16(692) DEBUG:tm:t_should_relay_response: T_code=0, new_code=408 > >>> 16(692) DEBUG:tm:t_pick_branch: picked branch 0, code 408 > >>> 16(692) DEBUG:tm:t_should_relay_response: dns-failover > >>> > >> test: branch=0, > >> > >>> last_recv=408, flags=0 > >>> 16(692) DEBUG:tm:t_should_relay_response: trying > DNS-based failover > >>> 16(692) qm_malloc(0xb5f99000, 72) called from blacklists.c: > >>> add_rule_to_list(377) > >>> 16(692) qm_malloc(0xb5f99000, 72) returns address 0xb62782b0 frag. > >>> 0xb6278298 (size=72) on 1 -th hit > >>> 16(692) DBG:add_list_to_head: adding to bl dns > 0xb62782b0,0xb62782b0 > >>> 16(692) qm_free(0x8151c40, 0xb62782b0), called from blacklists.c: > >>> rm_dups(440) > >>> 16(692) BUG: qm_free: bad pointer 0xb62782b0 (out of memory > >>> > >> block!) - > >> > >>> aborting > >>> > >>> > >>>> -----Original Message----- > >>>> From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > >>>> Sent: Tuesday, May 29, 2007 5:48 PM > >>>> To: Papadopoulos Georgios > >>>> Cc: users(a)openser.org > >>>> Subject: Re: [Users] BUG: qm_free ? > >>>> > >>>> The bug was in process 32133 > >>>> > >>>> There are no log statements from this process. What what this > >>>> process? > >>>> (use "openserctl ps" to see the PIDs of the processes) > >>>> > >>>> regards > >>>> klaus > >>>> > >>>> Papadopoulos Georgios wrote: > >>>> > >>>>> Hello all, > >>>>> > >>>>> I am having some trouble geting Openser 1.2 to work. It > >>>>> > >>>> crashes pretty > >>>> > >>>>> much immediately. I have tried it successfully on a test > >>>>> > >>>> system but as > >>>> > >>>>> soon as I start it in the production environment, it > >>>>> > >>>> crashes. Any ideas? > >>>> > >>>>> > >>>>> Thank you for any help. > >>>>> > >>>>> George > >>>>> > >>>>> > >>>>> 0(0) INFO: statistics manager successfully initialized > >>>>> 0(0) StateLess module - initializing > >>>>> 0(0) TM - initializing... > >>>>> 0(0) Maxfwd module- initializing > >>>>> 0(0) INFO:ul_init_locks: locks array size 512 > >>>>> 0(0) TextOPS - initializing > >>>>> 0(0) AVPops - initializing > >>>>> 0(0) permissions - initializing > >>>>> 0(0) WARNING: File not found: > >>>>> > >>>> /root/openser/config/permissions.allow > >>>> > >>>>> 0(0) Default allow file > >>>>> > >>>> (/root/openser/config/permissions.allow) not > >>>> > >>>>> found => empty rule set > >>>>> 0(0) WARNING: File not found: > >>>>> > >> /root/openser/config/permissions.deny > >> > >>>>> 0(0) Default deny file > >>>>> > >> (/root/openser/config/permissions.deny) not > >> > >>>>> found => empty rule set > >>>>> 0(0) AUTH module - initializing > >>>>> 0(0) AUTH_DB module - initializing > >>>>> 0(0) ACC - initializing > >>>>> 0(0) INFO:xl_parse_name: using hdr type (4) instead of <From> > >>>>> 0(0) INFO:xl_parse_name: using hdr type (3) instead of <To> > >>>>> 0(0) INFO:textops:hname_fixup: using hdr type name <Nat-flag> > >>>>> 0(0) INFO:textops:hname_fixup: using hdr type (31) instead of > >>>>> <Remote-Party-ID> > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 > >>>>> 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 > >>>>> 1(32087) INFO:mi_fifo:mi_child_init(1): extra fifo > >>>>> > >>>> listener processes > >>>> > >>>>> created > >>>>> 2(32093) pre_auth(): Credentials received are not > filled properly > >>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>> > >>>> header in > >>>> > >>>>> state 22 > >>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>> 1(32087) ERROR: bad header field > >>>>> 1(32087) ERROR:maxfwd:is_maxfwd_present : parsing > >>>>> > >>>> MAX_FORWARD header > >>>> > >>>>> failed! > >>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>> > >>>> header in > >>>> > >>>>> state 22 > >>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>> 1(32087) ERROR: bad header field > >>>>> 1(32087) find_first_route: Error while parsing headers > >>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>> > >>>> header in > >>>> > >>>>> state 22 > >>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>> 1(32087) ERROR: bad header field > >>>>> 1(32087) find_credentials(): Error while parsing headers > >>>>> 1(32087) pre_auth(): Error while looking for credentials > >>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>> > >>>> header in > >>>> > >>>>> state 22 > >>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>> 1(32087) ERROR: bad header field > >>>>> 1(32087) ERROR: parse_to_param: spitting out [<] in status 22 > >>>>> 1(32087) ERROR: parse_to: invalid To - unexpected end of > >>>>> > >>>> header in > >>>> > >>>>> state 22 > >>>>> 1(32087) ERROR: get_hdr_field: bad to header > >>>>> 1(32087) ERROR: bad header field > >>>>> 1(32087) ERROR: build_res_buf_from_sip_req: alas, > parse_headers > >>>>> failed > >>>>> 1(32087) pre_auth(): Error while sending 400 reply > >>>>> INFO: started (pid: 32073) > >>>>> [root@ser1 sbin]# 1(32087) pre_auth(): Credentials > >>>>> > >>>> received are not > >>>> > >>>>> filled properly > >>>>> 16(32133) BUG: qm_free: bad pointer 0xb648f38c (out of > >>>>> > >>>> memory block!) > >>>> > >>>>> - aborting > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 3(32096) ERROR: parse_via: invalid char <=> in state 201 > >>>>> 3(32096) error: parse_via_param > >>>>> 3(32096) ERROR: parse_via on: <SIP/2.0/UDP > >>>>> 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport > >>>>> From: <sip:gdt@sip.i-call.gr>;tag=as52e610af > >>>>> To: <sip:gdt@sip.i-call.gr> > >>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e(a)gdt.ath.cx > >>>>> <mailto:1b7dabcf26487db47f520b5c7195958e@gdt.ath.cx> > >>>>> CSeq: 4471 REGISTER > >>>>> User-Agent: Asterisk PBX > >>>>> Max-Forwards: 70 > >>>>> Expires: 120 > >>>>> Contact: <sip:s@87.202.97.60:59945> > >>>>> Event: registration > >>>>> Content-Length: 0 > >>>>> > >>>>> 3(32096) ERROR: parse_via parse error, parsed so > >>>>> > >> far:<SIP/2.0/UDP > >> > >>>>> 87.202.97.60:59945;branc=> > >>>>> 3(32096) ERROR: get_hdr_field: bad via > >>>>> 3(32096) ERROR: bad header field > >>>>> 3(32096) ERROR: parse_msg: message=<REGISTER sip:sip.i-call.gr > >>>>> SIP/2.0 > >>>>> Via: SIP/2.0/UDP 87.202.97.60:59945;branc==z9hG4bK2e302aa9;rport > >>>>> From: <sip:gdt@sip.i-call.gr>;tag=as52e610af > >>>>> To: <sip:gdt@sip.i-call.gr> > >>>>> Call-ID: 1b7dabcf26487db47f520b5c7195958e(a)gdt.ath.cx > >>>>> CSeq: 4471 REGISTER > >>>>> User-Agent: Asterisk PBX > >>>>> Max-Forwards: 70 > >>>>> Expires: 120 > >>>>> Contact: <sip:s@87.202.97.60:59945> > >>>>> Event: registration > >>>>> Content-Length: 0 > >>>>> > >>>>> 3(32096) ERROR: receive_msg: parse_msg failed > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 3(32096) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 1(32087) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 2(32093) WARNING: script writer didn't release transaction > >>>>> 0(32073) child process 32133 exited by a signal 6 > >>>>> 0(32073) core was generated > >>>>> 0(32073) INFO: terminating due to SIGCHLD > >>>>> 1(32087) INFO: signal 15 received > >>>>> 2(32093) INFO: signal 15 received > >>>>> 3(32096) INFO: signal 15 received > >>>>> 5(32102) INFO: signal 15 received > >>>>> 6(32103) INFO: signal 15 received > >>>>> 13(32123) INFO: signal 15 received > >>>>> 14(32127) INFO: signal 15 received > >>>>> 15(32130) INFO: signal 15 received > >>>>> 1(32087) 4(32099) 7(32104) INFO: signal 15 received > >>>>> 8(32109) INFO: signal 15 received > >>>>> 9(32112) INFO: signal 15 received > >>>>> 10(32115) INFO: signal 15 received > >>>>> 11(32118) INFO: signal 15 received > >>>>> 12(32121) INFO: signal 15 received > >>>>> INFO: signal 15 received > >>>>> INFO: signal 15 received > >>>>> 0(32073) INFO:mi_fifo:mi_destroy: seems that fifo child > >>>>> > >> is already > >> > >>>>> dead! > >>>>> > >>>>> > >>>>> > >>>>> Disclaimer > >>>>> The information in this e-mail and any attachments is > >>>>> > >>>> confidential. It is intended solely for the attention and > >>>> > >> use of the > >> > >>>> named addressee(s). If you are not the intended recipient, > >>>> > >> or person > >> > >>>> responsible for delivering this information to the intended > >>>> recipient, please notify the sender immediately. Unless > >>>> > >> you are the > >> > >>>> intended recipient or his/her representative you are not > >>>> > >> authorized > >> > >>>> to, and must not, read, copy, distribute, use or retain > >>>> > >> this message > >> > >>>> or any part of it. E-mail transmission cannot be > guaranteed to be > >>>> secure or error-free as information could be intercepted, > >>>> > >> corrupted, > >> > >>>> lost, destroyed, arrive late or incomplete, or contain viruses. > >>>> > >>>>> > >>>>> > >>>>> > >> > --------------------------------------------------------------------- > >> > >>>> - > >>>> > >>>>> -- > >>>>> > >>>>> _______________________________________________ > >>>>> Users mailing list > >>>>> Users(a)openser.org > >>>>> http://openser.org/cgi-bin/mailman/listinfo/users > >>>>> > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > >

3 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users