- sr-users - kamailio.org

[Serusers] www_challenge() error in auth module
by raj gopal 02 Feb '07

02 Feb '07

Hi, I can not use www_challenge(realm,qop)function in ser.cfg file even though auth module is loaded. The readme file has documentation for it. When I use the following in config file and start SER, the following error is thrown if (!radius_www_authorize("")) { www_challenge("", "1"); break; }; parse error (197,49-50): unknown command, missing loadmodule? Can any one help me to find out whats wrong with this module/function. -Venkat

1 0

[Serusers] automated response
by Patrick Timmons 02 Feb '07

02 Feb '07

IMPORTANT NOTE: if you are receiving this auto responder after accessing Acme Packet's web portal or sending an email to a mailing list, rest assured that your message has been received and will be acted upon by the appropriate personnel. I am taking Friday, February 2 through Tuesday, February 6 off and will be mostly unavailable during this time. I will not have access to a computer, but will be reachable via my cell phone in the event of emergencies. For support issues, please contact support(a)acmepacket.com. For non-support issues, please contact Erin Medeiros, Vice President of Professional Services, at emedeiros(a)acmepacket.com. Thank you, Patrick Timmons Vice President, Systems Engineering Acme Packet, Inc.

1 0

[Serusers] ser 0.10.99 - call forwarding issue
by tzieleniewski 01 Feb '07

01 Feb '07

hi! I am trying to set up the call forwarding feature and I have some question bout the idea how to realize this. My Idea was to do it with the usage of avp's. First thing I do is the check if there is a call_forward parameter set in the database in user_attrs table. I do this by invoking load_attrs("$fu", "$f.uid"); and then I do the check if ($tu.call_forward) On the "what's new site" in the avps and selects article I found another method which performs similar task: lookup_user("$tu","@ruri") What is the difference between those to methods?? Are they part of the SER core? previously in ser 0.9.x I have it done by, first loading the avp by avp_db_load() and then in case of call forwarding by making avp_pushto("$ruri","something") or rewriteuri() and then t_relay(). What is now a preferred way to realized similar functions. I mean can I utilize those methods like load_attrs or lookup_user() and then substitute the ruri without avp_pushto or rewriteuri?? best tomasz

2 5

Re: [Users] Acc'ing + Flatstore, Log Format?
by Bogdan-Andrei Iancu 01 Feb '07

01 Feb '07

Brandon, the log_fmt parameter affects only the syslog accounting (logging via syslog to log files). Flatstore is implemented as Write-Only DB engine, so it be used by the DB part of the accounting module. You need to play with the "db_*" related parameters from the ACC module. regards, bogdan Brandon Armstead wrote: > Bogdan-Andrei Iancu wrote: > >> Hi Brandon, >> >> what version of OpenSER are you using? There were important changes >> in the latest version, so it is important to know it. >> >> regards, >> bogdan >> >> Brandon Armstead wrote: >> >>> Hello everyone, >>> >>> Just a quick question, I have the following in my configuration: >>> modparam("acc", "log_fmt", "miocrdfs01"), however, in the actual >>> logging it is giving me back 14 different log "information", yet the >>> format "miocrdfs01" is only 10, does flatstore use a different >>> formatting mechanism, or does it force it to be that 14, and only >>> that 14, or anyone know whats going on? Thanks >>> >>> Regards, >>> Brandon >>> >>> _______________________________________________ >>> Users mailing list >>> Users(a)openser.org >>> http://openser.org/cgi-bin/mailman/listinfo/users >>> >> >> > Hello Bodgan, > > I'm currently using OpenSER version 1.1.1-notls. Thanks again! > > Regards, > Brandon >

1 0

[Serusers] src_ip=="%$foo"
by Atle Samuelsen 01 Feb '07

01 Feb '07

Hi guys and girls, is it possible to do a if(src_ip=="%$foo") where $foo contains more then one IP address? - Atle

1 0

[Serusers] Presence client error
by Jens-Martin Groenne 01 Feb '07

01 Feb '07

I'm testing the presence module on 0.10.99-dev in CVS. When using the newest X-lite client I am getting the following error messages in /var/log/messages /usr/local/sbin/ser[30891]: INFO: rls_mod.c:155: reading RLS data from database /usr/local/sbin/ser[30879]: INFO: subscribe.c:286: Unsupported event package /usr/local/sbin/ser[30879]: ERROR: subscribe.c:590: Error while checking message /usr/local/sbin/ser[30879]: INFO: subscribe.c:603: handle_subscription about to send_reply and return -2 /usr/local/sbin/ser[30885]: Warning: run_failure_handlers: no UAC support (0, 256) /usr/local/sbin/ser[30885]: WARN: rl_subscription.c:398: destroying subscription from callback due to 420 response on NOTIFY /usr/local/sbin/ser[30885]: TRACE: rl_subscription.c:400: RLS: subscription destroyed!!! In X-lite I get this error message: [07-01-30]15:44:45.526 | Debug | RESIP:TRANSACTION | "Match!" | [07-01-30]15:44:45.526 | Debug | RESIP:TRANSACTION | "Send to TU: TU: DialogUsageManager size=0 NOTIFY sip:tuser@192.168.1.35:34492 SIP/2.0 Via: SIP/2.0/UDP 85.112.135.70;branch=z9hG4bK7ed6.d015cec1.0 Max-Forwards: 70 Require: eventlist Contact: <sip:85.112.135.70:5060> To: ""Jens""<sip:tuser@test-domain.com>;tag=d204727a From: <sip:tuser@test-domain.com>;tag=a6a1c5f60faecf035a1ae5b6e96e979a-1a1f Call-ID: OTYwMDE1NmQ5MDQwYjFmMTBlZjQ0NTNhZTExNWM4MGM. CSeq: 10 NOTIFY Content-Type: multipart/related;type=""application/rlmi+xml"";start=""qwW1099041416pPdxX1162343142"";boundary=""RewXdpxR741013657xA447338541""; User-Agent: Sip EXpress router(0.10.99-dev66 (i386/linux)) Subscription-State: active;expires=300 Event: presence Content-Length: 338 --RewXdpxR741013657xA447338541 Content-Transfer-Encoding: binary Content-ID: qwW1099041416pPdxX1162343142 Content-Type: application/rlmi+xml;charset=""UTF-8"" <?xml version=""1.0""?> <list xmlns=""urn:ietf:params:xml:ns:rlmi"" uri=""sip:tuser@test-domain.com"" version=""0"" fullState=""true""> </list> --RewXdpxR741013657xA447338541-- " | [07-01-30]15:44:45.526 | Debug | RESIP | "SipMessage::getContents: multipart/related" | [07-01-30]15:44:45.526 | Debug | RESIP:DUM | "Decrypted message:02815028 " | [07-01-30]15:44:45.526 | Info | RESIP:DUM | "Got: SipReq: NOTIFY tuser@192.168.1.35:34492 tid=7ed6.d015cec1.0 cseq=NOTIFY contact=85.112.135.70:5060 / 10 from(wire)" | [07-01-30]15:44:45.526 | Info | RESIP:DUM | "Received an unsupported option tag(s): SipReq: NOTIFY tuser@192.168.1.35:34492 tid=7ed6.d015cec1.0 cseq=NOTIFY contact=85.112.135.70:5060 / 10 from(wire)" | [07-01-30]15:44:45.526 | Debug | RESIP | "Helper::makeResponse(SipReq: NOTIFY tuser@192.168.1.35:34492 tid=7ed6.d015cec1.0 cseq=NOTIFY contact=85.112.135.70:5060 / 10 from(wire) code=420 reason=" | [07-01-30]15:44:45.526 | Debug | RESIP | "SEND: SipResp: 420 tid=7ed6.d015cec1.0 cseq=NOTIFY / 10 from(tu)" | [07-01-30]15:44:45.527 | Debug | RESIP:DUM | "Failed required options validation NOTIFY sip:tuser@192.168.1.35:34492 SIP/2.0 Via: SIP/2.0/UDP 85.112.135.70;branch=z9hG4bK7ed6.d015cec1.0 Max-Forwards: 70 Require: eventlist Contact: <sip:85.112.135.70:5060> To: ""Jens""<sip:tuser@test-domain.com>;tag=d204727a From: <sip:tuser@test-domain.com>;tag=a6a1c5f60faecf035a1ae5b6e96e979a-1a1f Call-ID: OTYwMDE1NmQ5MDQwYjFmMTBlZjQ0NTNhZTExNWM4MGM. CSeq: 10 NOTIFY Content-Type: multipart/related;type=""application/rlmi+xml"";boundary=""RewXdpxR741013657xA447338541"";start=""qwW1099041416pPdxX1162343142"" User-Agent: Sip EXpress router(0.10.99-dev66 (i386/linux)) Subscription-State: active;expires=300 Event: presence Content-Length: 334 --RewXdpxR741013657xA447338541 Content-Type: application/rlmi+xml;charset=""UTF-8"" Content-Transfer-Encoding: binary Content-Id: qwW1099041416pPdxX1162343142 <?xml version=""1.0""?> <list xmlns=""urn:ietf:params:xml:ns:rlmi"" uri=""sip:tuser@test-domain.com"" version=""0"" fullState=""true""> </list> - Does any know know how to solve this problem? Is there any other clients that works well with the ser presence module? Kind regards, Jens-Martin Groenne

2 5

[Fwd: Re: [Users] Acc'ing + Flatstore, Log Format?]
by Brandon Armstead 01 Feb '07

01 Feb '07

1 0

[Users] Acc'ing + Flatstore, Log Format?
by Brandon Armstead 01 Feb '07

01 Feb '07

Hello everyone, Just a quick question, I have the following in my configuration: modparam("acc", "log_fmt", "miocrdfs01"), however, in the actual logging it is giving me back 14 different log "information", yet the format "miocrdfs01" is only 10, does flatstore use a different formatting mechanism, or does it force it to be that 14, and only that 14, or anyone know whats going on? Thanks Regards, Brandon

2 1

[Serusers] Reconnect to Mysql
by Shaun Hofer 01 Feb '07

01 Feb '07

Hi When ever MySQL Server (5.0.24a) on a remote machine is restarted, SER can't reconnect to the MySQL server. I see this problem has occurred before via mailing list: ERROR message : MySQL server has gone away (http://lists.iptel.org/pipermail/serusers/2006-April/027961.html) I am running debian package of SER 0.9.6-2 (ser-mysql-module 0.9.6-2) and MySQL Client 5.0.32 . I have tested that the MySQL client reconnects after server has been restarted. Is there something I'm missing that I'm still getting this problem ? Thanks --Shaun

1 1

[Serusers] Problem with sl_send_reply: I won't send a reply for ACK.
by Ricardo Martinez 31 Jan '07

31 Jan '07

Hello list. I'm facing a problem with a UAC and i was hoping that someone can give me a hand here. I have a IP Phone calling to a PSTN number through SER and then a GW. 10.0.0.243 : IP Phone 10.0.0.246 : SER SIP Proxy 10.0.0.239 : GW SIP PSTN When the call is established and the "200 - OK" message arrives from the GW to the Proxy, the proxy re-route the message back to the Client, and finally the client respond with an ACK. Here is when te problem begins, i'm not sure if the ACK is the problem or maybe is a bug with my SER box. I'm using the Getting Started ser.cfg from iptel.org. You can see the debug here: U 10.0.0.239:5060 -> 10.0.0.246:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 10.0.0.246;branch=z9hG4bK34e7.0648f244.0. Via: SIP/2.0/UDP 10.0.0.243:5060;rport=5060;branch=z9hG4bK407006395. From: <sip:5501234567@sipvoiss.desa.mydomain.net>;tag=139103625. To: <sip:0101005622408196@sipvoiss.desa.mydomain.net>;tag=d745f073a4. Call-ID: 90212623(a)10.0.0.243. CSeq: 21 INVITE. Supported: timer, replaces, early-session. User-Agent: A SIP Gateway. Contact: sip:005622408196@10.0.0.239. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, UPDATE, REFER, NOTIFY, INFO. Content-Type: application/sdp. Content-Length: 247. Record-Route: <sip:10.0.0.246;ftag=139103625;lr=on>. . v=0. o=005622408196 1170173661 1170173661 IN IP4 10.0.0.239. s=A Gateway SDP. c=IN IP4 10.0.0.239. t=1170173661 0. m=audio 23614 RTP/AVP 18 101. a=rtpmap:18 G729/8000/1. a=rtpmap:101 telephone-event/8000/1. a=fmtp:101 0-15. a=ptime:20. U 10.0.0.246:5060 -> 10.0.0.243:5060 SIP/2.0 200 OK. Via: SIP/2.0/UDP 10.0.0.243:5060;rport=5060;branch=z9hG4bK407006395. From: <sip:5501234567@sipvoiss.desa.mydomain.net>;tag=139103625. To: <sip:0101005622408196@sipvoiss.desa.mydomain.net>;tag=d745f073a4. Call-ID: 90212623(a)10.0.0.243. CSeq: 21 INVITE. Supported: timer, replaces, early-session. User-Agent: A SIP Gateway. Contact: sip:005622408196@10.0.0.239. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, UPDATE, REFER, NOTIFY, INFO. Content-Type: application/sdp. Content-Length: 247. Record-Route: <sip:10.0.0.246;ftag=139103625;lr=on>. . v=0. o=005622408196 1170173661 1170173661 IN IP4 10.0.0.239. s=A Gateway SDP. c=IN IP4 10.0.0.239. t=1170173661 0. m=audio 23614 RTP/AVP 18 101. a=rtpmap:18 G729/8000/1. a=rtpmap:101 telephone-event/8000/1. a=fmtp:101 0-15. a=ptime:20. U 10.0.0.243:5060 -> 10.0.0.246:5060 ACK sip:0101005622408196@sipvoiss.desa.mydomain.net SIP/2.0. Via: SIP/2.0/UDP 10.0.0.243:5060;rport;branch=z9hG4bK1227697472. Route: <sip:10.0.0.246;ftag=139103625;lr=on>. From: <sip:5501234567@sipvoiss.desa.mydomain.net>;tag=139103625. To: <sip:0101005622408196@sipvoiss.desa.mydomain.net>;tag=d745f073a4. Call-ID: 90212623(a)10.0.0.243. CSeq: 21 ACK. Contact: <sip:5501234567@10.0.0.243:5060>. Max-Forwards: 70. User-Agent: S SIP User Agent / 1.10. Content-Length: 0. . Is this ACK ok?. The ACK hits the "Sanity Checks" (Max Forwards) and then breaks sending to console : "Warning: sl_send_reply: I won't send a reply for ACK!!" I was reading the RFC3261 because i'm not sure about the R-URI from this endpoint. Let me explain : RFC3261 : Section 12.1.2 The route set MUST be set to the list of URIs in the Record-Route header field from the response, taken in reverse order and preserving all URI parameters. If no Record-Route header field is present in the response, the route set MUST be set to the empty set. This route set, even if empty, overrides any pre-existing route set for future requests in this dialog. The remote target MUST be set to the URI from the Contact header field of the response. So, if this is correct the R-URI from the ACk must be set to sip:005622408196@10.0.0.239, and not the sip:0101005622408196@sipvoiss.desa.mydomain.net. Is this ok?. I think this is causing the ACK problem in my SER box. Can someone help me here? Thanks in advance. Best Regards, Ricardo Martinez.-

2 1

[Serusers] a problem about radius and digest - openser patch
by TZieleniewski 31 Jan '07

31 Jan '07

_______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Users] ERROR: module version mismatch for /usr/local/lib/openser/modules/mysql.so; core: openser 1.1.1-tls (i386/freebsd); module: openser 1.1.1-notls (i386/freebsd)
by Hansi 31 Jan '07

31 Jan '07

Hello All, I have installed openser-1.1.1 with tls on my box. However, when I try to run openser. It returns me this error: ERROR: module version mismatch for /usr/local/lib/openser/modules/mysql.so; core: openser 1.1.1-tls (i386/freebsd); module: openser 1.1.1-notls (i386/freebsd). Would someone be kind enough to help me how to compile a mysql.so which supports tls? Thank you. "I'm a great believer in luck and I find the harder I work, the more I have of it." --------------------------------- No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started.

1 0

[Serusers] Multiple Gateway Help
by Giovanni Chirico 30 Jan '07

30 Jan '07

Hi, How I can send calls to multiple Gateway? I would like to use the "dispatcher module". I made my configuration with dispatcher module, the calls are redirect to the gateway defined in the dispatcher.list file, but when I hung up the call the client always ring. (No BYE message). In attachment my ser.cfg file. Thanks in advance, John

1 0

[Serusers] Getting 513 - Message too big for REGISTER message
by Sudhakar Patil 30 Jan '07

30 Jan '07

Hi, I am running into the attached errors. Appreciate your help. To add further clarification, looks like if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); exit; }; max_len is getting converted to 0 (zero) and hence I keep getting 513 error message. I replaced max_len with numeric values but the effect is the same in that when comp_num in route.c is called the right value is always 0 (zero). Regards, Sudhakar. ____________________________________________________________________________________ Expecting? Get great news right away with email Auto-Check. Try the Yahoo! Mail Beta. http://advision.webevents.yahoo.com/mailbeta/newmail_tools.html

2 1

[Users] approaching testing phase for 1.2.0
by Daniel-Constantin Mierla 30 Jan '07

30 Jan '07

Hello everybody, we are approaching the testing phase for release 1.2.0. This week is planned to be the latest before cvs freezing. Then we will take care only of bug fixing, documentation update and small tunings. By this week we should be able to fix pending issues like script variables, dns failover and black lists, timers -- most of the code being already available on public cvs. If you have something else in mind, please send a mail to devel mailing list. Cheers, Daniel

2 3

[Serusers] does ser support presence?
by Su Kerry 30 Jan '07

30 Jan '07

2 1

[Serusers] Re: a problem about radius and digest
by TZieleniewski 29 Jan '07

29 Jan '07

1 0

[Serusers] nathelper / rtpproxy
by Nhadie 29 Jan '07

29 Jan '07

Hi All, Can i use nathelper/rtpproxy on extension to extension and not use when an extension calls PSTN? Please see config if it makes sense. Thank You if (nat_uac_test("3")) { if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewritingn"); fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; if ((uri=~"^(sip:)?00[0-9]*@([a-z]+.)?mydomain.com") || (uri=~"^(sip:)?00[0-9]*@2.2.2.2")) { if (is_user_in("From", "onstun")) { if (isflagset(8)) {xlog("L_INFO", "THIS GROUP SHOULD NOT USE RTPPROXYn");}; # Strip first to digits (00) strip(2); prefix("37333#"); rewritehostport("10.10.10.10:5060"); consume_credentials(); t_relay_to_udp("10.10.10.10","5060"); break; } else { if (isflagset(8)) {xlog("L_INFO", "THIS WILL USE RTPPROXYn");}; if (isflagset(6)) route(1); <----- WILL CHECK SET FLAG 6 so that it will USE NATHELPER/RTPPROXY WILL THIS WORK? strip(2); prefix("37333#"); rewritehostport("10.10.10.10:5060"); consume_credentials(); t_relay_to_udp("10.10.10.10","5060"); break; } route[1] { xlog("L_INFO", "User-Agent behind NATn"); force_rtp_proxy(); if (method=="INVITE") { t_on_reply("1"); }; append_hf("P-Behind-NAT: Yesrn"); break; } ________________________________________________ Message sent using UebiMiau 2.7

2 1

[Serusers] Ser 0.9.6 + RADIUS
by Daniel Corbe 29 Jan '07

29 Jan '07

I cannot get my SER to talk to my RADIUS server, its just blindly 401ing things without ever making contact with RADIUS. SER config looks like this if (method == "REGISTER") { if (!radius_www_authorize("")) { www_challenge("", "1"); break; }; save("location"); }; radiusclient-ng servers file: 192.168.1.103 heslo radiusclient.conf: auth_order radius,local login_tries 4 login_timeout 60 authserver 192.168.1.103:1812 acctserver 192.168.1.103:1813 dictionary /usr/local/etc/radiusclient-ng/dictionary FreeRADIUS clients.conf: client 192.168.1.109 { secret = heslo shortname = proxy1 nastype = other Not sure what to do!

3 11

Res: [Users] 407 and algorithm=MD5
by Bruno Machado 29 Jan '07

29 Jan '07

Hi Bogdan The section 3.2.1 (The WWW-Authenticate Response Header) from RFC 2617 says: "algorithm A string indicating a pair of algorithms used to produce the digest and a checksum. If this is not present it is assumed to be "MD5". " I send a INVITE to Openser but it send back a 407 (Proxy Authentication). The parameter response was OK. But, without the parameter 'algorithm', the proxy didn't allow the authentication. It neither consult at Radius. Looking at the RFC above, the SIP proxy must to use MD5 by default, but it don't accept the message without the parameter. Can it be a bug of OpenSER? Or my interpretation is wrong? (I bet that I'm wrong :) ) Best regards. Bruno Machado ----- Mensagem original ---- De: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> Para: Bruno Machado <bsmufu(a)yahoo.com.br> Cc: users(a)openser.org Enviadas: Segunda-feira, 29 de Janeiro de 2007 14:21:31 Assunto: Re: [Users] 407 and algorithm=MD5 Hi Bruno, you cannot configure to have the algorithm param added. If I'm not wrong, the digest RFC says this is an optional param and the default value is MD5. regards, bogdan Bruno Machado wrote: > Hi. > > When I use the function proxy_challenge(), the 407 don't have the > parameter 'algorithm=MD5'. Look below: > > ... > Proxy-Authenticate: Digest realm="proxy.com.br", > nonce="45be00f941f137ff037436c77f80a9531a02155f". > ... > > How can I put this parameter in digest informations? > > ... > Proxy-Authenticate: Digest realm="proxy.com.br", > nonce="45be00f941f137ff037436c77f80a9531a02155f", > algorithm="MD5". > ... > > > Thanks in advance. > > Bruno > > __________________________________________________ > Fale com seus amigos de graça com o novo Yahoo! Messenger > http://br.messenger.yahoo.com/ > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > __________________________________________________ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/

1 0

[Users] new features: script variables and pseudo-variables in script
by Daniel-Constantin Mierla 29 Jan '07

29 Jan '07

Hello everybody, the development version allows now ability to use pseudo-variables directly in configuration file. In addition to old pseudo-variables you know, a new type was introduced: script variables - the format is $var(name) where name can be any string of digits and characters. Basically this are variables that can have integer or string values and they can be set directly in the configuration file via 'assign operation. The big advantage is that they are directly referenced at runtime, avoiding searching each access time. They are specific per processes and survive over multiple sip message processing (be sure you set the value before testing it -- e.g., $var(counter) = $var(counter) + 1 at the beginning of main route is a counter of messages processed). The script variables are initialized at startup to '0'. You can shift between value types: e.g., '$var(a)=1; $var(a)="openser";' is valid. The switch statement can be used now with any valid pseudo-variable ('retcode' must be now replaced with '$retcode' to get old behavior). switch($rU) will compare the r-uri username with 'case' values. The case 'values' can be string or integer. switch($rU) { case "101": xlog("dialed number is 101\n"); break; case "102": xlog("dialed number is 102\n"); break; default: xlog("dialed number is $rU\n"); } Assignments of script variables, AVPs, R-URI parts (username, domain, and URI) and dst URI can be done as well in script. $avp(i:11) = 1; - sets the value of $avp(i:11) to integer '1' $avp(i:11) = "1"; - sets the value of $avp(i:11) to string '1' $ru = "sip:"+$var(user)+"@"+$fd; - sets the R-URI to string composed from value of variable $var(user) and From URI domain '+' can be used to concatenate strings or do arithmetic addition. Other arithmetic operators: - '-' - minus - '/' - divide - '*' - multiply - '%' - modulo - '|' - bitwise OR - '&' - bitwise AND - '^' - bitwise XOR - '~' - bitwise NOT To make sure that the priority of the operators is right, do use parenthesis, it is the best to get expected result: $var(a) = 2 + (7&(~4)); If you want to evaluate arithmetic operations and test the value in conditions, use the test operator ' [ ... ] ' . This is required to convert the result to internal convention for drop, true and false. if ( [ $var(a)&4 ] ) { xlog("bit 3 is set in var a"); } Old '*' used to match any port or proto was changed to 'any' to avoid the conflict with multiply operator. Some operations overlap with several avpops functions. Until sure that all cases are covered in script variant, both will go further, avpops version being scheduled for deprecation. It was a big lump of changes, help in testing and feedback is very much appreciated. Cheers, Daniel

2 1

[Users] 407 and algorithm=MD5
by Bruno Machado 29 Jan '07

29 Jan '07

Hi. When I use the function proxy_challenge(), the 407 don't have the parameter 'algorithm=MD5'. Look below: ... Proxy-Authenticate: Digest realm="proxy.com.br", nonce="45be00f941f137ff037436c77f80a9531a02155f". ... How can I put this parameter in digest informations? ... Proxy-Authenticate: Digest realm="proxy.com.br", nonce="45be00f941f137ff037436c77f80a9531a02155f", algorithm="MD5". ... Thanks in advance. Bruno __________________________________________________ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/

2 1

[Users] want to try out openSER
by Ahsen 29 Jan '07

29 Jan '07

Hello ! I have an problem with the SER ..therefore I want to install the OpenSER, but before I install it I want to know whether it can solve my problem or not. I got an shell script which starts a java application , there are no problem with it. But when I start the script with SERs exec module (exec_msg() ) the java application does not support german charset and replaces german spellings with "?". The problem do not occur when I start the shell script manually. I have testet a lot of thinks but the problem still exists. So can someone tell whether he/she has such a problem with OpenSER or not or have an idea how I can solve the problem with SER ? If not I would try out OpenSER ! thanks Ahsen

2 1

[Users] Help. in OpenSER in Post-paid and pre-paid
by raviprakash sunkara 27 Jan '07

27 Jan '07

Hello Users, I'm Using The Following software of My Sip productions, 1) OpenSER is a Sip Server,proxy, in front-end 2) Asterisk is PBX server, in Back-end 3) Radius for AAA to OpenSER, 4) Asterisk-java for IVR for Billing Customer care if I didn't any mistakes in these mail , forgive me . My Question is 1) If Caller calls to Callee , Before the call established to callee. The Caller has to know his Balance Account. if the Balance is there, then only the call has to establish, 2) I want the OpenSER total in RealTime application Server like Java application . Call Authorization ( Question no 1 ). If Asterisk is Front-end , ---> problem is Solved, How can a b2bua implement with OpenSER, please when -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

1 0

[Serusers] ERROR: load_module: could not open module </usr/lib/ser/modulestextops.so>
by subhransu behera 27 Jan '07

27 Jan '07

Hi All I am using a FC-6 machine and installed ser-0.9.6-9.fc6. But while starting the serctl I got the following the error. So do you have any clue about it? Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed ********************************************************* 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulessl.so>: /usr/lib/ser/modulessl.so: cannot open shared object file: No such file or directory 0(4265) parse error (30,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulestm.so>: /usr/lib/ser/modulestm.so: cannot open shared object file: No such file or directory 0(4265) parse error (31,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulesrr.so>: /usr/lib/ser/modulesrr.so: cannot open shared object file: No such file or directory 0(4265) parse error (32,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulesmaxfwd.so>: /usr/lib/ser/modulesmaxfwd.so: cannot open shared object file: No such file or directory 0(4265) parse error (33,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulesusrloc.so>: /usr/lib/ser/modulesusrloc.so: cannot open shared object file: No such file or directory 0(4265) parse error (34,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulesregistrar.so>: /usr/lib/ser/modulesregistrar.so: cannot open shared object file: No such file or directory 0(4265) parse error (35,13-14): failed to load module 0(4265) ERROR: load_module: could not open module </usr/lib/ser/modulestextops.so>: /usr/lib/ser/modulestextops.so: cannot open shared object file: No such file or directory 0(4265) parse error (36,13-14): failed to load module 0(4265) set_mod_param_regex: No module matching usrloc found | 0(4265) parse error (47,21-22): Can't set module parameter 0(4265) set_mod_param_regex: No module matching rr found | 0(4265) parse error (65,19-20): Can't set module parameter 0(4265) parse error (75,34-35): unknown command, missing loadmodule? 0(4265) parse error (76,22-23): unknown command, missing loadmodule? 0(4265) parse error (80,23-24): unknown command, missing loadmodule? 0(4265) parse error (89,32-33): unknown command, missing loadmodule? 0(4265) parse error (93,18-19): unknown command, missing loadmodule? 0(4265) parse error (95,19-20): unknown command, missing loadmodule? 0(4265) parse error (102,19-20): unknown command, missing loadmodule? 0(4265) parse error (120,11-12): unknown command, missing loadmodule? 0(4265) parse error (124,12-13): unknown command, missing loadmodule? 0(4265) parse error (126,20-21): unknown command, missing loadmodule? 0(4265) parse error (132,17-18): unknown command, missing loadmodule? 0(4265) parse error (133,24-25): unknown command, missing loadmodule? 0(4265) parse error (137,18-19): unknown command, missing loadmodule? 0(4265) parse error (145,15-16): unknown command, missing loadmodule? 0(4265) parse error (146,18-19): unknown command, missing loadmodule? ERROR: bad config file (24 errors) [root@host223 ~]# /usr/sbin/serctl start Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed [root@host223 ~]# rpm -q ser ser-0.9.6-9.fc6 [root@host223 ~]# [root@host223 ~]# /usr/sbin/serctl start Starting SER : PID file /var/run/ser.pid does not exist -- SER start failed [root@host223 ~]# vi /var/log/messages [root@host223 ~]# /usr/sbin/ser -c 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulessl.so>: /usr/lib/ser/modulessl.so: cannot open shared object file: No such file or directory 0(4316) parse error (30,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulestm.so>: /usr/lib/ser/modulestm.so: cannot open shared object file: No such file or directory 0(4316) parse error (31,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulesrr.so>: /usr/lib/ser/modulesrr.so: cannot open shared object file: No such file or directory 0(4316) parse error (32,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulesmaxfwd.so>: /usr/lib/ser/modulesmaxfwd.so: cannot open shared object file: No such file or directory 0(4316) parse error (33,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulesusrloc.so>: /usr/lib/ser/modulesusrloc.so: cannot open shared object file: No such file or directory 0(4316) parse error (34,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulesregistrar.so>: /usr/lib/ser/modulesregistrar.so: cannot open shared object file: No such file or directory 0(4316) parse error (35,13-14): failed to load module 0(4316) ERROR: load_module: could not open module </usr/lib/ser/modulestextops.so>: /usr/lib/ser/modulestextops.so: cannot open shared object file: No such file or directory 0(4316) parse error (36,13-14): failed to load module 0(4316) set_mod_param_regex: No module matching usrloc found | 0(4316) parse error (47,21-22): Can't set module parameter 0(4316) set_mod_param_regex: No module matching rr found | 0(4316) parse error (65,19-20): Can't set module parameter 0(4316) parse error (75,34-35): unknown command, missing loadmodule? 0(4316) parse error (76,22-23): unknown command, missing loadmodule? 0(4316) parse error (80,23-24): unknown command, missing loadmodule? 0(4316) parse error (89,32-33): unknown command, missing loadmodule? 0(4316) parse error (93,18-19): unknown command, missing loadmodule? 0(4316) parse error (95,19-20): unknown command, missing loadmodule? 0(4316) parse error (102,19-20): unknown command, missing loadmodule? 0(4316) parse error (120,11-12): unknown command, missing loadmodule? 0(4316) parse error (124,12-13): unknown command, missing loadmodule? 0(4316) parse error (126,20-21): unknown command, missing loadmodule? 0(4316) parse error (132,17-18): unknown command, missing loadmodule? 0(4316) parse error (133,24-25): unknown command, missing loadmodule? 0(4316) parse error (137,18-19): unknown command, missing loadmodule? 0(4316) parse error (145,15-16): unknown command, missing loadmodule? 0(4316) parse error (146,18-19): unknown command, missing loadmodule? ********************************************************* Kindly assist me how can I start the ser. Regards, Subhransu __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

2 1

[Users] tm:t_write_unix: write_to_unixsock failed
by Peter Lemenkov 26 Jan '07

26 Jan '07

Hello, All! I'm trying to use openser as SIP-router and SEMS as voicemail/conference/etc. But then I tried it the following error occured then openSER tried to contact SEMS: 0(31580) ERROR: tsend_datagram_ev: failed to send: (12) Cannot allocate memory 0(31580) ERROR:tm:write_to_unixsock: writev failed: Cannot allocate memory 0(31580) ERROR:tm:t_write_unix: write_to_unixsock failed I pointed right SEMS socked in OpenSER config, but looks like no one single byte wasn't written in in. omega1 ~ # openser -V version: openser 1.2.0-dev18-notls (x86_64/linux) flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. @(#) $Id: main.c,v 1.27 2007/01/11 10:58:47 bogdan_iancu Exp $ main.c compiled on 15:27:13 Jan 15 2007 with gcc 3.4.6 omega1 ~ # I'm using latest SEMS from SVN (rev. 192), but stable release don't work also. Here is my openser.cfg: ======================================== if (!t_newtran()){ sl_send_reply("500","could not create transaction"); return; }; if (method=="INVITE"){ # avp_db_load("$ru", "$avp(email)"); if(!t_write_unix("/tmp/sems_sock","conference")) { t_reply("500","error contacting sems"); }; } return; ======================================== What I'm dong wrong? -- With best regards!

2 3

[Users] MSRP support
by Danilo Vilela Dantas 26 Jan '07

26 Jan '07

Hi all, two doubts about OpenSER version 1.2: 1. This version will support MSRP sessions ? It will implements a MSRP Relay? 2. It will support chunking messages ? Thank you very much and Best regards, Danilo Vilela Researcher Inovax Engenharia de Sistemas Rio de Janeiro, Brazil

2 1

[Serusers] ser and radius - WARNING! No "known good" password found for the user.
by tzieleniewski 25 Jan '07

25 Jan '07

Hi! I am trying to use freeradius as an authentication server for ser. I use the latest cvs version. I am o newbee with free radius so a kindly ask for your help becouse someone who has manage to done radius support probably wouldn/t have any probelms to point me what I do wrong. I configured ser so it sends the requests messages to radius but I encountered a strange error. Both are running on the same machine so it is enough to use the 127.0.0.1 client configuration from client.conf. I defined realm that would service the request comming with the "voip.touk.pl" domain part in the proxy.conf: realm voip.touk.pl { type = radius authhost = LOCAL accthost = LOCAL nostrip } I also included the digest modules in the authentication and authorization sections in the radiusd.conf. At the end I added the user data in the users file: hellboy Auth-Type := Digest, User-Password := "hellboy", Huntgroup-Name == "voip.touk.pl" Fall-Through = No, User-Name = `%{User-Name}`, Reply-Message = "Accepted: %{User-Name}" And know when SER sends the authentication request radius rejects it and there is this "strange" info" in radius debug rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. Another thing wich is strange is: modcall[authorize]: module "suffix" returns noop for request 0 When my suffix is defined in the radiusd.conf as: realm suffix { format = suffix delimiter = "@" } here is the whole free radius degub outout: rad_recv: Access-Request packet from host 127.0.0.1 port 32794, id=225, length=299 User-Name = "hellboy(a)voip.touk.pl" Digest-Attributes = 0x0a0968656c6c626f79 Digest-Attributes = 0x010e766f69702e746f756b2e706c Digest-Attributes = 0x022a34356238633234313732386462316132343230333639303633313264366333626338363135306563 Digest-Attributes = 0x04177369703a7465737440766f69702e746f756b2e706c Digest-Attributes = 0x0308494e56495445 Digest-Attributes = 0x050661757468 Digest-Attributes = 0x090a3030303030303031 Digest-Attributes = 0x08223133304432333745384238443837353945304441383438444443323133353542 Digest-Response = "bd2e0fd81858b8114d326394b7b92001" Service-Type = 0x0000000f00000000 SER-Service-Type = 0x0000000300000000 SER-Uri-User = "hellboy" NAS-Port = 0x000013c400000000 NAS-IP-Address = 0x7f00000100000000 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 0 rlm_realm: Looking up realm "voip.touk.pl" for User-Name = "hellboy(a)voip.touk.pl" rlm_realm: Found realm "voip.touk.pl" rlm_realm: Proxying request from user hellboy to realm voip.touk.pl rlm_realm: Adding Realm = "voip.touk.pl" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 0 modcall[authorize]: module "files" returns noop for request 0 modcall[authorize]: module "expiration" returns noop for request 0 modcall[authorize]: module "logintime" returns noop for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type DIGEST auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_digest: Cleartext-Password or Digest-HA1 is required for authentication. modcall[authenticate]: module "digest" returns invalid for request 0 modcall: group authenticate returns invalid for request 0 auth: Failed to validate the user. Login incorrect: [hellboy(a)voip.touk.pl/<via Auth-Type = DIGEST>] (from client ip4.localhost port 0) Found Post-Auth-Type Processing the post-auth section of radiusd.conf modcall: entering group REJECT for request 0 radius_xlat: 'hellboy(a)voip.touk.pl' attr_filter: Matched entry DEFAULT at line 11 modcall[post-auth]: module "attr_filter.access_reject" returns updated for request 0 modcall: group REJECT returns updated for request 0 Best tomasz

2 1

[Serusers] Ser - Asterisk small problem
by karim basraoui 25 Jan '07

25 Jan '07

Hi, I am using an architecture with Ser and Asterisk. When Ser forwards the calls to asterisk, everything is all right. the caller has a "ringing" message and the callee rings. when the callee picks up, the caller has a "connecting" message but the callee hungs up suddenly. my asterisk shows the message: -- Got SIP Response 503 "server error" back from Ser_ip -- how can i tell to asterisk to setup the call ? thank you ! -- BASRAOUI Karim

2 1

[Serusers] SER forwarding to Asterisk
by karim basraoui 25 Jan '07

25 Jan '07

Hi, The topic may have been already discussed, but still there are some problems. I have an architecture like this : UA1 ->SER -> ASTERISK -> UA2 when UA1 sends an INVITE to UA2, SER forwards the call to ASTERISK, i can hear UA2 ringing. however, when UA2 answers, i can see "connected" on UA1 but UA2 hungs up by itself, as if ASTERISK cancels the call. is there any solution to oblige ASTERISK to forward the "200 OK" to SER? thanks in advance -- BASRAOUI Karim

1 1

[Users] authentication protocol
by Artur Hayne 25 Jan '07

25 Jan '07

Hi, Its possible the openser change the authentication protocol of the digest for otherone? Thanks Artur. __________________________________________________ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/

2 1

[Serusers] Re: [OpenIMSCore-Users] Getting 513 - Message too big for REGISTER message
by Dragos Vingarzan 25 Jan '07

25 Jan '07

Strange, this looks like a SER bug... Just comment these line and if you want to pursue it further, please report it on the serdev(a)iptel.org mailing lists. It seems to be only relevant to Solaris though. -Dragos Sudhakar Patil wrote: > Hello, > I am using FOKUS OpenIMSCore modules and configuration > that are built around SER. > > I am running the software on Solaris 8 OS with Sparc > v9 architecture and 64 bit compilation. > > I am using xten client. It sends REGISTER message but > gets 513: Message too long in the response. The actual > message size is 546 bytes. I have placed some DBG > commands in SER receive.c and action.c. Everywhere the > message size seems to be correct and is 546 bytes. > > The .cfg file of sip2ims module has the following code > snippet: > > if (msg:len >= max_len ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > I tracked the code eventually to route.c, comp_num > function where the comparison is made between msg:len > and max_len. However, when I print left and right > numbers, the right number is always 0 and hence the > expression is always TRUE and I get 513 always. > (Please see 1(22318) In comp_num. left 546, right 0 > debug output below) > > Below is the output of sip2ims module. > > Any help in fixing this problem is greatly > appreciated. > > > 1(22318) qm_malloc(100224ce8, 1392) called from > receive.c: receive_msg(92) > 1(22318) qm_malloc(100224ce8, 1392) returns address > 100265d38 frag. 100265d08 (size=1392) on 1 -th hit > 1(22318) SIP Request: > 1(22318) method: <REGISTER> > 1(22318) uri: <sip:open-ims.test> > 1(22318) version: <SIP/2.0> > 1(22318) parse_headers: flags=2 > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 1002657d0 frag. 1002657a0 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 232) called from > parser/msg_parser.c: get_hdr_field(111) > 1(22318) qm_malloc(100224ce8, 232) returns address > 100265870 frag. 100265840 (size=232) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/parse_via.c: parse_via(2142) > 1(22318) qm_malloc(100224ce8, 64) returns address > 1002659b8 frag. 100265988 (size=64) on 1 -th hit > 1(22318) Found param type 232, <branch> = > <z9hG4bK-d87543-27653f391711d351-1--d87543->; state=6 > 1(22318) qm_malloc(100224ce8, 64) called from > parser/parse_via.c: parse_via(2142) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100265a58 frag. 100265a28 (size=64) on 1 -th hit > 1(22318) Found param type 235, <rport> = <n/a>; > state=17 > 1(22318) end of header reached, state=5 > 1(22318) parse_headers: Via found, flags=2 > 1(22318) parse_headers: this is the first via > 1(22318) After parse_msg... > 1(22318) preparing to run routing scripts... > 1(22318) Message length 546 > 1(22318) completed exec_pre_cb > 1(22318) Before run_actions: message length 546 > 1(22318) Message length in run_actions546 > 1(22318) In ROUTE_T 1 546 > 1(22318) Message length in run_actions546 > 1(22318) Message length in run_actions546 > 1(22318) parse_headers: flags=100 > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100265af8 frag. 100265ac8 (size=64) on 1 -th hit > 1(22318) DEBUG:maxfwd:is_maxfwd_present: value = 70 > 1(22318) DBG:maxfwd:process_maxfwd_header: value 70 > decreased to 16 > 1(22318) priting e structure 0 > -------------------------------------------- > 1(22318) In comp_num. left 546, right 0 > -------------------------------------------- > 1(22318) Message length in run_actions546 > 1(22318) qm_malloc(100224ce8, 21) called from ut.c: > as_asciiz(135) > 1(22318) qm_malloc(100224ce8, 24) returns address > 100265b98 frag. 100265b68 (size=24) on 1 -th hit > 1(22318) parse_headers: flags=8 > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100265c10 frag. 100265be0 (size=200) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266308 frag. 1002662d8 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 88) called from > parser/msg_parser.c: get_hdr_field(151) > 1(22318) qm_malloc(100224ce8, 88) returns address > 1002663a8 frag. 100266378 (size=88) on 1 -th hit > 1(22318) end of header reached, state=9 > 1(22318) DEBUG: get_hdr_field: <To> [34]; > uri=[sip:alice@open-ims.test] > 1(22318) DEBUG: to body > ["alice"<sip:alice@open-ims.test> > ] > 1(22318) parse_headers: flags=ffffffffffffffff > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266460 frag. 100266430 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266500 frag. 1002664d0 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 1002665a0 frag. 100266570 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 40) called from > parser/msg_parser.c: get_hdr_field(130) > 1(22318) qm_malloc(100224ce8, 40) returns address > 100266640 frag. 100266610 (size=40) on 1 -th hit > 1(22318) get_hdr_field: cseq <CSeq>: <1> <REGISTER> > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 1002666c8 frag. 100266698 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266768 frag. 100266738 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266808 frag. 1002667d8 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 1002668a8 frag. 100266878 (size=64) on 1 -th hit > 1(22318) DEBUG: get_hdr_body : content_length=0 > 1(22318) qm_malloc(100224ce8, 64) called from > parser/msg_parser.c: parse_headers(297) > 1(22318) qm_malloc(100224ce8, 64) returns address > 100266948 frag. 100266918 (size=64) on 1 -th hit > 1(22318) found end of header > 1(22318) qm_free(100224ce8, 100266948), called from > parser/msg_parser.c: parse_headers(313) > 1(22318) qm_free: freeing frag. 100266918 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) check_via_address(192.168.120.1, > 192.168.120.1, 0) > 1(22318) qm_malloc(100224ce8, 13) called from > msg_translator.c: rport_builder(353) > 1(22318) qm_malloc(100224ce8, 16) returns address > 100266948 frag. 100266918 (size=64) on 1 -th hit > 1(22318) qm_malloc(100224ce8, 609) called from > msg_translator.c: build_res_buf_from_sip_req(1824) > 1(22318) qm_malloc(100224ce8, 616) returns address > 1002669e8 frag. 1002669b8 (size=616) on 1 -th hit > 1(22318) qm_free(100224ce8, 100266948), called from > msg_translator.c: build_res_buf_from_sip_req(1984) > 1(22318) qm_free: freeing frag. 100266918 alloc'ed > from msg_translator.c: rport_builder(353) > 1(22318) qm_free(100224ce8, 1002669e8), called from > sl_funcs.c: sl_send_reply(176) > 1(22318) qm_free: freeing frag. 1002669b8 alloc'ed > from msg_translator.c: > build_res_buf_from_sip_req(1824) > 1(22318) qm_free(100224ce8, 100265b98), called from > sl.c: w_sl_send_reply(178) > 1(22318) qm_free: freeing frag. 100265b68 alloc'ed > from ut.c: as_asciiz(135) > 1(22318) After run_actions > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) DEBUG:destroy_avp_list: destroying list 0 > 1(22318) receive_msg: cleaning up > 1(22318) qm_free(100224ce8, 1002659b8), called from > parser/parse_via.c: free_via_param_list(2361) > 1(22318) qm_free: freeing frag. 100265988 alloc'ed > from parser/parse_via.c: parse_via(2142) > 1(22318) qm_free(100224ce8, 100265a58), called from > parser/parse_via.c: free_via_param_list(2361) > 1(22318) qm_free: freeing frag. 100265a28 alloc'ed > from parser/parse_via.c: parse_via(2142) > 1(22318) qm_free(100224ce8, 100265870), called from > parser/parse_via.c: free_via_list(2373) > 1(22318) qm_free: freeing frag. 100265840 alloc'ed > from parser/msg_parser.c: get_hdr_field(111) > 1(22318) qm_free(100224ce8, 1002657d0), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 1002657a0 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100265af8), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100265ac8 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100265c10), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100265be0 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 1002663a8), called from > parser/parse_to.c: free_to(784) > 1(22318) qm_free: freeing frag. 100266378 alloc'ed > from parser/msg_parser.c: get_hdr_field(151) > 1(22318) qm_free(100224ce8, 100266308), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 1002662d8 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100266460), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100266430 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100266500), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 1002664d0 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100266640), called from > parser/parse_cseq.c: free_cseq(102) > 1(22318) qm_free: freeing frag. 100266610 alloc'ed > from parser/msg_parser.c: get_hdr_field(130) > 1(22318) qm_free(100224ce8, 1002665a0), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100266570 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 1002666c8), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100266698 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100266768), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100266738 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100266808), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 1002667d8 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 1002668a8), called from > parser/hf.c: free_hdr_field_lst(209) > 1(22318) qm_free: freeing frag. 100266878 alloc'ed > from parser/msg_parser.c: parse_headers(297) > 1(22318) qm_free(100224ce8, 100265d38), called from > receive.c: receive_msg(239) > 1(22318) qm_free: freeing frag. 100265d08 alloc'ed > from receive.c: receive_msg(92) > > Regards, > Sudhakar. > > > > > > > > ____________________________________________________________________________________ > The fish are biting. > Get more visitors on your site using Yahoo! Search Marketing. > http://searchmarketing.yahoo.com/arp/sponsoredsearch_v2.php > _______________________________________________ > OpenIMSCore-Users mailing list > OpenIMSCore-Users(a)lists.berlios.de > https://lists.berlios.de/mailman/listinfo/openimscore-users > > -- ----------------------------------------- Dipl. Eng. Dragos Vingarzan FOKUS/NGNI Kaiserin-Augusta-Allee 31 10589 Berlin,Germany Phone +49 (0)30 - 3463 - 7385 Mobile +49 (0)163 - 159 - 5221 eMail vingarzan(a)fokus.fraunhofer.de Web www.fokus.fraunhofer.de We could change the world if God would give us the source code... -----------------------------------------------------------------

1 0

[Serusers] Signalig through 2 proxies
by Gustavo Passos Tourinho 25 Jan '07

25 Jan '07

Hello there. I'm have some strange problem and was wondering if anyone of you can help me. I have 2 scenarios to call from a IP terminal to a PSTN. Scenario1: Terminal >> Proxy1 (statefull)>> Proxy2 (stateless)>> GW (PSTN) Scenario2: Terminal >> Proxy1 (statefull)>> GW (PSTN) The problem is when I use scenario 1. When the terminal sends BYE request, the GW never response with OK. In the other hand, using scenario 2, BYE request is respond with OK (by the GW). The signaling is perfectly normal. The signaling is the same, except by the via header add by second proxy. Thanks in advanced, Gustavo

2 2

[Users] avp_db_load
by Brandon Armstead 25 Jan '07

25 Jan '07

Hello everyone, I'm trying to load an avp from the database, now from my understanding I simply use the avp_db_load() function. Now I previously setup my avp_table to be usr_preferences, now I'm doing the following: route[5] { xlog("L_INFO", "time [$Tf] method <$rm> r-uri <$ru> 2nd via <$hdr(via[1])>\n"); avp_db_load("$rU/username", "$avp(s:e911)"); xlog("L_INFO", "CURRENT AVP VALUE: $avp(s:e911)"); if(is_avp_set("$avp(s:e911)")) { xlog("L_INFO", "CURRENT \$ru: $ru"); avp_pushto("$ru", "$avp(s:e911)"); xlog("L_INFO", "AFTER \$ru: $ru"); } route(1); } For route 5, and I have a AVP row for 'e911' in the database, with the username, domain, and the attribute set, the attribute ofcourse being e911, type 0, and a value set. However, I keep getting NULL back for the AVP I'm trying to pull, does anyone care to explain what I'm doing wrong? Thanks. -- Brandon Armstead

6 9

[Serusers] password length & ha1 calculation
by chiahuey 25 Jan '07

25 Jan '07

Hi there, If using plain text password and need to calculate ha1 on the fly, is there any requirement as in there is a minimum length for the password? I am using ser-0.9.6, and facing a strange issue here, if password length < 8, will have inconsistency in successful registration or invite. Always get (401 unauthorized or 407 proxy authentication required). if password length >= 8, will be consistently successful. As we are planning to port the users from another platform, can't change the password for all users. Anyone have any clue in the password length issue? Thanks in advance. Regards, Chia

2 1

[Serusers] non-symmetric rtp with rtpproxy??
by Cesc 24 Jan '07

24 Jan '07

Hi, I know this probably is a useless question, as rtpproxy says it is a symmetric proxy ... but i have to ask, for peace of mind :) In my setup, i have on one side a symmetric rtp phone (A) ... connected to a ser proxy + rtpproxy ... and on the other side, a non-symmetric phone (B). This is all on a lan, so no firewalls and stuff ... but I MUST use the rtpproxy and I MUST use this non-symmetric phone (more like a gateway, actually). A ------ SER+rtpproxy ------ B (nonsym) So, the funny thing happens that i end up reciving audio from B to A ... and then I hear A's own audio after being bounced by B (funny, huh?). The bouncing is due to rtpproxy changing the rtp port where he sends to B ... he starts with the one announced on SDP ... then, after the first RTP received from B, he switches to this new port ... mmmm I guess this is a lost cause ... but maybe someone has a brilliant idea?? :D (like a hack in rtpproxy which suddenly turns it into non-symmetrical-rtp-supported-endpoint proxy? :D ) Regards, Cesc

3 4

[Users] List of Functions
by Brandon Armstead 24 Jan '07

24 Jan '07

Hello everyone, I'm wondering if you guys have a list of functions available, core, module, etc, but one compiled list of functions, such as I'm having a hard time finding what module rewritehostport() belongs to, or is it a core function? Like is there an easier way to overview the functions available, whether it be core, or supplied via a module? Thanks, any input appreciated! -- Brandon Armstead

2 2

RE: [Users] openser, spa9000, etc.
by juliano Duque 24 Jan '07

24 Jan '07

Scott, By default You cannot reach the extensions registered to SPA9000 from the extensions registered at Openser. You will only reach the SPA9000 line registered at Openser. You can reach the other extensions registered at SPA 9000 if the SPA9000 line registered at Openser forward the call to the other extensions or if you set the extensions on SPA9000 to receive calls without authentication but for that to work you need to create aliases for that extensions on Openser pointing it to SPA9000 Regards, Juliano Duque

2 1

[Users] Openser and Grandstream
by Shane Burrell 24 Jan '07

24 Jan '07

We have a few Grandstream ATAs that lockup every few days. It requires a hard reboot. Anyone else experienced this? TIA Shane

1 0

[Users] VoIP tranzit proxy
by Ion Minzu 24 Jan '07

24 Jan '07

Hello , Hello, I have the following situation: UA's ----> openser ----> proxy ------> international 172.19.5.0/24 172.19.5.2 172.19.5.3 traffic A.B.C.D E.F.G.H The problem is about proxy, I need a proxy which would be function as transit between openser (private IP) and a router with a public IP (it should pass the NAT too). I have tested siproxd(http://siproxd.sourceforge.net/) for the case when it sits between the openser (public IP) and the users with private IP - and it works. In the first case siproxd doesn't want to work ( neither as a transparent sip proxy), openser sends INVITE to proxy, it replies 408 Request Time Out. The question is: can RTPproxy or mediaproxy help me in this case? Or maybe there is another solution to solve my problem? -- Best regards, Ion Minzu, mailto:ion.minzu@cts.md

4 7

[Users] About Openser version 1.2 (doubts, questions, contribution)
by Danilo Vilela Dantas 24 Jan '07

24 Jan '07

Hi, we are working on a VoIP project and we will use OpenSER as a SIP proxy. This project needs presence and instant message funcionality. We checked out and compiled the CVS HEAD version of OpenSER, but we have a few questions: 1. The modules that implements this two funcionalities (Presence and IM) are ok to use? 2. If question 1 is no, what problems could we have ? Is there any list of bug reports? 3. Is there any date for version 1.2 to be released ? 4. Can we contribute to OpenSER Project ? Thank you very much and Best regards Danilo Vilela Researcher Inovax Engenharia de Sistemas Rio de Janeiro, Brazil

2 1

[Users] Problem for using presence agent using MSN messenger
by neil thomson 24 Jan '07

24 Jan '07

Hi All, I have installed the openser server on linux machine. I followed the procedure given in the link http://www.openser.org/index.php?option=com_content&task=view&id=26&Itemid=… . The server is running fine, but when I try to connect a client (MSN messenger v 5.1) the subscribe message is failing. I have installed the mysql database also given in the website http://openser.org/pub/openser/latest/packages/rhel-3.0/ . The detailed steps I followed are given below. Thanks in advance, Neil

2 1

[Users] avp_db_query, NULL AVP?
by Brandon Armstead 24 Jan '07

24 Jan '07

Hello everyone, How is this possible? I have the table usr_preferences, this query runs fine: if(avp_db_query("SELECT value FROM usr_preferences WHERE username = '$fU' AND attribute = 'e911'", "$avp(i:911)")), in other words if I take the query that should be constructed here, and is constructed here, and I run it in mysql cli, I get back a result, however this function "does not" create the AVP for me, no matter what I do, I run this, and I run xlog("L_INFO", "the avp \$avp(i:911) equals.... $avp(i:911)"); however it says its NULL every single time, what am I doing wrong, I've read and reread the AVP documentation over a million times, however can not get this simply working, all help is appreciated, thank you. -- Brandon Armstead

2 2

[Users] SMS module modem diagnosis
by Cristian Caprar 24 Jan '07

24 Jan '07

How can I diagnose a problem in the SMS module when opening a modem? I see the following line in the log: DEBUG: modem_process: opening modem After about 5 minutes, I see the next one: ERROR:modem_process: cannot open modem Siemens_S45! Resource temporarily unavailable All happens in libsms_modem.c, line 423, where open() is called. The call blocks for about 5 minutes and afterwards I see the above error in the log. I tried to connect to the modem via minicom (on /dev/ttyS0) and everything is just fine. Thanks, Cristian

2 1

[Users] BUG: io_watch_del: invalid fd
by Dan-Cristian Bogos 24 Jan '07

24 Jan '07

Hi Guys, Since a while, I am getting problems with OpenSER while stopping. The error is bellow: Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 42, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 45, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 43, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 49, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 48, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 44, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 50, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 47, not in [0, 0) Jan 22 09:48:27 localhost /usr/local/sbin/openser[10018]: BUG: io_watch_del: invalid fd 51, not in [0, 0) If I will start and stop in the first 10 secs, the error will be not in, but stopping it later will always give out the error. I have seen a similar problem, here http://www.openser.org/pipermail/users/2006-September/006982.html, but no solution provided. Did anybody find anything which could help? Is this error serious enough to make me worry more? At a first glance, if I will stop openser, there will come a loot of errors in postgresql database, something related to not closing the sessions properly. My version: version: openser 1.1.0-tls (i386/linux) flags: STATS: Off, USE_IPV6, USE_TCP, USE_TLS, DISABLE_NAGLE, USE_MCAST, SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535 poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. @(#) $Id: main.c,v 1.20 2006/07/04 17:25:54 bogdan_iancu Exp $ main.c compiled on 20:52:20 Oct 10 2006 with gcc 3.3.5 Please let me know if I can help with further info or tests. Cheers, Dan

2 1

[Users] Newbie needs some (transparent) proxy help
by ryadave＠gmail.com 24 Jan '07

24 Jan '07

Hi I've just had a project dumped on me to build a sip proxy to sit in front of our Nortel MCS setup (and ultimately other VoIP gateways). Previous admin was supposed to have done this but he recently been given the boot and hadn't even touched this project from what I can see. And I'm a VoIP newbie which doesn't help much - keen to learn but defo a newbie Setup is fairly straight forward from what I can tell but I seem to be doing something completely wrong so seeking help. New sip proxy (OpenSER) is to sit in front of the MCS (and in time other boxes as I mentioned) and it should proxy traffic to/from the sip servers based on the end users realms/domains (i.e. 1234(a)test1.sip goes to server X and 1234(a)tes2.sip goes to server Y) - I'll need to add an authentication layer here but one step at a time. There's no NAT'ing or anything else going on - everything (clients, sip server & sip proxy) sits on public IP space. All I've been able to get to work so far is registration but can't make or receive calls. I've spend 2 days now trying to figure this out (newbie eh ?) and am under increading pressure from management to get this sorted so am getting desperate. I've googled this to death and tried all the various configs that sounded like they would do the job - but none have. I'm sure someone has already done this and would appreciate if you could share the config with me ? thanks dave

2 1

[Users] CALL FORWARD / PSTN GW
by Eduardo A. Pérez L. 24 Jan '07

24 Jan '07

Can you send how to remove the RPID or how to change it? Im having same problem

2 1

[Serusers] Info about my iptel.org blog
by Greger V. Teigre 24 Jan '07

24 Jan '07

Hi, As some of you might have seen (there's a link on the http://iptel.org/ main page), I keep a blog covering iptel.org related things. I comment on threads of particular on serusers and serdev, as well as report on status and my thoughts around iptel.org projects, up to now with a focus on SER and the upcoming new release. http://sipstuff.blogspot.com/ The intention is to improve communication about what is happening on iptel.org, as well as covering things of interest that is maybe not suited for the mailing lists or as a page on iptel.org. However, the posts and opinions are entirely mine and are by no means official attitudes or opinions of iptel.org. ;-) I encourage comments (comments are allowed in the blog), suggestions, discussions on the mailing lists, or private notes related to what I cover in the blog! Cheers, Greger aka g-)

1 0

[Users] TLS between Openser and UAs
by Jayesh Nambiar 23 Jan '07

23 Jan '07

Hi, I am trying to implement Openser with TLS. But my requirement is as follows: I wanted that all the UAs that register to my Openser Server should come through TLS and when I forward that call to my PSTN gateway it should go through UDP. While forwarding I understand that it can be done using t_relay_to_udp() but how can the first part be achieved. I needed that all the registrations and subsequent messages between Openser and UAs be in TLS. Is this possible, and if yes what all certificates will be required on my server side and the UA side? The documents only mention about TLS transport between servers/proxies. Please someone help me as I am new to TLS and my understanding related to TLS is not that good. Thanks, w/regards, Jayesh __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

2 1

[Users] Routing inbound calls
by Bill Neely 23 Jan '07

23 Jan '07

We are trying to route inbound calls with openser. In other words, I would like calls from DID 123-345-1234 to go to extension 123 and calls from DID 234-456-6789 to go to extension 234. I assume that lookup("aliases") is the way to do this. But I need an example of what would be in the aliases database. Any example would help. TIA. Bill -- 702-874-3833 1-866-553-3833

2 1

[Users] Please Advice!!
by Jayesh Nambiar 23 Jan '07

23 Jan '07

Hi, We are planning to use Openser in a large scale deployment. We are planning to stick to Linksys ATAs and IP Phones. Now all these phones have good NAT handling capablities. I just wanted to understand if it is better to handle these parameters on the UA side instead of Openser side. Will it cause some overhead to reduce at the Openser side. By using these UAs is it also possible to eliminate the use of Mediaproxy/RTPproxy at the Server side. I have the Openser working fine with Mediaproxy but I just wanted some expert suggestion from the people who are using these kind of UAs. Thanks, w/regards, Jayesh. __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

4 6

[Serusers] SERWEB Installation
by vincenzo mennella 23 Jan '07

23 Jan '07

Hi, I tried to install serweb 0.9.6 (as followed by the docs INSTALL and I've extract serweb directorys under /srv/www/htdocs default dir for apache 2) and ser 0.9.6 on SUSE 10.2 - Linux 2.6.18.2-34-default i686, mysql 5.0.26-12, php5 5.2.0-10, but now I can see the login page, but the problem is that when i try to put username and password in the localhost admin interface and then click "login" button, firefox 2.0 give me a another windows where I have to choose how to open index.php. I think that something is wrong. Can anybody help me? The contents of /var/log/apache2/error_log is: [Fri Jan 19 16:19:36 2007] [notice] child pid 6316 exit signal Segmentation fault (11) [Fri Jan 19 16:19:44 2007] [notice] child pid 6154 exit signal Segmentation fault (11) [Fri Jan 19 16:19:44 2007] [notice] child pid 6317 exit signal Segmentation fault (11) The contents of /var/log/serweb is : Jan 19 16:19:44 serweb [debug] User login: values from login form: username: admin@localhost, password: heslo Jan 19 16:19:44 serweb [debug] User login: checking password of user with username: admin, domain: localhost Jan 19 16:19:44 serweb [debug] User login: authentication succeeded, uuid: 4531d4cf51584ec6b48a59bcb5a34cef Jan 19 16:19:44 serweb [debug] User login: redirecting to page: users.php Jan 19 16:19:44 serweb [debug] User login: values from login form: username: admin@localhost, password: heslo Jan 19 16:19:44 serweb [debug] User login: checking password of user with username: admin, domain: localhost Jan 19 16:19:44 serweb [debug] User login: authentication succeeded, uuid: 4531d4cf51584ec6b48a59bcb5a34cef Jan 19 16:19:44 serweb [debug] User login: redirecting to page: users.php This is my PEAR LIST (installed with command pear install <package> Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.1 stable Auth_SASL 1.0.2 stable Console_Getopt 1.2 stable DB 1.7.7 stable HTML_Template_IT 1.2.1 stable HTTP 1.4.0 stable Log 1.9.9 stable MDB2 2.3.0 stable Mail 1.1.14 stable Net_SMTP 1.2.8 stable Net_Socket 1.0.6 stable Net_UserAgent_Detect 2.2.0 stable PEAR 1.4.11 stable XML_Parser 1.2.8 stable XML_RPC 1.5.1 stable classkit 0.4 beta These are some questions that I need to ask: 1. Have I to download another PEAR pachage ? 2. The problem is FIREFOX, APACHE 2 OR SERWEB ? 3. Have I to check another config file? Thank you very much Regards, vincenzo ___________________________________ Vinci i biglietti per FIFA World Cup in Germania! yahoo.it/concorso_messenger

3 5

Re: [Serusers] SERWEB Installation
by vincenzo mennella 23 Jan '07

23 Jan '07

I Arun I am not be able to start PHP 4 with your indication, because i have dependencies problem . thanks vincenzo --- Arun Kumar <arunvoip(a)gmail.com> ha scritto: > Hi, > > no need to remove php 5.x rpms just download the php > 4.x and apache compile > in their default location and then install serweb > using these php and > apache. > > thanks > > > On 1/21/07, vincenzo mennella <v_mennella(a)yahoo.it> > wrote: > > > > hi ARUN > > I will try , but I before have to unistall php5.2 > rpm > > package with YAST ( SUSE) and then install php4. > Is it > > correct ? > > > > Can I use this version php 4.4.4. at this link ?: > > http://www.php.net/downloads.php > > > > vincenzo > > > > --- Arun Kumar <arunvoip(a)gmail.com> ha scritto: > > > > > Hi, > > > > > > This version of PHP 5.x has some memory leak > problem > > > so I suggest you > > > install PHP 4.x and install you serweb same > trick > > > worked for me. > > > > > > thanks > > > > > > On 1/20/07, vincenzo mennella > <v_mennella(a)yahoo.it> > > > wrote: > > > > > > > > Hi ARUN > > > > I Tried this command: > > > > #PHP -v > > > > PHP 5.2.0 with SUHOSIN-PATCH 0.9.6.1(CLI) > > > > zend engine v.2.2.0 > > > > Regards > > > > Thank you > > > > vincenzo > > > > > > > > --- Arun Kumar <arunvoip(a)gmail.com> ha > scritto: > > > > > > > > > what is the version of php you are using ? > > > > > > > > > > > > > > > On 1/19/07, vincenzo mennella > > > <v_mennella(a)yahoo.it> > > > > > wrote: > > > > > > > > > > > > Hi, > > > > > > I tried to install serweb 0.9.6 (as > followed > > > by > > > > > the > > > > > > docs INSTALL and I've extract serweb > > > directorys > > > > > under > > > > > > /srv/www/htdocs default dir for apache 2) > and > > > ser > > > > > > 0.9.6 on SUSE 10.2 - Linux > 2.6.18.2-34-default > > > > > i686, > > > > > > mysql 5.0.26-12, php5 5.2.0-10, but now I > can > > > see > > > > > the > > > > > > login page, but the problem is that when i > try > > > to > > > > > put > > > > > > username and password in the "localhost > admin > > > > > > interface" and then click "login" button, > > > firefox > > > > > 2.0 > > > > > > give me a another "windows" where I have > to > > > choose > > > > > > "how to open" index.php. I think that > > > something > > > > > is > > > > > > wrong. Can anybody help me? > > > > > > > > > > > > The contents of > /var/log/apache2/error_log > > > is: > > > > > > [Fri Jan 19 16:19:36 2007] [notice] child > pid > > > 6316 > > > > > > exit signal Segmentation fault (11) > > > > > > [Fri Jan 19 16:19:44 2007] [notice] child > pid > > > 6154 > > > > > > exit signal Segmentation fault (11) > > > > > > [Fri Jan 19 16:19:44 2007] [notice] child > pid > > > 6317 > > > > > > exit signal Segmentation fault (11) > > > > > > > > > > > > The contents of /var/log/serweb is : > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > values > > > > > from > > > > > > login form: username: admin@localhost, > > > password: > > > > > heslo > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > checking > > > > > > password of user with username: admin, > domain: > > > > > > localhost > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > > authentication succeeded, uuid: > > > > > > 4531d4cf51584ec6b48a59bcb5a34cef > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > redirecting > > > > > > to page: users.php > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > values > > > > > from > > > > > > login form: username: admin@localhost, > > > password: > > > > > heslo > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > checking > > > > > > password of user with username: admin, > domain: > > > > > > localhost > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > > authentication succeeded, uuid: > > > > > > 4531d4cf51584ec6b48a59bcb5a34cef > > > > > > Jan 19 16:19:44 serweb [debug] User login: > > > > > redirecting > > > > > > to page: users.php > > > > > > > > > > > > This is my PEAR LIST (installed with > command > > > pear > > > > > > install <package> > > > > > > > > > > > > Installed packages, channel pear.php.net: > > > > > > ========================================= > > > > > > Package Version > > > > > State > > > > > > Archive_Tar 1.3.1 > > > > > stable > > > > > > Auth_SASL 1.0.2 > > > > > stable > > > > > > Console_Getopt 1.2 > > > > > stable > > > > > > DB 1.7.7 > > > > > stable > > > > > > HTML_Template_IT 1.2.1 > > > > > stable > > > > > > HTTP 1.4.0 > > > > > stable > > > > > > Log 1.9.9 > > > > > stable > > > > > > MDB2 2.3.0 > > > > > stable > > > > > > Mail 1.1.14 > > > > > stable > > > > > > Net_SMTP 1.2.8 > > > > > stable > > > > > > Net_Socket 1.0.6 > > > > > stable > > > > > > Net_UserAgent_Detect 2.2.0 > > > > > stable > > > > > > PEAR 1.4.11 > > > > > stable > > > > > > XML_Parser 1.2.8 > > > > > stable > > > > > > XML_RPC 1.5.1 > > > > > stable > > > > > > classkit 0.4 > > > > > beta > > > > > > > > > > > > These are some questions that I need to > ask: > > > > > > 1. Have I to download another PEAR > > > pachage ? > > > > > > 2. The problem is FIREFOX, APACHE 2 > OR > > > SERWEB > > > > > ? > > > > > > 3. Have I to check another config > file? > === message truncated === ___________________________________ Vinci i biglietti per FIFA World Cup in Germania! yahoo.it/concorso_messenger

1 0

[Users] Support for T.38
by Max Gregorian 23 Jan '07

23 Jan '07

Hi, Does anyone know if OpenSER supports T.38 for Fax over IP? Or has anyone managed to get it to work? I did some quick tests and what I got was the destination Fax machine rang, but the fax message did not arrive. I don't think the destination fax picked up. Setup was: Fax (PC modem) -> IP Gateway -> OpenSER -> PSTN -> Fax machine Is it possible the Fax tones are not being properly generated by OpenSER, and so not being recognised by the Fax machine? (For reference, the Gateway used is advertised as supporting T.38)

3 3

[Users] About the realm
by Howard Tang 22 Jan '07

22 Jan '07

Hi, I have (silly) question about the realm for authenication which I am not able to fix it. Currently, i have the following config. if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("1.1.1.1", "subscriber")) { www_challenge("1.1.1.1", "0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); exit; }; consume_credentials(); save("location"); exit; }; if (method=="INVITE") { if (!proxy_authorize("1.1.1.1","subscriber")) { proxy_challenge("1.1.1.1","0"); exit; } if (!check_from()&& !does_uri_exist()) { sl_send_reply("403", "Use From=ID"); exit; } consume_credentials(); }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; My problem is user can only register or make phone call using 1.1.1.1 as a domain. I have setup a domain name on this ip address. for example sip.proxy.com. when i set up sip.proxy.com as the domain/proxy address in the UA, i was not able to register and received a 503 service unavailable. What do i need to do to allow user register using ip address or the host/domain name at the same time? currently i have it working for ip address only. In the subscriber tables-domain column, i have ip address for the users, do i need to add another entry with the domain name in the domain column instead of he ip address? if that is the case, i will have 2 username which the same number in the table. Please help. -- Howard Tang

2 1

[Users] Load Balancing
by raviprakash sunkara 22 Jan '07

22 Jan '07

Hello Users, How can I perform the load Balancing in My SIP server of Both OpenSER and Asterisk , Currently I have One OpenSER server and Asterisk Server, For OpenSER is to need use these modules, and is any 1) LCR and Dispatcher modules, 2) OSP Modules ( also need ) Please can anyone help me ...... -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

4 3

[Users] OpenSER v1.1.1 released
by Daniel-Constantin Mierla 22 Jan '07

22 Jan '07

Hello, version 1.1.1 of OpenSER has been released. It is an update of version 1.1.0 and includes the fixes for the issues discovered in version 1.1.0, therefore all people using 1.1.0 should upgrade to this new version. For people using sms, permissions, postgres, unixodbc, osp, it is highly recommended to move to this release, in the case no CVS updates were done after v1.1.0 (if you installed and maintain OpenSER from CVS, then you have to use branch rel_1_1_0, as it was for v1.1.0). The compatibility of the configuration file and database has been preserved (you do not need to do database reinstallation). Some details about v1.1.1 can be found at: http://www.openser.org/index.php?option=com_content&task=view&id=47&Itemid=… Detailed changelog: http://www.openser.org/pub/openser/1.1.1/ChangeLog Sources can be downloaded from: http://openser.org/pub/openser/1.1.1/ The documentation for modules is posted at: http://openser.org/docs/modules/1.1.x/ If someone wants to contribute with packages for different distros, please send the link from where can be downloaded to team(a)openser.org. Cheers, Daniel

2 1

[Serusers] ? presence ser 0.10.99? - db/db.c:83: Database driver 'mysql' not found
by tzieleniewski 22 Jan '07

22 Jan '07

HI!! I am working with the presence functionality. Today's morning I compiled the latest CVS source and after I run ser I received the following error: Jan 22 11:19:27 rd /home/ser/ser/ser-0.10.99/presence/ser[3861]: ERROR: db/db.c:83: Database driver 'mysql' not found Jan 22 11:19:27 rd /home/ser/ser/ser-0.10.99/presence/ser[3861]: uri_db:mod_init: Unable to bind to the database module Jan 22 11:19:27 rd /home/ser/ser/ser-0.10.99/presence/ser[3861]: init_mod(): Error while initializing module uri_db my ser.cfg looks like this: .. loadmodule "/home/ser/src/sip_router/modules/uri/uri.so" loadmodule "/home/ser/src/sip_router/modules/uri_db/uri_db.so" loadmodule "/home/ser/src/sip_router/modules/rls/rls.so" loadmodule "/home/ser/src/sip_router/modules/pa/pa.so" loadmodule "/home/ser/src/sip_router/modules/presence_b2b/presence_b2b.so" ... modparam("domain|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") I have the previous version of ser running as proxy+registrar and there is no such error. Waiting for Your help:) Bests TOmasz

2 1

[Users] Comapring keywords in openser...
by Premnath, KN 22 Jan '07

22 Jan '07

Hi, How to compare core keywords in openser? I wanted to compare to_uri and uri is same.. Eg: if(uri == to_uri)... But there is a syntax error thrown, stating "only myself or string" can be compared... Then could I use if(uri=="$to_uri") Thank You. With warm regards, Premnath, KN The new company Nokia Siemens Networks is expected to start operations in the first quarter of 2007, subject to customary regulatory approvals, the completion of standard closing conditions, and the agreement of a number of detailed implementation steps. Disclaimer: This e-mail may contain trade secrets or privileged, undisclosed or otherwise confidential information. If you have received this e-mail in error, you are hereby notified that any review, copying or distribution of it is strictly prohibited. Please inform us immediately and destroy the original transmittal. Thank you for your cooperation.

2 1

[Users] Asterisk Integration
by Víg Pál 22 Jan '07

22 Jan '07

Hi List members, I am planning to bulid a system for large scale deployment. Looking at Openser features and Asterisk capabilities I decided to build a system on these platforms, but faced the problem of integration. What is the best method of integration ? I read some columns in the docs, and can not decide... I came from the network world and can understand protocols and IP communication quite well. I think I should do the following : CLIENT <---> Internet <---> Openser machines (load balanced) <---> Asterisk machines (behind NAT, also load balanced, doing mainly codec conversion and switching logic) My guesses are : - use dispatcher on the frontend(s) - do not use dispatcher, but rewrite the packets by some programmatical way - any other solution ? I'd like to spare some energy on this not to start developing some not working solution ;) Thanks in advance, Pal Vig

2 1

[Users] avp_check
by Bruno Machado 22 Jan '07

22 Jan '07

Hi. Is it possible to use a avp variable in functions' second parameter when I'm using regular expression? For instance: avp_check("$ruri","re/sip:$avp(s:prefix).*$") I didn't see any code doing that. Thanks in advance. Bruno __________________________________________________ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/

2 1

[Users] Grandstream weirdness.
by Shane Burrell 21 Jan '07

21 Jan '07

Not sure if this is related to signaling or openser but I have a few grandstreams that lock up a similar times that have there signaling done via openser. Doesn't seem to happen with Asterisk. Basically the grandstream seems to hang. Has anyone seen this? Something I should to do keep the grandstream awake? TIA Shane

3 2

[Serusers] MySQL Accounting
by Rosa De Santis 20 Jan '07

20 Jan '07

Hello all. I have accounting with MySQL working fine. I have records on my acc table. Please, I'd like to know if there is a tool to process the acc table entries to get completed calls on another MySQL table, taking into account missing BYEs or CANCELs. I found that CDRtool can do this and more, but its not free and it seems to be complicated. Thanks in advance for any help Rosa. _________________________________________________________________ Descubre Live.com - tu mundo en línea reunido: noticias, deportes, el tiempo, y mucho más. http://www.live.com/getstarted

2 1

[Users] Best practice for DNS failover using OpenSER?
by Kerker Staffan 19 Jan '07

19 Jan '07

Hi I'm trying to get something to work that I thought should work out of the box, but when implemented didn't work the way I thought it would... Please comment. I'm using OpenSER as a core SIP proxy, among other things to connect to a POTS network via two independent Cisco PGW2200 SS7 GW. These gateways have fully DNS resolvable SIP domains (rfc 3263, NAPTR, SRV and A records). NAPTR (udp only) => SRV (udp only) => 2x A records (one for each redundant GW). Calls directed to POTS nicely load shares between the two A records. So far so good. Now, if I disable one of the Gateways, I hang every second call. OpenSER does not try the second A record address if the first doesn't answer. How can I solve this? Shouldn't OpenSER fail over to the second A record listed in the NAPTR => SRV resolving? Or will OpenSER continue to resend all SIP INVITES until timers fire? Would it help if the proxy recieved an ICMP port/destination unreachable from the network? Is there anyway to get around this? In the other direction, from POTS to sip, the PGW2200 nicely switches over to the second of my two OpenSER servers if I shut one of them down. These servers have the same DNS entries (but for another SIP domain, NAPTR => SRV => 2x A record). I would love some best practice implementation clues regarding OpenSER and multiple GW fail over, if anyone of you have such knowledge or experience. Best regards, /Staffan --- Staffan Kerker, Saab Communication Ljungadalsgatan 2, 35180 Växjö, Sweden p. +46 470 42185 c. +46 705 391365 m. staffan.kerker(a)saabgroup.com w. http://www.saabgroup.com

8 16

[Users] patch release openser 1.1.1
by Daniel-Constantin Mierla 19 Jan '07

19 Jan '07

Hello, we plan to release a patch update to 1.1.0, numbered 1.1.1 at the beginning of the next week. It will be a packaging of the current version of the branch rel_1_1_0. People using OpenSER from cvs are already using this if they did 'cvs update' recently, but those using packages released for 1.1.0 from htpp://openser.org should update to it. This is a query to gather any know issues you are aware of, to include them there. There is not going to be any backport, major release 1.2.0 not being too far. Cheers, Daniel

2 1

[Users] avp type field
by Mark Price 19 Jan '07

19 Jan '07

Hi, I found documentation for what the type column means (i.e. possible values and what they imply), but can't seem to find it. Maybe that could be documnted in http://www.openser.org/docs/OpenSER_Database_Structure.html or http://www.openser.org/docs/modules/1.1.x/avpops.html Also, is there a reason why the datatype of the type field is int(11)? 11 seems like an odd number. Mark

2 1

[Serusers] Config for presence on 0.10
by Jens-Martin Groenne 19 Jan '07

19 Jan '07

Hi, Is there an updated config example with presence for 0.10? I find that the example in the presence handbook is outdated. Kind regards, Jens-Martin Groenne

2 1

[Users] ADDON: new nathelper parameter
by Bogdan-Andrei Iancu 18 Jan '07

18 Jan '07

Hi everybody, Thanks to a contribution from Jeremie, nathelper module offers the possibility to configure the "a=nortpproxy:yes\r\n" string. This is a string marker added by nathelper when rtpproxy is enabled. The new "nortpproxy_str" parameter: http://www.openser.org/docs/modules/1.2.x/nathelper.html#AEN217 allows you to both change or disable this string marker. For more see: http://openser.org/pipermail/users/2006-September/006519.html regards, Bogdan

4 7

[Users] allow trusted proxies with dynamic IPs
by Cristian Caprar 18 Jan '07

18 Jan '07

Hi, Is it possible to allow_trusted some PSTN gateways which have a dynamic IP address? >From what it looks like, the trusted table only allows the usage of a source IP address. A hostname that is DNS resolvable or an IP/mask pair would solve this. What can be done? Thanks, Cristian

2 4

[Users] $hdr($avp(s:name))
by JF 18 Jan '07

18 Jan '07

Hi all, Is there support for dynamic avp/hdr names, like $hdr($avp(s:name)) I'm getting <null> when I try this... and I've checked that $avp(s:name) has a valid header name (Contact). Thanks, JF

2 3

[Users] User Registration Security on Openser
by Howard Tang 18 Jan '07

18 Jan '07

Hi, I realized some one is able to make call and registered to my sip proxy while he/she is not in the subscriber table. I couldn't find his/her username in the subscriber table, but i was able to see him/her in the location table. I am able to see he/she made 10 calls from my sip proxy. Anyone have an idea on what i have done wrong? I have included the authentication part of code here. if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("x.x.x.x", "subscriber")) { www_challenge("x.x.x.x", "0"); exit; }; consume_credentials(); save("location"); exit; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("x.x.x.x","0"); exit; } consume_credentials(); }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; -- Howard Tang

5 5

[Serusers] Resource List Notification Problem
by raj gopal 18 Jan '07

18 Jan '07

Hi, I have configured apache and SER as described in presence hand book. I am facing some problem in group resource list subscription and notification. SUBSCRIBE sip:venkatfriends@10.187.83.218 SIP/2.0 Supported: eventlist Subject: Subscription Request Via: SIP/2.0/UDP 10.187.83.222:5061;rport;branch=z9hG4bK08652 Max-Forwards: 70 To: <sip:venkatfriends@10.187.83.218> From: <sip:venkat@10.187.83.218>;tag=z9hG4bK42075489 Call-ID: 382598915012(a)10.187.83.222 CSeq: 1 SUBSCRIBE Contact: <sip:venkat@10.187.83.222:5061> Expires: 7200 User-Agent: XXXXXXXXXXXXXXX Event: presence Content-Length: 0 Accept: application/pidf+xml,multipart/related,application/rlmi+xml SIP/2.0 200 OK Via: SIP/2.0/UDP 10.187.83.222:5061;rport=5061;branch=z9hG4bK08652 To: <sip:venkatfriends@10.187.83.218 >;tag=c20c251a135762f9e7a5a4d8e6d1fe64-93f1 From: <sip:venkat@10.187.83.218>;tag=z9hG4bK42075489 Call-ID: 382598915012(a)10.187.83.222 CSeq: 1 SUBSCRIBE Require: eventlist Contact: <sip:10.187.83.218:5060> Expires: 6200 Server: Sip EXpress router (0.10.99-dev64 (i386/linux)) Content-Length: 0 NOTIFY sip:venkat@10.187.83.222:5061 SIP/2.0 Via: SIP/2.0/UDP 10.187.83.218;branch=z9hG4bK7fa8.3ee87012.0 To: <sip:venkat@10.187.83.218>;tag=z9hG4bK42075489 From: <sip:venkatfriends@10.187.83.218 >;tag=c20c251a135762f9e7a5a4d8e6d1fe64-93f1 CSeq: 10 NOTIFY Call-ID: 382598915012(a)10.187.83.222 Content-Length: 340 User-Agent: Sip EXpress router(0.10.99-dev64 (i386/linux)) Subscription-State: active;expires=6200 Contact: <sip:10.187.83.218:5060> Max-Forwards: 70 Event: presence Require: eventlist Content-Type: multipart/related;type="application/rlmi+xml";start="qwW388551513pPdxX1615182410";boundary="RewXdpxR742478745xA757064664"; --RewXdpxR742478745xA757064664 Content-Transfer-Encoding: binary Content-ID: qwW388551513pPdxX1615182410 Content-Type: application/rlmi+xml;charset="UTF-8" <?xml version="1.0"?> <list xmlns="urn:ietf:params:xml:ns:rlmi" uri=" sip:venkatfriends@10.187.83.218" version="0" fullState="true"> </list> --RewXdpxR742478745xA757064664-- I have created all entries in resource-list.xml and service entry in index file. But, the server sends NOTIFY with no resource list entries and doesn't give any error messages. I am using full-no-failover.cfg configuration file. Whats wrong here ?????? Can anyone help me.... -Venkat

2 1

[Users] SipSAK with OpenSER
by Bill Neely 18 Jan '07

18 Jan '07

Received the following from Klaus a few weeks ago: Does anybody have an example of how to use sipsak with openser. Does openser call sipsak, or is it the other way around? Xantek, Inc. wrote: I am sure this must have been covered somewhere, but I cannot find it. I am trying to get openser to register with username and password and forward a call to that server. This is for outbound sip termination to the PSTN. openser is a proxy thus basically openser can'T do that. Now the good news. For registration at the termination provider you can use sipsak. For sending authentication credentials to the termination provider openser has the "uac" module. But be aware that this module does not always works as it does not increase the cseq when sending the INVITE with credentials (search the archive for details). E.g. the uac module wont work if the termination providers uses Asterisk (as Asterisk checks the cseq) regards klaus -- 702-874-3833 1-866-553-3833

3 2

[Users] CID insertion
by nick 18 Jan '07

18 Jan '07

I have my user authentication in a MYSQL database and use openser administrator to manage users. With every user I can add the Caller ID which ends up in the database (I've confirmed the existence in the DB). I'd like to add a Remote Party ID header into my calls directed to my PSTN termination provider (this is the header they want). I have had a look at the Auth module, and if I understood correctly, needed to add the lines modparam("auth", "rpid_avp", "i:13") to obtain the rpid field from the database and append_rpid_hf(); to actually add the RPID field to my outgoing INVITES, etc. however, I still can't see the header being added to the calls in outgoing SIP traces, and I have the feeling that I'm missing something fundamental.. I've tried also adding this line to load the credentials from the database: modparam("auth_db", "load_credentials", "rpid") Do I need to set the load credentials to be i:13=rpid to load the rpid field into the avp??? It's not 100% clear from the documentation where and how these avps are used (automatically if they're filled, or if they need to be somehow referenced in the function that uses them) and exactly which function is necessary (do I need the auth_db function or not?)..

2 2

[Users] Module Permissions
by Bruno Machado 18 Jan '07

18 Jan '07

Hi I'd like to use the 'permissions' module but there is a something I need to change: the table openser.trusted has a column that matches the 'From URI' with it (from_pattern). Is there a way to change it to RURI? I mean, I don't want to analyze the header From: I want the function 'allow_trusted()' matching the RURI instead. Is it possible? Thanks in advance. Bruno Machado __________________________________________________ Fale com seus amigos de graça com o novo Yahoo! Messenger http://br.messenger.yahoo.com/

2 1

Re: [Users] mi_xmlrpc - versions of dependancies for - libxml, libxmlrpc-c3, libxmlrpc-c3-dev
by Bogdan-Andrei Iancu 17 Jan '07

17 Jan '07

Hi Steven, yes, in the official distribution there is an older version of xmlrpc-c3. Not sure why this, but we decided to build the module against the version you currently find in all distro to avoid forcing the users to compile/install by hand additional software. regards, bogdan Steven Halerman wrote: >Thank you for the quick response. I didn't see >binaries for Fedora, so i downloaded the latest - >xmlrpc-c-1.06.09 (earlier versions would not cleanly >compile with GCC 3.4.4) from >http://sourceforge.net/projects/xmlrpc-c but it does >not have the xmlrpc_abyss.h file. Upon further >digging, i noticed in server_abyss.h, a note that >mentions > >Abyss contents handlers >xmlrpc_server_abyss_rpc2_handler() and >xmlrpc_server_abyss_default_handler() were available >in older Xmlrpc-c, but starting with Release 1.01, >they are not. Instead, call >xmlrpc_server_abyss_set_handlers() to install them. > >Steven > >--- Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> >wrote: > > > >>Hi Steven, >> >>I have libxmlrpc-c3-dev version 0.9.10-4 on a >>unstable debian and >>compiles with no problem. The "xmlrpc_abyss.h" file >>belong to the >>libxmlrpc-c3-dev package: >>/usr/include/xmlrpc_abyss.h could you check >>if you have this hdr file installed on your machine? >> >>regards, >>bogdan >> >>Steven Halerman wrote: >> >> >> >>>I have been trying to make mi_xmlrpc (from cvs >>> >>> >>head). >> >> >>>I am running Fedora Core 3 - gcc version 3.4.4 >>> >>>I get the following error: >>> >>>xr_server.c:37:26: xmlrpc_abyss.h: No such file or >>>directory >>>mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or >>>directory >>>In file included from >>>/usr/local/include/xmlrpc-c/base.h:9, >>> from >>> >>> >>/usr/local/include/xmlrpc.h:1, >> >> >>> from mi_xmlrpc.h:35, >>> from mi_xmlrpc.c:38: >>>/usr/local/include/xmlrpc-c/util.h:20:56: >>>xmlrpc-c/c_util.h: No such file or dir >>>ectory >>>In file included from >>>/usr/local/include/xmlrpc-c/base.h:9, >>> from >>> >>> >>/usr/local/include/xmlrpc.h:1, >> >> >>> from mi_xmlrpc.h:35, >>> from mi_xmlrpc.c:38: >>>/usr/local/include/xmlrpc-c/util.h:150: error: >>> >>> >>syntax >> >> >>>error before "GNU_PRINTF_A >>>TTR" >>>/usr/local/include/xmlrpc-c/util.h:158: error: >>> >>> >>syntax >> >> >>>error before "GNU_PRINTF_A >>>TTR" >>>mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or >>>directory >>>mi_xmlrpc.c: In function `mod_child_init': >>>mi_xmlrpc.c:156: warning: implicit declaration of >>>function `xmlrpc_server_abyss_ >>>init_registry' >>>mi_xmlrpc.c:166: error: >>>`xmlrpc_server_abyss_rpc2_handler' undeclared >>> >>> >>(first >> >> >>>use >>>in this function) >>>mi_xmlrpc.c:166: error: (Each undeclared identifier >>> >>> >>is >> >> >>>reported only once >>>mi_xmlrpc.c:166: error: for each function it >>> >>> >>appears >> >> >>>in.) >>>mi_xmlrpc.c:172: error: >>>`xmlrpc_server_abyss_default_handler' undeclared >>>(first >>>use in this function) >>>make[1]: *** [mi_xmlrpc.o] Error 1 >>> >>>what versions of >>> libxml >>> libxmlrpc-c3 >>> libxmlrpc-c3-dev >>>did you use to successfully compile? >>> >>>Thanks in advance >>>Steven >>> >>>

1 0

[Users] interrupts after 30 secconds
by Ion Minzu 17 Jan '07

17 Jan '07

Hello, I have a problem: When someone begins a call from PSTN to my voip network, the session interrupts after 30 secconds. The UA don't receive the ACK message(6)[the ACK doesn't arrive].The scheme below indicate this situation. P.S. This situation happens just with one type of equipment: atcom AG468; with other equipment (atcom AT320ED, audiocodes, atcom AG168) all works fine. Very strange. Thunks. |cisco-gateway| | openser | |UA's| X.X.X.X - public ip adress eth0-X.X.X.Y - public IP 172.17.6.0/24 | eth1-172.17.6.2 | | Invite | Invite | 1 |------------------------------->|----------------------------->| | Trying | Trying | 2 |<-------------------------------|<-----------------------------| | Ringing | Ringing | 3 |<-------------------------------|<-----------------------------| | PRACK | | 4 |------------------------------->| | | 200 ok | 200 ok | 5 |<-------------------------------|<-----------------------------| | ACK | | 6 |------------------------------->| | |................................|..............................|30 s | Bye | Bye | 7 |<-------------------------------|<-----------------------------| | 200 OK | | |------------------------------->| | | | | -- Best regards, Ion Minzu, Specialist Tehnologii Informationale, Administrator de sistem al Centrului de certificare, Administrator VoIP, I.S."Centrul de Telecomunicatii Speciale", tel:250-517 (office), 069501208 (mob), 382869185 (ICQ) mailto:ion.minzu@cts.md

5 5

[Users] Fwd: [kphone-users] New KPhone in the CVS
by Cesc 17 Jan '07

17 Jan '07

FYI ---------- Forwarded message ---------- From: Klaus Fleischmann <kgfleischmann(a)t-online.de> Date: Jan 16, 2007 7:01 PM Subject: [kphone-users] New KPhone in the CVS To: kphone-devel <kphone-devel(a)lists.sourceforge.net>, kphone-users <kphone-users(a)lists.sourceforge.net > Hi, last night I uploaded new code for kphoneSI, the most important features are: - SIMPLE presence: presence server support (PUBLISH, subscription to watcherlist) - SIMPLE presence end to end: After answered subsription, the buddy will be shown in the contact window (in red) even if he not subscribe us too. - new Call Widget design - help file and dtmf panels with own window - the last error message will be shown in the call widget instead of alarm windows - some more ALSA improvements - document and man page update If you are not used to CVS-downloads, see http://sourceforge.net/docman/?group_id=47742 or http://sourceforge.net/docman/display_doc.php?docid=34779&group_id=47742 for details. Yours Klaus ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ kphone-users mailing list kphone-users(a)lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/kphone-users

2 1

[Users] REMOVED: old fifo implementation
by Bogdan-Andrei Iancu 17 Jan '07

17 Jan '07

Hi everybody, the old fifo implementation (from core) was removed and replaced by the MI FIFO module. See http://www.openser.org/docs/modules/1.2.x/mi_fifo.html why? See: http://www.openser.org/pipermail/users/2006-December/008154.html To maintain the previous FIFO behaviour, you just have to: 1) remove "fifo=/tmp/openser_fifo" from your config 2) load the mi_fifo module 3) configure modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") that's all :) for an working example, see the default openser.cfg which was already updated: http://openser.cvs.sourceforge.net/openser/sip-server/etc/openser.cfg?revis… regards, bogdan

2 11

[Users] Rtpproxy and re-invites
by Joshua Laroff 17 Jan '07

17 Jan '07

Hello, I am new to openser and rtpproxy. I have tried to configure openser so that reinvites are also handled by rtpproxy. It seems however that they are not. I have included my config below: debug=9 fork=yes log_stderror=no check_via=no dns=no rev_dns=no port=5060 children=4 fifo="/tmp/openser_fifo" # ------------------ Module Loading Section ------------------------- mpath="/usr/lib/openser/modules/" loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "uri.so" loadmodule "uri_db.so" loadmodule "domain.so" loadmodule "nathelper.so" loadmodule "textops.so" loadmodule "avpops.so" loadmodule "permissions.so" loadmodule "options.so" #------------------- Module Parameters ----------------------------- modparam("auth_db|permissions|uri_db|usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") #--- nathelper params --- modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:8899") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_from", "sip:pinger@openser.org") #--- usrloc params --- modparam("usrloc", "db_mode", 2) #--- registrar params --- modparam("registrar", "nat_flag", 6) #--- rr params --- modparam("rr", "enable_full_lr", 1) #--- tm params --- modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "i:45") #--- permissions params --- modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") #------------------------ Main Routing Block ------------------------------ route { # ----------------------------------------- # Sanity check Section # ----------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; # ------------------------------------------- # Record Route Section # ------------------------------------------- if (method!="REGISTER") { record_route(); }; # ------------------------------------------- # Call Tear Down Section # ------------------------------------------- if (method=="BYE" || method=="CANCEL") { unforce_rtp_proxy(); }; # ------------------------------------------- # - Loose Route Section # ------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); exit; }; if (method=="INVITE") { if (!allow_trusted()) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); }; if (nat_uac_test("19")) { setflag(6); }; }; route(4); route(1); exit; }; # --------------------------------------------- # - Call Type Processing Section # --------------------------------------------- if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { route(4); route(1); } else { sl_send_reply("403", "Forbidden"); }; exit; }; if (method=="ACK") { route(1); exit; } if (method=="CANCEL") { route(1); exit; } else if (method=="INVITE") { route(3); exit; } else if (method=="REGISTER") { route(2); exit; } else if (uri==myself) { if (method==OPTIONS) { options_reply(); } } lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); exit; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); exit; }; route(1); } route[1] { # -------------------------------------------- # - Default Message Handler # -------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { unforce_rtp_proxy(); }; sl_reply_error(); }; } route[2] { # -------------------------------------------- # - REGISTER Message Handler # -------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && nat_uac_test("19")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); exit; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ------------------------------------------------ # - INVITE Message Handler # ------------------------------------------------ if (!allow_trusted()) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); exit; }; consume_credentials(); }; if (nat_uac_test("19")) { setflag(6); }; if (uri=~"^sip:1[0-9]{10}@") { strip(1); }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(5); exit; }; if (uri=~"^sip:011[0-9]*@") { # International PSTN route(4); route(5); exit; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { # Domestic PSTN route(4); route(5); exit; }; sl_send_reply("404", "User Not Found"); exit; }; route(4); route(5); } route[4] { # --------------------------------------- # - NAT Traversal Section # --------------------------------------- if (isflagset(6)) { force_rport(); fix_nated_contact(); force_rtp_proxy(); }; } route[5] { # ---------------------------------------- # - PSTN GATEWAY Handler # ---------------------------------------- rewritehost("204.x.x.x"); # avp_write("i:45", "inv_timeout"); route(1); } onreply_route[1] { # --------------------------------------- # - REPLY ROUTE # --------------------------------------- if (isflagset(6) && status=~"(180)|(183)|2[0-9][0-9]") { if (!search("^Content-Length:[ ]*0")) { force_rtp_proxy(); } } if (nat_uac_test("1")) { fix_nated_contact(); }; }

2 1

[Users] mi_xmlrpc - versions of dependancies for - libxml, libxmlrpc-c3, libxmlrpc-c3-dev
by Steven Halerman 17 Jan '07

17 Jan '07

I have been trying to make mi_xmlrpc (from cvs head). I am running Fedora Core 3 - gcc version 3.4.4 I get the following error: xr_server.c:37:26: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or directory In file included from /usr/local/include/xmlrpc-c/base.h:9, from /usr/local/include/xmlrpc.h:1, from mi_xmlrpc.h:35, from mi_xmlrpc.c:38: /usr/local/include/xmlrpc-c/util.h:20:56: xmlrpc-c/c_util.h: No such file or dir ectory In file included from /usr/local/include/xmlrpc-c/base.h:9, from /usr/local/include/xmlrpc.h:1, from mi_xmlrpc.h:35, from mi_xmlrpc.c:38: /usr/local/include/xmlrpc-c/util.h:150: error: syntax error before "GNU_PRINTF_A TTR" /usr/local/include/xmlrpc-c/util.h:158: error: syntax error before "GNU_PRINTF_A TTR" mi_xmlrpc.c:44:26: xmlrpc_abyss.h: No such file or directory mi_xmlrpc.c: In function `mod_child_init': mi_xmlrpc.c:156: warning: implicit declaration of function `xmlrpc_server_abyss_ init_registry' mi_xmlrpc.c:166: error: `xmlrpc_server_abyss_rpc2_handler' undeclared (first use in this function) mi_xmlrpc.c:166: error: (Each undeclared identifier is reported only once mi_xmlrpc.c:166: error: for each function it appears in.) mi_xmlrpc.c:172: error: `xmlrpc_server_abyss_default_handler' undeclared (first use in this function) make[1]: *** [mi_xmlrpc.o] Error 1 what versions of libxml libxmlrpc-c3 libxmlrpc-c3-dev did you use to successfully compile? Thanks in advance Steven ____________________________________________________________________________________ Cheap talk? Check out Yahoo! Messenger's low PC-to-Phone call rates. http://voice.yahoo.com

2 1

[Serusers] inv_timeout from DB
by inge 17 Jan '07

17 Jan '07

Hi all, I learn about it in the archive, but I don't really get the good way. If I put in a usr_preferences table like, a value like i:40, how can I learn it and write into the inv_timeout ? I'm not very far of the good result, but this is the point where I block. Thanks for your support.

1 1

[Serusers] Ser 0.10.x CVS and MySQL module
by Daniel Corbe 17 Jan '07

17 Jan '07

For some reason the mysql module for ser compiled cleanly but SER refuses to load it. IE # ser -c 0(28131) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: Cannot load specified object 0(28131) parse error (55,13-14): failed to load module ERROR: bad config file (1 errors) It does exist, is installed and was compile from the same sources as the SER core. I'm not sure what I'm doing wrong. Thanks. -Daniel

3 6

[Users] RTP without proxying, Linksys 3102
by Bill Neely 16 Jan '07

16 Jan '07

Has anyone come up with a method for getting a NATED Linksys 3102 to talk to another NATED UA? I see that it has something to do with the 3102 being a symmetric NAT device. I have tried setting fix_nated_register and force_rport, but this doesn't do it (still no RTP going back and forth). I know we could fix this by setting up a proxy server, but we have bandwidth reasons for not wanting to do this. Can provide openser.cfg if anyone would like to look at it. -- 702-874-3833 1-866-553-3833

2 2

[Users] SER Accounting
by Arun Kumar 16 Jan '07

16 Jan '07

Hi, My ser and asterisk are working fine and able to send calls each other. When my ser sends call to my asterisk, my asterisk ask for pin to place call but as soon as it ask for pin ser starts accouting (ack). Is there any why that my accounting starts only when it connects to actual number that I want to dial. thanks arun

3 5

[Users] SER wrong accounting
by Arun Kumar 16 Jan '07

16 Jan '07

Hi, I've configured my ser to send calls to my asterisk server and doing well. When call reaches to my asterisk server, asterisk will ask for pin to place a call. Here is my question: When I place it sends invite to my asterisk and accounting will store this invite time and when asterisk ask for pin (ack) my ser stores this as ack time and when I disconnect the call (bye) it will store the bye time. But my call is not connected to my actual number. Is there any why that accounting only start when actual call get connect. thanks arun

3 3

[Serusers] MetaSwitch
by Bill Hissong 16 Jan '07

16 Jan '07

Anyone have SER talking to MetaSwitch? I am looking for pointers on the MetaSwitch as well as SER. I have them talking, just not nicely. Bill

1 0

[Users] openser+freeradius+mysql
by yuan zhao 16 Jan '07

16 Jan '07

Hi all, I use the document to build l the system with openser+freeradius+mysql( http://www.openser.org/docs/openser-radius-1.0.x.html), +---------+ +---------+ | PHONE 1 | <--SIP-- + +-------------------+ | STORAGE | +---------+ | SIP SERVER | +----+----+ #===> | (OpenSER) | | ........... | |-------------------| +-------+-------+ | | RADIUS CLIENT|<==AAA==> | RADIUS SERVER | +---------+ | | (radiusclient-ng) | | (FreeRADIUS) | | PHONE N |<--SIP--+ +-------------------+ +---------------+ +---------+ I have two linux PCs.the one install Openser and radius client ,and another install freeradius and DATABASE of mysql .But the document said the Openser also need mysql ,then I have a question, what is the function about the mysql of openser? Maybe it can place the users inforamtion of register,but for freeradius, what about the function ? Then I have another question,I install the system step by step with the document ,and the ua can register correctly,but a few minutes it will break down, the ua said it's time out ,can you give me some suggestion ?can I find other openesr+ freeradius documents except *openser-radius-1.0.x.html* . thaks.

2 1

[Users] Accessing data from reply route in failure route
by T.R. Missner 16 Jan '07

16 Jan '07

Hello, I have a need to pass info contained in a X-header within a 300 message to the failure-route or branch-route for inclusion in a new INVITE which results from the redirect. Is there a mechanism available that would allow me to do this? AVPs are not available in the reply route. Thanks, T.R.

3 2

[Users] NEW FEATURE: branch and script flags
by Bogdan-Andrei Iancu 16 Jan '07

16 Jan '07

Hi everybody, Following some discussions with Juha regarding some extension for the branch flags, we decided it is better to have a re-design of flags in openser to allow a better flexibility and extensibility without any consistency penalties. What we had so far: - message flags (or transaction flags) which are transaction persistent - pseudo-branch flags - a set of flags from the message flags were handled by TM as branch flags (saved per branch and not only per transaction). What we have now: - message flags (or transaction flags) will works as they do now, but the branch mask will be removed (rolling back as in 0.9.x versions). These flags are transaction persistent. - branch flags (NEW) are saved also in transaction, but per branch; also they will be saved in usrloc (per contact). A new set of functions were added for manipulating these flags from script. So, there flags will be registration persistent and branch persistent. - script flags (NEW) are no-message-related flags - they are only script persistent and you can strictly use them for scripting. Once you exit a top level route, they will be lost. These flags are useful and they offer an option to de-congest the message flags - many flags have no need to be saved as they just reflect some scripting status. What changes brings this: - NAT flag will become a branch flag all the time. - you can have custom flags to be saved into usrloc (via branch flags). - more flags in script (via script flags). Corresponding Functions: Message/transaction flags: setflag(flag_idx) resetflag(flag_idx) isflagset(flag_idx) Branch flags: setbflag/setbranchflag(branch_idx,flag_idx) resetbflag/resetbranchflag(branch_idx,flag_idx) isbflagset/isbranchflagset(branch_idx,flag_idx) or, the shorter format, working on the default (branch 0) flags: setbflag(flag_idx) resetbflag(flag_idx) isbflagset(flag_idx) Script flags: setsflag/setscriptflag(flag_idx) resetsflag/resetscriptflag(flag_idx) issflagset/isscriptflagset(flag_idx) Flags and Pseudo Variables Message/transaction flags $mf (decimal) , $mF (hexa) Branch flags $bf (decimal) , $bF (hexa) Script flags $sf (decimal) , $sF (hexa) Flags and routes: Message/transaction flags These flags will show up in all routes where messages related to the initial request are processed. So, they will be visible and changeable in onbranch, failure and onreply routes; the flags will be visible in all branch routes; if you change a flag in a branch route, the next branch routes will inherit the change. Branch flags There flags will show up in all routes where messages related to initial branch request are processed. So, in branch route you will see different sets of flags (as they are different branches); in onreply route yo will see the branch flags corresponding to the branch the reply belongs to; in failure route, the branch flags corresponding to the branch the winning reply belongs to will be visible. In request route, you can have multiple branches (as a result of a lookup(), enum query, append_branch(), etc) - the default branch is 0 (corresponding to the RURI); In reply routes there will be only one branch , the 0 one. In branch route the default branch is the current process branch (having index 0); In failure route, initialy there is only one branch (index 0), corresponding the the failed branch. Script flags There flags are available only in script and are reset after each top level route execution (routes internally triggered by OpenSER). They will be persistent per main route, onreply_route, branch_route, failure_route. Note they will be inherit in routes called from other routes. Example: nat flag handling .......... # 3 - the nat flag modparam("usrloc","nat_bflag",3) .......... route { .......... if (nat detected) setbflag(3); # set branch flag 3 for the branch 0 .......... if (is_method("REGISTER")) { # the branch flags (including 3) will be saved into location save("location"); exit; } else { # lookup will load the branch flag from location if (!lookup("location")) { sl_send_reply("404","Not Found"); exit; } t_on_branch("1") t_relay(); } } onbranch_route[1] { xlog("-------branch=$T_branch_idx, branch flags=$bF\n"); if (isbflagset(3)) { #current branch is marked as natted ......... } } if no parallel forking is done, you can get rid of the branch route and add instead of t_on_branch(): ........ if (isbflagset(3)) { #current branch is marked as natted ......... } ......... I will upload this description on the wiki page to be more accessible - in the mean while, any feedback (reports, better ideas, bugd) are welcome! Regards, Bogdan

4 6

[Serusers] [Fwd: problem with german characters with exec_msg]
by Shazad 16 Jan '07

16 Jan '07

I want to add something... the IM sends an text which is an txtfile, generated with an java program, started by the shell script... exec_msg->shell script-> java->txtfile (the characters are replaced already here not in IM)->Instant Message But starting the java program direct or with the shell script the characters are not replaced..only with SER the problem occurs Hope someone give me some hint. Thanks

1 0

[Serusers] problem with german characters with exec_msg
by Shazad 16 Jan '07

16 Jan '07

Hello ! I got an problem with the exec_msg function. When I use it to start an shell script which sends an Instant Message with german characters the Instant Message arrives to the UA with special german characters replaced with "?" symbol ... When I start the shell script manually on the shell , the error does not occur. I dont know , whether there exists special parameters for exec module or the the exec_msg function to set. Can someone tell me, hoe I can solve the problem with , that the SER doesnt replace special german characters with an "?" . Thanks ___________________________________________________________ Der frühe Vogel fängt den Wurm. Hier gelangen Sie zum neuen Yahoo! Mail: http://mail.yahoo.de

1 0

[Users] No memory left errors and Private Memory Size
by Max Gregorian 16 Jan '07

16 Jan '07

Firstly, Happy New Year to all, I am seeing quite a few of these memory errors in the openser log file: *build_contact(): No memory left*. These seem to be occurring when the UA tries to register with Openser. In the last instance I saw, this lasted almost half an hour before clearing up. So I guess what I am trying to find out really is: 1. Is this related to the Private memory size issue I remember reading about a while ago? I am using Openser 1.0.1 and so far have not messed with the default memory size settings from the sources I downloaded. The link on the Openser website about increasing Private memory seems to imply that this could be what is producing these errors. (I refer to this link - http://openser.org/dokuwiki/doku.php/troubleshooting:private-memory-size). 2. Also, if I really have to increase the private memory, I would like to know how to go about it. Since I already have openser installed and the server is already in use, do I have to wipe the server and partitions and re-install the modified Openser or is there an easier way? Can I just recompile the sources and re-install openser over the previous one and get it to overwrite the existing directory (without experiencing any problems with left over files)? 3. How much Private memory is enough to stop these errors? For example, for a system with 1GB of installed RAM should it be using say 768MB? 4. Finally, can anyone tell me the difference between *private memory* and *share memory* in this context? The only difference I am aware of is to do with, for example, shared graphics memory (e.g. for onboard graphics cards on some systems which use up some amount of installed physical RAM memory instead of their own onboard graphics memory). Is this the same thing? Sorry if some of these questions sound a bit basic but I'm coming from a Windows background. Thanks in advance.

5 6

[Users] something wrong with the OpenSER's install
by chenlu 16 Jan '07

16 Jan '07

hi,I meet trouble about the installing of OpenSER.when I download the code with CVS,I use 'make all',a moment later,there is something happened: openserunix.o(.text+0x8f): In function `main': /usr/local/src/openser-1.0.1/sip-server/utils/openserunix/openserunix.c:73: warning: the use of `tmpnam' is dangerous, better use `mkstemp' make[1]: Leaving directory `/usr/local/src/openser-1.0.1/sip-server/utils/openserunix' How can I do ? Need your help,my friends.

2 1

[Users] Openser with Asterisk
by Naveen 16 Jan '07

16 Jan '07

Dear Users, Can some one please post me the sample configuration guide to configure Openser with asterisk? Thanks and regards Naveen

2 1

[Users] can not connect mysql
by chenlu 16 Jan '07

16 Jan '07

hi,my friends,I want to ask you a question,when I exec thish command '/usr/local/sbin/openser_mysql.sh create',then it has something wrong that ' ERROR 2002(HY000):Cannot connect to local MySQL server through socket ‘/var/lib/mysql/mysql.sock ',I do not know how to do with it,need your help.

2 1

[Serusers] make 'ing lib (xcap, presence, cds) - compling errors
by "tzieleniewski" 16 Jan '07

16 Jan '07

Hi! I was trying to compile the latest cvs sources of ser. As always before compiling ser I tried to compile and make presence stuff contained in lib directory. I need the latest cvs in order to use modparam("pa", "auth_xcap_root", "http://localhost/xcap-root/voip.touk.pl/"). Unfortunatelly there were some errors which I didn't have with my previous version of ottendorf (perhapse i missed something - please help mewith this one): ser@rd:~/src/sip_router/lib$ pwd /home/ser/src/sip_router/lib ser@rd:~/src/sip_router/lib$ make Making in cds make[1]: Wejście do katalogu `/home/ser/src/sip_router/lib/cds' cc -shared -Wall -I/home/ser/src/sip_router/lib -I/home/ser/src/sip_router/lib/cds/.. -o libcds.so cds.o dbid.o dstring.o hash_table.o memory.o msg_queue.o ptr_vector.o ref_cntr.o rr_serialize.o serialize.o ser_profile.o simple_profile.o sip_utils.o sstr.o vector.o -L/home/ser/src/sip_router/lib/cds -L/home/ser/src/sip_router/lib/qsa /usr/bin/ld: cds.o: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC cds.o: could not read symbols: Bad value collect2: ld returned 1 exit status make[1]: *** [libcds.so] Błąd 1 make[1]: Opuszczenie katalogu `/home/ser/src/sip_router/lib/cds' make: *** [cds] Błąd 2 and ser@rd:~/src/sip_router/lib$ make -f Makefile.ser install prefix="/home/ser/ser/ser-0.10.99" Making install in cds make[1]: Wejście do katalogu `/home/ser/src/sip_router/lib/cds' cc -shared -DNAME='"ser"' -DVERSION='"0.10.99-dev64"' -DARCH='"x86_64"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_x86_64 -D__OS_linux -DSER_VER=10099 -DCFG_DIR='"/home/ser/ser/ser-0.10.99/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DHAVE_SELECT -DSER -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -minline-all-stringops -falign-loops -ftree-vectorize -mtune=opteron -Wall -Wall -I/home/ser/src/sip_router/lib -I/home/ser/src/sip_router/lib/.. -ldl -lresolv -L/home/ser/src/sip_router/lib/cds -L/home/ser/src/sip_router/lib/qsa -o lib_ser_cds.so cds.o dbid.o dstring.o hash_table.o memory.o msg_queue.o ptr_vector.o ref_cntr.o rr_serialize.o serialize.o ser_profile.o simple_profile.o sip_utils.o sstr.o vector.o /usr/bin/ld: cds.o: relocation R_X86_64_32 against `a local symbol' can not be used when making a shared object; recompile with -fPIC cds.o: could not read symbols: Bad value collect2: ld returned 1 exit status make[1]: *** [lib_ser_cds.so] Błąd 1 make[1]: Opuszczenie katalogu `/home/ser/src/sip_router/lib/cds' make: [cds] Błąd 2 (zignorowany) Making install in xcap make[1]: Wejście do katalogu `/home/ser/src/sip_router/lib/xcap' cc -shared -DNAME='"ser"' -DVERSION='"0.10.99-dev64"' -DARCH='"x86_64"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_x86_64 -D__OS_linux -DSER_VER=10099 -DCFG_DIR='"/home/ser/ser/ser-0.10.99/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DHAVE_SELECT -DSER -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -minline-all-stringops -falign-loops -ftree-vectorize -mtune=opteron -Wall -Wall -I/home/ser/src/sip_router/lib -I/home/ser/src/sip_router/lib/.. -I/usr/include/libxml2 -ldl -lresolv -L/home/ser/src/sip_router/lib/cds -L/home/ser/src/sip_router/lib/qsa -lxml2 -l_ser_cds -o lib_ser_xcap.so common_policy.o msg_rules.o parse_common_rules.o parse_msg_rules.o parse_pres_rules.o pres_rules.o resource_list.o resource_lists_parser.o rls_services_parser.o xcap_client.o xml_utils.o /usr/bin/ld: cannot find -l_ser_cds collect2: ld returned 1 exit status make[1]: *** [lib_ser_xcap.so] Błąd 1 make[1]: Opuszczenie katalogu `/home/ser/src/sip_router/lib/xcap' make: [xcap] Błąd 2 (zignorowany) Making install in presence make[1]: Wejście do katalogu `/home/ser/src/sip_router/lib/presence' cc -shared -DNAME='"ser"' -DVERSION='"0.10.99-dev64"' -DARCH='"x86_64"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.1.2"' -D__CPU_x86_64 -D__OS_linux -DSER_VER=10099 -DCFG_DIR='"/home/ser/ser/ser-0.10.99/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_EPOLL -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DHAVE_SELECT -DSER -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -minline-all-stringops -falign-loops -ftree-vectorize -mtune=opteron -Wall -Wall -I/home/ser/src/sip_router/lib -I/home/ser/src/sip_router/lib/.. -I/usr/include/libxml2 -ldl -lresolv -L/home/ser/src/sip_router/lib/cds -L/home/ser/src/sip_router/lib/qsa -lxml2 -l_ser_cds -o lib_ser_presence.so domain_maintainer.o lpidf.o notifier_domain.o pidf.o pres_doc.o qsa.o qsa_params.o utils.o xml_utils.o xpidf.o /usr/bin/ld: cannot find -l_ser_cds collect2: ld returned 1 exit status make[1]: *** [lib_ser_presence.so] Błąd 1 make[1]: Opuszczenie katalogu `/home/ser/src/sip_router/lib/presence' make: [presence] Błąd 2 (zignorowany) Bests TOmasz

2 3

[Serusers] About getting started chapter.9
by Sho Aihara 16 Jan '07

16 Jan '07

hello, I tried to test SER with GettingStarted.pdf document, But now I have trouble on "Chapter 9. PSTN Gateway Connectivity". I made ser.cfg like this chapter. Then I try to restart SER, SIP clients didn't authorize. Here is trace log. 2(3926) SIP Request: 2(3926) method: <REGISTER> 2(3926) uri: <sip:191.0.0.2> 2(3926) version: <SIP/2.0> 2(3926) parse_headers: flags=1 2(3926) Found param type 232, <branch> = <z9hG4bK-d87543-3e309a0333127c58-1--d87543->; state=6 2(3926) Found param type 235, <rport> = <n/a>; state=17 2(3926) end of header reached, state=5 2(3926) parse_headers: Via found, flags=1 2(3926) parse_headers: this is the first via 2(3926) After parse_msg... 2(3926) preparing to run routing scripts... 2(3926) parse_headers: flags=128 2(3926) DEBUG:maxfwd:is_maxfwd_present: value = 70 2(3926) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 2(3926) parse_headers: flags=256 2(3926) end of header reached, state=9 2(3926) DEBUG: get_hdr_field: <To> [40]; uri=[sip:8580002@191.0.0.2] 2(3926) DEBUG: to body ["8580002"<sip:8580002@191.0.0.2> ] 2(3926) get_hdr_field: cseq <CSeq>: <1> <REGISTER> 2(3926) DEBUG: get_hdr_body : content_length=0 2(3926) found end of header 2(3926) find_first_route: No Route headers found 2(3926) loose_route: There is no Route HF 2(3926) is_local(): Realm '191.0.0.2' is not local 2(3926) DEBUG: add_param: tag=f7391c78 2(3926) end of header reached, state=29 2(3926) is_local(): Realm '191.0.0.2' is not local 2(3926) parse_headers: flags=-1 2(3926) check_via_address(1910.0.2, 192.168.1.20, 0) 2(3926) DEBUG:destroy_avp_list: destroying list (nil) 2(3926) receive_msg: cleaning up Ip address 192.168.1.20 is SIP client (CounterPath X-Lite) and 191.0.0.2 is SER's. And I added "191.0.0.2" ip address for "trusted" table (MySQL database). Someone can help me? Thanks --------- Aihara sahria.hao(a)gmail.com

1 0

[Serusers] parameter <auth_xcap_root> not found in module <pa> - ser 0.10.99
by "tzieleniewski" 16 Jan '07

16 Jan '07

Hi! I am trying to enable ser working as the presence server.I use the lastest CVS version I doing everything according to the cookbook and get the following errors when I check the ser.cfg file: ser@rd:~/ser/ser-0.10.99/presence$ ./ser -c -f no-db.ser.cfg 0(23175) set_mod_param_regex: parameter <xcap_root> not found in module <rls> 0(23175) parse error (58,20-21): Can't set module parameter 0(23175) set_mod_param_regex: parameter <auth_xcap_root> not found in module <pa> 0(23175) parse error (69,20-21): Can't set module parameter ERROR: bad config file (2 errors) the corresponding lines in the ser.cfg look like this: loadmodule "/home/ser/src/ser-0.10.99/modules/rls/rls.so" loadmodule "/home/ser/src/ser-0.10.99/modules/pa/pa.so" ... modparam("rls", "xcap_root", "http://localhost/xcap-root/voip.touk.pl") modparam("pa", "auth_xcap_root", "http://localhost/xcap-root/voip.touk.pl") and here are the xcap files: ser@rd:~/xcap/xcap-root$ pwd /home/ser/xcap/xcap-root ser@rd:~/xcap/xcap-root$ find . -print . ./voip.touk.pl ./voip.touk.pl/pres-rules ./voip.touk.pl/pres-rules/users ./voip.touk.pl/pres-rules/users/tzl ./voip.touk.pl/pres-rules/users/tzl/presence-rules.xml ./voip.touk.pl/pres-rules/users/template ./voip.touk.pl/pres-rules/users/template/presence-rules.xml ./voip.touk.pl/pres-rules/users/common ./voip.touk.pl/pres-rules/users/common/presence-rules.xml ./voip.touk.pl/im-rules ./voip.touk.pl/im-rules/users ./voip.touk.pl/im-rules/users/tzl ./voip.touk.pl/im-rules/users/tzl/im-rules.xml ./voip.touk.pl/im-rules/users/template ./voip.touk.pl/im-rules/users/template/im-rules.xml ./voip.touk.pl/im-rules/users/common ./voip.touk.pl/im-rules/users/common/im-rules.xml ./voip.touk.pl/rls-services ./voip.touk.pl/rls-services/global ./voip.touk.pl/rls-services/global/index ./voip.touk.pl/resource-lists ./voip.touk.pl/resource-lists/users ./voip.touk.pl/resource-lists/users/tzl ./voip.touk.pl/resource-lists/users/common ./voip.touk.pl/resource-lists/users/common/resource-list.xml ./voip.touk.pl/resource-lists/users/template ./voip.touk.pl/resource-lists/users/template/resource-list.xml I ask for your help. Bests TOmasz

2 1

[Users] FYI: CPLEd new release
by Bogdan-Andrei Iancu 16 Jan '07

16 Jan '07

Hi everybody. there were a lot of people asking about CPLEd, if it still available, still under development, etc.....so here is a new release: CPLEd 0.4.0 "reborn" The project was revived on SF: https://sourceforge.net/projects/cpled/ documentation, CVS access, release downloads, tracker are available on the project site. Also a new mailing list is available: cpled-users(a)lists.sourceforge.net Regards, Bogdan

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users