- sr-users - kamailio.org

[Serusers] ser fifo
by Müller Thorsten 20 Oct '05

20 Oct '05

Hi all, is it possible to distinguish between messages coming out of a network and messages coming from the ser-fifo? I get SIP-messages from the fifo and I would like to treat them differently from messages of hte network in ser.cfg! Thanks Thorsten

1 0

[Serusers] ser-mysql-problem
by rupesh boyana 20 Oct '05

20 Oct '05

hello ser users, i am trying to insert mysql and authorisation modules in to ser. i want to control the user logins. after refering to the SER getting started document i have loaded mysql and auth etc.. modules in to the ser.cfg. then i tried creating the database 'ser' with 'subscriber' table and "username , domain , password" as fields. but when i used the command "serctl add 1000 password user1@nowhere" it is giving the following error "SER/FIFO not accessible: 2". then when i started SER , i got the following messages in /var/log Oct 20 16:57:30 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.247 Oct 20 16:57:30 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.247 Oct 20 16:57:30 localhost ser[7006]: Maxfwd module- initializing Oct 20 16:57:30 localhost ser[7007]: WARNING: no fifo_db_url given - fifo DB commands disabled! i am giving my ser.cfg file: #debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@192.168.1.247/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@192.168.1.247/ser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #modparam("pa","default_expires",1800) #modparam("pa","timer_interval",10) #modparam("pa","use_db",0) #modparam("pa","use_place_table",0) #modparam("pa","use_bsearch",0) #modparam("pa","use_location_package",0) #modparam("pa","pa_domain","bigU.edu") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { #rupesh code start if (method=="INVITE") { route(2); break; } else if (method=="REGISTER") { # Uncomment this if you want to use digest authentication sl_send_reply("100", "Trying"); if (!www_authorize("192.168.1.247", "subscriber")) { www_challenge("192.168.1.247", "0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if(!save("location")) { sl_reply_error(); }; break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } route[2] { if(!proxy_authorize("192.168.1.247","subscriber")) { proxy_challenge("192.168.1.247","0"); break; } else if(!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(): lookup("aliases"); if(uri!=myself) route(1); break; }; if(!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } hope some one can give me some guidance regarding the same, thank you, Rupesh

1 0

[Serusers] Does postgresql-8.0.4 compatible with ser-0.9.4?
by Chia Huey Lim 20 Oct '05

20 Oct '05

Hi list, Does postgresql-8.0.4 compatible with ser-0.9.4? Although /lib/ser/modules/postgres.so exists, I have got this error ERROR: load_module: could not open module </lib/ser/modules/postgres.so>: libpq.so.4: cannot open shared object file: No such file or directory Regards, Chia -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 / Virus Database: 267.12.4/143 - Release Date: 10/19/2005

2 1

[Users] Problems with ACC
by deviator deviator 20 Oct '05

20 Oct '05

I have Openser 0.9.5, works fine and i want to use acc debug=3 fork=yes log_stderror=no listen=212.XXX.XXX.XXX # This is where OpenSER installed port=5060 children=4 dns=no rev_dns=no fifo="/tmp/openser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/acc.so" modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("auth_db", "use_domain", 1) modparam("domain", "db_mode", 1) modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 180) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/openser/sip-asymmetric-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/openser/rtp-asymmetric-clients") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1) modparam("registrar", "default_expires", 60) modparam("registrar", "min_expires", 30) modparam("registrar", "nat_flag", 6) modparam("registrar", "use_domain", 1) modparam("rr", "enable_full_lr", 1) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "failed_transactions", 1) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) --------------------- on starting i receive 2 errors: (15583) set_mod_param_regex: parameter <db_flag> not found in module <acc> (15583) parse error (59,19-20): Can't set module parameter (15583) set_mod_param_regex: parameter <db_url> not found in module <acc> (15583) parse error (60,20-21): Can't set module parameter ERROR: bad config file (2 errors) pls help me, what i'm doing wrong ????

2 1

[Serusers] Third party Registrations in SER proxies
by sandeep kamath 20 Oct '05

20 Oct '05

Hi, I had posted this query to the SIP implementors mailing list . So for those who have not read this let me summarise the problem. "I wanted to know if there is a mechanism where registration information could be shared among SIP proxies.wrt to SER . This is helpful in a farm that is being loadbalanced. The topology is a vserver that has two SER proxies S1 and S2 on UDP. A client 'A' sends a register request to the loadbalancer vip/vserver and the load balancer chooses a service S1 tied on the vip/vserver . The client is registered at the server S1. Now a new call comes for this client, hits the vip and the call hashes to the other service S2 bound to the vip. If S1 and S2 are not sharing the same DB or are not talking to the same registrar we will have a problem. " As a solution Dale R. Worley from pingtel suggested that A SIP registrar can actively duplicate its information into another SIP registrar by doing third-party REGISTERs to it . So my question is how do I set up this third party Registration mechanism in SER so that a client registers with one proxy and inturn the proxy transfers this registration info to other participating proxies? thanks, sandeep

1 0

[Users] Persistently storing headers from onreply_route()?
by Joachim Fabini 20 Oct '05

20 Oct '05

Hi again, Having solved the previous topic using Bogdan's hint I stumbled straight into a new problem. Is there a workaround for not being able to use the avp-ops from onreply_route? Some details on the reason: We implement the Service- Route extension according to RFC 3608. The registrar returns in the 200OK a ServiceRoute header where all proxies on the (return) path register themselves. The last proxy (that forwards the 200 OK to the UA) is supposed to store the ServiceRoute locally. Our plan was straight-forward: to store the header field's content via avp-ops from within the onreply_route. Unfortunately avp-ops are not available in onreply_route - Bogdan explains the reason why in <http://www.archivum.info/serdev%40iptel.org/2005-02/msg00274.html> Is there a specific reason why the access to the avp list is not synchronized? Performance? Basically, provided a good description of the implementation and concept, imho it could be left to users to restrict themselves to have avpops writes in only in their onreply_routes for a specific avp pair. Or, provide synchronized avps? So, does anyone have an idea how we can: - Store an AVP containing header fields extracted from a 200 OK message - Retrieve this AVP on incoming invites in order to place these values into the message (security check and/or Route enforcement). Thanks in advance, best regards --Joachim

2 6

[Users] Newbie
by Glenn MacGregor 20 Oct '05

20 Oct '05

Hi All, I have just installed openser 0.9.5 I have connected in a simple test case. Now I am trying to implement the nathelper an I can no longer login with my sip client. My openser box is not behind a firewall, but the clients I am using are. I copies the config file for nat+rtpproxy from onsip.org. It starts fine and sees rtpproxy, but when I try to login I get check_response(): Our result = '62ae83e04a67107edf9981943597e4c2' 0(8432) check_response(): Authorization is OK 0(8432) check_username(): Digest username and URI username do NOT match 0(8432) parse_headers: flags=-1 I have tried everything I can think of to solve this problem, No luck. Any help would be great! Thanks Glenn Glenn MacGregor HighStreet Networks ------------------------------------------------- This mail sent through IMP: http://horde.org/imp/

2 1

Re: [Serusers] AVPS NEED HELP!
by Pol Novell Balcells 20 Oct '05

20 Oct '05

> What i want to do is to overwrite TO header from his numeric alias, > for example. > if i call to user.user(a)mydomain.com i wannt to forward this call to > asterisk changing to header from his alias -> 12341(a)mydomain.com > because asterisk is expected to read user part from sip call and > check voicemail. > > Is any other way to acomplish it? > Regards. > > >> >> Okay... first things first. While there is a LITTLE flexibility, >> AVPops >> actually relies heavily on the FORMAT of the table you want to >> load/store data >> from. For this reason, the alias table isn't really the best thing >> to grab >> from. You COULD specify the attribute and value columns and such >> manually... >> but it would be a right pain in the ass, I can tell you that. >> >> >> What EXACTLY are you trying to do? Perhaps there's another way to >> go about it. >> >> N. >> >> On Wed, 19 Oct 2005 23:50:10, pol novell balcells wrote >> >> >>> Hi SerUsers! >>> I'm completly crazy tryin' to do the following: >>> I just want to load from DB user alias and rewrite it into "$to >>> $ruri", because these calls shoud go directly to asterisk >>> voicemail >>> and they are numerical not alphanumeric. >>> i tried to do the following: >>> >>> if(avp_db_load($alias/$username,i:alias") >>> avp_pushto("$ruri/$to","alias") >>> just to load from alias table username into an integer called alias >>> and then pushed to new $ruri. >>> >>> I'm new in ser and avps module it's really usefull but a little bit >>> "unreadable", plz this should work for tomorrow :$ any help >>> plz!? >>> be as much especific as can, because i don't know if i have done >>> the >>> proper modparams. >>> these are: >>> >>> modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ >>> ser") >>> modparam("avpops", "avp_table", "usr_preferences") >>> #modparam("avpops", "use_domain", "1") >>> modparam("avpops", "uuid_column", "uuid") >>> modparam("avpops", "username_column", "username") >>> modparam("avpops", "domain_column", "domain") >>> modparam("avpops", "attribute_column", "attribute") >>> modparam("avpops", "value_column", "value") >>> modparam("avpops", "type_column", "type") >>> >>> THX >>> >>> ____________________________________________________________________ >>> _ >>> Mensaje analizado y protegido, tecnologia antivirus >>> www.trendmicro.es >>> >>> _______________________________________________ >>> Serusers mailing list >>> serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >>> >>> >> >> >> _____________________________________________________________________ >> Mensaje analizado y protegido, tecnologia antivirus www.trendmicro.es >> >> > > _____________________________________________________________________ Mensaje analizado y protegido, tecnologia antivirus www.trendmicro.es

1 0

[Serusers] call drops after about 30 seconds
by Fernando Schmitt 20 Oct '05

20 Oct '05

Check if the both endpoints are receiving the packets properly and also, if your billing system is working properly. Some bad formed packets may result in call drop. Fernando Schmitt -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of serusers-request(a)lists.iptel.org Sent: quarta-feira, 19 de outubro de 2005 08:00 To: serusers(a)lists.iptel.org Subject: Serusers Digest, Vol 30, Issue 19 Send Serusers mailing list submissions to serusers(a)lists.iptel.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.iptel.org/mailman/listinfo/serusers or, via email, send a message with subject or body 'help' to serusers-request(a)lists.iptel.org You can reach the person managing the list at serusers-owner(a)lists.iptel.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Serusers digest..." Today's Topics: 1. Re: mangling request URI according to To: and userlocation value (Francesco Fondelli) 2. call drops after about 30 seconds (maka) 3. 423 message for Register Expires (share phone) 4. SIP Dialer Sending Many BYE Packets (sagar) 5. Re: [OT] MAX TNT as a Media Gateway (Vamsi Pottangi) 6. Can I send Binary Data through SIP IM? (Abhijit A. Mahajani) 7. How many BHCC? (Matteo Piazza) ---------------------------------------------------------------------- Message: 1 Date: Tue, 18 Oct 2005 14:11:11 +0200 From: Francesco Fondelli <francesco.fondelli(a)gmail.com> Subject: [Serusers] Re: mangling request URI according to To: and userlocation value To: serusers(a)lists.iptel.org Message-ID: <4354E65F.5030601(a)gmail.com> Content-Type: text/plain; charset=us-ascii; format=flowed > and assume that entry in userloc has a "Server: Bar 1.0 PBX" value sorry, here I meant the "User-Agent: 'Bar 1.0 PBX'" entry. thank you very much Ciao FF ------------------------------ Message: 2 Date: Tue, 18 Oct 2005 15:32:30 +0300 From: maka <icokan(a)gmail.com> Subject: [Serusers] call drops after about 30 seconds To: SER <serusers(a)lists.iptel.org> Message-ID: <826761540510180532v4683e151x2a9a6ba209f1061d(a)mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" hello everyone, I am using ser-0.9.0 together wit asterisk-1.0.6. I am testing it with a couple of hardware AT-320 IP phones from Atcom, using a PA168S chip. They seem to be working fine, with stun behind nat, and they can call other user-agents (softphones, asterisk adn the pstn through it), but whenever I make a call between the two phones, everytime the call is dropped after about 34 seconds, even when calling between phones on Public IP addresses. I am actually clueless why this happens, I tried changing the NAT ttl value, bu to no effect, and it is not supposed to be a codec mismatch too since both phones use absolutely the same codecs, in the same order of preference. Appreciate the feedback, cheers -- I'm sick and tired of being sick and tired...

1 0

[Serusers] AVPS NEED HELP!
by pol novell balcells 20 Oct '05

20 Oct '05

Hi SerUsers! I'm completly crazy tryin' to do the following: I just want to load from DB user alias and rewrite it into "$to $ruri", because these calls shoud go directly to asterisk voicemail and they are numerical not alphanumeric. i tried to do the following: if(avp_db_load($alias/$username,i:alias") avp_pushto("$ruri/$to","alias") just to load from alias table username into an integer called alias and then pushed to new $ruri. I'm new in ser and avps module it's really usefull but a little bit "unreadable", plz this should work for tomorrow :$ any help plz!? be as much especific as can, because i don't know if i have done the proper modparams. these are: modparam("avpops", "avp_url", "mysql://ser:heslo@localhost/ ser") modparam("avpops", "avp_table", "usr_preferences") #modparam("avpops", "use_domain", "1") modparam("avpops", "uuid_column", "uuid") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") THX _____________________________________________________________________ Mensaje analizado y protegido, tecnologia antivirus www.trendmicro.es

2 1

[Users] Re: group_radius radius_is_user_in
by Tavis P 19 Oct '05

19 Oct '05

Sorry, i always tend to think more than i write/talk What i meant was that you can pass the necessary information during the authentication using the auth_radius module or during feature request using the avp_radius depending on what you are trying to do with the feature Lenir wrote: >I will try that as a workaround. > >For the SER-DEVEL and OPENSER-DEVEL guys...can any of you comment on this? > >Thanks > >-----Original Message----- >From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >Sent: Wednesday, October 19, 2005 4:40 PM >To: Lenir >Cc: users(a)openser.org; serusers(a)iptel.org >Subject: Re: group_radius radius_is_user_in > >I've never used the group_radius module so i'm not certain what it >expects from the radius server (its not well documented currently) > >Although you may be able to optimize a bit and skip the >radius_is_user_in function call and simply pass the users group back as >an SIP-AVP attribute in the radreply table, and then check for that AVP >in the OpenSER script > >What i've done is commented the group checking SQL from the freeradius >sql.conf file so that when a user authenticates or when an avp_radius >call is made only 2 SQL queries are sent, instead of the 4-5 used when >group check is enabled. > >Try this, it should work and it will save you ~10 sql queries and a >radius request/response > > >Lenir wrote: > > > >>I'm trying to use group_radius module to check if the user is in a >>particular radius group. I'm calling radius_is_user_in function to do this. >>Here is the snippet in my config that calls that function: >> >>route[2] { >> >> # ----------------------------------------------------------------- >> # REGISTER Message Handler >> # ---------------------------------------------------------------- >> sl_send_reply("100", "Trying"); >> >> if (!radius_www_authorize("")) { >> xlog("L_INFO","$ci - $fu - User not authenticated, Radius >>Authenticating...\n"); >> www_challenge("","0"); >> return; >> } else { >> xlog("L_INFO","$ci - $fu - User authenticated...\n"); >> }; >> >> if (radius_is_user_in("From", "Dialin")){ >> xlog("L_INFO","From: User is in Radius Group >> >> >Dialin!!!!\n"); > > >> } else { >> xlog("L_INFO","From: User *IS NOT* Group Dialin!!!!!\n"); >> }; >> >> if (radius_is_user_in("From", "Dialin2")){ >> xlog("L_INFO","From: User is in Radius Group >>Dialin2!!!!\n"); >> } else { >> xlog("L_INFO","From: User *IS NOT* Group Dialin2!!!!!\n"); >> }; >> >> #if (!radius_check_to()) { >> # sl_send_reply("401", "Unauthorized"); >> # return; >> #}; >> >> consume_credentials(); >> >> if (!save("location")) { >> sl_reply_error(); >> }; >>} >> >> >>-----Original Message----- >>From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >>Sent: Wednesday, October 19, 2005 3:59 PM >>To: Lenir >>Cc: users(a)openser.org; serusers(a)iptel.org >>Subject: Re: group_radius radius_is_user_in >> >>Well either way the radius server is going to respond with an >>"Access-Accept" because you have set the auth-type to "none" (which is >>necessary because you are not authenticating and can not provide the >>necessary credentials). >> >>>From the trace you showed me below, i see two radius requests both for >>the user 1000 and both of which respond as i would expect. >> >>I'm not what you are trying to accomplish, are you using the >>group_radius module or just loading the group information using avp_radius? >> >> >>Lenir wrote: >> >> >> >> >> >>>This is my users file: >>> >>>DEFAULT Auth-Type = System >>> Fall-Through = 1 >>> >>>DEFAULT Service-Type == Call-Check, Auth-Type := None >>> >>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Session, Auth-Type := Digest >>> >>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None >>> >>> >>>mysql> select * from radcheck; >>>+----+----------+-----------+----+----------+ >>>| id | UserName | Attribute | op | Value | >>>+----+----------+-----------+----+----------+ >>>| 1 | Jhassell | Password | == | changeme | >>>| 2 | Rneis | Password | == | changeme | >>>| 3 | 1000 | Password | == | 1000 | >>>| 4 | 2000 | Password | == | 2000 | >>>| 5 | 3000 | Password | == | 3000 | >>>+----+----------+-----------+----+----------+ >>>5 rows in set (0.00 sec) >>> >>>mysql> select * from radreply; >>>Empty set (0.00 sec) >>> >>>mysql> select * from usergroup; >>>+----+----------+------------+ >>>| id | UserName | GroupName | >>>+----+----------+------------+ >>>| 1 | Jhassell | Dialin | >>>| 2 | Rneis | Staticdial | >>>| 3 | 1000 | Dialin | >>>| 4 | 2000 | Dialin | >>>| 5 | 3000 | Dialin | >>>| 6 | 3000 | Dialin2 | >>>+----+----------+------------+ >>>6 rows in set (0.00 sec) >>> >>>mysql> select * from radgroupcheck; >>>Empty set (0.00 sec) >>> >>>mysql> select * from radgroupreply; >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>---+ >>>| id | GroupName | Attribute | op | Value | >>>prio | >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>----+ >>>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >>>0 | >>>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >>>0 | >>>| 3 | Dialin | SIP-AVP | = | Sip-Group:Dialin | >>>0 | >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>----+ >>>3 rows in set (0.00 sec) >>> >>>mysql> select * from radpostauth; >>>Empty set (0.00 sec) >>> >>> >>> >>>Here's the debug, notice how it returns access-accept whether its in the >>>right group or not. Shouldn't it return access-reject for group Dialin2? >>>----------------- >>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=152, >>>length=66 >>> User-Name = "1000(a)xx.xx.xx.xx" >>> Sip-Group = "Dialin" >>> Service-Type = Group-Check >>> NAS-IP-Address = 127.0.0.1 >>> NAS-Port = 0 >>>Processing the authorize section of radiusd.conf >>>modcall: entering group authorize for request 4 >>>modcall[authorize]: module "preprocess" returns ok for request 4 >>>modcall[authorize]: module "chap" returns noop for request 4 >>>modcall[authorize]: module "mschap" returns noop for request 4 >>>modcall[authorize]: module "digest" returns noop for request 4 >>> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>"1000(a)xx.xx.xx.xx" >>> rlm_realm: Found realm "xx.xx.xx.xx" >>> rlm_realm: Adding Stripped-User-Name = "1000" >>> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>> rlm_realm: Adding Realm = "xx.xx.xx.xx" >>> rlm_realm: Authentication realm is LOCAL. >>>modcall[authorize]: module "suffix" returns noop for request 4 >>>rlm_eap: No EAP-Message, not doing EAP >>>modcall[authorize]: module "eap" returns noop for request 4 >>> users: Matched entry DEFAULT at line 156 >>> users: Matched entry DEFAULT at line 161 >>>modcall[authorize]: module "files" returns ok for request 4 >>>radius_xlat: '1000' >>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>>radcheck WHERE Username = '1000' ORDER BY id' >>>rlm_sql (sql): Reserving sql socket id: 0 >>>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >>> >>> >>> >>> >>>FROM radcheck WHERE Username = '1000' ORDER BY id >> >> >> >> >>>radius_xlat: 'SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>>radreply WHERE Username = '1000' ORDER BY id' >>>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >>> >>> >>> >>> >>>FROM radreply WHERE Username = '1000' ORDER BY id >> >> >> >> >>>radius_xlat: 'SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id >>>rlm_sql (sql): Checking profile DEFAULT >>>rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >>>radius_xlat: 'SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>>radius_xlat: 'SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id >>>rlm_sql (sql): Released sql socket id: 0 >>>modcall[authorize]: module "sql" returns ok for request 4 >>>modcall: group authorize returns ok for request 4 >>>rad_check_password: Found Auth-Type None >>>rad_check_password: Auth-Type = Accept, accepting the user >>>radius_xlat: 'Authenticated by group Dialin' >>>Sending Access-Accept of id 152 to xx.xx.xx.xx:33167 >>> Reply-Message = "Authenticated by group Dialin" >>> SIP-AVP = "Sip-Group:Dialin" >>>Finished request 4 >>>Going to the next request >>>Waking up in 6 seconds... >>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=153, >>>length=67 >>> User-Name = "1000(a)xx.xx.xx.xx" >>> Sip-Group = "Dialin2" >>> Service-Type = Group-Check >>> NAS-IP-Address = 127.0.0.1 >>> NAS-Port = 0 >>>Processing the authorize section of radiusd.conf >>>modcall: entering group authorize for request 5 >>>modcall[authorize]: module "preprocess" returns ok for request 5 >>>modcall[authorize]: module "chap" returns noop for request 5 >>>modcall[authorize]: module "mschap" returns noop for request 5 >>>modcall[authorize]: module "digest" returns noop for request 5 >>> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>"1000(a)xx.xx.xx.xx" >>> rlm_realm: Found realm "xx.xx.xx.xx" >>> rlm_realm: Adding Stripped-User-Name = "1000" >>> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>> rlm_realm: Adding Realm = "xx.xx.xx.xx" >>> rlm_realm: Authentication realm is LOCAL. >>>modcall[authorize]: module "suffix" returns noop for request 5 >>>rlm_eap: No EAP-Message, not doing EAP >>>modcall[authorize]: module "eap" returns noop for request 5 >>> users: Matched entry DEFAULT at line 156 >>> users: Matched entry DEFAULT at line 161 >>>modcall[authorize]: module "files" returns ok for request 5 >>>radius_xlat: '1000' >>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>>radcheck WHERE Username = '1000' ORDER BY id' >>>rlm_sql (sql): Reserving sql socket id: 4 >>>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >>> >>> >>> >>> >>>FROM radcheck WHERE Username = '1000' ORDER BY id >> >> >> >> >>>radius_xlat: 'SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>>radreply WHERE Username = '1000' ORDER BY id' >>>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >>> >>> >>> >>> >>>FROM radreply WHERE Username = '1000' ORDER BY id >> >> >> >> >>>radius_xlat: 'SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = '1000' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id >>>rlm_sql (sql): Checking profile DEFAULT >>>rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >>>radius_xlat: 'SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc >>> >>> >h > > >>> >>> >>> >>> >>e >> >> >> >> >>>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>>radius_xlat: 'SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id' >>>rlm_sql_mysql: query: SELECT >>>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr >>> >>> >e > > >>> >>> >>> >>> >>p >> >> >> >> >>>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>>radgroupreply.GroupName ORDER BY radgroupreply.id >>>rlm_sql (sql): Released sql socket id: 4 >>>modcall[authorize]: module "sql" returns ok for request 5 >>>modcall: group authorize returns ok for request 5 >>>rad_check_password: Found Auth-Type None >>>rad_check_password: Auth-Type = Accept, accepting the user >>>radius_xlat: 'Authenticated by group Dialin' >>>Sending Access-Accept of id 153 to xx.xx.xx.xx:33167 >>> Reply-Message = "Authenticated by group Dialin" >>> SIP-AVP = "Sip-Group:Dialin" >>>Finished request 5 >>> >>>-----Original Message----- >>>From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >>>Sent: Friday, October 14, 2005 7:21 PM >>>To: Lenir >>>Cc: users(a)openser.org; serusers(a)iptel.org >>>Subject: Re: group_radius radius_is_user_in >>> >>>Ugh the subject line is getting really munged up ;P >>> >>>Hmmm, what does the output from "radiusd -X" look like for the exchange? >>> >>> >>>Lenir wrote: >>> >>> >>> >>> >>> >>> >>> >>>>Tavis, >>>> >>>>Thanks for your input, that did fix the problem. I did have the "files" >>>>before "sql" in radiusd.conf. Also I followed your advice about taking >>>> >>>> >out > > >>>>"Auth-Type" out of mysql table and let DEFAULT in users file do the >>>> >>>> >trick. > > >>>> >>>> >>>> >>>> >> >> >> >> >>>>However it's semi-working. >>>> >>>>Accourding to the snippet from my ser.cfg file, now I get the following >>>> >>>> >in > > >>>>stderr: >>>>0(4866) 000d2890-d47f0003-4a230347-53c6189b(a)yy.yy.yy.yy - >>>>sip:1000@xx.xx.xx.xx - User authenticated... >>>>0(4866) Credentials: User is in Radius Group Dialin!!!! >>>>0(4866) Credentials: User is in Radius Group Dialin2!!!! >>>> >>>>No matter which parameter I use for the function radius_is_user_in(), it >>>>always returns TRUE. When in fact it should return FALSE for Group >>>> >>>> >>>> >>>> >>Dialin2. >> >> >> >> >>>>I've tried: >>>> >>>>if (radius_is_user_in("From", "Dialin2")){... >>>>if (radius_is_user_in("Credentials", "Dialin2")){... >>>> >>>> >>>> >>>> >>>> >>>>Here's what I did to fix future problems: >>>> >>>>EFAULT Auth-Type = System >>>> Fall-Through = 1 >>>> >>>>DEFAULT Service-Type == Call-Check, Auth-Type := Digest >>>> >>>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>>> >>>>DEFAULT Service-Type == SIP-Session, Auth-Type := Digest >>>> >>>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>>> >>>>DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None >>>> >>>> >>>>Also, for those of you using the latest version of freeradius, you may >>>> >>>> >>>> >>>> >>have >> >> >> >> >>>>to comment out the following lines as they conflict with dictionary.ser >>>> >>>> >>>> >>>> >>>> >>>> >>>(SER >>> >>> >>> >>> >>> >>> >>>>CVS) and dictionary.sip (comes with radiusclient-NG) >>>> >>>>#VALUE Service-Type Voice 12 >>>>#VALUE Service-Type Fax 13 >>>>#VALUE Service-Type Modem-Relay 14 >>>>#VALUE Service-Type IAPP-Register 15 >>>>#VALUE Service-Type IAPP-AP-Check 16 >>>> >>>> >>>>Thanks, >>>> >>>> >>>>Lenir >>>> >>>> >>>>-----Original Message----- >>>>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On >>>>Behalf Of Tavis P >>>>Sent: Friday, October 14, 2005 1:49 PM >>>>To: lsantiago(a)globalgatewaycom.com >>>>Cc: serdev(a)iptel.org; serusers(a)iptel.org; devel(a)openser.org; >>>>users(a)openser.org >>>>Subject: [Serusers] Re: [Serdev] group_radius radius_is_user_in >>>> >>>>Oops, i spoke too soon >>>> >>>>It looks like you have placed the "files" module before the "sql" module >>>>in your radiusd.conf >>>> >>>>Its matching your DEFAULT entry in files (setting the Auth-Type to none) >>>>but the sql module is later changing the Auth-Type to "digest" >>>> >>>>Changing the order would solve this problem, as you want it to match the >>>>SQL statement first and than the section in the files last (which >>>>changes the Auth-Type) >>>> >>>>Also, you may want to reduce the load on your database by not setting >>>>the Auth-Type in the database and instead setting in the users file with >>>>a DEFAULT statement as (at least in my case) it isn't somthing that need >>>>to be dynamic. >>>> >>>>lenirsantiago(a)yahoo.com wrote: >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>>Hello list, >>>>> >>>>>I've been trying my hardest today to get group_radius to work, and its >>>>>function radius_is_user_in(). >>>>>I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>digest >>> >>> >>> >>> >>> >>> >>>>>authentication. >>>>> >>>>>Radius authentication works fine. >>>>>The problem is that when radius_is_user_in() function gets called, it >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>sends >>> >>> >>> >>> >>> >>> >>>>>a radius message but without the User-Password field and freeradius >>>>>complains that it requires it since we are using Digest. >>>>>I've seen a couple of posts here, but they were never answered: >>>>>http://mail.iptel.org/pipermail/serusers/2005-March/017342.html >>>>>http://mail.iptel.org/pipermail/serusers/2005-March/017075.html >>>>> >>>>>----- >>>>>I have a small test in my ser.cfg file: >>>>> if (!radius_www_authorize("")) { >>>>> xlog("L_I","%ci - %fu - User not authenticated, Radius >>>>>Authenticating...\n"); >>>>> www_challenge("","0"); >>>>> break; >>>>> } else { >>>>> xlog("L_I","%ci - %fu - User authenticated...\n"); >>>>> }; >>>>> >>>>> if (radius_is_user_in("From", "Dialin")){ >>>>> xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); >>>>> } else { >>>>> xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); >>>>> }; >>>>> >>>>> if (radius_is_user_in("Credentials", "Dialin2")){ >>>>> xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); >>>>> } else { >>>>> xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); >>>>> }; >>>>> >>>>>----- >>>>>In /etc/raddb/users file I have the following at line 152: >>>>>DEFAULT Auth-Type = System >>>>> Fall-Through = 1 >>>>> >>>>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>>>> >>>>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>>>> >>>>>----- >>>>> >>>>>These are mysql tables: >>>>> >>>>>+----+----------+-----------+----+----------+ >>>>>| id | UserName | Attribute | op | Value | >>>>>+----+----------+-----------+----+----------+ >>>>>| 1 | Jhassell | Password | == | changeme | >>>>>| 2 | Rneis | Password | == | changeme | >>>>>| 3 | 1000 | Password | == | 1000 | >>>>>| 4 | 2000 | Password | == | 2000 | >>>>>| 5 | 3000 | Password | == | 3000 | >>>>>| 8 | 1000 | Auth-Type | := | Digest | >>>>>+----+----------+-----------+----+----------+ >>>>> >>>>>+----+-----------+-----------+----+--------+ >>>>>| id | GroupName | Attribute | op | Value | >>>>>+----+-----------+-----------+----+--------+ >>>>>| 6 | Dialin | Auth-Type | := | Accept | >>>>>+----+-----------+-----------+----+--------+ >>>>> >>>>>+----+-----------+---------------+----+--------------------------------- >>>>> >>>>> >- > > >>>>> >>>>> >>>>> >>>>> >>+ >> >> >> >> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>- >>> >>> >>> >>> >>> >>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>- >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>>----+ >>>>>| id | GroupName | Attribute | op | Value >>>>> >>>>> >>>>> >>>>> >>| >> >> >> >> >>>>>prio | >>>>>+----+-----------+---------------+----+--------------------------------- >>>>> >>>>> >- > > >>>>> >>>>> >>>>> >>>>> >>+ >> >> >> >> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>- >>> >>> >>> >>> >>> >>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>- >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>>----+ >>>>>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" >>>>> >>>>> >>>>> >>>>> >>| >> >> >> >> >>>>>0 | >>>>>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" >>>>> >>>>> >>>>> >>>>> >>| >> >> >> >> >>>>>0 | >>>>>+----+-----------+---------------+----+--------------------------------- >>>>> >>>>> >- > > >>>>> >>>>> >>>>> >>>>> >>+ >> >> >> >> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>- >>> >>> >>> >>> >>> >>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>- >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>>----+ >>>>> >>>>>+----+----------+---------------+----+------------------+ >>>>>| id | UserName | Attribute | op | Value | >>>>>+----+----------+---------------+----+------------------+ >>>>>| 1 | 1000 | Reply-Message | = | "Authenticated" | >>>>>| 2 | 1000 | Sip-Group | = | Dialin | >>>>>| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >>>>>+----+----------+---------------+----+------------------+ >>>>> >>>>>+----+----------+------------+ >>>>>| id | UserName | GroupName | >>>>>+----+----------+------------+ >>>>>| 1 | Jhassell | Dialin | >>>>>| 2 | Rneis | Staticdial | >>>>>| 3 | 1000 | Dialin | >>>>>| 4 | 2000 | Dialin | >>>>>| 5 | 3000 | Dialin | >>>>>| 6 | 3000 | Dialin2 | >>>>>+----+----------+------------+ >>>>> >>>>>------ >>>>> >>>>>This is the debug I get from freeradius for the group check: >>>>> >>>>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >>>>>length=67 >>>>> User-Name = "1000(a)xx.xx.xx.xx" >>>>> Sip-Group = "Dialin2" >>>>> Service-Type = Group-Check >>>>> NAS-IP-Address = 127.0.0.1 >>>>> NAS-Port = 0 >>>>>Processing the authorize section of radiusd.conf >>>>>modcall: entering group authorize for request 74 >>>>>modcall[authorize]: module "preprocess" returns ok for request 74 >>>>>modcall[authorize]: module "chap" returns noop for request 74 >>>>>modcall[authorize]: module "mschap" returns noop for request 74 >>>>>modcall[authorize]: module "digest" returns noop for request 74 >>>>>rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>>>"1000(a)xx.xx.xx.xx" >>>>>rlm_realm: Found realm "xx.xx.xx.xx" >>>>>rlm_realm: Adding Stripped-User-Name = "1000" >>>>>rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>>>>rlm_realm: Adding Realm = "xx.xx.xx.xx" >>>>>rlm_realm: Authentication realm is LOCAL. >>>>>modcall[authorize]: module "suffix" returns noop for request 74 >>>>>rlm_eap: No EAP-Message, not doing EAP >>>>>modcall[authorize]: module "eap" returns noop for request 74 >>>>>users: Matched entry DEFAULT at line 152 >>>>>users: Matched entry DEFAULT at line 158 >>>>>modcall[authorize]: module "files" returns ok for request 74 >>>>>radius_xlat: '1000' >>>>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>>>rlm_sql (sql): Released sql socket id: 0 >>>>>modcall[authorize]: module "sql" returns ok for request 74 >>>>>modcall: group authorize returns ok for request 74 >>>>>rad_check_password: Found Auth-Type Digest >>>>>auth: type "digest" >>>>>Processing the authenticate section of radiusd.conf >>>>>modcall: entering group authenticate for request 74 >>>>>ERROR: No Digest-Nonce: Cannot perform Digest authentication >>>>>modcall[authenticate]: module "digest" returns invalid for request 74 >>>>>modcall: group authenticate returns invalid for request 74 >>>>>auth: Failed to validate the user. >>>>>Delaying request 74 for 1 seconds >>>>>Finished request 74 >>>>>Going to the next request >>>>>--- Walking the entire request list --- >>>>>Waking up in 1 seconds... >>>>>--- Walking the entire request list --- >>>>>Waking up in 1 seconds... >>>>>--- Walking the entire request list --- >>>>>Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 >>>>> Reply-Message = "Authenticated" >>>>>Waking up in 4 seconds... >>>>>--- Walking the entire request list --- >>>>>Cleaning up request 74 ID 15 with timestamp 434f1121 >>>>>Nothing to do. Sleeping until we see a request. >>>>> >>>>> >>>>> >>>>> >>>>> >>>>>Any help in this matter would be deeply appreciated, >>>>> >>>>> >>>>> >>>>> >>>>>Lenir >>>>> >>>>> >>>>> >>>>> >>>>>_______________________________________________ >>>>>Serdev mailing list >>>>>Serdev(a)iptel.org >>>>>http://mail.iptel.org/mailman/listinfo/serdev >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>_______________________________________________ >>>>Serusers mailing list >>>>Serusers(a)iptel.org >>>>http://mail.iptel.org/mailman/listinfo/serusers >>>> >>>> >>>>_______________________________________________ >>>>Serdev mailing list >>>>Serdev(a)iptel.org >>>>http://mail.iptel.org/mailman/listinfo/serdev >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> > > > > > >

1 0

[Users] Re: group_radius radius_is_user_in
by Tavis P 19 Oct '05

19 Oct '05

I've never used the group_radius module so i'm not certain what it expects from the radius server (its not well documented currently) Although you may be able to optimize a bit and skip the radius_is_user_in function call and simply pass the users group back as an SIP-AVP attribute in the radreply table, and then check for that AVP in the OpenSER script What i've done is commented the group checking SQL from the freeradius sql.conf file so that when a user authenticates or when an avp_radius call is made only 2 SQL queries are sent, instead of the 4-5 used when group check is enabled. Try this, it should work and it will save you ~10 sql queries and a radius request/response Lenir wrote: >I'm trying to use group_radius module to check if the user is in a >particular radius group. I'm calling radius_is_user_in function to do this. >Here is the snippet in my config that calls that function: > >route[2] { > > # ----------------------------------------------------------------- > # REGISTER Message Handler > # ---------------------------------------------------------------- > sl_send_reply("100", "Trying"); > > if (!radius_www_authorize("")) { > xlog("L_INFO","$ci - $fu - User not authenticated, Radius >Authenticating...\n"); > www_challenge("","0"); > return; > } else { > xlog("L_INFO","$ci - $fu - User authenticated...\n"); > }; > > if (radius_is_user_in("From", "Dialin")){ > xlog("L_INFO","From: User is in Radius Group Dialin!!!!\n"); > } else { > xlog("L_INFO","From: User *IS NOT* Group Dialin!!!!!\n"); > }; > > if (radius_is_user_in("From", "Dialin2")){ > xlog("L_INFO","From: User is in Radius Group >Dialin2!!!!\n"); > } else { > xlog("L_INFO","From: User *IS NOT* Group Dialin2!!!!!\n"); > }; > > #if (!radius_check_to()) { > # sl_send_reply("401", "Unauthorized"); > # return; > #}; > > consume_credentials(); > > if (!save("location")) { > sl_reply_error(); > }; >} > > >-----Original Message----- >From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >Sent: Wednesday, October 19, 2005 3:59 PM >To: Lenir >Cc: users(a)openser.org; serusers(a)iptel.org >Subject: Re: group_radius radius_is_user_in > >Well either way the radius server is going to respond with an >"Access-Accept" because you have set the auth-type to "none" (which is >necessary because you are not authenticating and can not provide the >necessary credentials). > >>From the trace you showed me below, i see two radius requests both for >the user 1000 and both of which respond as i would expect. > >I'm not what you are trying to accomplish, are you using the >group_radius module or just loading the group information using avp_radius? > > >Lenir wrote: > > > >>This is my users file: >> >>DEFAULT Auth-Type = System >> Fall-Through = 1 >> >>DEFAULT Service-Type == Call-Check, Auth-Type := None >> >>DEFAULT Service-Type == Group-Check, Auth-Type := None >> >>DEFAULT Service-Type == SIP-Session, Auth-Type := Digest >> >>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >> >>DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None >> >> >>mysql> select * from radcheck; >>+----+----------+-----------+----+----------+ >>| id | UserName | Attribute | op | Value | >>+----+----------+-----------+----+----------+ >>| 1 | Jhassell | Password | == | changeme | >>| 2 | Rneis | Password | == | changeme | >>| 3 | 1000 | Password | == | 1000 | >>| 4 | 2000 | Password | == | 2000 | >>| 5 | 3000 | Password | == | 3000 | >>+----+----------+-----------+----+----------+ >>5 rows in set (0.00 sec) >> >>mysql> select * from radreply; >>Empty set (0.00 sec) >> >>mysql> select * from usergroup; >>+----+----------+------------+ >>| id | UserName | GroupName | >>+----+----------+------------+ >>| 1 | Jhassell | Dialin | >>| 2 | Rneis | Staticdial | >>| 3 | 1000 | Dialin | >>| 4 | 2000 | Dialin | >>| 5 | 3000 | Dialin | >>| 6 | 3000 | Dialin2 | >>+----+----------+------------+ >>6 rows in set (0.00 sec) >> >>mysql> select * from radgroupcheck; >>Empty set (0.00 sec) >> >>mysql> select * from radgroupreply; >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>---+ >>| id | GroupName | Attribute | op | Value | >>prio | >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>----+ >>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >>0 | >>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >>0 | >>| 3 | Dialin | SIP-AVP | = | Sip-Group:Dialin | >>0 | >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>----+ >>3 rows in set (0.00 sec) >> >>mysql> select * from radpostauth; >>Empty set (0.00 sec) >> >> >> >>Here's the debug, notice how it returns access-accept whether its in the >>right group or not. Shouldn't it return access-reject for group Dialin2? >>----------------- >>rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=152, >>length=66 >> User-Name = "1000(a)xx.xx.xx.xx" >> Sip-Group = "Dialin" >> Service-Type = Group-Check >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 0 >> Processing the authorize section of radiusd.conf >>modcall: entering group authorize for request 4 >> modcall[authorize]: module "preprocess" returns ok for request 4 >> modcall[authorize]: module "chap" returns noop for request 4 >> modcall[authorize]: module "mschap" returns noop for request 4 >> modcall[authorize]: module "digest" returns noop for request 4 >> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>"1000(a)xx.xx.xx.xx" >> rlm_realm: Found realm "xx.xx.xx.xx" >> rlm_realm: Adding Stripped-User-Name = "1000" >> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >> rlm_realm: Adding Realm = "xx.xx.xx.xx" >> rlm_realm: Authentication realm is LOCAL. >> modcall[authorize]: module "suffix" returns noop for request 4 >> rlm_eap: No EAP-Message, not doing EAP >> modcall[authorize]: module "eap" returns noop for request 4 >> users: Matched entry DEFAULT at line 156 >> users: Matched entry DEFAULT at line 161 >> modcall[authorize]: module "files" returns ok for request 4 >>radius_xlat: '1000' >>rlm_sql (sql): sql_set_user escaped user --> '1000' >>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>radcheck WHERE Username = '1000' ORDER BY id' >>rlm_sql (sql): Reserving sql socket id: 0 >>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >> >> >>FROM radcheck WHERE Username = '1000' ORDER BY id > > >>radius_xlat: 'SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>rlm_sql_mysql: query: SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>radreply WHERE Username = '1000' ORDER BY id' >>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >> >> >>FROM radreply WHERE Username = '1000' ORDER BY id > > >>radius_xlat: 'SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id' >>rlm_sql_mysql: query: SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id >>rlm_sql (sql): Checking profile DEFAULT >>rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >>radius_xlat: 'SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>rlm_sql_mysql: query: SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>radius_xlat: 'SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id' >>rlm_sql_mysql: query: SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id >>rlm_sql (sql): Released sql socket id: 0 >> modcall[authorize]: module "sql" returns ok for request 4 >>modcall: group authorize returns ok for request 4 >> rad_check_password: Found Auth-Type None >> rad_check_password: Auth-Type = Accept, accepting the user >>radius_xlat: 'Authenticated by group Dialin' >>Sending Access-Accept of id 152 to xx.xx.xx.xx:33167 >> Reply-Message = "Authenticated by group Dialin" >> SIP-AVP = "Sip-Group:Dialin" >>Finished request 4 >>Going to the next request >>Waking up in 6 seconds... >>rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=153, >>length=67 >> User-Name = "1000(a)xx.xx.xx.xx" >> Sip-Group = "Dialin2" >> Service-Type = Group-Check >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 0 >> Processing the authorize section of radiusd.conf >>modcall: entering group authorize for request 5 >> modcall[authorize]: module "preprocess" returns ok for request 5 >> modcall[authorize]: module "chap" returns noop for request 5 >> modcall[authorize]: module "mschap" returns noop for request 5 >> modcall[authorize]: module "digest" returns noop for request 5 >> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>"1000(a)xx.xx.xx.xx" >> rlm_realm: Found realm "xx.xx.xx.xx" >> rlm_realm: Adding Stripped-User-Name = "1000" >> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >> rlm_realm: Adding Realm = "xx.xx.xx.xx" >> rlm_realm: Authentication realm is LOCAL. >> modcall[authorize]: module "suffix" returns noop for request 5 >> rlm_eap: No EAP-Message, not doing EAP >> modcall[authorize]: module "eap" returns noop for request 5 >> users: Matched entry DEFAULT at line 156 >> users: Matched entry DEFAULT at line 161 >> modcall[authorize]: module "files" returns ok for request 5 >>radius_xlat: '1000' >>rlm_sql (sql): sql_set_user escaped user --> '1000' >>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>radcheck WHERE Username = '1000' ORDER BY id' >>rlm_sql (sql): Reserving sql socket id: 4 >>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >> >> >>FROM radcheck WHERE Username = '1000' ORDER BY id > > >>radius_xlat: 'SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>rlm_sql_mysql: query: SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >>radreply WHERE Username = '1000' ORDER BY id' >>rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >> >> >>FROM radreply WHERE Username = '1000' ORDER BY id > > >>radius_xlat: 'SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id' >>rlm_sql_mysql: query: SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = '1000' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id >>rlm_sql (sql): Checking profile DEFAULT >>rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >>radius_xlat: 'SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id' >>rlm_sql_mysql: query: SELECT >>radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupch >> >> >e > > >>ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupcheck.GroupName ORDER BY radgroupcheck.id >>radius_xlat: 'SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id' >>rlm_sql_mysql: query: SELECT >>radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupre >> >> >p > > >>ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >>usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >>radgroupreply.GroupName ORDER BY radgroupreply.id >>rlm_sql (sql): Released sql socket id: 4 >> modcall[authorize]: module "sql" returns ok for request 5 >>modcall: group authorize returns ok for request 5 >> rad_check_password: Found Auth-Type None >> rad_check_password: Auth-Type = Accept, accepting the user >>radius_xlat: 'Authenticated by group Dialin' >>Sending Access-Accept of id 153 to xx.xx.xx.xx:33167 >> Reply-Message = "Authenticated by group Dialin" >> SIP-AVP = "Sip-Group:Dialin" >>Finished request 5 >> >>-----Original Message----- >>From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >>Sent: Friday, October 14, 2005 7:21 PM >>To: Lenir >>Cc: users(a)openser.org; serusers(a)iptel.org >>Subject: Re: group_radius radius_is_user_in >> >>Ugh the subject line is getting really munged up ;P >> >>Hmmm, what does the output from "radiusd -X" look like for the exchange? >> >> >>Lenir wrote: >> >> >> >> >> >>>Tavis, >>> >>>Thanks for your input, that did fix the problem. I did have the "files" >>>before "sql" in radiusd.conf. Also I followed your advice about taking out >>>"Auth-Type" out of mysql table and let DEFAULT in users file do the trick. >>> >>> > > > >>>However it's semi-working. >>> >>>Accourding to the snippet from my ser.cfg file, now I get the following in >>>stderr: >>>0(4866) 000d2890-d47f0003-4a230347-53c6189b(a)yy.yy.yy.yy - >>>sip:1000@xx.xx.xx.xx - User authenticated... >>>0(4866) Credentials: User is in Radius Group Dialin!!!! >>>0(4866) Credentials: User is in Radius Group Dialin2!!!! >>> >>>No matter which parameter I use for the function radius_is_user_in(), it >>>always returns TRUE. When in fact it should return FALSE for Group >>> >>> >Dialin2. > > >>>I've tried: >>> >>>if (radius_is_user_in("From", "Dialin2")){... >>>if (radius_is_user_in("Credentials", "Dialin2")){... >>> >>> >>> >>> >>> >>>Here's what I did to fix future problems: >>> >>>EFAULT Auth-Type = System >>> Fall-Through = 1 >>> >>>DEFAULT Service-Type == Call-Check, Auth-Type := Digest >>> >>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Session, Auth-Type := Digest >>> >>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None >>> >>> >>>Also, for those of you using the latest version of freeradius, you may >>> >>> >have > > >>>to comment out the following lines as they conflict with dictionary.ser >>> >>> >>> >>> >>(SER >> >> >> >> >>>CVS) and dictionary.sip (comes with radiusclient-NG) >>> >>>#VALUE Service-Type Voice 12 >>>#VALUE Service-Type Fax 13 >>>#VALUE Service-Type Modem-Relay 14 >>>#VALUE Service-Type IAPP-Register 15 >>>#VALUE Service-Type IAPP-AP-Check 16 >>> >>> >>>Thanks, >>> >>> >>>Lenir >>> >>> >>>-----Original Message----- >>>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On >>>Behalf Of Tavis P >>>Sent: Friday, October 14, 2005 1:49 PM >>>To: lsantiago(a)globalgatewaycom.com >>>Cc: serdev(a)iptel.org; serusers(a)iptel.org; devel(a)openser.org; >>>users(a)openser.org >>>Subject: [Serusers] Re: [Serdev] group_radius radius_is_user_in >>> >>>Oops, i spoke too soon >>> >>>It looks like you have placed the "files" module before the "sql" module >>>in your radiusd.conf >>> >>>Its matching your DEFAULT entry in files (setting the Auth-Type to none) >>>but the sql module is later changing the Auth-Type to "digest" >>> >>>Changing the order would solve this problem, as you want it to match the >>>SQL statement first and than the section in the files last (which >>>changes the Auth-Type) >>> >>>Also, you may want to reduce the load on your database by not setting >>>the Auth-Type in the database and instead setting in the users file with >>>a DEFAULT statement as (at least in my case) it isn't somthing that need >>>to be dynamic. >>> >>>lenirsantiago(a)yahoo.com wrote: >>> >>> >>> >>> >>> >>> >>> >>>>Hello list, >>>> >>>>I've been trying my hardest today to get group_radius to work, and its >>>>function radius_is_user_in(). >>>>I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and >>>> >>>> >>>> >>>> >>digest >> >> >> >> >>>>authentication. >>>> >>>>Radius authentication works fine. >>>>The problem is that when radius_is_user_in() function gets called, it >>>> >>>> >>>> >>>> >>sends >> >> >> >> >>>>a radius message but without the User-Password field and freeradius >>>>complains that it requires it since we are using Digest. >>>>I've seen a couple of posts here, but they were never answered: >>>>http://mail.iptel.org/pipermail/serusers/2005-March/017342.html >>>>http://mail.iptel.org/pipermail/serusers/2005-March/017075.html >>>> >>>>----- >>>>I have a small test in my ser.cfg file: >>>> if (!radius_www_authorize("")) { >>>> xlog("L_I","%ci - %fu - User not authenticated, Radius >>>>Authenticating...\n"); >>>> www_challenge("","0"); >>>> break; >>>> } else { >>>> xlog("L_I","%ci - %fu - User authenticated...\n"); >>>> }; >>>> >>>> if (radius_is_user_in("From", "Dialin")){ >>>> xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); >>>> } else { >>>> xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); >>>> }; >>>> >>>> if (radius_is_user_in("Credentials", "Dialin2")){ >>>> xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); >>>> } else { >>>> xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); >>>> }; >>>> >>>>----- >>>>In /etc/raddb/users file I have the following at line 152: >>>>DEFAULT Auth-Type = System >>>> Fall-Through = 1 >>>> >>>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>>> >>>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>>> >>>>----- >>>> >>>>These are mysql tables: >>>> >>>>+----+----------+-----------+----+----------+ >>>>| id | UserName | Attribute | op | Value | >>>>+----+----------+-----------+----+----------+ >>>>| 1 | Jhassell | Password | == | changeme | >>>>| 2 | Rneis | Password | == | changeme | >>>>| 3 | 1000 | Password | == | 1000 | >>>>| 4 | 2000 | Password | == | 2000 | >>>>| 5 | 3000 | Password | == | 3000 | >>>>| 8 | 1000 | Auth-Type | := | Digest | >>>>+----+----------+-----------+----+----------+ >>>> >>>>+----+-----------+-----------+----+--------+ >>>>| id | GroupName | Attribute | op | Value | >>>>+----+-----------+-----------+----+--------+ >>>>| 6 | Dialin | Auth-Type | := | Accept | >>>>+----+-----------+-----------+----+--------+ >>>> >>>>+----+-----------+---------------+----+---------------------------------- >>>> >>>> >+ > > >>>> >>>> >>>> >>>> >>- >> >> >> >> >>>> >>>> >>>> >>>> >>>> >>>> >>>- >>> >>> >>> >>> >>> >>> >>>>----+ >>>>| id | GroupName | Attribute | op | Value >>>> >>>> >| > > >>>>prio | >>>>+----+-----------+---------------+----+---------------------------------- >>>> >>>> >+ > > >>>> >>>> >>>> >>>> >>- >> >> >> >> >>>> >>>> >>>> >>>> >>>> >>>> >>>- >>> >>> >>> >>> >>> >>> >>>>----+ >>>>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" >>>> >>>> >| > > >>>>0 | >>>>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" >>>> >>>> >| > > >>>>0 | >>>>+----+-----------+---------------+----+---------------------------------- >>>> >>>> >+ > > >>>> >>>> >>>> >>>> >>- >> >> >> >> >>>> >>>> >>>> >>>> >>>> >>>> >>>- >>> >>> >>> >>> >>> >>> >>>>----+ >>>> >>>>+----+----------+---------------+----+------------------+ >>>>| id | UserName | Attribute | op | Value | >>>>+----+----------+---------------+----+------------------+ >>>>| 1 | 1000 | Reply-Message | = | "Authenticated" | >>>>| 2 | 1000 | Sip-Group | = | Dialin | >>>>| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >>>>+----+----------+---------------+----+------------------+ >>>> >>>>+----+----------+------------+ >>>>| id | UserName | GroupName | >>>>+----+----------+------------+ >>>>| 1 | Jhassell | Dialin | >>>>| 2 | Rneis | Staticdial | >>>>| 3 | 1000 | Dialin | >>>>| 4 | 2000 | Dialin | >>>>| 5 | 3000 | Dialin | >>>>| 6 | 3000 | Dialin2 | >>>>+----+----------+------------+ >>>> >>>>------ >>>> >>>>This is the debug I get from freeradius for the group check: >>>> >>>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >>>>length=67 >>>> User-Name = "1000(a)xx.xx.xx.xx" >>>> Sip-Group = "Dialin2" >>>> Service-Type = Group-Check >>>> NAS-IP-Address = 127.0.0.1 >>>> NAS-Port = 0 >>>>Processing the authorize section of radiusd.conf >>>>modcall: entering group authorize for request 74 >>>>modcall[authorize]: module "preprocess" returns ok for request 74 >>>>modcall[authorize]: module "chap" returns noop for request 74 >>>>modcall[authorize]: module "mschap" returns noop for request 74 >>>>modcall[authorize]: module "digest" returns noop for request 74 >>>> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>>"1000(a)xx.xx.xx.xx" >>>> rlm_realm: Found realm "xx.xx.xx.xx" >>>> rlm_realm: Adding Stripped-User-Name = "1000" >>>> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>>> rlm_realm: Adding Realm = "xx.xx.xx.xx" >>>> rlm_realm: Authentication realm is LOCAL. >>>>modcall[authorize]: module "suffix" returns noop for request 74 >>>>rlm_eap: No EAP-Message, not doing EAP >>>>modcall[authorize]: module "eap" returns noop for request 74 >>>> users: Matched entry DEFAULT at line 152 >>>> users: Matched entry DEFAULT at line 158 >>>>modcall[authorize]: module "files" returns ok for request 74 >>>>radius_xlat: '1000' >>>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>>rlm_sql (sql): Released sql socket id: 0 >>>>modcall[authorize]: module "sql" returns ok for request 74 >>>>modcall: group authorize returns ok for request 74 >>>>rad_check_password: Found Auth-Type Digest >>>>auth: type "digest" >>>>Processing the authenticate section of radiusd.conf >>>>modcall: entering group authenticate for request 74 >>>>ERROR: No Digest-Nonce: Cannot perform Digest authentication >>>>modcall[authenticate]: module "digest" returns invalid for request 74 >>>>modcall: group authenticate returns invalid for request 74 >>>>auth: Failed to validate the user. >>>>Delaying request 74 for 1 seconds >>>>Finished request 74 >>>>Going to the next request >>>>--- Walking the entire request list --- >>>>Waking up in 1 seconds... >>>>--- Walking the entire request list --- >>>>Waking up in 1 seconds... >>>>--- Walking the entire request list --- >>>>Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 >>>> Reply-Message = "Authenticated" >>>>Waking up in 4 seconds... >>>>--- Walking the entire request list --- >>>>Cleaning up request 74 ID 15 with timestamp 434f1121 >>>>Nothing to do. Sleeping until we see a request. >>>> >>>> >>>> >>>> >>>> >>>>Any help in this matter would be deeply appreciated, >>>> >>>> >>>> >>>> >>>>Lenir >>>> >>>> >>>> >>>> >>>>_______________________________________________ >>>>Serdev mailing list >>>>Serdev(a)iptel.org >>>>http://mail.iptel.org/mailman/listinfo/serdev >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>_______________________________________________ >>>Serusers mailing list >>>Serusers(a)iptel.org >>>http://mail.iptel.org/mailman/listinfo/serusers >>> >>> >>>_______________________________________________ >>>Serdev mailing list >>>Serdev(a)iptel.org >>>http://mail.iptel.org/mailman/listinfo/serdev >>> >>> >>> >>> >>> >>> >>> >>> >> >> >> >> >> >> > > > > > >

2 2

[Serusers] RTP proxy between two subnetworks with private @s
by Jose Soler 19 Oct '05

19 Oct '05

Hi, I am trying to figure out how to solve the follwoing problem. I have two subnetworks, A and B, with different private ip adressing schemes (IP@A <mailto:IP@A> ) and (IP@B <mailto:IP@B> ). SER is installed in a computer with network interfaces towards both subnetworks. SER's SIP signalling proxying operation works properly within the subnetworks and when trying to set up a communication between users in A and B. But in that last case, obviously there is no media at all circulating among the subnetworks. Portaone's RTP proxy has been installed and configured in the computer with interfaces towards both subnetworks where SER is installed. I am trying to configure SER so that, based on the nathelper module, when communication between both subnetworks occurs, the RTP proxy is involved and the communication (also media and not only signalling) is possible. BUT I am making something wrong, becouse it does not work ... Can anyone give me a hand /hint? Thanks a lot in advance / in any case. My SER config file is the following: # # ----------- global configuration parameters ------------------------ /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) fifo="/tmp/ser_fifo" fifo_mode=0662 alias=wirelessip.x.x.x alias=sip..x.x.x alias=x.x.x log_stderror=no debug=3 children=3 mhomed=1 # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/lib/ser/modules/mysql.so" loadmodule "/lib/ser/modules/sl.so" loadmodule "/lib/ser/modules/tm.so" loadmodule "/lib/ser/modules/rr.so" loadmodule "/lib/ser/modules/maxfwd.so" loadmodule "/lib/ser/modules/usrloc.so" loadmodule "/lib/ser/modules/textops.so" loadmodule "/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/lib/ser/modules/auth.so" loadmodule "/lib/ser/modules/auth_db.so" # For NAT support / media proxying loadmodule "/lib/ser/modules/nathelper.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module modparam("auth_db", "calculate_ha1", yes) # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # For NAT # We will use flag 6 to mark NATed contacts modparam("registrar", "nat_flag", 6) # Enable NAT pinging modparam("nathelper", "natping_interval", 60) # Ping only contacts that are known to be # behind NAT modparam("nathelper", "ping_nated_only", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # special handling for NATed clients; first, nat test is # executed: it looks for via!=received and RFC1918 addresses # in Contact (may fail if line-folding used); also, # the received test should, if complete, should check all # vias for presence of received if (nat_uac_test("3")) { # allow RR-ed requests, as these may indicate that # a NAT-enabled proxy takes care of it; unless it is # a REGISTER if (method == "REGISTER" || ! search("^Record-Route:")) { log("LOG: Someone trying to register from private IP, rewriting\n"); # This will work only for user agents that support symmetric # communication. We tested quite many of them and majority is # smart smart enough to be symmetric. In some phones, like # it takes a configuration option. With Cisco 7960, it is # called NAT_Enable=Yes, with kphone it is called # "symmetric media" and "symmetric signaling". (The latter # not part of public released yet.) fix_nated_contact(); # Rewrite contact with source IP of signalling if (method == "INVITE") { fix_nated_sdp("1"); # Add direction=active to SDP }; force_rport(); # Add rport parameter to topmost Via setflag(6); # Mark as NATed }; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; lookup("aliases"); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("com.dtu.dk", "subscriber")) { www_challenge("com.dtu.dk", "0"); break; }; save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; } # # Forcing media relay if necessary # route[1] { #if (uri=~"[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")){ # sl_send_reply("479", "We don't forward to private IP addresses"); # break; #}; #if (isflagset(6)) { force_rtp_proxy(); # I force everything through the proxy t_on_reply("1"); append_hf("P-Behind-NAT: Yes\r\n"); #}; if (!t_relay()) { sl_reply_error(); break; }; } onreply_route[1] { if (status =~ "(183)|2[0-9][0-9]") { fix_nated_contact(); force_rtp_proxy(); }; }

4 5

[Users] Re: group_radius radius_is_user_in
by Tavis P 19 Oct '05

19 Oct '05

Well either way the radius server is going to respond with an "Access-Accept" because you have set the auth-type to "none" (which is necessary because you are not authenticating and can not provide the necessary credentials). >From the trace you showed me below, i see two radius requests both for the user 1000 and both of which respond as i would expect. I'm not what you are trying to accomplish, are you using the group_radius module or just loading the group information using avp_radius? Lenir wrote: >This is my users file: > >DEFAULT Auth-Type = System > Fall-Through = 1 > >DEFAULT Service-Type == Call-Check, Auth-Type := None > >DEFAULT Service-Type == Group-Check, Auth-Type := None > >DEFAULT Service-Type == SIP-Session, Auth-Type := Digest > >DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None > >DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None > > >mysql> select * from radcheck; >+----+----------+-----------+----+----------+ >| id | UserName | Attribute | op | Value | >+----+----------+-----------+----+----------+ >| 1 | Jhassell | Password | == | changeme | >| 2 | Rneis | Password | == | changeme | >| 3 | 1000 | Password | == | 1000 | >| 4 | 2000 | Password | == | 2000 | >| 5 | 3000 | Password | == | 3000 | >+----+----------+-----------+----+----------+ >5 rows in set (0.00 sec) > >mysql> select * from radreply; >Empty set (0.00 sec) > >mysql> select * from usergroup; >+----+----------+------------+ >| id | UserName | GroupName | >+----+----------+------------+ >| 1 | Jhassell | Dialin | >| 2 | Rneis | Staticdial | >| 3 | 1000 | Dialin | >| 4 | 2000 | Dialin | >| 5 | 3000 | Dialin | >| 6 | 3000 | Dialin2 | >+----+----------+------------+ >6 rows in set (0.00 sec) > >mysql> select * from radgroupcheck; >Empty set (0.00 sec) > >mysql> select * from radgroupreply; >+----+-----------+---------------+----+----------------------------------+-- >---+ >| id | GroupName | Attribute | op | Value | >prio | >+----+-----------+---------------+----+----------------------------------+-- >----+ >| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >0 | >| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >0 | >| 3 | Dialin | SIP-AVP | = | Sip-Group:Dialin | >0 | >+----+-----------+---------------+----+----------------------------------+-- >----+ >3 rows in set (0.00 sec) > >mysql> select * from radpostauth; >Empty set (0.00 sec) > > > >Here's the debug, notice how it returns access-accept whether its in the >right group or not. Shouldn't it return access-reject for group Dialin2? >----------------- >rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=152, >length=66 > User-Name = "1000(a)xx.xx.xx.xx" > Sip-Group = "Dialin" > Service-Type = Group-Check > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 4 > modcall[authorize]: module "preprocess" returns ok for request 4 > modcall[authorize]: module "chap" returns noop for request 4 > modcall[authorize]: module "mschap" returns noop for request 4 > modcall[authorize]: module "digest" returns noop for request 4 > rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >"1000(a)xx.xx.xx.xx" > rlm_realm: Found realm "xx.xx.xx.xx" > rlm_realm: Adding Stripped-User-Name = "1000" > rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx > rlm_realm: Adding Realm = "xx.xx.xx.xx" > rlm_realm: Authentication realm is LOCAL. > modcall[authorize]: module "suffix" returns noop for request 4 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 4 > users: Matched entry DEFAULT at line 156 > users: Matched entry DEFAULT at line 161 > modcall[authorize]: module "files" returns ok for request 4 >radius_xlat: '1000' >rlm_sql (sql): sql_set_user escaped user --> '1000' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = '1000' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 0 >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radcheck WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = '1000' ORDER BY id' >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radreply WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Checking profile DEFAULT >rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Released sql socket id: 0 > modcall[authorize]: module "sql" returns ok for request 4 >modcall: group authorize returns ok for request 4 > rad_check_password: Found Auth-Type None > rad_check_password: Auth-Type = Accept, accepting the user >radius_xlat: 'Authenticated by group Dialin' >Sending Access-Accept of id 152 to xx.xx.xx.xx:33167 > Reply-Message = "Authenticated by group Dialin" > SIP-AVP = "Sip-Group:Dialin" >Finished request 4 >Going to the next request >Waking up in 6 seconds... >rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=153, >length=67 > User-Name = "1000(a)xx.xx.xx.xx" > Sip-Group = "Dialin2" > Service-Type = Group-Check > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 5 > modcall[authorize]: module "preprocess" returns ok for request 5 > modcall[authorize]: module "chap" returns noop for request 5 > modcall[authorize]: module "mschap" returns noop for request 5 > modcall[authorize]: module "digest" returns noop for request 5 > rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >"1000(a)xx.xx.xx.xx" > rlm_realm: Found realm "xx.xx.xx.xx" > rlm_realm: Adding Stripped-User-Name = "1000" > rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx > rlm_realm: Adding Realm = "xx.xx.xx.xx" > rlm_realm: Authentication realm is LOCAL. > modcall[authorize]: module "suffix" returns noop for request 5 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 5 > users: Matched entry DEFAULT at line 156 > users: Matched entry DEFAULT at line 161 > modcall[authorize]: module "files" returns ok for request 5 >radius_xlat: '1000' >rlm_sql (sql): sql_set_user escaped user --> '1000' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = '1000' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 4 >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radcheck WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = '1000' ORDER BY id' >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radreply WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Checking profile DEFAULT >rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Released sql socket id: 4 > modcall[authorize]: module "sql" returns ok for request 5 >modcall: group authorize returns ok for request 5 > rad_check_password: Found Auth-Type None > rad_check_password: Auth-Type = Accept, accepting the user >radius_xlat: 'Authenticated by group Dialin' >Sending Access-Accept of id 153 to xx.xx.xx.xx:33167 > Reply-Message = "Authenticated by group Dialin" > SIP-AVP = "Sip-Group:Dialin" >Finished request 5 > >-----Original Message----- >From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >Sent: Friday, October 14, 2005 7:21 PM >To: Lenir >Cc: users(a)openser.org; serusers(a)iptel.org >Subject: Re: group_radius radius_is_user_in > >Ugh the subject line is getting really munged up ;P > >Hmmm, what does the output from "radiusd -X" look like for the exchange? > > >Lenir wrote: > > > >>Tavis, >> >>Thanks for your input, that did fix the problem. I did have the "files" >>before "sql" in radiusd.conf. Also I followed your advice about taking out >>"Auth-Type" out of mysql table and let DEFAULT in users file do the trick. >> >>However it's semi-working. >> >>Accourding to the snippet from my ser.cfg file, now I get the following in >>stderr: >>0(4866) 000d2890-d47f0003-4a230347-53c6189b(a)yy.yy.yy.yy - >>sip:1000@xx.xx.xx.xx - User authenticated... >>0(4866) Credentials: User is in Radius Group Dialin!!!! >>0(4866) Credentials: User is in Radius Group Dialin2!!!! >> >>No matter which parameter I use for the function radius_is_user_in(), it >>always returns TRUE. When in fact it should return FALSE for Group Dialin2. >>I've tried: >> >>if (radius_is_user_in("From", "Dialin2")){... >>if (radius_is_user_in("Credentials", "Dialin2")){... >> >> >> >> >> >>Here's what I did to fix future problems: >> >>EFAULT Auth-Type = System >> Fall-Through = 1 >> >>DEFAULT Service-Type == Call-Check, Auth-Type := Digest >> >>DEFAULT Service-Type == Group-Check, Auth-Type := None >> >>DEFAULT Service-Type == SIP-Session, Auth-Type := Digest >> >>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >> >>DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None >> >> >>Also, for those of you using the latest version of freeradius, you may have >>to comment out the following lines as they conflict with dictionary.ser >> >> >(SER > > >>CVS) and dictionary.sip (comes with radiusclient-NG) >> >>#VALUE Service-Type Voice 12 >>#VALUE Service-Type Fax 13 >>#VALUE Service-Type Modem-Relay 14 >>#VALUE Service-Type IAPP-Register 15 >>#VALUE Service-Type IAPP-AP-Check 16 >> >> >>Thanks, >> >> >>Lenir >> >> >>-----Original Message----- >>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On >>Behalf Of Tavis P >>Sent: Friday, October 14, 2005 1:49 PM >>To: lsantiago(a)globalgatewaycom.com >>Cc: serdev(a)iptel.org; serusers(a)iptel.org; devel(a)openser.org; >>users(a)openser.org >>Subject: [Serusers] Re: [Serdev] group_radius radius_is_user_in >> >>Oops, i spoke too soon >> >>It looks like you have placed the "files" module before the "sql" module >>in your radiusd.conf >> >>Its matching your DEFAULT entry in files (setting the Auth-Type to none) >>but the sql module is later changing the Auth-Type to "digest" >> >>Changing the order would solve this problem, as you want it to match the >>SQL statement first and than the section in the files last (which >>changes the Auth-Type) >> >>Also, you may want to reduce the load on your database by not setting >>the Auth-Type in the database and instead setting in the users file with >>a DEFAULT statement as (at least in my case) it isn't somthing that need >>to be dynamic. >> >>lenirsantiago(a)yahoo.com wrote: >> >> >> >> >> >>>Hello list, >>> >>>I've been trying my hardest today to get group_radius to work, and its >>>function radius_is_user_in(). >>>I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and >>> >>> >digest > > >>>authentication. >>> >>>Radius authentication works fine. >>>The problem is that when radius_is_user_in() function gets called, it >>> >>> >sends > > >>>a radius message but without the User-Password field and freeradius >>>complains that it requires it since we are using Digest. >>>I've seen a couple of posts here, but they were never answered: >>>http://mail.iptel.org/pipermail/serusers/2005-March/017342.html >>>http://mail.iptel.org/pipermail/serusers/2005-March/017075.html >>> >>>----- >>>I have a small test in my ser.cfg file: >>> if (!radius_www_authorize("")) { >>> xlog("L_I","%ci - %fu - User not authenticated, Radius >>>Authenticating...\n"); >>> www_challenge("","0"); >>> break; >>> } else { >>> xlog("L_I","%ci - %fu - User authenticated...\n"); >>> }; >>> >>> if (radius_is_user_in("From", "Dialin")){ >>> xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); >>> } else { >>> xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); >>> }; >>> >>> if (radius_is_user_in("Credentials", "Dialin2")){ >>> xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); >>> } else { >>> xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); >>> }; >>> >>>----- >>>In /etc/raddb/users file I have the following at line 152: >>>DEFAULT Auth-Type = System >>> Fall-Through = 1 >>> >>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>> >>>----- >>> >>>These are mysql tables: >>> >>>+----+----------+-----------+----+----------+ >>>| id | UserName | Attribute | op | Value | >>>+----+----------+-----------+----+----------+ >>>| 1 | Jhassell | Password | == | changeme | >>>| 2 | Rneis | Password | == | changeme | >>>| 3 | 1000 | Password | == | 1000 | >>>| 4 | 2000 | Password | == | 2000 | >>>| 5 | 3000 | Password | == | 3000 | >>>| 8 | 1000 | Auth-Type | := | Digest | >>>+----+----------+-----------+----+----------+ >>> >>>+----+-----------+-----------+----+--------+ >>>| id | GroupName | Attribute | op | Value | >>>+----+-----------+-----------+----+--------+ >>>| 6 | Dialin | Auth-Type | := | Accept | >>>+----+-----------+-----------+----+--------+ >>> >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>----+ >>>| id | GroupName | Attribute | op | Value | >>>prio | >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>----+ >>>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >>>0 | >>>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >>>0 | >>>+----+-----------+---------------+----+----------------------------------+ >>> >>> >- > > >>> >>> >>> >>> >>- >> >> >> >> >>>----+ >>> >>>+----+----------+---------------+----+------------------+ >>>| id | UserName | Attribute | op | Value | >>>+----+----------+---------------+----+------------------+ >>>| 1 | 1000 | Reply-Message | = | "Authenticated" | >>>| 2 | 1000 | Sip-Group | = | Dialin | >>>| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >>>+----+----------+---------------+----+------------------+ >>> >>>+----+----------+------------+ >>>| id | UserName | GroupName | >>>+----+----------+------------+ >>>| 1 | Jhassell | Dialin | >>>| 2 | Rneis | Staticdial | >>>| 3 | 1000 | Dialin | >>>| 4 | 2000 | Dialin | >>>| 5 | 3000 | Dialin | >>>| 6 | 3000 | Dialin2 | >>>+----+----------+------------+ >>> >>>------ >>> >>>This is the debug I get from freeradius for the group check: >>> >>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >>>length=67 >>> User-Name = "1000(a)xx.xx.xx.xx" >>> Sip-Group = "Dialin2" >>> Service-Type = Group-Check >>> NAS-IP-Address = 127.0.0.1 >>> NAS-Port = 0 >>>Processing the authorize section of radiusd.conf >>>modcall: entering group authorize for request 74 >>>modcall[authorize]: module "preprocess" returns ok for request 74 >>>modcall[authorize]: module "chap" returns noop for request 74 >>>modcall[authorize]: module "mschap" returns noop for request 74 >>>modcall[authorize]: module "digest" returns noop for request 74 >>> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>"1000(a)xx.xx.xx.xx" >>> rlm_realm: Found realm "xx.xx.xx.xx" >>> rlm_realm: Adding Stripped-User-Name = "1000" >>> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>> rlm_realm: Adding Realm = "xx.xx.xx.xx" >>> rlm_realm: Authentication realm is LOCAL. >>>modcall[authorize]: module "suffix" returns noop for request 74 >>>rlm_eap: No EAP-Message, not doing EAP >>>modcall[authorize]: module "eap" returns noop for request 74 >>> users: Matched entry DEFAULT at line 152 >>> users: Matched entry DEFAULT at line 158 >>>modcall[authorize]: module "files" returns ok for request 74 >>>radius_xlat: '1000' >>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>rlm_sql (sql): Released sql socket id: 0 >>>modcall[authorize]: module "sql" returns ok for request 74 >>>modcall: group authorize returns ok for request 74 >>>rad_check_password: Found Auth-Type Digest >>>auth: type "digest" >>>Processing the authenticate section of radiusd.conf >>>modcall: entering group authenticate for request 74 >>>ERROR: No Digest-Nonce: Cannot perform Digest authentication >>>modcall[authenticate]: module "digest" returns invalid for request 74 >>>modcall: group authenticate returns invalid for request 74 >>>auth: Failed to validate the user. >>>Delaying request 74 for 1 seconds >>>Finished request 74 >>>Going to the next request >>>--- Walking the entire request list --- >>>Waking up in 1 seconds... >>>--- Walking the entire request list --- >>>Waking up in 1 seconds... >>>--- Walking the entire request list --- >>>Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 >>> Reply-Message = "Authenticated" >>>Waking up in 4 seconds... >>>--- Walking the entire request list --- >>>Cleaning up request 74 ID 15 with timestamp 434f1121 >>>Nothing to do. Sleeping until we see a request. >>> >>> >>> >>> >>> >>>Any help in this matter would be deeply appreciated, >>> >>> >>> >>> >>>Lenir >>> >>> >>> >>> >>>_______________________________________________ >>>Serdev mailing list >>>Serdev(a)iptel.org >>>http://mail.iptel.org/mailman/listinfo/serdev >>> >>> >>> >>> >>> >>> >>> >>> >>_______________________________________________ >>Serusers mailing list >>Serusers(a)iptel.org >>http://mail.iptel.org/mailman/listinfo/serusers >> >> >>_______________________________________________ >>Serdev mailing list >>Serdev(a)iptel.org >>http://mail.iptel.org/mailman/listinfo/serdev >> >> >> >> >> >> > > > > > >

2 2

Re: [Users] Openser as non root
by Tavis P 19 Oct '05

19 Oct '05

I set the username and password in the config file with: # User and Group To Run SER As user=openser group=openser Although i'm sure you can use the command line switches as well Besides the usual checking for adequate permissions (use "strace -fF" can be useful for this in some situations) i've not done anything special Chrooting is similar, use strace to find which libraries, dev nodes and support files it needs and create the chroot environment using that information What problem are you having? Nelson Silva wrote: > Tavis: want to share how you did it ? > > thk > > Nelson Silva > ----------------- > email: nelson.silva(a)neuvex.com > website: http://www.neuvex.com > > > Date: Mon, 17 Oct 2005 11:05:21 -0700 > From: Tavis P <tavis.lists(a)galaxytelecom.net > <javascript:top.opencompose('tavis.lists(a)galaxytelecom.net','','','1')>> > Subject: Re: [Users] Openser as non root > To: Users(a)openser.org > <javascript:top.opencompose('Users(a)openser.org','','','1')> > Message-ID: <4353E7E1.2020109(a)galaxytelecom.net > <javascript:top.opencompose('4353E7E1.2020109(a)galaxytelecom.net','','','1')>> > Content-Type: text/plain; charset=ISO-8859-1 > > I'm currently running OpenSER both as non root and also chrooted without > issue > > Nelson Silva wrote: > > > Anyone got a info how to make openser for non root ? > > > > for example, openser -U openser -G openser ? > > > > > > > > thk > > > > Nelson Silva > > ----------------- > > email: nelson.silva(a)neuvex.com > <javascript:top.opencompose('nelson.silva(a)neuvex.com','','','1')> > > website: http://www.neuvex.com > <http://webmail.neuvex.comparse.pl?redirect=http%3A%2F%2Fwww.neuvex.com> > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Users mailing list > >Users(a)openser.org > <javascript:top.opencompose('Users(a)openser.org','','','1')> > >http://openser.org/cgi-bin/mailman/listinfo/users > <http://webmail.neuvex.comparse.pl?redirect=http%3A%2F%2Fopenser.org%2Fcgi-b…> > > > > > > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Users] is_method problem in reply_route
by Klaus Darilion 19 Oct '05

19 Oct '05

Hi! I have a problem with is_method in reply route: is_method("INVITE|UPDATE") does not trigger on a reply to an INVITE, whereas is_method("INVITE") works. in request route blocks, is_method("INVITE|UPDATE") works fine. is there a knwon issue? I can't find the cause :-( regards klaus

2 1

[Users] Bug reports
by Bogdan-Andrei Iancu 19 Oct '05

19 Oct '05

Hi everybody, in term of days, we will start the work of preparing the next release - docs, compilation warnings, version setting, packages,etc. to speed the things up and to end the bug fixing period, please everybody report if there are any remaining known bugs or problems - just to know about them and fix them ASAP. critical ones are fixed (the ones in TM). there are still couple of crashes reported in uac_redirect and uac (from mangling part) modules - we are working on it. thanks and regards, bogdan

1 0

RE: [Users] BYE method accompanied by error
by Sam Lee 19 Oct '05

19 Oct '05

Any help I can get on this one ? Sam -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Sam Lee Sent: Wednesday, October 12, 2005 3:27 PM To: Iqbal; users(a)openser.org Subject: RE: [Users] BYE method accompanied by error I have checked that the phones have not received a prior BYE. Any other idea what is wrong ? Here's a more detailed situation :- Caller (PSTN) --> Voice Gateway --> OPENSER --> Callee (UA) When Callee (UA) tried to end the call , OPENSER will forward a copy of the BYE to Voice Gateway to inform him of the BYE. The Gateway , somehow , replied with a 'Call Leg/Transaction Does Not Exist' . The strange thing is, the Caller (PSTN) was somehow informed of the BYE method and terminate the session . Anyone has any idea how to handle these errors ? I will be glad to provide a ngrep for more reference. Regards, Sam -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Iqbal Sent: Tuesday, October 11, 2005 7:35 PM To: Sam Lee Cc: users(a)openser.org Subject: Re: [Users] BYE method accompanied by error Can you check to see if you have already received a BYE for that call, some phones I had were sending there own Bye's after the GW had Iqbal Sam Lee wrote: > Hi all, > > I would like to know why does my BYE method are always replied with a > 'Call Leg/Transaction does not exist' . How do they compare whether > the transaction in the BYE method exist or not ? ( tag? ftag ? ) Are > there any thing in the config that might cause this kind of problem ? > Just want to highlight that all the calls are made in a good > condition, everything except when the call is ending. > > Please let me know if you dont understand. > > Regards, > Sam > >----------------------------------------------------------------------- >- > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > > _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

4 3

[Users] Makefile problem
by Klaus Darilion 19 Oct '05

19 Oct '05

Hi! There is still a problem with gen_ha1 (conflicting with ser packages). in the deb package is still gen_ha1 with file size 0. I guess it is caused by the "touch" command. $(INSTALL-TOUCH) $(bin-prefix)/$(bin-dir)/gen_ha1 $(INSTALL-BIN) utils/gen_ha1/gen_ha1 \ $(bin-prefix)/$(bin-dir)/$(NAME)_gen_ha1 What is the purpose of the "touch"? Just remove it? regards klaus

2 1

[Users] what is the in_network table for
by Brandon Price 19 Oct '05

19 Oct '05

We have 1 asterisk and 1openser installation, with 1/2 of our users registering to one and 1/2 to the other. What I wanted to do for in network calling is add a column to in_network table thats called ip. In that column I want to put the ip address of the asterisk machine that the calls for those in network users that are registered to it should go. Then somehow set up openser to do a (lookup) then failing that look up the number in this database, if its rewritehost the call to ip in the ip column, else forward to our pstn gateway. Has anyone done this before, how would one handle multiple openser installations with 1/2 of the end users registering to one and the other 1/2 registering to the other barring a shared userloc database? What was the in_network table made for? As always any help greatly appreciated. Thank you.

2 1

[Serusers] RTPproxy between two non routables networks
by Joao Pereira 19 Oct '05

19 Oct '05

Hi, I have SER connected to two non-routable networks: My machine has two IP addresses: 193.136.2.2 and 10.0.0.135 And I want the clients in these two networks o speak each other. I started RTPproxy with "-l 10.0.0.135/193.136.2.2" option. And I tried the configuration example that´s in: /ser-0.9.0/modules/nathelper/examples/alg.cfg Thats my network configuration: client A |-------| client B 193.136.7.13- ------------- 193.136.2.2--| SER |-- 10.0.0.135---------10.0.11.243 public IP client SERs public IP |-------| SERs private IP private IP client But even with RTPproxy and NAThelper it isnt working, because when I call from client A to client B, this happens: INVITE: 193.136.7.13 --> 193.136.2.2 (thats OK) INVITE: 193.136.2.2 --> 10.0.11.243 (ERROR:this cant happen because the networks are non routable) It should be 10.0.0.135 to contact client B. From client B to client A the same happens: INVITE: 10.0.11.243 --> 10.0.0.135 INVITE: 10.0.0.135 --> 193.136.7.13 ERROR: non routable networks Can someone tell me what changes must be done to implement the proxying of the calls between the two SER IP addresses? Thanks Joao Pereira www.fccn.pt

1 0

[Users] Re: group_radius radius_is_user_in
by Tavis P 19 Oct '05

19 Oct '05

Ugh the subject line is getting really munged up ;P Hmmm, what does the output from "radiusd -X" look like for the exchange? Lenir wrote: >Tavis, > >Thanks for your input, that did fix the problem. I did have the "files" >before "sql" in radiusd.conf. Also I followed your advice about taking out >"Auth-Type" out of mysql table and let DEFAULT in users file do the trick. > >However it's semi-working. > >Accourding to the snippet from my ser.cfg file, now I get the following in >stderr: >0(4866) 000d2890-d47f0003-4a230347-53c6189b(a)yy.yy.yy.yy - >sip:1000@xx.xx.xx.xx - User authenticated... > 0(4866) Credentials: User is in Radius Group Dialin!!!! > 0(4866) Credentials: User is in Radius Group Dialin2!!!! > >No matter which parameter I use for the function radius_is_user_in(), it >always returns TRUE. When in fact it should return FALSE for Group Dialin2. >I've tried: > >if (radius_is_user_in("From", "Dialin2")){... >if (radius_is_user_in("Credentials", "Dialin2")){... > > > > > >Here's what I did to fix future problems: > >EFAULT Auth-Type = System > Fall-Through = 1 > >DEFAULT Service-Type == Call-Check, Auth-Type := Digest > >DEFAULT Service-Type == Group-Check, Auth-Type := None > >DEFAULT Service-Type == SIP-Session, Auth-Type := Digest > >DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None > >DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None > > >Also, for those of you using the latest version of freeradius, you may have >to comment out the following lines as they conflict with dictionary.ser (SER >CVS) and dictionary.sip (comes with radiusclient-NG) > >#VALUE Service-Type Voice 12 >#VALUE Service-Type Fax 13 >#VALUE Service-Type Modem-Relay 14 >#VALUE Service-Type IAPP-Register 15 >#VALUE Service-Type IAPP-AP-Check 16 > > >Thanks, > > >Lenir > > >-----Original Message----- >From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On >Behalf Of Tavis P >Sent: Friday, October 14, 2005 1:49 PM >To: lsantiago(a)globalgatewaycom.com >Cc: serdev(a)iptel.org; serusers(a)iptel.org; devel(a)openser.org; >users(a)openser.org >Subject: [Serusers] Re: [Serdev] group_radius radius_is_user_in > >Oops, i spoke too soon > >It looks like you have placed the "files" module before the "sql" module >in your radiusd.conf > >Its matching your DEFAULT entry in files (setting the Auth-Type to none) >but the sql module is later changing the Auth-Type to "digest" > >Changing the order would solve this problem, as you want it to match the >SQL statement first and than the section in the files last (which >changes the Auth-Type) > >Also, you may want to reduce the load on your database by not setting >the Auth-Type in the database and instead setting in the users file with >a DEFAULT statement as (at least in my case) it isn't somthing that need >to be dynamic. > >lenirsantiago(a)yahoo.com wrote: > > > >>Hello list, >> >>I've been trying my hardest today to get group_radius to work, and its >>function radius_is_user_in(). >>I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest >>authentication. >> >>Radius authentication works fine. >>The problem is that when radius_is_user_in() function gets called, it sends >>a radius message but without the User-Password field and freeradius >>complains that it requires it since we are using Digest. >>I've seen a couple of posts here, but they were never answered: >>http://mail.iptel.org/pipermail/serusers/2005-March/017342.html >>http://mail.iptel.org/pipermail/serusers/2005-March/017075.html >> >>----- >>I have a small test in my ser.cfg file: >> if (!radius_www_authorize("")) { >> xlog("L_I","%ci - %fu - User not authenticated, Radius >>Authenticating...\n"); >> www_challenge("","0"); >> break; >> } else { >> xlog("L_I","%ci - %fu - User authenticated...\n"); >> }; >> >> if (radius_is_user_in("From", "Dialin")){ >> xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); >> } else { >> xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); >> }; >> >> if (radius_is_user_in("Credentials", "Dialin2")){ >> xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); >> } else { >> xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); >> }; >> >>----- >>In /etc/raddb/users file I have the following at line 152: >>DEFAULT Auth-Type = System >> Fall-Through = 1 >> >>DEFAULT Service-Type == Group-Check, Auth-Type := None >> >>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >> >>----- >> >>These are mysql tables: >> >>+----+----------+-----------+----+----------+ >>| id | UserName | Attribute | op | Value | >>+----+----------+-----------+----+----------+ >>| 1 | Jhassell | Password | == | changeme | >>| 2 | Rneis | Password | == | changeme | >>| 3 | 1000 | Password | == | 1000 | >>| 4 | 2000 | Password | == | 2000 | >>| 5 | 3000 | Password | == | 3000 | >>| 8 | 1000 | Auth-Type | := | Digest | >>+----+----------+-----------+----+----------+ >> >>+----+-----------+-----------+----+--------+ >>| id | GroupName | Attribute | op | Value | >>+----+-----------+-----------+----+--------+ >>| 6 | Dialin | Auth-Type | := | Accept | >>+----+-----------+-----------+----+--------+ >> >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>----+ >>| id | GroupName | Attribute | op | Value | >>prio | >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>----+ >>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >>0 | >>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >>0 | >>+----+-----------+---------------+----+----------------------------------+- >> >> >- > > >>----+ >> >>+----+----------+---------------+----+------------------+ >>| id | UserName | Attribute | op | Value | >>+----+----------+---------------+----+------------------+ >>| 1 | 1000 | Reply-Message | = | "Authenticated" | >>| 2 | 1000 | Sip-Group | = | Dialin | >>| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >>+----+----------+---------------+----+------------------+ >> >>+----+----------+------------+ >>| id | UserName | GroupName | >>+----+----------+------------+ >>| 1 | Jhassell | Dialin | >>| 2 | Rneis | Staticdial | >>| 3 | 1000 | Dialin | >>| 4 | 2000 | Dialin | >>| 5 | 3000 | Dialin | >>| 6 | 3000 | Dialin2 | >>+----+----------+------------+ >> >>------ >> >>This is the debug I get from freeradius for the group check: >> >>rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >>length=67 >> User-Name = "1000(a)xx.xx.xx.xx" >> Sip-Group = "Dialin2" >> Service-Type = Group-Check >> NAS-IP-Address = 127.0.0.1 >> NAS-Port = 0 >> Processing the authorize section of radiusd.conf >>modcall: entering group authorize for request 74 >> modcall[authorize]: module "preprocess" returns ok for request 74 >> modcall[authorize]: module "chap" returns noop for request 74 >> modcall[authorize]: module "mschap" returns noop for request 74 >> modcall[authorize]: module "digest" returns noop for request 74 >> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>"1000(a)xx.xx.xx.xx" >> rlm_realm: Found realm "xx.xx.xx.xx" >> rlm_realm: Adding Stripped-User-Name = "1000" >> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >> rlm_realm: Adding Realm = "xx.xx.xx.xx" >> rlm_realm: Authentication realm is LOCAL. >> modcall[authorize]: module "suffix" returns noop for request 74 >> rlm_eap: No EAP-Message, not doing EAP >> modcall[authorize]: module "eap" returns noop for request 74 >> users: Matched entry DEFAULT at line 152 >> users: Matched entry DEFAULT at line 158 >> modcall[authorize]: module "files" returns ok for request 74 >>radius_xlat: '1000' >>rlm_sql (sql): sql_set_user escaped user --> '1000' >>rlm_sql (sql): Released sql socket id: 0 >> modcall[authorize]: module "sql" returns ok for request 74 >>modcall: group authorize returns ok for request 74 >> rad_check_password: Found Auth-Type Digest >>auth: type "digest" >> Processing the authenticate section of radiusd.conf >>modcall: entering group authenticate for request 74 >>ERROR: No Digest-Nonce: Cannot perform Digest authentication >> modcall[authenticate]: module "digest" returns invalid for request 74 >>modcall: group authenticate returns invalid for request 74 >>auth: Failed to validate the user. >>Delaying request 74 for 1 seconds >>Finished request 74 >>Going to the next request >>--- Walking the entire request list --- >>Waking up in 1 seconds... >>--- Walking the entire request list --- >>Waking up in 1 seconds... >>--- Walking the entire request list --- >>Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 >> Reply-Message = "Authenticated" >>Waking up in 4 seconds... >>--- Walking the entire request list --- >>Cleaning up request 74 ID 15 with timestamp 434f1121 >>Nothing to do. Sleeping until we see a request. >> >> >> >> >> >>Any help in this matter would be deeply appreciated, >> >> >> >> >>Lenir >> >> >> >> >>_______________________________________________ >>Serdev mailing list >>Serdev(a)iptel.org >>http://mail.iptel.org/mailman/listinfo/serdev >> >> >> >> >> >> > >_______________________________________________ >Serusers mailing list >Serusers(a)iptel.org >http://mail.iptel.org/mailman/listinfo/serusers > > >_______________________________________________ >Serdev mailing list >Serdev(a)iptel.org >http://mail.iptel.org/mailman/listinfo/serdev > > > >

2 2

[Users] Integrating openser auth with other application
by Barry Flanagan 19 Oct '05

19 Oct '05

Hi, I would like to have openser use an existing database and table for auth_db in order to use the same credentials for both openser and email Is it possible to have just the auth_db module use a specific database and table, and all the other modules to use the standard openser tables? When I try this my setting modparam("auth_db", "db_url", "mysql://user:pass@db1/mail") modparam("userloc", "db_url", "mysql://user:pass@db1/openser") Openser complains that the version table cannot be found. Do all tables have to be in the same database, or is it possible to split out just the username/password/domain for auth_db to use a different database? Thanks in advance. -- -Barry Flanagan

3 3

[Serusers] How many BHCC?
by Matteo Piazza 19 Oct '05

19 Oct '05

How many BHCC (busy hour call completions) SER can support? Matteo -------------------------------------- Matteo Piazza, Junior Researcher Create-Net http://www.create-net.it --------------------------------------

2 1

[Serusers] Hot to get call length for billing with mysql accounting
by administrator 19 Oct '05

19 Oct '05

Hello Jiri and everybody I set up ser with accounting and used record_route to force BYEs to visit my server. The problem now is that I do not know how to correlate INVITEs and BYEs to get call duration for billing purposes. Any ideas? Thank you Yiannis Marios

1 0

Re: [Serusers] [OT] MAX TNT as a Media Gateway
by bruno＠openline.com.br 19 Oct '05

19 Oct '05

--- Vamsi Pottangi <vamsipottangi(a)gmail.com> escreveu: > Lucent's MAX TNT works perfect as PSTN/Media gateway ! I din't find any > problems as of now. > I used 8E1 cards with madd2,madd3 cards for SIP. Yes, it supports most > codecs including g729. > It doesn't have any problem with interoperating with SER. Hello which OS version are you using on your TNT? Cheers !3runo

1 0

[Serusers] Problem with CANCEL and call redirection
by Xavier TRENTIN 19 Oct '05

19 Oct '05

Hi all, I'm trying to do a serial call forwarding if callees don't answer. I've added a field in a table which is the number the users want to forward the call if they don't answer. I've a shell script (myScript.sh) which works like that: If the forward mode is activated for the user, then the address is overwritten and the script returns 0, else it returns 1. My main route ends by "t_on_failure("1");" in my ser.cfg, and I've write these lines after the main route: /failure_route[1] { if (exec_dset("/path/to/myscript/myScript.sh \"$SIP_HF_TO\"")); { route(2); } break; } route[2] { sl_send_reply("300","Redirect"); break; } / I also use the tm module and I've set the fr_inv_timer and the fr_timer to the values I wanted. In my configuration : User 1 wants to forward the call to User 2. User 2 wants to forward the call to User 3. User 3 wants to forward the call to User 1. When User 4 calls User 1, who doesn't answer, the call is well forwarded to User 2 after 5 ringings. User 2 doesn't answer and the call is well forwarded to User 3 . Etc. So it works fine, if at least one of the callee answers. But if the caller hangs up (sending a CANCEL to the callee), the phones are always ringing and forwarding the call in the same order. Does anybody have an idea to solve this problem? Thanks. B.R. Xavier.

1 0

[Serusers] Can I send Binary Data through SIP IM?
by Abhijit A. Mahajani 19 Oct '05

19 Oct '05

Hi, Can I send Binary Data thorough SIP IM? Does The SIP IM has an option to set the data as Binary? As far as i know, SIP IM genarally process text data. Thanks and regards. Abhijit

1 0

[Serusers] [OT] MAX TNT as a Media Gateway
by Rodrigo P. Telles 19 Oct '05

19 Oct '05

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Folks, I used MAX TNT for dial-up users in the past and now I have a choice to update that equipment to support SIP and act as a PSTN/Media Gateway. I have some doubts about it: 1 - Is there some one using it? (what hardware configuration?) 2 - Does it support all CODEC's? 3 - Does it 'speak' SIP well with SER/OpenSER? (any reference about supported RFC's?) 4 - Any other additional information is welcome! Thanks in advance. - -- ============================================ Rodrigo P. Telles <telles(a)devel.it> TI Manager Devel-IT - http://www.devel.it IVOZ # 1029 +55 14 3324-1200 Bestcom Group ============================================ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFDVBViiLK8unYgEMQRAtUYAJ9b8c5CAMd+Exxdcc/mtEvP927zIwCff6ZE ajusWOEWVjxGEVzo+SSQyZg= =FHXs -----END PGP SIGNATURE-----

2 1

[Serusers] WM Contact problem
by Geovany Andres Gonzalez Ruiz 18 Oct '05

18 Oct '05

Hello, I am using SER + MySQL, and I had a problem. When I used the WM software to register against the SER in the Location table only had in the contact field the domain of WM, I meant The first message was: 192.168.0.138:5060 -> 192.168.0.184:12469 SIP/2.0 200 OK..Via: SIP/2.0/UDP 192.168.0.184:12469.. From:<sip:gagonzal@cursovoip.com>;tag=09c07cd1-f595-4fff-bcf9-7b12e6721bf5.. To:<sip:gagonzal@cursovoip.com>;tag=b27e1a1d33761e85846fc98f5f3a7e58.7529..Call-ID: 1ee7bb57-9c25-4e65-b4ac-4264317ebe7d(a)192.168.0.184.. CSeq: 2 REGISTER.. Contact:<sip:192.168.0.184:12469>;expires=1200..Server: Sip EXpress router (0.9.3(i386/linux)).. Content-Length: 0..Warning: 392 192.168.0.138:5060 "Noisy feedback tells: pid=9156 req_src_ip=192.168.0.184 req_src_port=1083 in_uri=sip:cursovoip.com out_uri=sip:cursovoip.com via_cnt==1" serctl ul show ...Record(0xb5ebff88)... domain: 'location' aor : 'gagonzal' ~~~Contact(0xb5ec01f8)~~~ domain : 'location' aor : 'gagonzal' Contact : 'sip:192.168.0.184:12469' Expires : 1157 q : Call-ID : '1ee7bb57-9c25-4e65-b4ac-4264317ebe7d(a)192.168.0.184' CSeq : 2 User-Agent: 'Windows RTC/1.0' received : '' State : CS_SYNC Flags : 0 next : (nil) prev : (nil) Someone knows how could I change the behavior of windows messanger to send the contact field like that (<sip:192.168.0.184:12469>) without specific information of the user? or Someone knows how could I prepare SER to manipulate the REGISTER message and put in the contact field in the location table the information from URI ?? Thanks in advance. Atentamente, Geovany Andrés González Ruiz Curriculum Lead (CL) CATC (Cisco Academy Trainig Center) Colombia-Ecuador Universidad Nacional de Colombia http://cnap.unalmed.edu.co

1 0

[Serusers] 423 message for Register Expires
by share phone 18 Oct '05

18 Oct '05

Hi All, The default_expires is 600 and my min is 300 and max expires is 600 when i send the REGISTER message with 3600 it should send me 423 with 600 the openser.cfg do not do it. openser.cfg modparam("registrar","default_expires",600) modparam("registrar","min_expires",600) modparam("registrar","max_expires",1200) Is there any settings that need to be done. Regards, sunil. --------------------------------- Yahoo! Music Unlimited - Access over 1 million songs. Try it free.

1 0

Re: [Users] Openser as non root
by Daniel-Constantin Mierla 18 Oct '05

18 Oct '05

apart of the command line options (see openser -h) you can set some parameters in the configuration file in order to switch the user and group. Check the dokuwiki: http://openser.org/dokuwiki/doku.php?id=openser_core_cookbook#group_gid http://openser.org/dokuwiki/doku.php?id=openser_core_cookbook#user_uid Cheers, Daniel On 10/18/05 11:40, Nelson Silva wrote: > > Tavis: want to share how you did it ? > > thk > > Nelson Silva > ----------------- > email: nelson.silva(a)neuvex.com > website: http://www.neuvex.com > > > Date: Mon, 17 Oct 2005 11:05:21 -0700 > From: Tavis P <tavis.lists(a)galaxytelecom.net > <javascript:top.opencompose('tavis.lists(a)galaxytelecom.net','','','1')>> > Subject: Re: [Users] Openser as non root > To: Users(a)openser.org > <javascript:top.opencompose('Users(a)openser.org','','','1')> > Message-ID: <4353E7E1.2020109(a)galaxytelecom.net > <javascript:top.opencompose('4353E7E1.2020109(a)galaxytelecom.net','','','1')>> > Content-Type: text/plain; charset=ISO-8859-1 > > I'm currently running OpenSER both as non root and also chrooted without > issue > > Nelson Silva wrote: > > > Anyone got a info how to make openser for non root ? > > > > for example, openser -U openser -G openser ? > > > > > > > > thk > > > > Nelson Silva > > ----------------- > > email: nelson.silva(a)neuvex.com > <javascript:top.opencompose('nelson.silva(a)neuvex.com','','','1')> > > website: http://www.neuvex.com > <http://webmail.neuvex.comparse.pl?redirect=http%3A%2F%2Fwww.neuvex.com> > > > > > >------------------------------------------------------------------------ > > > >_______________________________________________ > >Users mailing list > >Users(a)openser.org > <javascript:top.opencompose('Users(a)openser.org','','','1')> > >http://openser.org/cgi-bin/mailman/listinfo/users > <http://webmail.neuvex.comparse.pl?redirect=http%3A%2F%2Fopenser.org%2Fcgi-b…> > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

1 0

[Serusers] call drops after about 30 seconds
by maka 18 Oct '05

18 Oct '05

hello everyone, I am using ser-0.9.0 together wit asterisk-1.0.6. I am testing it with a couple of hardware AT-320 IP phones from Atcom, using a PA168S chip. They seem to be working fine, with stun behind nat, and they can call other user-agents (softphones, asterisk adn the pstn through it), but whenever I make a call between the two phones, everytime the call is dropped after about 34 seconds, even when calling between phones on Public IP addresses. I am actually clueless why this happens, I tried changing the NAT ttl value, bu to no effect, and it is not supposed to be a codec mismatch too since both phones use absolutely the same codecs, in the same order of preference. Appreciate the feedback, cheers -- I'm sick and tired of being sick and tired...

1 0

[Serusers] mangling request URI according to To: and userlocation value
by Francesco Fondelli 18 Oct '05

18 Oct '05

Hi all, let's say SER receives this invite: INVITE sip:foopbx@ip.com SIP/2.0 Via: ... To: "058633345880101" <058633345880101(a)ip.com> [cut] and assume that there is an entry in the user location table for ''foopbx(a)ip.com" (ie it registered with SER) and assume that entry in userloc has a "Server: Bar 1.0 PBX" value I'm wondering if is possible to do something like that: if (!lookup("location")) { log(1, "User not in user database...\n"); route(whatever); break; }; if(get_server_string_from_userloc() =~ "Bar 1.0 PBX") { take the number from the "To:" header and write it in the request uri. So the forwarded msg will look like: INVITE sip:058633345880101@ip.com SIP/2.0 Via: ... To: "058633345880101" <058633345880101(a)ip.com> [cut] }; thank you very much, I really need your help Ciao FF

1 1

[Serusers] Billing System Asterisk works
by Mr Greg Plater 18 Oct '05

18 Oct '05

AstBill http://astbill.com/whatis This billing system I have implemented and tested to work for both prepaid and post paid billing Simple to setup with asterisk and easy to manage. Uses: AstBill Drupal Mysql Apache Calls pass to Asterisk from ser for termination to PSTN. They are rated and billed. I have edited SERWEB to display account records and current prepaid balances from Astbill database Check it out it works

1 0

Re: [Users] Openser as non root
by Nelson Silva 18 Oct '05

18 Oct '05

1 0

[Users] Multiple media proxy
by Fernando Rodriguez 18 Oct '05

18 Oct '05

Hello, Im trying tos et up media Proxy to listen to various ip y changed the mediaporxy.ini and started various mediaproxyX.py on my box I wondering how to tell openser to use the socks. Now I have this in my openser.cfg modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy", "natping_interval", 20) modparam("mediaproxy", "mediaproxy_socket", "/var/run/proxydispatcher.sock") can I set up multiple lines regarding mediaproxy.sock ?? modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy1.sock") modparam("mediaproxy", "mediaproxy_socket", "/var/run/mediaproxy2.sock") what about proxydispatcher.py do I also have to set up multiple instances of it ?? please any information regarding this will be appreciated Thanks a lot

3 2

[Serusers] iptel AA
by tcchan 18 Oct '05

18 Oct '05

Hello, Does anybody know the status of iptel AA module? If you go to the web site www.iptel.org/aa/, you can see that the product is available under iptel's commercial license and the contact is info(a)iptel.org. Problems is I tried twice to contact them and there is no response. What happen? Regards, TC Chan

2 1

[Serusers] no login to openser
by Ronald Wiplinger 18 Oct '05

18 Oct '05

(It is my first try, .... I am sure I make something wrong) I have installed openser and it is now running for a while, ... today I have added two users by: export SIP_DOMAIN=voip.mydomain.com openserctl add 800000 secret0 me(a)mydomain.com openserctl add 800001 secret1 me(a)mydomain.com first test: openserctl ul show Dumping all contacts may take long: are you sure you want to proceed? [Y|N] y ===Domain list=== ---Domain--- name : 'aliases' size : 512 table: 0x2a96f6d120 d_ll { n : 0 first: (nil) last : (nil) } ---/Domain--- ---Domain--- name : 'location' size : 512 table: 0x2a96f68f38 d_ll { n : 1 first: 0x2a96f71180 last : 0x2a96f71180 } ...Record(0x2a96f71180)... domain: 'location' aor : 'admin' ~~~Contact(0x2a96f71298)~~~ domain : 'location' aor : 'admin' Contact : 'sip:601@vpbx.elmit.com' Expires : Permanent q : 1 Call-ID : 'The-Answer-To-The-Ultimate-Question-Of-Life-Universe-And-Everything' CSeq : 42 User-Agent: 'SIP Express Router FIFO' received : '' State : CS_SYNC Flags : 128 Sock : none (null) next : (nil) prev : (nil) ~~~/Contact~~~~ .../Record... ---/Domain--- ===/Domain list=== Here it says domain: 'location' that sounds for me not correct, shouldn't it be voip.mydomain.com ?? I use than a hard phone and set it up, but it cannot log on, ... I also do not see anything happen, when I use openserctl moni What have I done wrong? BTW, I checked with serweb, and the user 800000 can login! bye Ronald Wiplinger

2 7

[Serusers] Caller ID revisited....
by sip 17 Oct '05

17 Oct '05

So... I've scoured the archives and can't find quite the answer I'm looking for. I'd like to do caller ID in such a way that the 'Display Name' or, in sip terms, comment portion of the From header, isn't displayed for ALL users (or is displayed in a particular format for ALL users). I know I can use UAC to rewrite a particular From tag in a particular way, but I haven't figured out how to make those changes heuristically global. For instance, I'd like a way to say that if the From tag looked like: From: "Jimmy the Fish" <sip:11231234567@sip.domain.com>;tag=3905520531 I'd like to rewrite it to be either: From: <sip:11231234567@sip.domain.com>;tag=3905520531 OR From: "1-123-123-4567" <sip:11231234567@sip.domain.com>;tag=3905520531 Or some such. I'd like to have heuristic control, in that I'd rather not have to have a UAC rewrite entry for each number. If it has to be done via a db query, fine, but I don't get how to do that, either. Any ideas? N.

1 0

Re: [Serusers] save("location") causing routing errors?
by Patrick Jordan-Smith 17 Oct '05

17 Oct '05

On Sun, 2005-10-16 at 17:57 -0400, sip wrote: > That should be couched in an if(method=="REGISTER") block. > > > In such a way, it would never GET an INVITE > Yes, but then how do we handle a situation where the server has fallen over (happens sometimes) and then come back up, we check them but until the UA sends another REGISTER we don't know where they are and can't get incoming calls to that UA. Maybe I can force the re-register period to be really small (5 seconds?) Thanks for your help, Patrick -- Patrick Jordan-Smith Mercury Telecommunications Ltd voice +64-9-916-0300 paper +64-9-916-0301

2 4

[Serusers] onsip feature fwd script with asterisk voicemail
by Aisling 17 Oct '05

17 Oct '05

Hi, I was wondering if anyone has asterisk voicemail working with the default onsip feature forwarding script?...If so would it be possible to post the relevant snippets? Many thanks. Aisling. -------------------Legal Disclaimer--------------------------------------- The above electronic mail transmission is confidential and intended only for the person to whom it is addressed. Its contents may be protected by legal and/or professional privilege. Should it be received by you in error please contact the sender at the above quoted email address. Any unauthorised form of reproduction of this message is strictly prohibited. The Institute does not guarantee the security of any information electronically transmitted and is not liable if the information contained in this communication is not a proper and complete record of the message as transmitted by the sender nor for any delay in its receipt.

2 1

Re: [Users] Openser as non root
by Tavis P 17 Oct '05

17 Oct '05

I'm currently running OpenSER both as non root and also chrooted without issue Nelson Silva wrote: > Anyone got a info how to make openser for non root ? > > for example, openser -U openser -G openser ? > > > > thk > > Nelson Silva > ----------------- > email: nelson.silva(a)neuvex.com > website: http://www.neuvex.com > > >------------------------------------------------------------------------ > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

1 0

[Users] Openser as non root
by Nelson Silva 17 Oct '05

17 Oct '05

1 0

[Users] monitor ser
by Richard Z 17 Oct '05

17 Oct '05

Hi, I'd like to use monit to monitor ser. Sometime ser has the pid file, but stops responding to any request. I want to periodically send an OPTIONS message to the udp port 5060 and expects the answer back. However can't make it work with monit. The config is something like this, check process program with pidfile /var/run/ser.pid start program = "/etc/init.d/rc.serstart" stop program = "/etc/init.d/rc.serstop" if failed port 5060 type udp send "OPTIONS sip:test@........" expect "SIP/2.0 200 OK" with timeout 2 seconds then alert I can see the reply with ngrep. But monit still reports "connection failed". Any suggestion? Thanks, Richard

3 4

[Serusers] sending data via message
by Ángel Gómez 17 Oct '05

17 Oct '05

Is posible to send data using the MESSAGE pirmitive? Can i use the content-tipe to set oter content types in the MESSAGE? I need to send data throug a SIP server, not opening a new conexion. Can any one help me?

1 0

[Users] how set timeout when connection is terminate (send BYE command)
by Michal Prorok 17 Oct '05

17 Oct '05

Hello, How can I set timeout for BYE command when connection will be terminated (reset computer eg.). In acc table is only INVITE+ACK, but not BYE command. Failure route is: failure_route[1] { if (t_check_status("487")) { break; }; if (isflagset(26) && t_check_status("486")) { if (avp_pushto("$ruri", "s:fwdbusy")) { avp_delete("s:fwdbusy"); resetflag(26); route(6); break; }; }; if (isflagset(27) && t_check_status("408")) { if (avp_pushto("$ruri", "s:fwdnoanswer")) { avp_delete("s:fwdnoanswer"); resetflag(27); route(6); break; }; }; Regards Michal Prorok

2 1

[Serusers] SER Call forwording with Shell Skript
by Like 17 Oct '05

17 Oct '05

Hello Community, How can I send a reply to a second SIP Uri ? I found this code in the Web: [CODE] cat > /tmp/ser_fifo <<EOF :t_uac_dlg:ser_fifo MESSAGE $SIP_ORUI . From: IMtoSMS(a)192.168.0.16 To: $SIP_ORUI Contact: $SIP_HF_CONTACT Content-Type: text/plain; charset=UTF-8 x:+$SMS . #$SIP_HF_FROM: $text $@ . EOF [/CODE] When I tried to send the Message , Ser show me a lot of errors like this: [ERROR] fifo_server: Command must begin with :: Message or must begin with to: [/ERROR] I become a Call from User A to User B. So User A called test(a)mydomain.de and Ser is routing this call to an Skript which start its work. At the End of these Skript, i will send this INVITE from Caller A to Caller B with forwording or so. How can i do this ? Can i do this , with the Code from the upper Skript ? Thanx for your help, Dirk

1 0

[Serusers] Openser ENUM or Asterisk
by Ronald Wiplinger 17 Oct '05

17 Oct '05

Can anybody give me a hint, please. I want to use Openser to connect in this order: a. SIP phones to SIP phones directly b. ENUM lookup and connect c. forward to Asterisk bye Ronald Wiplinger

3 2

RE: RE: [Serusers] Radius authentication and accounting issues
by deepak.chandrasekaran＠wipro.com 17 Oct '05

17 Oct '05

I followed the instructions in SER_RADIUS how-to but still I am not sure about getting SER work with radius support… I am successful in installing freeradius and radiusclient-ng libraries…the sample tests as given in that doc seems to work fine. I am not very sure about the configuration changes to be done with ser.cfg…can u please tell me the changes required for the same? Thanks & Regards, Deepak ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of zhangshuai Sent: Monday, October 17, 2005 4:35 PM To: serusers Subject: Re: RE: [Serusers] Radius authentication and accounting issues Dear deepak.chandrasekaran, 　　 No need to load auth_db. About how to configure ser and radius, you could check it over here: http://www.iptel.org/ser/doc/ser_radius/ser_radius.html I hv loaded the mysql.so module but am not sure if auth_db is also required… Can you suggest the changes required for SER radius support? Regards, Deepak ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of zhangshuai Sent: Monday, October 17, 2005 2:46 PM To: serusers Subject: Re: RE: [Serusers] Radius authentication and accounting issues Dear deepak.chandrasekaran, Do you load the module "mysql.so"?　　 Hi harry, I don’t find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

[Users] Speeddial module
by Reto.Kortas＠t-systems.com 17 Oct '05

17 Oct '05

Hi, is it possible to use the speeddial module on a per-domain mode. All subscribers, which belong to the same domain, shall be able to use the same speeddial entries. Reto

2 1

Re: RE: [Serusers] Radius authentication and accounting issues
by zhangshuai 17 Oct '05

17 Oct '05

Dear deepak.chandrasekaran, 　　 No need to load auth_db. About how to configure ser and radius, you could check it over here: http://www.iptel.org/ser/doc/ser_radius/ser_radius.html I hv loaded the mysql.so module but am not sure if auth_db is also required… Can you suggest the changes required for SER radius support? Regards, Deepak From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of zhangshuai Sent: Monday, October 17, 2005 2:46 PM To: serusers Subject: Re: RE: [Serusers] Radius authentication and accounting issues Dear deepak.chandrasekaran, Do you load the module "mysql.so"?　　 Hi harry, I don’t find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak

1 0

RE: [Serusers] Radius authentication and accounting issues
by deepak.chandrasekaran＠wipro.com 17 Oct '05

17 Oct '05

I hv loaded the mysql.so module but am not sure if auth_db is also required… Can you suggest the changes required for SER radius support? Regards, Deepak ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of zhangshuai Sent: Monday, October 17, 2005 2:46 PM To: serusers Subject: Re: RE: [Serusers] Radius authentication and accounting issues Dear deepak.chandrasekaran, Do you load the module "mysql.so"?　　 Hi harry, I don’t find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

[Serusers] ser sems, how to
by Abdul Lateef 17 Oct '05

17 Oct '05

Hi all, I am really caught in big trouble. How I can make link SEMS with SER to use SEMS IVR. I was trying using ser_for_ivr configuration file which is shipped with SEMS plug-in. but i found that loadmodule "/usr/local/lib/ser/modules/vm.so" is not working because I cannot see any module name with vm.so. I will be really so appreciated if any one can point me right way. -------- Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

1 0

[Users] acc with radius compilation error
by jayesh nambiar 17 Oct '05

17 Oct '05

hi all, I am using openser 0.9.5. I wanted to radius only accounting. I downloaded radius from freeradius. But while compiling acc with radius support it gives an error. I am running openser on fedora core 4. Anyone faced a similar problem. Any advice will help me. thanks jayesh --------------------------------- Yahoo! Music Unlimited - Access over 1 million songs. Try it free.

3 4

RE: RE: [Serusers] Radius authentication and accounting issues
by deepak.chandrasekaran＠wipro.com 17 Oct '05

17 Oct '05

I hv loaded the mysql.so module but am not sure if auth_db is also required… Can you suggest the changes required for SER radius support? Regards, Deepak ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@iptel.org] On Behalf Of zhangshuai Sent: Monday, October 17, 2005 2:46 PM To: serusers Subject: Re: RE: [Serusers] Radius authentication and accounting issues Dear deepak.chandrasekaran, Do you load the module "mysql.so"?　　 Hi harry, I don’t find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak -----Original Message----- From: harry gaillac [mailto:gaillacharry@yahoo.fr] Sent: Monday, October 17, 2005 1:46 PM To: Deepak Chandrasekaran (WT01 - Voice & Next Generation Networks) Subject: RE: [Serusers] Radius authentication and accounting issues hello, Post you error message Harry --- deepak.chandrasekaran(a)wipro.com a 閏rit : > > Hi all, > > > > I am trying to provide radius authentication and > accounting in ser > 0.9.3. > > I am using freeradius 1.0.4. > > > > I have compiled SER successfully and got all .so > files. > > > > Every time I try to start ser, it crashes. > > Can anybody suggest some possible reasons as to why > this happens? > > > > I followed radius how-to doc to configure radius > server and > radiusclient-ng 0.5.1 library. > > > > Can anyone provide with sample ser.cfg file modified > to use radius > authentication and accounting? > > > > Any help would be greatly appreciated. > > > > Thanks in advance. > > > > Regards, > > Deepak > > > > > > > > Confidentiality Notice > > The information contained in this electronic message > and any attachments to this message are intended > for the exclusive use of the addressee(s) and may > contain confidential or privileged information. If > you are not the intended recipient, please notify > the sender at Wipro or Mailadmin(a)wipro.com > immediately > and destroy all copies of this message and any attachments.> _______________________________________________ > Serusers mailing list > Serusers(a)iptel.org > http://mail.iptel.org/mailman/listinfo/serusers > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T閘閏hargez cette version sur http://fr.messenger.yahoo.com Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

Re: RE: [Serusers] Radius authentication and accounting issues
by zhangshuai 17 Oct '05

17 Oct '05

Dear deepak.chandrasekaran, Do you load the module "mysql.so"?�� Hi harry, I don��t find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak -----Original Message----- From: harry gaillac [mailto:gaillacharry@yahoo.fr] Sent: Monday, October 17, 2005 1:46 PM To: Deepak Chandrasekaran (WT01 - Voice & Next Generation Networks) Subject: RE: [Serusers] Radius authentication and accounting issues hello, Post you error message Harry --- deepak.chandrasekaran(a)wipro.com a �crit : > > Hi all, > > > > I am trying to provide radius authentication and > accounting in ser > 0.9.3. > > I am using freeradius 1.0.4. > > > > I have compiled SER successfully and got all .so > files. > > > > Every time I try to start ser, it crashes. > > Can anybody suggest some possible reasons as to why > this happens? > > > > I followed radius how-to doc to configure radius > server and > radiusclient-ng 0.5.1 library. > > > > Can anyone provide with sample ser.cfg file modified > to use radius > authentication and accounting? > > > > Any help would be greatly appreciated. > > > > Thanks in advance. > > > > Regards, > > Deepak > > > > > > > > Confidentiality Notice > > The information contained in this electronic message > and any attachments to this message are intended > for the exclusive use of the addressee(s) and may > contain confidential or privileged information. If > you are not the intended recipient, please notify > the sender at Wipro or Mailadmin(a)wipro.com > immediately > and destroy all copies of this message and any attachments.> _______________________________________________ > Serusers mailing list > Serusers(a)iptel.org > http://mail.iptel.org/mailman/listinfo/serusers > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger T�l�chargez cette version sur http://fr.messenger.yahoo.com

1 0

RE: [Serusers] Radius authentication and accounting issues
by deepak.chandrasekaran＠wipro.com 17 Oct '05

17 Oct '05

Hi harry, I don't find any error messages. But whenever I try to start SER, it crashes immediately. I am attaching the ser.cfg file herewith. Here is the log message: Nov 16 11:01:01 crond(pam_unix)[29639]: session closed for user root Nov 16 12:01:01 crond(pam_unix)[30131]: session opened for user root by (uid=0) Nov 16 12:01:01 crond(pam_unix)[30131]: session closed for user root Nov 16 13:01:01 crond(pam_unix)[30623]: session opened for user root by (uid=0) Nov 16 13:01:02 crond(pam_unix)[30623]: session closed for user root Nov 16 14:01:01 crond(pam_unix)[31115]: session opened for user root by (uid=0) Nov 16 14:01:02 crond(pam_unix)[31115]: session closed for user root Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ser: WARNING: fix_socket_list: could not rev. resolve 10.200.220.8 Nov 16 14:14:23 ./ser[31240]: Maxfwd module- initializing Am I missing out something? Thanks & Regards, Deepak -----Original Message----- From: harry gaillac [mailto:gaillacharry@yahoo.fr] Sent: Monday, October 17, 2005 1:46 PM To: Deepak Chandrasekaran (WT01 - Voice & Next Generation Networks) Subject: RE: [Serusers] Radius authentication and accounting issues hello, Post you error message Harry --- deepak.chandrasekaran(a)wipro.com a écrit : > > Hi all, > > > > I am trying to provide radius authentication and > accounting in ser > 0.9.3. > > I am using freeradius 1.0.4. > > > > I have compiled SER successfully and got all .so > files. > > > > Every time I try to start ser, it crashes. > > Can anybody suggest some possible reasons as to why > this happens? > > > > I followed radius how-to doc to configure radius > server and > radiusclient-ng 0.5.1 library. > > > > Can anyone provide with sample ser.cfg file modified > to use radius > authentication and accounting? > > > > Any help would be greatly appreciated. > > > > Thanks in advance. > > > > Regards, > > Deepak > > > > > > > > Confidentiality Notice > > The information contained in this electronic message > and any attachments to this message are intended > for the exclusive use of the addressee(s) and may > contain confidential or privileged information. If > you are not the intended recipient, please notify > the sender at Wipro or Mailadmin(a)wipro.com > immediately > and destroy all copies of this message and any attachments.> _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

[Serusers] only receive trying,but no ring
by fishman7788 17 Oct '05

17 Oct '05

hi I now work to make a call,receive the tring packet but now ring later,the packet is below,pls help. > Received from udp:10.110.11.9:5060 at 17/10/2005 16:46:47:875 (555 bytes): SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 10.110.10.149:1357;branch=z9hG4bK-rkad5409p17a;rport=1357 From: "test1" <sip:1234@10.110.11.9>;tag=b820xr0tze To: <sip:5678@10.110.11.9;user=phone> Call-ID: f56453439fd5-qaod8sww6dpi@snomSoft CSeq: 1 INVITE Server: Sip EXpress router (0.8.12 (i386/linux)) Content-Length: 0 Warning: 392 10.110.11.9:5060 "Noisy feedback tells: pid=24182 req_src_ip=10.110.10.149 req_src_port=1357 in_uri=sip:5678@10.110.11.9;user=phone out_uri=sip:5678@0.0.0.0:1511;line=3tjczupg via_cnt==1" > 　　　　　　　　fishman7788 　　　　　　　　fishman7788(a)163.com 　　　　　　　　　　2005-10-17

1 0

Re: [Serusers] serweb: DB Error: no such field
by Karel Kozlik 17 Oct '05

17 Oct '05

Hi, > Oct 14 18:23:12 serweb [error] file: > /usr/local/serweb/modules/subscribers/method.get_users.php:119: DB > Error: no such field - select s.username from subscriber s where > s.domain = 'vpbx.elmit.com' and true [nativecode=1054 ** Unknown column > 'true' in 'where clause'] Interesting. Which version of mysql are you useing? It seems some older version doesn't know the keyword 'true'. Thanks for report, I will fix it. >> For get latest stable version use this command: >> cvs -d:pserver:anonymous@cvs.berlios.de:/cvsroot/serweb co -P -r >> rel_0_9_2 serweb >> > I will try that, if we cannot get that to work ;-) I guess it is easier way for you :-) > Does 0_9_2 work with cvs of openser? Sorry, I don't know. May be yes, but I never tested it and I don't know details about openser. > I see on you email address iptel.org I read somewhere that there is a > full ser.cfg of iptel in the /etc directory for reference, but I did not > find it. I would like to study it. Although for the moment I just need: > Ser on port 5060. If enum, handle it, if not enum forward all to > asterisk on port 5061. It is in dir etc/obsoleted. But I'm not sure if these files are in released version of ser. If they isn't look at cvs: http://cvs.berlios.de/cgi-bin/viewcvs.cgi/ser/sip_router/etc/obsoleted/ Karel

1 0

[Users] Radius accounting and freeside
by harry gaillac 17 Oct '05

17 Oct '05

Hello, I try to setup ser-0.9.4 for accounting with freeradius-1.0.2 and mysql-4. Here is a part of my ser.cfg file # -- acc params -- modparam("acc", "db_url", "mysql://xxx:xxx@nxs.yi.org/ser") modparam("acc", "radius_config", "/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "log_fmt", "miocfsp") modparam("acc", "failed_transactions", 1) modparam("acc", "db_flag", 2) modparam("acc", "db_missed_flag", 3) modparam("acc", "service_type", 16) modparam("acc", "report_cancels", 1) modparam("acc", "report_ack", 1) modparam("acc", "radius_flag", 4) modparam("acc", "radius_missed_flag", 5) I set "setflag(4);" for INVITE BYE and CANCEL messages. Look at my sql.php.html file (no script) I can't fix Acct-Start-Time and Acct-Stop-Time to calculate Acct-Session-Time with freeside How can I do it ? Thanks for help Regards Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

2 1

[Serusers] Radius authentication and accounting issues
by deepak.chandrasekaran＠wipro.com 17 Oct '05

17 Oct '05

Hi all, I am trying to provide radius authentication and accounting in ser 0.9.3. I am using freeradius 1.0.4. I have compiled SER successfully and got all .so files. Every time I try to start ser, it crashes. Can anybody suggest some possible reasons as to why this happens? I followed radius how-to doc to configure radius server and radiusclient-ng 0.5.1 library. Can anyone provide with sample ser.cfg file modified to use radius authentication and accounting? Any help would be greatly appreciated. Thanks in advance. Regards, Deepak Confidentiality Notice The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Wipro or Mailadmin(a)wipro.com immediately and destroy all copies of this message and any attachments.

1 0

[Serusers] Username conventions with Asterisk as voicemail ???
by Daryl Sanders 17 Oct '05

17 Oct '05

I'm looking for pointers, best practices or experiences from SER users who are using Asterisk for voicemail-only in their SER setup, especially when it comes to planning username/extension/mailbox naming schemes. This is for a large-scale deployment (10K+ users) so I want to get it right the first time. Many of my users will have DIDs tied to their account while others will not. Are there any advantages/disadvantages to having alpha-numeric SER usernames and using aliases for DID numbers? I'm not sure if it matters, but we will be using a third party PSTN provider and will need to support DIDs from multiple countries. Also, are there any scripts available to automatically create an Asterisk voicemail box when a new user is added to SER? As always, your input is greatly appreciated! - Daryl

4 6

[Serusers] Changeing a number dialed for pstn
by Mr Greg Plater 17 Oct '05

17 Oct '05

Hi Does anyone know how I can make a change in my ser.cfg file to change a number dialed Example: Someone dials 738211234 And I wish to send the number out to pstn as 61738211234 I use the following to send out 61738211234 but I would rather shorten the numbers dialed by a user and have the 61 auto added. if (uri=~"^sip:[0-9]{11}@") { # Domestic PSTN Australia wide route(4); break; }; # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- rewritehost("202.173.179.228"); # PSTN GATEWAY IP ADDRESS Asterisk Bridge avp_write("i:45", "inv_timeout"); route(5); route(1); } route[5] {

2 1

[Serusers] Prepaid Service
by Ryan Pagquil 16 Oct '05

16 Oct '05

Hi Guys, I'm wondering how can I terminate active SIP sessions when they already consumed their credits. Because I want to make a prepaid service for VoIP. Is there any known application that can implement prepaid service for VoIP? Please help on this... Thanks, -- Ryan Pagquil Infodyne Inc. - PhilOnline.com 3603 Antel Global Corporate Center Doña Julia Vargas Ave. Ortigas Center Pasig City Tel: 687-0715 Web: www.philonline.com

4 3

[Serusers] SIPSAK
by Rick Thompson 16 Oct '05

16 Oct '05

Just started to try SIPSAK and I'm getting the following error Sipsak -T -s sip:1079#a.b.c.d:5060 warning: IP extract from warning activated to be more informational error: this FQDN or IP is not valid: rtlaptop does anyone know why? Thanks Richard C. Thompson

4 3

[Serusers] TCP/TLS and NAT. Problem with BYE...
by Alexander Ph. Lintenhofer 16 Oct '05

16 Oct '05

Hi everybody, A short question: alice(a)atlanta.com is behind NAT. She uses TCP to connect her UAC to sip.atlanta.com in the public network. Inviting bob(a)biloxi.com suceeds. But Bob can't terminate the call. His BYE is not routed back, because fix_nated_contact() does only work with UDP. And Bob builds the R-URI with the Infos of Alice's contact header. The route is as follows: alice(a)atlanta.com [172.16.0.4] -> natbox.atlanta.com [172.16.0.1 | 192.168.0.13] -> sip.atlanta.com [192.168.0.14] -> sip.biloxi.com [192.168.1.14] -> bob(a)biloxi.com [192.168.1.1] Possible solutions: - force_tcp_alias() -> but reading the draft draft-ietf-sip-connect-reuse-04.txt yields that this must be supported by the components - so doesn't the snom360 of Alice - commenting some lines in nathelper.c and activate it for TCP -> this works pretty fine and the BYE finds its way from Bob through the NAT-Box to Alice. But this is a dirty solution. So does anybody has a similar problem? My config works fine with UDP but switching to TCP makes life hard... I attached the traces Bob received, his last BYE is finally dropped by sip.atlanta.com, because the network-address 172.16.0.4 can't be found! Thank you for your help! regards, Philipp ========================================================================= Received from tcp:192.168.1.14:5060 at 15/10/2005 19:18:32:250 (1751 bytes): INVITE sip:bob@192.168.1.1:2063;transport=tcp;line=wxqurd1s SIP/2.0 Record-Route: <sip:192.168.1.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.1.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Via: SIP/2.0/TCP 192.168.1.14;branch=z9hG4bKcad9.057cd815.0;i=d Via: SIP/2.0/TLS 192.168.0.14:5061;branch=z9hG4bKcad9.685be3c3.0;i=1 Via: SIP/2.0/TCP 172.16.0.4:2327;received=192.168.0.13;branch=z9hG4bK-y79imu6dlqxs;rport=2327 From: "Alice" <sip:alice@atlanta.com>;tag=5s8qncdbso To: <sip:bob@biloxi.com> Call-ID: 3c2675cac832-ce5ge5sxlx2q@snom360 CSeq: 1 INVITE Max-Forwards: 68 Contact: <sip:alice@172.16.0.4:2327;transport=tcp;line=fyyuh6tl> P-Key-Flags: resolution="31x13", keys="4" User-Agent: snom360/4.3 Accept: application/sdp Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO Allow-Events: talk, hold, refer Supported: timer, 100rel, replaces, callerid Session-Expires: 3600 Content-Type: application/sdp Content-Length: 507 P-hint: outbound P-hint: forced TLS relay P-hint: usrloc applied Sent to tcp:192.168.1.14:5060 at 15/10/2005 19:18:32:270 (929 bytes): SIP/2.0 180 Ringing Via: SIP/2.0/TCP 192.168.1.14;branch=z9hG4bKcad9.057cd815.0;i=d Via: SIP/2.0/TLS 192.168.0.14:5061;branch=z9hG4bKcad9.685be3c3.0;i=1 Via: SIP/2.0/TCP 172.16.0.4:2327;received=192.168.0.13;branch=z9hG4bK-y79imu6dlqxs;rport=2327 Record-Route: <sip:192.168.1.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.1.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> From: "Alice" <sip:alice@atlanta.com>;tag=5s8qncdbso To: <sip:bob@biloxi.com>;tag=fxdufnc4xz Call-ID: 3c2675cac832-ce5ge5sxlx2q@snom360 CSeq: 1 INVITE Contact: <sip:bob@192.168.1.1:2063;transport=tcp;line=wxqurd1s> Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO Allow-Events: talk, hold, refer Content-Length: 0 Sent to tcp:192.168.1.14:5060 at 15/10/2005 19:18:33:390 (1377 bytes): SIP/2.0 200 Ok Via: SIP/2.0/TCP 192.168.1.14;branch=z9hG4bKcad9.057cd815.0;i=d Via: SIP/2.0/TLS 192.168.0.14:5061;branch=z9hG4bKcad9.685be3c3.0;i=1 Via: SIP/2.0/TCP 172.16.0.4:2327;received=192.168.0.13;branch=z9hG4bK-y79imu6dlqxs;rport=2327 Record-Route: <sip:192.168.1.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.1.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> From: "Alice" <sip:alice@atlanta.com>;tag=5s8qncdbso To: <sip:bob@biloxi.com>;tag=fxdufnc4xz Call-ID: 3c2675cac832-ce5ge5sxlx2q@snom360 CSeq: 1 INVITE Contact: <sip:bob@192.168.1.1:2063;transport=tcp;line=wxqurd1s> Require: timer Session-Expires: 3600;refresher=uac User-Agent: snom360/4.3 Allow: INVITE, ACK, CANCEL, BYE, REFER, OPTIONS, NOTIFY, SUBSCRIBE, PRACK, MESSAGE, INFO Allow-Events: talk, hold, refer Supported: timer, 100rel, replaces, callerid Content-Type: application/sdp Content-Length: 296 ACK sip:bob@192.168.1.1:2063;transport=tcp;line=wxqurd1s SIP/2.0 Record-Route: <sip:192.168.1.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.1.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Record-Route: <sip:192.168.0.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Via: SIP/2.0/TCP 192.168.1.14;branch=0;i=d Via: SIP/2.0/TLS 192.168.0.14:5061;branch=0;i=1 Via: SIP/2.0/TCP 172.16.0.4:2327;received=192.168.0.13;branch=z9hG4bK-o9f1lglhf4pk;rport=2327 From: "Alice" <sip:alice@atlanta.com>;tag=5s8qncdbso To: <sip:bob@biloxi.com>;tag=fxdufnc4xz Call-ID: 3c2675cac832-ce5ge5sxlx2q@snom360 CSeq: 1 ACK Max-Forwards: 68 Contact: <sip:alice@172.16.0.4:2327;transport=tcp;line=fyyuh6tl> Content-Length: 0 P-hint: rr-enforced P-hint: rr-enforced Sent to tcp:192.168.1.14:5060 at 15/10/2005 19:18:34:480 (703 bytes): BYE sip:alice@172.16.0.4:2327;transport=tcp;line=fyyuh6tl SIP/2.0 Via: SIP/2.0/TCP 192.168.1.1:2063;branch=z9hG4bK-gu03sll9uumm;rport Route: <sip:192.168.1.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> Route: <sip:192.168.1.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Route: <sip:192.168.0.14:5061;transport=tls;r2=on;ftag=5s8qncdbso;lr=on> Route: <sip:192.168.0.14;transport=tcp;r2=on;ftag=5s8qncdbso;lr=on> From: <sip:bob@biloxi.com>;tag=fxdufnc4xz To: "Alice" <sip:alice@atlanta.com>;tag=5s8qncdbso Call-ID: 3c2675cac832-ce5ge5sxlx2q@snom360 CSeq: 1 BYE Max-Forwards: 70 Contact: <sip:bob@192.168.1.1:2063;transport=tcp;line=wxqurd1s> User-Agent: snom360/4.3 Content-Length: 0

2 2

[Users] RE: Openser + IVR
by Abdul Lateef 16 Oct '05

16 Oct '05

Hi, I was thinking to try from vm modules, but i am not able from where i can download vm module? I hope using SEMS i can make the ivr proper work. But Please if u have any idea about vm module let me know form where i can download it? -------- Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com __________________________________ Start your day with Yahoo! - Make it your home page! http://www.yahoo.com/r/hs

2 1

[Users] Openser + IVR
by Abdul Lateef 16 Oct '05

16 Oct '05

HI all, Does openser support IVR system? if it is supporting from where i can do the configuration? -------- Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com __________________________________ Yahoo! Mail - PC Magazine Editors' Choice 2005 http://mail.yahoo.com

2 1

[Serusers] round robin routing
by roger leszczynski 16 Oct '05

16 Oct '05

I need a solution that can implement round robin routing.... ive used the gflags module to do this, and it routes my snom phoens two different servers (im using SER as a load balancer) currently just doign a simple redirect server. Here are my problems...phones routed to the same server cannot call each other..... also...when reciveing an incoming call on DID from PSTN.... if the phone registers to one server.... and there are three...how can i have it route to the proper server of where the phone is registered? Finally how would I make calls between servers (they all have the same config) with out going to the PSTN termiantion point and going back in??

1 0

[Serusers] authentication failed when use freeradius to authenticate
by shikun.wang 15 Oct '05

15 Oct '05

hi, I'm using ser-0.9.3+freeradius-0.9.1+radiusclient-ng-0.5.1.When I use "radtest test test localhost 0 testing123" to test the servers,it returns "rad_recv: Access-Reject packet from host 127.0.0.1:1812, id=235, length=45".And the radius prints: rad_recv: Access-Request packet from host 127.0.0.1:34012, id=235, length=56 User-Name = "test" User-Password = "test" NAS-IP-Address = 255.255.255.255 NAS-Port = 0 modcall: entering group authorize modcall[authorize]: module "preprocess" returns ok modcall[authorize]: module "chap" returns noop rlm_eap: EAP-Message not found modcall[authorize]: module "eap" returns noop modcall[authorize]: module "digest" returns noop rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop users: Matched DEFAULT at 152 users: Matched test at 226 modcall[authorize]: module "files" returns ok modcall[authorize]: module "mschap" returns noop modcall: group authorize returns ok rad_check_password: Found Auth-Type Digest auth: type "digest" modcall: entering group authenticate ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid modcall: group authenticate returns invalid auth: Failed to validate the user. Who can give me any instructions?Thank you:)

2 1

Fwd: [Serusers] Multi Media Proxy servers install
by Voipers Portugal 15 Oct '05

15 Oct '05

---------- Forwarded message ---------- From: Voipers Portugal <voipers(a)gmail.com> Date: 15/10/2005 11:55 Subject: Re: [Serusers] Multi Media Proxy servers install To: Leon Sun <leon.sun(a)keywestcommunications.com> Check this website: www.voip-info.org/wiki-DNS+SRV Regards, Jose Simoes 2005/10/11, Leon Sun <leon.sun(a)keywestcommunications.com>: > Hi, > > Just wondering if anyone likes to help(instruction only is fine) me build up > few media proxy servers with pay by hours? > > I have built a mediaproxy with SER in same server and like to add few of > them one by one. I can't figure out how to and to where put those DNS SRV. > > If you like to give me a hand, please let me know. We can talk about charge. > > Regards > > Leon Sun > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] write IP + dst to file
by Tony Baartman 15 Oct '05

15 Oct '05

HI Does anyone know how / if there is a way to write the date, src_ip and dst_called to a file? Thanks in advance

1 0

[Serusers] VoiceMail Module
by Abdul Lateef 15 Oct '05

15 Oct '05

Hi all, I installed ser with SEMS, but i am not able to find the vm.so (voice module) under my /usr/local/lib/ser/modules. Is it third party module, from where i can able to download it? -------- Yours, Abdul Lateef Computer Programmer HATIF COM Mob: +974 - 5405022 Tel: +974 - 4883068 ICQ: 276994704 YM!: abdul_zu Fax: +974 - 4883063 Doha Qatar http://www.hatif.com __________________________________ Yahoo! Music Unlimited Access over 1 million songs. Try it free. http://music.yahoo.com/unlimited/

2 1

[Users] user authentication with certificate
by Girish Nayak 14 Oct '05

14 Oct '05

i understand, minisip softphone can initiate TLS connection. and it can be authenticated by the openser via digest authentication. is it possible to use certificate instead of digest authentication? -- Girish On Fri, 2005-10-14 at 08:28 +0000, users-request(a)openser.org wrote: > Send Users mailing list submissions to > users(a)openser.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://openser.org/cgi-bin/mailman/listinfo/users > or, via email, send a message with subject or body 'help' to > users-request(a)openser.org > > You can reach the person managing the list at > users-owner(a)openser.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Users digest..." > > > Today's Topics: > > 1. Re: Re: [Serusers] trusting peers (Juha Heinanen) > 2. Re: different tables for acc (Klaus Darilion) > 3. Re: Improving TLS implementation (Cesc) > 4. Re: Improving TLS implementation (Juha Heinanen) > 5. Softphones compatible with Openser/TLS (Joonbum Byun) > 6. Re: Softphones compatible with Openser/TLS (Klaus Darilion) > 7. Re: Softphones compatible with Openser/TLS (Cesc) > 8. Re: BYE method accompanied by error (Daniel-Constantin Mierla) > 9. Re: How to do RADIUS authentication with hashed password (MD5 > or HA1)? (Bogdan-Andrei Iancu) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 13 Oct 2005 13:55:37 +0300 > From: Juha Heinanen <jh(a)tutpro.com> > Subject: Re: [Users] Re: [Serusers] trusting peers > To: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Cc: Nils Ohlmeier <lists(a)ohlmeier.org>, serusers(a)iptel.org, Jan Janak > <jan(a)iptel.org>, "users openser.org" <users(a)openser.org> > Message-ID: <17230.15657.441146.200770(a)rautu.tutpro.com> > Content-Type: text/plain; charset=us-ascii > > Klaus Darilion writes: > > > e.g. simmilar to allow_trusted, but using the domain form the > > certificate instead of using src_ip. > > yes, it would be easy to add such a check to permissions module. > > -- juha > > > > ------------------------------ > > Message: 2 > Date: Thu, 13 Oct 2005 14:30:46 +0200 > From: Klaus Darilion <klaus.mailinglists(a)pernau.at> > Subject: Re: [Users] different tables for acc > To: jayesh nambiar <jayesh_1017(a)yahoo.com> > Cc: SER <users(a)openser.org> > Message-ID: <434E5376.2000902(a)pernau.at> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > No. Only one table for all costumers. > > klaus > > jayesh nambiar wrote: > > hi all, > > I came to kno about the parameter modparam("acc", "db_table_acc", > > "acc_table"). > > Does this mean that I can have different acc tables for my different > > type of customers. Is this possible. > > If yes, then how? If i declare the appropriate flag and then use setflag > > at the places i want to account, will it work. > > Can someone please explain it to me. Any suggestions would help me a lot. > > Thanx > > jayesh > > > > ------------------------------------------------------------------------ > > Yahoo! Music Unlimited - Access over 1 million songs. Try it free. > > <http://pa.yahoo.com/*http://us.rd.yahoo.com/evt=36035/*http://music.yahoo.c…> > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > ------------------------------ > > Message: 3 > Date: Thu, 13 Oct 2005 14:53:25 +0200 > From: Cesc <cesc.santa(a)gmail.com> > Subject: Re: [Users] Improving TLS implementation > To: Juha Heinanen <jh(a)tutpro.com> > Cc: SER-Users <serusers(a)iptel.org>, OpenSER-users <users(a)openser.org> > Message-ID: > <ce8208420510130553r371591aeib5f43a7674b109b(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hi Juha, > Well, that is true, but what do you propose then? just present a host cert > and nothing else? I would say that if the company trust the hosting for > running the service, a mere certficate should not be the problem, should it? > Cesc > > On 10/13/05, Juha Heinanen <jh(a)tutpro.com> wrote: > > > > cesc, > > > > you made a good summary, but in multi-domain case, it is not just a > > technical problem on how to present or offer a domain specific > > certificate. in order to be able to do that, the domains have to > > surrender their private keying information to a provider that currently > > happens to host their sip service, and to another provider that hosts > > their web service, and to third provider that hosts their e-commerce > > service, etc. > > > > in most cases, this is simply out of question. companies are not going > > to do it. > > > > -- juha > > >

2 2

[Users] Re: [Serdev] group_radius radius_is_user_in
by Tavis P 14 Oct '05

14 Oct '05

Oops, i spoke too soon It looks like you have placed the "files" module before the "sql" module in your radiusd.conf Its matching your DEFAULT entry in files (setting the Auth-Type to none) but the sql module is later changing the Auth-Type to "digest" Changing the order would solve this problem, as you want it to match the SQL statement first and than the section in the files last (which changes the Auth-Type) Also, you may want to reduce the load on your database by not setting the Auth-Type in the database and instead setting in the users file with a DEFAULT statement as (at least in my case) it isn't somthing that need to be dynamic. lenirsantiago(a)yahoo.com wrote: >Hello list, > >I've been trying my hardest today to get group_radius to work, and its >function radius_is_user_in(). >I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest >authentication. > >Radius authentication works fine. >The problem is that when radius_is_user_in() function gets called, it sends >a radius message but without the User-Password field and freeradius >complains that it requires it since we are using Digest. >I've seen a couple of posts here, but they were never answered: >http://mail.iptel.org/pipermail/serusers/2005-March/017342.html >http://mail.iptel.org/pipermail/serusers/2005-March/017075.html > >----- >I have a small test in my ser.cfg file: > if (!radius_www_authorize("")) { > xlog("L_I","%ci - %fu - User not authenticated, Radius >Authenticating...\n"); > www_challenge("","0"); > break; > } else { > xlog("L_I","%ci - %fu - User authenticated...\n"); > }; > > if (radius_is_user_in("From", "Dialin")){ > xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); > } else { > xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); > }; > > if (radius_is_user_in("Credentials", "Dialin2")){ > xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); > } else { > xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); > }; > >----- >In /etc/raddb/users file I have the following at line 152: >DEFAULT Auth-Type = System > Fall-Through = 1 > >DEFAULT Service-Type == Group-Check, Auth-Type := None > >DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None > >----- > >These are mysql tables: > >+----+----------+-----------+----+----------+ >| id | UserName | Attribute | op | Value | >+----+----------+-----------+----+----------+ >| 1 | Jhassell | Password | == | changeme | >| 2 | Rneis | Password | == | changeme | >| 3 | 1000 | Password | == | 1000 | >| 4 | 2000 | Password | == | 2000 | >| 5 | 3000 | Password | == | 3000 | >| 8 | 1000 | Auth-Type | := | Digest | >+----+----------+-----------+----+----------+ > >+----+-----------+-----------+----+--------+ >| id | GroupName | Attribute | op | Value | >+----+-----------+-----------+----+--------+ >| 6 | Dialin | Auth-Type | := | Accept | >+----+-----------+-----------+----+--------+ > >+----+-----------+---------------+----+----------------------------------+-- >----+ >| id | GroupName | Attribute | op | Value | >prio | >+----+-----------+---------------+----+----------------------------------+-- >----+ >| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >0 | >| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >0 | >+----+-----------+---------------+----+----------------------------------+-- >----+ > >+----+----------+---------------+----+------------------+ >| id | UserName | Attribute | op | Value | >+----+----------+---------------+----+------------------+ >| 1 | 1000 | Reply-Message | = | "Authenticated" | >| 2 | 1000 | Sip-Group | = | Dialin | >| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >+----+----------+---------------+----+------------------+ > >+----+----------+------------+ >| id | UserName | GroupName | >+----+----------+------------+ >| 1 | Jhassell | Dialin | >| 2 | Rneis | Staticdial | >| 3 | 1000 | Dialin | >| 4 | 2000 | Dialin | >| 5 | 3000 | Dialin | >| 6 | 3000 | Dialin2 | >+----+----------+------------+ > >------ > >This is the debug I get from freeradius for the group check: > >rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >length=67 > User-Name = "1000(a)xx.xx.xx.xx" > Sip-Group = "Dialin2" > Service-Type = Group-Check > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 74 > modcall[authorize]: module "preprocess" returns ok for request 74 > modcall[authorize]: module "chap" returns noop for request 74 > modcall[authorize]: module "mschap" returns noop for request 74 > modcall[authorize]: module "digest" returns noop for request 74 > rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >"1000(a)xx.xx.xx.xx" > rlm_realm: Found realm "xx.xx.xx.xx" > rlm_realm: Adding Stripped-User-Name = "1000" > rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx > rlm_realm: Adding Realm = "xx.xx.xx.xx" > rlm_realm: Authentication realm is LOCAL. > modcall[authorize]: module "suffix" returns noop for request 74 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 74 > users: Matched entry DEFAULT at line 152 > users: Matched entry DEFAULT at line 158 > modcall[authorize]: module "files" returns ok for request 74 >radius_xlat: '1000' >rlm_sql (sql): sql_set_user escaped user --> '1000' >rlm_sql (sql): Released sql socket id: 0 > modcall[authorize]: module "sql" returns ok for request 74 >modcall: group authorize returns ok for request 74 > rad_check_password: Found Auth-Type Digest >auth: type "digest" > Processing the authenticate section of radiusd.conf >modcall: entering group authenticate for request 74 >ERROR: No Digest-Nonce: Cannot perform Digest authentication > modcall[authenticate]: module "digest" returns invalid for request 74 >modcall: group authenticate returns invalid for request 74 >auth: Failed to validate the user. >Delaying request 74 for 1 seconds >Finished request 74 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 > Reply-Message = "Authenticated" >Waking up in 4 seconds... >--- Walking the entire request list --- >Cleaning up request 74 ID 15 with timestamp 434f1121 >Nothing to do. Sleeping until we see a request. > > > > > >Any help in this matter would be deeply appreciated, > > > > >Lenir > > > > >_______________________________________________ >Serdev mailing list >Serdev(a)iptel.org >http://mail.iptel.org/mailman/listinfo/serdev > > > >

2 2

[Serusers] NAT-Issue in onsip.org's GettingStarted?
by Andreas Granig 14 Oct '05

14 Oct '05

Hi, While experimenting with the example config nat-mediaproxy.5.0.cfg of onsip.org's GettingStarted document I discovered a problem with NAT handling. Don't blame me if I'm completely wrong, but here is what happens and how it is solved: I've two phones behind the same NAT (address of phone A is a:5060 and that of phone B is b:5060, the NAT device has ip c) contacting a SER with a public IP. If A makes a call, it's NATed to c:5060, SER responds with 407 to c:5060, and it's correctly forwarded to a:5060. If B makes a call, it's NATed to c:1025, but SER responds to c:5060 too, so B never gets the reply. The original config looks like this: 181 # ---------------------------------------------------------- 182 # INVITE Message Handler 183 # ---------------------------------------------------------- 184 185 if (!proxy_authorize("","subscriber")) { 186 proxy_challenge("","0"); 187 break; 188 } else if (!check_from()) { 189 sl_send_reply("403", "Use From=ID"); 190 break; 191 }; 192 193 consume_credentials(); 194 195 if (client_nat_test("3")) { 196 setflag(7); 197 force_rport(); 198 fix_nated_contact(); 199 }; So the autorization is done before NAT is handled, and I think this is the problem. Because if I move the lines 195-199 before 185, everything works as expected. Could anyone please be so kind and check that? Andy

3 3

[Serusers] How to do RADIUS authentication with hashed password (MD5 or HA1)?
by Cheng Zhang 14 Oct '05

14 Oct '05

I have setup SER to authenticate via FreeRADIUS with MSSQL DB. The problem is that the user's password is stored as cleartext in the database. I'd like to know is there a way to make such setup using hashed password (just MD5 or HA1)? In module auth_db, there is a mod parameter 'calculate_ha1' being set to 0 can be used for similiar purpose. But there is no such option for auth_radius. Maybe this is about how to configure FreeRADIUS, but I couldn't dig anything up from FreeRADIUS mailing list archive either.

2 2

[Users] How to do RADIUS authentication with hashed password (MD5 or HA1)?
by Cheng Zhang 14 Oct '05

14 Oct '05

I have setup SER to authenticate via FreeRADIUS with MSSQL DB. The problem is that the user's password is stored as cleartext in the database. I'd like to know is there a way to make such setup using hashed password (just MD5 or HA1)? In module auth_db, there is a mod parameter 'calculate_ha1' being set to 0 can be used for similiar purpose. But there is no such option for auth_radius. Maybe this is about how to configure FreeRADIUS, but I couldn't dig anything up from FreeRADIUS mailing list archive either.

2 4

[Users] extra accounting problem
by jayesh nambiar 14 Oct '05

14 Oct '05

hi all, I want to account src_ips in my acc table. While using openser0.9.5 I used the following modparam syntax: modparam("acc", "db_extra", "src= avp/i:10") and when doing setflag(1), I wrote avp_write() syntax to write src_ip in i:10. But now I am using openser 0.10.x and it gives me an error saying the following: Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: ACC - initializing Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: xl_parse_item: error - bad parameters Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: ERROR:acc:parse_acc_extra: parse failed in <src= avp/i:10> around position 5 Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: acc:parse_acc_extra: error Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: ERROR:acc:mod_init: failed to parse db_extra param Oct 14 12:35:43 localhost /usr/local/sbin/openser[19916]: init_mod(): Error while initializing module acc Could someone pls let me know, if the syntax for adding extra column in acc table has changed. I have a column named "src" in the acc table. thank you. jayesh --------------------------------- Yahoo! Music Unlimited - Access over 1 million songs. Try it free.

2 1

[Serusers] group_radius radius_is_user_in
by lenirsantiago＠yahoo.com 14 Oct '05

14 Oct '05

Hello list, I've been trying my hardest today to get group_radius to work, and its function radius_is_user_in(). I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest authentication. Radius authentication works fine. The problem is that when radius_is_user_in() function gets called, it sends a radius message but without the User-Password field and freeradius complains that it requires it since we are using Digest. I've seen a couple of posts here, but they were never answered: http://lists.iptel.org/pipermail/serusers/2005-March/017342.html http://lists.iptel.org/pipermail/serusers/2005-March/017075.html ----- I have a small test in my ser.cfg file: if (!radius_www_authorize("")) { xlog("L_I","%ci - %fu - User not authenticated, Radius Authenticating...\n"); www_challenge("","0"); break; } else { xlog("L_I","%ci - %fu - User authenticated...\n"); }; if (radius_is_user_in("From", "Dialin")){ xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); }; if (radius_is_user_in("Credentials", "Dialin2")){ xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); }; ----- In /etc/raddb/users file I have the following at line 152: DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Service-Type == Group-Check, Auth-Type := None DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None ----- These are mysql tables: +----+----------+-----------+----+----------+ | id | UserName | Attribute | op | Value | +----+----------+-----------+----+----------+ | 1 | Jhassell | Password | == | changeme | | 2 | Rneis | Password | == | changeme | | 3 | 1000 | Password | == | 1000 | | 4 | 2000 | Password | == | 2000 | | 5 | 3000 | Password | == | 3000 | | 8 | 1000 | Auth-Type | := | Digest | +----+----------+-----------+----+----------+ +----+-----------+-----------+----+--------+ | id | GroupName | Attribute | op | Value | +----+-----------+-----------+----+--------+ | 6 | Dialin | Auth-Type | := | Accept | +----+-----------+-----------+----+--------+ +----+-----------+---------------+----+----------------------------------+-- ----+ | id | GroupName | Attribute | op | Value | prio | +----+-----------+---------------+----+----------------------------------+-- ----+ | 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | 0 | | 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | 0 | +----+-----------+---------------+----+----------------------------------+-- ----+ +----+----------+---------------+----+------------------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+------------------+ | 1 | 1000 | Reply-Message | = | "Authenticated" | | 2 | 1000 | Sip-Group | = | Dialin | | 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | +----+----------+---------------+----+------------------+ +----+----------+------------+ | id | UserName | GroupName | +----+----------+------------+ | 1 | Jhassell | Dialin | | 2 | Rneis | Staticdial | | 3 | 1000 | Dialin | | 4 | 2000 | Dialin | | 5 | 3000 | Dialin | | 6 | 3000 | Dialin2 | +----+----------+------------+ ------ This is the debug I get from freeradius for the group check: rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, length=67 User-Name = "1000(a)xx.xx.xx.xx" Sip-Group = "Dialin2" Service-Type = Group-Check NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 74 modcall[authorize]: module "preprocess" returns ok for request 74 modcall[authorize]: module "chap" returns noop for request 74 modcall[authorize]: module "mschap" returns noop for request 74 modcall[authorize]: module "digest" returns noop for request 74 rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = "1000(a)xx.xx.xx.xx" rlm_realm: Found realm "xx.xx.xx.xx" rlm_realm: Adding Stripped-User-Name = "1000" rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx rlm_realm: Adding Realm = "xx.xx.xx.xx" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 74 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 74 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 158 modcall[authorize]: module "files" returns ok for request 74 radius_xlat: '1000' rlm_sql (sql): sql_set_user escaped user --> '1000' rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns ok for request 74 modcall: group authorize returns ok for request 74 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 74 ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid for request 74 modcall: group authenticate returns invalid for request 74 auth: Failed to validate the user. Delaying request 74 for 1 seconds Finished request 74 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 Reply-Message = "Authenticated" Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 74 ID 15 with timestamp 434f1121 Nothing to do. Sleeping until we see a request. Any help in this matter would be deeply appreciated, Lenir

1 0

[Users] group_radius radius_is_user_in
by lenirsantiago＠yahoo.com 14 Oct '05

14 Oct '05

Hello list, I've been trying my hardest today to get group_radius to work, and its function radius_is_user_in(). I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest authentication. Radius authentication works fine. The problem is that when radius_is_user_in() function gets called, it sends a radius message but without the User-Password field and freeradius complains that it requires it since we are using Digest. I've seen a couple of posts here, but they were never answered: http://mail.iptel.org/pipermail/serusers/2005-March/017342.html http://mail.iptel.org/pipermail/serusers/2005-March/017075.html ----- I have a small test in my ser.cfg file: if (!radius_www_authorize("")) { xlog("L_I","%ci - %fu - User not authenticated, Radius Authenticating...\n"); www_challenge("","0"); break; } else { xlog("L_I","%ci - %fu - User authenticated...\n"); }; if (radius_is_user_in("From", "Dialin")){ xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); }; if (radius_is_user_in("Credentials", "Dialin2")){ xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); }; ----- In /etc/raddb/users file I have the following at line 152: DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Service-Type == Group-Check, Auth-Type := None DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None ----- These are mysql tables: +----+----------+-----------+----+----------+ | id | UserName | Attribute | op | Value | +----+----------+-----------+----+----------+ | 1 | Jhassell | Password | == | changeme | | 2 | Rneis | Password | == | changeme | | 3 | 1000 | Password | == | 1000 | | 4 | 2000 | Password | == | 2000 | | 5 | 3000 | Password | == | 3000 | | 8 | 1000 | Auth-Type | := | Digest | +----+----------+-----------+----+----------+ +----+-----------+-----------+----+--------+ | id | GroupName | Attribute | op | Value | +----+-----------+-----------+----+--------+ | 6 | Dialin | Auth-Type | := | Accept | +----+-----------+-----------+----+--------+ +----+-----------+---------------+----+----------------------------------+-- ----+ | id | GroupName | Attribute | op | Value | prio | +----+-----------+---------------+----+----------------------------------+-- ----+ | 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | 0 | | 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | 0 | +----+-----------+---------------+----+----------------------------------+-- ----+ +----+----------+---------------+----+------------------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+------------------+ | 1 | 1000 | Reply-Message | = | "Authenticated" | | 2 | 1000 | Sip-Group | = | Dialin | | 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | +----+----------+---------------+----+------------------+ +----+----------+------------+ | id | UserName | GroupName | +----+----------+------------+ | 1 | Jhassell | Dialin | | 2 | Rneis | Staticdial | | 3 | 1000 | Dialin | | 4 | 2000 | Dialin | | 5 | 3000 | Dialin | | 6 | 3000 | Dialin2 | +----+----------+------------+ ------ This is the debug I get from freeradius for the group check: rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, length=67 User-Name = "1000(a)xx.xx.xx.xx" Sip-Group = "Dialin2" Service-Type = Group-Check NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 74 modcall[authorize]: module "preprocess" returns ok for request 74 modcall[authorize]: module "chap" returns noop for request 74 modcall[authorize]: module "mschap" returns noop for request 74 modcall[authorize]: module "digest" returns noop for request 74 rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = "1000(a)xx.xx.xx.xx" rlm_realm: Found realm "xx.xx.xx.xx" rlm_realm: Adding Stripped-User-Name = "1000" rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx rlm_realm: Adding Realm = "xx.xx.xx.xx" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 74 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 74 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 158 modcall[authorize]: module "files" returns ok for request 74 radius_xlat: '1000' rlm_sql (sql): sql_set_user escaped user --> '1000' rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns ok for request 74 modcall: group authorize returns ok for request 74 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 74 ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid for request 74 modcall: group authenticate returns invalid for request 74 auth: Failed to validate the user. Delaying request 74 for 1 seconds Finished request 74 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 Reply-Message = "Authenticated" Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 74 ID 15 with timestamp 434f1121 Nothing to do. Sleeping until we see a request. Any help in this matter would be deeply appreciated, Lenir

1 0

RE: [Serusers] trusting peers
by Dmitry Isakbayev 14 Oct '05

14 Oct '05

Hi Klaus, There is another option. A UAC can present an authorization token issued by a trusted Open Settlement Protocol server. If UAS successfully validates the token, it can presume that the client is trusted. The trusted OSP server can use different policies for authenticating the UAC. OSP is an open standard defined by ETSI - the European Telecommunications Standards Institute. It has been widely deployed by VoIP carriers to enforce secure access control for peer to peer inter-domain VoIP routing and Call Detail Record (CDR) collection. The 'osp' module (http://osp-module.berlios.de or http://developer.berlios.de/projects/osp-module) adds support for the OSP to (Open) SER. We are in the process of moving the project to (Open) SER's CVS. Regards, Dmitry > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Klaus Darilion > Sent: Tuesday, October 11, 2005 8:56 AM > To: ser users; users openser.org > Subject: [Serusers] trusting peers > > Hi all! > > I want to differ between _incoming_ SIP requests from trusted > peers and from untrused (for different call routing). I came > to the following solutions. All of them has some > disadvantages, and I would like to now which you would prefer: > > 1. src_ip: incoming request are authenticated using the > src_ip (only in TCP mode useful) > +: easy to implement > +: easy to differ authenticated from unauthenticated incoming calls > -: lots of configuration (IP addresses may change, ) This > can be implemented using if src_ip==... blocks in > openser.cfg, which would require the change the script > everytime the IP addresses are changed. Also requires restart > of the proxy. > > Also from_gw() from lcr module can be used. But this would > interfere with the already used lcr tasks and IP addresses. > Maybe copy/paste the code into a new function called from_peer(). > > 2. IPsec: makes it hard to differ trusted from untrusted > incomig requests in the application. Again verification of > the src_ip would be necessary. > -: requires sharing secrets with each peer > +: works also with TCP and TLS unaware proxies > > 3. TLS with certificates signed by me. Then, if my SIP proxy > only uses my root CA, all authenticated TLS connection must > be from my trusted peers. > +: simple, as long as there is only 1 perring-club to authenticate > +: works with current (open)ser > -: can't use public CA roots > -: requires signing of the public key of the peer > > 4. TLS with public signed certificates. (open)ser would > validate the TLS certificate. But after that, I need some > function like > tls_is_from_trusted() which checks the Subject of the > certificate against a list of trusted peers. > +: can use public signed CA roots > +: allows to use TLS for incoming trusted and incoming untrusted peers > -: need some more tls specific functions in (open)ser > -: certificate costs $$$ > > 5. Digest Auth between proxies > -: uac module is not standard conform (CSeq Problem) > -: requires sharing secrets with each peer > > If I have forgotten some possibilities or made some mistakes > please correct me. > > regards > klaus > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > >

2 1

[Users] OT: please help us make the ENUM number range +43 780 a success
by Klaus Darilion 14 Oct '05

14 Oct '05

Hi all! This is a little bit off topic. But people interested in ENUM are sure interested in this. As some of you maybe already know, Austria has a dedicated ENUM driven number range in place since May 2005: +43 780. Reachability of numbers within this range from the PSTN is good within Austria, but still a patchwork from abroad (as with all new number ranges). It is very hard to debug PSTN connectivity from the receiving end - which is why we are asking you to dedicate a few minutes of time and a phone call. To collect the information we've set up a Wiki page: http://www.voip-info.org/wiki/view/43780 To help us make it better, follow these steps: - take a "conventional" phone line of your choice (PSTN, mobile - the more data points, the better) - call the test number "+43 780 004711" - if you hear the word "ENUM" followed by some elevator music, routing from your telco is ok - perfect! - if it doesn't work, take a note of what happened (announcement, error message, error indication etc.) - leave a note about your success or failure to the wiki page indicated above. If possible, add rate information. - repeat this test for any carrier you have access to. If you detect a failure, and happen to know or work for the telco - please notify the relevant person to fix the problem, it is theirs. We're happy to talk to them if you get us in touch. Thanks for your help - we really appreciate it. Feel free to forward this message to people who might contribute more data points. thanks, Klaus Darilion enum.at

1 0

[Serusers] serweb: DB Error: no such field
by Ronald Wiplinger 14 Oct '05

14 Oct '05

# history |grep "cvs -z3" 568 cvs -z3 checkout sip-server 1004 cvs -z3 -d:pserver:anonymous@cvs.serweb.berlios.de:/cvsroot/serweb co serweb I use cvs! /serweb/user/index.php and login as admin gives me on the tab "my account" DB Error: no such field logout /serweb/admin/index.php and login as admin gives me on the tabs "users" "admin privileges" and "user preferences" DB Error: no such field How to fix that? bye Ronald Wiplinger

2 1

[Serusers] DB.php missing in serweb
by Ronald Wiplinger 14 Oct '05

14 Oct '05

My php-error.log shows now: [client 192.168.250.108] PHP Warning: main(DB.php): failed to open stream: No such file or directory in /usr/local/serweb/html/main_prepend.php on line 38 [client 192.168.250.108] PHP Fatal error: main(): Failed opening required 'DB.php' (include_path='.:') in /usr/local/serweb/html/main_prepend.php on line 38 # locate DB.php /usr/share/php/DB.php Where do I set this? bye Ronald Wiplinger

3 3

[Users] trusting peers
by Klaus Darilion 14 Oct '05

14 Oct '05

Hi all! I want to differ between _incoming_ SIP requests from trusted peers and from untrused (for different call routing). I came to the following solutions. All of them has some disadvantages, and I would like to now which you would prefer: 1. src_ip: incoming request are authenticated using the src_ip (only in TCP mode useful) +: easy to implement +: easy to differ authenticated from unauthenticated incoming calls -: lots of configuration (IP addresses may change, ) This can be implemented using if src_ip==... blocks in openser.cfg, which would require the change the script everytime the IP addresses are changed. Also requires restart of the proxy. Also from_gw() from lcr module can be used. But this would interfere with the already used lcr tasks and IP addresses. Maybe copy/paste the code into a new function called from_peer(). 2. IPsec: makes it hard to differ trusted from untrusted incomig requests in the application. Again verification of the src_ip would be necessary. -: requires sharing secrets with each peer +: works also with TCP and TLS unaware proxies 3. TLS with certificates signed by me. Then, if my SIP proxy only uses my root CA, all authenticated TLS connection must be from my trusted peers. +: simple, as long as there is only 1 perring-club to authenticate +: works with current (open)ser -: can't use public CA roots -: requires signing of the public key of the peer 4. TLS with public signed certificates. (open)ser would validate the TLS certificate. But after that, I need some function like tls_is_from_trusted() which checks the Subject of the certificate against a list of trusted peers. +: can use public signed CA roots +: allows to use TLS for incoming trusted and incoming untrusted peers -: need some more tls specific functions in (open)ser -: certificate costs $$$ 5. Digest Auth between proxies -: uac module is not standard conform (CSeq Problem) -: requires sharing secrets with each peer If I have forgotten some possibilities or made some mistakes please correct me. regards klaus

7 25

[Users] TLS and mutliple domains
by Klaus Darilion 14 Oct '05

14 Oct '05

IMO this article is interesting: http://wiki.cacert.org/wiki/VhostTaskForce regards klaus

1 0

[Serusers] logging of SIP dialog
by Iqbal 14 Oct '05

14 Oct '05

Hi Has anyone come up with a scalable method to log the complete SIP trace of ALL calls, i.e to separate files etc Ngrep is greate for a few, but I want to be able to track all calls, for various purposes Iqbal

10 16

[Serusers] group_radius radius_is_user_in
by lenirsantiago＠yahoo.com 14 Oct '05

14 Oct '05

Hello list, I've been trying my hardest today to get group_radius to work, and its function radius_is_user_in(). I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest authentication. Radius authentication works fine. The problem is that when radius_is_user_in() function gets called, it sends a radius message but without the User-Password field and freeradius complains that it requires it since we are using Digest. I've seen a couple of posts here, but they were never answered: http://lists.iptel.org/pipermail/serusers/2005-March/017342.html http://lists.iptel.org/pipermail/serusers/2005-March/017075.html ----- I have a small test in my ser.cfg file: if (!radius_www_authorize("")) { xlog("L_I","%ci - %fu - User not authenticated, Radius Authenticating...\n"); www_challenge("","0"); break; } else { xlog("L_I","%ci - %fu - User authenticated...\n"); }; if (radius_is_user_in("From", "Dialin")){ xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); }; if (radius_is_user_in("Credentials", "Dialin2")){ xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); }; ----- In /etc/raddb/users file I have the following at line 152: DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Service-Type == Group-Check, Auth-Type := None DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None ----- These are mysql tables: +----+----------+-----------+----+----------+ | id | UserName | Attribute | op | Value | +----+----------+-----------+----+----------+ | 1 | Jhassell | Password | == | changeme | | 2 | Rneis | Password | == | changeme | | 3 | 1000 | Password | == | 1000 | | 4 | 2000 | Password | == | 2000 | | 5 | 3000 | Password | == | 3000 | | 8 | 1000 | Auth-Type | := | Digest | +----+----------+-----------+----+----------+ +----+-----------+-----------+----+--------+ | id | GroupName | Attribute | op | Value | +----+-----------+-----------+----+--------+ | 6 | Dialin | Auth-Type | := | Accept | +----+-----------+-----------+----+--------+ +----+-----------+---------------+----+----------------------------------+-- ----+ | id | GroupName | Attribute | op | Value | prio | +----+-----------+---------------+----+----------------------------------+-- ----+ | 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | 0 | | 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | 0 | +----+-----------+---------------+----+----------------------------------+-- ----+ +----+----------+---------------+----+------------------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+------------------+ | 1 | 1000 | Reply-Message | = | "Authenticated" | | 2 | 1000 | Sip-Group | = | Dialin | | 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | +----+----------+---------------+----+------------------+ +----+----------+------------+ | id | UserName | GroupName | +----+----------+------------+ | 1 | Jhassell | Dialin | | 2 | Rneis | Staticdial | | 3 | 1000 | Dialin | | 4 | 2000 | Dialin | | 5 | 3000 | Dialin | | 6 | 3000 | Dialin2 | +----+----------+------------+ ------ This is the debug I get from freeradius for the group check: rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, length=67 User-Name = "1000(a)xx.xx.xx.xx" Sip-Group = "Dialin2" Service-Type = Group-Check NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 74 modcall[authorize]: module "preprocess" returns ok for request 74 modcall[authorize]: module "chap" returns noop for request 74 modcall[authorize]: module "mschap" returns noop for request 74 modcall[authorize]: module "digest" returns noop for request 74 rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = "1000(a)xx.xx.xx.xx" rlm_realm: Found realm "xx.xx.xx.xx" rlm_realm: Adding Stripped-User-Name = "1000" rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx rlm_realm: Adding Realm = "xx.xx.xx.xx" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 74 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 74 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 158 modcall[authorize]: module "files" returns ok for request 74 radius_xlat: '1000' rlm_sql (sql): sql_set_user escaped user --> '1000' rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns ok for request 74 modcall: group authorize returns ok for request 74 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 74 ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid for request 74 modcall: group authenticate returns invalid for request 74 auth: Failed to validate the user. Delaying request 74 for 1 seconds Finished request 74 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 Reply-Message = "Authenticated" Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 74 ID 15 with timestamp 434f1121 Nothing to do. Sleeping until we see a request. Any help in this matter would be deeply appreciated, Lenir

1 0

[Serusers] group_radius radius_is_user_in
by Lenir Santiago 14 Oct '05

14 Oct '05

Hello list, I've been trying my hardest today to get group_radius to work, and its function radius_is_user_in(). I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and digest authentication. Radius authentication works fine. The problem is that when radius_is_user_in() function gets called, it sends a radius message but without the User-Password field and freeradius complains that it requires it since we are using Digest. I've seen a couple of posts here, but they were never answered: http://lists.iptel.org/pipermail/serusers/2005-March/017342.html http://lists.iptel.org/pipermail/serusers/2005-March/017075.html ----- I have a small test in my ser.cfg file: if (!radius_www_authorize("")) { xlog("L_I","%ci - %fu - User not authenticated, Radius Authenticating...\n"); www_challenge("","0"); break; } else { xlog("L_I","%ci - %fu - User authenticated...\n"); }; if (radius_is_user_in("From", "Dialin")){ xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); }; if (radius_is_user_in("Credentials", "Dialin2")){ xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); } else { xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); }; ----- In /etc/raddb/users file I have the following at line 152: DEFAULT Auth-Type = System Fall-Through = 1 DEFAULT Service-Type == Group-Check, Auth-Type := None DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None ----- These are mysql tables: +----+----------+-----------+----+----------+ | id | UserName | Attribute | op | Value | +----+----------+-----------+----+----------+ | 1 | Jhassell | Password | == | changeme | | 2 | Rneis | Password | == | changeme | | 3 | 1000 | Password | == | 1000 | | 4 | 2000 | Password | == | 2000 | | 5 | 3000 | Password | == | 3000 | | 8 | 1000 | Auth-Type | := | Digest | +----+----------+-----------+----+----------+ +----+-----------+-----------+----+--------+ | id | GroupName | Attribute | op | Value | +----+-----------+-----------+----+--------+ | 6 | Dialin | Auth-Type | := | Accept | +----+-----------+-----------+----+--------+ +----+-----------+---------------+----+----------------------------------+-- ----+ | id | GroupName | Attribute | op | Value | prio | +----+-----------+---------------+----+----------------------------------+-- ----+ | 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | 0 | | 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | 0 | +----+-----------+---------------+----+----------------------------------+-- ----+ +----+----------+---------------+----+------------------+ | id | UserName | Attribute | op | Value | +----+----------+---------------+----+------------------+ | 1 | 1000 | Reply-Message | = | "Authenticated" | | 2 | 1000 | Sip-Group | = | Dialin | | 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | +----+----------+---------------+----+------------------+ +----+----------+------------+ | id | UserName | GroupName | +----+----------+------------+ | 1 | Jhassell | Dialin | | 2 | Rneis | Staticdial | | 3 | 1000 | Dialin | | 4 | 2000 | Dialin | | 5 | 3000 | Dialin | | 6 | 3000 | Dialin2 | +----+----------+------------+ ------ This is the debug I get from freeradius for the group check: rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, length=67 User-Name = "1000(a)xx.xx.xx.xx" Sip-Group = "Dialin2" Service-Type = Group-Check NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 74 modcall[authorize]: module "preprocess" returns ok for request 74 modcall[authorize]: module "chap" returns noop for request 74 modcall[authorize]: module "mschap" returns noop for request 74 modcall[authorize]: module "digest" returns noop for request 74 rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = "1000(a)xx.xx.xx.xx" rlm_realm: Found realm "xx.xx.xx.xx" rlm_realm: Adding Stripped-User-Name = "1000" rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx rlm_realm: Adding Realm = "xx.xx.xx.xx" rlm_realm: Authentication realm is LOCAL. modcall[authorize]: module "suffix" returns noop for request 74 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 74 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 158 modcall[authorize]: module "files" returns ok for request 74 radius_xlat: '1000' rlm_sql (sql): sql_set_user escaped user --> '1000' rlm_sql (sql): Released sql socket id: 0 modcall[authorize]: module "sql" returns ok for request 74 modcall: group authorize returns ok for request 74 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 74 ERROR: No Digest-Nonce: Cannot perform Digest authentication modcall[authenticate]: module "digest" returns invalid for request 74 modcall: group authenticate returns invalid for request 74 auth: Failed to validate the user. Delaying request 74 for 1 seconds Finished request 74 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 Reply-Message = "Authenticated" Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 74 ID 15 with timestamp 434f1121 Nothing to do. Sleeping until we see a request. Any help in this matter would be deeply appreciated, Lenir

1 0

[Users] Softphones compatible with Openser/TLS
by Joonbum Byun 13 Oct '05

13 Oct '05

Hi; I'd like to set up a SIP network secured by TLS in my lab. Would anyone please let me know if open source soft-phone is available compatible with TLS enabled Openser? Any suggestions on soft-phones or success stories are greatly appreciated. Thanks, Joon

3 2

[Serusers] Alias still in memory and database after remove
by Downing, David 13 Oct '05

13 Oct '05

Hello, I'm writing a custom program using the serctl interface to manage users (adds, deletes, etc.). One problem that I am having is with the case where I want to reassign an alias to a different user. My assumption was that the command: %serctl alias rm <aliasX> would delete any references to "aliasX" and allow me to reuse "aliasX" for a different user. What I've found is that even after using the aforementioned command, "aliasX" is still in ser's memory cache and in the database's alias table. Thus, if I attempt to reassign this number, it fails. I'm sure I'm not the first to try reassigning extensions through serctl, so either it is broken or I do not understand what is really going on (likely). Any and all help is greatly appreciated. Thanks.

1 0

[Serusers] How to Tell if a SER Child is Blocked
by Andres 13 Oct '05

13 Oct '05

Is there any way to tell if a SER Child is Blocked? Any debug command or log message available? Thanks, -- Andres Network Admin http://www.telesip.net

2 2

[Serusers] Problems with REGISTER
by Ravic Costa 13 Oct '05

13 Oct '05

hi again, I'm having another problem. I can already run ser-0.9.0, but there is a problem when a client tries to register. I edit the method REGISTER so that all the requests could be accepted: if (method=="REGISTER") { log(1, "LOG: Someone registred\n"); if (!save("location")) { sl_reply_error(); }; break; }; However, with the method, if (method=="REGISTER" && nat_uac_test("3")) { fix_nated_contact(); log(1, "LOG: Someone registred\n"); force_rport(); setflag(2); }; the login failed and i got the following errors: 4(6453) qm_free: freeing frag. 0x81588c4 alloc'ed from parser/msg_parser.c: parse_headers(278) 4(6453) qm_free(0x810bba0, 0x815f428), called from receive.c: receive_msg(234) 4(6453) qm_free: freeing frag. 0x815f410 alloc'ed from receive.c: receive_msg(92) 6(6462) qm_malloc(0x810bba0, 8) called from nathelper.c: timer(1539) 6(6462) qm_malloc(0x810bba0, 8) returns address 0x815cf98 frag. 0x815cf80 (size=8) on 1 -th hit 6(6462) qm_free(0x810bba0, 0x815cf98), called from nathelper.c: timer(1594) 6(6462) qm_free: freeing frag. 0x815cf80 alloc'ed from nathelper.c: timer(1539) 3(6452) udp_rcv_loop: probing packet received from 213.22.190.48 50195 6(6462) qm_malloc(0x810bba0, 8) called from nathelper.c: timer(1539) 6(6462) qm_malloc(0x810bba0, 8) returns address 0x815cf98 frag. 0x815cf80 (size=8) on 1 -th hit 6(6462) qm_free(0x810bba0, 0x815cf98), called from nathelper.c: timer(1594) 6(6462) qm_free: freeing frag. 0x815cf80 alloc'ed from nathelper.c: timer(1539) 6(6462) qm_malloc(0x810bba0, 8) called from nathelper.c: timer(1539) 6(6462) qm_malloc(0x810bba0, 8) returns address 0x815cf98 frag. 0x815cf80 (size=8) on 1 -th hit 6(6462) qm_free(0x810bba0, 0x815cf98), called from nathelper.c: timer(1594) 6(6462) qm_free: freeing frag. 0x815cf80 alloc'ed from nathelper.c: timer(1539) 5(6461) udp_rcv_loop: probing packet received from 213.22.190.48 50195 Does anyone know what could be the problem? Best regards, Ravic Costa

1 0

[Serusers] how to make a call with ser
by fishman7788 13 Oct '05

13 Oct '05

hi,I'm new to ser,afer working several days could't figure out how to set up the call.hope get help here. below is how i setup ser rpm -i ser-0.8.12-0.i386.rpm /etc/rc.d/init.d/ser start and after use serctl ps can see ser runing,I use my softphone to make a dial on the pc side,and the ser side using serctl moni can receive 404 reply at server.And right now I can add users by serctl add. So how to make a realy call without authentication,do i need install mysql?and do I need to add user?

2 1

[Serusers] REFER inquiry
by Jason Mohler 13 Oct '05

13 Oct '05

Can someone please help me with REFER? I have a caller that calls in over my SER and then ACKs a calls and when he tries to REFER I send him the 202 but I never send him the NOTIFY. Can someone please help me understand if I am supposed to send the NOTIFY right after the 202? I send hima final NOTIFY when the call is over but not directly after my 202.

1 0

[Serusers] serweb - Access denied
by Ronald Wiplinger 13 Oct '05

13 Oct '05

(new machine, new installation of Openser and serweb) I use serweb-0.9.3.tgz and Openser cvs version. I have not changed any password, just installed as it is. serweb is at /usr/local/serweb httpd.conf includes the line: Alias /serweb "/usr/local/serweb/html" The apache error.log includes: [Fri Oct 14 00:45:58 2005] [error] [client 192.168.250.108] client denied by server configuration: /usr/local/serweb/html 755 is the permission for /usr/local/serweb and below Since a test file in the directory /usr/local/serweb/test.html shows the same error, I am sure it is an apache 2.0 configuration error. What do I miss? bye Ronald Wiplinger

1 0

[Serusers] Can´t make SIP calls between users
by Voipers Portugal 13 Oct '05

13 Oct '05

Hi (sorry for second posting), I have my SER working when i try to talk to other SIP servers. However, i cannot make calls inside my own network. I am using LDAP to authenticate my users, and I have sipldap script that circulates in the web. Everything works fine until there, i get the following output when the user exists: sip:username@host isn´t this what was supposed to happen? When i then try to (!lookup("location")) { if (!exec_dset("/etc/ser/sipldap")) { sl_send_reply("404", "Not Found"); break; } else { log(1," sipldap call"); }; }; #!lookup I get the Not Found message. But if i call the following way: username@username_IP the call works fine.. any ideia? Jose Simoes

1 0

[Serusers] error running ser-0.9.0
by Ravic Costa 13 Oct '05

13 Oct '05

hi, I'm using ser-0.9.0 with Postgres, and i'm working on a virtual machine that have a Fedora Core 3 distribuition installed. I have a problem when I try to run ser. The error is: 8(16991) 1147. N address=0x8160a18 frag=0x8160a00 size=8196 used=1 8(16991) alloc'd from xlog.c: mod_init(98) 8(16991) start check=f0f0f0f0, end check= c0c0c0c0, abcdefed 8(16991) dumping free list stats : 8(16991) hash= 32. fragments no.: 72, unused: 0 bucket size: 128 - 128 (first 128) 8(16991) hash= 1456. fragments no.: 1, unused: 0 bucket size: 5824 - 5824 (first 5824) 8(16991) hash= 4102. fragments no.: 1, unused: 0 bucket size: 524288 - 1048576 (first 692540) 8(16991) ----------------------------- 0(16847) BUG: qm_free: freeing already freed pointer, first free: hash.c: free_hash_table(64) - aborting Thanks, Ravic

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users