- sr-users - kamailio.org

[Serusers] forking with SER
by davor jovanovic 10 Aug '05

10 Aug '05

Hi all, I have a question about routing a call to GW when user isn't in location table. If I have a user with SIP address: sip:mister@no.com, and his alias in form of his business phone on office PBX: alias = 1234 can SER use number in aliases and rewrite sip:mister@no.com to <mailto:1234@no.com> 1234(a)no.com? sip:mister@no.com -> "404 Not Found" -> use aliases -> sip:1234@no.com -> t_relay -> GW -> PBX or something like that. So if someone could explain me how can I do this. Do I need some external application to do that and return PSTN number to SER? Or how can I do forking with SER? thanks

3 5

[Serusers] looping through SER-Asterisk
by Victor Alvarez 10 Aug '05

10 Aug '05

Hi, Trying to do the following: pstn->SER->asterisk (call forward)->SER->Pstn The far end rings but when you answer the call, I get an error in Asterisk: "Got SIP response 481 "Invalid CSeq Number" back from XXX.XX.XX.XX (SER). I have tried the same using two SER machines with the same result, but if I change the scenery to pstn->SER->asterisk (call forward) -> asterisk-> Pstn, it works fine! What could be wrong here? Does anybody implemented the scenery explained above? Could anybody give me a clue? Thanks a lot. Regards, Victor.

2 2

[Serusers] CallId: 0094f942e99f-zmnf5ytp1ngc@snomSoft
by fedora＠voice.dyndns.tv 10 Aug '05

10 Aug '05

Date and time Username Source Destination Method Status 1 2005-08-10 05:45:42 CallId: 0094f942e99f-zmnf5ytp1ngc@snomSoft 1000 <sip:1000@voice.dyndns.tv:5062> sip:8000@221.186.150.68:3852 "8000" <sip:8000@voice.dyndns.tv:5062> sip:8000@221.186.150.68:3852 BYE Ok (200) 2 2005-08-10 05:43:52 CallId: 0094f942e99f-zmnf5ytp1ngc@snomSoft 8000 "8000" <sip:8000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 <sip:1000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 INVITE Ok (200) 3 2005-08-10 05:43:52 CallId: 0094f942e99f-zmnf5ytp1ngc@snomSoft 8000 "8000" <sip:8000@voice.dyndns.tv:5062> sip:1000@221.186.150.67:5062 <sip:1000@voice.dyndns.tv:5062> sip:1000@221.186.150.67:5062 ACK 4 2005-08-10 05:43:52 CallId: 0094f942e99f-xzxrtdd5xb03@snomSoft 8000 <sip:8000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 <sip:1000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 SUBSCRIBE Ok (200) 5 2005-08-10 05:43:51 CallId: 0094f942e99f-xzxrtdd5xb03@snomSoft 8000 <sip:8000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 <sip:1000@voice.dyndns.tv:5062> sip:1000@voice.dyndns.tv:5062 SUBSCRIBE Ok (200) 6 2005-08-10 05:42:28 CallId: 3493f9426ce8-n0nujrl64fac@snomSoft 1234 <sip:1234@voice.dyndns.tv:5062> sip:8000@221.186.150.68:3852 "8000" <sip:8000@voice.dyndns.tv:5062> sip:8000@221.186.150.68:3852 BYE Ok (200)

2 1

[Users] mediaproxy problem
by jayesh nambiar 10 Aug '05

10 Aug '05

hi, I did admin the other SER and that works. Thanx. Now if the request is for foreign calls I send the request from my OPENSER to a foreign SER . That SER does trust me through the source IP. We buy pstn minutes from them. Now the calls are possible when the users are with public IP and also behind NAT. But when the call is for the Cisco phone that is to be handled by the Foriegn SER it does not get established neither the rtp sesions gets established between my SER and the end called party. Can u pls suggest a particular way to handle such calls. Can u pls suggest wat might b the problem. Thanx a lot My configuration is: debug=3 fork=yes log_stderror=no listen=203.XXX.64.XX # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://openser:openserrw@localhost/openser" loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/permissions.so" loadmodule "/usr/local/lib/openser/modules/acc.so" modparam("auth_db|permissions|uri_db|usrloc|acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-asymmetric-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-asymmetric-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 27) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "db_flag", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("203.XXX.64.XX:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if (has_totag() && (method=="INVITE" || method=="ACK")) { if (client_nat_test("3")||search("^Route:.*;nat=yes")){ setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(5); route(1); break; }; if (uri==myself) { if (method=="ACK") { route(6); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(5); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("my_domain","subscriber")) { www_challenge("my_domain","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # CANCEL and INVITE Message Handler # ----------------------------------------------------------------- setflag(1); if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (method=="INVITE" && !allow_trusted()) { if (!proxy_authorize("my_domain","subscriber")) { proxy_challenge("my_domain","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; lookup("aliases"); if (uri!=myself) { route(5); route(1); break; }; if (uri=~"^sip:011[0-9]*@") { # International PSTN route(4); break; }; if (!lookup("location")) { if (uri=~"^sip:[0-9]{10}@") { # Domestic PSTN route(4); break; }; sl_send_reply("404", "User Not Found"); break; }; if (method=="CANCEL") { route(1); break; }; route(5); route(1); } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- #rewritehost("66.XXX.11.XX"); # INSERT YOUR PSTN GATEWAY IP ADDRESS avp_write("i:45", "inv_timeout"); route(5); route(1); } route[5] { # ----------------------------------------------------------------- # RTP Proxy Enabler # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { use_media_proxy(); }; } route[6] { # ------------------------------------------------------------------------ # ACK Handler # ------------------------------------------------------------------------ # ------------------------------------------------------------------------ # Aliases Section # ------------------------------------------------------------------------ lookup("aliases"); if (uri!=myself) { route(5); route(1); break; }; lookup("location"); route(1); } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:\ +0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } --------------------------------- Start your day with Yahoo! - make it your home page

1 0

[Serusers] register pass through in ser
by jeff kwong 10 Aug '05

10 Aug '05

Hi! Is there a way for ser to recieve register message and then pass it to another provider but the ser machine will do the rtp proxying?That is all media packets will be relayed to ser to the user agents. UA---NAT---SER----ANOTHER SS Thanks! _Jeff

1 0

[Serusers] question about multiple SER server register.
by ZHANG, YI2 -HCHBJ 10 Aug '05

10 Aug '05

Can SER server cascaded connected? That's to say. There a centeralized SER registrar server. below top layer, there are serval subordinate SER registrar server which must be registered on that centeralized registrar server. In this case, how to configure those subordinate SER registrar servers to register onto that server?how to send "REGISTER" message onto center server?

1 0

[Serusers] DB error in SER
by Salony Agrawal 09 Aug '05

09 Aug '05

All, I am trying to connect to the database and write the enteries of a field in a file but when trying to bind to the database I am getting the following error. /tmp/ccgppbh8.o(.text+0x28): In function `main': : undefined reference to `bind_dbmod' The code is written within the PA module #include <stdio.h> #include <stdlib.h> #include "../../db/db.h" #define DB_URL "mysql://user:pass@127.0.0.1:3306/dbname" int main() { FILE *fp; db_con_t* h; db_res_t* res; db_func_t* dbf; if (bind_dbmod(DB_URL, dbf)) { printf("Error while binding database module, did you forget to load a database module ?\n"); return -1; } Please let me know. Any help will be highly appreciated. Thanks, Salony "...Live a good, honorable life. Then, when you get older and think back, you'll be able to enjoy it a second time."

1 0

[Serusers] URGENT:No Audio with mediaproxy
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, I m using mediaproxy for nat raversal and rtp handling. Nat is working fine. Clients behind the nat are connected after ringing, but no audo transmission takes place in either side. On running the sessions.py of mediaproxy, the output is as following, [root@sip ser]# python /usr/local/mediaproxy/sessions.py Caller Via Called Status Duration Codec Type Traffic ---------------------------------------------------------------------------- --------------------------- 61.16.236.34:24742 - 66.114.236.182:35012 - ?.?.?.?:? inactive 0'12" G711u Audio 19.42k/704/480 Total traffic: 0bps/0bps/0bps (in1/in2/out) Session count: 1 Proxy version: 1.4.2 --------------- Why is the Called filed showing a ?.?.?.? even though the client is fully resolved. Please help urgent!!! Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

1 0

Re: [Serusers] serctl start|stop|restart
by seehoe yee 09 Aug '05

09 Aug '05

----- Original Message ----- From: "Marc Khayat" <marc(a)globalcarrier.net> Date: Tuesday, August 9, 2005 9:00 pm Subject: [Serusers] serctl start|stop|restart > Hi all, > The first few times I do START STOP or RESTART, everything works fine. > But after that, it gives the following: > [root@linux ~]# serctl stop > Stopping SER : /usr/local/sbin/serctl: line 614: kill: (8771) - No > suchprocess > stopped > [root@linux ~]# > [root@linux ~]# serctl start > > Starting SER : PID file exists! (/var/run/ser.pid) already running? > [root@linux ~]# > [root@linux ~]# serctl restart > Stopping SER : /usr/local/sbin/serctl: line 627: kill: (8771) - No > suchprocess > stopped > Starting SER : PID file exists! (/var/run/ser.pid) already running? > > How can I solve it? > I've encounter this issue before, my previous encounter was caused by misconfiguration in 'ser.cfg'. I can't remember what was my configuration. If you have made any changes recently to ser.cfg. It could be the cause. To stop ser, kill /var/run/ser.pid then start again. seehoe

2 2

[Serusers] MEdiaproxy unable to resolve private IP to public IP
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, I m using ser-0.9.0 with mediaproxy, non natted clients can talk fine, but natted clients addresses are not resolved to public addresses.Also, the culprit I suppose is a function fix_nated_register() used in the ser.cfg which was not recognized by ser. The relevant code from ser.cfg is as follows: ... ... # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:\ +\*") && client_nat_test("7")) { setflag(6); # I commented the following line since it was not recognized by ser # fix_nated_register(); force_rport(); }; ... ... Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

1 0

[Serusers] SNOM registered, but doesnt ring
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, One of my client hardphone, which is a snom ip phone, is registered to the sip server. But when one calls the phone, one gets only a trying message and snom doesnt ring.On running the serctl ul show , the address of record for the snom phone is as follows. ---------------------------------------------- ...Record(0xb5583828)... domain: 'location' aor : 'ddempsay' ~~~Contact(0xb5585738)~~~ domain : 'location' aor : 'ddempsay' Contact : 'sip:therock@90.0.0.27:5060;line=71potf0e' Expires : 3523 q : 1 Call-ID : '3c464f84e016-mf5f9tl4bp70@90-0-0-27' CSeq : 2882 User-Agent: 'snom200-3.56y' received : '' State : CS_NEW Flags : 0 next : (nil) prev : (nil) ~~~/Contact~~~~ ---------------------------------------------- Where does the extra ;line=71potf0e' in the contact field come from. IS the problem created because of this line. Moreover, I dont think it follows the proper SIP URI format. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

[Serusers] 200 ok without contact header field
by Francisco Talavera 09 Aug '05

09 Aug '05

Hello, I had some problems with this scenario. UA SER --------------------------------Register----------------------------> <-------------------------200 ok without contact------------- The 200 ok response doesnt have the contact header field. And my UA needs this header field. I dont want to use save(location) function. Is there some function that adds the contact header in the response? Ing. Francisco Talavera Email: francisco.talavera(a)conexiongroup.com Conexión S.A. Asunción, Paraguay

2 2

[Serusers] starting and stopping ser
by Hemant Patel (IP) 09 Aug '05

09 Aug '05

3 2

[Users] acc module comments
by Klaus Darilion 09 Aug '05

09 Aug '05

Hi! If acc module was compile with SQL/Radius support, it is not possible to deactivate it. IMO this is not a good design, as switching from radius to sql accouting requires re-compilation of the acc module. It would be nice to deactivate the sql support for example by setting db_url to "" if the module was compiled with sql support. btw: is there a bugtracker to track such feature request or bug reports? is the bugtracker on sourceforge used? regards, klaus

2 2

[Serusers] 0.9.3 stable + uac from CVS
by Martin Anderberg 09 Aug '05

09 Aug '05

Hi there! I'm having some trouble with 0.9.3 and the uac-module. I've backported the module according to what is described in doc/parse_headers.txt and also patched using modules/uac/doc/replace_from.patch. The source is the one that's on the current CVS. The binaries are created ok and everything seems ok, however when trying to just alter the displayname with uac_replace_from("Anonymous","") the result is as follows: From: "Anonymous" <>;tag=CA1122244945309503;vsf=c2lwOjA0NjU5MDEwMDBAcHJveHkyLmRpZ2lzaXAubmV0. So it seems that instead of just leaving the URI alone the module replaces it. Is this a known problem? Thanks in advance. /M

1 0

[Serusers] Billing
by Marc Khayat 09 Aug '05

09 Aug '05

Hi all, Concerning billing, I've got the logs saved in a MySQL database and a syslog server. However, I need some kind of a billing server. Is there any "free" billing software that I can use and that can give me a web interface so that I can view every customer's logs...? Thanks, Marc

1 0

[Serusers] mysql - connection not found in the pool
by Hemant Patel (IP) 09 Aug '05

09 Aug '05

1 0

[Serusers] Problem with Unix Socket!
by Francisco Talavera 09 Aug '05

09 Aug '05

Hello, I am trying to do a force drop, using an external program. This program sends a BYE to the UA, via Unix Socket (ser.sock). The Bye looks like this: :t_uac_dlg:jm BYE sip:30003035@192.168.10.100:5060;user=phone . From: <sip:30003060@192.168.10.79;user=phone>;tag=357a0541b4a6fc93 To: <sip:30003035@192.168.10.79;user=phone>;tag=8e1f14f59d2c1f9d Cseq: 1243 BYE Call-ID: 64c75c67f1c0c450(a)192.168.10.115 . . This works fine!.. But I don't receive the response of a BYE in "jm" Unix socket. After I send the Bye, I create the "jm" Unix Socket. Next I send the BYE. And then I read the "jm" socket, but don't receive nothing. I have this error 5(6782) ERROR: tsend_dgram: failed to send: (22) Invalid argument ------------------------------------------------- My ser.cfg looks like debug=5 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=192.168.10.79 unix_sock = "/tmp/ser.sock" unix_sock_children = 1 unix_tx_timeout = 2000 In my ser debug I receive this 2(6779) parse_headers: flags=ffffffffffffffff 2(6779) check_via_address(192.168.10.100, 192.168.10.100, 0) 2(6779) DEBUG:destroy_avp_list: destroying list (nil) 2(6779) receive_msg: cleaning up 1(6778) get_method: method: 'BYE' 1(6778) get_ruri: 'sip:30003035@192.168.10.100:5060;user=phone' 1(6778) get_nexthop: next hop empty 1(6778) get_headers: From: <sip:30003060@192.168.10.79;user=phone>;tag=357a0541b4a6fc93 To: <sip:30003035@192.168.10.79;user=phone>;tag=8e1f14f59d2c1f9d Cseq: 1243 BYE Call-ID: 64c75c67f1c0c450(a)192.168.10.115 1(6778) parse_headers: flags=ffffffffffffffff 1(6778) DEBUG: add_param: tag=8e1f14f59d2c1f9d 1(6778) end of header reached, state=29 1(6778) DEBUG: get_hdr_field: <To> [62]; uri=[sip:30003035@192.168.10.79;user=phone] 1(6778) DEBUG: to body [<sip:30003035@192.168.10.79;user=phone>] 1(6778) get_hdr_field: cseq <Cseq>: <1243> <BYE> 1(6778) get_body_lines: 1(6778) DEBUG: add_param: tag=357a0541b4a6fc93 1(6778) end of header reached, state=29 1(6778) DEBUG:tm:t_uac: next_hop=<sip:30003035@192.168.10.100:5060;user=phone> 1(6778) DEBUG: mk_proxy: doing DNS lookup... 1(6778) DEBUG:destroy_avp_list: destroying list (nil) 1(6778) DEBUG: dlg2hash: 38378 1(6778) DEBUG: add_to_tail_of_timer[4]: 0xbd6aa390 1(6778) DEBUG: add_to_tail_of_timer[0]: 0xbd6aa3a0 5(6782) SIP Reply (status): 5(6782) version: <SIP/2.0> 5(6782) status: <481> 5(6782) reason: <No Such Call> 5(6782) parse_headers: flags=2 5(6782) Found param type 232, <branch> = <z9hG4bKae59.cab8b187.0>; state=16 5(6782) end of header reached, state=5 5(6782) parse_headers: Via found, flags=2 5(6782) parse_headers: this is the first via 5(6782) After parse_msg... 5(6782) forward_reply: found module tm, passing reply to it 5(6782) DEBUG: t_check: msg id=5 global id=0 T start=0xffffffff 5(6782) parse_headers: flags=22 5(6782) DEBUG: add_param: tag=8e1f14f59d2c1f9d 5(6782) end of header reached, state=29 5(6782) DEBUG: get_hdr_field: <To> [62]; uri=[sip:30003035@192.168.10.79;user=phone] 5(6782) DEBUG: to body [<sip:30003035@192.168.10.79;user=phone>] 5(6782) get_hdr_field: cseq <CSeq>: <1243> <BYE> 5(6782) DEBUG: t_reply_matching: hash 38378 label 2015071148 branch 0 5(6782) DEBUG: t_reply_matching: reply matched (T=0xbd6aa278)! 5(6782) DEBUG: t_check: msg id=5 global id=5 T end=0xbd6aa278 5(6782) DEBUG: reply_received: org. status uas=0, uac[0]=0 local=2 is_invite=0) 5(6782) ->>>>>>>>> T_code=0, new_code=481 5(6782) Warning: run_failure_handlers: no UAC support (0, 256) 5(6782) DEBUG: local_reply: branch=0, save=0, winner=0 5(6782) DEBUG: local transaction completed 5(6782) DBG: trans=0xbd6aa278, callback type 256, id 0 entered 5(6782) ERROR: tsend_dgram: failed to send: (22) Invalid argument 5(6782) DEBUG: cleanup_uac_timers: RETR/FR timers reset 5(6782) DEBUG: add_to_tail_of_timer[2]: 0xbd6aa2c0 5(6782) DEBUG:destroy_avp_list: destroying list (nil) 5(6782) receive_msg: cleaning up Thanks in advance Ing. Francisco Talavera

1 0

[Serusers] Postgres
by Sebastian Kühner 09 Aug '05

09 Aug '05

Hi! I have ser running with the postgres module. When I make a ps -el, there are many "postmaster" entries. My questions: 1.) Is that normal? 2.) I have max_connections=250 in my postgres configuration file. The more users are connected to my ser, the more connections do I need? ... or ser only "needs" this connections on startup? Many thanks for your help!! Sebastian

2 2

[Serusers] Stopping and restarting Ser
by Hemant Patel (IP) 09 Aug '05

09 Aug '05

1 0

[Users] Force MediaProxy only in PSTN GW
by Ozan Blotter 09 Aug '05

09 Aug '05

Dear List, I'm deleted many things in OpenSER and reconfigured it : * clients behind ADSL Routers so NATted clients, since we apply for forwarding for port 5060 in each modem, they can register with SER and they can talk with each others, voice traffic does not pass through OpenSER which is good and preferred :) * i have already set up mediaproxy but stopped it to make this experiment with OpenSER, but i will start it again for case : If a client needs to call PSTN, the voice should go from client to OpenSER (no MediaProxy) and from OpenSER to PSTN (MediaProxy) Is it possible to force SER to use MediaProxy just for case of PSTN calls simply ? Thanks, Ozan

2 1

[Users] hello!!
by jayesh nambiar 09 Aug '05

09 Aug '05

hi I got a problem. I am a registered user of one SER and i want to make a call to the registered user of another SER. That SER trusts my IP address. Both are behind NAT. But i get a error of inauthorised user from the other server. Can u pls help me establish this call. I kno I will need mediaproxy but RTP sessions does'nt get active. pls help me. Thanx, jayesh --------------------------------- Start your day with Yahoo! - make it your home page

2 1

[Serusers] serctl start|stop|restart
by Marc Khayat 09 Aug '05

09 Aug '05

Hi all, The first few times I do START STOP or RESTART, everything works fine. But after that, it gives the following: [root@linux ~]# serctl stop Stopping SER : /usr/local/sbin/serctl: line 614: kill: (8771) - No such process stopped [root@linux ~]# [root@linux ~]# serctl start Starting SER : PID file exists! (/var/run/ser.pid) already running? [root@linux ~]# [root@linux ~]# serctl restart Stopping SER : /usr/local/sbin/serctl: line 627: kill: (8771) - No such process stopped Starting SER : PID file exists! (/var/run/ser.pid) already running? How can I solve it? Thanks, Marc

2 1

[Serusers] fix_socket_list: could not rev. resolve .....
by Linh Pham 09 Aug '05

09 Aug '05

Hi I'm new to Linux and SER so bear with me :) Yesterday I installed FC4 and SER (tar.gz). SER runs OK and I was able to capture some packets with Ethereal. However, this morning SER is not working. I didn't change anything in the config file. The line 'fifo=/tmp/ser_fifo' still in the config file. What should I do to make SER run again? And please explain what 'Segmentation fault' in ser -c means. Thank you. [root@localhost /]# ser -c 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10<http://192.168.1.10> 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10<http://192.168.1.10> Listening on udp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 udp: 192.168.1.10 <http://192.168.1.10> [192.168.1.10 <http://192.168.1.10> ]:5060 tcp: 127.0.0.1 <http://127.0.0.1> [127.0.0.1 <http://127.0.0.1>]:5060 tcp: 192.168.1.10 <http://192.168.1.10> [192.168.1.10 <http://192.168.1.10> ]:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060 config file ok, exiting... Segmentation fault [root@localhost /]# uname -a Linux localhost.localdomain 2.6.11-1.1369_FC4smp #1 SMP Thu Jun 2 23:08:39 EDT 2005 i686 i686 i386 GNU/Linux [root@localhost /]# serctl ps Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config [root@localhost /]# var/log/messages: Aug 9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:04:44 localhost ser[4815]: Maxfwd module- initializing Aug 9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:05:46 localhost ser[4847]: Maxfwd module- initializing Aug 9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:08:06 localhost ser[4881]: Maxfwd module- initializing Aug 9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 <http://192.168.1.10> Aug 9 09:08:09 localhost ser[4884]: Maxfwd module- initializing -- Best regards, Linh Pham

2 1

[Serusers] Force MediaProxy for PSTN GW
by Ozan Blotter 09 Aug '05

09 Aug '05

Dear List, I'm deleted many things in SER and reconfigured it : * clients behind ADSL Routers so NATted clients, since we apply for forwarding for port 5060 in each modem, they can register with SER and they can talk with each others, voice traffic does not pass through SER which is good and preferred :) * i have already set up mediaproxy but stopped it to make this experiment with OpenSER, but i will start it again for case : If a client needs to call PSTN, the voice should go from client to SER (no MediaProxy) and from SER to PSTN (MediaProxy) Is it possible to force SER to use MediaProxy just for case of PSTN calls simply ? Thanks, Ozan

1 0

[Serusers] SERWEB version
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, I have just upgaraded to ser-0.9.0 from ser-0.8.11. Do I need to upgrade my serweb also to a later version. If yes, is there any workaround as I have tweaked my previous serweb php codes too much and doing that again will be cumbersome Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

1 0

[Serusers] serctl
by harry gaillac 09 Aug '05

09 Aug '05

hello, How can I change serctl to get "serctl alias add <alias> <uri> <email> " in order to add email in aliase table . Regards Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

2 1

FW: [Serusers] Need to do load balancing with two ser servers.
by Prajyot 09 Aug '05

09 Aug '05

Any advise for me on this issue? Regards, Prajyot Shirsolkar Network Engineer, From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Prajyot Sent: Wednesday, August 03, 2005 1:38 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Need to do load balancing with two ser servers. Hi, We are using ser v 0.8.14, we are looking for a solution in which I can use two or more SER servers to do load balancing like a cluster design. Any ideas how can I achieve this? Thanks in advance. Regards, Prajyot Shirsolkar

2 1

[Serusers] Outbound proxy setting of phone when using mediaproxy
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, What should be the value/ address in the outbound proxy field of xten when using mediaproxy. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

RE: [Serusers] fix_socket_list: could not rev. resolve .....
by Ashutosh Kumar 09 Aug '05

09 Aug '05

Hi, SER cannot listen on private IP addresses, the listen address should be the public address of the interface on which SER is running. The address(es) should not be 127.* or 192.* To eliminate this problem, use either of the two simple approaches; 1. EITHER use the command line ser l xxx.xxx.xxx.xxx where xxx.xxx.xxx.xxx is the public ip of the machine 2. OR, insert the line listen= xxx.xxx.xxx.xxx on top variable declarations sections of your ser.cfg file. This approach is a better one. Hope that helps. Regards, Ashutosh ________________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Linh Pham Sent: Tuesday, August 09, 2005 8:13 AM To: serusers(a)lists.iptel.org Subject: [Serusers] fix_socket_list: could not rev. resolve ..... Hi I'm new to Linux and SER so bear with me :) Yesterday I installed FC4 and SER (tar.gz). SER runs OK and I was able to capture some packets with Ethereal. However, this morning SER is not working. I didn't change anything in the config file. The line 'fifo=/tmp/ser_fifo' still in the config file. What should I do to make SER run again? And please explain what 'Segmentation fault' in ser -c means. Thank you. [root@localhost /]# ser -c 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 0(5050) WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Listening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.168.1.10 [192.168.1.10]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.168.1.10 [192.168.1.10]:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 udp: localhost:5060 udp: localhost.localdomain:5060 config file ok, exiting... Segmentation fault [root@localhost /]# uname -a Linux localhost.localdomain 2.6.11-1.1369_FC4smp #1 SMP Thu Jun 2 23:08:39 EDT 2005 i686 i686 i386 GNU/Linux [root@localhost /]# serctl ps Error opening ser's FIFO /tmp/ser_fifo Make sure you have line fifo=/tmp/ser_fifo in your config [root@localhost /]# var/log/messages: Aug 9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:04:44 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:04:44 localhost ser[4815]: Maxfwd module- initializing Aug 9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:05:46 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:05:46 localhost ser[4847]: Maxfwd module- initializing Aug 9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:08:06 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:08:06 localhost ser[4881]: Maxfwd module- initializing Aug 9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:08:09 localhost ser: WARNING: fix_socket_list: could not rev. resolve 192.168.1.10 Aug 9 09:08:09 localhost ser[4884]: Maxfwd module- initializing -- Best regards, Linh Pham

1 0

RE: [Serusers] error starting ser
by Ashutosh Kumar 09 Aug '05

09 Aug '05

The file exists alright, but it might be the mysql.so of a previous version of SER which might not have been overwritten. So, you may try wiping the current SER directories clean and retry re-compiling SER. Even if that doesnt help, try ldconfig ing the file. Regards Ashutosh ________________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of chris Sent: Tuesday, August 09, 2005 1:08 PM To: serusers(a)lists.iptel.org Subject: [Serusers] error starting ser i tried the command ser -c -f ser.cfg and this is the result. bash-2.05# ser -c -f ser.cfg 0(2092) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: ld.so.1: ser: fatal: libmysqlclient.so.10: open failed: No such file or directory 0(2092) parse error (15,13-14): failed to load module ERROR: bad config file (1 errors) bash-2.05# but, /usr/local/lib/ser/modules/mysql.so is existing, pls advise what could have gone wrong.

1 0

[Serusers] NAT solution for sip
by N A R U K A 09 Aug '05

09 Aug '05

Hi all, can anybody tell me ne vendor offering solution for NAT in SIP or any specific solution fo the same. I am using ser on RedHat 9 server and not able to solve the problem. Thanks in advance, waiting for the reply.. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

1 0

Re: RE: [Serusers] error starting ser
by seehoe yee 09 Aug '05

09 Aug '05

Hi, try locating libmysqlclient.so.10 # locate libmysqlclient.so.10 if it does not exist, you could get the rpm from http://dev.mysql.com/downloads/mysql/ look for --> MySQL-shared-<mysql_version>.rpm after installing it should work! cheers, seehoe ----- Original Message ----- From: "Pat wang" <wangyu39(a)hotmail.com> Date: Tuesday, August 9, 2005 4:34 pm Subject: RE: [Serusers] error starting ser > Hi, > > try to link the missing file "libmysqlclient.so.10" to another > file at > directory: /usr/lib/mysql > > something like: ln -s libmysqlclient.so.10 libmysqlclient.so.10.0.0 > > depends on what Linux you are using. The file name may different. > > Good luck, > > Pat > > >From: "chris" <chris(a)fivestartel.com> > >To: <serusers(a)lists.iptel.org> > >Subject: [Serusers] error starting ser > >Date: Tue, 9 Aug 2005 15:38:07 +0800 > > > >i tried the command ser -c -f ser.cfg and this is the result. > > > >bash-2.05# ser -c -f ser.cfg > > 0(2092) ERROR: load_module: could not open module > ></usr/local/lib/ser/modules/mysql.so>: ld.so.1: ser: fatal: > >libmysqlclient.so.10: open failed: No such file or directory > > 0(2092) parse error (15,13-14): failed to load module > >ERROR: bad config file (1 errors) > >bash-2.05# > > > >but, /usr/local/lib/ser/modules/mysql.so is existing, pls advise > what could > >have gone wrong. > >_______________________________________________ > >Serusers mailing list > >serusers(a)lists.iptel.org > >http://lists.iptel.org/mailman/listinfo/serusers > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] SER+SEMS problem
by Gareth C. Fowler 09 Aug '05

09 Aug '05

I'm having real difficulties connecting SER to SEMS, I've followed the configuration files, but it doesn't seem to work. For example if I dial 666 for echo according to the logs it connects, but then instantly disconnects, I've included below my ser.cfg & sems.cfg files, if someone wouldn't mind giving me some help. Thanks. G. ser.cfg ----------------------------- debug=7 fork=yes log_stderror=no port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/xlog.so" modparam("auth_db|uri_db|usrloc|acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("acc", "log_level", 1) modparam("acc", "log_flag", 1) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "db_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "db_missed_flag", 2) modparam("acc", "report_cancels", 1) route { if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; record_route(); if (loose_route()) { t_relay(); break; }; if (uri==myself) { if (!(method=="REGISTER" || method=="ACK" || method=="INVITE" || method=="BYE" || method=="CANCEL" )) { sl_send_reply("501", "method not understood here"); break; } if (method=="REGISTER") { sl_send_reply("200","OK"); break; }; if (!t_newtran()){ sl_send_reply("500","could not create transaction"); break; }; if (method=="ACK"){ t_relay(); break; }; t_reply("100","Trying - just wait a minute !"); if (method=="INVITE"){ if (uri=~"sip:100.*@") { xlog("L_INFO", "Starting contact SEMS conference\n\n"); if(!t_write_req("/tmp/am_fifo","conference")) { xlog("L_INFO", "Could not contact SEMS conference\n\n"); t_reply("500","error contacting sems conference"); }; xlog("L_INFO", "Ending contact SEMS conference\n\n"); break; }; if (uri=~"sip:200.*@") { xlog("L_INFO", "Starting contact with SEMS annoucement\n\n"); if(!t_write_req("/tmp/am_fifo","announcement")) { xlog("L_INFO", "Could not contact SEMS announcement\n\n"); t_reply("500","error contacting sems annoucement"); }; xlog("L_INFO", "Ending contact with SEMS annoucement\n\n"); break; }; if (uri=~"sip:666.*@") { xlog("L_INFO", "Starting contact with SEMS echo\n\n"); if(!t_write_req("/tmp/am_fifo","echo")) { xlog("L_INFO", "Could not contact SEMS echo\n\n"); t_reply("500","error contacting sems echo"); }; xlog("L_INFO", "Ending contact with SEMS echo\n\n"); break; }; xlog("L_INFO", "Starting contact with SEMS voicemail\n\n"); if(!t_write_req("/tmp/am_fifo","voicemail")) { xlog("L_INFO", "Could not contact SEMS voicemail\n\n"); t_reply("500","error contacting sems voicemail"); }; xlog("L_INFO", "Ending contact with SEMS voicemail\n\n"); break; } else if (method=="BYE" || method=="CANCEL") { if(!t_write_req("/tmp/am_fifo","bye")) { t_reply("500","error contacting sems"); }; break; }; }; if (!t_relay()) { sl_reply_error(); }; } sems.cfg ----------------------------- fork=yes stderr=no loglevel=3 fifo_name=/tmp/am_fifo ser_fifo_name=/tmp/ser_fifo send_method=fifo plugin_path=/usr/local/lib/sems/plug-in/ smtp_server=localhost smtp_port=25 config.voicemail=inline rec_file_extension=wav announce_path=/usr/local/lib/sems/audio/ default_announce=default_en.wav max_record_time=30 accept_delay=0 email_template_path=/usr/local/etc/sems/ config.voicemail=end config.announcement=inline announce_path=/usr/local/lib/sems/audio/ default_announce=default_en.wav config.announcement=end config.conference=inline default_announce=/usr/local/lib/sems/audio/first_participant.wav config.conference=end config.number_reader=inline number_path=/usr/local/lib/sems/audio/ prolog_file=welcome_to_number_reader.wav epilog_file=thanks_calling_number_reader.wav config.number_reader=end

2 2

[Serusers] Not found
by Sebastian Kühner 09 Aug '05

09 Aug '05

Hello, I have a strange problem. Sometimes a user is calling to a PSTN Gateway (prefix 00) and ser is routing it correctly, but sometimes ser sends back a "NOT FOUND" to the user before forwarding the call to the Gateway... then the gateway sends back many "OK" messages that never reaches the caller. Why does that happen? Is ser too slow for the caller (I use a database for the routing)?? Thanks for your answer!!!

3 5

[Users] I want to test TLS with OpenSER, What the user agent client is campitable with TLS of OpenSER?
by dennis 08 Aug '05

08 Aug '05

Dear all, I want to test TLS with OpenSER, What the user agent client is campitable with TLS of OpenSER? __________________________________________________ 想即時收到新信通知？馬上下載Yahoo!奇摩即時通訊 http://messenger.yahoo.com.tw/

4 6

[Serusers] Install SER
by Hernando Maisano 08 Aug '05

08 Aug '05

Hello my name is Hernando, and I do not speak Ingles well. I need to install the SER in some distribution of RED HAT (fedora or previous), with support for MYSQL. As version they recommend to me? because the 0.9.3 do not appear RED HAT.... some suggestion? Thanks and excuse. Nando

3 2

[Serusers] Sending FQDN in VIA Header
by ranveer kunal 08 Aug '05

08 Aug '05

Hi frnds, Is there a way to configure SER so that it sends the domainname in via header ? Why is SER not responding to OPTIONS sent to it, it throws an error "404 not found" ? Regards, Ranveer. -- Memories : They bring Diamonds and Rust

3 4

Re: [Serusers] Xlite not working with SER+SEMS
by Pat wang 08 Aug '05

08 Aug '05

Hi Samuel, Thanks for the reply. This is exactly the problem. Stefen also point this out. I got it running now. Cheers, Pat >From: "Samuel Osorio Calvo" <samuel.osorio(a)nl.thalesgroup.com> >To: <wangyu39(a)hotmail.com>, <serusers(a)lists.iptel.org> >Subject: Re: [Serusers] Xlite not working with SER+SEMS >Date: Mon, 08 Aug 2005 10:59:10 +0200 > >Try to start SEMS with a user different from root. This way, the ICMP >watcher does not run and the RTP session will not be closed due to >non-compliant end-points. > >Samuel. > > >Unclassified. > >>> "yu wang" <wangyu39(a)hotmail.com> 08/02/05 07:19AM >>> >Hi, > >I've been working on conference with Xlite but it is not work. The problem >is SEMS starts sending media (default wav) back to Xlite once SEMS receives >the INVITE/SDP from Xlite. It seems a bug on Xlite not listening on the >media port after sending the INVITE thus it replys with ICMP port >unreachable. But I don't see anyone complain this on this list. Is >something >wrong with my configuration? > >Please please help me.... Thanks, > >Pat > > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers >

1 0

Re: Tr: Re: [Serusers] hardphones MOH
by harry gaillac 08 Aug '05

08 Aug '05

hello Maxim , I'm waiting your reply Harry --- Maxim Sobolev <sobomax(a)portaone.com> a écrit : > Yes, it will. I have this functionality in my > private repo, bit > unfortunately due to lack of free time I have not > merged support for > this feature into the public version of nathelper > yet. We have some > heavy changes that aren't applicable for the public > version, which has > to be filtered out. > > I am planning to do it sooner or later, maybe if you > are really > interested and can allocate some small amount of > money to this project I > can subcontract some of my friends/colleagues to do > it for me. > > -Maxim > > harry gaillac wrote: > > Hello, > > > > Does nathelper module + rtpproxy will be able to > ac as > > a 3cpp to provide MOH > > > > caller--------ser---------callee > > nathelper > > rtpproxy > > Regards > > Harry > > Remarque : message transféré en pièce jointe. > > > > > > > > > > > > > > > ___________________________________________________________________________ > > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > > Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > Re: [Serusers] hardphones MOH > > From: > > harry gaillac <gaillacharry(a)yahoo.fr> > > Date: > > Thu, 30 Jun 2005 23:01:32 +0200 (CEST) > > To: > > Nils Ohlmeier <lists(a)ohlmeier.org> > > > > To: > > Nils Ohlmeier <lists(a)ohlmeier.org> > > CC: > > serusers(a)lists.iptel.org > > > > > > What do you advise me ? > > > > I wish to use SER+Sems(ivr) to provide MOH. > > I've got two polycom ip300 however we just can > place > > on hold caller without music ! > > > > What can I do? what's the way? > > Does Ser or sems must act as 3cpp ? > > > > Regards > > Harry > > --- Nils Ohlmeier <lists(a)ohlmeier.org> a écrit : > > > > > >>snom UA's do, except that they spare the empty > offer > >>to the MOH server, but > >>send directly the SDP of the holdee to the MOH > >>server and expecting that the > >>server supports the chosen codec. > >>Beware that this 3pcc MOH alternative completely > >>breaks if there is any NAT > >>involved. > >> > >> Nils > >> > >>On Thursday 30 June 2005 22:29, harry gaillac > wrote: > >> > >>>hello, > >>> > >>>Anybody would be informed about ip phones able to > >>>provide moh according to > >>>http://www.tech-invite.com/Ti-sip-service-3.html > >>> > >>>regards > >>>harry > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >> > > > ___________________________________________________________________________ > > > >>>Appel audio GRATUIT partout dans le monde avec le > >> > >>nouveau Yahoo! Messenger > >> > >>>Téléchargez cette version sur > >> > >>http://fr.messenger.yahoo.com > >> > >>>_______________________________________________ > >>>Serusers mailing list > >>>serusers(a)lists.iptel.org > >>>http://lists.iptel.org/mailman/listinfo/serusers > >> > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > > Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] Issue with call forwarding
by Dave 08 Aug '05

08 Aug '05

Hello,I have implemented CFNR (Call forward on No Response) and CFU(Call forwardinf unconditional) using avp and I am running into the following problem: When CFU or CFNR are detected, the control is passed to route[2] (see below). CFU works fine and the call is forwarded to it's new destination. But CFNR does not work and the UA making the call gets a "Proxy Authentication Required" message from SER. Upon receiving this message, my UA gives me a congestion tone. This is strange since CFU works fine but in the case of CFNR, I see using ngrep that SER makes DNS queries to resolve my SIP domain (dns=no has been configured) The code is: route[2] { if (is_uri_host_local()) { if (!lookup("location")) { if (does_uri_exist()) { sl_send_reply("480", "Temporarily Unavailable"); break; } else { sl_send_reply("404", "User Not Found"); break; } ; } else { route(1); <-- this simply does t_relay() break; }; } else { sl_send_reply("302", "Temporarily Redirected"); break; }; } CFNR code is: ------------------------------------------- failure_route[1] { if (isflagset(22) && t_check_status("408")) { if (avp_pushto("$ruri", "s:cfnr")) { append_branch(); avp_delete("s:cfnr"); resetflag(22); route(2); break; }; }; } -------------------------------------------- Any pointers will be highly appreciated. Thanks ____________________________________________________ Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs

1 0

[Serusers] Config Errors
by zkeatts 08 Aug '05

08 Aug '05

I am getting the following config file error when I try to run the xml-rpc branch version of SER on a Red Hat 3.4.3-9 box. 0(20635) parse error (99,14-15): unknown command, missing loadmodule? 0(20635) parse error (100,16-17): unknown command, missing loadmodule? Can anyone indicate to me what might be the problem? The following are the steps I took to compile the package. 1) Compile and Install xmlrpc-c libraries. 2) $ make proper include_modules="mysql" $ make $ make modules include_modules="mysql" $ make install include_modules="mysql" 3) $ /usr/local/sbin/ser the ser.cfg file I am using is the quickstart ser.cfg Can anyone give me some insight into these errors? Thanks. Zach Keatts Software Engineer Nuvio.com

1 1

[Serusers] serweb
by marc doucen 08 Aug '05

08 Aug '05

3 2

[Serusers] adding groups
by harry gaillac 08 Aug '05

08 Aug '05

Hello, I want to add groups however for users however if i want to add new group not voicemail ld or local i receive: "Invalid privilege: mailbox ignored" So I have to add my group by hand in table grp. How can i solve this problem? Harry serveur1:~/asterisk# serctl acl grant bob mailbox MySql password: Invalid privilege: mailbox ignored +----------+------------+-----------+---------------------+ | username | domain | grp | last_modified | +----------+------------+-----------+---------------------+ | bob | nxs.yi.org | cellphone | 2005-08-08 14:11:00 | | bob | nxs.yi.org | local | 2005-08-08 14:14:52 | | bob | nxs.yi.org | voicemail | 2005-08-08 14:16:54 | +----------+------------+-----------+---------------------+ ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

2 1

[Serusers] ser radius accounting
by Dimitar Mojsovski 08 Aug '05

08 Aug '05

Hi all, I'm using ser and freeradius, and so far i have managed to set up the authentication, but I'm still having problems with the radius accounting. I've disabled sql and enabled radius acc module Makefile and compiled it. It loads with no problems, here's how i do it in my config : loadmodule "//lib/ser/modules/acc.so" modparam("acc", "log_level", 2) modparam("acc", "log_flag", 1) modparam("acc", "radius_config","/etc/radiusclient-ng/radiusclient.conf") modparam("acc", "service_type", 15) modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 3) and then I have : if (uri==myself) { if (method=="INVITE") { # mark the INVITEs for accounting setflag(1); # enforce record-routing so the BYEs will come through this server record_route(); }; if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!radius_www_authorize("")) { log(1, "REGISTER: challenging user\n"); www_challenge("", "0"); break; }; setflag(1); save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; Ser starts and runs with no errors, however when my sip users make calls I see no acc log in radacct table on the radius server. Am I looking at the right place or am I doing something wrong? -- Dimitar Mojsovski Macedonia On-Line Service Provider www.mol.com.mk

1 0

[Users] avpops tutorial updated
by Daniel-Constantin Mierla 08 Aug '05

08 Aug '05

Hello, the AVPOPS tutorial has been updated to the latest development version: http://www.voice-system.ro/docs/avpops/ Among presentations of the new methods (avp_op(), avp_subst(), avp_printf() ...), it includes a new example of how the newest AVPOPS capabilities allow to store and use bitmap ACL per user. The old version, valid for 0.9.x, is now located at: http://www.voice-system.ro/docs/avpops/0.9.0/ Daniel

1 0

[Serusers] radius auth, can't login with a linksys pap2-na
by Simone Cittadini 08 Aug '05

08 Aug '05

I can't have the lines of a linksys pap authenticate on ser, but only if the backend is radius, seems it doesn't like the uri: <sip:172.18.1.12> part of the SIP request, with Xlite that part reads uri: <sip:2klab.net> and radius authenticates ok. with a mysql backend for auth both uri authenticates well, so I think I'm missing something in radius configuration. (I've followed the RADIUS_howto on iptel.org) from ser.cfg : if (uri==myself) { if (method=="REGISTER") { if (!radius_www_authorize("2klab.net")) { www_challenge("2klab.net", "0"); break; }; save("location"); break; }; lookup("aliases"); # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; This is the log for a succesful register with mysql auth backend : 6(1885) SIP Request: 6(1885) method: <REGISTER> 6(1885) uri: <sip:172.18.1.12> 6(1885) version: <SIP/2.0> 6(1885) parse_headers: flags=1 6(1885) Found param type 232, <branch> = <z9hG4bK-1741b415>; state=16 6(1885) end of header reached, state=5 6(1885) parse_headers: Via found, flags=1 6(1885) parse_headers: this is the first via 6(1885) After parse_msg... 6(1885) preparing to run routing scripts... 6(1885) parse_headers: flags=128 6(1885) end of header reached, state=9 6(1885) DEBUG: get_hdr_field: <To> [29]; uri=[sip:2002@172.18.1.12] 6(1885) DEBUG: to body [2002 <sip:2002@172.18.1.12> 6(1885) get_hdr_field: cseq <CSeq>: <2> <REGISTER> 6(1885) DEBUG:maxfwd:is_maxfwd_present: value = 70 6(1885) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 6(1885) grep_sock_info - checking if host==us: 11==11 && [172.18.1.12] == [172.18.1.12] 6(1885) grep_sock_info - checking if port 5060 matches port 5060 6(1885) parse_headers: flags=4096 6(1885) check_nonce(): comparing [42f6ef654b9c6efc04d7e468746d818f8e1633ab] and [42f6ef654b9c6efc04d7e468746d818f8e1633ab] 6(1885) HA1 string calculated: 9b7a9697157ad673ed341c1aca7c12c5 6(1885) check_response(): Our result = '1f77523c69a80ae921d5e05d8a5e0fcd' 6(1885) check_response(): Authorization is OK 6(1885) save_rpid(): rpid value is '' 6(1885) parse_headers: flags=-1 6(1885) DEBUG: get_hdr_body : content_length=0 6(1885) found end of header 6(1885) parse_headers: flags=33554432 6(1885) build_contact(): Created Contact HF: Contact: <sip:2002@172.18.1.13:5061>;expires=3600 6(1885) parse_headers: flags=-1 6(1885) check_via_address(172.18.1.13, 172.18.1.13, 0) 6(1885) DEBUG:destroy_avp_list: destroying list (nil) 6(1885) receive_msg: cleaning up And this one for an unsuccesful register from the same pap client, but radius backend : 9(2042) SIP Request: 9(2042) method: <REGISTER> 9(2042) uri: <sip:172.18.1.12> 9(2042) version: <SIP/2.0> 9(2042) parse_headers: flags=1 9(2042) Found param type 232, <branch> = <z9hG4bK-80868dab>; state=16 9(2042) end of header reached, state=5 9(2042) parse_headers: Via found, flags=1 9(2042) parse_headers: this is the first via 9(2042) After parse_msg... 9(2042) preparing to run routing scripts... 9(2042) parse_headers: flags=128 9(2042) end of header reached, state=9 9(2042) DEBUG: get_hdr_field: <To> [29]; uri=[sip:2002@172.18.1.12] 9(2042) DEBUG: to body [2002 <sip:2002@172.18.1.12> 9(2042) get_hdr_field: cseq <CSeq>: <3> <REGISTER> 9(2042) DEBUG:maxfwd:is_maxfwd_present: value = 70 9(2042) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 9(2042) grep_sock_info - checking if host==us: 11==11 && [172.18.1.12] == [172.18.1.12] 9(2042) grep_sock_info - checking if port 5060 matches port 5060 9(2042) parse_headers: flags=4096 9(2042) check_nonce(): comparing [42f6f2f3e9dd51cad68be2927d5863727cd3798a] and [42f6f2f3e9dd51cad68be2927d5863727cd3798a] 9(2042) authorize(): Credentials realm and URI host do not match 9(2042) build_auth_hf(): 'WWW-Authenticate: Digest realm="2klab.net", nonce="42f6f2f3e9dd51cad68be2927d5863727cd3798a" 9(2042) parse_headers: flags=-1 9(2042) DEBUG: get_hdr_body : content_length=0 9(2042) found end of header 9(2042) check_via_address(172.18.1.13, 172.18.1.13, 0) 9(2042) DEBUG:destroy_avp_list: destroying list (nil) 9(2042) receive_msg: cleaning up seems Xlite sends my domain as uri, and radius likes it : 4(2034) SIP Request: 4(2034) method: <REGISTER> 4(2034) uri: <sip:2klab.net> 4(2034) version: <SIP/2.0> 4(2034) parse_headers: flags=1 4(2034) Found param type 235, <rport> = <n/a>; state=6 4(2034) Found param type 232, <branch> = <z9hG4bK461FD1B046D3D5FB1FE0012188DF1BB8>; state=16 4(2034) end of header reached, state=5 4(2034) parse_headers: Via found, flags=1 4(2034) parse_headers: this is the first via 4(2034) After parse_msg... 4(2034) preparing to run routing scripts... 4(2034) parse_headers: flags=128 4(2034) end of header reached, state=9 4(2034) DEBUG: get_hdr_field: <To> [29]; uri=[sip:user1@2klab.net] 4(2034) DEBUG: to body [user1 <sip:user1@2klab.net> 4(2034) get_hdr_field: cseq <CSeq>: <2352> <REGISTER> 4(2034) DEBUG:maxfwd:is_maxfwd_present: value = 70 4(2034) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 4(2034) grep_sock_info - checking if host==us: 9==11 && [2klab.net] == [172.18.1.12] 4(2034) grep_sock_info - checking if port 5060 matches port 5060 4(2034) grep_sock_info - checking if host==us: 9==11 && [2klab.net] == [172.18.1.12] 4(2034) grep_sock_info - checking if port 5060 matches port 5060 4(2034) check_nonce(): comparing [42f6f204483c60785f0ffd667859ed55b34fad23] and [42f6f204483c60785f0ffd667859ed55b34fad23] 4(2034) radius_authorize_sterman(): Success 4(2034) save_rpid(): rpid value is '' 4(2034) parse_headers: flags=-1 4(2034) DEBUG: get_hdr_body : content_length=0 4(2034) found end of header 4(2034) parse_headers: flags=33554432 4(2034) build_contact(): Created Contact HF: Contact: <sip:user1@172.18.1.10:5060>;expires=1800 4(2034) parse_headers: flags=-1 4(2034) check_via_address(172.18.1.10, 172.18.1.10, 0) 4(2034) DEBUG:destroy_avp_list: destroying list (nil) 4(2034) receive_msg: cleaning up

1 0

Re: [Serusers] Sending FQDN in VIA Header
by Samuel Osorio Calvo 08 Aug '05

08 Aug '05

I think Juha already answered you...I'll try to expand his answer, see inline Hope it helps, Samuel. Unclassified. >>> ranveer kunal <ranveerkunal(a)gmail.com> 08/08/05 08:07AM >>> Hi frnds, Is there a way to configure SER so that it sends the domainname in via header ? [SAM] I don't know....take a look at advertised_ip and advertised_port (check spelling because I'm not sure about it..) and they might do the trick. Why is SER not responding to OPTIONS sent to it, it throws an error "404 not found" ? [SAM] Probably you do not handle SIP OPTIONS message properly in your config file, and it is instead treated as an INVITE. You have to add something like if (method==OPTIONS){ options_reply(); break; } There are several parameters to configure what SER is sending back with options_reply(). Take a look at options module. modparam("options", "support", "100rel") modparam("options", "accept_language", "de") modparam("options", "accept_encoding", "gzip") modparam("options", "accept", "application/*") Regards, Ranveer. -- Memories : They bring Diamonds and Rust _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] acc_request
by Pavol Segeč 08 Aug '05

08 Aug '05

Hi all! I tried to set up missed call reporting through the Admin guide v0.11.0, but for action acc_request ser -c reports parse error. Is the action part of the the acc.so module anymore? palo

4 10

[Serusers] Setting tm module parameter "fr_inv_timer_avp" more than once during a call
by reticent 08 Aug '05

08 Aug '05

It seems that setting the "fr_inv_timer_avp" parameter more than once during a call is not possible. However there is a situation where this is necessary: 1. VoIP ATA to VoIP ATA call with call forwarding where call forwarded number is a PSTN destination To facilitate Call Forward No Answer, the fr_inv_timer_avp is used and set to a value (say 12 seconds), after this timer hits a failure_block is run, in this failure block i rewrite the destination and check if this destination is a PSTN number. If it is than I would like to change the fr_inv_timer_avp parameter to somthing higher due to the nature of PSTN termination but it does not seem to have any effect. Has anyone experienced this problem and possible found a workaround? Or maybe this is a known issue tavis

2 1

[Serusers] sms module/ gsm_auth
by harry gaillac 08 Aug '05

08 Aug '05

hello, How can we send/received sms and calls from gsm gateway see http://www.2n.cz/products/gsm_gateways/voip/voiceblue_enterprise.html Does sms module and gsm_auth are out of date ? harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

3 3

Re: [Serusers] Xlite not working with SER+SEMS
by Samuel Osorio Calvo 08 Aug '05

08 Aug '05

Try to start SEMS with a user different from root. This way, the ICMP watcher does not run and the RTP session will not be closed due to non-compliant end-points. Samuel. Unclassified. >>> "yu wang" <wangyu39(a)hotmail.com> 08/02/05 07:19AM >>> Hi, I've been working on conference with Xlite but it is not work. The problem is SEMS starts sending media (default wav) back to Xlite once SEMS receives the INVITE/SDP from Xlite. It seems a bug on Xlite not listening on the media port after sending the INVITE thus it replys with ICMP port unreachable. But I don't see anyone complain this on this list. Is something wrong with my configuration? Please please help me.... Thanks, Pat _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] voicemail module
by harry gaillac 08 Aug '05

08 Aug '05

Hello, If we receive a call from any users who are not registred in subscriber table does voicemail module is able to set caller address in mail header ? For example : caller ----PSTN--------ser+sems------callee unavailable 123456 DB sip:callee@mydomain Harry ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] delay in dialing or registration
by Chia Huey Lim 08 Aug '05

08 Aug '05

Hi list, I face a serious problem where sip packets are not processed immediately, as in when I dial a number, it takes a while to ring to the other party, on the system log, I can see the packets coming in a lot later than it should. However sometimes it is immediate, but it's not been consistent. Registration also same thing, sometimes fast, sometimes have to wait for long time. I am running postgres db, sip registration and sip proxy in the same server. It's has single XEON proc, 2 GB RAM, with 2MBps burstable to 10MBps to the Internet. In my ser.cfg file, I m using db mode 2 for usrloc, with children not set, which should be 8 children if according to serctl ps status I currently have around 600 registered user only, with expiry values of 1200s or 3600s. Do I need to readjust the priority for the ser processes? Will that help? Any other area I should look into? Thanks in advance for your advice.. Regards, Chia

1 0

[Serusers] problem in starting mysql module in ser !
by zhu 08 Aug '05

08 Aug '05

hello, guys: I try to use freeradius and ser. when i start ser, the following messages came out and reload mysql three times and finally stop at mydql module: get_connection(): Connection not found in the pool 0(0) release_connection(): Removing connection from the pool 0(0) get_connection(): Connection not found in the pool 0(0) release_connection(): Removing connection from the pool 0(0) find_mod_export: found <db_use_table> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_init> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_close> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_raw_query> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_free_result> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_insert> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_delete> in module mysql [/usr/local/lib/ser/modules/mysql.so] 0(0) find_mod_export: found <db_update> in module mysql [/usr/local/lib/ser/modules/mysql.so] any firend knows how to solve it. thanks lot! zhu

1 0

[Serusers] missed_calls shows IP for domain
by John Clements 07 Aug '05

07 Aug '05

I am running ser 0.9.3 and serweb. When I go to Missed Calls, it shows that I have none, but the missed_calls table shows a bunch of entries. In all of them, domain is set to the IP of the SER server, instead of the domain that I used to add the user. Anyone know why and how to get it to save the domain in missed_calls instead of the IP? -John

3 4

[Serusers] Proxy
by Anderson Alves de Albuquerque 07 Aug '05

07 Aug '05

How cani I could use SER as proxy?

2 1

Re: Tr: Re: [Serusers] hardphones MOH
by harry gaillac 07 Aug '05

07 Aug '05

Hello, Sorry I should not this post here. I 've been waiting for a reply for a long time . I agree to pay for it if you can you explain me how nathelper/rtpproxy provide MOH ? Regards Harry --- Maxim Sobolev <sobomax(a)portaone.com> a écrit : > Yes, it will. I have this functionality in my > private repo, bit > unfortunately due to lack of free time I have not > merged support for > this feature into the public version of nathelper > yet. We have some > heavy changes that aren't applicable for the public > version, which has > to be filtered out. > > I am planning to do it sooner or later, maybe if you > are really > interested and can allocate some small amount of > money to this project I > can subcontract some of my friends/colleagues to do > it for me. > > -Maxim > > harry gaillac wrote: > > Hello, > > > > Does nathelper module + rtpproxy will be able to > ac as > > a 3cpp to provide MOH > > > > caller--------ser---------callee > > nathelper > > rtpproxy > > Regards > > Harry > > Remarque : message transféré en pièce jointe. > > > > > > > > > > > > > > > ___________________________________________________________________________ > > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > > Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > > > > ------------------------------------------------------------------------ > > > > Subject: > > Re: [Serusers] hardphones MOH > > From: > > harry gaillac <gaillacharry(a)yahoo.fr> > > Date: > > Thu, 30 Jun 2005 23:01:32 +0200 (CEST) > > To: > > Nils Ohlmeier <lists(a)ohlmeier.org> > > > > To: > > Nils Ohlmeier <lists(a)ohlmeier.org> > > CC: > > serusers(a)lists.iptel.org > > > > > > What do you advise me ? > > > > I wish to use SER+Sems(ivr) to provide MOH. > > I've got two polycom ip300 however we just can > place > > on hold caller without music ! > > > > What can I do? what's the way? > > Does Ser or sems must act as 3cpp ? > > > > Regards > > Harry > > --- Nils Ohlmeier <lists(a)ohlmeier.org> a écrit : > > > > > >>snom UA's do, except that they spare the empty > offer > >>to the MOH server, but > >>send directly the SDP of the holdee to the MOH > >>server and expecting that the > >>server supports the chosen codec. > >>Beware that this 3pcc MOH alternative completely > >>breaks if there is any NAT > >>involved. > >> > >> Nils > >> > >>On Thursday 30 June 2005 22:29, harry gaillac > wrote: > >> > >>>hello, > >>> > >>>Anybody would be informed about ip phones able to > >>>provide moh according to > >>>http://www.tech-invite.com/Ti-sip-service-3.html > >>> > >>>regards > >>>harry > >>> > >>> > >>> > >>> > >>> > >>> > >>> > >> > > > ___________________________________________________________________________ > > > >>>Appel audio GRATUIT partout dans le monde avec le > >> > >>nouveau Yahoo! Messenger > >> > >>>Téléchargez cette version sur > >> > >>http://fr.messenger.yahoo.com > >> > >>>_______________________________________________ > >>>Serusers mailing list > >>>serusers(a)lists.iptel.org > >>>http://lists.iptel.org/mailman/listinfo/serusers > >> > > > > > > > > > > > > > > > > > ___________________________________________________________________________ > > > Appel audio GRATUIT partout dans le monde avec le > nouveau Yahoo! Messenger > > Téléchargez cette version sur > http://fr.messenger.yahoo.com > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

1 0

[Serusers] accounting
by harry gaillac 06 Aug '05

06 Aug '05

Hello, I use ser/serweb-0.9.3 I added tow accounts with numerical aliases. When I dial user1@domain to user2@domain it's ok. if i wish to forward to voicemail sems send me back voicemessages. However if i dial alias1@domain to alias2@domain I get the message below. How can I solve this problem ? Harry /////////////////////////////////////////////////////// Jul 24 14:58:15 serveur1 Sems[2535]: Error: (AmSession.cpp)(startSession)(497): 404 voicemail: no email address for user <84> Jul 24 14:58:15 serveur1 /usr/sbin/ser[7495]: ACC: call missed: method=INVITE, i-uri=sip:84@nxs.yi.org:5060;user=phone, o-uri=sip:h.gaillac@192.168.0.20, call_id=66219bb6-f9eef79c-bc2479d3(a)192.168.0.21, from="test" <sip:test@nxs.yi.org>;tag=CB323432-D0A509E1, code=404 voicemail: no email address for user <84>, userpart=84 /////////////////////////////////////////////////////// ___________________________________________________________________________ Appel audio GRATUIT partout dans le monde avec le nouveau Yahoo! Messenger Téléchargez cette version sur http://fr.messenger.yahoo.com

5 9

[Serusers] Xten With SER
by Marcelo Vasconcelos 06 Aug '05

06 Aug '05

Hi all, i´m a new user of ser and i belive that ser is working properly, but i can´t login with X-LITE i only have unauthorized message. Please Help me. Tanks Marcelo Vasconcelos

1 0

[Users] Changing 'expires' value in response to REGISTER
by Kanakatti Mahesh Subramanya 06 Aug '05

06 Aug '05

And the beat goes on... I 've got a bunch of Snom's that have a minimum register interval of 1 minute. I *know* that I can get them to register every 30 seconds if I set the 'expires' value in the Contact header of the '200 OK' response to the REGISTER request appropriately (whew) e.g., instead of returning Contact: <sip:jake.foobaz@1.2.3.4:49154>;expires=60 I return Contact: <sip:jake.foobaz@1.2.3.4:49154>;expires=30 The question is - how do I change the 'expires' value? append_to_reply() isn't relevant - i don't want another header subst() on the request's 'Expires' header isn't useful since build_contact() seems to extract it's values from the original request. Any changes I made to it seem to be ignored Any ideas? cheers

4 6

RE: [Serusers] Open source Legal Issue
by Mr Greg Plater 06 Aug '05

06 Aug '05

I say because alterations and configuring was done from many peoples works on lists and forums, the work is already published and is covered by the GPL and if any is not published it must be publish under the GPL. I don't see how they can deny me or any person working under the GPL the right to use alter or distribute the applications again from the original source code. As a contractor I believe if any source code is developed its owned by the contractor and he is obligated under the license he developed it the GPL for example. If the person is an Employee then the code developed would be owned by the company Employing the staff member and the company would be obligated under the license that applies example GPL. I believe the outcome of this injunction places developers in the position that once they develop something under the GPL then the company it was developed for then has the right to say they can never use it again. I don't believe the GPL was intended to allow this. -----Original Message----- From: Iqbal [mailto:iqbal@gigo.co.uk] Sent: Saturday, 6 August 2005 9:55 AM To: Mr Greg Plater Subject: Re: [Serusers] Open source Legal Issue Also On one hand they dont want you to disclose, however on the othe hand they accepted GPL, if they argue GPL, and that you must handover, then the handover is to the public in general, hence you will be disclosing, which they do not want, they are contradicting themselves. Iqbal Mr Greg Plater wrote: > 5th Aug 2005 an order was handed down from a supreme court judge in > Brisbane Australia at 10am. > > Injunction restraining the defendant his servants or agents from > directly using, disclosing, selling, transferring or in any other > manner dealing with the software written or developed or configured by > the defendant relating to the VOIP network proposed by the plaintiff > including any correspondence, notes , records or other documentation > relating to such software, and any variations on the same. > > The complete solution was based on open source applications and they > received a copy of the GPL before the project commenced and had been > given access to the source code used. I am unable to disclose the open > source applications used. > > I note i was required to shutdown the servers and the platform used > yesterday including private projects because the same base linux > version was used. > > The issue started when i was contracted to create a network based on > open source applications, the party contracting myself decided to drop > the project and items in the agreement between them and i are still > outstanding including payment and this is an on going battle in the > courts. > > Until that is all settled I'm not required to hand over the hardware > or applications, source code, notes etc... but under the license GPL i > am required to provide it so i have provided the source code etc > including all alterations made and there source code... This allowing > myself to stay within the license GPL. > > I don't believe they are able to give the injunction and need advice > on what or if anything i can do. > > My understanding of Open source. It is free to use alter or distribute > under the GPL and its conditions. > >------------------------------------------------------------------------ > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] Open source Legal Issue
by Mr Greg Plater 05 Aug '05

05 Aug '05

5th Aug 2005 an order was handed down from a supreme court judge in Brisbane Australia at 10am. Injunction restraining the defendant his servants or agents from directly using, disclosing, selling, transferring or in any other manner dealing with the software written or developed or configured by the defendant relating to the VOIP network proposed by the plaintiff including any correspondence, notes , records or other documentation relating to such software, and any variations on the same. The complete solution was based on open source applications and they received a copy of the GPL before the project commenced and had been given access to the source code used. I am unable to disclose the open source applications used. I note i was required to shutdown the servers and the platform used yesterday including private projects because the same base linux version was used. The issue started when i was contracted to create a network based on open source applications, the party contracting myself decided to drop the project and items in the agreement between them and i are still outstanding including payment and this is an on going battle in the courts. Until that is all settled I'm not required to hand over the hardware or applications, source code, notes etc... but under the license GPL i am required to provide it so i have provided the source code etc including all alterations made and there source code... This allowing myself to stay within the license GPL. I don't believe they are able to give the injunction and need advice on what or if anything i can do. My understanding of Open source. It is free to use alter or distribute under the GPL and its conditions.

1 0

[Serusers] SIP messages timeout
by Sebastian Kühner 05 Aug '05

05 Aug '05

Hello, I'm with accounting in ser and I noticed, that in some calls the BYE message doesn't reach my server. In the most cases yes, but in 5% of the cases not. Is there any way to force the caller/callee to send the BYE message back? Thanks!! Sebastian

4 4

[Serusers] How to test SIP with TCP?
by Pat wang 05 Aug '05

05 Aug '05

Hi, I understand both Xlite (or any other SIP client such as a Cisco 7960) and SER support TCP but I am not clear how to force a UAC starts a call via TCP. I've been searching over internet but couldn't find anything yet (Forgive my bad searching skills). I am really appreciate if anyone can show me some information of testing SER and UAC with TCP. Thanks, Have a nice weekend, Pat

2 2

[Users] feature request documentation
by Klaus Darilion 05 Aug '05

05 Aug '05

Hi! It would be nice to have a list of all functions inside openser (core + modules). Is it possible to autmatically generate this? e.g. for the core parsing the lex files, for the module functions parsing the sgml files regards, klaus

2 3

[Serusers] Routing
by Sebastian Kühner 05 Aug '05

05 Aug '05

Hi! Has anyone of you tried to use the database to make routing? I need to get information of the database and then rewritehost with the result... Thanks! Sebastian

2 2

[Serusers] Mediaproxy doesnt resolve private IP to public IP
by Ashutosh Kumar 05 Aug '05

05 Aug '05

Hi, I m using mediaproxy for NAT traversal for client phones. I m using the following code straight out of book from ser-0.9.0 source package, but still the natted clients are showing their internal IPs in their AOR when I run a "serctl ul show ". Can anyone tell me where is the problem- route{ if (!mf_process_maxfwd_header("10")) { if (method!="ACK") { sl_send_reply("483", "Too many hops"); }; break; }; if (msg:len >= max_len) { if (method!="ACK") { sl_send_reply("513", "Message too big"); }; break; }; if (method=="REGISTER") { if (client_nat_test("3")) {setflag(2);force_rport();fix_contact();}; if (!www_authorize("", "subscriber")) {www_challenge("", "0");break;} if (!save("location")) {sl_reply_error();}; break; }; if (method=="INVITE") { if (!(is_from_local() || is_uri_host_local())) {sl_send_reply("403", "Relaying is forbidden");break;}; t_on_failure("1"); } else if (method == "BYE" || method == "CANCEL") {end_media_session();}; if (loose_route()) { if (method=="INVITE" || method=="ACK") {use_media_proxy();}; t_relay(); break; }; # Force subsequent messages to pass trough this proxy if (method == "INVITE") {record_route();}; if (client_nat_test("3") && !search("^Record-Route:")) {force_rport();fix_contact(); }; if (method=="INVITE") { t_on_reply("1"); }; if (!lookup("location")) { sl_send_reply("404", "User not found"); break; }; if (method=="INVITE" || method=="ACK") { use_media_proxy(); }; if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error();}; } failure_route[1] { end_media_session(); } onreply_route[1] { if (status=~"(183)|(2[0-9][0-9])") { if (client_nat_test("1")) { fix_contact(); }; use_media_proxy(); }; } Regards, Ashutosh Kumar Chetu, Inc.

1 0

Re: [Serusers] Logs in mysql
by Iqbal 05 Aug '05

05 Aug '05

Hi Just to get this straight, you want to add logging to Mysql, if yes, have to edited the Makefile, in the /modules/acc/ directory, by default it allows logging with Radius, you need to comment out that line, and uncomment the mysql line. If this is done, then if you follow the docs in onsip.org, you will get logging into mysql. Also post a copy of ur ser.cfg file, so that we can take a look Iqbal Hernando Maisano wrote: > Thank you very much, it lowers east file to me: > http://www.onsip.org/modules/mydownloads/singlefile.php?cid=7&lid=26 > and raises the "SER" but it gives errors me, and I had q to remove a > pair from line. But what I want is to add log to base MYSQL.... and > there is no case. I am using RED HAT 7,3 with SER 0.8.12 > HELPP! > > Nando > ----- Original Message ----- From: "Iqbal" <iqbal(a)gigo.co.uk> > To: "Hernando Maisano" <nando(a)cps.com.ar> > Cc: <serusers(a)lists.iptel.org> > Sent: Friday, August 05, 2005 12:52 PM > Subject: Re: [Serusers] Logs in mysql > > >> goto www.onsip.org, there is a gettng started guide with mysql and >> all, it will be of use >> >> Iqbal >> >> Hernando Maisano wrote: >> >>> Hello, they recien I am beginning in the "SER" and the truth I am >>> lost. What I need to do now is to leave a registry of the calls, but >>> in MYSQL? Somebody can help me..... Thanks >>> PS: pardon my pesimo Ingles but I am of Latinoamerica >>> Nando >>> >>> ------------------------------------------------------------------------ >>> >>> >>> _______________________________________________ >>> Serusers mailing list >>> serusers(a)lists.iptel.org >>> http://lists.iptel.org/mailman/listinfo/serusers >>> > > > . >

2 3

[Serusers] Logs in mysql
by Hernando Maisano 05 Aug '05

05 Aug '05

Hello, they recien I am beginning in the "SER" and the truth I am lost. What I need to do now is to leave a registry of the calls, but in MYSQL? Somebody can help me..... Thanks PS: pardon my pesimo Ingles but I am of Latinoamerica Nando

2 2

[Users] PSTN Interconnect Advice
by Adam Sherman 05 Aug '05

05 Aug '05

I'd like some advice. What are people doing for PSTN connectivity when using third-party gateways? - For outbound, lcr with the uac module for authentication seems to be the way. - For inbound, either getting the providers to route DIDs directly using SRV or using sipsak to REGISTER seems to be a possibility. For DIDs, just using aliases to push the call to a user? Thanks, A. -- Adam Sherman Technologist

3 6

[Serusers] ERROR: fifo_server fgets failed: Illegal seek
by Ashutosh Kumar 05 Aug '05

05 Aug '05

Hi, I am a newbie to this user group and would like to have some urgent assistance regarding the following error. I am running ser-0.8.14 with nathelper and mediaproxy. The problem I am facing is that after I disconnect my first call, or cancel a RING, or upon a BYE, the following message is encountered and SER crashes. --------- 0(3970) ERROR: build_res_buf_from_sip_req: out of memory ; needs 745 0(3971) ERROR: sl_reply_error used: I'm terribly sorry, server error occured (1/SL) 0(3972) check_via_address(61.16.236.34, 192.168.11.37, 0) 2(3975) ERROR: fifo_server fgets failed: Illegal seek -------------- Any help will be highly appreciated Regards, Ashutosh

2 1

[Serusers] [Partially OffTopic] - Tekelec acquisition of Iptelorg...
by Pietro Ravasio 05 Aug '05

05 Aug '05

Hi all, Sorry for posting an offtopic message, but, considering the discussion that went on during the openser/ser development forking, what should we (ser users) expect after Tekelc acquisition of iptelorg? Cfr.: http://www.tekelec.com/news/prdetail.asp?prnum=543 Regards, Pietro -- Ing. Pietro Ravasio - pietro.ravasio(a)abbeynet.it Enterprise Market Manager Abbeynet S.p.A. - http://www.abbeynet.it TEL: +390702109044 GSM: +393282172055 FAX: +390702109055

3 2

[Users] Determining if User Exists
by Adam Sherman 05 Aug '05

05 Aug '05

In order to forward calls to voicemail when the user is not registered, I need to check if the user exists in the subscriber database. How can I do that? Thanks, A. -- Adam Sherman Technologist

2 5

[Serusers] SER installation on OpenBSD 3.7
by Fulvio Picecchi 05 Aug '05

05 Aug '05

Hi all, I'm a newbie and I'm having trouble with the installation of SER 0.8.10 package on OpenBSD 3.7. The package is the one available here: http://www.openbsd.org/3.7_packages/i386.html After a pkg_add ftp://ftp.openbsd.org/pub/OpenBSD/3.7/packages/i386/ser-0.8.10.tgz I've copied the example ser.cfg to /etc/ser.cfg and then I've tried a simple: /usr/local/sbin/ser But this is the output: /usr/local/sbin/ser:/usr/local/lib/ser/modules/sl.so: undefined symbol 'mem_lock' /usr/local/sbin/ser: /usr/local/lib/ser/modules/sl.so: can't resolve reference 'mem_lock' /usr/local/sbin/ser:/usr/local/lib/ser/modules/sl.so: undefined symbol 'process_no' /usr/local/sbin/ser: /usr/local/lib/ser/modules/sl.so: can't resolve reference 'process_no' /usr/local/sbin/ser:/usr/local/lib/ser/modules/sl.so: undefined symbol 'mem_block' ... ... ... Aug 5 17:16:33 zeus ser: parse error (95,36-37): unknown command, missing loadmodule? Aug 5 17:16:33 zeus ser: parse error (95,36-37): unknown command, missing loadmodule? Aug 5 17:16:33 zeus ser: parse error (100,15-16): unknown command, missing loadmodule? Aug 5 17:16:33 zeus ser: parse error (100,15-16): unknown command, missing loadmodule? Aug 5 17:16:33 zeus ser: parse error (101,18-19): unknown command, missing loadmodule? Aug 5 17:16:33 zeus ser: parse error (101,18-19): unknown command, missing loadmodule? ERROR: bad config file (16 errors) Thanks for any suggestion Fulvio

1 0

[Serusers] CLIR/CLIP
by Anders Hansson 05 Aug '05

05 Aug '05

Hi, Does anyone know if is possible to use CLIR/CLIP using SER connected to PSTN without help from other instance? To present the incoming number on the phone connected to SER is no problem, neither when calling internal numbers. But when calling eternal PSTN numbers the IP telephone number is not showing on the terminating side. Anyone got any idea or explanation? Thanks, Anders

2 1

Re: [Serusers] RTPProxy issues with G729 at different frame lengths
by Noel Sharpe 05 Aug '05

05 Aug '05

Andres wrote: > Noel Sharpe wrote: > > By the way, if you are using Asterisk as your gateway, there is no way > to modify G729 frame size via a config file. It is fixed at 20ms. > You should use 20ms on all your UAs. If you need to hardcode it to > something else, I can lookup my notes and let you know. > > Cheers > I'm using Asterisk as a b2bua, so I guess that is where the problem is. It does however work when the frames are > 20ms - infact I get the best quality when I use 40ms. I will post to the Asterisk list and let the list know what I find out. Thanks.

1 0

RE: [Serusers] ser start up
by Sam Lee 05 Aug '05

05 Aug '05

Are u using Digest Auth ? ________________________________ From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Chia Huey Lim Sent: Friday, August 05, 2005 4:13 PM To: serusers(a)lists.iptel.org Subject: [Serusers] ser start up Hi, I have a situation where the SER is only doing registration and proxy, where else ASTERISK is handling all the call switching behind (UA to UA as well as UA to pstn) I am combining registration and proxy to be handled by one SER, only handling around 650 users at this stage. However when I reboot the server and start SER, it takes around 10 minutes just for binding user and then handle registration, during that period, no UA can make any outgoing call though they are already registered. After the registration is settling down, only then UA can make outgoing call. And after that, periodically, there will be a time where the SER is very busy with registration and no outgoing call can be made again... Most of the UA expiry value is 20 minutes. Is that normal? Or which area I shall look into? Is it advisable to separate registration and proxy into 2 SER? Thanks in advance for the advice. Regards, Chia

2 1

[Users] Stability, and -DF_MALLOC
by Kanakatti M. Subramanya 05 Aug '05

05 Aug '05

I'm running 0.9.5, on my system, and *have* to comment out -DF_MALLOC (and uncomment -DDBG_QM_MALLOC) to have the system be stable. It pretty much always crashes when trying to do save("location") Anyone else seen this? List of modules is loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/acc.so" loadmodule "/usr/local/lib/openser/modules/exec.so" loadmodule "/usr/local/lib/openser/modules/group.so" loadmodule "/usr/local/lib/openser/modules/nathelper.so" loadmodule "/usr/local/lib/openser/modules/mediaproxy.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/uri_db.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/domain.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/options.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/lcr.so"

3 5

[Serusers] ser start up
by Chia Huey Lim 05 Aug '05

05 Aug '05

Hi, I have a situation where the SER is only doing registration and proxy, where else ASTERISK is handling all the call switching behind (UA to UA as well as UA to pstn) I am combining registration and proxy to be handled by one SER, only handling around 650 users at this stage. However when I reboot the server and start SER, it takes around 10 minutes just for binding user and then handle registration, during that period, no UA can make any outgoing call though they are already registered. After the registration is settling down, only then UA can make outgoing call. And after that, periodically, there will be a time where the SER is very busy with registration and no outgoing call can be made again. Most of the UA expiry value is 20 minutes. Is that normal? Or which area I shall look into? Is it advisable to separate registration and proxy into 2 SER? Thanks in advance for the advice. Regards, Chia

1 0

[Serusers] Why BYE doesn't accounted?
by Ryan Pagquil 05 Aug '05

05 Aug '05

Guys, Iv'e configured my SER to authenticate with freeradius, well thanks everybody. Yesterday I tried to make mysql accounting and it worked but the problem is when I hungup I can't see the BYE on the accounting, I only see INVITE and ACK. What should be the problem with my ser.cfg? Here is the configuration specifically with mysql accounting: modparam("acc", "log_flag", 1) modparam("acc", "log_level", 1) modparam("acc", "report_ack", 1) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "failed_transactions", 1) modparam("acc", "report_cancels", 1) modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 3) <<other stuff>> if (method=="INVITE" || method=="BYE") record_route(); setflag(1); <<other stuff>> Please help. Thanks, -- Ryan Pagquil Infodyne Inc. - PhilOnline.com 3603 Antel Global Corporate Center Doña Julia Vargas Ave. Ortigas Center Pasig City Tel: 687-0715 Web: www.philonline.com

1 0

RE: [Serusers] Problem with SER and PAP2, I get a 407 message when trying a call
by Sam Lee 05 Aug '05

05 Aug '05

What exactly is the problem? I got a similar set up.... Regards, Sam -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Yiannis Martis Sent: Thursday, August 04, 2005 4:11 PM To: jiri(a)iptel.org; sisalem(a)iptel.org; serusers(a)lists.iptel.org Subject: [Serusers] Problem with SER and PAP2,I get a 407 message when trying a call Hello there, I am Network Administrator working for a company called Hellasfon Network S.A. I use SER 0.9.3 with Vovida's STUN server. PAP2 UAis NATed and gets registered using my ADSL modem's IP and everything looks OK. The problem is when I try to make a call to another UA) of my service I get the following output from my server (ngrep):. Please help me if u can!!! U 2005/08/03 13:55:57.380953 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 INVITE sip:2810318308@XXXXXXXXXX.com SIP/2.0. Record-Route: <sip:XX.XX.XX.XX;ftag=7ab32f2bbf2689feo0;lr=on>. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport=5060. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 INVITE. Max-Forwards: 16. Contact: <sip:2810300308@XX.XX.XX.XX:5060>. Expires: 240. User-Agent: Linksys/PAP2-2.0.12(LS). Content-Length: 420. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. Content-Type: application/sdp. . v=0. o=- 13486 13486 IN IP4 XX.XX.XX.XX. s=-. c=IN IP4 XX.XX.XX.XX. t=0 0. m=audio 16420 RTP/AVP 18 0 2 4 8 96 97 98 100 101. a=rtpmap:18 G729a/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:4 G723/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:96 G726-40/8000. a=rtpmap:97 G726-24/8000. a=rtpmap:98 G726-16/8000. a=rtpmap:100 NSE/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:30. a=sendrecv. # U 2005/08/03 13:55:57.381212 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 SIP/2.0 407 Proxy Authentication Required. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport=5060. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a17 9. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 INVITE. Proxy-Authenticate: Digest realm="XXXXXXXXXX.com", nonce="42f0a3e9ea677d46038bdbeccaf8d95c18bce58e". Server: Sip EXpress router (0.9.3 (i386/linux)). Content-Length: 0. Warning: 392 XX.XX.XX.XX:5060 "Noisy feedback tells: pid=4360 req_src_ip=XX.XX.XX.XX req_src_port=5060 in_uri=sip:2810318308@XXXXXXXXXX.com out_uri=sip:2810318308@XXXXXXXXXX.com via_cnt==2". . # U 2005/08/03 13:55:57.381353 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 ACK sip:2810318308@XXXXXXXXXX.com SIP/2.0. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. Call-ID: b521746f-5119658a(a)192.168.1.2. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a17 9. CSeq: 102 ACK. User-Agent: Sip EXpress router(0.9.3 (i386/linux)). Content-Length: 0. . # U 2005/08/03 13:55:57.664069 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 ACK sip:2810318308@XXXXXXXXXX.com SIP/2.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a17 9. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 ACK. Max-Forwards: 70. Proxy-Authorization: Digest username="2810300308",realm="XXXXXXXXXX.com",nonce="42f0a3e8f78926d70014 0a7c490f06dd965ea748",uri="sip:2810318308@XXXXXXXXXX.com",algorithm=MD5, response="ac73134a0de530d527cfbe4fe1903707". Contact: <sip:2810300308@XX.XX.XX.XX:5060>. User-Agent: Linksys/PAP2-2.0.12(LS). Content-Length: 0. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

Re: [Serusers] lookup 2 uri
by Richard Z 05 Aug '05

05 Aug '05

The issue is that the locationis not always the same. I will try to fool around the register message and save function to see if there is a way to make it work. Richard On 8/3/05, Samuel Osorio Calvo <samuel.osorio(a)nl.thalesgroup.com> wrote: > If you know in advance the IP of 1002 and it is static, you can use serctl to add it's contact. This way doing a lookup("location") for 1003 will return both contacts...it's not a nice solution but it whould work. > > Samuel. > > Unclassified. > >>> Richard Z <rzheng(a)gmail.com> 08/03/05 08:55PM >>> > Hi Samuel, > > That's a very good detailed explanation! That's exactly what happened. > In my existing config, I have the logic to deal with the second ring > to 1003(a)test.com. It forks to itself and creates another ser > transaction. I'd like to make it simpler by doing it in a single > transaction. > > One way I am thinking about, but haven't tried yet, is when 1003 > registers, ser adds its location to both 1002 and 1003. So when ser > does lookup("location") for 1002, the real location for 1003 shows up. > Not sure that it is feasible. > > Thanks, > Richard > > > > On 8/2/05, Samuel Osorio Calvo <samuel.osorio(a)nl.thalesgroup.com> wrote: > > Just one remark: only one of the two URI will be translated to the contact. > > > > I'll try to explain... > > > > imagine the incoming Req-URI is 1001(a)test.com. When it passes the first lookup, > > lookup("aliases"); > > SER will retrieve the two aliases and put one of them as the new req-uri and the other as branch. > > Req-URI: 1002(a)test.com > > branch: 1003(a)test.com > > Doing the second lookup, > > lookup("location"); > > will put the contact of 1002(a)test.com as Req-URI (if more than one contact is present, the subsequent bindings will be added as branches) and the 1003(a)test.com will be left as branch untouched. > > Req-URI: 1002(a)10.1.1.102 > > branch: 1003(a)test.com > > This happens because lookup() only takes as input the req-URI. > > > > The result is that SER makes a DNS query for test.com, to send the request to 1003(a)test.com, instead of the end-point. If the DNS is properly configured, test.com should point to SER itself, making SER sending the message to itself via the network. Depending on the config file, it can work but you should check the logs to see what is exactly happening. > > User 1002 will get the message without any problem. > > > > NOTE: depending on the order in the database, 1003 and 1002 can exchange roles in upper explanation. > > > > As SER is now coded, above can not be changed (as far as I know).... > > > > Hope it helps, > > > > Samuel. > > > > Unclassified. > > > > >>> "Zeus Ng" <zeus.ng(a)isquare.com.au> 08/03/05 01:51AM >>> > > You would need two steps here, looup("aliases"), then lookup("location"). > > > > Zeus > > > > > -----Original Message----- > > > From: serusers-bounces(a)lists.iptel.org > > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Richard Z > > > Sent: Wednesday, 3 August 2005 3:33 AM > > > To: Atle Samuelsen > > > Cc: serusers(a)lists.iptel.org > > > Subject: Re: [Serusers] lookup 2 uri > > > > > > > > > Hi Atle, > > > > > > Alias doesn't replace uri with its real location. I'd like to use > > > lookup("location") to find out its real location. For > > > example, if 102(a)test.com is at 102(a)10.1.1.102 and > > > 103(a)test.com is at 103(a)10.1.1.103. I'd like to replace all > > > uris with 102(a)10.1.1.102 and 103(a)10.1.1.103 in a single ser > > > transaction logic. Would it be possible? > > > > > > Thanks, > > > Richard > > > > > > > > > On 8/1/05, Atle Samuelsen <clona(a)camaro.no> wrote: > > > > > > > > Hi, > > > > > > > > you could do something like : > > > > > > > > serctl alias add 101 sip:102@test.com > > > > serctl alias add 101 sip:103@test.com > > > > > > > > This way the invite would be forked to both 102 and 103, > > > > > > > > just remember to have both lookup("aliases"); and > > > save("aliases"); in > > > > your config at the right spot :-) > > > > > > > > -Atle > > > > > > > > > > > > > > > > * Richard Z <rzheng(a)gmail.com> [050802 04:34]: > > > > > Hi, > > > > > > > > > > I am trying to implement a feature to ring two ip phones > > > > > simultaneously. For example, when I call 101(a)test.com, it > > > rings both > > > > > 101(a)test.com and 102(a)test.com. In this case, the ruri is > > > > > 101(a)test.com. I can use append_branch 102(a)test.com, but > > > is there a > > > > > way to lookup the locations of both 101 and 102? > > > > > > > > > > Thanks, > > > > > Richard > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > _______________________________________________ > > > Serusers mailing list > > > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > >

1 0

[Serusers] SER and Cisco 1760V /w VIC2 2BRI-NT/TE
by Antanas Masevicius 04 Aug '05

04 Aug '05

Hello, does enyone had any experiance trying to run cisco router with 2BRI-NT/TE voip NIC with SER? I wonder if it is possible at least. I also didn't found how cisco should send sip-password to SER. Antanas

2 1

[Serusers] What is unique to a call in acc database table??
by Eric Haskins 04 Aug '05

04 Aug '05

here are a few sip_callid's from the ACC table they are all from the same user. This is being used in a prepaid outgoing only. 855d2882-32ae277b(a)192.168.1.100 7cd4ca18-5abe85b0(a)192.168.1.100 We are using same ATA adapter for these calls. I just wanted to confirm this is unique to each call or I may have to write something to export info Eric

1 0

[Users] force_rtp_proxy() problem.
by Ray Van Dolson 04 Aug '05

04 Aug '05

Thanks for the help earlier Bogdan. I've gotten things working for the most part, but am having a problem with the force_rtp_proxy function. Once again, here is my setup: SIP ATA - 10.0.201.196 OpenSER - eth0: 208.208.53.5/24 - eth1: 10.0.201.5/24 Asterisk - eth0: 65.234.34.5/24 - eth1: 10.0.201.6/24 Yes, Asterisk and OpenSER are on the same Private network currently. This is just for testing as clients were originally connecting directly to Asterisk. It will not always be the case. I have registration working correctly. If my SIP ATA makes an outbound call (INVITE) it appears to inform Asterisk in its SDP payload that media traffic (RTP) should be sent back to 10.0.201.5 (on eth1). Asterisk has no problem with this since it also has an IP on the 10.0.201.0/24 network. However this obviously will not always be the case. I want media (RTP) to travel back via the eth0 IP addresses. I've tried the following: force_rtp_proxy("", "208.208.53.5") To hopefully force my media address to be the IP on eth0 on OpenSER. However, calls no longer succeed and I see the following in the SDP payload now: v=0 o=- 1298429 1298429 IN IP4 10.0.201.196 s=- c=IN IP4 208.208.53.510.0.201.5 t=0 0 m=audio 3508835088 RTP/AVP 0 2 4 8 18 96 97 98 100 101 a=rtpmap:0 PCMU/8000 a=rtpmap:2 G726-32/8000 a=rtpmap:4 G723/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:18 G729a/8000 a=rtpmap:96 G726-40/8000 a=rtpmap:97 G726-24/8000 a=rtpmap:98 G726-16/8000 a=rtpmap:100 NSE/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-15 a=ptime:30 a=sendrecv a=direction:active a=nortpproxy:yes a=nortpproxy:yes As you can see, the info in c= has both IP's and they are not seperate by a space. This same phenomenon occurs even if I use force_rtp_proxy by itself or with any of the flags. Normally there is just one IP address in this field it seems. Is this a bug in force_rtp_proxy or am I doing something incorrectly? Thanks! -- Ray Van Dolson Linux/Unix Systems Administrator Digital Path, Inc.

3 6

[Serusers] What is unique to a call in acc database table??
by Eric Haskins 04 Aug '05

04 Aug '05

We are currently working on our Billing system and I was looking over our SER database and noticed sip_callid appeared to be unique to each call but when I looked back in the database I saw a bunch that appeared to be the same??? They were notify messages is this common or do I have to devise a different method? We have the hardest part done that calculates call price by Country Code , City Code, customer assigned rate or default Wholesale/Retail rate. We had it completed when running SanSay Equipment and we were told to make it work with SER. Eric Haskins Lead Software Developer v1010 (954) 272-4961 ext. 206 (727) 239-3823 Cell eric(a)merchant2020.com

2 1

[Users] PostgreSQL Version of "sc"
by Adam Sherman 04 Aug '05

04 Aug '05

There is a nice little script in sip-server/scripts/sc that allows for managing many of the tables. Has anyone done the necessary tweaking to port it to PostgreSQL? Thanks, A. -- Adam Sherman Technologist

3 2

[Serusers] route loop quandary
by Daniel Poulsen 04 Aug '05

04 Aug '05

I am having a problem with calls that are parallel forked. The problem happens when a call comes in, gets forked using multiple aliases and one UA is unavailable. The question is, how do I handle the offline call leg? I can't do if (!lookup("location")) { break; (or sl_send_reply("404") } because then the whole call dies since each branch of the call uses the same callid. If I t_relay them both, then the fork works but I the offline leg gets repeatedly relayed unltil I get a 483 "Too many hops". This scenario would be OK [althought certainly not ideal], except it does not allow me to add a condition to hunt to the next number upon a failed lookup("location"). If I do, the online UA will ring once and the offline UA will get routed immediately to voicemail which picks up after just one ring. How are other handling these problems? I think the answer lies in letting failure_route handle everything, but I don't know how to get that to work because if I don't handle the offline users in the (!lookup("location"), I end up with routing loops and eventualluy a 483. Anybody that has no online contacts whatsoever never makes it to failure_route (where the forward to VM is handled). Below is my ser.cfg. I've been playing around with things like if (isflagset(6)) { route(x) } but I still need some way to handle the failed portion of the fork. Is there a way to "null route" the failed portion or something? route { /* Registration and other logic snipped for brevity */ # Translate local address according to aliases table xlog("L_INFO", "%ci: Preparing to look up alias for %ru\n"); if(lookup("aliases")) { xlog("L_NOTICE", "%ci: alias lookup changed uri to %ru\n"); if (!(uri==myself)) { xlog("L_NOTICE", "%ci: Outbound aliases %ru\n"); route(4); break; }; }; if ( (uri=~"^sip:411@.*") | (uri=~"^sip:911@.*") | (uri=~"^sip:011[0-9]+@.*") | (uri=~"^sip:1[0-9]{10}@.*") ) { route(3); # 3: PSTN with authentication break; }; # Anything left is a local call. xlog("L_INFO", "%ci: Preparing to look up location for %ru\n"); if (!lookup("location")) { xlog("L_NOTICE", "%ci: no location for %ru\n"); setflag(5); } else { # Had a sucessful lookup setflag(6); }; route(4); } route[4] { # If an invitation, we want to hunt on failure if(method == "INVITE") { t_on_failure("1"); # first hunt }; append_hf("P-hint: relay\r\n"); xlog("L_NOTICE", "%ci: r4: t_relay %ru\n"); if (!t_relay()) { xlog("L_NOTICE", "%ci: %ru r4: Relay Failed\n"); sl_reply_error(); break; }; } failure_route[1] { revert_uri(); route(7); } ### Handle hunt sequences.

1 1

[Users] Trouble with freshly compiled OpenSer0.9.5
by Martin Kjeldsen 04 Aug '05

04 Aug '05

Hi all I was wondering if any of you might have a solution to my problem! The thing is that i've compiled and installed OpenSer0.9.5 from CVS, on a SUSE 9.2, added MySQL support and created a DB for OpenSer. And now I'm stuck at executing openserctl start and only ending up with the PID filed getting created and ultimately deleted, when OpenSer terminates with the message "PID file /home/ser/var/run/openser.pid does not exist -- OpenSER start failed", and path to the PID has been altered in openserctl. I'm using debug mode 5 but cant realy figure out what might be causing this error! All help will be greatly appreciated. I have attached the output: (Sorry for the big post) ser@site1:~/running/openser/sbin> [21Popenserctl start Starting OpenSER : 0(14441) read 2733431526 from /dev/urandom 0(14441) seeding PRNG with 3856599290 0(14441) test random number 930545650 0(14441) loading module /home/ser/running/openser/lib/openser/modules/mysql.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/sl.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/tm.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/rr.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/maxfwd.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/usrloc.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/registrar.so 0(14441) loading module /home/ser/running/openser/lib/openser/modules/textops.so 0(14441) set_mod_param_regex: usrloc matches module usrloc 0(14441) set_mod_param_regex: found <db_url> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(14441) set_mod_param_regex: usrloc matches module usrloc 0(14441) set_mod_param_regex: found <db_mode> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(14441) set_mod_param_regex: rr matches module rr 0(14441) set_mod_param_regex: found <enable_full_lr> in module rr [/home/ser/running/openser/lib/openser/modules/rr.so] 0(14441) find_export: found <mf_process_maxfwd_header> in module maxfwd [/home/ser/running/openser/lib/openser/modules/maxfwd.so] 0(14441) find_export: found <sl_send_reply> in module sl_module [/home/ser/running/openser/lib/openser/modules/sl.so] 0(14441) find_export: found <sl_send_reply> in module sl_module [/home/ser/running/openser/lib/openser/modules/sl.so] 0(14441) find_export: found <record_route> in module rr [/home/ser/running/openser/lib/openser/modules/rr.so] 0(14441) find_export: found <loose_route> in module rr [/home/ser/running/openser/lib/openser/modules/rr.so] 0(14441) find_export: found <append_hf> in module textops [/home/ser/running/openser/lib/openser/modules/textops.so] 0(14441) find_export: found <append_hf> in module textops [/home/ser/running/openser/lib/openser/modules/textops.so] 0(14441) find_export: found <save> in module registrar [/home/ser/running/openser/lib/openser/modules/registrar.so] 0(14441) find_export: found <lookup> in module registrar [/home/ser/running/openser/lib/openser/modules/registrar.so] 0(14441) find_export: found <append_hf> in module textops [/home/ser/running/openser/lib/openser/modules/textops.so] 0(14441) find_export: found <lookup> in module registrar [/home/ser/running/openser/lib/openser/modules/registrar.so] 0(14441) find_export: found <sl_send_reply> in module sl_module [/home/ser/running/openser/lib/openser/modules/sl.so] 0(14441) find_export: found <append_hf> in module textops [/home/ser/running/openser/lib/openser/modules/textops.so] 0(14441) find_export: found <t_relay> in module tm [/home/ser/running/openser/lib/openser/modules/tm.so] 0(14441) find_export: found <sl_reply_error> in module sl_module [/home/ser/running/openser/lib/openser/modules/sl.so] 0(14441) routing table 0: 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x4027ffd0> 0(14441) , "10" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4027ffd0> 0(14441) , "10" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "483" 0(14441) , "Too Many Hops" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) UNKNOWN 0(14441) <UNKNOWN> 0(14441) 2048 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "513" 0(14441) , "Message too big" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4027c7c0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: rr-enforced " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) if ( 0(14441) UNKNOWN 0(14441) <UNKNOWN> 0(14441) 2048 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "513" 0(14441) , "Message too big" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4027c7c0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: rr-enforced " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4027c7c0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: rr-enforced " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) if ( 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4027a1c0> 0(14441) ); 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: rr-enforced " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) if ( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) { 0(14441) if ( 0(14441) method 0(14441) == 0(14441) "REGISTER" 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x4029bb30> 0(14441) , "location" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "aliases" 0(14441) ); 0(14441) if ( 0(14441) NOT( 0(14441) uri 0(14441) == 0(14441) _myself_ 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: outbound alias " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x40298490> 0(14441) , "location" 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170910> 0(14441) , "404" 0(14441) , "Not Found" 0(14441) ); 0(14441) drop( 0(14441) type<0> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) } else { 0(14441) }; 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x402a1450> 0(14441) , "P-hint: usrloc applied " 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) route( 0(14441) 1 0(14441) ); 0(14441) 0(14441) routing table 1: 0(14441) if ( 0(14441) NOT( 0(14441) external_module_call( 0(14441) f_ptr<0x4024c740> 0(14441) ); 0(14441) external_module_call( 0(14441) f_ptr<0x4024c740> 0(14441) ); 0(14441) ) 0(14441) ) { 0(14441) external_module_call( 0(14441) f_ptr<0x40170580> 0(14441) ); 0(14441) } else { 0(14441) }; 0(14441) Listening on udp: 212.97.202.73 [212.97.202.73]:5060 tcp: 212.97.202.73 [212.97.202.73]:5060 Aliases: tcp: osite1:5060 tcp: osite1.cuatro.dk:5060 udp: osite1:5060 udp: osite1.cuatro.dk:5060 WARNING: no fork mode 0(14441) shm_mem_init: success 0(0) core dump limits set to 4294967295 0(0) DEBUG: init_mod: sl_module stateless - initializing 0(0) DEBUG: register_fifo_cmd: new command (sl_stats) registered 0(0) unixsock_register_cmd: New command (sl_stats) registered 0(0) DEBUG: MD5 calculated: ba950484b7cb9e0b78ff4f84c7272d40 0(0) DEBUG: init_mod: tm 0(0) TM - (size of cell=2780, sip_msg=760) initializing... 0(0) Call-ID initialization: '773ffe9e' 0(0) DEBUG: register_fifo_cmd: new command (t_uac_dlg) registered 0(0) DEBUG: register_fifo_cmd: new command (t_uac_cancel) registered 0(0) DEBUG: register_fifo_cmd: new command (t_hash) registered 0(0) DEBUG: register_fifo_cmd: new command (t_reply) registered 0(0) unixsock_register_cmd: New command (t_uac_dlg) registered 0(0) unixsock_register_cmd: New command (t_uac_cancel) registered 0(0) unixsock_register_cmd: New command (t_hash) registered 0(0) unixsock_register_cmd: New command (t_reply) registered 0(0) DEBUG: lock_initialize: lock initialization started 0(0) DEBUG: register_fifo_cmd: new command (t_stats) registered 0(0) unixsock_register_cmd: New command (t_stats) registered 0(0) DEBUG: MD5 calculated: 5818e8718167640aef9d06ecea0d94fe 0(0) DEBUG: MD5 calculated: 55629ad9d6de7376eb3d3c6f0e1dea9c 0(0) DEBUG: init_mod: rr 0(0) rr - initializing 0(0) DEBUG: init_mod: maxfwd 0(0) Maxfwd module- initializing 0(0) DEBUG: init_mod: usrloc 0(0) usrloc - initializing 0(0) DEBUG: register_fifo_cmd: new command (ul_stats) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_rm) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_rm_contact) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_dump) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_flush) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_add) registered 0(0) DEBUG: register_fifo_cmd: new command (ul_show_contact) registered 0(0) unixsock_register_cmd: New command (ul_stats) registered 0(0) unixsock_register_cmd: New command (ul_rm) registered 0(0) unixsock_register_cmd: New command (ul_rm_contact) registered 0(0) unixsock_register_cmd: New command (ul_dump) registered 0(0) unixsock_register_cmd: New command (ul_flush) registered 0(0) unixsock_register_cmd: New command (ul_add) registered 0(0) unixsock_register_cmd: New command (ul_show_contact) registered 0(0) find_mod_export: found <db_use_table> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_init> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_close> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_query> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_raw_query> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_free_result> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_insert> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_delete> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) find_mod_export: found <db_update> in module mysql [/home/ser/running/openser/lib/openser/modules/mysql.so] 0(0) DEBUG: init_mod: registrar 0(0) registrar - initializing 0(0) find_export: found <sl_send_reply> in module sl_module [/home/ser/running/openser/lib/openser/modules/sl.so] 0(0) find_export: found <ul_bind_usrloc> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_register_udomain> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_get_all_ucontacts> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_insert_urecord> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_delete_urecord> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_get_urecord> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_lock_udomain> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_unlock_udomain> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_release_urecord> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_insert_ucontact> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_delete_ucontact> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_get_ucontact> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_update_ucontact> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_register_watcher> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_unregister_watcher> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) find_export: found <ul_register_ulcb> in module usrloc [/home/ser/running/openser/lib/openser/modules/usrloc.so] 0(0) DEBUG: init_mod: textops textops - initializing 0(0) fixing /home/ser/running/openser/lib/openser/modules/maxfwd.so mf_process_maxfwd_header 0(0) fixing /home/ser/running/openser/lib/openser/modules/sl.so sl_send_reply 0(0) fixing /home/ser/running/openser/lib/openser/modules/sl.so sl_send_reply 0(0) fixing /home/ser/running/openser/lib/openser/modules/rr.so record_route 0(0) fixing /home/ser/running/openser/lib/openser/modules/rr.so loose_route 0(0) fixing /home/ser/running/openser/lib/openser/modules/textops.so append_hf 0(0) fixing /home/ser/running/openser/lib/openser/modules/textops.so append_hf 0(0) fixing /home/ser/running/openser/lib/openser/modules/registrar.so save 0(0) get_connection(): Connection not found in the pool 0(0) preload_udomain(): Table is empty 0(0) release_connection(): Removing connection from the pool 0(0) fixing /home/ser/running/openser/lib/openser/modules/registrar.so lookup 0(0) get_connection(): Connection not found in the pool 0(0) preload_udomain(): Table is empty 0(0) release_connection(): Removing connection from the pool 0(0) fixing /home/ser/running/openser/lib/openser/modules/textops.so append_hf 0(0) fixing /home/ser/running/openser/lib/openser/modules/registrar.so lookup 0(0) fixing /home/ser/running/openser/lib/openser/modules/sl.so sl_send_reply 0(0) fixing /home/ser/running/openser/lib/openser/modules/textops.so append_hf 0(0) fixing /home/ser/running/openser/lib/openser/modules/tm.so t_relay 0(0) fixing /home/ser/running/openser/lib/openser/modules/sl.so sl_reply_error 0(0) INFO: udp_init: SO_RCVBUF is initially 111616 0(0) DEBUG: udp_init: trying SO_RCVBUF: 223232 0(0) DEBUG: setting SO_RCVBUF; set=223232,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 225280 0(0) DEBUG: setting SO_RCVBUF; set=225280,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 227328 0(0) DEBUG: setting SO_RCVBUF; set=227328,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 229376 0(0) DEBUG: setting SO_RCVBUF; set=229376,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 231424 0(0) DEBUG: setting SO_RCVBUF; set=231424,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 233472 0(0) DEBUG: setting SO_RCVBUF; set=233472,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 235520 0(0) DEBUG: setting SO_RCVBUF; set=235520,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 237568 0(0) DEBUG: setting SO_RCVBUF; set=237568,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 239616 0(0) DEBUG: setting SO_RCVBUF; set=239616,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 241664 0(0) DEBUG: setting SO_RCVBUF; set=241664,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 243712 0(0) DEBUG: setting SO_RCVBUF; set=243712,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 245760 0(0) DEBUG: setting SO_RCVBUF; set=245760,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 247808 0(0) DEBUG: setting SO_RCVBUF; set=247808,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 249856 0(0) DEBUG: setting SO_RCVBUF; set=249856,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 251904 0(0) DEBUG: setting SO_RCVBUF; set=251904,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 253952 0(0) DEBUG: setting SO_RCVBUF; set=253952,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 256000 0(0) DEBUG: setting SO_RCVBUF; set=256000,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 258048 0(0) DEBUG: setting SO_RCVBUF; set=258048,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 260096 0(0) DEBUG: setting SO_RCVBUF; set=260096,verify=262142 0(0) DEBUG: udp_init: trying SO_RCVBUF: 262144 0(0) DEBUG: setting SO_RCVBUF; set=262144,verify=262142 0(0) DEBUG: setting SO_RCVBUF has no effect 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) DBG: open_uac_fifo: opening fifo... 0(0) DEBUG: FIFO created @ /tmp/openser_fifo 0(0) DEBUG: fifo /tmp/openser_fifo opened, mode=777 0(0) ERROR: init_fifo_server: fifo_write did not open: Permission denied 0(0) initializing fifo server failed 0(0) DEBUG: tm_shutdown : start 0(0) DEBUG: unlink_timer_lists : emptying DELETE list 0(0) DEBUG: tm_shutdown : emptying hash table 0(0) DEBUG: tm_shutdown : releasing timers 0(0) DEBUG: tm_shutdown : removing semaphores 0(0) DEBUG: tm_shutdown : destroying tmcb lists 0(0) DEBUG: tm_shutdown : done 0(14441) shm_mem_destroy 0(14441) destroying the shared memory lock PID created! total 0 PID file /home/ser/var/run/openser.pid does not exist -- OpenSER start failed Kind regards Martin

2 3

[Users] regexp problem
by Klaus Darilion 04 Aug '05

04 Aug '05

Hi! I have a problem with search(); I try to match a contact header with IP address: if !(search("Contact:.*@[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+:")) { works fine, whereas if !(search("Contact:.*@[0-9]+\.[0-9]+\.[0-9]+\.\d+:")) { does not work. ^^ Looks like search() does not like \d Are there any known limitations for the regular expressions? regards klaus

2 2

RE: SV: [Serusers] SER core dump on SuSE
by Pat wang 04 Aug '05

04 Aug '05

Thanks Roger, You are right. I reinstalled SuSE with all the available development packages cause I am not sure what else is needed if there are always something missing. SER works fine with authentication now. Thanks, Pat >From: "Roger Lewau" <roger.lewau(a)serverhallen.com> >To: "'Pat wang'" <wangyu39(a)hotmail.com>,<serusers(a)lists.iptel.org> >Subject: SV: [Serusers] SER core dump on SuSE >Date: Wed, 3 Aug 2005 19:01:08 +0200 > >Hi, > >Did you install a precompiled version of SER and modules? I had the exact >same problem on FreeBSD but solved it by downloading the source and compile >the mysql.so module by hand and then replacing the precompiled module. > >Dont know the exact reason for the crash I had, but the above step solved >it. Could be woth a try. > >Kind regards >Roger > > >-----Ursprungligt meddelande----- >Från: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] För >Pat >wang >Skickat: den 3 augusti 2005 17:53 >Till: serusers(a)lists.iptel.org >Ämne: [Serusers] SER core dump on SuSE > >Hi, > >I am having trouble running SER on SuSE Linux. SER crashes when >authentication module is used. Whenever a REGISTER arrives to SER, it gives >a core dump. If I turn authentication off then everything is fine. I have >tried this on different versions of SuSE including: 9.0 (2.4 Kernel) and >9.1 >and 9.3 (2.6 Kernel). They all give this core dump: > >Core was generated by `ser -E -w .'. >Program terminated with signal 11, Segmentation fault. > >warning: current_sos: Can't read pathname for load map: Input/output error > >Reading symbols from /lib/libdl.so.2...done. >Loaded symbols for /lib/libdl.so.2 >Reading symbols from /lib/libresolv.so.2...done. >Loaded symbols for /lib/libresolv.so.2 >Reading symbols from /lib/tls/libc.so.6...done. >Loaded symbols for /lib/tls/libc.so.6 >Reading symbols from /lib/ld-linux.so.2...done. >Loaded symbols for /lib/ld-linux.so.2 >Reading symbols from /usr/local/lib/ser/modules/mysql.so...done. >Loaded symbols for /usr/local/lib/ser/modules/mysql.so >Reading symbols from /usr/lib/libmysqlclient.so.12...done. >Loaded symbols for /usr/lib/libmysqlclient.so.12 Reading symbols from >/lib/libz.so.1...done. >Loaded symbols for /lib/libz.so.1 >Reading symbols from /lib/libcrypt.so.1...done. >Loaded symbols for /lib/libcrypt.so.1 >Reading symbols from /lib/libnsl.so.1...done. >Loaded symbols for /lib/libnsl.so.1 >Reading symbols from /lib/tls/libm.so.6...done. >Loaded symbols for /lib/tls/libm.so.6 >Reading symbols from /usr/local/lib/ser/modules/sl.so...done. >Loaded symbols for /usr/local/lib/ser/modules/sl.so Reading symbols from >/usr/local/lib/ser/modules/tm.so...done. >Loaded symbols for /usr/local/lib/ser/modules/tm.so Reading symbols from >/usr/local/lib/ser/modules/rr.so...done. >Loaded symbols for /usr/local/lib/ser/modules/rr.so Reading symbols from >/usr/local/lib/ser/modules/maxfwd.so...done. >Loaded symbols for /usr/local/lib/ser/modules/maxfwd.so >Reading symbols from /usr/local/lib/ser/modules/usrloc.so...done. >Loaded symbols for /usr/local/lib/ser/modules/usrloc.so >Reading symbols from /usr/local/lib/ser/modules/registrar.so...done. >Loaded symbols for /usr/local/lib/ser/modules/registrar.so >Reading symbols from /usr/local/lib/ser/modules/textops.so...done. >Loaded symbols for /usr/local/lib/ser/modules/textops.so >Reading symbols from /usr/local/lib/ser/modules/auth.so...done. >Loaded symbols for /usr/local/lib/ser/modules/auth.so >Reading symbols from /usr/local/lib/ser/modules/auth_db.so...done. >Loaded symbols for /usr/local/lib/ser/modules/auth_db.so >Reading symbols from /lib/libnss_files.so.2...done. >Loaded symbols for /lib/libnss_files.so.2 #0 qm_malloc (qm=0x80ffac0, >size=20) at q_malloc.c:290 >290 q_malloc.c: No such file or directory. > in q_malloc.c >(gdb) >(gdb) >(gdb) >(gdb) >(gdb) bt >#0 qm_malloc (qm=0x80ffac0, size=20) at q_malloc.c:290 >#1 0x4016322c in new_result () at res.c:199 >#2 0x40162035 in store_result (_h=0x8106138, _r=0xbfffee4c) at dbase.c:298 >#3 0x080998ec in table_version (dbf=0x4039b320, connection=0x8106138, >table=0xbfffeeb0) > at db.c:176 >#4 0x40398eaf in auth_db_ver (db_url=0x0, name=0x0) at authorize.c:337 >#5 0x40397fba in str_fixup (param=0x8106c30, param_no=2) at >authdb_mod.c:238 >#6 0x0806ec55 in fix_actions (a=<value optimized out>) at route.c:243 >#7 0x0806f136 in fix_expr (exp=0x8106c48) at route.c:134 >#8 0x0806f17e in fix_expr (exp=0x8106c78) at route.c:99 >#9 0x0806ed1b in fix_actions (a=<value optimized out>) at route.c:221 #10 >0x0806ed3e in fix_actions (a=<value optimized out>) at route.c:225 >#11 0x0806ed3e in fix_actions (a=<value optimized out>) at route.c:225 >#12 0x0806f026 in fix_rls () at route.c:726 >#13 0x0805df35 in main (argc=4, argv=0xbffff1b4) at main.c:1558 >(gdb) > >I have to use Redhat playing SER now. I am really appreciate if someone can >take a look at the cause. By the way, I tried to install SER from binary >package as well as compile from the source code, result is the same. > >Regards, > >Pat > > >_______________________________________________ >Serusers mailing list >serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] Segmentation fault-fifo_server fgets failed: Illegal seek
by Ashutosh Kumar 04 Aug '05

04 Aug '05

Hi , I am getting a segmentation fault when my sip server runs. It happens mostly when a client tries to call another client phone. I think that this has got something to do with ser_fifo file permissions. For that reason, the relevant code from my ser.cfg file is as belows; --------------- fifo="/tmp/ser_fifo" fifo_mode=0666 --------------- I am running SER-0.8.14.The debug trace is as produced below: 0(3972) check_self - checking if host==us: 15==15 && [sip.myownphone.com] == [sip. myownphone.com] 0(3972) check_self - checking if port 5060 matches port 5060 0(3972) rwrite(): Rewriting Request-URI with 'sip:satya@210.7.75.189:5060' 0(3972) DEBUG: t_addifnew: msg id=3 , global msg id=1 , T on entrance=0xffffffff 0(3972) parse_headers: flags=-1 0(3972) parse_headers: flags=60 0(3972) t_lookup_request: start searching: hash=13553, isACK=0 0(3972) DEBUG: RFC3261 transaction matching failed 0(3972) DEBUG: t_lookup_request: no transaction found 0(3972) DBG: callback type 2, id 3 entered 0(3972) DEBUG: t_lookupOriginalT: searching on hash entry 13553 0(3972) DEBUG: RFC3261 transaction matching failed 0(3972) DEBUG: t_lookupOriginalT: no CANCEL maching found! 0(3972) DEBUG: t_lookupOriginalT completed 0(3972) DEBUG: mk_proxy: doing DNS lookup... 0(3972) check_via_address(61.16.236.34, 192.168.11.37, 0) 2(3975) ERROR: fifo_server fgets failed: Illegal seek 2(3975) ERROR: fifo_server fgets failed: Illegal seek 2(3975) ERROR: fifo_server fgets failed: Illegal seek 2(3975) ERROR: fifo_server fgets failed: Illegal seek 2(3975) INFO: signal 15 received 2(3975) Memory status (pkg): 2(3975) fm_status (0x80c2c80): 2(3975) heap size= 1047440 2(3975) dumping free list: 2(3975) hash = 1 fragments no.: 11, bucket size: 8 - 8 (first 8) 2(3975) hash = 2 fragments no.: 2, bucket size: 16 - 16 (first 16) 2(3975) hash = 4 fragments no.: 1, bucket size: 32 - 32 (first 32) 2(3975) hash = 15 fragments no.: 1, bucket size: 120 - 120 (first 120) 2(3975) hash = 20 fragments no.: 3, bucket size: 160 - 160 (first 160) 2(3975) hash = 265 fragments no.: 1, bucket size: 524288 - 1048576 (first 1030944) 2(3975) TOTAL: 19 free fragments = 1031696 free bytes 2(3975) ----------------------------- 1(3974) INFO: signal 15 received 1(3974) Memory status (pkg): 1(3974) fm_status (0x80c2c80): 1(3974) heap size= 1047440 1(3974) dumping free list: 1(3974) hash = 1 fragments no.: 11, bucket size: 8 - 8 (first 8) 1(3974) hash = 2 fragments no.: 1, bucket size: 16 - 16 (first 16) 1(3974) hash = 4 fragments no.: 1, bucket size: 32 - 32 (first 32) 1(3974) hash = 6 fragments no.: 1, bucket size: 48 - 48 (first 48) 1(3974) hash = 8 fragments no.: 1, bucket size: 64 - 64 (first 64) 1(3974) hash = 20 fragments no.: 3, bucket size: 160 - 160 (first 160) 1(3974) hash = 32 fragments no.: 1, bucket size: 256 - 256 (first 256) 1(3974) hash = 78 fragments no.: 1, bucket size: 624 - 624 (first 624) 1(3974) hash = 265 fragments no.: 1, bucket size: 524288 - 1048576 (first 1030048) 1(3974) TOTAL: 21 free fragments = 1031656 free bytes 1(3974) ----------------------------- Segmentation fault Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

1 0

[Serusers] serweb 0.9.3 config on RedHat ES4
by Amit Rastogi 04 Aug '05

04 Aug '05

Hello, I am trying to install serweb 0.9.3 release. I already have ser 0.9.3 running with mysql support. When i try to access the http:<host>/serweb/admin.php, it displays a blank page and nothing else.. Here are the steps i have done so far.. untar package to <root>/serweb directory copy ./html to /var/www/html/serweb directory copy ./phplib to /var/www/phplib directory modified php.ini to have short_open_tag to on Added alias in httpd.conf as Alias /serweb/ "/var/www/html/serweb/" Quick install guide mentions modifying config_data_later.php, i am using the default username pass so i skipped it. changed config_paths.php -> root path is /serweb/ Can someone please help ? Thanks, Akr

3 2

Re: [Serusers] Implementing Codec Translator with Asterisk
by Noel Sharpe 04 Aug '05

04 Aug '05

Frank Kostin wrote: > > BTW, I heard that someone might need a licence for G.729 !? It's a proprietory codec, so yes you need a licence for each and every channel you transcode. If you want to support the transcoding of 100 simultaneous conversations, you need 100 licences. You don't need a licence to just use G729; you only need licences when you need to encode or decode using G729. If you use asterisk, you can purchase a licence from Digium.

1 0

Re: [Serusers] lookup 2 uri
by Samuel Osorio Calvo 04 Aug '05

04 Aug '05

If you know in advance the IP of 1002 and it is static, you can use serctl to add it's contact. This way doing a lookup("location") for 1003 will return both contacts...it's not a nice solution but it whould work. Samuel. Unclassified. >>> Richard Z <rzheng(a)gmail.com> 08/03/05 08:55PM >>> Hi Samuel, That's a very good detailed explanation! That's exactly what happened. In my existing config, I have the logic to deal with the second ring to 1003(a)test.com. It forks to itself and creates another ser transaction. I'd like to make it simpler by doing it in a single transaction. One way I am thinking about, but haven't tried yet, is when 1003 registers, ser adds its location to both 1002 and 1003. So when ser does lookup("location") for 1002, the real location for 1003 shows up. Not sure that it is feasible. Thanks, Richard On 8/2/05, Samuel Osorio Calvo <samuel.osorio(a)nl.thalesgroup.com> wrote: > Just one remark: only one of the two URI will be translated to the contact. > > I'll try to explain... > > imagine the incoming Req-URI is 1001(a)test.com. When it passes the first lookup, > lookup("aliases"); > SER will retrieve the two aliases and put one of them as the new req-uri and the other as branch. > Req-URI: 1002(a)test.com > branch: 1003(a)test.com > Doing the second lookup, > lookup("location"); > will put the contact of 1002(a)test.com as Req-URI (if more than one contact is present, the subsequent bindings will be added as branches) and the 1003(a)test.com will be left as branch untouched. > Req-URI: 1002(a)10.1.1.102 > branch: 1003(a)test.com > This happens because lookup() only takes as input the req-URI. > > The result is that SER makes a DNS query for test.com, to send the request to 1003(a)test.com, instead of the end-point. If the DNS is properly configured, test.com should point to SER itself, making SER sending the message to itself via the network. Depending on the config file, it can work but you should check the logs to see what is exactly happening. > User 1002 will get the message without any problem. > > NOTE: depending on the order in the database, 1003 and 1002 can exchange roles in upper explanation. > > As SER is now coded, above can not be changed (as far as I know).... > > Hope it helps, > > Samuel. > > Unclassified. > > >>> "Zeus Ng" <zeus.ng(a)isquare.com.au> 08/03/05 01:51AM >>> > You would need two steps here, looup("aliases"), then lookup("location"). > > Zeus > > > -----Original Message----- > > From: serusers-bounces(a)lists.iptel.org > > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Richard Z > > Sent: Wednesday, 3 August 2005 3:33 AM > > To: Atle Samuelsen > > Cc: serusers(a)lists.iptel.org > > Subject: Re: [Serusers] lookup 2 uri > > > > > > Hi Atle, > > > > Alias doesn't replace uri with its real location. I'd like to use > > lookup("location") to find out its real location. For > > example, if 102(a)test.com is at 102(a)10.1.1.102 and > > 103(a)test.com is at 103(a)10.1.1.103. I'd like to replace all > > uris with 102(a)10.1.1.102 and 103(a)10.1.1.103 in a single ser > > transaction logic. Would it be possible? > > > > Thanks, > > Richard > > > > > > On 8/1/05, Atle Samuelsen <clona(a)camaro.no> wrote: > > > > > > Hi, > > > > > > you could do something like : > > > > > > serctl alias add 101 sip:102@test.com > > > serctl alias add 101 sip:103@test.com > > > > > > This way the invite would be forked to both 102 and 103, > > > > > > just remember to have both lookup("aliases"); and > > save("aliases"); in > > > your config at the right spot :-) > > > > > > -Atle > > > > > > > > > > > > * Richard Z <rzheng(a)gmail.com> [050802 04:34]: > > > > Hi, > > > > > > > > I am trying to implement a feature to ring two ip phones > > > > simultaneously. For example, when I call 101(a)test.com, it > > rings both > > > > 101(a)test.com and 102(a)test.com. In this case, the ruri is > > > > 101(a)test.com. I can use append_branch 102(a)test.com, but > > is there a > > > > way to lookup the locations of both 101 and 102? > > > > > > > > Thanks, > > > > Richard > > > > > > > > _______________________________________________ > > > > Serusers mailing list > > > > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] t_uac_dlg pb
by mma 04 Aug '05

04 Aug '05

I want to send an invite request to ser's fifo using t_uac_dlg command and exec_msg, my pb is that i can't construct a valid invite header , when i check the log of ser, i see that there is errors in parsing headers. i'm trying to send something like this : cat > /tmp/ser_fifo << EOF :t_uac_dlg:hh INVITE sip: user2(a)sip.server.net . From: sip:user1@sip.server.net To: sip:user2@sip.server.net . Content-Type: application/sdp EOF please can someone correct it. Regards PS : the valid header is the following : Session Initiation Protocol Request-Line: INVITE sip:5001@sip.softiphone.net SIP/2.0 Message Header Via: SIP/2.0/UDP 192.168.1.100;branch=z9hG4bK52ffa6c1cda5b285 From: "5003" <sip:5003@sip.softiphone.net>;tag=81ee9e99dc30cc34 SIP Display info: "5003" SIP from address: sip:5003@sip.softiphone.net SIP tag: 81ee9e99dc30cc34 To: <sip:5001@sip.softiphone.net> SIP to address: sip:5001@sip.softiphone.net Contact: <sip:5003@192.168.1.100> Supported: replaces, timer Call-ID: b2d776f6e99851a4(a)192.168.1.100 CSeq: 44559 INVITE User-Agent: Grandstream GXP2000 1.0.1.9 Max-Forwards: 70 Allow: INVITE,ACK,CANCEL,BYE,NOTIFY,REFER,OPTIONS,INFO,SUBSCRIBE,UPDATE,PRACK Content-Type: application/sdp Content-Length: 310 Message body Session Description Protocol Session Description Protocol Version (v): 0 Owner/Creator, Session Id (o): 5003 8000 8000 IN IP4 192.168.1.100 Session Name (s): SIP Call Connection Information (c): IN IP4 192.168.1.100 Time Description, active time (t): 0 0 Media Description, name and address (m): audio 5004 RTP/AVP 0 8 18 3 4 101 Media Attribute (a): sendrecv Media Attribute (a): rtpmap:0 PCMU/8000 Media Attribute (a): rtpmap:8 PCMA/8000 Media Attribute (a): rtpmap:18 G729/8000 Media Attribute (a): rtpmap:3 GSM/8000 Media Attribute (a): rtpmap:4 G723/8000 Media Attribute (a): ptime:20 Media Attribute (a): rtpmap:101 telephone-event/8000 Media Attribute (a): fmtp:101 0-11

1 0

[Serusers] No stop record for pstn calls
by Anders Hansson 04 Aug '05

04 Aug '05

Hi all, I have a problem accounting transactions to the PSTN network. I do only get the Stop record - no Start record... Anyone knows what could be the reason? I´m using radiusserver for the accounting records. This is part of my ser.cfg file. In the log the messages INVITE accounted and BYE or CANCEL accounted can be seen, but nothing in the radius file, except for the stop record. To make it worse, not all of the stop records can be seen in radius - it looks like only some destinations creates stop records - other dont. The only thing about that is that when it´s a voicemachine in the other end, the stop record is not occuring... # Flag for accounting if (method=="INVITE") { log("INVITE accounted"); setflag(1); }; if (method=="BYE" || method=="CANCEL") { log("BYE or CANCEL accounted"); setflag(1); }; setflag(3); Thanks, Anders

1 0

[Serusers] Problem with SER and PAP2, I get a 407 message when trying a call
by Yiannis Martis 04 Aug '05

04 Aug '05

Hello there, I am Network Administrator working for a company called Hellasfon Network S.A. I use SER 0.9.3 with Vovidas STUN server. PAP2 UAis NATed and gets registered using my ADSL modems IP and everything looks OK. The problem is when I try to make a call to another UA) of my service I get the following output from my server (ngrep):. Please help me if u can!!! U 2005/08/03 13:55:57.380953 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 INVITE sip:2810318308@XXXXXXXXXX.com SIP/2.0. Record-Route: <sip:XX.XX.XX.XX;ftag=7ab32f2bbf2689feo0;lr=on>. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport=5060. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 INVITE. Max-Forwards: 16. Contact: <sip:2810300308@XX.XX.XX.XX:5060>. Expires: 240. User-Agent: Linksys/PAP2-2.0.12(LS). Content-Length: 420. Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER. Supported: x-sipura. Content-Type: application/sdp. . v=0. o=- 13486 13486 IN IP4 XX.XX.XX.XX. s=-. c=IN IP4 XX.XX.XX.XX. t=0 0. m=audio 16420 RTP/AVP 18 0 2 4 8 96 97 98 100 101. a=rtpmap:18 G729a/8000. a=rtpmap:0 PCMU/8000. a=rtpmap:2 G726-32/8000. a=rtpmap:4 G723/8000. a=rtpmap:8 PCMA/8000. a=rtpmap:96 G726-40/8000. a=rtpmap:97 G726-24/8000. a=rtpmap:98 G726-16/8000. a=rtpmap:100 NSE/8000. a=rtpmap:101 telephone-event/8000. a=fmtp:101 0-15. a=ptime:30. a=sendrecv. # U 2005/08/03 13:55:57.381212 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 SIP/2.0 407 Proxy Authentication Required. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport=5060. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a179. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 INVITE. Proxy-Authenticate: Digest realm="XXXXXXXXXX.com", nonce="42f0a3e9ea677d46038bdbeccaf8d95c18bce58e". Server: Sip EXpress router (0.9.3 (i386/linux)). Content-Length: 0. Warning: 392 XX.XX.XX.XX:5060 "Noisy feedback tells: pid=4360 req_src_ip=XX.XX.XX.XX req_src_port=5060 in_uri=sip:2810318308@XXXXXXXXXX.com out_uri=sip:2810318308@XXXXXXXXXX.com via_cnt==2". . # U 2005/08/03 13:55:57.381353 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 ACK sip:2810318308@XXXXXXXXXX.com SIP/2.0. Via: SIP/2.0/UDP XX.XX.XX.XX;branch=z9hG4bK9925.01a26607.0. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. Call-ID: b521746f-5119658a(a)192.168.1.2. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a179. CSeq: 102 ACK. User-Agent: Sip EXpress router(0.9.3 (i386/linux)). Content-Length: 0. . # U 2005/08/03 13:55:57.664069 XX.XX.XX.XX:5060 -> XX.XX.XX.XX:5060 ACK sip:2810318308@XXXXXXXXXX.com SIP/2.0. Via: SIP/2.0/UDP XX.XX.XX.XX:5060;branch=z9hG4bK-ae62fa6a;rport. From: <sip:2810300308@XXXXXXXXXX.com>;tag=7ab32f2bbf2689feo0. To: <sip:2810318308@XXXXXXXXXX.com>;tag=5f52b14eb2ca58a7910364a1cdbf6fd5.a179. Call-ID: b521746f-5119658a(a)192.168.1.2. CSeq: 102 ACK. Max-Forwards: 70. Proxy-Authorization: Digest username="2810300308",realm="XXXXXXXXXX.com",nonce="42f0a3e8f78926d700140a7c490f06dd965ea748",uri="sip:2810318308@XXXXXXXXXX.com",algorithm=MD5,response="ac73134a0de530d527cfbe4fe1903707". Contact: <sip:2810300308@XX.XX.XX.XX:5060>. User-Agent: Linksys/PAP2-2.0.12(LS). Content-Length: 0. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

1 0

RE: RE : [Serusers] is SER Dependable for prepaid System ? Anyone usingitfor prepaid system?
by Sam Lee 04 Aug '05

04 Aug '05

Dear all, How does the b2bua and the Jradius work ? It's the first time I've seen it. Does the billing system rely on radius ? I already have a SER running on digest authentication. How do I integrate them with this prepaid system? Regards, Sam -----Original Message----- From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Olivier Taylor Sent: Thursday, August 04, 2005 12:00 AM To: 'Iqbal'; 'Bruno Lopes F. Cabral' Cc: serusers(a)lists.iptel.org Subject: RE : [Serusers] is SER Dependable for prepaid System ? Anyone usingitfor prepaid system? With Jradius, we disconnect the user when credit limit is reached. Olivier -----Message d'origine----- De : serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] De la part de Iqbal Envoyé : mercredi 3 août 2005 14:58 À : Bruno Lopes F. Cabral Cc : serusers(a)lists.iptel.org Objet : Re: [Serusers] is SER Dependable for prepaid System ? Anyone usingit for prepaid system? but it dont do prepay, it is a rating engine I think, and shows you how much each call cost, i dont think it disconnects a call if they go above their credit limit Iqbal Bruno Lopes F. Cabral wrote: > Hello > > is CDRTool acurate? it seems not to need a B2BUA system > > Cheers > !3runo > > Olivier Taylor wrote: > >> I think the only clean way to do prepaid with ser is to use b2bua > > > as third party for billing, the only annoyance is that you have to > > manage the bandwidth for signaling. > >> Our side, we use B2bua, radius and Jradius for accounting. All the >> accounting logic is managed thru Jradius. > > > _______________________________________________ > Serusers mailing list > serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers > > . > _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users